If an irregular disc (a disc with a special shape) is used, this DVD Recorder & VCR may be damaged.

Holding discs

Avoid touching the surface of a disc
where recording is performed.

DVD-RAM, DVDRW and DVDR

Clean with an optional DVD-RAM/PD
disc cleaner. Do not use cleaners or cloths for CDs to clean DVD-RAM/DVDRW/DVDR discs.

DVD-Video, CD

Wipe off dirt or contamination on the disc with a soft

cloth.

Handling Cautions
Before connecting other components to this recorder, be sure to turn them all off. Do not move the recorder while a disc is being played, or the disc may be scratched or broken, and the recorders internal parts may be damaged. Do not put a flower vase filled with water or any small metal objects on the recorder. Be careful not to put your hand into the disc tray. Do not place anything other than the disc in the disc tray.
Cautions on handling discs
Do not write on the printed side with a ball-point pen

or pencil.

Do not use record cleaning sprays or antistatic. Also,
do not use volatile chemicals, such as benzene or thinner. Do not apply labels or stickers to discs. (Do not use discs fixed with exposed tape adhesive or leftover peeled-off stickers.)

English - 3

Page 4
Do not use scratch-proof protectors or covers. Do not use discs printed with label printers available

on the market.

JPEG CD-R/-RW Only JPEG files with the ".jpg", ".JPG" extension can be
Do not load warped or cracked discs.

Disc Storage

Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment. Do not keep under direct sunlight. Keep in a cool ventilated area. Store vertically. Keep in a clean protection jacket. If you move your DVD Recorder & VCR suddenly from a cold place to a warm place, condensation may generate on the operating parts and lens and cause abnormal disc playback. In this case, do not connect the plug to the power outlet and wait for two hours. Then insert the disc and try to play back again. It will work properly when condensation has evaporated.
The unit can handle a maximum of 1000 files and folders. Maximum size of progressive JPEG is 3M pixels. MOTION JPEG is not supported. DVD-RAM/RW/R discs that contain JPEG files can be

played back.

Using CD-R/-RW Use a 700MB(80 minutes) CD-R/-RW disc.
If possible, do not use a 800MB(90 minutes) or above disc, as the disc may not play back. If the CD-R/-RW disc was not recorded as a closed session, you may experience a delay in the early play-back time, and all recorded files may not play. Some CD-R/-RW discs may not be playable with this unit, depending on the device which was used to burn them. For contents recorded on CD-R/-RW media from CDs for your personal use, playability may vary depending on contents and discs.

Disc compatibility A 8X speed DVD+RW or above disc can be played, but

can not be recorded.

Not all brands of discs will be compatible with this unit. The latest firmware upgrade to improve recording &
playback quality can be downloaded from our web site. (Download Center at www.samsung.com) If disc compatibility problems continue, or there is an issue upgrading your recorder, contact the Call Center at 1-800-SAMSUNG.

English - 5

2006.2.28

5:37 PM

Page 6

Contents

Warning.2 Precaution.3 Important Safety Instructions.3 Handling Cautions.3 Maintenance of Cabinet.3 Disc Handling.3 Disc Storage.4 Disc Specifications.4 General Features.8 Before Reading the Users Manual.8 How to use the DVD Recorder & VCR.9 Description.11 Front Panel.11 Front Panel Display.11 Rear Panel.12 Unpacking.12 Accessories.12 Tour of the Remote Control.13
Step 3 : Connecting the Audio Cable.21 Connecting to your TV.21
Connecting to a stereo amplifier with analog input jacks.22 Connecting to an AV amplifier with a digital input jack.23
Step 4 : Connecting External Devices.24
Connecting a VCR, Set-Top Box(STB) or DVD player to the AV 1 IN or S-VIDEO IN jacks.24 Connecting a Camcorder to the AV 2 IN jacks.25 Connecting a Camcorder to the DV IN jack.26 Step 5 : Connecting the Power Cord.27 Step 6 : Preparing the Remote Control.27 Setting the Remote Control.28

System Setup

On-Screen Menu Navigation.29 Auto Clock Set.30 Manual Clock Set.31 Channel Set.32 Auto Channel Memory.32 Channel Add/Delete.33 RF Output Channel.33 Setting Up the Language Options.34 Setting Up the Audio Options.35 Setting Up the Display(Video) Options.36 Setting Up the Parental Control.37 VCR Setting.38 Video Input.39 DVD EP Mode Time.40 Automatic Chapter Creator.40 Quick Recording.41
Connecting & Setting Up
Quick Overview.14 Step 1 : Connecting the Antenna Cable.15
Antenna + DVD Recorder & VCR + TV : No Cable box.15 Antenna + Cable box + DVD Recorder & VCR + TV : Cable box with many scrambled channels.16 Antenna + DVD Recorder & VCR + Cable box + TV : Cable box with a few scrambled channels.17

Note to CATV system installer : This reminder is to call CATV system installers attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable title as practical.

