320PX 400PX 460PX
32" 40" and 46" Professional LCD Displays ,
High 450 cd/m2 brightness Up to 3000:1 contrast ratio for detailed lights and darks Anti-image retention technologies improve panel longevity Built-in fans give you the option of horizontal or vertical operation, while always providing maximum cooling Built-in RS-232C interface allows you to easily control up to 25 displays from your PC with Samsungs MDC software
imagine communicating clearly without saying a word. The Samsung 400PX and 460PX LCD displays deliver your information and your messages in big, bold, bright fashion. In lobbies or in lunchrooms, these leading-edge displays feature up to 3000:1 contrast ratios and 450 nits brightness, for bright, detailed pictures. Built-in fans are configured to give you the option of either horizontal or vertical operation. And a built-in RS-232C interface makes it simple to control up to 25 displays from your PC. With the Samsung 400PX and 460PX LCD displays, its not hard to imagine.
Features High 450 cd/m Brightness The brighter your display, the more easily your message will be seen, even in brightly lit environments.

Specifications

Panel Diagonal Size Type Resolution Pixel Pitch (H x W) Brightness (Typ.) Contrast Ratio Viewing Angle (H/V) Response Time Color Space (CIE1931) Connectivity PC inputs Video Inputs Network Speaker (Optional) Power Power Consumption (Max) Power Consumption at Stand-by (Max) Power Supply Mechanical Spec VESA Mount Cabinet Color No Weight (Set/Package)
32" (16:9) S-PVA 1366 x 768 0.511 x 0.511 500cd/m2 3000:1 178/178 8ms 72% VGA/DVI/BNC CVBS/S-Video/Component N/A 10W x 2 160W 1W AC 100 - 240 V~ (+/- 10%), 50/60 Hz 200 x 200mm Black 33 lbs./47.2 lbs. NONE Dimension (W/O Stand) Dimension (With Stand) Packing Dimension Bezel Width Protection Glass 30.7" x 19" x 4.2" 30.7" x 20.9" x 8.8" 35.4" x 23.6" x 10.3" 40mm Optional 10C~40C/10C~35C 10~80% UL, CSA, TUV, NEMKO, EK, CCIB, PSB, GOST - Lamp Error Detection - Temperature Sensor - Built-in Fan - Video Wall - RS232C SP-L320PB(S) WMTL4001D Built-in Standard Quick Setup Guide, Warranty Card, Application CD D-Sub, Power Cord, Speaker Wire Remote Controller, Batteries, Stand Hole Cover, Semi Stand, BNC to RCA Jack, USB Holder
40" S-PVA 1366 x 768 0.648 x 0.cd/m2 3000:1 178/178 8ms 72% VGA/DVI/BNC CVBS/S-Video/Component N/A 10W x 2 210W 1W AC 100 - 240 V~ (+/- 10%), 50/60 Hz 600 x 400mm, 600 x 200mm, 200 x 200mm Black 49.4 lbs./65 lbs. 59.7 lbs./75.4 lbs. (With Protection Glass) 38.2" x 22.9" x 4.6" 38.2" x 24.8" x 8.8" 43.6" x 27.6" x 11" 40mm Optional 10C~40C/10C~35C 10~80% UL, CSA, TUV, NEMKO, EK, CCIB, PSB, GOST - Lamp Error Detection - Temperature Sensor - Built-in Fan - Video Wall - RS232C SP-L400PB(S) WMN-5770D Built-in Standard Quick Setup Guide, Warranty Card, Application CD D-Sub, Power Cord, Speaker Wire Remote Controller, Batteries, Stand Hole Cover, Semi Stand, BNC to RCA Jack, USB Holder
46" S-PVA 1366 x 768 0.7455 x 0.cd/m2 1200:1 178/178 8ms 72% VGA/DVI/BNC CVBS/S-Video/Component N/A 10W x 2 290W 1W AC 100 - 240 V~ (+/- 10%), 50/60 Hz 600 x 400mm, 600 x 200mm, 200 x 200mm Black 67.9 lbs./83.8 lbs. 78.9 lbs./94.8 lbs. (With Protection Glass) 43.4" x 25.9" x 5" 43.4" x 28.1" x 11.5" 49.1" x 32.4" x 12" 40mm Optional 10C~40C/10C~35C 10~80% UL, CSA, TUV, NEMKO, EK, CCIB, PSB, GOST - Lamp Error Detection - Temperature Sensor - Built-in Fan - Video Wall - RS232C SP-L460PB(S) WMN-5770D Built-in Standard Quick Setup Guide, Warranty Card, Application CD D-Sub, Power Cord, Speaker Wire Remote Controller, Batteries, Stand Hole Cover, Semi Stand, BNC to RCA Jack, USB Holder
High Contrast Ratio A contrast ratio of up to 3000:1 delivers the details. Whites dont blow out, blacks dont plug up. Anti-Image Retention Technologies Four different types of anti-image retention can be set to be activated automatically throughout the day, contributing to longer panel life. Built-in Fans Built-in fans are configured so that no matter if you hang the display horizontally or vertically, there are always two powered on at the top of the display. Our efficient cooling design gives you mounting options and contributes to longer panel life. Multi Display Control (MDC) The RS-232C port makes it easy to control up to 25 units from your PC. Just open the supplied MDC software, list the units to be controlled, and click on the functions to display.

