Included battery may vary depending on sales region.

INFORMATION

Important information about battery usage When the camera is not used, turn off the camera power. Please remove the battery if the camera will not be used for long periods. Battery can lose power over time and are prone to leaking if kept inside the camera. Low temperatures (below 0C) can affect the performance of the battery and you may experience reduced battery life. Batteries will usually recover at normal temperatures. During extended use of the camera, the camera body may become warm. This is perfectly normal.
There are 4 indicators for battery condition that are displayed on the LCD monitor. Battery indicator Battery status The battery is fully charged Low battery capacity Low battery capacity Low battery capacity (Prepare to recharge (Prepare to recharge (Prepare to recharge or use spare battery) or use spare battery) or use spare battery)
Insert the battery as shown - If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+ / -). - When the battery chamber cover is opened, do not press the battery chamber cover by force. This may cause damage to the battery chamber cover.
Inserting the memory card
Insert the memory card as shown. - Turn off the cameras power before inserting the memory card. - Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera (LCD monitor). - Do not insert the memory card the wrong way round. Doing so may damage the memory card slot.
Instructions on how to use the memory card
Be sure to format the memory card (see p.57) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory cards performance. Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty. The memory card is an electronic precision device. Do not bend, drop or subject the memory card to any heavy impact. Do not store the memory card in an environment with strong electronic or magnetic fields, e.g. near loud speakers or TV receivers. Please do not use or store in an environment where there are extremes in temperature. Do not allow the memory card to become dirty or to come into contact with any liquid. Should this happen, clean the memory card with a soft cloth. Please keep the memory card in its case when not in use. During and after periods of extended use, you may notice that the memory card is warm. This is perfectly normal. Do not use a memory card that is used in another digital camera. To use the memory card in this camera, format the memory card using this camera. Do not use a memory card formatted by another digital camera or memory card reader.

Stop:Shutter

REC: /
[Successive recording of a movie clip]
Recording the movie clip without voice You can record the movie clip without voice. 1. Press the Up button and the ( ) icon will display on the LCD monitor. 2. Press the shutter button and movie clip is recorded for as long as the available recording time without voice. 3. To stop the recording, press the shutter button again.

[ MOVIE CLIP mode ]

Night / Portrait / Children mode Rotate the mode dial to select a desired mode. - Night mode : Use this for still images at night or in other dark conditions - Portrait mode : To take a picture of a person - Children mode : To take a still picture of moving children
How to use the SCENE mode ( ) Use the menu to easily configure optimal settings for a variety of shooting situations. These include LANDSCAPE, CLOSE UP, SUNSET, DAWN, BACKLIGHT, FIREWORKS and BEACH & SNOW scenes. 1. Select the SCENE mode by rotating the mode dial. 2. Press the menu button and select a desired scene menu.

[SCENE mode]

[Night mode]

[Portrait mode]

[Children mode]
The scene modes are listed below. [Landscape] ( ) : To take pictures of distant scenery. [Close up] ( ) : Close-up shooting for small objects such as plants and insects. [Sunset] ( ) : For taking pictures of sunsets. [Dawn] ( ) : Daybreak scenes. [Backlight] ( ) : Portrait without shadows caused by backlight. [FIirework] ( ) : Firework scenes. [Beach&Snow] ( ) : For ocean, lake, beach and snowscape scenes.
Things to Watch Out for When Taking Pictures
Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture.
How to use the VOICE RECORDING mode ( ) 1. In any mode with the exception of Movie clip mode, select the VOICE RECORDING mode by pressing the Voice recording button twice. 2. Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recording time (Max : 1 hour) allows. The recording time will be displayed on the LCD monitor. Voice will still be recorded if the shutter button is released. - If you wish to stop recording, press the shutter REC:Shutter EXIT: button again. - File type : *.wav [ VOICE RECORDING mode ] * A distance of 40cm between you and the camera (microphone) is the best distance to record sound.

