When Air or Cable is selected first: After all Air or Cable channels are stored, the step for storing Satellite

channels is displayed.

When Satellite is selected first: After all Satellite channels are stored, the step for storing Air or Cable
Press the ENTERE button at any time to interrupt the memorisation process.
Setting the Clock Mode Time Zone Viewing the HD Connection Guide. Enjoy your TV. Set the Clock Mode automatically or manually. Press the or button to select Auto, then press the ENTERE button. Press the or button to select the your time zone, then press the ENTERE button. (depending on the country) The connection method for the best HD screen quality is displayed. Press the ENTERE button.
If You Want to Reset This Feature. Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is 0-0-0-0. If you want to change the PIN number, use the Change PIN function.
[UC8790_GER]BN68-02849B-00L02.indb 7

2010-04-01 7:17:46

Connecting to an AV Device
Using an HDMI or HDMI/DVI cable: HD connection (up to 1080p) Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver (STB) DVD / Blu-ray player

HDMI OUT

DVD / Blu-ray player

DVI OUT

AUDIO OUT

R-AUDIO-L

HDMI IN 1(DVI), 2(ARC), 3, 4, PC/DVI AUDIO IN
xx When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. For the DVI cable
connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the PC/DVI AUDIO IN jacks for audio. versions older than 1.4 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying flicker / abnormal colour). suspect the version is older than 1.4, contact the provider of the device to confirm the HDMI version and request an upgrade. Channel) function is only supported on HDMI IN 2(ARC). If 3D Auto View is On, some functions, such as Internet@TV, are disabled. If this is a problem, set 3D Auto View or 3D Mode to Off.
xx If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI xx If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you xx Samsung TVs support the HDMI 1.4 (with 3D and Audio Return Channel). However, the ARC(Audio Return
xx The ARC function enables digital output of sound using the HDMI IN 2(ARC) port and can only be operated
when the TV is connected to an audio receiver that supports the ARC function. The ARC Single mode is only enabled when the TV is connected to the device when using an HDMI Standard cable, HDMI High Speed cable, Hdmi Standard with Ethernet cable, HDMI High Speed with Ethernet cable. When the Input Source is the TV, the ARC function allows audio to be heard from a receiver. The audio is sent to a receiver from the TV via an HDMI cable without the need for a separate optical cable. connection error may occur.

No-Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary energy consumption, set how long you want the TV to remain on if its not receiving a signal.
Disabled when the PC is in power saving mode.
Natural is not available in PC mode.
Movie: Suitable for watching movies in a dark room.
[UC8790_GER]BN68-02849B-00L02.indb 17

2010-04-01 7:17:53

Changing the Picture Options

Advanced Settings

(available in Standard / Movie mode) You can adjust the detailed setting for the screen including colour and contrast. Dynamic Contrast, Gamma, White Balance and LED Motion Plus.
Colour Space (Auto / Native / Custom): Adjust the range of colours available to create the image. To adjust Colour, Red, Green, Blue and Reset, set Colour Space to Custom. White Balance: Adjust the colour temperature for a more natural picture. R-Offset / G-Offset / B-Offset: Adjust each colours (red, green, blue) darkness. R-Gain / G-Gain / B-Gain : Adjust each colours (red, green, blue) brightness. Reset: Resets the White Balance to its default settings. 10p White Balance (Off / On): Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
In PC mode, you can only make changes to
Black Tone Dynamic Contrast Gamma Expert Pattern RGB Only Mode Colour Space White Balance
: Off : Medium :0 : Off : Off : Native
Available when the picture mode is set to Movie Some external devices may not support this
function. and when the external input is set to HDMI or Component.