14 - English

Page 15
Step 1: Connecting the Antenna Cable
There are several ways to connect your DVD Recorder & VCR. Select the antenna connection that best suits you below.
Antenna + DVD Recorder & VCR + TV : No Cable box
You can record non-scrambled channels by selecting the channel on the DVD Recorder & VCR. Also use this method if you watch channels without cable box.
If you are using an off-air antenna that has 300ohm twin flat leads, use an external antenna connector (300-75 ohm adaptor : not supplied) to connect the antenna to the DVD Recorder & VCR.
If you have two separate antennas (one VHF and the other UHF), use a UHF/VHF combineradaptor (available at most electronics shops) to connect the antenna to the DVD Recorder & VCR.

English - 15

Page 16
Antenna + Cable box + DVD Recorder & VCR + TV : Cable box with many scrambled channels
You can record channels by selecting the channel on the cable box. You cannot record one channel while watching another channel. Be sure that the cable box is turned on.

16 - English

Page 17
Antenna + DVD Recorder & VCR + Cable box + TV : Cable box with a few scrambled channels
You can record non-scrambled channels by selecting the channel on the cable box. You cannot record scrambled channels that require a cable box.

English - 17

Page 18
There are several ways to connect your DVD Recorder & VCR. Select one of the video connections on the following pages. You must use one of the following audio/video connections on this unit.
Connecting to a Video input jack
Connect a video(yellow) cable between the VIDEO(yellow) OUT jack on DVD Recorder & VCR and VIDEO(yellow) IN jack on the TV (or AV amplifier).

Audio/Video Cable

Yellow

White AUDIO

You will enjoy regular quality images. Connect audio cables(white and red) between the AUDIO OUT jacks on the DVD Recorder & VCR and AUDIO IN jacks on TV(or AV amplifier). (See pages 21 ~ 23)

18 - English

Page 19
Connecting to an S-Video input jack
Connect an S-Video cable(not supplied) between the S-VIDEO OUT jack on DVD Recorder & VCR and S-VIDEO IN jack on your TV (or AV amplifier).

S-VIDEO

S-Video Cable (not supplied)
You will enjoy high quality images. S-Video separates the picture element into black and white (Y) and color (C) signals to present clearer images than regular video input mode. Connect audio cables(white and red) between the AUDIO OUT jacks on the DVD Recorder & VCR and AUDIO IN jacks on TV(or AV amplifier). (See pages 21 ~ 23)

No Disc Timer Rec. Setup Antenna/Cable TV Channel Add/Delete RF Output Channel : CH3 CH4 : Antenna
Press the buttons to select Language, then press the ENTER or button. Language setup menu will be displayed.
No Disc Timer Rec. Audio Subtitle Disc Menu : Original : Automatic : English

Language

On-Screen Menu : English MOVE ENTER RETURN EXIT
Press the buttons to select CH3 or CH4, then press the ENTER or button. The message "Please tune your TV to channel 3 (4)" will appear on the screen. Change your TV channel to CH3 or CH4 to match the RF Output Channel of the DVD Recorder & VCR.
Press the buttons to select the desired language option, press the ENTER or button.
No Disc Timer Rec. Setup Audio Subtitle : Original Original
: English Automatic Franais Disc Menu : English Deutsch On-Screen Menu : English Espaol Italiano Nederlands Korean
Setting Up the Language Options
If you set audio, subtitle, disc menu and on-screen menu language in advance, they will come up automatically every time you watch a movie. If the selected language is not recorded on the disc, the original pre-recorded language is selected.
Audio: For the disc audio language. Subtitle: For the disc subtitles. Disc Menu: For the disc menu contained on the disc. On-Screen Menu: For the on-screen menu of your DVD Recorder & VCR.
Press the buttons to select the desired language, then press the ENTER or button.
I Press the RETURN or button to return to the
previous menu. Press the MENU button to exit the menu. I The selected language will only appear if it is supported on the disc.

