recorded.

Do not use record cleaning sprays or antistatic. Also, do
not use volatile chemicals, such as benzene or thinner.
Do not apply labels or stickers to discs. (Do not use
discs fixed with exposed tape adhesive or leftover peeled-off stickers.)
Plays CD-DA format audio CD-R and CD-RW discs. The unit may not be able to play some CD-R or
CD-RW discs due to the condition of the recording.
Do not use scratch-proof protectors or covers.

English - 4

CD-R/-RW
DVD-RW Disc Playback and Recording
Use a 700MB (80 minutes) CD-R/-RW disc. If possible,
do not use a 800MB (90 minutes) or above disc, as the disc may not play back.
Recording and playback can be performed on
DVD-RW discs in both the Video and VR Modes.
Once a DVD-RW recorded in both the Video and VR
Modes is finalised, you cannot perform additional recording.
If the CD-R/-RW disc was not recorded as a closed
session, you may experience a delay in the early playback time, all recorded files may not play.
Once a DVD-RW recorded in Video Mode is finalised, it

becomes DVD-Video.

Some CD-R/-RW discs may not be playable with this
unit, depending on the device which was used to burn them. For contents recorded on CD-R/-RW media from CDs for your personal use, playability may vary depending on contents and discs.
In both modes, playback can be performed before and
after finalisation, but additional recording, deleting and editing can not be performed after finalisation.
If you want to record the disc in VR Mode and then
record in V Mode, be sure to execute Format. Be careful when executing Format because all the recorded data may be lost.
DVD-R Disc Playback and Recording
Once a DVD-R recorded in Video Mode is finalised, it
A DVD-RW blank disc is initialised to VR Mode when

first initialised.

You can record onto the available space on the disc and
perform editing functions such as giving titles to discs and programmes and erasing programmes before finalising.
DVD-RAM Disc Playback and Recording
When programming is erased from a DVD-R, that space
does not become available. Once an area on a DVD-R is recorded on, that area is no longer available for recording, whether the recording is erased or not.
Ensure that the recording mode is set to VR mode.
Otherwise, this product will not be able to play the recording.
You cannot play a DVD-RAM in most DVD components

sub folders.

COPY PROTECTION

Using JPEG disc

CD-R/-RW, DVD-RAM/RW/R, HDD recorded with UDF,
ISO9660 or JOLIET format can be playbacked.
Many DVD discs are encoded with copy

protection.

Only JPEG files with the.jpg or.JPG extension can be

displayed.

This product incorporates copyright protection
technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorised by Macrovision Corporation, is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Each folder can have up to 500 items including files and
MOTION JPEG and progressive JPEG are not supported.

Using DivX disc

Disc : CD-R/-RW, DVD-RAM/RW/R, HDD Video File with following extensions can be played. :

.avi,.divx,.AVI,.DIVX

DivX Video (Codec) Format : DivX 3.11 DivX 4.x
DivX 5.x (without QPEL and GMC)
DivX Audio (Codec) Format : MP3, MPEG1 Audio Layer 2,

LPCM, AC3

Supported subtitle file formats:.smi,.srt,.sub,.psb,.txt,
Protection This HDD & DVD Recorder can allow you to protect the contents of your discs, as described below.ass
Programme-protected : See page 81 Locking

(Protecting) a Title

You cannot play back the disc that is larger than a 720 x

576 pixel resolution.

Disc-protected : See page 98 Disc Protection
DVD-RAM/RW/R discs that are incompatible with the DVD-VIDEO format cannot be played with this product.

English - 6

Do not use the following discs!
LD, CD-G, CD-I, CD-ROM and DVD-ROM discs should
not be used in this product. [Note] Disc types that can be played : CD/CD-R/-RW/MP3/ JPEG/DVD-Video/DVD-RAM/RW/R. For a DVD-RW/-R disc, which has been recorded in Video Mode on another component, it can play only when finalised.
Some commercial discs and DVD discs purchased
outside your region may not be playable with this product. When these discs are played, either No disc. or Please check the regional code of the disc. will be displayed.
If your DVD-RAM/RW/R discs is an illegal copy or is
not in DVD video format, it may also not be playable.

Disc compatibility

High Speed Recording discs can be used in this unit. Not all brands of discs will be compatible with this unit.

English - 7

Contents
Warning....2 Precaution....3 Important Safety Instructions...3 Handling Cautions...3 Maintenance of Cabinet..3 HDD (Hard Disk Drive)...3 Disc Handling....4 Disc Storage...4 Disc Specifications...4 Disc Copy...6 General Features...10 Before reading the instruction manual..11 How to use the HDD & DVD Recorder.11 Unpacking...13 Description....15 Front Panel....15 Rear Panel....16 Front Panel Display...16 Tour of the Remote Control..17

Copyright

2007 Samsung Electronics Co. All rights reserved; No part or whole of this instruction manual may be reproduced or copied without the prior written permission of Samsung Electronics Co.
S Z X C V K L B G A D J M N
How to use the HDD & DVD Recorder
Step 1 : Select the disc type or HDD
Please check available disc type before recording.
(DVD+RW/DVD+R discs can be played, but cannot be recorded.) If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a rewritable DVD-RW or DVD-RAM type disc. If you want to save a recording without any changes, choose a non-rewritable DVD-R. You can record files directly to the built-in HDD or edit a recorded file.
Step 2 : Format the disc to start recording
Unlike a VCR, the HDD & DVD Recorder starts formatting when an unused disc is inserted. This is required for the preparation of recording on a disc.

Using the HDD

Formatting unnecessary.

Using a DVD-RAM

This type of disc can be formatted in DVD-Video Recording format (VR mode). You can edit recorded images and create a playlist in a specific sequence according to your requirements.

Using a DVD-RW

This type of disc can be formatted in either DVD-Video format (V mode) or DVD-Video Recording format (VR mode). For an unused disc, a message that asks whether to initialise a disc or not. If you select DVD-VR or DVD-V, initialising will be started. You can play a Video mode disc on various DVD components. A VR mode disc allows more varied editing.
About the use of this instruction manual 1) Be sure to be familiar with Safety Instructions before using this product. (See pages 2~7) 2) If a problem occurs, check the Troubleshooting. (See pages 103~105)

English - 11

Using a DVD-R
Formatting disc is unnecessary and only V Mode Recording is supported. You can play these type of discs on various DVD components only when they have been finalised.
Step 5 : Editing a recorded disc

5. Playing time/clock/current status indicator. 6. Lights in the progressive scan mode. 7. Lights to indicate the timer record mode.

English - 16

Tour of the Remote Control
Your HDD & DVD Recorder remote control will work with Samsung televisions and compatible brands. 14. TITLE LIST/DISC MENU button Use this to enter the View Recording list/disc menu. 15. SUBTITLE/RED(A) button : When you use DTV, press this button to select the subtitle. Press this to switch DVDs subtitle language. 16. REC MODE/GREEN(B) button Use this to set the desired recording time and picture quality. (XP/SP/LP/EP). 17. GUIDE button Press this to switch programme guide. 18. REC button Use to make a recording on HDD/DVD-RAM/-RW/-R discs. 19. TV/RADIO/MARKER button In DTV mode, press this to switch TV or Radio mode. Use this to bookmark a position while playing a disc. 20. HDD button Press this to operate HDD. 21. INPUT SEL button Select input signal in external input mode (PROG, AV1, AV2 or DV input) 22. OPEN/CLOSE button To open and close the disc tray. 23. TV STANDBY/ON button 24. COPY Press this when you copy DVD to HDD and vice-versa. To start copying, press the COPY button on the title list screen or press the COPY button during the playback. 25. AUDIO button Use this to access various audio functions on a disc. (DVD mode) 26. PLAY/PAUSE button Press to play/pause a disc. 27. PROG button Use this to select a TV programme. 28. DTV/ANALOG button Select Digital/Analogue broadcasting. 29. RETURN button 30. EXIT button 31. PLAY LIST/TITLE MENU button Use this to return to the Title menu, or to view the recorded files list. 32. ALT/YELLOW(C) button When you use DTV, press this button to select the Audio track. 33. FAV LIST/BLUE(D) button When you use DTV, press this button to switch between favorit list. 34. TEXT button When you use DTV, press this button to select the Teletext OSD. 35. REC PAUSE/TIME SHIFT button Use this to pause during recording. In HDD mode, use this to operate Time shift function. 36. TIMER/REPEAT button Press to directly enter the Timer Recording Mode menu. Allows you to repeat a title, chapter, track or disc.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
DVD button Press this to operate DVD. TV button Press this to operate TV. STANDBY/ON button NUMBER buttons TV/DVD button (Not available) TV MUTE button In TV mode, this operates as sound mute. REVERSE/FORWARD SKIP buttons Press to skip backwards or forwards. STOP button Press to stop a disc. REVERSE/FORWARD SEARCH buttons Press to search a disc backwards or forwards. TV VOL button TV volume adjustment. MENU button Brings up the HDD & DVD Recorders setup menu. OK/DIRECTION buttons ( buttons) (INFO) button Press to display the programme information box in the screen when you use DTV. Allows access to common functions of the HDD & DVD Recorder. (See page 48.)