U Move E Enter R Return

Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth. Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast. Gamma: Adjust the primary colour intensity. Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern function, the picture can be calibrated without a generator or filter. If the OSD menu disappears or a menu other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears.
Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. Blue: Adjust the blue level. Reset: Resets the 10p White Balance to its default settings. Flesh Tone: Emphasize pink Flesh Tone. Edge Enhancement (Off / On): Emphasize object boundaries. xvYCC (Off / On): Setting the xvYCC mode on increases detail and colour space when watching movies from an external device (e.g. DVD player) connected to the HDMI or Component IN jacks.

While the Expert Pattern is running, sound is not Only enabled in DTV, Component and HDMI

modes. outputted.

RGB Only Mode (Off / Red / Green / Blue): You can adjust Colour or Tint (G/R) of Red, Green or Blue for the picture from an external device (DVD player, home theatre, etc.).
LED Motion Plus (Off / Normal / Cinema / Ticker): Removes drag from fast scenes with a lot of movement to provide a clear picture.
[UC8790_GER]BN68-02849B-00L02.indb 18

Picture Options

In PC mode, you can only make changes to the
Colour Tone, Size and Auto Protection Time.
Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
Colour Tone Size Screen Mode Digital Noise Filter MPEG Noise Filter HDMI Black Level Film Mode
xx When Double (, ) mode has been set in PIP,
the Picture Size cannot be set.
: Normal : Auto Wide : 16:9 : Auto : Auto : Normal : Off
xx Depending on the input source, the picture size
options may vary. selected mode. adjusted.
xx The available items may differ depending on the xx In PC mode, only 16:9 and 4:3 modes can be xx Settings can be adjusted and stored for each
external device connected to an input of the TV. or Component (1080i / 1080p) mode: Adjusts the Position or Size by using , , , button. input, 1 line will be cut at the top, bottom, left and right as in the overscan function.
xx After selecting Screen Fit in HDMI (1080i / 1080p) xx If you use the Screen Fit function with HDMI 720p
Screen Mode (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size.
Colour Tone (Cool / Normal / Warm1 / Warm2) picture mode is Dynamic.
Warm1 or Warm2 will be deactivated when the Settings can be adjusted and stored for each
external device connected to an input on the TV.
Size : Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio. 16:9 : Adjusts the picture size to 16:9 for DVDs or wide broadcasting. Wide Zoom: Magnifies the picture size more than 4:3. Adjusts the Position by using , buttons.

[[WARNING xx As the TV turns on, the left and right sides of 3D xx The 3D effect may be experienced differently
pictures may overlap more than usual. It may take time until the picture quality is optimized. depending on the viewer. You may not notice the 3D effect at all if you have a prescription for one eye that is very different from the other eye. when children or teenagers view 3D images.
xx Do not use the 3D Active Glasses for any other
xx Parents careful supervision is required particularly xx Photosensitive Seizure Warning and Other Health
Risks Some viewers may experience an epileptic seizure or stroke when exposed to certain flashing images or lights contained in certain television pictures or video games. If you or any of your relatives has a history of epilepsy or strokes, please consult with a medical specialist before using the 3D function. Even those without a personal or family history of epilepsy or stroke may have an undiagnosed condition that can cause photosensitive epileptic seizures. Do not watch 3D pictures when you feel incoherent, sleepy, tired or sick. Avoid watching 3D pictures for long hours.
xx Immersive video can potentially have adverse effects
xx The ideal viewing distance should be three times
[UC8790_GER]BN68-02849B-00L02.indb 20

2010-04-01 7:17:54

This exciting new feature enables you to 3D view 3D content. In order to fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses (SSG2100AB, SSG-2200AR, SSG-2200KR) to view 3D video. Samsung 3D Active Glasses are sold separately. For more detailed purchasing information, contact the retailer where you purchased this TV.
Side by Side and Top & Bottom are available Vertical Strip, Line by Line and Checker
when the resolution is set to PC. when the resolution is 720p, 1080i and 1080p in DTV, HDMI and USB mode or set to PC connecting through HDMI/DVI cable.
Frequency displays the frequency (60Hz only)
Board are available when the resolution is set to PC connecting through HDMI/DVI cable.
3D 2D (Off / On): Displays the image for the left eye only. 2D 3D or Off.
This function is deactivated when 3D Mode set to This function is deactivated when 3D Mode set to

2D 3D or Off.