34 - English

Page 35
Setting Up the Audio Options
Allows you to setup the audio device and sound status settings depending on the audio system in use.

Digital Output

1. PCM : Converts to PCM(2CH) 48kHz audio. Select PCM when using the Analog Audio Outputs. 2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using the Digital Audio Outputs. Be sure to select the correct Digital Output or no audio will be heard.
With the unit in Stop mode/No Disc mode, press the MENU button. Press the buttons to select Setup, then press the ENTER or button.
1. Off : Doesnt output digital signal. 2. On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder. When DTS soundtrack is played, sound is not output from Analog Audio Output.
Press the buttons to select Audio, then press the ENTER or button. Audio setup menu will be displayed.
No Disc Timer Rec. Setup Digital Output DTS : PCM : Off

When a marker is cleared while DVD-RAM/ DVD-RW(VR mode) is playing, marker numbers will change. For example, if the 7th marker is cleared after ten markers are registered, the marker numbers after the eighth will automatically move ahead by one and the 8th marker becomes the 7th.

50 - English

Page 51
Playing back an Audio CD (CD-DA)
Each disc has a variety of menu functions available.
Buttons on the Remote Control used for CD playback
Playing an Audio CD (CD-DA)
Insert an Audio CD (CD-DA) into the disc tray. The Audio CD menu appears and the tracks (songs) are played automatically.
TRACK 1 No. MOVE Title TRACK 1

0:00:15

Music List 01/15 Length 00:03:50 00:04:00 00:03:49 00:03:47 00:04:29 00:03:44 00:03:44 EXIT

TRACK 1

TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 ENTER

PLAY MODE

Press the buttons to select the track (song) to start playback from, and then press the ENTER button. 1. l button: Returns to the beginning of the current track when pressed during playback. If pressed again, your DVD Recorder & VCR moves to and plays the previous track. If you press this button within three seconds after playback starts, the previous track will be played. If you press this button after three seconds, the current track will be replayed from the beginning. 2. l button: Plays the next track. 3. Press the ( /) button: Fast Play (X2, X4, X8) 4. I : Stops a track(song). 5. ll : Plays a track(song) or pauses playback. 6. : Selects a track (song). 7. , ENTER button: Plays the selected track (song). 8. ANYKEY : To display the play mode window. (Repeat or Play Option).
Audio CD(CD-DA) Screen Elements
Music List TRACK 1 No. MOVE Title TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 ENTER 01/15 Length 00:03:50 00:04:00 00:03:49 00:03:47 00:04:29 00:03:44 00:03:44 EXIT
1. Play mode icon. 2. Current track (song): Displays the number of the track currently being played. 3. Displays the current play index and total track number. 4. This shows the operating state of a disc and a playback time corresponding to a portion that is currently played. 5. Displays the track list (song list) and the playing time of each track. 6. Button display

English - 51

Page 52

Playing back an MP3 Disc

While a cassette is stopped, press the ANYKEY button.

Scan and Play 00:01:49

Press the buttons to select End Search, then press the ENTER button. The VCR will fast forward, searching for a blank position, and then automatically stop at that position. If the VCR reaches the end of the tape during end search, the tape will be ejected.

End Search 00:00:13

Forward / Reverse Intro Scan
Use scan and play when you dont know exactly where a program is located on a cassette tape.

English - 57

3:15 PM

Page 58

This section explains various DVD recording methods.

Before Recording

This unit can record on various types of discs. Before recording, read the following instructions and select the disc type according to your preference.

Recordable discs

This recorder can record on the following discs. DVD-RAM DVD-RW DVD-R DVD+RW DVD+R
DVDRWs and DVD-RAMs are rewritable. DVDRs are non-rewritable. Compatibility between Samsung and other manufacturer's Recorders.
Disc Types DVD-RAM Recording format VR Mode Recording Device Finalizing Additional Recording in Samsung Recorder Samsung X Recordable Recordable Other Company X Not recordable finalized Samsung Recordable not finalized finalized Not recordable Other Company not finalized Recordable finalized Not recordable Samsung not finalized Recordable Not recordable finalized Other Company not finalized Not recordable finalized Not recordable Samsung not finalized Recordable finalized Not recordable Other Company not finalized Not recordable Samsung Recordable X Not recordable in some cases Other Company X finalized Not recordable Samsung not finalized Recordable finalized Not recordable Other Company not finalized Not recordable in some cases

