Instruction Manual

DVD-HR720

CA AK68-00758C-01

www.samsung.ca

1-HR720-XAC_01-17

5/17/05

9:50 PM

Page 2

Warning

Getting Started
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. Do not install this equipment in a confined space such as a bookcase or similar unit. WARNING : To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture. CAUTION : HDD & DVD RECORDERS USE AN INVISIBLE LASER BEAM WHICH CAN CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE RECORDER CORRECTLY AS INSTRUCTED. CAUTION THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. CAUTIONS Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Attention: Pour viter les chocs lectriques, introdure la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond. This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.
This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere. This HDD & DVD recorder is designed and manufactured to respond to the Region Management Information. If the Region number of a HDD & DVD disc does not correspond to the Region number of this HDD & DVD recorder, the HDD & DVD recorder cannot play the disc. This device is protected by U.S. Patent Nos.4,631,603;4,577,216;4,819,098;4,90 7,093; and 6,516,132.This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.Use of this copyright protection technology must be authorized by Macrovision,and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.Reverse engineering or disassembly is prohibited.

2 - English

Page 3

Handling Cautions

Precaution
Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. if the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Once Copy Once program has been recorded on the DVD disc, this title cannot be copied to HDD anymore. But Copy Once program has been recorded on the HDD, this title can be copied to DVD-RW(VR mode) or DVD-RAM.

COPY PROTECTION

Many DVD discs are encoded with copy protection. Because of this, you should only connect your HDD & DVD RECORDER directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs. This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Using JPEG disc

CD-R, DVD-R/RW/RAM, HDD with JPEG files recorded with UDF, ISO9660 or JOLIET format can be playbacked. Only JPEG files with the.jpg or.JPG extension can be displayed. The unit can handle a maximum of 4,500 files and 1,000 sub folders under a folder. MOTION JPEG and progressive JPEG are not supported.

DVD-RW (VR mode)

This is a format that is used for recording data on a DVD-RAM or DVD-RW disc. You can record multiple titles, edit, delete, partial delete, create a playlist, etc. A disc that is recorded in this mode may not be played by existing HDD & DVD RECORDER.

Protection

This HDD & DVD RECORDER can allow you to protect the contents of your discs, as described below. Program-protected: See page 92 Locking(Protecting) a Title Disc-protected: See page 117 Disc Protection DVD-RAM/-RW/-R discs that are incompatible with the DVD-VIDEO format cannot be played with this product. For more information on DVD recording compatibility, consult your DVD-RAM/-RW/-R manufacturer. Use of poor quality DVD-RAM/-RW/-R discs may cause following unexpected problems including, without limitation, recording failure, loss of recorded or edited materials or damage to the recorder.

DVD-RW (V mode)

This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be played by existing HDD & DVD RECORDER once it has been finalized. If a disc that has been recorded in Video Mode by a different makers recorder but has not been finalized, it cannot be played or additionally be recorded by this recorder.

A variety of functions with an easy-to-use user interface
The integrated menu system and the messaging function allow you to perform desired operations both easily and conveniently. With a HDD, DVD-RAM or DVDRW disc, you can edit recorded video, create a playlist, edit video in a specific sequence according to your requirements.
Simultaneous Recording and Playback
Playback and recording for both DVDs and the built-in hard disk drive (HDD) are completely independent. For example you can record a broadcast program to either a recordable DVD or the HDD, while watching another recording you already made on the same DVD or on the HDD.
High quality digital audio and video recording and playback Record up to 16-hours of video with a double sided 9.4 GB DVD-RAM disc, up to 8-hours of images with a 4.7 GB DVD-RAM/-RW/-R disc, depending on the recording mode.
Selectable Recording Mode You can set your recorder to one of four different recording speeds, each varying in recording quality and length. EP (6Hr or 8Hr) mode yields the most recording time, LP & SP modes provide less recording time with higher quality recording, XP mode gives you the highest quality recording.

10 - English

Page 11
Before Reading the Users Manual
Make sure to check the following terms before reading the user manual.

Copyright

2005 Samsung Electronics Co. All rights reserved; No part or whole of this users manual may be reproduced or copied without the prior written permission of Samsung Electronics Co.
Icons that will be used in manual
Icon Term HDD VCD Definition This involves a function available in HDD. This involves a function available in VCD or CD-R/CD-RW discs. This involves a function available in DVD or DVD-R/DVD-RW discs that have been recorded and finalized in Video Mode. This involves a function available in DVD-RAM. This involves a function available in DVD-RW. This involves a function available in DVD-R. This involves a function available in a data CD (CD-R or CD-RW). This involves a function available in a data picture CD (CD-R or CD-RW). This involves a function available in a data CD (CD-R or CD-RW on which MP3 is recorded). This involves a case where a function does not operate or settings may be cancelled. This involves tips or instructions on the page that help each function operate.

