320PX 400PX 460PX

32" 40" and 46" Professional LCD Displays ,
High 450 cd/m2 brightness Up to 3000:1 contrast ratio for detailed lights and darks Anti-image retention technologies improve panel longevity Built-in fans give you the option of horizontal or vertical operation, while always providing maximum cooling Built-in RS-232C interface allows you to easily control up to 25 displays from your PC with Samsungs MDC software
imagine communicating clearly without saying a word. The Samsung 400PX and 460PX LCD displays deliver your information and your messages in big, bold, bright fashion. In lobbies or in lunchrooms, these leading-edge displays feature up to 3000:1 contrast ratios and 450 nits brightness, for bright, detailed pictures. Built-in fans are configured to give you the option of either horizontal or vertical operation. And a built-in RS-232C interface makes it simple to control up to 25 displays from your PC. With the Samsung 400PX and 460PX LCD displays, its not hard to imagine.
Features High 450 cd/m Brightness The brighter your display, the more easily your message will be seen, even in brightly lit environments.

Specifications

Panel Diagonal Size Type Resolution Pixel Pitch (H x W) Brightness (Typ.) Contrast Ratio Viewing Angle (H/V) Response Time Color Space (CIE1931) Connectivity PC inputs Video Inputs Network Speaker (Optional) Power Power Consumption (Max) Power Consumption at Stand-by (Max) Power Supply Mechanical Spec VESA Mount Cabinet Color No Weight (Set/Package)
32" (16:9) S-PVA 1366 x 768 0.511 x 0.511 500cd/m2 3000:1 178/178 8ms 72% VGA/DVI/BNC CVBS/S-Video/Component N/A 10W x 2 160W 1W AC 100 - 240 V~ (+/- 10%), 50/60 Hz 200 x 200mm Black 33 lbs./47.2 lbs. NONE Dimension (W/O Stand) Dimension (With Stand) Packing Dimension Bezel Width Protection Glass 30.7" x 19" x 4.2" 30.7" x 20.9" x 8.8" 35.4" x 23.6" x 10.3" 40mm Optional 10C~40C/10C~35C 10~80% UL, CSA, TUV, NEMKO, EK, CCIB, PSB, GOST - Lamp Error Detection - Temperature Sensor - Built-in Fan - Video Wall - RS232C SP-L320PB(S) WMTL4001D Built-in Standard Quick Setup Guide, Warranty Card, Application CD D-Sub, Power Cord, Speaker Wire Remote Controller, Batteries, Stand Hole Cover, Semi Stand, BNC to RCA Jack, USB Holder
40" S-PVA 1366 x 768 0.648 x 0.cd/m2 3000:1 178/178 8ms 72% VGA/DVI/BNC CVBS/S-Video/Component N/A 10W x 2 210W 1W AC 100 - 240 V~ (+/- 10%), 50/60 Hz 600 x 400mm, 600 x 200mm, 200 x 200mm Black 49.4 lbs./65 lbs. 59.7 lbs./75.4 lbs. (With Protection Glass) 38.2" x 22.9" x 4.6" 38.2" x 24.8" x 8.8" 43.6" x 27.6" x 11" 40mm Optional 10C~40C/10C~35C 10~80% UL, CSA, TUV, NEMKO, EK, CCIB, PSB, GOST - Lamp Error Detection - Temperature Sensor - Built-in Fan - Video Wall - RS232C SP-L400PB(S) WMN-5770D Built-in Standard Quick Setup Guide, Warranty Card, Application CD D-Sub, Power Cord, Speaker Wire Remote Controller, Batteries, Stand Hole Cover, Semi Stand, BNC to RCA Jack, USB Holder

46" S-PVA 1366 x 768 0.7455 x 0.cd/m2 1200:1 178/178 8ms 72% VGA/DVI/BNC CVBS/S-Video/Component N/A 10W x 2 290W 1W AC 100 - 240 V~ (+/- 10%), 50/60 Hz 600 x 400mm, 600 x 200mm, 200 x 200mm Black 67.9 lbs./83.8 lbs. 78.9 lbs./94.8 lbs. (With Protection Glass) 43.4" x 25.9" x 5" 43.4" x 28.1" x 11.5" 49.1" x 32.4" x 12" 40mm Optional 10C~40C/10C~35C 10~80% UL, CSA, TUV, NEMKO, EK, CCIB, PSB, GOST - Lamp Error Detection - Temperature Sensor - Built-in Fan - Video Wall - RS232C SP-L460PB(S) WMN-5770D Built-in Standard Quick Setup Guide, Warranty Card, Application CD D-Sub, Power Cord, Speaker Wire Remote Controller, Batteries, Stand Hole Cover, Semi Stand, BNC to RCA Jack, USB Holder
High Contrast Ratio A contrast ratio of up to 3000:1 delivers the details. Whites dont blow out, blacks dont plug up. Anti-Image Retention Technologies Four different types of anti-image retention can be set to be activated automatically throughout the day, contributing to longer panel life. Built-in Fans Built-in fans are configured so that no matter if you hang the display horizontally or vertically, there are always two powered on at the top of the display. Our efficient cooling design gives you mounting options and contributes to longer panel life. Multi Display Control (MDC) The RS-232C port makes it easy to control up to 25 units from your PC. Just open the supplied MDC software, list the units to be controlled, and click on the functions to display.