VR Mode

DVD Recording Before Recording...58 Recordable discs...58 Recording Formats...59 Recording Mode...59 Unrecordable video...59 Recording the Current Channel you are watching.60 Recording from External Devices..61 Recording through a DV Input jack..61 Making a One Touch Recording(OTR)..62 Making a Timer Recording..62 Editing the Scheduled Record List..64 Deleting a the Scheduled Record List..64

Basic VCR Recording
Before starting 1. Check TV channel and Antenna connections. 2. Check the remaining time on the tape. You can record a TV show in progress by inserting a blank tape and pressing the (REC) button. You can even add time in preset increments up to 4 hours by pressing the (REC) button repeatedly. Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small piece of tape. Warning: Do not cover this opening unless you are sure you want to record over the tape.
Press the button to select the number of the scheduled record list you want to delete, and then press the ENTER button. The Edit and Delete items are displayed.
01/01 03:05AM 05:05AM SP Edit 01/02 01:06AM 03:06AM SP Delete / : :
Insert a blank VHS tape into the VCR deck. Make sure the tape is long enough to record the entire program. Press the Number buttons or the CH/TRK ( / ) buttons to select the desired channel. Press the INPUT SEL. button to select AV 1, AV 2 or DV if recording from an external device connected to the input jacks of the recorder.
Press the button to select Delete, then press the ENTER or button. You will be prompted with the delete confirm message such as Do you want to delete No.01?.
DVD-Recorder DVD-Recorder
DVD-RAM(VR) DVD-RAM(VR) No. No.
Scheduled Record List Current Time 12:27 AM Current Time 12:27 AM Date Start Date Start No. 01 End Mode Edit End Mode Edit

DVD DVD DVD DVD

Source Source
CH06 01/01 03:05AM 05:05AM SP CH06 01/01 03:05AM 05:05AM SP CH06 01/02 01:06AM 03:06AM SP CH06 01/01 01:06AM 03:06AM SP Do / to N0.01? you want :delete:: / :
Press the REC SPEED button on the remote control to set the Record Speed to one of the following options: SP Standard Play, for best picture quality. SLP Super Long Play, for maximum recording time (3 times SP).
The selected Record Speed will appear on the front panel and on-screen displays.
Press the buttons to select Yes, then press the ENTER button. The selected title will be deleted from the list.
Maximum Recording Time - SP vs. SLP
Tape Length T-120 SP (Standard Play) Approx. 2 hrs Approx. 2hrs 40 mins Approx. 3 hrs SLP (Super Long Play) Approx. 6 hrs Approx. 8 hrs Approx.9 hrs

T-160 T-180

You can not delete programs that are currently being recorded.

00:01:07 VCR-->DVD RPS Copy All MOVE ENTER RETURN EXIT
00:01:07 FF Copy All MOVE ENTER RETURN EXIT
The VCR will fast forward, searching for a start position and then automatically start a copy. The Start and End points may not match up exactly. If you want to copy all content, select Copy All.

Direct copy VCR to DVD

Insert the VHS tape you want to copy. Insert a recordable DVD disc. Press DVD copy button on front panel or remote control(TO DVD). To stop recording press the STOP button.

68 - English

Page 69

Playing the Title List

This section introduces basic functions of DVD editing and explains both edit functions for the recording on a disc and edit functions for the entire disc. Follow these instructions to play back a scene from the Title List.
Using the TITLE LIST button
Press the TITLE LIST button. The Title List screen is displayed.
DVD-RAM(VR) JAN/01/2006 No. Title 12:00 12:30 01:00 01:JAN/01/JAN/01/JAN/01/JAN/01/2006 00:00:11 00:00:09 00:01:36 00:00:11 Title List 1/4 Length Edit
JAN/01/2006 12:00 AM CH1 JAN/01/2006 SP
Playing the Title List..69 Basic Editing (Title List)...71 Renaming(Labeling) a Title..71 Locking(Protecting) a Title...72 Deleting a Title...73 Deleting a Section of a Title..73 Editing a Chapter...75 Dividing a Title...77 Advanced Editing (Playlist)..78 Creating a playlist...78 Playing Titles in the Playlist..79 Renaming a Playlist Title..79 Editing a Scene for the Playlist..80 Copying a Playlist Title to the VCR..83 Deleting a Playlist Title from the Playlist..84 Disc Manager..84 Editing the Disc Name...84 Disc Protection...85 Formatting a Disc..86 Finalizing a disc...86 Unfinalizing a disc (V/VR mode)..87 Delete All Title Lists...88 Edit Compatible...89
Press the buttons to select a title you want to play from Title List, and then press the PLAY button. The selected title will be played back. To stop title play, press the STOP button. To return the title list screen, press the TITLE LIST button.