Step 6

Finalizing & Playing on other DVD components
To play your DVD on other DVD components, finalizing may be necessary. First, finish all editing and recording operations, then finalize the disc.

Step 4

Playing
When using a DVD-RW disc in VR Mode
Although finalizing is generally unnecessary when playing the disc on a VR Mode compatible component, a finalized disc should be used for playback on that type of component.
You can select the title you want to play in a displayed menu and then immediately start playback. A DVD consists of sections, called titles, and sub sections, called chapters. During recording, a title is created between two points where you start and stop recording. Chapters will be created automatically when you finalize recording on DVD-RW/-R discs in Video mode. The chapters length (interval between chapters) varies according to the recording mode.
When using a DVD-RW disc in Video Mode
The disc should be finalized first to enable playback on anything other than this recorder. No more editing or recording can be made on the disc once it has been finalized. To enable recording on the disc again, disc should be unfinalized.

When using a DVD-R disc

You should finalize the disc to play it on a component other than this recorder. You cannot edit or record on the disc once it has been finalized.

12 - English

Page 13

Unpacking

Accessories
Check for the supplied accessories below. You can control certain functions of another manufacturers TV with this remote control. Control function buttons involve: TV POWER, CH , TV VOL + -, number buttons, TV MUTE, INPUT button.
Setting the Remote Control

Video/Audio Cable

RF Cable for TV

Remote Control

Batteries for Remote Control (AAA Size)

Quick Guide

Preparing the Remote Control
Install Batteries in the Remote Control Open the battery cover on the back of the remote control. Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly. Replace the battery cover. If the remote does not operate properly: Check the polarity + - of the batteries (Dry-Cell) Check if the batteries are drained. Check if remote sensor is blocked by obstacles. Check if there is any fluorescent lighting nearby. Dispose of batteries according to local environmental regulations. Do not put them in the household trash.

English - 13

Page 14
Controlling TVs with the Remote Control 1. Press and hold the TV POWER button. 2. Enter a 2-digit code by using the numerical buttons on the remote control.

28 - English

Page 29

Manual Clock Set

If your clock cannot be set automatically, set the clock manually.
Press the buttons to select Manual Clock Set, then press the ENTER or button.
Manual Clock Set HDD Title Music Photo Timer Record Setup Date Time
JAN / 01 / 2005 SAT 12 : 00 AM
With the unit in Stop mode, press the MENU button. Press the buttons to select Setup, then press the ENTER or button.

0~9 NUMBER

Setup HDD Title Music Photo Timer Record Setup MOVE SELECT RETURN EXIT
Using the buttons to select the Current Date and Current Time, and then press the ENTER button. When the current time is stored in memory and then the set is powered off, the current time will appear in the front panel display. : Sets the value You can set the value using the number buttons. : Moves to items
Clock Set HDD Title Music Photo Timer Record Setup MOVE SELECT RETURN EXIT

English - 29

Page 30

Auto Channel Memory

You can set the Antenna/Cable TV settings automatically.
Press the buttons to select Channel Set, then press the ENTER or button.
Channel Set HDD Title Music Photo Timer Record
Antenna/Cable TV Channel Add/Delete : Cable TV Auto Channel Memory
Setup MOVE SELECT RETURN EXIT
Press the buttons to select Antenna/Cable TV, then press the ENTER or button.
Channel Set HDD Title Music Photo Timer Record Setup MOVE SELECT RETURN EXIT
Antenna/Cable TV : Cable TV Antenna Auto Channel Memory Cable TV Channel Add/Delete
Select the item that matches the antenna connection you selected on pages 19~20(Method 1, 2 and 3).
Select Antenna or Cable TV(depending on the hookup you chose) using the buttons, then press the ENTER or button. Select Auto Channel Memory using the buttons, then press the ENTER or button. Auto Channel Memory will be displayed.
Auto Channel Memory HDD Title Music Photo Timer Record Setup SELECT RETURN EXIT
Total channel numbers: Saved channel : 11% Scanning. Stop 15/125
Press the RETURN or ENTER button to stop Auto Channel Memory.