3D View point: The overall adjustment of 3D perspective.

3D emitter

Depth: Adjusts focus / depth in 2D 3D mode.
If there is any obstacle between the emitter and 3D
Active Glasses, the proper 3D effect may not be obtained. 3D Mode: Select the 3D input format.
This function is only activated when the 3D Mode

is 2D 3D.

Picture Correction: Adjusts the images for the left and right eye. 3D Auto View (Off / On): If 3D Auto View is set to On, a Side-By-Side format HDMI signal with one of the resolutions below is automatically switched to 3D. Here, correct 3D information must be sent from the HDMI 1.3 transmitter. set 3D Auto View to Off and manually select a 3D Mode using the 3D button or corresponding menu.

xx If there is no music file on the USB device or the xx When there is only one photo file in the USB
device, the Slide Show will not play. selected.
folder containing a music file is not selected, the Timer function does not operate correctly.
The antenna must be connected in order to set

the time automatically.

xx If a folder name is too long, the folder cannot be xx Each USB you use is assigned its own folder.
When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.
Clock Set: Set the Day, Month, Year, Hour and Minute manually. Available only when Clock Mode is set to Manual.
Time Zone (depending on the country): Select your time zone. When Country is set to Others, you can use this function.
This function is only available when the
Clock Mode is set to Auto.
[UC8790_GER]BN68-02849B-00L02.indb 25

2010-04-01 7:17:57

Auto Power Off (available only when the TV is turned on

Locking Programmes

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer. The c mark indicates the day is selected.

Subtitle

Use this menu to set the Subtitle mode. Subtitle (Off / On): Switches subtitles on or off. Mode (Normal / Hearing Impaired): Sets the subtitle mode. Subtitle Language: Sets the subtitle language.
by Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.
If the programme you are watching does not

Security

English is the default in cases where the selected
language is unavailable in the broadcast.
support the Hearing Impaired function, Normal automatically activates even if the Hearing Impaired mode is selected.
The PIN input screen appears before the setup screen. Enter your 4-digit PIN, the default of which is 0-0-0-0.
Change the PIN using the Change PIN option. Child Lock (Off / On): Lock channels in Channel Manager, to prevent unauthorized users, such as children, from watching unsuitable programme.
Digital Text (Disable / Enable)
(UK only) If the programme broadcasts with digital text, this feature is enabled.
Available only when the Input source is set to TV.
Parental Lock (depending on the country): Prevent unauthorized users, such as children, from watching unsuitable programme with a user-defined 4-digit PIN code. If selected channel is locked, the \ symbol will be displayed. Allow All: Unlock All TV ratings. Change PIN: Change your personal ID number required to set up the TV.

To use the SWL(Samsung Wireless Link) function, connect to the USB 1 (HDD) port.
TV Rear Panel The LAN Port on the Wall Wireless IP sharer (AP having DHCP server) or
Samsung Wireless LAN Adapter
Samsungs Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts. com. Samsungs Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung recommends using IEEE 802.11N. When you play the video over a IEEE 802.11B/G connection, the video may not play smoothly.
xx You must use the Samsung Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless

network.

xx Samsungs Wireless LAN adapter is sold separately. The Samsung Wireless LAN adapter is offered by select
retailers, Ecommerce sites and Samsungparts.com.
xx To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports
DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.
xx Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
xx If you apply a security system other than the systems listed blow, it will not work with the TV. xx If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP or TKIPxx If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button
AES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications. Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
xx If your router, modem, or device isnt certified, it may not connect to the TV via the Samsung Wireless LAN Adapter. xx Connection Methods: You can setup the wireless network connection six ways.
Samsung Auto Configuration PBC (WPS) Auto Setup (Using the Auto Network Search function) Manual Setup SWL(Samsung Wireless Link) Ad-Hoc
xx The Samsung Wireless LAN Adapter may not be recognized or work properly when connecting via a USB hub or via
a USB extension cable other than the one available from Samsung.
[UC8790_GER]BN68-02849B-00L02.indb 32