Using the MENU button

DVD-RAM(VR) Title List Playlist Disc Manager Timer Rec. Setup Copy MOVE ENTER RETURN Title List

Title List

English - 69

12:0 PM

Page 70
Press the buttons to select Title List, then press the ENTER or button twice.
Title List Screen Elements
DVD-RAM(VR) JAN/01/2006 No.
The Title List screen is displayed.
JAN/01/2006 01:00 AM CH1 JAN/01/2006 XP

DVD-Recorder Title List

DVD-RW(VR) Title 12:00 12:30 01:00 01:JAN/01/JAN/01/JAN/01/JAN/01/2006 00:00:11 00:00:09 00:01:36 00:00:11 1/4 JAN/0

1/4 Length Edit

Length Edit Title No.
JAN/01/2006 12:00 00:00:JAN/01/2006 12:30 00:00:JAN/01/2006 01:00 00:01:JAN/01/2006 01:30 00:00:11 04

Rename Delete Edit

JAN/01/2006 12:00 AM CH1 JAN/01/2006
Protection ENTER EXIT EXIT

MOVE RETURN

Press the buttons to select a Title, then press the ENTER or button. The Edit menu is displayed:Play, Rename, Delete, Edit, Protection(See pages 71~74)
DVD-RAM(VR) JAN/01/2006 No. Title 01 JAN/01/JAN/01/JAN/01/JAN/01/2006 12:00 00:00:11 12:30 00:00:09 Play 01:00 00:01:36 Rename 01:30 00:00:11 Delete Edit Protection ENTER RETURN EXIT Title List 3/4 Length Edit
! Playback screen for recorded titles. @ Information window for the selected title: Title name, recording date, lock status, recording mode # Recorded title No. $ Recorded title name % Recording Length (i.e., the playing time) ^ Edit menu Play: Plays the selected title. Rename: Changes the name of a selected title. Delete: Deletes the selected title from the list. Edit: Deletes a section of title. Protection: Locks or unlocks the selected title. & Button display This may depend on the disc type.
JAN/01/2006 01:00 AM CH1 JAN/01/2006 XP
Press the buttons to select Play to play the title list, then press the ENTER button. The selected title will be played back.

RAM VR

DVD-RW(V)/DVD+RW/R has limited editing function.

Free Space Function

This function is only available with DVD+RW discs. If existing titles are deleted, new free space will be created. When you operate free space function, on-air TV images will appear on the left side of the title list.

Chapter : 1/3 Show

00:00:00 Add MOVE Delete Hidden Delete All RETURN Return EXIT
1. Current chapter number and status 2. Playback bar 3. Playtime 4. Chapter Edit menu

Adding a chapter

Press the buttons to select a title containing a chapter you want to edit, then press the ENTER or button.
DVD+RW JAN/01/2006 No. Title Title List 3/4 Length Edit Play 01 JAN/01/2006 12:00 00:04:48 Rename 02 JAN/01/2006 12:30 00:01:JAN/01/2006 01:00 00:49:57 Delete 04 Free Space 01:13:08 Protection Chapter Edit Divide Title
Select the point where you want to add a chapter using the playback related buttons, then press the ENTER button at that point. Each time you press the ENTER button, a new chapter will be added.

Chapter : 1/2 Show

00:10:10 Delete Hidden Delete All RETURN Return EXIT

Add MOVE

Playback related buttons: (II,I,I, , ).
Press the buttons to select Chapter Edit, then press the ENTER or button. The Chapter Edit screen is displayed.
Press the buttons to select Return, and then press the ENTER button. The edited title will now have the chapter you added.
DVD+RW JAN/01/2006 No. Title Title List 3/4 Length Edit 01 JAN/01/2006 12:00 00:04:JAN/01/2006 12:30 00:01:JAN/01/2006 01:00 00:49:Free Space 01:13:08

Chapter : 1/1 Show

You can make up to 99 chapters in a title and 254 chapters in a disc. The edited chapters are shown on existing DVD players only after performing the Edit Compatible function. (See page 89) If you add a chapter, the title is divided at that point; If you add a chapter onto a title that has only one chapter, it creates another chapter.