30 - English

Page 31

Manual Channel Set

Press the buttons to select Channel Add/Delete, then press the ENTER or button.
Channel Add/Delete HDD Title Music Select channel : 01
Manual Channel Set can be used after you have first selected Auto Channel Memory. Use the Manual Channel Setting to delete unnecessary channels after using the Auto Channel Memory.
Photo Timer Record Setup MOVE SELECT RETURN EXIT Add Delete

1. PCM : Select this when you have no equipment that can decode Dolby Digital (or MPEG-2) signal. When you play Dolby Digital (or MPEG-2) sound track, the digital output are converted to PCM Stereo. 2. Bitstream : Output Dolby Digital (or MPEG-2) audio as bitstream. Select this when your AV receiver or AV amplifier have Dolby Digital (or MPEG-2) Decoder.

Dynamic Compression

This is only active when a Dolby Digital signal is detected. 1. On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud. 2. Off : You can enjoy the movie with the standard Dynamic Range.
Digital output setting is equally applied to both Dolby Digital and MPEG-2 audio. LPCM sound track is always outputted as PCM. It has no relation with Digital Output setting.
Be sure to select the correct Digital Output or you will hear no sound or loud noise.
1. Off : Doesnt output DTS signal. Select this when your AV receiver or AV amplifier does not have DTS decoder. 2. On : Outputs DTS Bitstream via digital output when you play DTS track. Select this only when your AV receiver (or AV amplifier) have DTS decoder.
When DTS soundtrack is played, sound does not output from AV Audio Output.

English - 39

Page 40
Setting up the Video display Options
This function allows you to setup the TV screen settings. This function depends on disc type. It may not work for some disc types.
Press the buttons to select the desired item, then press the ENTER or button.

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio) 1. 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. 2. 4:3 Pan/Scan : Select this for conventional size TV when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.) 3. 16:9 Wide : You can view the full 16:9 picture on your widescreen TV.

1. Current track (song): Displays the name of the track being played. 2. Displays the current folder, play index and current track size. 3. Displays available buttons. 4. This shows the operating state of a disc and a playback time corresponding to a portion that is currently played. 5. Displays the information for the folder and its tracks.
If a disc contains only MP3 files or only JPEG files, the MP3 or JPEG screen appears after the disc is loaded. If a disc contains a mix of MP3 and JPEG files, you need to select Music for MP3 files or Photo for JPEG files.

English - 65

10:09 PM

Page 66

Buttons on the Remote Control used for MP3 playback
Repeat CD (CD-DA) & MP3

Using the REPEAT button.

Press the REPEAT button repeatedly to select the repeat mode you want.
1. : Selects a track (song). 2. : Move the page up/down. 3. ENTER button: Plays the selected track (song). 4. SKIP ( ) button: Plays the next track. 5. SKIP ( ) button: Returns to the beginning of the current track when pressed during playback. If pressed again, your HDD & DVD RECORDER moves to and plays the previous track. If you press the this button within three seconds after playback starts, the previous track will be played. If you press the this button after three seconds, the current track will be replayed from the beginning. 6. STOP ( ) button: Stops a track(song). 7. PLAY ( ) button: Plays a track(song) or pauses playback. 8. ANYKEY button: The ANYKEY menu is displayed. (Copy, Play Mode, Go To Playlist, New Playlist or Select Media).
Repeat Track (CD (CD-DA)/MP3) Repeat Folder (MP3) Repeat All (CD (CD-DA)/MP3) Random (CD (CD-DA)/MP3): The random option plays a discs track in random order. Normal (CD (CD-DA)/MP3): Track on a disc are played in the order in which they were recorded on the disc.
Press the REPEAT or CANCEL button repeatedly to return to normal playback.

66 - English

Page 67

New Playlist

You can register a maximum 28 tracks in the playlist.

Press the buttons to select the Playlist you want to delete.

Press the ANYKEY button.

PLAYLIST Playlist 1 Playlist 2 Delete Playlist Go To Edit Playlist Go To Music List New Playlist
Press the buttons to select the Playlist you want to edit.

PLAYLIST 01/: 00

RETURN EXIT
Press the ANYKEY button in playlist mode.
PLAYLIST Playlist 1 Playlist 2 Delete Playlist
Press the buttons to select the Delete Playlist, then press the ENTER or button.
PLAYLIST Playlist 1 Playlist 2 Do you want to delete?
Go To Edit Playlist Go To Music List New Playlist
Press the buttons to select Yes, then press the ENTER button. The selected Playlist is deleted.