Operation

400PX Dimensions

38.2"

Operating Temperature (Normal/Protection Glass) Humidity Regulations

Feature

Special Features
24.8" Optional items Speaker Wall Mount Stand Accessories
7.9" (VESA MOUNT) 46.5" 38.3" 38.2" 36.5" 23.6" (WALL MOUNT) 7.9" 7.9" 7.9"

(VESA MOUNT)

Manuals Cables

4.6" 2.4"

Others
15.7" (WALL MOUNT) 29.9" 37.0" 2.7"

22.0" 22.9"

Product Information: 1-866-542-7214 Product Support: 1-800-SAMSUNG

www.samsung.com/monitor

2008 Samsung Electronics America, Inc. Samsung is a registered mark of Samsung Electronics Corp., Ltd. Specifications and design are subject to change without notice. See www.samsung.com for detailed information. Printed in USA. LFD-400PX460PXDSHT-Jun08T_r1

SyncMaster 320PX

Select Language

Install Programs

PDF Manuals

Registration

Safety Instructions Introduction Connections Using the Software Adjusting the LCD Display Troubleshooting Specifications Information Appendix
2006 Samsung Electronics Co., Ltd. All rights reserved.

Main Page

Safety Instructions
Notational Power Installation Clean Others
Introduction Connections Using the Software Adjusting the LCD Display Troubleshooting Specifications Information Appendix
Please read the following safety instructions as they are designed to prevent damage to property and harm to the user. The color and appearance of the product may vary depending on the model, and the product specifications are subject to change without prior notice for reasons of performance enhancement.

Notational

Warning / Caution
Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment.

Notational Conventions

Prohibited Important to read and understand at all times

Do not disassemble

Disconnect the plug from the outlet

Do not touch

Ground to prevent an electric shock
When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode.
Do not use a damaged or loose plug.
This may cause electric shock or fire.
Do not pull the plug out by the wire nor touch the plug with wet hands.
Use only a properly grounded plug and receptacle.
An improper ground may cause electric shock or equipment damage.
Insert the power plug firmly so that it does not come loose.
A bad connection may cause fire.
Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.
Do not connect too many extension cords or plugs to one outlet.

This may cause fire.

Do not disconnect the power cord while using the LCD Display.
A surge may be caused by the separation and may damage the LCD Display.
Do not use the power cord when the connector or plug is dusty.
If the connector or plug of the power cord is dusty, clean it with a dry cloth. Using the power cord with a dusty plug or connector may cause an electric shock or fire.

Installation

Be sure to contact an authorized the Service Center, when installing your LCD Display in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your LCD Display.
Place your LCD Display in a location with low humidity and a minimum of dust.
Failure to do so may cause electric shock or fire inside the LCD Display.
Do not drop the LCD Display when moving it.
This may cause damage to the product or the person carrying it.
Install the LCD Display base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf.
Dropping the product may cause damage to the product or the person carrying it.
Do not place the product on an unstable or small surface area.
Place the product on an even and stable surface ,as the product may fall and cause harm to someone walking by, specifically children.

