2 - English

Page 3

Precaution

Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. if the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Exterior interference such as lightning and static electricity can affect normal operation of this recorder. If this occurs, turn the DVD Recorder & VCR off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The recorder will operate normally.
Be sure to remove the disc and turn off the recorder after
Disconnect the AC power cord from the AC outlet
when you dont intend to use the recorder for long periods of time. Clean the disc by wiping in a straight line from the inside to the outside of the disc.

Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC power cord from the AC outlet. Do not use benzene, thinner, or other solvents for cleaning. Wipe the cabinet with a soft cloth.

Disc Handling

Step 3 : Connecting the Audio Cable.21 Connecting to your TV.21
Connecting to a stereo amplifier with analog input jacks.22 Connecting to an AV amplifier with a digital input jack.23
Step 4 : Connecting External Devices.24
Connecting a VCR, Set-Top Box(STB) or DVD player to the AV 1 IN or S-VIDEO IN jacks.24 Connecting a Camcorder to the AV 2 IN jacks.25 Connecting a Camcorder to the DV IN jack.26 Step 5 : Connecting the Power Cord.27 Step 6 : Preparing the Remote Control.27 Setting the Remote Control.28

System Setup

On-Screen Menu Navigation.29 Auto Clock Set.30 Manual Clock Set.31 Channel Set.32 Auto Channel Memory.32 Channel Add/Delete.33 RF Output Channel.33 Setting Up the Language Options.34 Setting Up the Audio Options.35 Setting Up the Display(Video) Options.36 Setting Up the Parental Control.37 VCR Setting.38 Video Input.39 DVD EP Mode Time.40 Automatic Chapter Creator.40 Quick Recording.41
Connecting & Setting Up
Quick Overview.14 Step 1 : Connecting the Antenna Cable.15
Antenna + DVD Recorder & VCR + TV : No Cable box.15 Antenna + Cable box + DVD Recorder & VCR + TV : Cable box with many scrambled channels.16 Antenna + DVD Recorder & VCR + Cable box + TV : Cable box with a few scrambled channels.17

Playback

DVD Playback Before Playing.42 Playing a Disc.43 Using the Disc Menu and Title Menu.44 Using the Search & Skip Functions.44 Slow Motion Play / Step Motion Play.45
Step 2 : Connecting the Video Cable.18 Connecting to a Video input jack.18 Connecting to an S-video input jack.19 Connecting to Component video input jacks (Y,PB,PR).20

6 - English

Page 7
About ANYKEY.45 Repeat Playback.46 Selecting the Subtitle & Audio Language.47 Changing the Camera Angle.48 Zooming-In.48 Using the Bookmarks.49 Using the Markers.50 Playing back an Audio CD (CD-DA).51 Playing back an MP3 Disc.52 Repeat Playback of an Audio/MP3 Disc.53 Play Option Mode.53 To Program Tracks.54 Playing a Picture Disc.54 VCR Playback Playing the VCR.55 Tracking.55 Special VCR Playback Features.56 S-VHS Playback.56 Variable Search System.56

Editing

Playing the Title List.69 Basic Editing (Title List).71 Renaming(Labeling) a Title.71 Locking(Protecting) a Title.72 Deleting a Title.73 Deleting a Section of a Title.73 Editing a Chapter.75 Dividing a Title.77 Advanced Editing (Playlist).78 Creating a Playlist.78 Playing Titles in the Playlist.79 Renaming a Playlist Title.79 Editing a Scene for the Playlist.80 Copying a Playlist Title to the VCR.83 Deleting a Playlist Title from the Playlist.84 Disc Manager.84 Editing the Disc Name.84 Disc Protection.85 Formatting a Disc.86 Finalizing a disc.86 Unfinalizing a disc (V/VR mode).87 Delete All Title Lists.88 Edit Compatible.89