English - 69

Page 70

Go To Music List

Press the buttons to select the Go To Edit Playlist, then press the ENTER or button.

Edit Playlist CD

Press the ANYKEY button during the Playlist playback.

Playlist CD TRACK 1

Playlist 1 TRACK 1
PLAYLIST 01/04 Go To Music List 04 : 30
Press the buttons to select Go To Music List, then press the ENTER or button.
If you playlisted a wrong track, press the buttons to select wrong track, then press the ENTER or CANCEL button.

Add CDDA TRACK

Go To PlaylistPage 1/3
Press the buttons to select the Go To Playlist, then press the ENTER button. Playlist will be edited.

70 - English

Page 71

Select Media (MP3)

Playing a Picture
Insert a JPEG disc or Mixed disc (JPEG + MP3) into the disc tray.
Title CD Title Press OK or Right button for Title List.

Copy Play Mode

Go 01/15 To Playlist New Playlist 4.0 MB Select Media
Music Photo Timer Record Setup
Bryan Adams_2.mp3 Straight from the heart.mp3 Run to you.mp3 Heaven.mp3
Press the buttons to select Photo, then press the ENTER or button.
Photo List CD EXIT. DSC01189 DSC01190 DSC01191 DSC01194 Index: 1/10

MP3 This Love.mp3 HDD

DSC01192

DSC01193 MOVE

DSC01194

DSC01199 EXIT

1/2 Page
Press the buttons to select HDD or DVD, then press the ENTER or button. If there are no mp3 files on the selected media, it notifies you that there are no mp3 files and the media will not be switched.
Press the buttons to select a picture. To see the next 8 pictures, press the SKIP( button. To see the previous 8 pictures, press the SKIP( ) button.

English - 71

Page 72

Slide Show

To set up, follow steps 1~3 in page 71.

Rotate

Photo List Index: 1/10 DSC01191
Press the ENTER button to select you want to see the picture, then press the ANYKEY button.

DSC01189

DSC01190

Slideshow

DSC01193

Zoom Go To Photo List

Press the buttons to select Slide Show, then press the ENTER or button.
Press the buttons to select Rotate, then press the ENTER or button.
Photo List CD DSC01194 Index: 1/10

DSC01191

Slideshow Rotate Zoom Rotate 90 Rotate 180 Rotate 270

Slide Show Select Media

Normal Fast

Go To Photo List

Press the buttons to select the slide show speed, then press the ENTER or button. The slide show starts.
Press the buttons to select the rotate angle, then press the ENTER or button.
- To stop the Rotate - To stop the Slide Show -
Rotate Rotate Off Go To Photo List Slideshow Slideshow Off Go To Photo List
Press the buttons to select Slideshow Off, then press the ENTER or button.
Press the buttons to select Rotate Off, then press the ENTER or button.

72 - English

10:39 PM

Page 73

Slideshow Rotate Zoom Go To Photo List
Slideshow Rotate Zoom Go To Photolist
Press the buttons to select Zoom, then press the ENTER or button.
Press the buttons to select Go To Photo List, then press the ENTER or button.
Each time the ENTER button is pressed, the picture is enlarged up to x4(four times the normal size). X2 X4 X2 Normal

- To stop the Zoom -

Press the buttons to select Add, then press the ENTER button. The Add Copy List screen is displayed. Press the buttons to select you want to copy, then press the ENTER button. Other method: Press the buttons to select Add a list, then press the ENTER button. Press the buttons to select you want to copy, then press the ENTER button.
Add Copy List HDD No. 003 004
Repeat steps 8~9 to select a title you want to copy.

No. 3 Title

Rec.Mode Length 00:10:21 00:15:21 00:30:21 Start Rec. Mode [DVD] Available LP 04:00:16
JAN/18/2005 12:15A LP HS JAN/19/2005 13:15A LP HS JAN/20/2005 15:15A LP HS Add a list

MOVE SELECT

00:56:03 1.88 GB
JAN/18/2005 12:15A LP HS Add a list Add Delete Preview Rec. Mode
Press the ENTER or buttons to select Start, then press the ENTER button.
The added title lists into the copy list are copied. To cancel the copying in progress, press the CANCEL button.

110 - English

If copy list contains at least one title that cannot be copied at high speed, it performs the step 9 described on page108. Otherwise, it performs the step 9-1 described on page 108.