Do not place the product on the floor.
Take care, as someone, specifically children may trip over it.
Keep any flammable objects such as candles, insecticides or cigarettes away from the product.
Otherwise, this may cause fire.
Keep any heating devices away from the power cable.
A melted coating may cause electric shock or fire.
Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc.
Any increase in the internal temperature may cause fire.
Put down the LCD Display carefully.
Failing to do so may damage the LCD Display.
Do not place the LCD Display face down.
This may damage the TFT-LCD surface.
The installation of the bracket must be done by a qualified professional.
Installing the bracket by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual.
When installing the product, make sure to keep it away from the wall (more than 10 cm / 4 inches) for ventilation purposes.
Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance.
Keep the plastic packaging (bag) out of children's reach.
The plastic packaging (bag) may cause suffocation if children play with it.
When cleaning the LCD Display case or the surface of the TFT -LCD screen, wipe with a slightly moistened, soft fabric.
Do not spray water or detergent directly onto the LCD Display.
This may cause damage, electric shock or fire.
Use the recommended detergent with a smooth cloth.
If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth.
A dirty connector may cause electric shock or fire.
Make sure to unplug the power cord before cleaning the product.
Otherwise, this may cause electric shock or fire.
Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth.
Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent.
Contact the SAMSUNG customer care center or Customer Center for interior cleaning once a year.
Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause a malfunction or fire.

Others

Do not remove the cover (or back).
This may cause electric shock or fire. Refer to a qualified servicing company.
If your LCD Display does not operate normally - in particular, if there is any unusual sound or smell coming from the LCD Display unplug it immediately and contact an authorized dealer or the Service Center.

1995~2007 SAMSUNG. ALL Rights Reserved
Safety Instructions Introduction
Package Contents Your LCD Display Machanical Layout
Connections Using the Software Adjusting the LCD Display Troubleshooting Specifications Information Appendix
The color and appearance of the product may vary depending on the model, and the product specifications are subject to change without prior notice for reasons of performance enhancement.

Introduction

Package Contents
Note Please make sure the following items are included with your LCD Display. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Note This stand is not for the Floor Standing Type.

LCD Display

Manuals

Quick Setup Guide

Warranty Card (Not available in all locations)
User's Guide, MDC Software

Cables

D-Sub Cable

Power Cord

Speaker Wire Cable

Remote Control

Batteries (AAA X 2)

Cover-Hole

BNC to RCA Adaptor Jack

Semi Stand

Sold separately

Wall Mount KIT

Speaker Set

Stand KIT

DVI Cable

BNC Cable

Your LCD Display Front
Opens the on-screen menu and exits from the menu or closes the adjustment menu.
Navigate buttons (Up-Down buttons)
Moves from one menu item to another vertically or adjusts selected menu values.
Adjust buttons (Left-Right buttons)/ Volume buttons
Moves from one menu item to another horizontally or adjusts selected menu values.
Adjusts the audio volume.
Activates a highlighted menu item.

SOURCE

Switches from PC mode to Video mode. Changing the source is only allowed for external devices that are connected to the LCD Display at the time. [PC] [BNC] [DVI] [AV] [S-Video] [Component] >> Click here to see an animation clip.
Push the PIP button to turn the PIP screen On / Off. More than one PIP cannot overlap on screen as BNC and the component use the same terminal. >> Click here to see an animation clip. PC AV / S-Video / Component Mode BNC AV / S-Video Mode DVI AV / S-Video / Component Mode AV / S-Video PC / BNC / DVI Mode Component PC / DVI Mode

Power button

Turns the LCD Display On/Off.

Power indicator

Note The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display , causing a malfunction due to interference with the frequency.
1. ON / OFF 2. MAGICNET 3. MDC 4. LOCK 5. MagicNet buttons 6.+100 -/-7. VOL 8. MUTE
9. TTX/MIX 10. MENU 11. ENTER 12. P.MODE 13. AUTO 14. 15. 16. 17. 18. PRE-CH CH/P SOURCE INFO EXIT
19. Up -Down Left-Right buttons 20. S.MODE 21. STILL 22. FM RADIO 23. P.SIZE 24. 25. SRS DUAL/MTS
26. PIP 27. SOURCE 28. SWAP 29. SIZE

30. 31. 32. 33.