2:1 PM

Page 13

Tour of the Remote Control
1. DVD Button Press this when you use a DVD. 2. TV Button Press this to operate TV. 3. POWER Button 4. NUMBER Button 5. 100+ Button Press this to select channel 100 or higher. 6. F.ADV/SKIP Button 7. Playback-related Buttons Forward/Rewind, Search, Skip, Stop, Play/Pause 8. VOL (Volume) Button TV volume adjustment 9. MENU Button Press this to bring up the DVD Recorder & VCRs setup menu. 10. ENTER/DIRECTION Buttons (UP/DOWN or LEFT/RIGHT Buttons) This button functions as a toggle switch. 11. INFO Button Press this to display current setting or disc status. 12. TITLE LIST/DISC MENU Button Press this to enter the TITLE LIST/Disc menu.
13. SUBTITLE Button Press this to switch the DVDs subtitle language. 14. ANYKEY Button Press this to set the status of the disc that is being played. 15. REC Button Press this to make a recording on VCR, DVD-RAM/ RW/R discs. 16. TO DVD COPY Button Press this when you copy from the VCR to the DVD. 17. REC SPEED Button Press this to set the desired recording time and picture quality. 18. VCR Button Press this when you use a VCR. 19. INPUT SEL. Button Press this to select AV input signal in external input mode. (Tuner, AV input, DV input) 20. OPEN/CLOSE Button Press this to open and close the disc tray. 21. TV POWER Button 22. TV/VCR Button 23. MARKER Button Press this to bookmark or mark a position while playing a disc. 24. CH/TRK Button Press this to select a TV channel/Adjust tape tracking. 25. RETURN Button Returns to a previous menu. 26. AUDIO/TV MUTE Button Press this to access various audio functions. This operates as sound mute. (TV mode) 27. CANCEL Button 28. PLAY LIST/TITLE MENU Button Press this to enter the Edit playlist/Title menu. 29. ANGLE Button Press this to access various camera angles on a disc (if the disc contains multiple camera angles). 30. ZOOM Button Zooms in on screen. 31. TIMER REC Button Press this when you use Timer Recording. 32. TO VCR COPY Button Press this when you copy from the DVD to the VCR. 33. REC PAUSE Button Press this to pause during recording.

Key Lock Function

If you do not want others to operate the DVD Recorder & VCR (for example if you have programmed a timer recording) you can set the equipment to lock out all button controls. Press and hold the INFO button on the remote control for 5 seconds. The display will show SAFE when the feature is activated. To resume normal mode, press and hold the INFO button again for 5 seconds. SAFE will disappear and the DVD Recorder & VCR will operate normally.

This is a special remote control for the visually impaired, and has Braille points on the POWER( ), STOP( ) and PLAY( ) buttons.

English - 13

Page 14

Connections

Quick Overview
A Quick overview presented in this guide will give you enough information to start using the recorder.
Step 1 : Connecting the Antenna Cable
Step 2 : Connecting the Video Cable
Step 3 : Connecting the Audio Cable
Step 4 : Connecting External Devices
Step 5 : Connecting the Power Cord
Step 6 : Preparing the Remote Control
Quick Overview.14 Step 1: Connecting the Antenna Cable.15 Step 2 : Connecting the Video Cable.18 Step 3 : Connecting the Audio Cable.21 Step 4 : Connecting External Devices.24 Step 5 : Connecting the Power Cord.27 Step 6 : Preparing the Remote Control.27
Note to CATV system installer : This reminder is to call CATV system installers attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable title as practical.

14 - English

Page 15
Step 1: Connecting the Antenna Cable
There are several ways to connect your DVD Recorder & VCR. Select the antenna connection that best suits you below.
Antenna + DVD Recorder & VCR + TV : No Cable box
You can record non-scrambled channels by selecting the channel on the DVD Recorder & VCR. Also use this method if you watch channels without cable box.
If you are using an off-air antenna that has 300ohm twin flat leads, use an external antenna connector (300-75 ohm adaptor : not supplied) to connect the antenna to the DVD Recorder & VCR.
If you have two separate antennas (one VHF and the other UHF), use a UHF/VHF combineradaptor (available at most electronics shops) to connect the antenna to the DVD Recorder & VCR.