10:47 PM

Page 111
Deleting an Undesired Title from the Copy List
To setup, follow steps 1 to 7 in pages 109~110.
Previewing a Selected Title from the Copy List
Press the buttons to select a title you want to delete from the copy screen.
Press the buttons to select a title you want to preview in the copy screen.

No. Title

JAN/18/2005 12:15A LP HS JAN/19/2005 13:15A SP LS JAN/20/2005 15:15A SP HS Add a list
Press the ANYKEY button. Press the buttons to select Delete, then press the ENTER or button. The message Do you want to delete? is displayed.
Press the ANYKEY button. Press the buttons to select Preview, then press the ENTER or button. You can preview the selected title through the display window located at the center of the screen.
Rec.Mode Length Start Rec. Mode [DVD] Available LP 04:00:16
JAN/18/2005 12:15A LP HS 00:10:21 Do LP HS 00:15:21 JAN/19/2005 13:15A you want to delete? JAN/20/2005 15:15A LP HS 00:30:21 Add a list Yes No

01:06:03 1.88 GB

EXIT SELECT RETURN
Press the buttons to select Yes, then press the ENTER button. The selected title is deleted.
No. Title JAN/19/2005 13:15A JAN/20/2005 15:15A
Press the RETURN button to exit the Preview mode.
Rec.Mode LP HS LP HS Length 00:15:21 00:30:21 Start Rec. Mode [DVD] Available LP 04:00:16

Add a list

00:45:42 1.30 GB

English - 111

Page 112
Selecting Record Mode of Each Title from the Copy List.
You can copy multiple titles while setting different record modes for each title. To setup, follow steps 1 to 7 in pages 109~110.
Changing Record Mode of All Titles from the Copy List
You can copy multiple titles while setting the same record mode for all titles. To setup, follow steps 1 to 7 in pages 109~110.

Press the buttons to select the MP3 or JPEG folder you want to copy, then press the ANYKEY button.

Copying.

HDD MP3 Bryan Adams_2.mp3 Disc Type : HDD free space : 2939 MB MP3 Straight from the heart.mp3 total file number : 1/1 MP3 Run to you.mp3 MUSIC MP3 Heaven.mp3 Copying File Name : Bryan Adams.mp3 This Love.mp%
CANCEL Copy ROOT Go To Playlist

Song3 Song4 Song5

01/15 New Playlist __
Press the buttons to select Copy, then press the ENTER or button. Folder copy begins. Subfolders and files in the selected folder are copied.
HDD MP3 Bryan Adams_2.mp3 Disc Type : HDD free space : 2939 MB MP3 Straight from the heart.mp3 total file number : 1/16 MP3 Run to you.mp3 MUSIC MP3 Heaven.mp3 Copying File Name : Bryan Adams.mp3

This Love.mp%

English - 115

Page 116

Pressing the CANCEL button during folder copying will cancel the folder copying after the current file is copied. Up to 1,500 files and 1,000 subfolders can be copied into one folder for MP3 files. Up to 4,500 files and 1,000 subfolders can be copied into one folder for JPEG files. Files having an existing name of ***.mp3/***.jpg, is automatically renamed to ***01.mp3/***01.jpg and copied. It allows up to 999 copies to have the same name. You cannot copy an Audio CD. MP3 or JPEG files can be copied only from a disc to the HDD. The sizes of a file in a disc and the copied one in the HDD may be slightly different due to the file system.

Editing the Disc Name

Follow these instructions to give a name to a disc.
With the unit in Stop mode, press the ANYKEY button.
Search Scene Navigation Time Navigation Marker
Contents Copy Specifications Contents MP3 JPEG(photo) HDD DVD Not supported Not supported
Rec. Mode Select Madia Disc Manager

supported supported

Press the buttons to select Disc Manager, then press the ENTER or button.

Disc Manager DVD-RAM(VR)

Disc Name Used Space Available Space Disc Protection Info 00 : 04 : : 08 SP

Not Protected

Delete All

Format

116 - English

Page 117

Disc Protection
Press the buttons to select Rename, then press the ENTER button. The Rename screen is displayed.

Rename DVD-RAM(VR)

Disc Protection allows you to protect your discs from being formatted or deleted due to unintended operations.

Search Scene Navigation

Time Navigation Marker Rec. Mode Select Madia Disc Manager
Disc Name Used Space 00 : 04 : : 03 SP
Press the buttons to select Save, then press the ENTER button. A disc name is given to the disc.