or Red White

Rear (L) Front(L) speaker Front(R) speaker Front (L) Subwoofer Centre

Rear (R)

Front (R)

English - 21

Connecting HDMI/DVI to a TV
If your TV has a HDMI/DVI input, connect HDMI/DVI Adapter cable to a TV. You will enjoy the best quality images and sounds.
Case 1 : Connecting to a TV with HDMI Jack Case 2 : Connecting to a TV with DVI Jack
Case 1 : Connecting to a TV with HDMI Jack
Using the HDMI cable connect the HDMI OUT jack on
the rear of the HDD & DVD Recorder to the HDMI IN jack of your TV.

White White Red

Press the input selector on your TV remote control until
the HDMI signal from the HDD & DVD Recorder appears on your TV screen.
M To use HDMI cable, make the Audio/Video
connection before plugging in the power cord or after finishing the Plug & Auto Setup. Do not connect the HDMI cable while the Plug & Auto Setup is progressing. HDMI is connected.
Progressive scan automatically activates when If your TV does not have Bitstream decoder, you
must set the digital audio output to PCM in order to watch through the HDMI output. (See pages 34~35)
Depending on the HDMI device (TV/HDMI
Receiver) you use, audio may not be supported. If TV/HDMI Receiver does not support Dolby digital, Audio output is not available when you set Digital output as Bitstream in Audio setup menu. In this case, set the digital audio output to PCM. If TV/ HDMI Receiver does not support DTS, Audio output is not available when you play disc in DTS format.
Case 2 : Connecting to a TV with DVI Jack
Using the DVI Adapter cable (not supplied), connect
the HDMI OUT jack on the rear of the HDD & DVD Recorder to the DVI IN jack of your TV.
You can switch from the HDMI output to other
output only in stop mode.
Using the audio cables, connect the AUDIO (red and
white) OUT jacks on the rear of the HDD & DVD Recorder to the AUDIO (red and white) IN jacks of your TV. Turn on the HDD & DVD Recorder and TV.
If you use an HDMI cable to connect a Samsung
TV to the HDD & DVD Recorder, you can operate the recorder using the TV remote control. (This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).) (See page 31)
the DVI signal from the HDD & DVD Recorder appears on your TV screen.

Please check the

To setup, follow steps 1~3 4. Press the buttons to select Time Zone, then press the OK or button. Select the time zone of your area using the buttons, then select OK using button.
GMT (Greenwich Mean Time) Table
Country GMT GMT+8 Australia GMT+9:30 GMT+10 WA NT, SA ACT, NSW, TAS, VIC City
Library Time Zone Time Zone

English - 26

Manual clock set
<MOVE sSELECT rRETURN eEXIT
To setup, follow steps 1~3 in page 26. 4. Press the buttons to select Manual Clock Set, then press the OK or button. Use the buttons to input Time, Date or Year. Use number buttons to input clock data directly. 5. Press the OK button, then the date and time will be saved. If you dont press the OK button, it will not be saved.

hr. min.

Monday
M The DVD Recorder automatically sets the clock according to the
time signal broadcast from Digital channel. If you get the exact time, please select Time Zone properly.

mMOVE sSELECT rRETURN

Channel | | | | |

Channel Set

This menu consist of 5 sub-menus (Digital Channel List, Digital Favorite Channel, Auto Setup, Digital Manual Setup, Analogue Manual Setup).
Digital Channel List Digital Favorite Channel Auto Setup Digital Manual Setup Analogue Manual Setup

Auto Setup

This function allows you to download of the channels automatically from the programmed load.
Auto Scanning Country Channel type Scan Mode Start frequency End frequency
Australia Digital : : All : CH5/177500KHz : CH69/8165000KHz

Cancel

1. Press the MENU button. 2. Press the buttons to select Channel, then press OK or button. 3. Press the buttons to select Auto Setup, then press OK or button. 4. Press the buttons to select desired options.

(Channel Type : Digital)

Channel type : Press the buttons to select Digital, Analogue or All.
(If you select Analogue, you can not select the Scan Mode, Start frequency and End frequency.)
Scan Mode : - Only Free : Receives signals except for the scrambled
signal. - All : Receives signals including the scrambled signal.

This function allows you to setup the system setting. 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Setup, then press the OK or button. 3. Press the buttons to select System, then press the OK or button. 4. Press the buttons to select the desired system option, then press the OK or button. 5. Press the buttons to select the desired item, then press the OK or button.

English - 29

Auto Power Off Chapter Creator EP Mode Time Anynet+ (HDMI CEC) EZ Record DivX(R) Registration
DVB-T Auto Subtitle : Off

sSELECT

rRETURN

Auto Power Off Setting

System | | | | | | |
This feature automatically turns off your HDD & DVD Recorder, if you do not press any button for the selected time. 1. Press the buttons to select Auto Power Off, then press the OK or button. 2. Press the buttons to select the desired item, then press the OK or button. Off : Auto power off is disabled. 2 Hours : HDD & DVD Recorder will automatically turn off for 2 hours after the last button is pressed. 6 Hours : HDD & DVD Recorder will automatically turn off for 6 hours after the last button is pressed. If the turn off time set with the Auto Power off function is reached during playback or recording, the device will operate until the playback or recording is finished.
Auto Power Off Off : Off Chapter Creator 2 Hours: Off EP Mode Time 6 Hours: 6 Hours Anynet+ (HDMI CEC) EZ Record DivX(R) Registration

: On : Off

M If you off and on the HDD & DVD Recorder, the option will be

returned to default.

Automatic Chapter Creator
Auto Power Off Chapter Creator Off EP Mode Time On Anynet+ (HDMI CEC) EZ Record DivX(R) Registration

(V-mode)

A DVD-Video consists of Titles and Chapters. When you record one programme, it makes one Title. If you use this function, the Title will be divided into Chapters. 1. Press the buttons to select Chapter Creator, then press the OK or button. 2. Press the buttons to select Off or On, then press the OK or button. Off : Select if you do not want use Automatic Chapter Creator. On : Select this option to use the Automatic Chapter Creator feature. Press the EXIT ( ) button to exit the menu. 3. Press the REC button to start recording. (See page 65 about how to set recording speed) The message Do you want to create the chapter menu after this recording? is displayed. 4. Press the buttons to select OK, then press the OK button. A new chapter is created according to the selected recording mode. A chapter will be about 5 minutes long in XP and SP, and about 15 minutes long in LP and EP mode. 5. Press the STOP button to stop recording. 6. To display the created titles, finalise the disc (See page 101) and then press the TITLE MENU button. The title menu will be displayed. 7. To display the created chapters, select the desired Title and then press the DISC MENU button. The chapter menu for the selected Title will be displayed.

sound or a loud noise.