English - 75

Page 76

Deleting a chapter

Follow steps 1 to 3 in page 75
Press the buttons to select Hidden, and then press the ENTER button. The selected chapter is hidden.
Select a chapter you want to delete using the playback related buttons.
DVD+RW Chapter Edit Chapter : 2/4 Hidden
00:15:00 Hidden Delete All RETURN Return EXIT
Add MOVE Chapter : 2/4 Show
To finish the operation, select Return using the buttons then press the ENTER button.
Press the buttons to select Delete, and then press the ENTER button. The selected chapter will be deleted.
If there is only one chapter, it cant be hidden. Hidden/Show menu is not available if there is one chapter in the selected title. The hidden chapters are not shown on the existing DVD players. Hidden menu is changed to Show with a chapter playing back. You can make the hidden chapter shown by pressing the ENTER button at Show menu.

Chapter : 2/3 Show

Deleting all chapters
First chapter cant be deleted. Delete menu is not available if there is one chapter in the selected title. When deleting a chapter, only the chapter marker is actually deleted, not the recorded video. Deleting a chapter can't be canceled.
Press the buttons to select Delete All, and then press the ENTER button.
Do you want to delete all chapter marks? Yes Add MOVE Delete Hidden No Delete All RETURN

00:00:00 Return EXIT

Hiding a chapter
Select a chapter you want to hide using the playback related buttons.
Press the buttons to select Yes, and then press the ENTER button.

Chapter : 2/4 Show

When deleting a chapter, only the chapter marker is actually deleted, not the recorded video. Delete All menu is not available if there is one chapter in the selected title.

76 - English

Page 77

Dividing a Title

Follow these instructions to divide a long title into several titles.
Select the point you want to divide using the playback related buttons, then press the ENTER button.

DVD+RW Divide Title

Title List No. 03 Start End

00:00:00

00:00:00 00:010:10 Return

Divide ENTER RETURN

Playback related buttons: (II,I , ,).
Press the buttons to select Divide, then press the ENTER button.
Title List No. 03 Start End ENTER RETURN EXIT Do you want to divide title? (Once divided, titles cannot be merged back.) 00:00:00 Yes No 00:010:10 Point Divide ENTER RETURN Return EXIT
Press the buttons to select a title you want to divide from the Title List, then press the ENTER or button.
Press the buttons to select Yes, then press the ENTER button. The selected title has been divided into two titles.
DVD+RW JAN/01/2006 No. Title 12:00 12:30 01:00 01:30 Title List 1/5 Length Edit 00:04:48 00:01:47 00:19:25 00:30:32 01:13:08
Press the buttons to select Divide Title, then press the ENTER or button. The Divide Title List screen is displayed.
01 JAN/01/JAN/01/JAN/01/JAN/01/Free Space
If the point length to be divided is less than 5 seconds, you will be prompted with the message 'The range is too short.'. Press the MENU button after the operation has finished. The Title List screen will disappear.

00:00:00 00:00:01

English - 77
00995A(01)-VR330_XAA-Eng2

2006.3.21

2:47 PM

Page 78

Advanced Editing (Playlist)

Creating a Playlist

Follow these instructions to create a new playlist title from a recorded title.
Press the ENTER button at the end point.

DVD-Recorder Edit Scene Playlist No. Play Modify 01 00:00:00:00:00:00:04 Move Add 04 00:00:00 Delete ENTER RETURN EXIT 3
Modify 01 00:00:00:00:00:00:04 Move Add 04 00:00:03 MOVE 05 00:00:11 ENTER 06 00:00:04 RETURN Delete EXIT
DVD-RAM(VR) Scene No. 3/3
Press the buttons to select Move, then press the ENTER button.
DVD-Recorder DVD-RAM(VR) Scene No. 1/7 Edit Scene Playlist No. Play Modify 01 00:00:00:00:00:00:04 Move Add 04 00:00:03 MOVE 05 00:00:11 ENTER 06 00:00:04 RETURN Delete EXIT 3
Press the buttons to select Add, then press the ENTER button. The Add Scene screen is displayed.
DVD-RAM(VR) Scene No. 001 Start End Add Scene
A yellow selection window is displayed on the scene to be moved.