English - 15

Page 16
Antenna + Cable box + DVD Recorder & VCR + TV : Cable box with many scrambled channels
You can record channels by selecting the channel on the cable box. You cannot record one channel while watching another channel. Be sure that the cable box is turned on.

16 - English

Page 17
Antenna + DVD Recorder & VCR + Cable box + TV : Cable box with a few scrambled channels

DVD-Recorder

No Disc Timer Rec. Setup Timer Record Scheduled Record List

Timer Record

RETURN
On-Screen Menu Navigation...29 Auto Clock Set...30 Manual Clock Set..31 Channel Set...32 Auto Channel Memory..32 Channel Add/Delete...33 RF Output Channel..33 Setting Up the Language Options..34 Setting Up the Audio Options..35 Setting Up the Display (Video) Options..36 Setting Up the Parental Control..37 VCR Setting...38 Video Input...39 DVD EP Mode Time..40 Automatic Chapter Creator..40 Quick Recording...41

MENU Button

Press this button on the remote control to open the on-screen MENU. Press again to exit the on-screen MENU.

/, / Buttons

Press these buttons on the remote control to move the selection bar /, / to cycle through the menu options.

ENTER Button

Press this button on the remote control to confirm any new settings.

RETURN Button

Press this button on the remote control to return to the previous MENU screen displayed or to exit the on-screen MENU.

English - 29

Page 30

Auto Clock Set

This menu is used to set the current time. You need to set the time to use timer recording. You must have the antenna connected to set the Auto Clock. See pages 15~17 for Antenna Connections. The Clock will be automatically set when you turn off the recorder.
Press the buttons to select Auto Clock Set, then press the ENTER or button.
No Disc Timer Rec. Setup Clock Data CH Time Zone Daylight Saving : Automatic : Automatic : Automatic
I If your clock is set to the wrong time zone or Note
daylight saving, you can adjust these settings without turning off the Auto Clock Set function.
With the unit in Stop mode/No Disc mode, press the MENU button.
Press the buttons to select the sub menu (Clock Data CH, Time Zone or Daylight Saving), then press the ENTER or button.

Clock Data CH

MOVE ENTER RETURN EXIT
Press the buttons to select a channel that carries a time signal, then press the ENTER button. Select Auto to set the channel automatically.
No Disc Timer Rec. Clock Data CH
Press the buttons to select Setup, then press the ENTER or button.
No Disc Timer Rec. Setup System Clock Set Channel Set Language Audio Video Parental Control MOVE ENTER RETURN EXIT

Select channel :

Time Zone
Press the buttons to select the time zone of your area, then press the ENTER or button. Select Automatic to set the time zone automatically.

Press the STOP button to stop playback.

Playing a Disc

When you stop playing the disc, the DVD Recorder & VCR remembers where you stopped. When you press PLAY button again, it will pick up where you left off. (unless the disc is removed or the DVD Recorder & VCR is unplugged, or if you press the STOP button twice.) This function is only applicable to DVD-VIDEO, DVD-RAM, DVDRW, DVDR or Audio CDs (CD-DA).
Do not move your DVD Recorder & VCR while playing, as this may cause damage to the disc. Make sure to press the OPEN/CLOSE button to open or close the disc tray. Do not push the disc tray while it is being opened or closed, as this may cause a product malfunction. Do not place foreign materials on or in the disc tray. Some functions may perform differently or be disabled depending on the disc type. If this occurs, refer to the instructions written on the disc case. Be especially careful that children's fingers are not caught between the disc tray and the tray chassis when it closes. After turning power on, it will take a few seconds until the DVD Recorder & VCR operates.