MPEG-2 audio. LPCM sound track is always outputted as PCM. It has no relation with Digital Output setting.
Audio : PCM Off On : Off : On : On : Off | | | | |
Off : Doesnt output DTS signal. Select this when your AV receiver (or AV
amplifier) does not have DTS decoder.
Digital Output DTS DRC NICAM V-Mode Compatibility
On : Outputs DTS Bitstream via digital output when you play DTS track.
Select this only when your AV receiver (or AV amplifier) have DTS decoder.
M When DTS soundtrack is played, sound does not output from AV

Audio Output.

Audio : PCM : Off : On : On : Off | | | | |
This is only active when a Dolby Digital signal is detected.
Digital Output DTS DRC Off On V-Mode Compatibility NICAM
On : When Movie soundtracks are played at low volume or from smaller
speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.
Off : You can enjoy the movie with the standard Dynamic Range.
Digital Output DTS DRC NICAM Off V-Mode Compatibility On
NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound by setting NICAM on or off.
On : NICAM mode Off : Only set at this position to record the standard mono sound during
a NICAM broadcast if the stereo sound is distorted due to inferior reception conditions.

English - 34

V-Mode Compatibility
Audio : PCM : Off : On : On : Off On | | | | | |
Digital Output DTS DRC NICAM V-Mode Compatibility Off
This feature is about the setup for selecting audios when recording the Dual STEREO (Multi-audio) broadcasting on HDD. It does not affect to the direct DVD recording of a programme.
Off : Both Dual L and Dual R of the multi-audio broadcasting are
recorded on HDD. Titles recorded on HDD under such setup status cannot be copied to DVD-R or DVD-RW (V mode).
On : Either Dual L or Dual R of the multi-audio broadcasting is
recorded on HDD. Titles recorded on HDD under such setup status can be copied to DVD-R or DVD-RW (V mode) Dual L and Dual R options can be selected from Audio Selection.
Setting up the Video Options
This function allows you to setup the video setting. This function depends on disc type. It may not work for some disc types. 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Setup, then press the OK or button. 3. Press the buttons to select Video, then press the OK or button. Video setup menu will be displayed. 4. Press the buttons to select the desired video option, then press the OK or button. 5. Press the buttons to select the desired item, then press the OK or button.

Search w Title x Time <CHANGE
Info 1/3 00:00:37 sSELECT
M This may not work for some discs.
When an audio CD(CD-DA) or an MP3/JPEG disc is inserted, depending on the disc type, the information display may not appear.
The Time Search function does not operate in some discs. To make the screen disappear, press the RETURN button.
Selecting the Subtitle Language
DVD-VIDEO t Search O Subtitle Q Audio z Angle P Repeat v Zoom >MOVE Info | Off ENG Dolby Digital 5.1 CH 1/1 Off Off | <CHANGE
Selects one of the subtitle language recorded on the disc. You can also operate this function by pressing the SUBTITLE button on the remote control. 1. Press the INFO button during playback. 2. Press the buttons to select Subtitle. 3. Press the buttons to select the desired subtitle language.
M The subtitle display may be different depending on the disc type.
Some discs allow you to select the language for the disc menu only.

English - 48

Selecting the Soundtracks & Audio Channels

SZXCKLD

HDD t Search O Subtitle Q Audio P Repeat v Zoom >MOVE Info | None Dolby Digital 2/0 L+R Off Off | <CHANGE
Selects one of the soundtracks recorded on the disc. Also selects the audio channels from recorded TV programmes. You can also operate this function by pressing the AUDIO button on the remote control. 1. Press the INFO button during playback. 2. Press the buttons to select Audio. 3. Press the buttons to select the desired sound tracks or audio channel.
M Soundtracks or Audio channel may be different because they are
disc-specific. menu only.
Some discs allow you to select the audio language for the disc
Changing the Camera Angle
DVD-VIDEO t Search O Subtitle Q Audio z Angle P Repeat v Zoom >MOVE Info | ENG ENG Dolby Digital 5.1 CH 1/4 Off Off | <CHANGE
When a DVD VIDEO contains multiple angles of a particular scene, you can select the Angle function. 1. Press the INFO button during playback. 2. Press the buttons to select Angle. 3. Press the buttons to select the desired angle.
M This function is disc-dependent, and may not work on all DVDs.
with a multi-camera angle system.
This function does not work when a DVD has not been recorded Displays the current angle, total angle number.

English - 49

Repeat Play
Playing Repeatedly (Repeat Playback)
HDD t Search O Subtitle Q Audio P Repeat v Zoom <CHANGE Info | None Dolby Digital 2/0 L+R Off Off | sSELECT
You can also operate this function by pressing the REPEAT button on the remote control. 1. Press the INFO button during playback. 2. Press the buttons to select the Repeat. 3. Press the buttons to select Off, A-B or Title or Chapter you want to play repeatedly, then press the OK button.

1. Press the BLUE(D) button to select Contents. 2. Press the buttons to select the contents you want to move, then Press the OK or button.
M This function is possible only when the disc contains the selected

contents.

Audio CD(CD-DA) is not available.

English - 58

Viewing a Picture
CD Image 1.jpg Photo List 1/17
1. Insert a JPEG disc into the disc tray.

Image 1.jpg

Image 10.jpg

Image 11.jpg

The menu is displayed
Image 13.jpg Image 14.jpg Image 15.jpg Image 16.jpg

Slideshow

2. Press the buttons to select Library, then press the OK or button. 3. Press the buttons to select Photo, then press the OK or button. To see the next 8 pictures, press the SKIP ( ) button. To see the previous 8 pictures, press the SKIP ( ) button. 4. Press the buttons to select a desired picture, then press the OK button.

Slide Show

Image 1.jpg 1/17
5. Press the PLAY ( )button. Once in the Photo List, you can also operate slideshow in by pressing the YELLOW(C) button. 6. Press the RED(A) button to select Speed. 7. Press the buttons to select the slideshow speed, then press the OK or button. The slideshow starts and plays at the selected speed.

Rotate

>PHOTO SLIDE SHOW

rRETURN eEXIT

You can go to Photo List by pressing YELLOW(C) button.

To stop the Slide Show

Fast Normal Slow Speed

>PHOTO

Press the GREEN(B), STOP(

Slideshow Off

SLIDE SHOW

) or RETURN button.

Photo List
To setup, follow steps 1 to 4.
5-1. Press the GREEN(B) button to select Rotate. 6. Press the buttons to select the rotate angle, then press the OK or button.
Off Rotate 90 Rotate 180 Rotate 270 Rotate
Once you select a rotate angle, you can change it by pressing the

RED(A) button.

To stop the Rotate
Press the GREEN(B), STOP( ) or RETURN button.

Rotate Off

English - 59
To setup, follow steps 1 to 4 in page 59. 5-1. Press the YELLOW(C) button to select Zoom. 6. Each time the OK button is pressed, the picture is enlarged up to 4x (four times the normal size). X2 X4 X2 Normal

To stop the Zoom

Go To Photo List
To setup, follow steps 1 to 4 in page 59. 5-1. Press the RETURN button to go to Photo List.
When you need to change the Sort order of Photo List, you can change it simply. 1. While the list menu is displayed, press the GREEN(B) button to select Sort. 2. Press the buttons to select the desired item, then press the OK or button.
Name Image 13.jpg Size Image 14.jpg Image 15.jpg Image 16.jpg
Name : In alphabetical order Size : In order of photo file size.
M You can sort by Name, Size. Sorted list will be resorted in copied
order upon reentering Photo List.

13:25:04 14:02:28

Time Shift Screen Elements
1. 2. 3. 4. 5. 6. 7. Displays the current media. Displays the current status. Watching Point. Current play time. Live Point. Live Time. Time Shift Time Bar

HDD Play

13:25:04

14:02:28

Buttons on the Remote Control used for Time Shift function

1. 2. 3. 4.