REW STOP PLAY/PAUSE FF

ON / OFF

MAGICNET
MagicNet Quick Launch Button. - This fuction does not work for this monitor.

MDC Quick Launch Button.

Activates or deactivates all function keys on both the remote control and the LCD Display except for the Power and LOCK buttons.

MagicNet buttons

Used for MagicNet. Alphanumeric: Used to enter the Internet address. DEL: Functions as the backspace. SYMBOL: Used to enter the symbols. (.O_-) ENTER: Used to enter values. - This fuction does not work for this m onitor.
+100 -/-Press to select channels over 100. For example, to select channel 121, press "+100", then press "2" and "1". - This fuction does not work for this m onitor.
Pauses (mutes) the audio output temporarily. This is displayed on the lower left corner of the screen. The audio resumes if MUTE or - VOL + is pressed in the Mute mode.

TTX/MIX

TV channels provide text information services via teletext. - This fuction does not work for this m onitor.
Opens the on-screen menu and exits from the menu screen or closes the screen adjustment menu.
P.MODE When you press this button, current picture mode is displayed on the lower center of the screen. AV / S-Video / Component : P.MODE The Monitor has four automatic picture settings that are preset at the factory. Then push button again to circle through available preconfigured modes. ( Dynamic Standard Movie Custom ) PC/DVI/BNC : M/B (MagicBright) MagicBright is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Then push button again to circle through available preconfigured modes. (Entertain Internet Text Custom )

This feature is available only for the displays whose power status is ON and if no selection is made, the factory default is displayed.

Settings Audio

Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide. When selected, each function fetches the value for the set and displays it on the slide bar. When "Select All" is chosen, the default value is displayed. Changing a value in this screen will automatically change the mode to "CUSTOM." 1) Audio - Controls audio settings for all input sources. 2) Bass - Adjusts Bass of the selected display. 3) Treble - Adjusts Treble of the selected display. 4) Balance - Adjusts Balance of the selected display. 5) SRS TSXT - SRS TSXT Sound ON/OFF of the selected display. 6) Sound Select - Select either Main or Sub when PIP is On. The Input source of MagicNet works only on MagicNet model. The Input source of TV works only on TV model. This feature is available only for the displays whose power status is ON and if no selection is made, the factory default is displayed.

Settings Image Lock

Info Grid shows some basic information necessary to Settings Control. 1) Image Lock - Available only for PC, BNC. 2) Coarse - Adjusts Coarse of the selected display. 3) Fine - Adjusts Fine of the selected display. 4) Position - Adjusts Position of the selected display. 5) Auto Adjustment - Self-Adjust to the incoming PC signal. The Input source of MagicNet works only on MagicNet model. The Input source of TV works only on TV model. Settings Control is available only for the displays for which the power status is ON.

Maintenance Lamp Control

1. Click on the "Maintenance" icon in the Main Icon column to display the Maintenance screen.
An "Info Grid" showing several basic data items appears. 1) Maintenance - Allows the Maintenance Control function for all input sources. 2) Auto Lamp Control - Automatically adjusts the backlight of the selected display at a specified time. The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control. 3) Manual Lamp Control - Allows you to adjust the backlight of the selected display regardless of the time. The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control. The Maintenance Control feature is available only for the displays whose power status is ON. The Input source of MagicNet works only on MagicNet model. The Input source of TV works only on TV model.

Settings Value Display In Multiple Display Mode
When there are more than one displays connected, the settings values are displayed as follows. 1. No selection: Displays the Factory Default Value. 2. Selected one display: Fetches and displays the settings value for the selected display. 3. Selected one display (ID1) and add another display (ID3): The program, which was displaying the settings value of ID 1, fetches and displays the value of ID3.
4. Selected all sets using Select All: Returns to the Factory Default Value.
Safety Instructions Introduction Connections Using the Software Adjusting the LCD Display
Input Picture [PC / BNC /DVI Mode] Picture [AV / S-Video / Component / DVI-Video Mode] Sound Setup Multi Control Direct Functions
Troubleshooting Specifications Information Appendix
Adjusting the LCD Display

