Reviews & Opinions
Independent and trusted. Read before buy Samsung DVD-CM250!

Samsung DVD-CM250

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Samsung DVD-CM250 Dvd Player, size: 2.7 MB
Related manuals
Samsung DVD-CM250 Combo Theater Quick Guide

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Samsung DVD-CM250About Samsung DVD-CM250
Here you can find all about Samsung DVD-CM250 like manual and other informations. For example: review.

Samsung DVD-CM250 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Samsung DVD-CM250 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Samsung DVD-CM250 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 4. Page 1 of 1. Average Rating:
Tamblyne 7:19am on Wednesday, October 6th, 2010 
I originally planned on getting 2 of these and setting up RAID 0, but with some experimentation, found out that, from the way I use my hard drives.
chris319 5:31pm on Thursday, August 19th, 2010 
Great budget Hard drive I was looking to replace a 500 gig desktop hard drive when i spotted this listed on amazon. Is that a hornet in the room? I bought this drive because I wanted a fast data back-up facility. The drive is quiet most of the time.
AngryRedDragon 7:14am on Monday, August 9th, 2010 
Great piece of kit Works out of the box. Given our PC a new lease of life. Not more to say really! Samsung F3 HD103SJ Hard Drive Excellent performance at a good price. Very quiet drive, and much speedier than the original.
jdlittle58 2:46pm on Thursday, July 22nd, 2010 
This drive seems much louder than the last Samsung drive I had (500 GB). However.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

On-Screen Menu Navigation.29 Auto Clock Set.30 Manual Clock Set.31 Channel Set.32 Auto Channel Memory.32 Channel Add/Delete.33 RF Output Channel.33 Setting Up the Language Options.34 Setting Up the Audio Options.35 Setting Up the Display(Video) Options.36 Setting Up the Parental Control.37 VCR Setting.38 Video Input.39 DVD EP Mode Time.40 Automatic Chapter Creator.40 Quick Recording.41
Connecting & Setting Up
Quick Overview.14 Step 1 : Connecting the Antenna Cable.15
Antenna + DVD Recorder & VCR + TV : No Cable box.15 Antenna + Cable box + DVD Recorder & VCR + TV : Cable box with many scrambled channels.16 Antenna + DVD Recorder & VCR + Cable box + TV : Cable box with a few scrambled channels.17

Playback

DVD Playback Before Playing.42 Playing a Disc.43 Using the Disc Menu and Title Menu.44 Using the Search & Skip Functions.44 Slow Motion Play / Step Motion Play.45
Step 2 : Connecting the Video Cable.18 Connecting to a Video input jack.18 Connecting to an S-video input jack.19 Connecting to Component video input jacks (Y,PB,PR).20

6 - English

Page 7
About ANYKEY.45 Repeat Playback.46 Selecting the Subtitle & Audio Language.47 Changing the Camera Angle.48 Zooming-In.48 Using the Bookmarks.49 Using the Markers.50 Playing back an Audio CD (CD-DA).51 Playing back an MP3 Disc.52 Repeat Playback of an Audio/MP3 Disc.53 Play Option Mode.53 To Program Tracks.54 Playing a Picture Disc.54 VCR Playback Playing the VCR.55 Tracking.55 Special VCR Playback Features.56 S-VHS Playback.56 Variable Search System.56

Editing

Playing the Title List.69 Basic Editing (Title List).71 Renaming(Labeling) a Title.71 Locking(Protecting) a Title.72 Deleting a Title.73 Deleting a Section of a Title.73 Editing a Chapter.75 Dividing a Title.77 Advanced Editing (Playlist).78 Creating a Playlist.78 Playing Titles in the Playlist.79 Renaming a Playlist Title.79 Editing a Scene for the Playlist.80 Copying a Playlist Title to the VCR.83 Deleting a Playlist Title from the Playlist.84 Disc Manager.84 Editing the Disc Name.84 Disc Protection.85 Formatting a Disc.86 Finalizing a disc.86 Unfinalizing a disc (V/VR mode).87 Delete All Title Lists.88 Edit Compatible.89

Recording

DVD Recording Before Recording.58 Recordable discs.58 Recording Formats.59 Recording Mode.59 Unrecordable video.59 Recording the Current Channel you are watching.60 Recording from External Devices.61 Recording through a DV Input jack.61 Making a One Touch Recording(OTR).62 Making a Timer Recording.62 Editing the Scheduled Record List.64 Deleting the Scheduled Record List.64 VCR Recording Basic VCR Recording.65 Check Remaining Time.66 Special Recording Features.66 Copy to DVD or VCR.67

This connection will use your TVs speakers.

English - 21

Page 22
Connecting to a stereo amplifier with analog input jacks
If your stereo amplifier only has AUDIO INPUT jacks(L and R), use the AUDIO OUT jacks.

ANALOG AUDIO

Front(L)speaker

Front(R)speaker

22 - English

7:35 PM

Page 23
Connecting to an AV amplifier with a digital input jack
If your AV amplifier has a Dolby Digital or DTS decoder and a digital input jack, use this connection. To enjoy Dolby Digital or DTS sound, you will need to set up the audio settings. (See page 35)
Optical Cable (not supplied)
Coaxial Cable (not supplied)

AV amplifier

Digital Audio
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.

English - 23

Page 24
This allows you to connect your DVD Recorder & VCR to other external devices and view or record their outputs.
Connecting a VCR, Set-Top Box(STB) or DVD player to the AV 1 IN or S-VIDEO IN jacks
Connecting a VCR or external device to AV 1 IN jacks of the DVD Recorder & VCR. You can record from connected equipment (VCR, STB or DVD).

R S-VIDEO AUDIO

L VIDEO

OUTPUT or

You can also use the AV 2 IN jacks on the front panel of the DVD Recorder & VCR. I Press the INPUT SEL. button to select the AV1 or S-Video input. I Copy protected content cannot be recorded. I Depending on your input connection, you must choose AV 1 (Composite) or S-video. (See page 39)

24 - English

Page 25
Connecting a Camcorder to the AV 2 IN jacks
You can also use the AV 2 IN jacks on the front panel of the DVD Recorder & VCR. You can record from connected equipment, such as a camcorder. When an input source is inserted into AV 2 IN while viewing TV, the input will be switched to AV 2 IN automatically.

L VIDEO AUDIO

OUTPUT

Camcorder

If the AV 2 In input source is not selected automatically, press the INPUT SEL. button to select the AV 2 input.

English - 25

Page 26
Connecting a Camcorder to the DV IN jack

If your camcorder has a DV output jack, connect it to the DV input jack of your DVD Recorder & VCR.

DV Cable (not supplied)

DV OUT
If the input is not selected automatically, use INPUT SEL. button to select proper input.

26 - English

Page 27
After all connections are complete, plug the power cord in the wall outlet. Auto appears in the front panel display. This means that the current time is being set automatically through the antenna under connection(Auto Program). The setup may take several minutes. When the DVD Recorder & VCR operates normally, the current time is automatically set and displayed in the front panel display.
Install Batteries in the Remote Control
Open the battery cover on the back of the remote control. Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly. Replace the battery cover.
If the remote control does not operate properly:
Check the polarity + - of the batteries (Dry-Cell) Check if the batteries are drained. Check if the remote sensor is blocked by obstacles. Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local environmental regulations. Do not put them in the household trash.