To focus on a subject not positioned in the centre of the picture, use the focus lock function. Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame. 2. Press the SHUTTER button halfway. When the green auto focus frame lights up, it means the camera is focused on the subject. Be careful not to press the SHUTTER button all the way down to avoid taking an unwanted picture. 3. With the SHUTTER button still pressed down only halfway, move the camera to recompose your picture as desired, and then press the SHUTTER button completely to take the picture. If you release your finger from the SHUTTER button, the focus lock function will be cancelled.
Available focusing method, by recording mode (O: Selectable , X: Not selectable, : Infinity focus range) Mode Normal Macro Auto macro Mode Normal Macro Auto macro X X X O X X X

O X X SCENE X X

1. The image to be captured.
2. Press the SHUTTER button halfway and focus on the subject.
3. Recompose the picture and fully press the SHUTTER button.

Flash (

) / Left button
If you press the shutter button after selecting the Auto, Fill-in, Slow sychro flash, the first flash fires to check the shooting condition (Flash range and Power ratio of flash). Do not move until the second flash fires. Using the flash frequently will reduce the life of the battery. Under normal operating conditions the charging time for the flash is normally within 5 seconds. If the battery is weak, the charging time will be longer. During the continuous shot, AEB and movie clip mode, the flash function will not operate. Take photographs within the flash range. The image quality is not guaranteed if the subject is too close or highly reflective. When taking an image in a poorly lit condtion with the flash, there may be a white speck in the captured image. The speck is caused by the reflecting of the flash light from the floating matters. It is not camera malfuction.
When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH ( ) button.
[Selecting the Auto flash]
Selecting the flash mode 1. Rotate the MODE DIAL to select a RECORDING mode with the exception of MOVIE CLIP mode. 2. Press the Flash button until the desired flash mode indicator displays on the LCD monitor. 3. A flash mode indicator will be displayed on the LCD monitor. Use the correct flash to suit the environment. Flash range ISO AUTO Normal WIDE 0.8 ~ 4.8 TELE 0.8 ~ 4.3 Macro WIDE 0.4 ~ 0.8 TELE 0.5 ~ 0.8 WIDE 0.4 ~ 4.8 (Unit : m) Auto macro TELE 0.5 ~ 4.3

ROTATE

180 Horizontal Vertical Standard
Index Size No Yes Full Basic OSD Off
COPY TO CARD OSD INFORMATION

p.50 Size p.51

4X6 L 2L Letter A4 CUSTOM SET A3 Auto Full Layout Index p.53

Starting the slide show

Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [SLIDE] menu tab. Start the slide show : The slide show can start only in the [Show] menu. 1. Use the Up / Down buttons to select the [Show] SLIDE menu and press the Right button. Show Play Interval Repeat Play 2. Select a desired sub menu by pressing the Effect Up / Down button. [Play] : The slide show is closed after one Back: Set:OK cycle. [Repeat Play] : The slide show is repeated until cancelled. 3. Press the OK button and the slideshow will be started. Setting play interval: Set the slide show play interval. 1. Select the [Interval] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down buttons to select the desired interval. 3. Press the OK button to save the configuration.

Sub menu

Secondary menu Auto Plain Photo Fastphoto Auto Draft Normal Fine Auto

CUSTOM SET

Quality

Off On Auto

File name Standard Index No Yes No Yes

Off On -

Show Interval Effect
1 sec 3 sec 5 sec 10 sec Set:OK

PRINT DPOF PRINT RESET

p.53 p.54 p.54
The loading time depends on the image size and quality. While the slide show is playing, only the first frame of a MOVIE file is displayed. While the slide show is playing, the voice recording file will not display.

Protecting images

This is used to protect specific shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock). Protecting Images 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [PROTECT] menu tab. 3. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. [Select ] : Selection window for an image to be protected/released is displayed. - Up / Down / Left / Right : Select an image - Zoom W / T Button : Protect / release the image - OK button : Your changes will be saved and the menu will disappear. [All Pics] : Protect / release all saved images - Zoom W / T Button : Protect / release the images - OK button : Your changes will be saved and the menu will disappear.
Configure slide show effects : Unique screen effects can be used for the slide show. 1. Select the [Effect] sub menu by pressing the SLIDE UP / DOWN button and press the RIGHT button. OFF Show 2. Use the Up / Down button to select the type of Interval Effect effect. : Normal display. Back: Set:OK : Image is displayed slowly. : Image is displayed slowly from the centre outwards. : Image moves from the top left. : The image slides diagonally from top left to bottom right. : The image slides irregularly. 3. Press the OK button to confirm the setting.