English - 43

Page 44
Using the Disc Menu and Title Menu
Some discs contain a dedicated menu system that allows you to select special functions for title, chapters, audio track, subtitles, film previews, information on characters, etc.
Using the Search & Skip Functions
Searching through a Chapter or Track

For DVD-VIDEO disc

Press the DISC MENU button to enter the disc menu of the disc. Move to the setup menu related to playback operation. You can select audio language and subtitle etc., provided by the disc.
During the playback, press the SEARCH or button on the remote control. Each time you press the SEARCH button, the playback speed will change as follows.
Fast 1/ Fast 1 Fast 2/ Fast 2 DVD-VIDEO/ DVD-RAM/DVDRW Fast 3/ Fast 3 Fast 4/ Fast 4 DVDR Fast 5/ Fast 5 Fast 6/ Fast 6

AUDIO CD(CD-DA)

X2 X4 X8
Press the TITLE MENU button to move to the title menu of the disc. Use this button if the disc contains more than one title. Some discs may not support the title menu functionality.
You can scan the program in reverse order. To return to normal speed playback, press the ll button. No sound is heard during Scan(Search) mode, except on CDs (CD-DA). (You can hear the sound during forward search (Fast 1) in disc.) Depending on the disc type, the sound quality may lower during Fast 1 mode.

Press the SUBTITLE button during playback.

Subtitle ENG

Press the buttons to select the desired subtitle language. To make the screen disappear, then press the CANCEL or RETURN button.
Press the AUDIO or buttons to select the desired audio language.

Using the ANYKEY button

Press the buttons to select Audio, then press the buttons to select the desired audio language.
Press the buttons to select Subtitle, then press the buttons to select the desired subtitle language.
Audio languages may be different because they are disc-specific. Some discs allow you to select the audio language for the disc menu only.
The subtitle display may be different depending on the disc type. If the subtitles overlap, disable the caption function on your TV. Some discs allow you to select the language for the disc menu only.

English - 47

00995A-VR330_XAA-Eng2

3:14 PM

Page 48
Changing the Camera Angle
If a DVD-VIDEO contains multiple angles of a particular scene, you can use the Angle function. If the disc contains multiple angles, ANGLE appears on the screen.

Zooming-In

Using the ANGLE button
Title Chapter Time Subtitle
Press the ANGLE button, during playback.

Audio Repeat Angle Zoom

MOVE Angle 1/3
Press the button to select the desired angle.
Press the buttons to select Zoom, then press the ENTER button. ( ) will be displayed.
Press the buttons to select Angle, then press the buttons or number (0~9) buttons to select the desired angle scene.
Press , buttons to move to the area you want to enlarge.
Press the ENTER button. Each time the ENTER button is pressed, the picture is enlarged up to 4X (four times the normal size). normal size 2X 4X 2X normal size
DVD-VIDEO/ DVD-RAM/DVDRW/ DVDR
This function is disc-dependent, and may not work all DVDs. This function does not work when a DVD has not been recorded with a multi-camera angle system.
You can also select Zoom function directly using ZOOM button on the remote control.

48 - English

Page 49

Using the Bookmarks

Playing back a Bookmark

Press the MARKER button.

Press the buttons to select a bookmarked scene.

Bookmark

- - - - - - - --
Set marks at scenes you want to see again so that you can start playback from the marked position.
Press the MARKER button during playback.

Recording the Current Channel you are watching
1. Check to make sure the antenna cable is connected. 2. Check the remaining time on the disc. DVD-RAM/DVDRW/+R discs should be formatted or initialized in advance before beginning recording. (See page 59.)
Recording will stop automatically if there is no free space left for recording. Up to 99 titles can be recorded onto a DVDRAM/-RW/-R disc, and up to 48 titles onto a DVD+RW/+R disc. If the power is interrupted due to power failure or other reasons, the title being recorded will not be saved onto the disc. Recording will stop automatically if a copy protected image is selected. Do not use DVD-R authoring discs with this unit.
Press the OPEN/CLOSE button and place a recordable disc on the disc tray. Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display.