Operation

400PX Dimensions

38.2"

Operating Temperature (Normal/Protection Glass) Humidity Regulations

Feature

Special Features
24.8" Optional items Speaker Wall Mount Stand Accessories
7.9" (VESA MOUNT) 46.5" 38.3" 38.2" 36.5" 23.6" (WALL MOUNT) 7.9" 7.9" 7.9"

(VESA MOUNT)

Manuals Cables

4.6" 2.4"

Others
15.7" (WALL MOUNT) 29.9" 37.0" 2.7"

22.0" 22.9"

Product Information: 1-866-542-7214 Product Support: 1-800-SAMSUNG

www.samsung.com/monitor

2008 Samsung Electronics America, Inc. Samsung is a registered mark of Samsung Electronics Corp., Ltd. Specifications and design are subject to change without notice. See www.samsung.com for detailed information. Printed in USA. LFD-400PX460PXDSHT-Jun08T_r1

SEC-VD-DSW Multiple Display Control
Multiple Display Control Protocol for SyncMaster 820DXn 700DXn 570Dxn 460Dxn 460TXn 400DXn
Copyright Samsung Electronics Co., Ltd

Address :

416, Maetan-3Dong, YoungTong-Gu, Suwon City, Kyungki-Do, Korea 442-742
Telephone : 82-31-277-2348,2325,2343 E-mail : jwon.park@samsung.com, ucroh@samsung.com, ys_nam@samsung.com
Author:: Display S/W2, Visual & Display Division. History: Version 1.0 Date 2007. 12. 10 Content Protocol for 400DXn, 460D(T)Xn, 570Dxn, 700Dxn, 820Dxn Author Park Jong Won Approved by

1. Overview

This document provides explanations of the MDC(Multiple Display Control) Protocols using the networks.

1.1. Purpose

This document provides an explanation of the software architecture commands and the data required for monitor control or status check. the network board utilizes Windows XPe which uses HAL API system. This document is designed for the Windows XPe application software programmer , system software engineer and tester (Programmer , Developer, Tester)

1.2. Scope

This document provides explanations of the protocols for network monitor control and status check. the network board has installed Windows XPe application that includes access for monitor check and control using the HAL API system. This document does not covers communications between the network board HAL software and the main board firmware, and communications between the network board and the server.
1.3. Terms & Abbreviations
MDC Protocol Multiple Display Control A Communications protocol is used to communications in this case between the network board HAL (Hardware Abstract Layer) and the Windows XPe Operating system HAL API Hardware Abstract Layer Application Programming Interface

2. API Function

Explains the APIs required for transferring data to and from the application.

1) MLS_HAL_I2C_Start

Protocol DWORD MLS_HAL_I2C_Start(void) Parameter None Return Value FALSE : Failed to start communications. TRUE : Communications started. Explanation Starts communicating with the monitor. If you want to communicate with the monitor firmware, you should perform this function first, or communicating will fail.

2) MLS_HAL_I2C_Stop

Protocol DWORD MLS_HAL_I2C_Stop(void) Parameter None Return Value FALSE : Terminating communications failed. TRUE : Communications terminated. Explanation Terminates communications with the monitor. If you want to end communicating with the moniter firmware, you should perform this function.