PLAY/PAUSE ( ) button : Pause live TV and resumes playback. SEARCH ( ) buttons : Fast play ( X 2, X 4, X 8, X 16, X 32, X 128) SKIP ( ) button, STOP ( ) button : Switches to live TV. SKIP ( ) button : Returns to the point where Time Shift begines.
M The Time Shift is available only when HDD mode is selected.
You can use this function for up to maximum two hours.

Shift is set to On.

You can only play the contents by using the menu when the Time Press TIME SHIFT button to cancel the Time shift function.

English - 72

Making a Timer Recording
1. Check the antenna cable is connected. 2. Check the remaining time of the disc. 3. Check the date and time are correct.
Make sure the Clock (Setup-Clock Set) must be set before you proceed with a timer recording. (See pages 26~27)

N Using the TIMER button

Timer Record | | | |
1. With the unit in Stop mode, press the TIMER button. 2. Press the OK or button to select Scheduled List. 3. Press the OK button to select Add a list. 4. Set timer recording option.
G-Code Scheduled List G-Code Extened : Off Recorded List
Fill the input items using the buttons and number buttons.
: Moves to the previous/next item. , 0~9 : Sets a value.
No. To Source Date Add a list Start
Scheduled List Current Time 12:00

End Mode

To : Select the media to record HDD or DVD. Source : The video input source (AV1, AV2), or the broadcasting
channel you want to make a timer recording from. To convert DTV/Analogue, press DTV/ANALOG button of the remote control. On the DTV mode, you can change TV or RADIO by pressing the TV/ RADIO button on the remote control.
Recordable Time HDD 69:30 SP sSELECT

Recorded List

No. To To HDD Source Source AV 1 Date Date JAN 01 Start Start 12:00
End End 14:00 Mode Mode SP
Date : Timer Recording allows setting the recording time within one
month period. Set the recording day. (month/day)

No.01 No Title

Recordable Time HDD 69:30 SP Recordable Time HDD 69:30 SP <MOVE sSELECT

Title sSave

JAN 31 JAN 30 JAN 29 JAN 02 JAN 01
Every SUN Every SAT MON-FRI MON-SAT Every Day
Start/End Time : Start and end time of the timer recording. Mode (Recording Mode) :
- FR (Flexible Recording) : Select when you want to set video quality automatically. In FR mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc and length of the timer recording. This function is selected only one mode in XP, SP, LP and EP modes. - XP (high quality) : Select when video quality is important. - SP (standard quality) : Select to record in standard quality. - LP (low quality) : Select when a long recording time is required. - EP (extended) : Select when a longer recording time is required. - The dual layer DVD-Rs have approximately double the capacity of single layer DVD-Rs. (See page 43)

No. To Source No. 01 No Title To Source
Date Start Add a list Start End End Mode

HDD PR 01 JAN : : 30

Recordable Time HDD 108:14 SP Recordable Time HDD 65:19 XP
Title s Save Recorded List

Adding a Scheduled List

Follow these directions to add an entry from the Scheduled List.
1. With the unit in Stop mode, press the TIMER button. 2. Press the OK or button to select Scheduled List. 3. Press the buttons to select the number of the Scheduled List, then press the RED(A) button.
Set the items you want to add. See the Making a Timer Recording
section for more information on Timer Recording Input items. (See pages 73~74) 4. Press the OK button to confirm the added setting. 5. Press the EXIT ( ) button after finishing the operation. The Scheduled List screen will disappear.
No. -To --HDD HDD HDD HDD Source ---PR 01 PR 01 PR 01 PR 01 Date ---JAN 01 JAN 01 JAN 01 JAN 02
Start --:-17:30 21:00 23:15 17:30 End --:-18:30 22:00 23:45 18:30 Mode -SP SP SP SP

English - 75

Deleting a Scheduled List
Follow these directions to delete an entry from the Scheduled List.
1. With the unit in Stop mode, press the TIMER button.
Date ---JAN 01 JAN 01 JAN 01 Start --:-17:30 21:00 23:15 End --:-18:30 22:00 23:45 Mode -SP SP SP
No. -03 To --HDD HDD HDD Source ---PR 01 PR 01 PR 01
2. Press the OK or button to select Scheduled List. 3. Press the buttons to select the number of the Scheduled List you want to delete, and then press the GREEN(B) button.
You will be prompted with the delete confirm message such as Do
you want to delete?. 4. Press the buttons to select Yes, then press the OK button.

Mode -On On On

The selected entry will be deleted from the list.
5. Press the EXIT ( ) button after finishing the operation. The Scheduled List screen will disappear.
No. To Source Date Start End -- No. 01 ------- ---:---:--01 HDD PR 01 JAN 01 17:30 18:30 SP 02 HDD PR 01 Do you want to delete? SP JAN 01 21:00 22:HDD PR 01 JAN 01 23:15 23:45 SP

English - 76

Using the G-Code Feature
Before presetting your HDD & DVD Recorder. Switch on both the television and your HDD & DVD Recorder. Check that the date and time are correct. Up to twelve programmes can be preset 1. With the unit in Stop mode, press the MENU button.
HDD & DVD RECORDER HDD Library Guide Channel Timer Record Disc Manager Setup Enter G-Code number. [0-9]

G-Code

forward (to the right).

English - 80

HDD Sports(A1)

Rename
Clear (YELLOW(C) button) : Deletes all the character inputs. Save (BLUE(D) button) : Registers the character inputs.
5. Press the BLUE(D) button to select Save. The changed title name is displayed on the title item of the selected entry.

Back Space

Locking (Protecting) a Title
Follow these instructions to lock an entry to protect it from accidental deletion.
1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. 2. Press the buttons to select an entry you want to protect from the Title List, then press the MARKER button until a checkmark appears. Repeat this step to select an additional title you want to protect.
If you dont want to protect a certain one of the checked entries,
simply select that entry and press the MARKER to deselect it until a checkmark disappears. 3. Press the RED(A) button to select Edit. Edit menu is displayed. 4. Press the buttons to select Protection, then press the OK or button.
HDD JAN/02/2007 21:00 PR1

Title List 2/3

Delete Copy Protection 3 MPEG2 New Playlist 4 JAN/02/2007 21:00 SelectSP 1 All V-Mode All Unselect Compatibility Edit Sort
002 JAN/02/2007 21:00 PR 01:00:JAN/03/2007 23:15 PR 00:30:00
HDD JAN/02/2007 21:00 PR1 No. Protection

Title Length

5. Press the buttons to select On, then press the OK button. The key icon on the information window for the selected entry changes to the locked status. (1 0) 6. If you want to cancel the Protection, select Off in step 5 and press the OK button. The key icon changes to the unlocked status. (0 1)

001JAN/01/2007 17:30 PR

2 items 01:00:00 are selected 002JAN/02/2007 21:00 Set title Protection mode: PR
3 MPEGSP V-Mode Compatibility 01:00:00 003JAN/03/2007 23:15 PR Off 00:30:00

On 4 JAN/02/2007 21:00

M If you select Select All in the Edit menu, all title will be checked.

English - 81

Deleting a Title
Follow these instructions to delete an entry from the Title List.
3 MPEGJAN//01/2007 17:SP V-Mode Compatibility
1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. 2. Press the buttons to select an entry you want to delete in the Title List, then press the MARKER button until a checkmark appears. Repeat this step to select an additional title you want to delete.
Delete Copy Protection 3 MPEG2 New Playlist 4 JAN/02/2007 21:00 SelectSP 1 All Unselect Compatibility V-Mode All Edit Sort
If you dont want to delete a certain one of the checked entries,
simply select that entry and press the MARKER to deselect it until a checkmark disappears. 3. Press the RED(A) button to select Edit. Edit menu is displayed. 4. Press the buttons to select Delete, then press the OK or button.
No. Title 001JAN/01/2007 17:30 PR

Audio CD

An audio disc on which 44.1kHz PCM Audio is recorded. Plays CD-DA format audio CD-R and CD-RW discs. This
unit may not be able to play some CD-R or CD-RW discs due to the condition of the recording.