60 - English

Page 61
Recording from External Devices
Follow these directions to record onto a disc or a tape from External Devices such as a Camcorder.
Recording through the DV Input jack
You may control your Camcorder using the IEEE1394 (DV) interface. Follow these directions to record onto a disc or tape from a camcorder that has a DV output jack.
Connect the AV out jack of your External Device to the AV IN jack on the front or rear of your DVD Recorder & VCR using the Audio/Video Cable. Power on your DVD Recorder & VCR and switch to AV In mode by pressing the INPUT SEL. button on the remote control. The front panel display changes in the following sequence depending on the Video input setting in the menu. AV1: Channel Number AV 1 AV 2 DV S-Video: Channel Number SUPER AV 2 DV
Connect the DV output jack of your camcorder to the DV input jack on the front of your DVD Recorder & VCR using a DV cable. Power on your DVD Recorder & VCR and switch to DV mode by pressing the INPUT SEL. on the remote control. Press the REC SPEED button repeatedly to select the recording speed(quality). SP LP EP XP If the input is set to DV, a playback/record menu that enables camcorder control appears on the top of the screen.
Press the REC SPEED button repeatedly to select the recording speed(quality). SP LP EP XP
When your DVD Recorder & VCR is in the Stop mode, start playback on your external device.
Press the REC button on your DVD Recorder & VCR to start recording when the desired video is displayed from the external device. Press the STOP button on your DVD Recorder & VCR when the recording is finished.
The DV device is connected. MOVE SELECT RETURN
Select the Play icon on the upper part of the screen to playback the camcorder and find the starting position to copy. To start recording, Press the button to select rec(G) icon in the top side of the screen, then press the ENTER button. You can press the REC button on the remote control to start recording. To display playback related icons on the screen, press either direction button on the remote control. Press the STOP button on your DVD Recorder & VCR when the recording is finished. Some camcorders may not work with your DVD Recorder & VCR even if they have a DV output jack. Also refer to the user manual for your camcorder when recording through the DV jack.

Basic VCR Recording
Before starting 1. Check TV channel and Antenna connections. 2. Check the remaining time on the tape. You can record a TV show in progress by inserting a blank tape and pressing the (REC) button. You can even add time in preset increments up to 4 hours by pressing the (REC) button repeatedly. Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small piece of tape. Warning: Do not cover this opening unless you are sure you want to record over the tape.
Press the button to select the number of the scheduled record list you want to delete, and then press the ENTER button. The Edit and Delete items are displayed.
01/01 03:05AM 05:05AM SP Edit 01/02 01:06AM 03:06AM SP Delete / : :
Insert a blank VHS tape into the VCR deck. Make sure the tape is long enough to record the entire program. Press the Number buttons or the CH/TRK ( / ) buttons to select the desired channel. Press the INPUT SEL. button to select AV 1, AV 2 or DV if recording from an external device connected to the input jacks of the recorder.
Press the button to select Delete, then press the ENTER or button. You will be prompted with the delete confirm message such as Do you want to delete No.01?.
DVD-Recorder DVD-Recorder
DVD-RAM(VR) DVD-RAM(VR) No. No.
Scheduled Record List Current Time 12:27 AM Current Time 12:27 AM Date Start Date Start No. 01 End Mode Edit End Mode Edit

DVD DVD DVD DVD

Source Source
CH06 01/01 03:05AM 05:05AM SP CH06 01/01 03:05AM 05:05AM SP CH06 01/02 01:06AM 03:06AM SP CH06 01/01 01:06AM 03:06AM SP Do / to N0.01? you want :delete:: / :
Press the REC SPEED button on the remote control to set the Record Speed to one of the following options: SP Standard Play, for best picture quality. SLP Super Long Play, for maximum recording time (3 times SP).
The selected Record Speed will appear on the front panel and on-screen displays.
Press the buttons to select Yes, then press the ENTER button. The selected title will be deleted from the list.
Maximum Recording Time - SP vs. SLP
Tape Length T-120 SP (Standard Play) Approx. 2 hrs Approx. 2hrs 40 mins Approx. 3 hrs SLP (Super Long Play) Approx. 6 hrs Approx. 8 hrs Approx.9 hrs

T-160 T-180

You can not delete programs that are currently being recorded.
When you watch or record on the VCR during DVD Recording, some function buttons may not operate. The message This function is not available. will be displayed.