2010-04-01 7:18:02

Notice The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter. In such a case, establish a connection using one of the following methods or connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference. Method 1 Connect using the USB right angle adapter Method 2

To use the Internet@TV, the AP (access point) must be
If a Samsung Wireless LAN Adapter is connected to the Only sharers using the 2.4 Ghz band are supported.
Sharers using the 5 Ghz band are not supported. USB 2 port, the network may not operate normally. We recommend to connecting it to the USB 1 (HDD) port.

SWL connect

Wireless Link) is set to On. How to connect Samsung Wireless Link
You can directly connect a device that supports the PBC (WPS) to the TV.
For the procedures to establish a connection, refer to the following: 1. Follow Steps 1 through 5 in the How to set up using PBC (WPS) (p. 33). 2. Select SWL(Samsung Wireless Link) by using the button and press the ENTERE button to turn it On. 3. Select SWL connect by using the button and press the ENTERE button. 4. If the Press the PBC button on the PBC(WPS) supported device to connect within 120 seconds. message appears, press the PBC button on the device to connect. setup manual of the device to be connected.
For more information, refer to the wireless network
5. If the device is connected properly to the TV after starting count on message box then message box will be disappeared automatically.
If the connection fails, please retry after 2 minutes.
[UC8790_GER]BN68-02849B-00L02.indb 36

Media Play

dvancedFeatures A
Enjoy recorded tv, photos, music and/or movie files saved on a USB Mass Storage Class (MSC) device and/or your PC.

MediaPlay Recorded TV

Change Device
View Devices E Enter R Return

onnectingaUSBDevice C

1 . Turn on your TV. 2 . Connect a USB device containing recorded tv, photo, music and/or movie files to the USB1(HDD) or USB2 jack on the side of the TV. 3 . When USB is connected to the TV, popup window appears. Then you can select MediaPlay.

USB Drive

onnectingtothePCthroughnetwork C
You can play pictures, music and videos saved on your PC through a network connection in the MediaPlay mode.
If you use MediaPlay through saved file on your PC, you should download PC Share Manager and users manual from

www.samsung.com.

PC LAN
Samsung Wireless LAN Adapter LAN Adapter External Modem (ADSL/VDSL/Cable TV)

Wireless IP Sharer

Modem Cable LAN Cable LAN Cable LAN Cable
1 . For more information on how to configure your network, refer to Network Connection (p. 30). You are recommended to locate both TV and PC in same subnet. The first 3 parts of the subnet address of the TV and the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address: 123.456.789.**) 2 . Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager programme will be installed. You can connect the TV to the PC directly without connecting it through a Sharer (Router).
[UC8790_GER]BN68-02849B-00L02.indb 37

2010-04-01 7:18:05

No supported functions when connecting to the PC through network:
xx The Background Music and Background Music Setting functions. xx Sorting files by preference in the Photos, Music, and Videos folders. xx The (REW) or (FF) button while a movie is playing.
The Divx DRM, Multi-audio, embedded caption does not supported. Samsung PC Share manager should be permitted by the firewall programme on your PC. When you use Media Play mode through a network connection, According to functions of the provided server:
xx The sorting method may vary. xx The scene search function may not be supported. xx The Play Continuously function, which resumes playing of a video, may not be supported.
The Play Continuously function does not support multiple users. (It will have only memorised the point where the most recent user stopped playing.)
It might not work properly with unlicenced multimedia files. Need-to-Know List before using Media Play
xx The or button may not work depending on the content information. xx You may experience file stuttering while playing a video in Media Play through a network connection. xx MTP (Media Transfer Protocol) is not supported. xx The file system supports FAT16, FAT32 and NTFS. xx Certain types of USB Digital camera and audio devices may not be compatible with this TV. xx Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TVs USB port. SAMSUNG is not responsible for any data file damage or data loss.