3) MLS_HAL_I2C_Send

Protocol DWORD MLS_HAL_I2C_Send(UCHAR *lpBuff, UCHAR length) Parameter UCHAR *lpBuff : Data transfer to the monitor firmware UCHAR length : lpBuff data length
Return Value FALSE : Data transfer failed TRUE : Data transferred Explanation Transfers data to the monitor.
3. Events from Library & Sample Code

1) Event from Library

Library sends an event to the application when it receives data from the firmware. The event is a Windows message,[::RegisterWindowMessage(_T("MSG_MDC_COMM"))]. However the application should respond to this [::RegisterWindowMessage(_T("MSG_MDC_COMM"))]. Windows message before it can receive data from library.
Command Data Length 0xFF 3

Ack/Nak 'A'

r-CMD 0x12

Val 1 Volume

Check Sum
Library transfers commands and data lengths to WPARAM, a Windows message parameter. However , Library sends data lengths other than the Command (0xFF) to higher-byte WPRAMs and transfers them other than the Check Sum to lower-byte WPRAMs. Ack/Nak 0x00 0x01 Contents NAK ACK
Note : For WPARAM commands of the [::RegisterWindowMessage(_T("MSG_MDC_COMM"))] Windows Message, 0xFF is an MDC event while 0x11 is a remote control event for the monitor. This document does not enter further into this as this belongs to MDC documentation. The remote control signals are mentioned separately in our documents.
2) Volume Control in Application
The data format mentioned in '4.1 Detailed Description of Commands' below is as follows. Command Data Length 0xData 1 Volume
The application can only retrieve data that corresponds to the parameter. Sample Code #define CMD_VOLUME { UCHAR SendBuff[3] = {0, 0, 0}; SendBuff[0] = CMD_VOLUME; //Volume Control Command SendBuff[1] = 0x01; //Data Length SendBuff[2] = data; //Volume Data DWORD dRetSend = MLS_HAL_I2C_Send(SendBuff, 3); } 0x12

3) When the Application Receives the Current Volume Values
For command explanations mentioned below, the data formats are as follows. Library receives data in the formats described below. Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x12 Val 1 Volume Check Sum
When library receives data from the firmware, it sends a Windows Message [::RegisterWindowMessage(_T("MSG_MDC_COMM"))] for confirmation, and transfers commands and data lengths to WPARAM, a Windows message parameter. When the application receives the [::RegisterWindowMessage(_T("MSG_MDC_COMM"))] Windows Message above, it can translate WPARAM and get the data that library received from the firmware. Sample Code const UINT MDC_COMM_MSG = ::RegisterWindowMessage(_T("MSG_MDC_COMM")); #define CMD_VOLMUE 0x12
WindowProc(UINT message, WPARAM wParam, LPARAM lParam) { if(message == MDC_COMM_MSG)//The Message that library receives data from the firmware { unsigned char* ReadBuff = (PUCHAR)wParam; if(ReadBuff[0] == 0xFF) { if((ReadBuff[2] == 0x01) // Replied data is ACK { if (ReadBuff[3] == CMD_VOLMUE) ) // Volume Data is received ShowVolume(ReadBuff[4]); } } //MDC Command

4. Command

No Type of Command Status Control Time Control On Time Control Off Time Control Video Control Audio Control RGB Control PIP Status Control Maintenance Control Display Status Control SW Version Control Model Number Control Power Control Volume Control Mute Control Input Source Control Image Size Control Direct Channel Control Contrast Control Brightness Control Sharpness Control Color Control Tint Control Red Gain Control Green Gain Control Blue Gain Control Treble Control Bass Control Balance Control Coarse Control Fine Control H-Position Control Command 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x0D 0x0E 0x10 0x11 0x12 0x13 0x14 0x15 0x17 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F 0x30 0x~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 1 Range of Value(Decimal) -
V-Position Control Clear Menu Control Remote Control RGB Contrast Control RGB Brightness Control PIP On/Off Control Auto Adjustment Control Color Tone Control Color Temperature Control PIP Source Control Main-PIP Swap Control PIP Size Control PIP Locate Control Sound Select Control Auto Lamp Control Manual Lamp Control Safety Screen Control Video Wall Mode Control Safety Lock Panel Lock OSD On/Off P. Mode Control S. Mode Control NR Mode Set PC Color Tone Control Auto AutoAdjustment All Keys Lock SRS TSXT Control Film Mode Signal Balance SB Gain SB Sharpness Panel On Time Video Wall On Temperature Control Brightness Sensor
0x32 0x34 0x36 0x37 0x38 0x3C 0x3D 0x3E 0x3F 0x40 0x41 0x42 0x43 0x47 0x57 0x58 0x5B 0x5C 0x5D 0x5F 0x70 0x71 0x72 0x73 0x75 0x76 0x77 0x78 0x79 0x7A 0x7E 0x7F 0x83 0x84 0x85 0x86
0 ~ 0 ~ ~ ~ ~ 0 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 1

10) Display Status Control
Function The Computer shows the Display status of the TV / Monitor Get Display status Command Data Length 0x0D 0
Ack Command 0xFF Val 3 Bright_Sensor