English - 27

Page 28
Setting the Remote Control
You can control part of another manufacturers TV functions with this remote control. Buttons that can be controlled on your TV : TV POWER, INPUT SEL., VOL +/-, CH/TRK ( / ), TV MUTE, 0~9, 100+.
To determine whether your television is compatible, follow the instructions below.
1. Switch your television on. 2. Point the remote control towards the television. 3. Press and hold the TV button and enter the two-figure code simultaneously corresponding to the brand of your television by pressing the appropriate number buttons.
Brand SAMSUNG DAEWOO EMERSON GRADIENTE HITACHI JVC LG LOEWE MAGNAVOX Codes 01,14,15,23,06,08,04 Brand NEWSAN NOBLEX PANASONIC RCA SANYO SHARP SONY TELEFUNKEN TOSHIBA ZENITH Codes 12,24 07,29 05,20 02,16,17

Channel Add/Delete

Use this feature if Auto Channel Memory missed a channel that you would like to add or if you wish to remove a channel.
Press the buttons to select Add or Delete, then press the ENTER button.
No Disc Timer Rec. Setup Select channel : Channel is added.

Add Delete

RF Output Channel
When you connect the DVD Recorder & VCR to your TV with the RF Antenna Cable, follow the steps below to set the RF Output Channel.
Press the buttons to select Channel Set, then press the ENTER or button.

English - 33

Page 34
No Disc Timer Rec. Setup System Clock Set Channel Set Language Audio Video Parental Control
Press the buttons to select RF Output Channel, then press the ENTER or button.
No Disc Timer Rec. Setup Antenna/Cable TV Channel Add/Delete RF Output Channel : CH3 CH4 : Antenna
Press the buttons to select Language, then press the ENTER or button. Language setup menu will be displayed.
No Disc Timer Rec. Audio Subtitle Disc Menu : Original : Automatic : English

Language

On-Screen Menu : English MOVE ENTER RETURN EXIT
Press the buttons to select CH3 or CH4, then press the ENTER or button. The message "Please tune your TV to channel 3 (4)" will appear on the screen. Change your TV channel to CH3 or CH4 to match the RF Output Channel of the DVD Recorder & VCR.
Press the buttons to select the desired language option, press the ENTER or button.
No Disc Timer Rec. Setup Audio Subtitle : Original Original
: English Automatic Franais Disc Menu : English Deutsch On-Screen Menu : English Espaol Italiano Nederlands Korean
Setting Up the Language Options
If you set audio, subtitle, disc menu and on-screen menu language in advance, they will come up automatically every time you watch a movie. If the selected language is not recorded on the disc, the original pre-recorded language is selected.
Audio: For the disc audio language. Subtitle: For the disc subtitles. Disc Menu: For the disc menu contained on the disc. On-Screen Menu: For the on-screen menu of your DVD Recorder & VCR.
Press the buttons to select the desired language, then press the ENTER or button.

006 MOVE

SONG01 3.5MB 2006/01/01

MP3 Screen Elements

Music List 01/11 No. Title ROOT SONG01 SONG02 SONG03 SONG04 SONG05 SONG06 ENTER RETURN EXIT

@ $ &

SONG01
1. l button: Returns to the beginning of the current track when pressed during playback. If pressed again, your DVD Recorder & VCR moves to and plays the previous track. If you press this button within three seconds after playback starts, the previous track will be played. If you press this button after three seconds, the current track will be replayed from the beginning. 2. l button: Plays the next track. 3. I : Stops a track(song). 4. ll : Plays a track(song) or pauses playback. 5. RETURN button: Moves to the folder to which the current song belongs. 6. : Selects a track (song). 7. , ENTER button: Plays the selected track (song) or displays the files in the selected folder. 8. ANYKEY : To display the play mode window. (Repeat or Play Option).
1. Play mode icon. 2. Current track (song): Displays the name of the track being played. 3. Displays the current play index and total file number. 4. This shows the operating state of a disc and a playback time corresponding to a portion that is currently played. 5. Displays the mp3 file and folder list (song list). 6. Button display. 7. MP3 file information

52 - English

Page 53
Repeat Playback of an Audio/MP3 Disc

Play Option Mode

During playback, press the ANYKEY button. The Repeat mode will be highlighted.
TRACK 1 No. Title 001 TRACK 1 PLAY MODE 002 TRACK 2 Repeat : Off 003 TRACK 3 Play option : Normal TRACK 005 TRACK TRACK TRACK 7 MOVE ENTER Music List 01/15 Length 00:03:50 00:04:00 00:03:49 00:03:47 00:04:29 00:03:44 00:03:44 EXIT
During Stop, Press the ANYKEY button. The Play option will be highlighted.

0:00:01

Press the buttons to select the desired repeat mode you want to play repeatedly, then press the ENTER button.
TRACK 1 No. Title 001 TRACK 1 PLAY MODE 002 TRACK 2 Repeat : Off 003 TRACK TRACK 4 Music List 01/15 Length 00:03:50 00:04:00 00:03:49
Press the buttons to select a desired Play Option, then press the ENTER button.
TRACK 1 No. Title 001 TRACK 1 PLAY MODE 002 TRACK 2 Repeat : Off 003 TRACK 3 Play option : Normal TRACK 005 TRACK 5 Music List 01/15
Length 00:03:50 00:04:00 00:03:49 00:03:47 00:04:29
Repeat Track (CD (CD-DA)/MP3) Repeat Folder (MP3) Repeat Disc (CD (CD-DA)/MP3)
- To return to normal playback -
Normal: Tracks on a disc are played in the order in which they were recorded on the disc. Playlist: The Playlist playback option allows you to select the order in which you want tracks to play. Intro[ I ]: The first 10 seconds of each track will be played. If you want to listen to the music that you have selected, press the ENTER button or ll button. The play option will be changed to Normal Play. When Intro Play is completed, Normal Play is performed. Random[ R ]: The Random option plays a discs tracks in random order. After a random list is generated and played completely, another random list is generated and played. Random Play is continued until the play option is changed.

English - 53

6:18 PM

Page 54

To Program Tracks
You can register a maximum 30 tracks in the playlist.

Playing a Picture Disc

In still mode, press the ANYKEY button. The Play option will be highlighted. Press the buttons to select Playlist, then press the ENTER button. Playlist screen is displayed.
CDDA CDDA CDDA CDDA CDDA CDDA CDDA CDDA
Insert a JPEG into the disc tray.
JPEG Disc Navigation Timer Rec. Setup

Disc Navigation

Playlist 01/15
TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 TRACK 8
Press the buttons to select Disc Navigation, and then press the ENTER or button.
Press the buttons to select tracks in the order in which you want them to play, then press the ENTER button.
Press the buttons to select Photo, and then press the ENTER or button.

Playlist 04/15

TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 TRACK 004 TRACK 1 TRACK 2 TRACK 3 TRACK 4
Press the buttons to select a picture.