Standard Index Size Select All Pics Cancel

00 Prints Set:OK

00 Prints

DPOF : Print size

Copy To Card
This enables you to copy image files, movie clips and voice recording files to the memory card. Copying to the Memory Card 1. Press the play mode button and press the menu button. COPY TO CARD 2. Select the [COPY TO CARD] menu tab by No pressing the LEFT / RIGHT button. Yes 3. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. Exit:MENU Move: - [No] : Cancels "Copy to Card". - [Yes] : All images, movie clips and voice recording files saved in the internal memory are copied to the memory card after the [Processing!] message is displayed. After copying has been completed, the screen will return to play mode.
You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. Setting the Print Size 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [DPOF] menu tab. 3. Select the [Size] menu by pressing the UP / DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. [Select] : Selection window for an image to be changed printed size is displayed. - Up / Down / Left / Right : Select an image. - Zoom W / T Button : Change the print size. - OK button : Your changes will be saved and the menu will disappear. [All Pics] : Change print size of all saved images. - W / T button : Select a print size - OK button : Confirm the changed setting. [Cancel] : Cancel all of the print size settings.

Cancel Set:OK

When this menu is selected without inserting a memory card, you can select the [COPY TO CARD] menu but the menu cant be run. If there is not enough space available in the memory card to copy saved images in the internal memory (45MB), the [COPY TO CARD] command will copy only some of the images and display [Memory Full!] message. Then the system will return to the playback mode. Please be sure to delete any unnecessary files to free up space before inserting the memory card into the camera. When you move the images that are stored in the internal memory by doing [COPY TO CARD] to the card, the next number of file names will be created in the card to avoid duplication of the file name. - When the [Reset] of the [File] setup menu is set : The copied file names start from after the last stored file name. - When the [Series] of the [File] setup menu is set : The copied file names start from after the last captured file name. After completing [COPY TO CARD], the last stored image of the last copied folder is displayed on the LCD monitor.

Cancel

DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10
Depending on the manufacturer and print model, canceling the printing may take a little longer for the printer to process.
On Screen Display information

PictBridge

You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. Setting up the camera for connection with the printer 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT / RIGHT button and select [SETUP] menu tab. 3. Select [USB] menu by pressing the UP / DOWN button and press the RIGHT button. 4. Select [Printer] menu by pressing the UP / DOWN button and press the OK button.
You can check shooting information about the displayed image. How to select the type of information you want to see 1. Press the play mode button and press the menu button. 2. Select the [OSD INFORMATION] menu tab by pressing the LEFT / RIGHT button. 3. Select a desired sub menu by pressing the UP / DOWN button and press the OK button.

OSD INFORMATION

Full Basic OSD Off
Format Date&Time Imprint Sound USB

Computer Printer

Connecting the Camera to a Printer Connect the camera to a printers USB port with the supplied USB cable.

[Basic] [OSD Off]

[Full]
PictBridge : Picture Selection
If you selected [Computer] in Step 4, when you connected the camera to your printer, the [Connecting Computer] message will display and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 2 and onward. Or, press the Printer button and the camera is connected to the printer displaying the [Connecting Printer] message. But, the camera may not connect to the printer, depending on the manufacturer and model of the printer. Easy printing When you connect the camera to printer in the Play back mode, you can print a picture easily. - Pressing the printer( ) button : Currently displayed image will be printed with the printers default setting. - Pressing the Left / Right button : Selects a previous / next image.
Setting the Number of Copies to Print - Select [One Pic] or [All Pics]. A screen where you can set the number of copies to print will appear as shown below.

PREV Exit:Shutter

NEXT Set:OK Exit:Shutter Set:OK
[When [One Pic] is selected]
[When [All Pics] is selected]

Print:

Menu:OK
Select pictures to print 1. Press the Menu button. 2. The [IMAGES] menu will appear. IMAGES One Pic 3. Use the UP and DOWN buttons to select the All Pics desired sub menu value, and then press the OK button. Exit:MENU Move: When [One Pic] is selected : The PictBridge function will be applied only to the picture currently displayed. When [All Pics] is selected : The PictBridge function will be applied to all pictures, excluding movie clips and voice files.