Data Length

Ack/Nak 'A' Val 4
r-CMD 0x0D Val 5 Cur_Temp

Val 1 Lamp Val 6 Fan

Val 2 Temperature

No_Sync

Lamp : The Error code for the lamp of the TV / Monitor (0 : Normal, 1: Error) Temperature : The Error code for the temperature of the TV / Monitor (0 : Normal, 1: Error) Bright_Sensor : The Error code for the Bright Sensor of the TV / Monitor (0 : Normal, 1: Error) No_Sync : The Error code for the Sync of the TV / Monitor (0 : Normal, 1: Error) Cur_Temp : The value code for the Current Temperature of the TV / Monitor Fan : The Error code for the Fan of the TV / Monitor (0 : Normal, 1: Error) Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x0D Val 1 ERR Check Sum

11) SW Version Control

Function The Computer shows the version information of the TV / Monitor Get SW Version Command Data Length 0x0E 0
Ack Command Data Length 0xFF Val 3 Version3 Val 9 Version9 Val 15 Version1 0x11 Val 4 Version4 Val 10 Version10
r-CMD 0x0E Val 5 Version5 Val 11 Version11
Val 1 Version1 Val 6 Version6 Val 12 Version12
Val 2 Version2 Val 7 Version7 Val 13 Version13 Val 8 Version8 Val 14 Version14
Version1 ~ Version11 : The Project Info of the TV / Monitor Version12 ~ Version15 : The SW Version of the TV / Monitor Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x0E Val 1 ERR Check Sum

12) Model Number Control

Function The Computer identifies and display the TV / Monitor's Model Number. Get Model Number Status Command Data Length 0x10 0
Ack Command Data Length 0xFF 0x05 Ack/Nak 'A' r-CMD 0x10 Val 1 Species Val 2 Model Val Check Sum
Species : Type of panel used used for the TV / Monitor 0x01 0x02 0x03 PDP LCD DLP
Model : TV / Monitor's model name 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E PPM50H2 PPM42S2 PS-42P2ST PS-50P2HT SyncMaster 400T SyncMaster 403T PPM42S3, SPD-42P3SM PPM50H3, SPD-50P3HM PPM63H3, SPD-63P3HM PS-42P3ST SyncMaster 323T SyncMaster 403T - CT40CS(N) PPMxxM5x SyncMaster 320P(n) SyncMaster 400P(n) SyncMaster 4600P(n)
Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x10 Val 1 ERR Check Sum

13) Power Control

Function The Computer turns the TV / Monitor ON/OFF. Get Power ON/OFF Status Command Data Length 0x11 0
Set Power ON/OFF Command Data Length 0xData 1 Power
Power : The Power Code for the TV / Monitor Power ON Power OFF
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x11 Val 1 Power Check Sum
Power : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x11 Val 1 ERR Check Sum

19) Contrast Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjusts the Contrast of the TV / Monitor. Get Contrast Status Command Data Length 0x24 0
Set Contrast Command Data Length 0xData 1 Contrast
Contrast : The Contrast Value Code of the TV / Monitor ( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x24 Val 1 Contrast Check Sum
Contrast : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x24 Val 1 ERR Check Sum
20) Brightness Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjusts the Brightness settings of the TV / Monitor Get Brightness Status Command Data Length 0x25 0
Set Brightness Command Data Length 0xData 1 Brightness
Brightness : The Brightness value code for the TV / Monitor( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x25 Val 1 Brightness Check Sum
Brightness : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x25 Val 1 ERR Check Sum
21) Sharpness Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjusts the Sharpness of the TV / Monitor. Get Sharpness Status Command Data Length 0x26 0
Set Sharpness Command Data Length 0xData 1 Sharpnes s
Sharpness : The Sharpness Value Code for the TV / Monitor ( 0 ~ 100 ) Note : Sharpness can be set up within 50 Step(0, 2, 4, 6. 100) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x26 Val 1 Sharpnes s Check Sum
Sharpness : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x26 Val 1 ERR Check Sum
22) Color Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjusts the Color settings of the TV / Monitor. Get Color Status Command Data Length 0x27 0
Set Color Command Data Length 0xData 1 Color
Color : The Color Value Code for the TV / Monitor ( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x27 Val 1 Color Check Sum
Color : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x27 Val 1 ERR Check Sum
23) Tint Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjusts the Tint of the TV / Monitor when the video format is NTSC Note : It does not work in PAL signal. Get Tint Status Command Data Length 0x28 0