English - 65

12:16 PM

Page 66

Press the (REC) button on the remote control or front panel. For options while recording is in progress, see Special Recording Features. Press the STOP button to stop or finish a recording in progress.

DVD-RAM(VR) JAN/01/2006 No. Title 01 JAN/01/JAN/01/JAN/01/JAN/01/2006 12:00 00:00:11 12:30 00:00:09 Play 01:00 00:01:36 Rename 01:30 00:00:11 Delete Edit Protection ENTER RETURN EXIT Title List 3/4 Length Edit
! Playback screen for recorded titles. @ Information window for the selected title: Title name, recording date, lock status, recording mode # Recorded title No. $ Recorded title name % Recording Length (i.e., the playing time) ^ Edit menu Play: Plays the selected title. Rename: Changes the name of a selected title. Delete: Deletes the selected title from the list. Edit: Deletes a section of title. Protection: Locks or unlocks the selected title. & Button display This may depend on the disc type.
JAN/01/2006 01:00 AM CH1 JAN/01/2006 XP
Press the buttons to select Play to play the title list, then press the ENTER button. The selected title will be played back.

RAM VR

DVD-RW(V)/DVD+RW/R has limited editing function.

Free Space Function

This function is only available with DVD+RW discs. If existing titles are deleted, new free space will be created. When you operate free space function, on-air TV images will appear on the left side of the title list.
Press the STOP button to stop playing. To return the title list screen, press the TITLE LIST button. You can also play a recorded program by pressing the ANYKEY button.
Title Time Subtitle Audio Repeat Zoom
Press the TITLE LIST button. The Title List screen is displayed. Or use the MENU button. Press the MENU button. Press the buttons to select Title List, then press the ENTER or button twice.
DVD+RW JAN/01/2006 No. Title 12:00 12:30 01:00 01:30 Title List 1/4 Length Edit 00:00:11 00:00:09 00:01:36 00:00:11
3/4 00: 00: 07 Off ENG Off Off D 2CH

JAN/01/2006 12:00 AM CH1

01 JAN/01/JAN/01/JAN/01/JAN/01/2006
Press the buttons to select Title. Press the buttons to select to play the title list, then press the ENTER button.

JAN/01/2006 SP

70 - English

Page 71

Press the buttons to select a Title you want to delete, then press the ENTER or button.
DVD+RW JAN/01/2006 No. Title 01 JAN/01/JAN/01/JAN/01/JAN/01/2006 Title List 3/4 Length Edit Play 12:00 00:00:11 Rename 12:30 00:00:09 01:00 00:01:36 Delete 01:30 00:00:11 Protection Chapter Edit Divide Title
Basic Editing (Title List)
Renaming(Labeling) a Title
Follow these instructions to rename a title list name, i.e., to edit the title of a recorded program.
JAN/01/2006 01:00 AM CH1 JAN/01/2006 SP