JPEG JPEG01

Photo List 01/10

JPEG01

JPEG02

JPEG03

JPEG04

JPEG05

JPEG06

JPEG07

If you selected a wrong track, press the button, then press the buttons to select the wrong track. Press the CANCEL button. The wrong track will be removed.

Slide Show

To see the next 8 pictures, press the l button. To see the previous 8 pictures, press the l button.

Playlist 03/03

TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 TRACK TRACK 1 TRACK 2 TRACK 3
Press the PLAY button to play the playlist.

54 - English

Page 55
If you press the ll button, the Slide Show Speed screen will appear. Press the buttons to set the slide show speed, then press the ENTER button.

DVD-RW(VR)

Playing the VCR
Slide Show Speed Slow Normal Fast
JPEG01 MOVE PHOTO ENTER RETURN
Insert a standard VHS tape into the VCR deck. When a tape is inserted, power will turn on automatically.

Turn the power off to finish the timer recording. will blink if disc or tape is not inserted.
The timer recording time may differ from the set time depending on disc status and overall timer recording status (for example, recording times overlapping, or when the previous recording ends within 3 minutes before the start time of the next recording.)

English - 63

Page 64
Editing the Scheduled Record List
Press the button to select Edit, then press the ENTER button. The Timer Recording screen is displayed. Edit the items you want to modify. See the Timer Recording section for more information on Timer Recording Input items. (See page 63)
Scheduled Record List Current Time 1:07 AM Date
Follow these directions to edit the timer record list.

Press the MENU button.

Press the button to select Timer Rec., then press the ENTER or button.
DVD-RAM(VR) Title List Playlist Disc Manager Timer Rec. Setup Copy MOVE ENTER RETURN EXIT Timer Record Scheduled Record List
Press the ENTER button to confirm the edited setting.
Press the MENU button after finishing the operation. The menu screen will disappear.
Press the button to select Scheduled Record List, then press the ENTER or button.
Deleting the Scheduled Record List
Scheduled Record List Current Time 12:27 AM Date Start End Mode Edit

DVD DVD

CH06 CH06
01/01 03:05AM 05:05AM SP 01/02 01:06AM 03:06AM SP / : :
Follow these directions to delete a title from the timer record list.
Press the button to select the number of the scheduled record list you want to edit, then press the ENTER or button. The Edit and Delete items are displayed.

DVD-RAM(VR)

SP Edit SP Delete
Title List Playlist Disc Manager Timer Rec. Setup Copy MOVE
Timer Record Scheduled Record List
01/01 03:05AM 05:05AM 01/02 01:06AM 03:06AM

/ : :

64 - English

Page 65

Basic VCR Recording
Before starting 1. Check TV channel and Antenna connections. 2. Check the remaining time on the tape. You can record a TV show in progress by inserting a blank tape and pressing the (REC) button. You can even add time in preset increments up to 4 hours by pressing the (REC) button repeatedly. Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small piece of tape. Warning: Do not cover this opening unless you are sure you want to record over the tape.

Check Remaining Time

To Add Recording Time
Refer to the One-Touch Recording (OTR). (See page 62)
Press INFO button on the remote control. Following information will be displayed. (Current deck status, recording speed, remaining time, input channel, current time.)
Recording on the DVD and VCR at the same time
You can record on the DVD and VCR at the same time, but both modes must be set up to record separately. Press the DVD/VCR button to set the unit to DVD or VCR mode. Choose AV input mode (CH, AV1, AV2 or DV). for DVD or VCR. Choose REC mode for DVD or VCR. Press REC button for DVD or VCR.
STOP 00:01:06 XP Rem 00:26 CH6
STOP 00:01:32 SP Rem 01:41 CH6

Sun Jan 01. 2006

01:08 AM
Special Recording Features
While a recording is in progress, you can watch a different media, or add recording time in preset increments. (for example, you can watch VCR playback while recording from a DVD and vice-versa)
When the DVD Recorder & VCR is connected to your TV using an S-Video or component video cable, the video tape's playback screen will not be displayed during DVD recording. You cannot record different channels at the same time. The DVD and VCR cannot start recording at the exact same time. You must set one mode to start recording, then the other.

66 - English

Page 67

Copy to DVD or VCR

To copy from "Edit Copylist", you need to make a copylist in advance. Select "New Copylist" and create the new playlist. (See pages 78) If you want to copy directly, choose "Direct Copy". On DVD-RW(V)/DVD+RW/R disc, you can only use Direct copy function.
You can copy from the DVD to VCR or VCR to DVD. Check the remaining time on the tape and Disc.
Press the buttons to select desired copylist, then press the ENTER or button.
DVD-RAM(VR) Edit Copylist

To copy from DVD to VCR

JAN/01/2006 12:00 AM

No. Title

Length Edit Play 01 JAN/01/2006 12:0 00:00:11 Rename 02 JAN/01/2006 12:0 00:00:09 Edit Scene Copy Delete

Insert the VHS tape you want to copy. Insert a recordable DVD disc. Press DVD copy button on front panel or remote control(TO DVD). To stop recording press the STOP button.

68 - English

Page 69

Playing the Title List

This section introduces basic functions of DVD editing and explains both edit functions for the recording on a disc and edit functions for the entire disc. Follow these instructions to play back a scene from the Title List.
Using the TITLE LIST button
Press the TITLE LIST button. The Title List screen is displayed.
DVD-RAM(VR) JAN/01/2006 No. Title 12:00 12:30 01:00 01:JAN/01/JAN/01/JAN/01/JAN/01/2006 00:00:11 00:00:09 00:01:36 00:00:11 Title List 1/4 Length Edit
JAN/01/2006 12:00 AM CH1 JAN/01/2006 SP
Playing the Title List..69 Basic Editing (Title List)...71 Renaming(Labeling) a Title..71 Locking(Protecting) a Title...72 Deleting a Title...73 Deleting a Section of a Title..73 Editing a Chapter...75 Dividing a Title...77 Advanced Editing (Playlist)..78 Creating a playlist...78 Playing Titles in the Playlist..79 Renaming a Playlist Title..79 Editing a Scene for the Playlist..80 Copying a Playlist Title to the VCR..83 Deleting a Playlist Title from the Playlist..84 Disc Manager..84 Editing the Disc Name...84 Disc Protection...85 Formatting a Disc..86 Finalizing a disc...86 Unfinalizing a disc (V/VR mode)..87 Delete All Title Lists...88 Edit Compatible...89
Press the buttons to select a title you want to play from Title List, and then press the PLAY button. The selected title will be played back. To stop title play, press the STOP button. To return the title list screen, press the TITLE LIST button.

Using the MENU button

DVD-RAM(VR) Title List Playlist Disc Manager Timer Rec. Setup Copy MOVE ENTER RETURN Title List

Title List

English - 69

12:0 PM

Page 70
Press the buttons to select Title List, then press the ENTER or button twice.