Set Tint Command Data Length 0xData 1 Tint
Tint : The Tint Value Code for the TV / Monitor ( 0 ~ 100 ) R G Tint Value (100 - Tint) Value
Note : Tint can be set up within 50Step (0, 2, 4, 6. 100) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x28 Val 1 Tint Check Sum
Tint : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x28 Val 1 ERR Check Sum
24) Red Gain Control (PC, BNC, MagicNet Only)
Function The Computer adjusts the Red Gain of the TV / Monitor. Get Red Gain Status Command Data Length 0x29 0
Set Red Gain Command Data Length 0xData 1 Red
Red : The Red Gain Value Code for the TV / Monitor ( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x29 Val 1 Red Check Sum
Red : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x29 Val 1 ERR Check Sum
25) Green Gain Control (PC, BNC, MagicNet Only)
Function The Computer adjusts the Green Gain of the TV / Monitor Get Green Gain Status Command Data Length 0x2A 0
Set Green Gain Command Data Length 0x2A 1 Data 1 Green
Green : The Green Gain Value Code of the TV / Monitor ( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x2A Val 1 Green Check Sum
Green : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x2A Val 1 ERR Check Sum
26) Blue Gain Control (PC, BNC, MagicNet Only)
Function The Computer adjusts the Blue Gain of the TV / Monitor. Get Blue Gain Status Command Data Length 0x2B 0
Set Blue Gain Command 0x2B Blue : The Blue Gain Value Code of the TV / Monitor( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x2B Val 1 Blue Check Sum
Blue : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x2B Val 1 ERR Check Sum

27) Treble Control

Function The Computer adjusts the Treble of the TV / Monitor. Get Treble Status Command Data Length 0x2C 0
Set Treble Command Data Length 0x2C 1 Data 1 Treble
Treble : The Trable Value Code for the TV / Monitor ( 0 ~ 100 ) Note : Treble can be set up within 40 Step. (0, 2, 5, 7. 100) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x2C Val 1 Treble Check Sum

Treble : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x2C Val 1 ERR Check Sum

28) Bass Control

Function The Computer adjusts the Bass of the TV / Monitor. Get Bass Status Command Data Length 0x2D 0
Set Bass Command Data Length 0x2D 1 Data 1 Bass
Bass : The Bass Value Code for the TV / Monitor( 0 ~ 100 ) Note : Bass can be set up within 40 Step (0, 2, 5, 7. 100) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x2D Val 1 Bass Check Sum
Bass : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x2D Val 1 ERR Check Sum

29) Balance Control

Function The Computer adjusts the Balance settings of the TV / Monitor. Get Balance Status Command Data Length 0x2E 0
Set Balance Command Data Length 0x2E 1 Data 1 Balance
Balance : The Balance Value Code for the TV / Monitor ( 0 ~ 100 ) L R (100 - Balance) Value Balance Value
Nots : Balance can be set up within 22 Step (0, 4, 9, 13. 100) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x2E Val 1 Balance Check Sum
Balance : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x2E Val 1 ERR Check Sum
30) Coarse Control (PC, BNC Only)
Function The Computer adjusts the Coarse settings of the TV / Monitor. Get Coarse Status None Set Coarse Command Data Length 0x2F 1 Data 1 Coarse
Coarse : The Frequency Increase/Decrease Code for the TV / Monitor Increase Decrease
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x2F Val 1 Coarse Check Sum
Coarse : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x2F Val 1 ERR Check Sum
31) Fine Control (PC, BNC Only)
Function The Computer adjusts the Fine settings of the TV / Monitor. Get Fine Status None Set Fine Command Data Length 0xData 1 Fine
Fine : The Phase Increase/Decrease Code for the TV / Monitor Increase Decrease
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x30 Val 1 Fine Check Sum
Fine : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x30 Val 1 ERR Check Sum
32) H-Position Control (PC, BNC Only)
Function The Computer adjusts the Horizontal Position settings of the TV / Monitor. Get H-Position Status None Set H-Position Command Data Length 0xData 1 H-Pos

Contrast : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x37 Val 1 ERR Check Sum
37) RGB Brightness Control (PC, BNC, DVI, MagicNet Only)
Function The Computer adjusts the Brightness settings of the TV / Monitor when the Aspect is RGB Get Brightness Status Command Data Length 0x38 0
Brightness : The RGB Brightness Value Code for the TV / Monitor ( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x38 Val 1 Brightness Check Sum
Brightness : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x38 Val 1 ERR Check Sum