CD-R/-RW

MP3 CD-R/-RW Only CD-R discs with MP3 files recorded with
ISO9660 or JOLIET format can be played back
Only MP3 files with the "mp3" or "MP3" extension can

be used.

DVD-RW Disc Playback and Recording
Recording and playback can be performed on DVDRW discs in both Video and VR Modes.
For MP3 files recorded with a VBR(Variable Bit
Rates), from 80 Kbps to 320 Kbps, the sound may cut in out. Playable bitrate range is from 56Kbps to 320Kbps. The unit can handle a maximum of 1000 files and folders. DVD-RAM/RW/R discs that contain MP3 files can be played back.
Once a DVD-RW recorded in VR Mode or Video mode
is finalized, you cannot perform additional recording.
Once a DVD-RW recorded in Video Mode is finalized,

it becomes DVD-Video.

4 - English
00995A(01)-VR330_XAA-Eng1

2006.3.20

5:39 PM

Page 5

In both modes, playback can be performed before and after
finalization, but additional recording, deleting and editing can not be performed after finalization. If you want to record the disc in VR Mode and then record in V Mode, be sure to execute format. Be careful when executing Format because all the recorded data may be lost. For an unused disc, a message that asks whether to initialize a disc or not. If you select Yes, disc will be formatted in VR mode.

COPY PROTECTION

Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD Recorder & VCR directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs. This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

DVD-RW (VR mode)

- This is a format that is used for recording data on DVD-RW disc. You can record multiple titles, edit, delete, partial delete, create a playlist, etc. - A disc that is recorded in this mode may not be played by existing DVD players.
DVD-RW (Video mode) - This is a format that is used for recording data on a
DVD-RW or DVD-R disc. The disc can be played by an existing DVD player once it has been finalized. - If a disc that has been recorded in Video mode by a different manufacturer's recorder but has not been finalized it cannot be played or additionally be recorded by this recorder.
Protection Program-protection: See page 72 Locking a Title Disc-protection: See page 85 Disc Protection
DVD-RAM/DVDRW/DVDR discs that are incompatible with the DVD-VIDEO format cannot be played with this product.
DVD+RW Disc Playback and Recording
With DVD+RW discs, there is no difference between
DVD-Video format (Video mode) and DVD-Video Recording format (VR mode). You can make your own chapters on DVD+RWs and edit them using the Chapter Edit menu. Finalizing is generally unnecessary when using a DVD+RW disc.
For more information on DVD recording compatibility,
consult your DVD-RAM/DVDRW/DVDR manufacturer.
Use of poor quality DVD-RAM/DVDRW/DVDR discs
may cause following unexpected problems including, without limitation, recording failure, loss of recorded or edited materials or damage to the recorder.
Do not use the following discs!
LD, CD-G, CD-I, CD-ROM and DVD-ROM discs should
not be used in this product. [Note] Some commercial discs and DVD discs purchased outside your region may not be playable with this product. When these discs are played, either No Disc or The disc cannot be played. Please check the regional code of the disc. will be displayed. If your DVD-RAM/DVDRW/DVDR disc is an illegal copy or is not in DVD video format, it may also not be playable.
DVD-RAM Disc Playback and Recording
For cartridge type DVD-RAM discs, remove the
cartridge and use the disc only.
Ensure that the recording mode is set to VR mode.
Otherwise, this product will not be able to play the recording. You cannot play a DVD-RAM in most DVD players due to compatibility issues. Only DVD-RAM standard Version 2.0 discs can be played in this unit. DVD-RAM recorded on this unit may not work with other DVD Players. To determine compatibility with these DVDRAM discs, refer to the users manual for the player.
Disc compatibility A 8X speed DVD+RW or above disc can be played, but

Before Reading the Users Manual
Make sure to check the following terms before reading the users manual.
Icons that will be used in manual Icon Term Definition This involves a function available in DVD or DVD-R/DVD-RW(V)/+R discs that have been recorded and finalized. This involves a function available in DVD-RAM. This involves a function available in DVD-RW. This involves a function available in DVD-R. This involves a function available in DVD+RW. This involves a function available in DVD+R. This involves a function available in a data CD (CD-R or CD-RW). This involves a function available in CD-R/-RW or DVDR/RW/ -RAM discs. This involves a function available in CD-R/-RW or DVDR/RW/ -RAM discs. This involves a case where a function does not operate or settings may be cancelled. This involves tips or instructions on the page that help each function operate.

RAM -RW -R +RW +R CD

Caution
One-Touch A function that can be operated button by using only one button. ANYKEY button A function that can be operated by using ANYKEY button.

Copyright

2006 Samsung Electronics Co. All rights reserved; No part or whole of this users manual may be reproduced or copied without the prior written permission of Samsung Electronics Co.
About the use of this users manual
1) Be sure to be familiar with Safety Instructions before using this product. (See pages 2~5) 2) If a problem occurs, check the Troubleshooting. (See pages 91~93)

8 - English

Page 9
How to use the DVD Recorder & VCR

Step 1

Select the disc type

Step 3

There are two different recording methods: Direct Recording and Timer Recording. Timer recording is classified as a Date : Once, Daily or Weekly. Recording mode : XP (high quality mode), SP (standard quality mode), LP (long recording mode), and EP (extended mode).
This unit can record on the following types of discs. If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a rewritable DVDRW or DVD-RAM type disc. If you want to save a recording without any changes, choose a non-rewritable DVDR.

Step 4

Playing

Step 2

Format the disc to start recording
Unlike a VCR, the recorder automatically starts formatting when an unused disc is inserted. This is required for the preparation of recording on a disc.
You can select the title you want to play in a displayed menu and then immediately start playback. A DVD consists of sections called titles, and sub sections called chapters. During recording, a title is created between two points where you start and stop recording. Chapters will be created automatically when you finalize recording on DVD-R / DVD-RW discs in Video mode. You can make your own chapters on DVD+RWs and edit them using the Chapter Edit menu. The chapters length (interval between chapters) varies according to the recording mode.

9. 10. 11. 12. 13. 14. 15.
P.SCAN BUTTON FRONT PANEL DISPLAY DVD/VCR SELECT BUTTON COPY BUTTON CHANNEL / BUTTONS RECORD BUTTON PLAY/STILL, REW/SKIP, F.F/SKIP, STOP BUTTONS

Front Panel Display

1. 2. 3. 4. 5. 6.
DVD is activated. DVD-RAM is activated. DVD()R or DVD()RW is actived. Progressive Scan mode is activated. Record function is activated. VCR is activated.
7. DVD or CD media is loaded. 8. The time, counter position or current deck status is indicated. 9. When you set a Timer recording, this indicator appears. 10. VHS videotape is loaded.

English - 11

6:37 PM

Page 12

Rear Panel
Fan The fan always revolves when the power is on. Ensure a minimum of 4 clear space on all sides of the fan when installing the product.

1. 2. 3. 4. 5.

VIDEO INPUT JACK (AV 1 IN) VIDEO OUT JACK (AV OUT) AUDIO OUT JACKS (COMPONENT OUT) S-VIDEO IN/OUT JACKS ANT IN JACK

6. 7. 8. 9. 10. 11.