English - 77
00995A(01)-VR330_XAA-Eng2

2006.3.21

2:47 PM

Page 78

Advanced Editing (Playlist)

Creating a Playlist

Follow these instructions to create a new playlist title from a recorded title.
Press the ENTER button at the end point.
DVD-RAM(VR) Scene No. 003 Start End Make Scene

Title List : 1/31

00:00:08 00:00:08

Make ENTER RETURN

The image and end point time are displayed in the End window. The yellow-colored selection bar moves to the Make icon.
With the unit in Stop mode, press the MENU button. Press the buttons to select Playlist, then press the ENTER or button.
DVD-RAM(VR) Title List Playlist Disc Manager Timer Rec. Setup Copy MOVE ENTER RETURN EXIT New Playlist Edit Playlist
- To make a new playlist -

Playlist

Press the buttons to select Make, then press the ENTER button. A new Scene will be added to the current Playlist. A new Make Scene screen is displayed. You can check and see all the scenes on Edit Playlist screen. Repeat steps 1~6 if you want to make a new playlist. Repeat steps 4~6 if you want to add scenes to the playlist.
Press the buttons to select New Playlist, then press the ENTER or button. The Make Scene screen is displayed.
- To return to Edit Playlist menu -

00:00:00 00:00:00

Press the buttons to select Return, then press the ENTER button. The Edit Playlist screen is displayed.
DVD-RAM(VR) Edit Playlist
Press the ENTER button at the start point.

Length Edit

01 JAN/01/2006 12:00 00:00:JAN/01/2006 12:30 00:00:JAN/01/2006 01:00 00:00:05

MOVE Title List : 1/31

Press the MENU or PLAY LIST button after the operation has finished. The Edit Playlist screen will disappear.
The image and time at the start point are displayed on the Start window. The yellow-colored selection bar moves to the End item. Select the starting point of the section from which you want to create a new scene using the playback related buttons (II,I ,I, ,). You can create up to 99 playlist titles. Depending on the kind of disc, the displayed screen may have a slight difference.

78 - English

Page 79
Playing Titles in the Playlist
Follow these instructions to play the playlist titles.
Press the PLAY LIST button with the disc stopped. The Edit Playlist screen is displayed. Or use the MENU button. Press the MENU button with the disc stopped. Press the buttons to select Playlist, then press the ENTER or button. Press the buttons to select Edit Playlist, then press the ENTER or button.
Press the STOP button to stop playing. The screen returns to the Edit Playlist screen.
Renaming a Playlist Title

You will be prompted with the confirmation message 'All data will be deleted. Do you want to continue?'.

86 - English

11:25 AM

Page 87

DVD-RW(VR) Title List Playlist Disc Manager Timer Rec. Setup Copy MOVE ENTER RETURN EXIT Disc Name Disc Protection Disc Format Disc Finalize Delete All Title Lists : : Not Protected : DVD-VR
Press the buttons to select Yes, then press the ENTER button. The disc is finalized.
Once a disc is finalized, you cannot delete titles from the record list. Once a DVDR/DVD-RW (video mode)disc is finalized, it is playable in a standard DVD player. Depending on the disc type, the displayed screen may be different.
Press the button to select Disc Finalize, then press the ENTER or button.
Finalizing time may be different depending on the amount of data recorded on the disc. Data on the disc will be damaged if the recorder is powered off during finalize process.
Unfinalizing a disc (V/VR mode)
DVD-R(V) Title List Disc Manager Timer Rec. Setup Copy Disc Name Disc Protection Disc Finalize Delete All Title Lists :

Title List DVD-RW(VR:F)

: Not Protected
Title List Playlist Disc Manager
You will be prompted with the message 'Do you want to finalize disc?'.
DVD-RW(VR:F) Title List Playlist Disc Manager
: DVD-VR Disc Manager Disc Format Do you want to finalize disc? Disc Finalize Timer Rec. Delete YesTitle Lists No All Setup Copy MOVE ENTER RETURN
Disc Name Disc Format Disc Unfinalize

: : DVD-VR

Disc Manager Timer Rec.
If you select Yes, you will be prompted again with the message 'Disc will be finalized. Do you want to continue?'
DVD-Video(RW) Title Menu Disc Menu Disc Manager Timer Rec. Disc Format Disc Unfinalize

: DVD-V

: DVD-VR Disc will Disc Manager Disc Format be finalized. DiscDo you want to continue? Finalize Timer Rec. Delete YesTitle Lists No All Setup Copy MOVE ENTER RETURN
Setup Copy EXIT MOVE ENTER RETURN EXIT

English - 87

Page 88
Press the button to select Disc Unfinalize, then press the ENTER or button. You will be prompted with the message 'Do you want to unfinalize disc?'.
DVD-RW(VR:F) Title List Playlist Disc Name Disc Format :
DVD-RAM(VR) Title List Playlist Disc Manager Title List

: DVD-VR

Disc Manager Disc Unfinalize Do you want to unfinalize disc? Timer Rec. Setup Copy MOVE ENTER RETURN Yes No

Timer Rec. Setup Copy

If you select Yes, you will be prompted again with the message 'Disc will be unfinalized. Do you want to continue?'
DVD-RAM(VR) Title List Playlist Disc Manager Timer Rec. Disc Name Disc Protection Disc Format : : Not Protected :

Page 90

Troubleshooting

Specifications
Troubleshooting (DVD-VIDEO/DVD-RAM/DVDRW/DVDR)..91 Troubleshooting (DVD)...92 Troubleshooting (VCR)..93 Problems and Solutions (Display error Message).94 Specifications...96
LIMITED WARRANTY TO ORIGINAL PURCHASER

90 - English

Page 91
Troubleshooting (DVD-VIDEO/DVD-RAM/DVDRW/DVDR)
If your product malfunctions, go through the check points below before contacting a Samsung authorized service center,

Problem No power.

Explanation/Solution Check whether the power cord is securely plugged into the power outlet. Did you press the power button of your DVD Recorder & VCR. The DVD Recorder & VCR requires some time to initialize after it is turned on. If Quick recording function is set to on, the DVD Recorder & VCR will power on quickly, which enables you to immediately record a desired channel. (See page 41.) Check whether the power cord is securely plugged into the power outlet. Did you set the DVD Recorder & VCR channel settings correctly? Check the free space on your DVD-RAM/DVDRW/DVDR disc. Check the antenna cable is connected. Check the recording time, end time and current time settings again. Recording will be cancelled if the power is interrupted due to a power failure or other reason during recording. Check whether the disc is formatted. This product can record on formatted discs only. (See page 86.) Check whether your DVD-RAM/DVDRW/DVDR disc has a sufficient free space. Recording is available on DVD-RAM/DVDRW/DVDR discs only. If a program is copy protected, you cannot record it.
The input is displayed for a while when the power turns on. Cannot record TV programs.
Timer recording does not work properly.

Cannot record.

I pressed the REC button but there is no response. I forget the password for parental lock.
Press and hold the CH ( / ) button on the front panel of your unit for more than 5 seconds with no disc, and then press the POWER OFF/ON button. All settings including password will revert to factory settings. Do not use it if not absolutely required. (Note that this function is available only when there is no disc inserted.) Check whether the disc is inserted correctly with the label facing up. Check the regional code of your DVD disc. This DVD Recorder & VCR cannot playback some types of disc. (See page 5.) Are you watching a program in slow or skip mode? If you are playing a program at a speed other than normal speed, sound is not output. (Except for forward search Playback (Fast1)) Check the connections and initial settings. Check whether the disc is damaged. Clean up the disc, if necessary. Check whether the disc is inserted correctly with the label facing up.