Press the buttons to select Finalize, then press the ENTER button. You will be prompted with the message Do you want to finalize disc?.

00 : 10 : : 06 SP

Do you want to finalize disc?

English - 121

Page 122
Unfinalizing a Disc (V/VR mode)
Press the buttons to select Yes, then press the ENTER button. The disc is unfinalized.
A DVD-RW can be finalized or unfinalized in Video mode.
Unfinalize DVD-RW(V) Additional recording, protection Operation Same as DVD-Video and deletion are possible. Mark Finalize DVD-Video(RW)
Search Scene Navigation Time Navigation Marker Select Madia Disc Manager
A DVD-RW can be finalized or unfinalized in VR mode.
Finalize Unfinalize DVD-RW(VR) Additional recording, deletion, editing, and protection are possible.
DVD-RW(VR:F) Additional recording, deletion, editing, and protection are impossible.
Disc Manager DVD-RW(VR:F)

00 : 00 : : 00 SP

Operation

Current Rec. Mode DVD-VR

unfinalize
Press the buttons to select Unfinalize, then press the ENTER button. You will be prompted with the message Do you want to unfinalize disc?.
Do you want to unfinalize disc?

Current Rec. Mode DVD-V

If you select Yes, you will be prompted again with the message Disc will be unfinalized. Do you want to continue?.
Disc will be unfinalized.
Do you want to continue? Yes No

122 - English

10-HR720-XAC_123-129_Reference

10:01 PM

Page 123

Troubleshooting

If your product malfunctions, go through the checkpoints below before contacting a Samsung authorized service center.
The input is displayed for a while when the power is turned on.

Checkpoint 1

The HDD & DVD RECORDER requires some time to initialize and the input will be displayed for approx. 10 seconds after it is turned on.
Cannot record TV programs.
Check whether the power cord is securely plugged into the power outlet. Did you set the HDD & DVD RECORDER channel settings correctly? Check the free space on your HDD/DVD-RAM/-RW/-R discs.

Checkpoint 2

Checkpoint 3
I pressed the REC button but there is no response.
Recording is possible for HDD/DVDRAM/DVD-RW/-R discs only. If a program is copy protected, it cannot be recorded.
Troubleshooting.123 Specifications.127

English - 125

Page 126

Remote Control Unit

The remote control doesn't work.

Other problems.

Point the remote control at the remote control sensor on your HDD & DVD RECORDER. Allow for proper distance. Remove obstacles between your HDD & DVD RECORDER and the remote control. Check whether the batteries are empty. Check for the TV/DVD selection button. Check whether TV control button is selected or not.
Read the table of contents and then find and read the section describing your problem, follow the instructions given. Plug your HDD &DVD RECORDER off and on. If the problem still persists, contact a nearby Samsung service center.
I forgot my password for parental supervision.
Press and hold the PLAY ( ) and STOP ( ) button on the front panel of the Recorder for more than 5 seconds with no disc in the unit. All settings including the password will revert to the factory settings. Do not use this unless absolutely necessary. (Note that this function is possible only when no disc is inserted.)
Is it possible to change a subtitle and an audio signal on a recorded disc?
A recorded disc is played with only the subtitle and the audio signal which were selected during recording.

126 - English

5/18/05

10:53 AM

Page 127

Specifications

Power requirements Power consumption General Weight Dimensions Operating temp. Other conditions Video (1,2) Audio(1,2) DV Input Receivable Channels
120V AC, 60Hz 44 Watts 9.27 lb (4.20 kg) 17in (43 cm) (W) x 10in (25.5 cm) (D) x 3.1in (7.9 cm) (H) +41F to +95F Keep level when operating. Less than 75% operating humidity 1.0 V p-p at 75 load, sync negative S-Video input (Y: 1.0Vp-p, C: 0.286Vp-p at 75 load) Max.Audio Input Level : 2Vrms IEEE 1394(4p) compatible jack Regular TV broadcasting: VHF (2~13), UHF (14~69) Cable TV broadcasting: 1~125 Analog output jacks 1, 2

Audio Output Video

Optical/Coaxial digital audio output Full scale Analog output level : 2Vrms Video output jack 1 S-Video output 1 (Y:1.0Vp-p, C:0.286Vp-p at 75 load) Component output 1 (Y: 1.0Vp-p, Pb: 0.70Vp-p, Pr: 0.70Vp-p at 75 load)