ANT OUT (TO TV) JACK AUDIO INPUT JACKS (AV 1 IN) AUDIO OUT JACKS (AV OUT) DIGITAL AUDIO OUT JACK (OPTICAL) DIGITAL AUDIO OUT JACK (COAXIAL) VIDEO OUT JACKS (COMPONENT OUT)

Unpacking

Accessories
Check for the supplied accessories below.
Audio/Video Cable (AC39-00073A)
RF Cable for TV (AC39-42001J)
Remote Control (AK59-00053A)
Batteries for Remote Control (AAA Size) (AC43-12002H)
Users Manual (AK68-00995A)
Quick Guide (AK68-00997A)

12 - English

2:1 PM

Page 13

Tour of the Remote Control
1. DVD Button Press this when you use a DVD. 2. TV Button Press this to operate TV. 3. POWER Button 4. NUMBER Button 5. 100+ Button Press this to select channel 100 or higher. 6. F.ADV/SKIP Button 7. Playback-related Buttons Forward/Rewind, Search, Skip, Stop, Play/Pause 8. VOL (Volume) Button TV volume adjustment 9. MENU Button Press this to bring up the DVD Recorder & VCRs setup menu. 10. ENTER/DIRECTION Buttons (UP/DOWN or LEFT/RIGHT Buttons) This button functions as a toggle switch. 11. INFO Button Press this to display current setting or disc status. 12. TITLE LIST/DISC MENU Button Press this to enter the TITLE LIST/Disc menu.
13. SUBTITLE Button Press this to switch the DVDs subtitle language. 14. ANYKEY Button Press this to set the status of the disc that is being played. 15. REC Button Press this to make a recording on VCR, DVD-RAM/ RW/R discs. 16. TO DVD COPY Button Press this when you copy from the VCR to the DVD. 17. REC SPEED Button Press this to set the desired recording time and picture quality. 18. VCR Button Press this when you use a VCR. 19. INPUT SEL. Button Press this to select AV input signal in external input mode. (Tuner, AV input, DV input) 20. OPEN/CLOSE Button Press this to open and close the disc tray. 21. TV POWER Button 22. TV/VCR Button 23. MARKER Button Press this to bookmark or mark a position while playing a disc. 24. CH/TRK Button Press this to select a TV channel/Adjust tape tracking. 25. RETURN Button Returns to a previous menu. 26. AUDIO/TV MUTE Button Press this to access various audio functions. This operates as sound mute. (TV mode) 27. CANCEL Button 28. PLAY LIST/TITLE MENU Button Press this to enter the Edit playlist/Title menu. 29. ANGLE Button Press this to access various camera angles on a disc (if the disc contains multiple camera angles). 30. ZOOM Button Zooms in on screen. 31. TIMER REC Button Press this when you use Timer Recording. 32. TO VCR COPY Button Press this when you copy from the DVD to the VCR. 33. REC PAUSE Button Press this to pause during recording.

Input Level

Adjusts the level of the input signal.
Darker : If you feel the screen is too light
Press the buttons to select Video, then press the ENTER or button. Video option menu will be displayed.
No Disc Timer Rec. Setup TV Aspect Input Level Black Level : 16:9 Wide : Darker : 7.5 IRE
and you want to make the screen darker. Lighter : If you feel the screen is too dark and you want to make the screen lighter.

Black Level

Adjusts the black level of the screen. 7.5 IRE : This will enhance the black level for increased brightness/contrast when viewing DVDs. Select this when you want to make the screen lighter. 0 IRE : This is the standard NTSC reference black level for consistent brightness/contrast across all sources. Select this when you want to make the screen darker.

3D Noise Reduction : Off

Press the buttons to select the desired video option, then press the ENTER or button.

3D Noise Reduction

Off : Normal On : Select to remove noise from the screen.
Press the RETURN or button to return to the previous menu. Press the MENU button to exit the menu.
This function depends on disc type. It may not work for some disc types. IRE: Short for the Institute of Radio Engineers. An IRE unit is a relative unit of measure equaling 1/140th of the peak-to peak (p-p) video amplitude.

36 - English

Page 37
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating - which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
The Re-enter Password screen appears to confirm the password. Enter your password again, and then press the ENTER or button.
No Disc Timer Rec. Setup Password :Off Off On

Parental Control

With the unit in Stop mode/No Disc mode, press the MENU button on the remote control.
Press the buttons to select On, then press the ENTER or button. The Parental Control screen appears. Press the RETURN or button to return to the previous menu. Press the MENU button to exit the menu. Refer to Troubleshooting if you forget your password. (See page 91)

About the Rating Level

Press the buttons to select Rating Level, then press the ENTER or button.
No Disc Timer Rec. Setup Password Rating Level Change Password : On : Level 1 Kids
Press the buttons to select Parental Control, then press the ENTER or button.
No Disc Timer Rec. Setup Create the password Parental Control
NUMBER ENTER RETURN EXIT No Disc Timer Rec. Setup Password

Create a 4-digit password using the 0 to 9 buttons on the remote control.
No Disc Timer Rec. Setup Confirm the password Parental Control MOVE
:On 8 Adults Level :Level 7 Kids Level 1 Level 6 Change Password Level 5 Level 4 Level 3 Level 2 Level 1 Kids Rating Level ENTER RETURN

NUMBER ENTER RETURN EXIT

Press the buttons to select the rating level you want, then press the ENTER or button. For example, if you select up to Level 6, discs that contain Level 7, 8 will not play. A larger number indicates that the program is intended for adult use only.

English - 37

Page 38
About the Change Password

VCR Setting

Press the buttons to select Change Password, then press the ENTER or button.
This function allows you to setup the VCR.

No Disc Timer Rec. Setup

Change Password
No Disc Timer Rec. Setup Setup

Enter the password

System Clock Set Channel Set Language Audio Video Parental Control
Enter the 4-digit password using the number buttons on the remote control. The Confirm the password message will be displayed.
No Disc Timer Rec. Setup Confirm the password Change Password
Press the buttons to select System, then press the ENTER or button.
No Disc Timer Rec. Setup VCR Video Input Chapter Creator : AV 1 : Off DVD EP Mode Time : 6 Hours Quick Recording : Off

System

Enter your password again.
Press the buttons to select VCR, then press the ENTER or button.
No Disc Timer Rec. Setup Tape Length Auto Play Auto Repeat : T120 : On : Off

38 - English

Page 39
Press the buttons to select the desired VCR option, then press the ENTER or button.

Video Input

Tape Length
This information is usually printed on the tape box. The menu cycles through: T-120, T-160 or T-180. Once the type of cassette is set, the VCR can display the amount of time remaining on the tape when you press the INFO button.
No Disc Timer Rec. Setup Tape Length Auto Play Auto Repeat T120 T160 On T180 Off
You can watch video from an external component through the AV 1(Composite) or S-video input jacks.

Auto Play

If you want your videotapes to play automatically when you insert them, turn on Auto Play. Off : Auto play is disabled. On : The VCR will automatically begin playing a video tape when it is inserted, as long as the safety tab of the cassette has been removed.
No Disc Timer Rec. Setup Tape Length Auto Play Auto Repeat : T120 : Off On : On Off

Fast 1/ Fast 1 Fast 2/ Fast 2 DVD-VIDEO/ DVD-RAM/DVDRW Fast 3/ Fast 3 Fast 4/ Fast 4 DVDR Fast 5/ Fast 5 Fast 6/ Fast 6

AUDIO CD(CD-DA)

X2 X4 X8
Press the TITLE MENU button to move to the title menu of the disc. Use this button if the disc contains more than one title. Some discs may not support the title menu functionality.
You can scan the program in reverse order. To return to normal speed playback, press the ll button. No sound is heard during Scan(Search) mode, except on CDs (CD-DA). (You can hear the sound during forward search (Fast 1) in disc.) Depending on the disc type, the sound quality may lower during Fast 1 mode.
For DVD-RAM/DVDRW/DVDR disc
Press the TITLE LIST button to display title list.
Skipping Chapters or Tracks
During the playback, press the l or l button on the remote control.
Title List : The Title List is simply a list of titles on a disc. If a title is deleted, that title cannot be played again. Playlist (DVD-RAM/-RW(VR)) : A playlist is a custom-made list of titles. When one playlist is played, only the titles within the playlist will play and then stop. Even if that playlist is deleted, the original recording will not be deleted.
If you press the l button If you press the l button, it moves to the beginning of the chapter, track or marker(DVD-RAM, DVD-RW(VR mode) ). Pressing the button once again within 3 seconds returns to the beginning of the previous chapter, track or marker(DVD-RAM, DVD-RW(VR mode) ).
If you press the l button If you press the l button, it moves to the next
chapter, track or marker(DVD-RAM,DVD-RW (VR mode) )
Skipping ahead 30 seconds
During the playback, press F.ADV/SKIP button to skip ahead exactly 30 seconds.