Cannot play the disc.

No sound.

English - 91

Page 92

Troubleshooting (DVD)

Problem icon appears on the screen. Play mode settings are different from the settings configured with the Setting menu. Cannot change the aspect ratio. No audio output. No video or audio output. The disc tray is ejected after 2 to 5 seconds. Angle operation does not work during playback of a DVD disc. The disc revolves, but no image or bad quality images are output.

96 - English

Page 97
SAMSUNG DVD RECORDER & VCR
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) Year Parts / Ninety (90) days Labor (90 days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNGs authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. SAMSUNG s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an AS IS basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To obtain warranty hardware service, please contact SAMSUNG at: Samsung Electronics America, Inc.

doc1

Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC power cord from the AC outlet. Do not use benzene, thinner, or other solvents for cleaning. Wipe the cabinet with a soft cloth.

3/10/08

9:22 AM

Page 5

BEFORE

Y O U S TA R T

Before you start

Accessories

Remote Control AK59-00061J
Batteries-2EA 1.5V(AAA) AC43-12002H
Video/Audio Cable AC39-00073A

Users Guide AK68-01623B

Install Batteries in the Remote Control
Open the battery cover on the back of the remote control.
Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly.
Replace the battery cover.
If the remote control doesnt operate properly:
Check the polarity +, - of the batteries. Check if the batteries are drained. Check if the remote control sensor is blocked by obstacles. Check if there is any fluorescent lighting nearby.

Page 6

TA B L E

CONTENTS

Table of Contents
Safety Instructions.....2 Important Safety Instructions....2 Precautions.....3 Before you start.....5 Accessories.....5 Install Batteries in the Remote Control...5

Chapter 1: Setup

General Features.....8 Disc Type and Characteristics....9 Description.....10 Tour of the Remote Control....12

Chapter 2: Connections

Before Connecting the DVD-VCR....13 Connecting a Set-top/Cable/Satellite Box to the DVD-VCR..13 Connection to a TV....14 Connecting to a TV with an HDMI Jack....14 Connecting to a TV (Progressive)....16 Connecting to a TV (Interlace)...17 Connecting to a TV (Video)....18 Connection to an Audio System....19 Connecting to an Audio System (2 Channel Amplifier, Analog)...19 Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)..20 Connecting the Power Cord....21

Chapter 3: Initial Setup

Selecting a Menu Language....22 Setting the Clock.....23 Setting the Clock Manually....23 Setting the Front Panel Display....24 Setting the Auto Power Off....25
Chapter 4: DVD Operations
Playing a Disc.....26 Using the Search and Skip Functions....28 Using the Display Function....29 Using the Disc and Title Menu (DVD)....31 Using the Function Menu (DVD)....32 Repeat Play....33 Slow Play.....34 Adjusting the Aspect Ratio (EZ View)....35 Selecting the Audio Language....37

Page 7

Selecting the Subtitle Language....38 Changing the Camera Angle.....39 Using the Bookmark Function (DVD)....39 Using the Zoom Function (DVD)....41 Clips Menu for CD Audio/MP3/WMA/JPEG/MPEG4 files...42 Folder Selection.....42 CD Audio/MP3/WMA Playback....43 MPEG4 Playback.....45 Picture CD Playback....47 Using the Setup Menu.....49 Setting Up the Language Features....50 Setting Up the Audio Options.....52 Setting Up the Display Options....54 Setting Up the Parental Control....58 DivX(R) Registration....61
Chapter 5: VCR Operations
Inserting and Ejecting a Video Cassette Tape....62 Playing a Pre-Recorded Video Cassette Tape....63 Special VCR Playback Features....64 Using Automatic Tracking....65 Selecting the Cassette Type....66 Setting the Auto Play.....67 Setting the Auto Repeat....68 Using the Tape Counter....69 Using the Assemble Edit Function....70 Selecting the Audio Output Mode....71 Searching for a Specific Sequence...72 Basic Recording.....74 Special Recording Features....75 Using One-Touch Recording.....76 Selecting the Recording Speed....77 Making a Timer Recording....78

Chapter 6: Reference

Using the TV Buttons on the Remote Control....80 Troubleshooting.....81 Technical Specifications....83

Page 8

Chapter 1

General Features

DVD-VCR Features
Perfect compatibility to play back DVDs, audio CDs or VHS Tapes. Composite, Component Video and HDMI outputs. On-Screen Program (English/French/Spanish).
Note This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

DVD Features

10-bit video digital to analog converter and 54MHz advanced digital filter. Playback of 96KHz/24-bit sources. DTS digital output for DTS-enhanced DVDs. This unit can play MPEG4 formats within an avi file. Playback MP3-CDs.

COPY PROTECTION

Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVDVCR directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copyprotected DVD discs. This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Play Region Number NTSC broadcast system in U.S.A, Canada, Korea, Japan, etc. Dolby Digital disc

STEREO

DIGITAL SOUND
Stereo disc Digital Audio disc DTS disc MP3 disc

DivX Certification

You must only insert one DVD disc at a time. Inserting two or more discs will not allow playback and may cause damage to the DVD-VCR. DivX, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc and are used under license.

2/27/08

11:37 AM

Page 10

Description

Front Panel Controls

DISC TRAY Place the disc here. OPEN/CLOSE Press to open and close the disc tray. VCR Deck Insert a standard VHS video tape. EJECT Press to eject a video tape if the tape is stopped. (POWER) Press to turn the DVD-VCR on and off. LINE IN 2 Connects to the Video/Audio output jack of your external device. Front Panel Display Operation indicators are displayed here. LINE IN SELECT Press to select Line Input 1 or 2. These buttons are also used as Tracking buttons for the VCR.
DVD/VCR Press to select DVD or VCR mode. HDMI HDMI Output resolution setup. REC (VCR) Press to begin recording. (Reverse/Rewind) Press to reverse/rewind a disc/video tape. (STOP) Press to stop a disc/video tape during playback or record (VCR). (Play/Pause) Press to play or pause the disc/video tape. (Forward/Fast Forward) Press to forward/fast forward a disc/videotape.

Front Panel Display

5 DVD is activated. The time, counter position, time remaining or current deck status is indicated. VCR is activated. DVD or CD media is loaded. VHS videotape is loaded.

ENG-10

3/6/08

10:42 AM

Page 11

Rear Panel

AUDIO OUT Connect to the Audio input jacks of your television. COMPONENT VIDEO OUT - Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video. 5 4
DIGITAL AUDIO OUT (OPTICAL/COAXIAL) - Use either an optical or coaxial digital audio cable to connect to a compatible Dolby Digital receiver. - Use either an optical or coaxial digital audio cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder. LINE IN 1 (VIDEO/AUDIO) Connect to the Video/Audio output jack of your external device. LINE OUT (VIDEO/AUDIO) Use a Video/Audio cable to connect to the Video/Audio input jacks on your television. You must have these jacks connected to see video playback from the VCR on your TV.
3. HDMI OUT JACK - Use an HDMI cable to connect this jack to the HDMI jack on your television for the best quality picture. - If an HDMI cable is connected to an HDMIcompatible TV, HDMI will be output automatically within 10 seconds. - If you want to use the Video or Component Output, unplug the HDMI cable.