xx Recorded videos are DRM (digital rights management) protected and cannot be played on a PC or other TVs, nor can
they be played when the main board of the TV is changed.
xx Data broadcasts cannot be recorded. xx The availability of both recording and the Timeshift Mode function may differ depending on picture quality and the
free space on the hard disk drive. broadcast.
xx If you press the or button, you can see the current channel being on air, or can see the start point the recorded xx The Timeshift Mode operates for a maximum of 90 minutes. xx After the Timeshift Mode function has run for the maximum time, the time information will be fixed to 00:00:00.
Note that if you have paused the recording the TV will automatically resume playback.
xx If the 5% free memory space limit of the USB storage device is reached, the current recording process will be closed. xx When recording is performed by both the PVR (Personal Video Recorder) function and a device that supports the
HDMI-CEC feature, recording by the PVR function takes precedence.
xx During a playback or the Timeshift Mode, the picture will be displayed according to the display settings of the TV. xx If you change the input source during recording, the screen will go blank until the change is completed. xx An application which supports neither the recording nor the Timeshift Mode function will close automatically if you
try to use it during either function. function is closed.
xx A message may appear in front of the application window indicating that the recording or the Timeshift Mode xx Timeshift Mode function is not supported for radio channels. xx The recording and the Timeshift Mode functions are disabled for channels locked with Child Lock. xx If the USB device has failed the Device Performance Test, the USB device must go through the Device Format and
Device Performance Test again before you record with the Guide or Channel Manager. Device Performance Test.
xx The recording and Timeshift Mode functions can only be used with a USB storage device that completed the xx If you attempt the recording or Timeshift Mode function with a device that did not have the Device Performance

the TV is connected to an audio receiver that supports the ARC function.
xx When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
the Home Theatres Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV.
xx Connect only one Home Theatre. xx You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions. xx Anynet+ works when the AV device supporting Anynet+ is in the standby or on status. xx Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
[UC8790_GER]BN68-02849B-00L02.indb 46

2010-04-01 7:18:13

Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu View TV Device List (device_name) MENU (device_name) INFO Recording: (*recorder) Stop Recording: (*recorder) Receiver Description Changes Anynet+ mode to TV broadcast mode. Shows the Anynet+ device list. Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear. Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear. Starts recording immediately using the recorder. (This is only available for devices that support the recording function.) Stops recording. Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).

Setting Up Anynet+

Setup Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.

Using the ARC function You can listen to sound through a receiver connected HDMI cable without the need for a separate optical cable. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. HDMI IN 2(ARC) port.
To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the To disable the ARC function, set the Receiver to Off. Even if the TV transmits the ARC signal continuously, the
receiver will be blocked from receiving the signal.
[UC8790_GER]BN68-02849B-00L02.indb 48
Troubleshooting for Anynet+
Problem Anynet+ does not work. Possible Solution Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. Connect only one receiver (home theatre). Check if the Anynet+ device power cord is properly connected. Check the Anynet+ devices Video/Audio/HDMI cable connections. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Check whether the TV remote control is in TV mode. Check whether it is Anynet+ exclusive remote control. Anynet+ doesnt work in certain situations. (Searching channels, operating Media Play or Plug & Play (Initial setup), etc.) When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off and on again. Check if the Anynet+ Function of Anynet+ device is set on. Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. Press the TOOLS button to display the Anynet+ menu and select a menu you want. Select View TV in the Anynet+ menu. Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. Press P >/<, and PRE-CH to change the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.) You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. Use the remote control when the Anynet+ setting or switching to view mode is complete. You cannot use the play function when Plug & Play (Initial setup) is in progress. Check whether or not the device supports Anynet+ functions. Check whether or not the HDMI cable is properly connected. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Search Anynet+ devices again. You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+ functions. If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure, please repeat the device scan. Check whether the antenna jack on the recording device is properly connected. Connect the optical cable between TV and the receiver. The ARC function enables digital output of sound using the HDMI IN 2(ARC) port and can only be operated when the TV is connected to an audio receiver that supports the ARC function.

connected device.