38) PIP On / Off Control

Function The Computer turns the PIP function of the TV / Monitor ON/OFF. This function is not avaliable for MagicNet Mode Get PIP ON/OFF Status Command Data Length 0x3C 0
Set PIP ON/OFF Command Data Length 0x3C 1 Data 1 PIP
PIP : PIP On/Off Code for the TV / Monitor PIP ON PIP OFF
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x3C Val 1 PIP Check Sum
PIP : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x3C Val 1 ERR Check Sum
39) Auto Adjustment Control (PC, BNC Only)
Function The Computer adjusts the RGB Screen settings of the TV / Monitor. Get Auto Adjustment Status None. Set Auto Adjustment Command Data Length 0x3D 1 Data 1 Auto
Auto : 0x00 (Always) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x3D Val 1 Auto Check Sum
Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x3D Val 1 ERR Check Sum
40) Color Tone Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjust the Color Tone setting of the TV / Monitor. Get Color Tone Status Command Data Length 0x3E 0
Set Color Tone Command Data Length 0x3E 1 Data 1 Color Tone
Color Tone : The Color Tone Value Code for the TV / Monitor( 0 ~ 4 ) 0x00 0x01 0x02 0x03 0x04 0x50 Cool 2 Cool 1 Normal Warm 1 Warm 2 Off
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x3E Val 1 Color Tone Check Sum
Color Tone : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x3E Val 1 ERR Check Sum

41) Color Temp Control

Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x43 Val 1 P.Locate Check Sum
P.Locate : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x43 Val 1 ERR Check Sum

46) Sound Select Control

Function The Computer adjust the Sound Settings of the TV/Monitor when the PIP function is on. Get Sound select Command Data Length 0x47 0
Set Sound select Command Data Length 0xData 1 S.Select
S.Select : The Sound select Code for TV / Monitor Main Sub
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x47 Val 1 S.Select Check Sum
S.Select : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x47 Val 1 ERR Check Sum

47) Auto Lamp Control

Function The Computer adjusts the Auto Lamp Function Settings of the TV / Monitor. When Manual Lamp Control is set to ON, Auto Lamp Control is turned Off automatically. Get Auto Lamp Command Data Length 0x57 0
Set Auto Lamp Command Data Length 0x57 Data 5 LMin_H 8 Data 6 LMin_M Data 1 LMax_H Data 2 Data 3 Data 4
LMax_M LMax_AP LMaxValue Data 8 LMinValue

Data 7 LMin_AP

Ack Command Data Length 0xFF Val 3 0x0A Val 4 Ack/Nak 'A' Val 5 r-CMD 0x57 Val 6 LMin_M Val 1 LMax_H Val 7 LMin_AP Val 2 LMax_M Val 8 LMinValue Check Sum

LMax_AP LMaxValue LMin_H

LMax_H : The value code for the Auto Lamp Max Time Hour of the TV / Monitor.(1 ~ 12) LMax_M : The value code for the Auto Lamp Max Time Minute of the TV / Monitor.(0 ~ 59) LMax_AP : The value code for the Auto Lamp Max Time AM/PM of the TV / Monitor. LMaxValue : The value code for the Auto Lamp Max Value of the TV / Monitor. (0 ~ 100) LMin_H : The value code for the Auto Lamp Min Time Hour of the TV / Monitor. (1 ~ 12) LMin_M : The value code for the Auto Lamp Min Time Minute of the TV / Monitor. (0 ~ 59) LMin_AP : The value code for the Auto Lamp Min Time AM/PM of the TV / Monitor. LMinValue : The value code for the Auto Lamp Min Value of the TV / Monitor.(0 ~ 100) Note : If LMinValue returns to 0xFF, it means Auto Lamp Control is in OFF mode. If Dynamic contrast is set to on, Auto Lamp Control is not work. Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x57 Val 1 ERR Check Sum

48) Manual Lamp Control

Function The Computer adjusts the Manual Lamp Function settings of the TV / Monitor. When Auto Lamp Control is set to ON, Manual Lamp Control is turned off automatically. Get Manual Lamp Status Command Data Length 0x58 0

Set Panel Lock Enable/Disable Command Data Length 0x5F 1 Data 1 Panel Lock
Lock : The Panel Key Lock On/Off code for the TV / Monitor Lock Unlock
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x5F Val 1 Panel Lock Check Sum
Lock : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x5F Val 1 ERR Check Sum

53) OSD On/Off

Function The Computer turns the OSD of TV/Monitor On/Off. When the OSD is On, the OSD is displayed on the screen. When the OSD is Off, the OSD is not displayed on the screen. Get OSD Enable Status Command Data Length 0x70 0
Set OSD Enable/Disable Command Data Length 0xData 1 OSD
OSD : The OSD On/Off code for the TV / Monitor OSD Enable OSD Disable
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x70 Val 1 OSD Check Sum
OSD : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x70 Val 1 ERR Check Sum