ENG-12

Page 13

Chapter 2

CONNECTIONS
Before Connecting the DVD-VCR
- Always turn off the DVD-VCR, TV, and other components before you connect or disconnect any cables. - Refer to the users manual of the additional components (such as a TV) you are connecting for more information on those particular components.
Connecting a Set-top/Cable/Satellite Box to the DVD-VCR
The following instructions show how to connect a Set-Top Box,TV and Amplifier to the DVD-VCR.
Use a TV antenna cable to connect the signal source coming from the antenna or wall to the ANT IN jack on the STB.
Use the Video/Audio Cable to connect the LINE OUT jacks on the STB to the AUDIO/VIDEO LINE IN 1 jacks on the DVD-VCR.

Video Cable Audio Cable

Select LINE 1 by pressing LINE IN SELECT button on the front panel or INPUT SEL. button on remote control in VCR mode.

DVD-V9700

Video Cable

Audio Cable

Use the Video/Audio Cable to connect the LINE AUDIO OUT(R/L)/VIDEO OUT jacks on the DVDVCR to the Audio & Video jacks on the TV. Tunerless DVD Player & VCR This DVD-VCR unit does not have a TV tuner. Recording TV broadcasts is possible via Connection to Cable/Satellite boxes and Multi Channel Video Services. Notes - If you want to use other connections to a TV, please refer to the TV connection pages. (See pages 14 to 18) - If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20) - When you connect a STB through the LINE IN 1 jack of the DVD-VCR, you still can see the picture from the STB on your TV set if the DVD-VCR is turned off.

ENG-13

10:49 AM

Page 14

Connection to a TV
The following shows examples of connections commonly used to connect the DVD-VCR with a TV and other components.
Connecting to a TV with an HDMI Jack
Using an HDMI-HDMI cable, connect the HDMI OUT jack on the rear of the DVD player to the HDMI IN jack of your TV.

Press the input selector on your TV remote control until the HDMI signal from the DVD player appears on your TV screen.

HDMI Cable Not included

HDMI VIDEO Specifications When you press the HDMI button on the front panel, 480p, 720p, and 1080p are selected in order. The first press of the HDMI button on the front panel brings up the current resolution. The second press allows you to change the HDMI output resolution. - Depending on your TV, certain HDMI output resolutions may not work. - Please refer to the users manual of your TV. - When using an HDMI connection, the DVD players output is set to HDMI within 10 seconds. - For better picture quality, set the HDMI output resolution to 720p or 1080p (see page 56). - If you connect an HDMI cable between Samsung TV and this DVD player, you can operate this DVD player using your TV remote control. This is only available with Samsung TVs that support Anynet+(HDMICEC).( see page 56-57) - If your TV has an logo, then it will supports the Anynet+ function.

ENG-14

Page 15
HDMI (High Definition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and audio data with just a single cable. Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.
HDMI connection description
HDMI consists of uncompressed video and digital audio data (LPCM or Bit Stream). - The player outputs only a pure digital signal to the TV through HDMI. - If TV does not support HDCP (High-bandwidth Digital Content Protection), snow noise appears on the screen.
Why does Samsung use HDMI?
HDMI provides an interface between any compatible digital audio/video source, such as a set-top box, a DVD player, a PC, a video game system, or an AV receiver and a compatible digital audio and/or video monitor, such as a digital television (DTV). HDMI supports any TV or PC video format with digital high-definition pictures.

ENG-15

Page 16
Connecting to a TV (Progressive)
Using Component video cables (not included), connect the COMPONENT VIDEO OUT jacks on the rear of the DVD-VCR to the COMPONENT IN jacks of your TV.
Using the audio cables, connect from the AUDIO OUT or LINE OUT AUDIO (red and white) jacks on the rear of the DVD-VCR to the AUDIO (red and white) IN jacks of your TV. Turn on the DVD-VCR and TV.
Audio Cable Component Cable (not included) Red Blue Green White Red Green Blue Red

ENG-18

Page 19
Connection to an Audio System
Connecting to an Audio System (2 Channel Amplifier, Analog)
Using the audio cables, connect the (LINE) AUDIO (red and white) OUT jacks on the rear of the DVD-VCR to the AUDIO (red and white) IN jacks of the Amplifier.
Using the video signal cable(s), connect the VIDEO or COMPONENT OUT jacks on the rear of the DVD-VCR to the VIDEO or COMPONENT IN jack of your TV as described on pages 14 to 18.

Red Red White

Audio Cable White
Turn on the DVD-VCR, TV, and Amplifier.

2-channel Stereo Amp.

Press the input select button of the Amplifier to select the External input in order to hear sound from the DVD-VCR. Refer to your Amplifier's user manual to set the Amplifier's audio input.
Notes - Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears. - Please set the audio in the menu screen according to the Amplifier. (See pages 52 to 53) - The position of jacks may vary depending on the Amplifier. Please refer to your Amplifier's user manual. - You can also connect the amplifier using the AUDIO OUT (red and white) jacks from the DVD-VCR.

ENG-19

2:00 PM

Page 20

Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
Using a Coaxial cable or an Optical cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) or DIGITAL AUDIO OUT (OPTICAL) jack on the rear of the DVD-VCR to the DIGITAL AUDIO IN (COAXIAL) or DIGITAL AUDIO IN (OPTICAL) jack of the Amplifier.
Optical Cable (not included)
Coaxial Cable (not included)
Dolby digital or DTS Amp.
Press the input select button of the Amplifier to select external input in order to hear sound from the DVD-VCR. Refer to your Amplifier's user manual to set the Amplifier's audio input.
Notes - Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears. - Please set the audio in the menu screen according to the Amplifier. (See pages 52 to 53) - The jack position may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.

ENG-20

Page 21
Connecting the Power Cord
Your DVD-VCR's power cord should be plugged into a standard 120V/60Hz wall outlet.
Turn on the power by pressing the POWER button on the remote control or on the front panel.
Turn on your TV by pressing the POWER button on the TV remote control.
Press the input selector on your TV remote until the signal from the DVD-VCR appears.