44 - English

Page 45
Slow Motion Play/ Step Motion Play
Slow Motion Play (DVD-VIDEO / DVD-RAM / DVDRW / DVDR)

About ANYKEY

The ANYKEY functions allows you to easily search for a desired scene by accessing title, chapter or time. You can also change the subtitle and audio settings and set some features including Repeat, Angle and Zoom.
During pause mode, press the SEARCH or button on the remote control for more than 1 second. Each time you press the button : l Slow 1 l Slow 2 l Slow 3 Each time you press the button : l Slow 1 l Slow 2 l Slow 3 To return to normal speed playback, press the ll button.

0:00:01

Press the buttons to select the desired repeat mode you want to play repeatedly, then press the ENTER button.
TRACK 1 No. Title 001 TRACK 1 PLAY MODE 002 TRACK 2 Repeat : Off 003 TRACK TRACK 4 Music List 01/15 Length 00:03:50 00:04:00 00:03:49
Press the buttons to select a desired Play Option, then press the ENTER button.
TRACK 1 No. Title 001 TRACK 1 PLAY MODE 002 TRACK 2 Repeat : Off 003 TRACK 3 Play option : Normal TRACK 005 TRACK 5 Music List 01/15
Length 00:03:50 00:04:00 00:03:49 00:03:47 00:04:29
Repeat Track (CD (CD-DA)/MP3) Repeat Folder (MP3) Repeat Disc (CD (CD-DA)/MP3)
- To return to normal playback -
Normal: Tracks on a disc are played in the order in which they were recorded on the disc. Playlist: The Playlist playback option allows you to select the order in which you want tracks to play. Intro[ I ]: The first 10 seconds of each track will be played. If you want to listen to the music that you have selected, press the ENTER button or ll button. The play option will be changed to Normal Play. When Intro Play is completed, Normal Play is performed. Random[ R ]: The Random option plays a discs tracks in random order. After a random list is generated and played completely, another random list is generated and played. Random Play is continued until the play option is changed.

English - 53

6:18 PM

Page 54

To Program Tracks
You can register a maximum 30 tracks in the playlist.

Playing a Picture Disc

In still mode, press the ANYKEY button. The Play option will be highlighted. Press the buttons to select Playlist, then press the ENTER button. Playlist screen is displayed.
CDDA CDDA CDDA CDDA CDDA CDDA CDDA CDDA
Insert a JPEG into the disc tray.
JPEG Disc Navigation Timer Rec. Setup

Disc Navigation

Playlist 01/15
TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 TRACK 8
Press the buttons to select Disc Navigation, and then press the ENTER or button.
Press the buttons to select tracks in the order in which you want them to play, then press the ENTER button.
Press the buttons to select Photo, and then press the ENTER or button.

Playlist 04/15

TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 TRACK 004 TRACK 1 TRACK 2 TRACK 3 TRACK 4
Press the buttons to select a picture.

JPEG JPEG01

Photo List 01/10

JPEG01

JPEG02

JPEG03

JPEG04

JPEG05

JPEG06

JPEG07

If you selected a wrong track, press the button, then press the buttons to select the wrong track. Press the CANCEL button. The wrong track will be removed.

Slide Show

To see the next 8 pictures, press the l button. To see the previous 8 pictures, press the l button.

Press the buttons to select Timer Record, then press the ENTER or button. You can go to the Timer recording screen directly by pressing the TIMER REC button. The Timer Recording screen is displayed.

DVD-RAM(VR) No.

To DVD
Scheduled Record List Current Time 1:05 AM Date

Date 01/01

Source

Source CH06

End Mode Edit

End Mode

No. 01

01:05 AM 03:05 AM SP

Recordable Time

00:45 SP

The timer counter decreases by the minute from 4:00 to 0:00, then the DVD Recorder & VCR stops recording.

62 - English

2:12 PM

Page 63

Fill in the items using the buttons. : Moves to the previous/next item, or 0~9 : To set or change items in the Scheduled Record List Menu. To : Select the media to record (DVD or VCR). Source : The video input source (AV 1, AV 2), or the broadcasting channel you want to make a timer recording from. Date: Date that the timer recording starts - There are three options when setting the date. see below:
! To make a recording on a specific date, press the
When you are recording at EP mode on a DVD-RW(V)/-R disc, it may not record for the full 6 or 8 hours because the unit uses the VBR(Variable Bit Rate) ENCODING system. For example, if you record a program with a lot of action, it uses a higher bit rate which in turn consumes more disc memory.
Recording mode (VCR) AUTO : Select when you want to set video quality automatically. The auto quality depends on remaining time of VCR tape. SP : Standard Play, for best picture quality. SLP : Super Long Play, for maximum recording time (3 times SP).
or number buttons until the date you want appears.
No. 01 To DVD Source CH06 Date 01/01 Start End Mode

03:05 AM 05:05 AM SP

@ To make a recording at the same time every day
(Mon-Fri), press the buttons until Mon-Fri appears:
No. 01 To DVD Source CH06 Date Start End Mode
Press the ENTER button. will appear on the front panel. It means that a timer recording is registered. If the timer settings overlap The programs are recorded in order of priority. If timer recording is set for the first program and then again for the second program and both programs overlap, the following message will appear on the screen: This setting is identical with 1,2. The message shows that the first program has priority. After recording of the first program is complete, the second program starts being recorded. To exit without saving the current setting Press the MENU or TIMER REC button. To return to the previous menu Press the RETURN button if you dont want to set a timer recording.

00:00:00 STOP Copy All MOVE ENTER RETURN EXIT
You can use the II, I or I, or buttons to search for the Start position. Press the ENTER button at the start point.
DVD-RAM(VR) No. Start : 00: 37 End : : Edit
00:01:07 VCR-->DVD RPS Copy All MOVE ENTER RETURN EXIT
00:01:07 FF Copy All MOVE ENTER RETURN EXIT
The VCR will fast forward, searching for a start position and then automatically start a copy. The Start and End points may not match up exactly. If you want to copy all content, select Copy All.

Direct copy VCR to DVD

Insert the VHS tape you want to copy. Insert a recordable DVD disc. Press DVD copy button on front panel or remote control(TO DVD). To stop recording press the STOP button.

68 - English

Page 69

Playing the Title List

This section introduces basic functions of DVD editing and explains both edit functions for the recording on a disc and edit functions for the entire disc. Follow these instructions to play back a scene from the Title List.
Using the TITLE LIST button
Press the TITLE LIST button. The Title List screen is displayed.
DVD-RAM(VR) JAN/01/2006 No. Title 12:00 12:30 01:00 01:JAN/01/JAN/01/JAN/01/JAN/01/2006 00:00:11 00:00:09 00:01:36 00:00:11 Title List 1/4 Length Edit
JAN/01/2006 12:00 AM CH1 JAN/01/2006 SP
Playing the Title List..69 Basic Editing (Title List)...71 Renaming(Labeling) a Title..71 Locking(Protecting) a Title...72 Deleting a Title...73 Deleting a Section of a Title..73 Editing a Chapter...75 Dividing a Title...77 Advanced Editing (Playlist)..78 Creating a playlist...78 Playing Titles in the Playlist..79 Renaming a Playlist Title..79 Editing a Scene for the Playlist..80 Copying a Playlist Title to the VCR..83 Deleting a Playlist Title from the Playlist..84 Disc Manager..84 Editing the Disc Name...84 Disc Protection...85 Formatting a Disc..86 Finalizing a disc...86 Unfinalizing a disc (V/VR mode)..87 Delete All Title Lists...88 Edit Compatible...89
Press the buttons to select a title you want to play from Title List, and then press the PLAY button. The selected title will be played back. To stop title play, press the STOP button. To return the title list screen, press the TITLE LIST button.