Some menu options are not supported in all manufacturer and printer models. If not supported, the menus are still displayed in the LCD, but are not selectable. If the setting values are not changed in the automatic / manual setting, the setting values are automatically kept.
PictBridge : DPOF Printing

Setup menu

In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by are default settings. Menu tab
DPOF Print : This allows you to directly print the files with DPOF information. 1. Use the LEFT and RIGHT buttons to select the [DPOF PRINT] menu tab. 2. Use the UP and DOWN buttons to select the desired sub menu value, and then press the OK button. [No] : Cancel the printing [Yes] : Directly print the file with the DPOF information

DPOF PRINT

Main menu File

Power Off

Sub menu Series Reset Off, 1, 3, 5, 10 min

ENGLISH DEUTSCH

Secondary menu FRANAIS ITALIANO DUTCH SUOMI Magyar -

Page p.55 p.56

Depending on the manufacturer and printer model, some menus may not be available. When a printer does not support DPOF, the menu is still displayed but not available.
ESPAOL PORTUGUS SVENSKA BAHASA POLSKI -

Language

PictBridge : Reset
Initialises user-changed configurations. 1. Use the LEFT and RIGHT buttons to select the [RESET] menu tab. 2. Use the UP and DOWN buttons to select the desired sub menu value, and then press the OK button. If [No] is selected : Settings will not be reset. If [Yes] is selected : All print and image settings will be reset.

Format

Date&Time

Imprint

Default print setting varies depending on the printer manufacturer. For your printers default setting, refer to the users guide that came with your printer.
No Yes 07/03/01 13:00 yy/mm/dd Off dd/mm/yy mm/dd/yy Off Date Date&Time Off Low Medium High
Sub menu Computer Printer Off On Dark Normal Bright NTSC PAL Off / 0.5, 1, 3 sec No Yes

Secondary menu -

[ File name ]
This function allows the user to select the file naming format. Assigning File Names 1. In any mode with the exception of Voice Recording SETUP mode, press the MENU button. Series File 2. Press the LEFT / RIGHT button and select the Reset Power Off Language [SETUP] menu tab. Format Date&Time 3. Select the [File ] menu by pressing the UP / DOWN Back: Set:OK button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. [Series] : New files are named using numbers that follow the previous sequence, even when a new memory card is used, or after formatting, or after deleting all pictures. [Reset] : After using the reset function, the next file name will be set from 0001 even after formatting, deleting all or inserting a new memory card. 5. Press the menu button twice and the menu will disappear. - The first stored folder name is 100SSCAM, and the first file name is SS100001. - File names are assigned sequentially from SS100001 SS100002 ~ SS109999. - The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM 101SSCAM ~ 999SSCAM. - The files used with the memory card conform to the DCF(Design rule for Camera File systems) format. Do not change the image file name voluntarily. The image cannot be displayed on the camera.

USB AF Lamp

p.58 p.58

Video Out

Quick View

p.59 p.59 p.60 p.60

Reset Battery type

Alkaline

[ Auto power off ]
This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. Sub menus [Off]

[ Language ]

There is a choice of languages that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will be preserved. - LANGUAGE sub menu : English, Korean, French, German, Spanish, Italian, S.Chinese, T.Chinese, Japanese, Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai, BAHASA(MALAY / INDONESIAN), Arabic, Czech, Polish, Hungarian and Turkish.
File Power Off Language Format Date&Time
: The power off function will not operate. [1, 3, 5, 10 min] : The power will turn off automatically if not used for the period of time specified.
Off 1 min 3 min 5 min 10 min
ENGLISH FRANAIS DEUTSCH ESPAOL
- After replacing the battery, the power off setting will be preserved. - Note that the automatic power off function will not operate if the camera is in PC mode, slide show, playing back a voice recording, playing back a movie clip and taking a composite shot.