ENG-43

Page 44

CD-R MP3/WMA file

When you record MP3 or WMA files on a CD-R, please refer to the following. - Your MP3 or WMA files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and with Apple's Mac. This format is the most widely used. - When naming your MP3 or WMA files, do not exceed 8 characters, and enter.mp3,.wma as the file extension. General name format : Title.mp3. or Title.wma. When composing your title, make sure that you use 8 characters or less, have no spaces in the name, and avoid the use of special characters including: (.,/,\,=,+). - Use a decompression transfer rate of at least 128 Kbps when recording MP3 files. Sound quality with MP3 files basically depends on the rate of compression/decompression you choose. Getting CD audio sound requires an analog/digital sampling rate, that is conversion to MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps or more, only rarely give better sound quality. Conversely, files with decompression rates below 128 Kbps will not be played properly. - Use a decompression transfer rate of at least 64Kbps when recording WMA files. Sound quality with WMA files basically depends on the rate of compression/decompression you choose. Getting CD audio sound requires an analog/digital sampling rate, that is conversion to WMA format, of at least 64Kbps and up to 192Kbps. Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played properly. - Do not try recording copyright protected MP3 files. Certain "secured" files are encrypted and code protected to prevent illegal copying. These files are of the following types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM (registered trade mark of The SDMI Foundation). You cannot copy such files. - Important: The above recommendations cannot be taken as a guarantee that the DVD-VCR will play MP3 recordings, or as an assurance of sound quality. You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent optimal playback of these files on your DVD-VCR (degraded sound quality and in some cases, inability of the player to read the files). - This unit can play a maximum of 500 files and 500 folders per disc.

ENG-44

Page 45

MPEG4 Playback

MPEG4 Play Function
AVI files are used to contain the audio and video data. Only AVI format files with the.avi extensions can be played.
Open the disc tray. Place the disc on the tray. Close the tray.

WMA JPEG MP3 MPEG4

Press the or buttons to select an avi file (DivX/XviD), then press the ENTER button.
/MPEG4. a01_divx51b-8 a02_divx505b-8 a03_divx502sp-8 a04_divx412-8

Repeat Playback

Press the REPEAT button to change playback mode. There are 3 modes, such as Off, Title, Folder - Off : Normal playback. - Title : Repeats the title that is playing. - Folder : Repeats the AVI files which have the same extension in the current folder.

ENG-45

Page 46
MPEG4 Function Description
Function ( Skip or ) Description Reference page -
CD-R AVI file This unit can play the following video compression formats within the AVI file format: - DivX 3.11 contents - DivX 4 contents (Based on MPEG4 Simple Profile) - DivX 5 contents (MPEG4 simple profile plus additional features such as bi-directional frames. Qpel and GMC are also supported.) - XviD MPEG4 compliant Contents. This unit supports all resolutions up to maximum below. DivX3.11 & DivX4 & XviD
Bitrate may fluctuate: Device may skip decoding the high bitrate portions and begin decoding again when Bitrate returns to normal.
During play, press the or button, it moves forward or backward 5 minutes. During play, press the SEARCH ( or ) button and press Search again to search at a faster ( or ) speed. Allows you to search at a faster speed in an AVI file. (2X, 4X, 8X) Allows you to search at a Slow Motion slower speed in an AVI file. Play (1/8X, 1/4X, 1/2X) Each time the STEP button Step Motion is pressed, a new frame will Play appear. ZOOM Allows you to zoom in on the screen 2X/4X/2X/Normal in order

P 26 P 41

720 x 480 @30fps 720 x 576 @25fps : Maximum bitrate : 4Mbps
- These functions may not work depending on MPEG4 file.
Notes - Some MPEG4 files created on a personal computer may not be able to be played back. That is why Codec Type, Version and Higher resolution higher than the specifications are not supported. - This unit supports CD-R/RW written in MPEG4 in accordance with the ISO9660 format. - When unsupported AVI file is played, there will be a message This file format is not supported.

ENG-46

Page 47

Picture CD Playback

Select the desired folder then press the ENTER button.
Picture 1. Picture 1 Picture 2 Picture 3
Press the buttons to select a Picture file in the clips menu, then press the ENTER button.
Press the INFO. button to display the menu. Press the buttons to select the menu you want to view, then press the ENTER button. Rotation

ENG-51

01623B_V9800_XAA_Eng2

2:06 PM

Page 52
Setting Up the Audio Options
Audio Options allows you to set up sound for use with your external audio system.
With the DVD in Stop mode, press the MENU button on the remote control.
Press the buttons to select Audio Setup, then press the or ENTER button.
- To make the DVD Setup menu disappear, press the MENU button.

ENG-52

Page 53

Audio Options

Dolby Digital Out - PCM: Converts to PCM(2CH) audio. - Bitstream: Outputs Dolby Digital via the digital output. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.
Dynamic Compression - On: When the moviesoundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud. - Off: To select the standard range.
- Dynamic compression restrains the
dynamic range of the sound, i.e. the difference between the loud and quiet passages of a DVD audio track. This is useful when watching a DVD late at night.
PCM Down Sampling - On: Select this when the Amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be converted down to 48KHZ. - Off: Select this when the Amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes.
Note Even when PCM Down sampling is Off, some discs will only output down sampled audio through the digital outputs.

ENG-53

Page 54
Setting Up the Display Options
Display options enable you to set various video functions of the player.
Press the buttons to select Display Setup, then press the or ENTER button.

ENG-54

Page 55

Display Options

TV Aspect Depending on the type of television you have, you may want to adjust the aspect ratio (screen setting).
- 4:3 Letter Box: Select when you want to see the total 16:9 ratio screen the DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. - 4:3 Pan & Scan: Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.) - 16:9 Wide: You can view the full 16:9 picture on your wide screen TV.

ENG-66

Page 67

Setting the Auto Play

If you want your videotapes to play automatically when you insert them, turn on Auto Play.
Note Only tapes that are missing the Record Safety Tab will play automatically when inserted (See page 74).
Press the buttons to select Auto Play, then press the or ENTER button to select On or Off.
- On: The VCR will automatically begin playing a video tape when it is inserted, as long as the safety tab of the cassette has been removed. - Off: Auto play is disabled.

ENG-67

Page 68

Setting the Auto Repeat

If you want your videotapes to play repeatedly, turn on Auto Repeat.
Press the buttons to select Auto Repeat, then press the or ENTER button to select On or Off.
- On: The VCR will play a tape repeatedly [unless a tape control is activated (stop, fast forward or rewind)]. - Off: Auto Repeat is disabled.

ENG-68

Page 69

Using the Tape Counter

The tape counter: - Indicates the elapsed time in the play and record modes (hours, minutes and seconds). - Is reset when a cassette is inserted in the DVD-VCR. - Allows you to easily find the beginning of a sequence. - If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.
Insert a cassette in your DVDVCR. To set the tape counter to zero at the beginning of a sequence: - Press the INFO. button twice to display the counter - Press the CLEAR button when you want to set the tape counter to zero.
When you are ready, - Start playback or recording. - Press the (Stop) button. - To fast-forward or rewind to the sequence at which the counter was set to zero, press the the / (Forward) or / (Rewind) buttons on the remote control. - Some DVD-VCR information, such as the counter, can be displayed on the television screen. Press the INFO. button: - Once to display the current function, recording speed and counter. - Twice to display the counter only. - Three times to display the time remaining on the cassette. - Four times to clear the display.

ENG-69

Page 70
Using the Assemble Edit Function
This function allows you to start a new recording at a specific position on the cassette while maintaining a very smooth scene change.
Insert the cassette to be edited in your DVD-VCR.