Using the MENU button

DVD-RAM(VR) Title List Playlist Disc Manager Timer Rec. Setup Copy MOVE ENTER RETURN Title List

Title List

English - 69

12:0 PM

Page 70
Press the buttons to select Title List, then press the ENTER or button twice.
Title List Screen Elements
DVD-RAM(VR) JAN/01/2006 No.
The Title List screen is displayed.
JAN/01/2006 01:00 AM CH1 JAN/01/2006 XP

DVD-Recorder Title List

Do you want to delete? (Related playlists may be deleted.)
JAN/01/2006 12:00 AM CH1 JAN/01/2006 EP Yes No JAN/01/2006 12:00 AM CH1 JAN/01/2006 SP
MOVE MOVE ENTER RETURN EXIT

English - 73

Page 74
Press the buttons to select a title you want to delete from the Title List, then press the ENTER or button.
Press the ENTER button at the end point. The image and end point time are displayed in the Section deletion ending point window.
DVD-RAM(VR) Edit Title List
Tist List No. 03 Start End

00:00:01

00:00:15 00:00:15

Start MOVE

Delete ENTER RETURN

Return EXIT

Press the buttons to select Edit, then press the ENTER or button. The Edit Title List screen is displayed.
Press the buttons to select Delete, then press the ENTER button.

00:00:02 00:00:00

00:00:06 00:00:06
00:00:00 00:00:00 Start MOVE End Delete ENTER RETURN

Edit Title List

Press the ENTER button at the starting point. The image and starting point time are displayed in the section deletion starting point window. Edit Title List Screen Elements
Start DVD-RAM(VR) Edit Title List
Title List No. 03 Start End Do you want to delete? (Deleted part will not be restored.) 00:00:10 Yes End Delete ENTER RETURN No Return EXIT
MOVE Tist List No. 03 Start End

00:00:02

00:00:00 00:00:02
Press the buttons to select Yes, then press the ENTER button. The selected section has been deleted. To return to the Title List screen, press the buttons to select Return.
The length of the section to be deleted must be at least 5 seconds long. If the length of the section to be deleted is less than 5 seconds, you will be prompted with the message 'The range is too short.'. If the end time precedes the starting time, you will be prompted with the message End point cannot be marked earlier than start point. The section cannot be deleted when it includes a still picture. Press the MENU button after the operation has finished. The Title List screen will disappear.
1 Playback bar 2 Playtime 3 Section deletion starting point window and time 4 Section deletion end point window and time Select the start and end points of the section you want to delete using the playback related buttons. Playback related buttons: (II,I , ,).

74 - English

Title List Playlist
Disc Name Disc Protection

: : Not Protected :

Disc Manager Disc Format Timer Rec. Setup Copy MOVE ENTER
Press the buttons to select Disc Protection, then press the ENTER or button.
DVD-RAM(VR) Title List Playlist Disc Name Disc Protection : :Not Protected Protected :Protected
Disc Manager Disc Format Timer Rec.
Press the buttons to select Save, then press the ENTER button. A disc name is given to the disc.
DVD-RAM(VR) Title List Playlist Disc Manager Timer Rec. Setup Copy MOVE ENTER RETURN EXIT Disc Name Disc Protection Disc Format : Disc : Not Protected :
Setup Copy MOVE ENTER RETURN EXIT
Press the button to select Protected, then press the ENTER or button.
DVD-RAM(VR) Title List Playlist Disc Name Disc Protection : : Protected :
Disc Manager Disc Format Timer Rec. Setup
You may need to clear disc protection before beginning editing. (see page 85) Depending on the kind of disc, the displayed screen may be different.

English - 85

Page 86

Formatting a Disc

Use these instructions to format a disc. Clear disc protection before formatting.
DVD-RW You will be prompted with the confirmation message Choose the recording format for DVD-RW.

DVD-RW(VR) Disc Manager

DVD-RAM(VR) Title List Playlist Disc Manager Timer Rec. Setup Copy MOVE ENTER RETURN EXIT Title List

: : Not Protected

Format : DVD-VR Disc Manager Disc the recording format for DVD-RW. Choose Disc Finalize Timer Rec. Delete All Title Lists DVD-V DVD-VR Setup Copy MOVE ENTER RETURN
Press the buttons to select Yes, then press the ENTER button. The disc is formatted. DVD-VR and DVD-V modes are compatible with the following disc types.
DVD-VR DVD-V DVD-RW DVD-R

DVD-RAM DVD-RW

Finalizing a disc
After you record titles onto a DVD-RW/DVDR disc with your DVD Recorder & VCR, it needs to be finalized before it can be played back on external devices.
Press the buttons to select Disc Format, then press the ENTER or button.
DVD-RW(VR) Title List Playlist Disc Manager Timer Rec. Setup Title List
DVD-RAM/+RW You will be prompted with the confirmation message 'Do you want to format disc?'.
DVD-RAM(VR) Title List Playlist Disc Name Disc Protection : : Not Protected
Disc Manager Copy MOVE ENTER RETURN EXIT
Format : Disc Manager Disc you want to format disc? Do Delete All Title Lists Timer Rec. Setup Copy MOVE ENTER RETURN Yes No

Unfinalize Disc Manager DiscDisc will be unfinalized. Do you want to continue? Timer Rec. Setup Copy MOVE ENTER RETURN Yes No
Press the buttons to select Yes, then press the ENTER button. The disc is unfinalized.
Press the button to select Delete All Title Lists, then press the ENTER or button.
DVD-RAM(VR) Title List Playlist Disc Name Disc Protection : : Not Protected :
A DVD-RW can be finalized or unfinalized in Video mode.
Finalize DVD-Video(RW) Unfinalize DVD-RW(V) Additional recording, protection and deletion are possible.
Operation Same as DVD-Video
A DVD-RW can be finalized or unfinalized in VR mode.
Finalize Mark DVD-RW(VR:F) Additional recording, deletion, editing, and protection are impossible. Unfinalize
You will be prompted with the confirmation message 'Do you want to delete all title lists?'.
DVD-RW(VR) Additional recording, deletion, editing, and protection are possible.

Operation

: Disc Manager Disc Formatto delete all title lists? Do you want Delete All Title Lists Timer Rec. Yes No Setup Copy MOVE ENTER RETURN

88 - English

Page 89
When Protected Title exists: The Delete All Title List function will not operate. If there is a title containing a still picture, however, that function will not operate. If you want to delete a protected title, disable Protect for it on the Lock item.
Press the buttons to select Edit Compatible, then press the ENTER or button.
DVD+RW Title List Disc Manager Timer Rec. Setup Disc Name Disc Format Edit Compatible :
Press the buttons to select Yes, then press the ENTER button. All title lists are deleted.
DVD+RW Title List Disc Name :

Edit Compatible

For DVD+RW discs, this function needs to be performed in order to view edited chapters or titles on a standard DVD player.
Disc Manager Disc Format Do you want to execute Edit compatible? Edit Compatible Timer Rec. This may take more than an hour depending on the configuration. Setup Yes No Copy
DVD+RW Title List Disc Manager Timer Rec. Setup Copy Title List
You will be prompted with the confirmation message 'Do you want to execute Edit compatible? This may take more than an hour depending on the configuration.'.
Press the buttons to select Yes then press , the ENTER button to execute the edit compatible. After performing this function, you can go to TITLE MENU screen directly by pressing the TITLE MENU button.