Available Modes

PC / BNC / DVI AV S-Video Component DVI -Video

Source List

[ME NU] [ENTER] [ENTER] [ / ] [ENTER] Use to select PC, BNC, or other external input sources connected to the LCD Display. Use to select the screen of your choice.
1) PC 2) BNC 3) DVI 4) AV 5) S-Video 6) Component [The direct button on the remote control is the 'SOURCE' button.]
Note PIP turns off when the LCD Display is switched to an external source.
When external A/V devices such as VCRs or DVDs are connected to the LCD Display , PIP allows you to watch video from those devices in a small window super-imposed on the PC Video signal. (Off/On) Note More than one PIP cannot be overlapped on screen as BNC and the component use the same terminal.

1) PIP

[ME NU] [ENTER] [ / ] [ENTER] [ENTER] [ / ] [ENTER] Turns the PIP Screen Off/On.
- Off - On [The direct button on the remote control is the 'PIP ' button.] 2) Source
[ME NU] [ENTER] [ / ] [ENTER] [ / ] [ENTER] [ / ] [ENTER] Selects the input source for the PIP. - PC : AV / S-Video / Component Mode - BNC : AV / S -Video Mode - DVI : AV / S -Video / Component Mode - AV / S-Video : PC / BNC / DVI Mode - Component : PC / DVI Mode
[The direct button on the remote control is the 'SOURCE ' button.] 3) Swap
[ME NU] [ENTER] [ / ] [ENTER] [ / ] [ENTER] Swaps the contents of the PIP and main image. The image in the PIP window will appear on the main screen, and the main screen image will appear in the PIP window.

[The direct button on the remote control is the 'SWAP ' button.] 4) Size
[ME NU] [ENTER] [ / ] [ENTER] [ / ] [ENTER] [ / ] [ENTER] Changes the Size of the PIP window.
[The direct button on the remote control is the 'SIZE ' button.] 5) Position
[ME NU] [ENTER] [ / ] [ENTER] [ / ] [ENTER] [ / ] [ENTER] Changes the Position of the PIP window.

6) Transparency

[ME NU] [ENTER] [ / ] [ENTER] [ / ] [ENTER] [ / ] [ENTER] Adjusts the Transparency of PIP windows.
- High - Medium - Low - Opaque
Note If you select , , in Size, Position and Transparency will not be activated.

Available Modes: PIP ON

Edit Name
[ME NU] [ENTER] [ / ] [ENTER] [ / ] [ENTER] [ / ] [ENTER] Name the input device connected to the input jacks to make your input source selection easier.
1) PC 2) BNC 3) DVI 4) AV

5) S-Video 6) Component

Picture [PC / BNC /DVI Mode]

MagicBright

[ME NU] [ / ] [ENTER] [ENTER] [ / ] [ENTER] MagicBright is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Entertain, Internet, Text and Custom. Each mode has its own pre-configured brightness value. You can easily select one of the four settings by simply pressing the MagicBright control button.

1) Entertain

High brightness For watching motion pictures such as a DVD or VCD.

2) Internet

Medium brightness For working with a mixture of images such as the text with graphics added.

3) Text

Normal brightness For documentations or work involving a lot of text.

4) Custom

Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable for your eyes depending on your taste. If this is the case, Adjusts the brightness and contrast by using the OSD menu.
[The direct button on the remote control is the 'M/B' button.]

Custom

[ME NU] [ / ] [ENTER] [ / ] [ENTER] [ENTER] [ / ] / [< / >] [ENTER] By using the on-screen menus, the contrast and brightness can be changed to your personal preference.

1) Contrast

Adjusts the Contrast.

2) Brightness

Adjusts the Brightness. Note By adjusting the picture using the Custom function, MagicBright will change to Custom mode.