54) P.Mode Control

Function The Computer changes the Picture Mode of TV/Monitor. Get PMode Status Command Data Length 0x71 0
Set PMode Command Data Length 0xData 1 PMode
PMode : The Picture Mode code for the TV / Monitor Source AV S-Video Component HDMI ATV DTV PC BNC DVI MagicNet Data 0x00 0x01 0x02 0x03 0x10 0x11 0x12 0x13 Mode Dynamic Standard Movie Custom Entertain Internet Text Custom
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x71 Val 1 PMode Check Sum
PMode : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x71 Val 1 ERR Check Sum

55) S.Mode Control

Function The Computer changes the Sound Mode of TV/Monitor. Get SMode Status Command Data Length 0x72 0
Set SMode Command Data Length 0xData 1 SMode
SMode : The Sound Mode code for the TV / Monitor Data 0x00 0x01 0x02 0x03 0x04 Mode Standard Music Movie Speech Custom
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x72 Val 1 SMode Check Sum
SMode : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x72 Val 1 ERR Check Sum

56) NR Mode Set (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer changes the Digital NR Mode. Get NR Mode Status Command Data Length 0x73 0
Set NR Mode Command Data Length 0xData 1 NR Mode
NR Mode : The NR Mode On/Off code for the TV / Monitor NR Mode On NR Mode Off
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x73 Val 1 NR Mode Check Sum
NR Mode : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x73 Val 1 ERR Check Sum
57) PC Color Tone Control (PC, BNC , DVI, MagicNet only)
Function The Computer changes the Color tone of TV/Monitor. Get Color Tone Status Command Data Length 0x75 0
Set Color Tone Command Data Length 0xData 1 Color Tone
Color Tone : The Color Tone Valur Code for the TV / Monitor(1 ~ 3) Source PC DVI BNC Data 0x00 0x01 0x02 0x03 Mode Custom Cool Normal Warm
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x75 Val 1 Color Tone Chec k Sum
Color Tone : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x75 Val 1 ERR Check Sum

58) Auto AutoAdjustment

Function The Computer adjusts the Auto Adjustment of TV/Monitor Enable/Disable. Auto Adjustment is only available when the power is turned On. Get A.Adjustment Status Command Data Length 0x76 0
Set A.Adjustment Command Data Length 0xData 1 A.Adjustment
A.Adjustment : The Auto Adjustment Value Code for the TV / Monitor Enable Disable
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x76 Val 1 A.Adjustment Check Sum
A.Adjustment : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x76 Val 1 ERR Check Sum

59) All Keys Lock

Function The Computer switches both the Remote Control and the Panel Key Lock function ON/PFF. Available even if the power is turned OFF. Get All Key Status Command Data Length 0x77 0
Set All Key Lock/Unlock Command Data Length 0xData 1 All Key
All Key : The Key Lock On.Off Code for the TV / Monitor Lock Unlock
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x77 Val 1 All Key Check Sum
All Key : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x77 Val 1 ERR Check Sum

Wall_SNo : The Video Wall Number code for the TV / Monitor Set Number 1 2. Data 0x01 0x02. 0x18 0x19
Ack Command Data Length 0xFF 4 Ack/Nak 'A' r-CMD 0x89 Val 1 Val 2 Check Sum
Wall_Div : Same as above Wall_SNo : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x89 Val 1 ERR Check Sum

72) Model Name Control

Function The Computer shows the Model Name information of the TV / Monitor Get Model Name Status Command Data Length 0x8A 0
Ack Command Data Length 0xFF Val 6 0x12 Val 7 Ack/Nak 'A' Val_8 r-CMD 0x8A Val_9 Val 1 Val 2 Val_3 Val_4 Val_5
M_Name1 M_Name2 M_Name3 M_Name4 M_Name5 Val_10 Val 11 Val_12 Val_13
M_Name6 M_Name7 M_Name8 M_Name9 M_Name10 M_Name11 M_Name12 M_Name13 Val_14 M_Name14 Val_15 M_Name15 Val_16 M_Name16 Check Sum
M_Name1 ~ M_Name16 : The Model Name code for the TV / Monitor M_Name1 M_Name2 M_Name3 M_Name4 M_Name5 M_Name6 M_Name7 M_Name8 M_Name9 M_Name10 M_Name11 M_Name12 M_Name13 M_Name14 M_Name15 M_Name16 'S' 'y' 'n' 'c' 'M' 'a' 's' 't' 'e' 'r' '4' '0' '0' 'D' 'X' 'N'
73) MagicNet PIP (MagicNet Only)
Function The Computer turns the PIP function ON/OFF at MagicNet. Get MagicNet PIP status None Set MagicNet PIP On - (Data in Red font is for model 460Txn) Command Data Length 0xE0 Data 6 0x0C (0x13) Data 7