[ Formatting a memory ]

This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. Sub menus [No] : The memory will not be formatted. Press the menu button three times and the menu display will disappear. [Yes] : A [Processing!] message appears and the memory will be formatted. If you run FORMAT in Play mode, a [No Image!] message will appear.
[ Setting up the Date / Time / Date type ]
You can change the date and time that will be displayed on the captured images and set up the date type. Setting Date / Time & Selecting Date Format RIGHT button : Selects the year/ month/ day/ hour/ SETUP minute date type. File 07/03/01 LEFT button : Moves the cursor to the Power Off Language 13:00 [Date&Time] main menu if the Format yy/mm/dd Date&Time cursor is at the first item of the date Back: Set:OK and time setup. In all other cases, the cursor will be shifted to the left of its current position. UP and DOWN buttons : Changes the setting value - Date type : [yy/mm/dd], [Off], [dd/mm/yy], [mm/dd/yy]
File Power Off Language Format Date&Time Back: No Yes
Be sure to run [Format] on the following types of memory card. - A new memory card, or an unformatted memory card - A memory card that has a file this camera can't recognise or one that has been taken from another camera. - Always format the memory card using this camera. If you insert a memory card that has been formatted using other cameras, memory card readers, or PCs, you will get a [Card Error!] message.

Alkaline Ni-MH

Start Image Start Sound Shutter Sound

Start up sound

Important notes
Be sure to observe the following precautions! This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials. Do not leave this camera in places subject to dust, chemicals (like naphthalene and mothball), high temperature and high humidity. Keep this camera with silica gel in a hermetically sealed box when not planning to use the camera for a long period of time
You can select the sound that is activated whenever the camera is turned on. Start up sound : [Off], [Sound 1], [Sound 2], [Sound 3] - If the start up image is set to [Off], the start up sound will not activate, even though you may have set these to on.
Start Image Start Sound Shutter Sound Off Sound 1 Sound 2 Sound 3

Shutter sound

You can select the shutter sound. Shutter sound : [Off], [Sound 1], [Sound 2], [Sound 3]
Off Sound 1 Sound 2 Sound 3 Set:OK
Sand can be particularly troublesome to cameras. - Do not let sand get inside the camera when using it on beaches, coastal dunes, or other areas where there is lots of sand. - Doing so may result in failure or may permanently render the camera unusable. Handling the camera - Never drop the camera or subject it to severe shocks or vibrations. - Protect the large size LCD monitor from an impact. When this camera is not used, keep it in the camera case. - Avoid obstructing the lens or the flash when you capture an image. - This camera is not waterproof. To avoid dangerous electrical shocks, never hold or operate the camera with wet hands. - If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit.
Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture built up can also occur in the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed. Caution on Using the Lens - If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of the image sensor. - Pay attention not to get fingerprints or foreign substances on the surface of the lens. If the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to remove the battery and the memory card if you do not intend using the camera for an extended period of time. If the camera is exposed to an electronic interference, it will turn itself off to protect the memory card.

3. The [Unplug or Eject Hardware] window will open. Select the [USB Mass Storage Device] and click the [Stop] button.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory will be displayed. 2. Select an image file and copy or move it to MAC. 4. The [Stop a Hardware device] window will open. Select the [USB Mass Storage Device] and click the [OK] button.
For Mac OS 10.0 or later : First complete uploading from computer to camera and then remove the removable disk with the Extract command. If a movie clip cant play back on the Mac OS, please visit the following site(http://www.divx.com/divx/mac/) and download the codec. Or, use a media player that supports the Xvid codec (Mplayer, VLC(VideoLAN Client) media player).
5. A [Safe to Remove Hardware] window will open. Click the [OK] button.
Removing the USB Driver for Windows 98SE

Digimax Master

You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. To start the program, click [Start Programs Samsung Digimax Master Digimax Master].
To remove the USB driver, refer to the process shown below. 1. Connect the camera to your PC and turn them on. 2. Check whether the Removable Disk is on the [My Computer]. 3. Remove the [Samsung Digital Camera] on the Device manager.
Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will display after connecting the camera to your PC. - To download the captured images, select the [Select All] button. - Select desired folder in the window and click the [Select All] button. You can save captured images and selected folder. - If you click the [Cancel] button, downloading will be cancelled.
4. Disconnect the USB cable. 5. Remove the [Samsung USB Driver] on the Add/Remove Programs Properties.
3. Click [Next >] button.
6. Uninstallation is complete.
4. Select a destination and make a folder to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded. - Folder name will be made as you want and images will be downloaded. - After selecting a folder that was made before, images will be downloaded. 5. Click [Next >] button.
Image viewer : You can view the stored images.
6. A window will open as shown alongside. The destination of the selected folder will be displayed on the upper side of the window. Click the [Start] button to download the images.