If you experience other problems.
The picture is noisy or distorted

Identifying VCR Problems

No power You cannot insert a video cassette The television program was not recorded
Timer recording was unsuccessful No playback picture or the picture is
Check that the power plug is connected to a wall outlet. A video cassette can only be inserted with the window
side up and the safety tab facing you.
Check the DVD-VCR antenna/cable connections. Is the DVD-VCR tuner properly set? Check if the safety tab is intact on the cassette. Re-check the recording start/stop time settings. If there was a power failure or interruption during timer

P78-79

recording, the recording will have been cancelled.
Check to see if you are using a prerecorded tape.

distorted

You cannot see normal broadcasts Noise bars or streaks on playback When the button is pressed during playback, the still picture has severe noise bar streaks Video Head Cleaning Check the tuner or external setting. It should be on tuner. Check the TV or VCR antenna connections. Press the TRK buttons to minimize this effect. A still picture may have noise bars, depending on the
condition of the tape. Press the TRK buttons during slow motion to minimize this effect.
If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem and unless it appears, the heads should not be cleaned. When cleaning the video heads, read all instructions provided with the head cleaning cassette. Incorrect head cleaning can permanently damage the video heads. ENG-82

Page 83

Technical Specifications
AUDIO Inputs VIDEO AUDIO AUDIO (DVD only) VIDEO VIDEO (DVD only) HDMI VIDEO SYSTEM 2 Stereo audio inputs, RCA Connector, -8dbm, 47K, front and rear 2 Composite video inputs, RCA Connector, 75, 1Vp-p 1 Stereo audio outputs, RCA Connector, -8dbm, 1.5K 2 Digital audio output (1 coaxial, 1 optical) 1 pair Stereo audio outputs Outputs 1 Composite video output, RCA Connector, 75, 1Vp-p 1 Component video output, 75, Y=1.0Vp-p, Pb=0.7Vp-p, Pr=0.7Vp-p 1 HDMI output 1/2-inch VHS system, 4 rotary head helical scanning; FM azimuth luminance;chrominance: converted sub system phase shift AUDIO TRACK PLAY/RECORD TIME FF/REW TIME VCR HEADS Normal: 1 track; Hi-Fi: 2 track T-180 tape: SP 3 hours, SLP 9 hours T-120 tape: <2 minutes Video: Audio: Control: Erase: WOW & FLUTTER FREQ. RESPONSE DISC COMPATIBILITY FREQ. RESPONSE DVD S/N RATIO DYNAMIC RANGE THD POWER REQUIREMENT SYSTEM ENVIRONMENT WEIGHT DA 4 rotary 2 rotary heads (Hi-Fi); 1 stationary head (Linear) 1 stationary head 1 full track, 1 audio track
Less than 0.005% (Hi-Fi) 20-20,000 Hz (Hi-Fi) CD, CD-R, CD-RW DVD-Video, CD-Digital Audio (5 and 3.5) 96/48 kHz Sampling: 4 Hz-22kHz 110 dB 96 dB 0.003 % 120V AC, 60 Hz, 25 watts 41-104F (5-40C); 10%-75% humidity 13.8 lbs.

Web Site

www.samsung.com/ca www.samsung.com/mx www.samsung.com/us www.samsung.com/ar www.samsung.com/br www.samsung.com/cl www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com.co www.samsung.com/be www.samsung.com/cz www.samsung.com/dk www.samsung.com/ www.samsung.com/fr www.samsung.de www.samsung.com/hu www.samsung.com/it www.samsung.com/be www.samsung.com/nl www.samsung.com/no www.samsung.com/pl www.samsung.com/pt www.samsung.com/sk www.samsung.com/es www.samsung.com/se www.samsung.com/uk www.samsung.com/ie www.samsung.com/at www.samsung.com/ch www.samsung.ru www.samsung.kz www.samsung.uz www.samsung.ua www.samsung.lt www.samsung.com/lv www.samsung.ee www.samsung.com/au www.samsung.com/nz www.samsung.com.cn www.samsung.com/hk www.samsung.com/in www.samsung.com/id www.samsung.com/jp www.samsung.com/my www.samsung.com/ph www.samsung.com/sg www.samsung.com/th www.samsung.com/tw www.samsung.com/vn www.samsung.com.tr www.samsung.com/za www.samsung.com/mea

Latin America

Europe

Asia Pacic

Middle East & Africa

ENG-86

DVD contact-XEU.indd 1 2007-08-13 5:39:18

Page 87

Warranty
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for the following limited warranty period:
One (1) Year Parts / Ninety days (90) Labor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States, and does not include transportation, installation, removal or reinstallation. Warranty repairs must be performed by SAMSUNGS authorized service center. To receive warranty service, the original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNGS authorized service center. Transportation to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found to be defective during the limited warranty period specified above. The product must be returned during the warranty period with transportation charges prepaid to SAMSUNGs designated service center. Prior to returning any product for warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the product. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product and shall not apply to the following, including, but not limited to: damage which occurs in shipment; applications and uses for which this product was not intended; failures or problems which are caused by products or equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect, misapplication, fire, water, lightning or other acts of nature; incorrect electrical line voltage, fluctuations or surges; damage caused by improper or faulty installation; improper connection with any peripheral; product alteration or modification; improper or unauthorized repair; cosmetic damage or exterior finish; product with altered serial numbers; failure to follow operating instructions, customer adjustments, maintenance and environmental instructions that are covered and prescribed in the instruction book; use of non-SAMSUNG or unauthorized parts, supplies, accessories or equipment which damage this product or result in service problems; failures or problems due to incompatibility with other equipment.

01623B_V9800_XAA_Eng3

7:48 AM

Page 88

Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. 1-800-SAMSUNG (7267864) / www.samsung.com Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 1-800-SAMSUNG (7267864) www.samsung.com

AK68-01623B-01

 

Tags

VR888 R-207 FP567 GL2200 Citation 19 Mcbc580DBT SGH-L760V Photosmart R607 KDC-MP5028 Duke R 4 0 Voyage 200 DHT-1311XP 15PT1767 Iii Plus DSC-S700 DR-4800PM Review 720-0001 IHD 91 Toolbox YV-150PX Eldorado 1997 PFM42V1 RH7000 CI1100 HT-X810T GA9020SF Rxl 70 60IRV PD-M430 Presto PVR Super P5VDC-tvm SE IC-230 System CPX 900 HT-BD2t XAA Letra TAG AV300 Nikon D1H TX-NR3007 Control RF20 BT100 TH-65PF10 Plantronics M100 EX1011 Digitech RP50 Audioline 702 LV4987 A8R32-mvp-DLX STR-DH500 TV-R7000 CL7100 Ensoniq DP-2 BH-503 DSM-320RD VSX-420-K 1200 GT DMC-FS62 TPH05 Rayline TA6 SE 145 21PT350A Univers41 Pc-link MIO C720 6 0 C316BEE RMR683HGA CA260 Cinema-EHD2-100 SGH-E870 E-620 Fb775BE-ultra KV-32DRX7 1290F-W GC2020C Schuko KX-TCD150JT Arena 5430 DL MS-120ER Ericsson T630 21FU1RK PS101 RDR-GX210 ZDF221S HT-X50 Deskjet 5443 DCR-DVD403E Nitrox Architectural 18 Rockshox SID FR731 P2010 EL-520E RX-ES50 F802V ALL-IN-one PC HTS3365 55

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101