Color Tone

[ME NU] [ / ] [ENTER] [ / ] [ENTER] [ / ] [ENTER] The color tones can be changed.
1) Cool 2) Normal 3) Warm 4) Custom (Available in PC, BNC mode only)

Color Control

[ME NU] [ / ] [ENTER] [ / ] [ENTER] [ENTER] [< / >] [ENTER] Adjusts the individual R, G, B color controls. (Available in PC, BNC mode only)

1) Red 2) Green 3) Blue

Problems The screen is blank and the power indicator is off.
Ensure that the power cord is firmly connected and the LCD LCD Display is on. (Refer to the Connecting the LCD Display )
"Check Signal Cable" message.
Ensure that the signal cable is firmly connected to the PC or video sources. (Refer to the Connecting the LCD Display ) Ensure that the PC or video sources are turned on.
"Not Optimum Mode " message.
Check the maximum resolution and the frequency of the video Adaptor. Compare these values with the data in the Preset Timing Modes Chart.
The picture rolls vertically.
Check if the signal cable is securely connected. Re -connect it, if necessary. (Refer to Connecting to a Computer)
The image is not clear; picture is blurred.
Run Frequency Coarse and Fine tuning. Turn on again after removing all accessories (video extension cable, etc.) Set the resolution and frequency to the recommended ranges.
The picture image is unstable and shakes. Ghost images are shown in the picture.
Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display. If not, reset them referring to the current Information under the LCD Display menu and Preset Timing Modes.
The image is too light or too dark.
Adjusts the brightness and contrast. (Refer to the Brightness, Contrast)
The screen color is inconsistent. The color image is distorted by dark shadows. The color white is poor.
Adjust color using Custom under OSD Color Adjustment menu.
The power Indicator blinks green.
The LCD Display is currently saving the changes made to the settings to the OSD memory.
The screen is blank and the power indicator light is steady green or blinks every 0.5 or 1 seconds. The screen is blank and it is blinking.
The LCD Display is using its power management system. Press a key on the keyboard.
If you see the "TEST GOOD" message on the screen when you pressing the MENU button, check the cable connection between the LCD Display and the computer to ensure that the connector is properly connected.

Class B Equipment (Information Communication equipment for residential use) This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)

PowerSaver

This monitor has a built -in power management system called PowerSaver. This system saves energy by switching your monitor to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use the software utility installed on your computer to set up this feature.
Power Indicator Power Consumption

Normal Operation

Green Less than 160 W

Power saving mode

Green, Blinking Less than 1 W (Off-mode)
Power off EPA/ENERGY 2000
Amber Less than 1 W (Power button)

Power off

Black 0W (Power Switch)
This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Preset Timing Modes Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and Adjusts the screen as follows.

Horizontal Display Mode

MAC, 640 x 480 MAC, 832 x 624 IBM, 640 x 350 IBM, 640 x 480

Vertical Frequency (Hz)

66.667 74.551 70.086 59.940

Frequency (kHz)

35.000 49.726 31.469 31.469

Pixel Clock (MHz)

30.240 49.500 25.175 25.175

Sync Polarity (H/V)

-/+/+ +/ -/-
IBM. 720 x 400 VESA, 640 x 480 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x600 VESA, 800 x600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1360 x 768

31.469 37.500 37.861 43.269 35.156 37.879 48.077 46.875 53.674 48.363 56.476 60.023 68.677 47.712
70.087 75.000 72.809 85.008 56.250 60.317 72.188 75.000 85.000 60.004 70.069 75.029 85.997 60.000
28.322 31.500 31.500 36.000 36.000 40.000 50.000 49.500 56.250 65.000 75.000 78.750 94.500 85.500
-/+ -/-/-/+/+ +/+ +/+ +/+ +/+ -/-/+/+ +/+ +/+

Horizontal Frequency

The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz

Vertical Frequency

Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz 1995~2007 SAMSUNG. ALL Rights Reserved
Safety Instructions Introduction Connections Using the Software Adjusting the LCD Display Troubleshooting Specifications Information
For Better Display PRODUCT INFORMATION (Image Retention Free)

Appendix

Information

For Better Display

Adjust the computer resolution and screen inection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for TFT-LCD. Resolution: 1360 x 768 Vertical frequency (refresh rate): 60 Hz
TFT LCD panels manufactured by using advanced semiconductor technology with a precision of 1ppm (one millionth) and above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without any problems. For example, the number of TFT LCD sub pixels contained in this product are 3,133,440.
When cleaning the monitor and the panel outside, please apply the recommended small amount of cleaner by using a soft cloth to polish. Do not force the LCD area but rub softly. If excessive force is applied, you may stain it.
If you are not satisfied with the picture quality, you can get better quality of picture by performing the "auto adjustment function" in display screen that is appeared as window termination button is pressed. If there's still noise after the automatic adjustment, use the FINE/COARSE adjustment function.
When viewing a fixed screen for an extended period of time, a residual image or blurriness may appear. Change the mode to energy save or set a screensaver to move the picture when you need to be away from the LCD Display for an extended period of time.
PRODUCT INFORMATION (Image Retention Free)