Enter the desired characters using the buttons.
DVD-RAM(VR) Dolphin Rename
01 JAN/01/2006 12:00 00:00:JAN/01/2006 12:30 00:00:Dolphin 00:00:05
This function is the same as the Rename function in renaming the title list. (See page 71.) The maximum number of characters that can be entered is 31.
Press the buttons to select the title you want to edit from the Playlist, and then press the ENTER or button. The Edit Playlist menu is displayed: Play, Rename, Edit Scene, Copy, Delete
Press the buttons to select Save, then press the ENTER button. The changed title is displayed in the title field of the selected title.
01 JAN/01/2006 12:00 00:00:JAN/01/2006 12:30 00:00:25 Play 03 Dolphin 00:00:05 Rename
Dolphin 1 Scene JAN/01/2006 12:00 AM
Edit Scene Copy Delete ENTER RETURN EXIT
Press the buttons to select Edit Scene, then press the ENTER or button. The Edit Scene screen is displayed.
DVD-Recorder DVD-RAM(VR) Scene No. 2/7 Edit Scene Playlist No. Play Modify 01 00:00:00:00:00:00:07 Move Add 04 00:00:08 MOVE 05 00:00:10 ENTER 06 00:00:11 RETURN Delete EXIT 3

80 - English

3:9 PM

Page 81

Playing a Selected Scene

Edit Scene

Press the ENTER button at the start point of the scene.
DVD-RAM(VR) Scene No. 001 Start End Modify Scene
Press the buttons to select the scene you want to play, then press the ENTER button. The playlist title to be played is selected.
DVD-Recorder DVD-RAM(VR) Scene No. 2 / 17
Title List : 1/31 Playlist No. Play Start Modify End Change ENTER 3

00:00:04

00:00:00 00:00:04 Cancel

01 00:00:05

02 00:00:06

03 00:00:07

Move Add

04 00:00:08 MOVE

05 00:00:10 ENTER

06 00:00:11 RETURN

Delete EXIT
Press the ENTER button. The selected scene will be played back.
The image and starting point time are displayed on the Start window. Select the starting or ending point of the section you want to modify using the playback related buttons (II,I ,I, ,).
Press the ENTER button at the end point of the scene.

00:00:10 00:00:10

To stop scene play, press the STOP button.

Change ENTER RETURN

Cancel EXIT
Modifying a Scene (Replacing a Scene)
To setup, follow steps 1 to 3 in page 80.
The image and ending point time are displayed in the End window.
Press the buttons to select the scene you want to modify, then press the ENTER button.
DVD-Recorder DVD-RAM(VR) Scene No. 2/7 Edit Scene Playlist No. Play Modify 01 00:00:00:00:00:00:04 Move Add 04 00:00:03 MOVE 05 00:00:11 ENTER 06 00:00:04 RETURN Delete EXIT 3

Before contacting a Samsung authorized service center, perform the following simple checks. Problem You cannot record a copy protected movie. You cannot record. This disc is protected. This disc cannot be formatted (the disc is protected). This disc cannot be renamed (the disc is protected). This disc cannot be finalized (the disc is protected). This [Menu] is not available (the disc is protected). The disc cannot be played, Please check the regional code of the disc. This disc cannot be formatted. Please check the disc. You could not format the disc because of error detection. You could not finalize the disc because of error detection. You could not unfinalize the disc because of error detection. The disc cannot be played, Please check the TV system. The disc can be neither played nor recorded. Make sure there are no scratches or dirt on the disc. The disc cannot be played, Please check the disc. The disc is PAL format and cannot be played on this unit. Make sure there are no scratches or dirt on the disc. The disc does not match the regional code for your area and cannot be played on this device. Disc you are using is protected. To record on this disc or use this function, cancel the disc protection function. Refer to page 85. Explanation / Solution You cant record the video since it is protected by copyright.
If the disc has invalid information, no more titles can be recorded. Please format the disc beforehand.
You cant use the disc because it contains errors from previous recordings. Use the disc after formatting.

94 - English

Page 95

Problem

Explanation / Solution You cant use the disc because it contains errors from previous recordings. Use the disc after formatting.
Error is detected on the disc.
System error is found. Please try it again after turning off the power.
When operating, errors happen. Turn off the device. (To turn off, press and hold the power button on the front of the device for 10 seconds.) After turning off, press the Open button and remove the disc from the device.
The DV device is not connected.
Make sure the DV device is connected properly to the DV connection Jack. If it is connected properly, turn it off and on once again.