Case 7

In some security programs (Norton Anti Virus, V3, etc.), the computer may not recognise the camera as a removable disk. Stop the security programs and connect the camera to the computer. Refer to the security program instructions about how to temporarily disable the program.

Case 8

The camera is connected to the USB port located on the front of the computer. When the camera is connected to the USB port located on the front of the computer, the computer may not recognise the camera. Connect the camera to the USB port located on the back of the computer.
When the movie clip doesnt play back on the PC When the movie clip recorded by the camera doesnt play back on the PC, the causes are mostly due to the codec installed on the PC.
Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
When the DirectX 9.0 or later is not installed Install the DirectX 9.0 or later 1) Insert the CD provided with the camera 2) Run the windows explorer and select the [CD-ROM drive:\ USB Driver\DirectX 9.0] folder and click the DXSETUP.exe file. The DirectX will be installed. Visit the following site for downloading the DirectX.http://www.microsoft.com/directx If a PC (Windows 98SE) stops responding while the camera and PC are connected repeatedly If a PC (Windows 98SE) is turned on for a long time and the camera is connected repeatedly, the PC may not recognise the camera. In this case, restart the PC. If a PC connected with the camera stops responding while Windows is starting. In this case, disconnect the PC and the camera and Windows will start. If the problem happens continuously, set the Legacy USB Support to disable and re-start the PC. The Legacy USB Support is in the BIOS setup menu. (The BIOS setup menu differs from the PC manufacturers and some BIOS menus dont have Legacy USB Support) If you cant change the menu by yourself, contact to the PC manufacturer or BIOS manufacturer. If the movie clip cant be deleted, removable disk cant be extracted or an error message displays during the file transfer. If you install only the Digimax Master, the problems mentioned above occasionally happen. - Close the Digimax Master program by clicking the Digimax Master icon on the Taskbar. - Install all the application programs included in the software CD. (You must install the Movie clip codec)

FCC notice

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION : Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment.
Declaration of Conformity Trade Name : SAMSUNG TECHWIN Model No. : Samsung D1030 Responsible Party : Samsung Opto-Electronics America, INC. Address : 40 Seaview Dr. Secaucus,NJ 07094 Telephone No. : 201-902-0347 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086, 8088, 8090, 8092, 8099 FAX : (82) 31-740-8398 www.samsungcamera.com SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : (1) 201-902-0347 FAX : (1) 201-902-9342 WESTERN REGIONAL OFFICE 18600 BROADWICK ST., RANCHO DOMINGUEZ, CA 90220, U.S.A. TEL : (1) 310-900-5284/5285 FAX : (1) 310-537-1566 www.samsungcamerausa.com

SAMSUNG FRANCE S.A.S. BP 51 TOUR MAINE MONTPARNASSE 33, AV.DU MAINE 75755, PARIS CEDEX 15, FRANCE HOTLINE PHOTO NUMRIQUE : 37 27(Numro Vert-Appel Gratuit) TEL : (33) 1-4279-2200 FAX : (33) 1-4320-4510 www.samsungphoto.fr SAMSUNG OPTO-ELECTRONICS GMBH AM KRONBERGER HANG 6 D-65824 SCHWALBACH/TS., GERMANY TEL : 49 (0) FAX : 49 (0) www.samsungcamera.de TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD No.9 zhangheng Street. Micro-Electronic Industrial Park Jingang Road Tianjin China. POST CODE : 300385 TEL : (86) 22-2761-4599 FAX : (86) 22-2769-7558 www.samsungcamera.com.cn
SAMSUNG OPTO-ELECTRONICS UK LIMITED SAMSUNG HOUSE 1000 HILLSWOOD DRIVE HILLSWOOD BUSINESS PARK CHERTSEY KT16 OPS U.K. TEL : (free for calls from UK only) UK Service Hotline : 01932455320 www.samsungcamera.co.uk RUSSIA INFORMATION CENTER SAMSUNG ELECTRONICS 117545 ST. DOROZHNAYA BUILDING 3, KORPUS 6, ENTRANCE 2, MOSCOW, RUSSIA TEL : (7) 495-363-1700 CALL FREE : (8) (from Russia only) www.samsungcamera.ru
Internet address - http : //www.samsungcamera.com The CE Mark is a Directive conformity mark of the European Community (EC)

6806-4656