Note ( Please check CD's User Guide at "OSD Function", some model's will not available )
Apply the Screen Pixel function on Product
Apply the Screen Pixel function - Symptom: Dot with Black Color move up and down.
- Select method. Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Pixel. Time Interval : 1 ~ 10 hours ( Recommend : 1 ). Time Period : 10 ~ 50 second ( Recommend : 50 ) Apply the Screen Bar function - Symptom: Horizontal / Vertical Bar with Black Color move up and down.
- Select method. Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Bar. Time Interval : 1 ~ 10 hours ( Recommend : 1 ). Time Period : 10 ~ 50 second ( Recommend : 50 )
Note ( Please check CD's User Guide at "OSD Function", some model's will not available. )
Apply the Screen Erasing function on Product Apply the Screen Erasing function - Symptom: 2 Vertical blocks move with erasing the display
- Select method. Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Eraser. Time Interval : 1 ~ 10 hours ( Recommend : 1 ). Time Period : 10 ~ 50 second ( Recommend : 50 )
Model Safety Instructions Introduction Connections Using the Software Adjusting the LCD Display Troubleshooting Specifications Information Appendix
Contact SAMSUNG WORLDWIDE
Contact SAMSUNG WORLDWIDE Terms Correct Disposal Authority
Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
North America U.S.A CANADA MEXICO
1-800-SAMSUNG (7267864) 1-800-SAMSUNG (7267864) 01-800-SAMSUNG (7267864) http://www.samsung.com http://www.samsung.com/ca http://www.samsung.com/mx
Latin America ARGENTINE BRAZIL CHILE COLOMBIA COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA TRINIDAD & TOBAGO VENEZUELA
0800-333-3733 4004-0000 800-726-7864 (SAMSUNG) 01-8000112112 0-800-507-7267 1-800-10-7267 800-6225 1-800-299-0013 1-800-234-7267 800-7267 1-800-682-3180 1-800-751-2676 1-800-7267-864 1-800-100-5303 http://www.samsung.com/ar http://www.samsung.com/br http://www.samsung.com/cl http://www.samsung.com.co http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin

Europe BELGIUM

http://www.samsung.com/be http://www.samsung.com/cz

CZECH REPUBLIC

DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL REPUBLIC OF IRELAND SLOVAKIA SPAIN SWEDEN SWITZERLAND U.K
( 0,15/min) 01805-121213 ( 0,14/Min) 06-80-SAMSUNG (7267864) 800 SAMSUNG (7267864) ( 0,10/Min) 0800-SAMSUNG (7267864) 1-800-SAMSUNG (7267864) 0870 SAMSUNG (7267864)

Interlace and Non-Interlace Methods
Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-Interlace method while showing odd lines and then even lines in turn is called the Interlace method. The Non-Interlace method is used for the majority of LCD Display s to ensure a clear image. The Interlace method is the same as that used in TVs.

Plug & Play

This is a function that provides the best quality screen for the user by allowing the computer and the LCD Display to exchange information automatically. This LCD Display follows the international standard VESA DDC for the Plug & Play function.
The number of horizontal and vertical dots used to compose the screen image is called the 'resolution'. This number shows the accuracy of the display. A high resolution is good for performing multiple tasks as more image information can be shown on the screen. Example: If the resolution is 1360 x 768 , this means the screen is composed of 1360 horizontal dots (horizontal resolution) and 768 vertical lines (vertical resolution).
Multiple Display Control (MDC)
A Multiple Display Control (MDC) is an application allowing various displays to be easily and simultaneously operated on a PC. RS-232C, a standard of serial communication, is used for communicating between a PC and a display.

Correct Disposal

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household waste at the end of its working life. To prevent possible harm to the environment or damage to health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.