An alarm window appears informing the user that the media contents (videos, photos, music) sent from a mobile phone will be displayed on your TV. The contents are played automatically 3 seconds after the alarm window appears. If you press the RETURN or EXIT button when the alarm window appears, the media contents are not played.

My Mobile

xx If the media function executes for the first time,
the warning popup windows appears. Press the ENTERE button to select Allow, then you can use Media function on that device.
Unknown Device 0 is requesting that the media file be allowed to play. If you wish to allow the media file to be played at your device, please press Allow, otherwise press Deny. You can also change the setting (or resetting) of this feature at AllShare Setup. Warning: Please note that if your device is connected to unsecured or unfamiliar network, unwanted or inappropriate contents might be played. If you are not sure about the network's identity or contents appropriateness, we strongly recommend that you do not Allow the request to play. Contacts Calendar Doc viewer E Select Return
Using your Samsung phone to control your TV Simply Before you can use this feature, you must connect to a Samsung mobile phone that supports ScreenShare functions. When operating the TV with your mobile phone, only the POWER, Y, P</> and MUTE buttons are supported.
xx To turn off the media contents transmission from
the mobile phone, set Media to Off in the AllShare setup. on their resolution and format.
Even if you keep pressing down on a control button
xx Contents may not be played on your TV depending xx The ENTERE and / buttons may not work
depending on the type of media content.
(channel or volume) on the mobile phone, the value will only go up or down by one unit.
xx Using the mobile device, you can control the media
playing. For details, refer to each mobiles users guide.
xx When you want to play media contents from
your PC, select the PC icon on the main display of AllShare. Then the TVs Media Play menu automatically changes. For more detail information, refer to Media Play (p. 37).
[UC8790_GER]BN68-02849B-00L02.indb 54

2010-04-01 7:18:18

Analogue Channel Teletext Feature
The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.

05 Other Information

You can change Teletext pages by pressing the numeric buttons on the remote control.
1 / (Teletext on/mix/off): Activates the Teletext mode for the current channel. Press the button twice to overlap the Teletext mode with the current broadcasting screen. Press it one more time to exit teletext. (store): Stores the Teletext pages. (size): Displays the teletext on the upper half of the screen in double-size. To move the text to the lower half of the screen, press it again. For normal display, press it once again. (hold): Holds the display at the current page, in the case that there are several secondary pages that follow automaticially. To undo, press it again. 5 Colour buttons (red, green, yellow, blue): If the FASTEXT system is used by the broadcasting company, the different topics on a Teletext page are colour-coded and can be selected by pressing the coloured buttons. Press the colour corresponding to the topic of your choice. A new colourcoded page is displayed. Items can be selected in the same way. To display the previous or next page, press the corresponding coloured button. (mode): Selects the Teletext mode (LIST/ FLOF). If pressed during LIST mode, switches the mode to List save mode. In List save mode, you can save a Teletext page into a list using the 8(store) button. (sub-page): Displays the available sub-page.

TTX/MIX

2 (page up): Displays the next Teletext page. 3 (page down): Displays the previous Teletext page. 6 (index): Displays the index (contents) page at any time while you are viewing Teletext. 5 (reveal): Displays the hidden text (answers to quiz games, for example). To display the normal screen, press it again. 7 (cancel): Shrinks the Teletext display to overlap with the current broadcast. Typical Teletext page

Part A B C D E F

Contents Selected page number. Broadcasting channel identity. Current page number or search indications. Date and time. Text. Status information. FASTEXT information.