Add ENTER RETURN

Press the buttons to select the position to which you want to move the selected scene, then select the ENTER button.
DVD-Recorder DVD-RAM(VR) Scene No. 2/7 Edit Scene
Press the ENTER button at the starting point of the scene.
Add Scene DVD-RAM(VR) Scene No. 001 Start End

Playlist No. Play Modify

01 00:00:03

02 00:00:42

03 00:00:04
Move Add Title List : 1/31

04 00:00:03

05 00:00:11 ENTER

06 00:00:04 RETURN

The selected scene is moved to the selected position.
The image and starting point time are displayed in the Start window. Select the end point of the section where you want to add the new scene using the playback related buttons (II,I ,I, ,).
Depending on the kind of disc, the displayed screen may have a slight difference.

82 - English

Page 83
Copying a Playlist Title to the VCR
DVD-RAM(VR) No. Title Length Edit 01 JAN/01/2006 12:00 00:00:JAN/01/2006 12:30 00:00:Dolphin 00:01:36

00:00:03 00:00:03

The image and time of the end point are displayed in the End window. To cancel, press the buttons to select cancel and then press the ENTER button.
Press the buttons to select Add, then press the ENTER button.

Disc Name Disc Format Disc Unfinalize

: : DVD-VR

Disc Manager Timer Rec.
If you select Yes, you will be prompted again with the message 'Disc will be finalized. Do you want to continue?'
DVD-Video(RW) Title Menu Disc Menu Disc Manager Timer Rec. Disc Format Disc Unfinalize

: DVD-V

: DVD-VR Disc will Disc Manager Disc Format be finalized. DiscDo you want to continue? Finalize Timer Rec. Delete YesTitle Lists No All Setup Copy MOVE ENTER RETURN
Setup Copy EXIT MOVE ENTER RETURN EXIT

English - 87

Page 88
Press the button to select Disc Unfinalize, then press the ENTER or button. You will be prompted with the message 'Do you want to unfinalize disc?'.
DVD-RW(VR:F) Title List Playlist Disc Name Disc Format :
DVD-RAM(VR) Title List Playlist Disc Manager Title List

: DVD-VR

Disc Manager Disc Unfinalize Do you want to unfinalize disc? Timer Rec. Setup Copy MOVE ENTER RETURN Yes No

Timer Rec. Setup Copy

If you select Yes, you will be prompted again with the message 'Disc will be unfinalized. Do you want to continue?'
DVD-RAM(VR) Title List Playlist Disc Manager Timer Rec. Disc Name Disc Protection Disc Format : : Not Protected :
Unfinalize Disc Manager DiscDisc will be unfinalized. Do you want to continue? Timer Rec. Setup Copy MOVE ENTER RETURN Yes No
Press the buttons to select Yes, then press the ENTER button. The disc is unfinalized.
Press the button to select Delete All Title Lists, then press the ENTER or button.
DVD-RAM(VR) Title List Playlist Disc Name Disc Protection : : Not Protected :
A DVD-RW can be finalized or unfinalized in Video mode.
Finalize DVD-Video(RW) Unfinalize DVD-RW(V) Additional recording, protection and deletion are possible.
Operation Same as DVD-Video
A DVD-RW can be finalized or unfinalized in VR mode.
Finalize Mark DVD-RW(VR:F) Additional recording, deletion, editing, and protection are impossible. Unfinalize
You will be prompted with the confirmation message 'Do you want to delete all title lists?'.
DVD-RW(VR) Additional recording, deletion, editing, and protection are possible.

Operation

: Disc Manager Disc Formatto delete all title lists? Do you want Delete All Title Lists Timer Rec. Yes No Setup Copy MOVE ENTER RETURN

88 - English

Page 89
When Protected Title exists: The Delete All Title List function will not operate. If there is a title containing a still picture, however, that function will not operate. If you want to delete a protected title, disable Protect for it on the Lock item.
Press the buttons to select Edit Compatible, then press the ENTER or button.
DVD+RW Title List Disc Manager Timer Rec. Setup Disc Name Disc Format Edit Compatible :
Press the buttons to select Yes, then press the ENTER button. All title lists are deleted.