PIP ON

Data 1 H Position High-Byte Data 9 P.Source Data 17
Data 2 H Position Low-Byte Data 10 TV Channel Data 18 Minor_CH Low_Byte
Data 3 V Position High-Byte
Data 4 V Position Low-Byte
Data 5 H Size High-Byte Data 13 AirCable

0x01 Data 8

Data 11 Data 11 Data 12 S.Select Country ATV/DTV
H Size V Size Low-Byte High-Byte Data 14 Data 15

V Size Low-Byte Data 16

CH_NUM CH_NUM Minor_CH High_Byte Low_Byte Sel_Minor High_Byte
H Position High-Byte : The Position value code for PIP H-Start High-Byte. H Position Low-Byte : The Position value code for PIP H-Start Low-Byte. V Position High-Byte : The Position value code for PIP V-Start High-Byte. V Position Low-Byte : The Position value code for PIP V-Start Low-Byte. H Size High-Byte : The Size value code for PIP H-width High-Byte. H Size Low-Byte : The Size value code for PIP H-width Low-Byte. V Size High-Byte : The Size value code for PIP V-width High-Byte. V Size Low-Byte : The Size value code for PIP V-width Low-Byte. Note : The PIP Start Position and Size do not over 1366 X 768 or 1920 X 1080 P.Source : The Input source Code 0x14 0x1E 0x18 0x0C 0x04 0x08 0x21 0x30 0x40 PC BNC DVI AV S-Video Component HDMI TV DTV

TV Channel : Channel Number (0~99) Note : 460Txn Only S.Select : The Sound select Code MagicNet Sound PIP Sound
Country : The value code for the country of the TV / Monitor (0 : Korea, 1: U.S.A,.) ATV_DTV : The value code for the ATV/DTV of the TV / Monitor (0 : Analog TV, 1: Digital TV) AirCable : The value code for the Air/Cable of the TV / Monitor (0 : Air, 1: Cable) CH_NUM High_Byte : The value code for the Major Channel High-Byte of the TV / DTV (Analog TV : 1 ~ 135, Digital TV : 0 ~ 999) CH_NUM Low_Byte : The value code for the Major Channel Low-Byte of the TV / DTV (Analog TV : 1 ~ 135, Digital TV : 0 ~ 999) Sel_Minor : The value code for the Minor Channel Enable/Disable of the TV / Monitor (0 : Enable, 1 : Disable)(DTV Only) Minor_CH High_Byte : The value code for the Minor Channel High-Byte of the TV / Monitor (0 ~ 999)(DTV Only) Minor_CH Low_Byte : The value code for the Minor Channel Low-Byte of the TV / Monitor (0 ~ 999)(DTV Only) Ack(Data in Red font is for model 460Txn) Command Data Length 0xFF Val 5 H Size Low-Byte Val 13 ATV_DTV 0x15 Val 6 H Size High-Byte Val 14 AirCable Ack/Nak 'A' Val 7 r-CMD 0xE0 Val 8
Val 3 V Position Low-Byte
Val 4 V Position High-Byte
H Position H Position Low-Byte High-Byte Val 10 TV Channel
Val 11 S.Select Val 19 Minor_CH Low_Byte

Val 12 Country

V Size V Size Low-Byte High-Byte P.Source Val 15 CH_NUM High_Byte Val 16 CH_NUM Low_Byte Val 17
Val 18 Minor_CH High_Byte

Sel_Minor

H Position Low-Byte : Same as above H Position High-Byte : Same as above V Position Low-Byte : Same as above V Position High-Byte : Same as above H Size Low-Byte : Same as above H Size High-Byte : Same as above V Size Low-Byte : Same as above V Size High-Byte : Same as above P.Source : Same as above TV Channel : Same as above S.Select : Same as above Country : Same as above ATV_DTV : Same as above CH_NUM High_Byte : Same as above CH_NUM Low_Byte : Same as above Sel_Minor : Same as above Minor_CH High_Byte : Same as above Minor_CH Low_Byte : Same as above
Set MagicNet PIP Off (Data in Red font is for model 460Txn) Command Data Length 0xE0 0x0C 0x13

PIP Off

Ack (Data in Red font is for model 460Txn) Command Data Length 0xFF 0x0E 0x15 Ack/Nak 'A' r-CMD 0xE0
Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0xE0 Val 1 ERR Check Sum

74) Panel ON/OFF