00995A-VR330_XAA-Eng1

2006.2.27

3:6 PM

Page 1

Instruction Manual

DVD-VR330

www.samsung.com

English

AK68-00995A-01

Page 2

Warning

Getting Started
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product.
Do not install this equipment in a confined space such as a bookcase or similar unit. WARNING : To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture. CAUTION : This DVD Recorder & VCR USES AN INVISIBLE LASER BEAM WHICH CAN CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE RECORDER CORRECTLY AS INSTRUCTED. CAUTION THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. CAUTIONS Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Attention: Pour viter les chocs lectriques, introdure la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond. This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections. FCC NOTE (for U.S.A): This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Caution: FCC regulations state that any unauthorized changes or modifications to this equipment may void the users authority to operate it. This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere. This DVD Recorder & VCR is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not correspond to the Region number of this , the DVD Recorder & VCR cannot play the disc. This device is protected by U.S. Patent Nos.4,631,603;4,577,216;4,819,098;4,907,093; and 6,516,132. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision,and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. This product is covered by one or more of the following U.S. patents: 5,034,830 5,060,200 5,457,669 5,561,649 5,691,858 5,705,762 5,987,417 6,043,912 6,222,983 6,272,096 6,377,524 6,377,531 6,385,587 6,389,569 6,389,570 6,408,408 6,466,532 6,473,736 6,477,501 6,480,829 6,556,520 6,556,521 6,556,522 6,594,208 6,674,697 6,674,957 6,721,493 6,728,474 6,741,535 09/610381 09/610695

Reference

Troubleshooting (DVD-VIDEO/DVD-RAM/DVDRW/DVDR).91 Troubleshooting (DVD).92 Troubleshooting (VCR).93 Problems and Solutions (Display error message).94 Specifications.96

English - 7

11:23 AM

Page 8

General Features
The DVD-VR330 allows you to record and play high quality digital video on DVD-RAM/DVDRW/DVDR discs. You can record and edit digital video on DVD-RAM/DVDRW/ DVDR discs as if they were VCR tapes. High quality digital audio and video recording and playback You can record up to approximately 16-hours of video on a double side 9.4 GB DVD-RAM disc,up to 15-hours on a dual-layer 8.5GB DVDR disc, and up to 8-hours on a 4.7 GB DVD-RAM/DVDRW/DVDR disc, depending on the recording mode. Creating DVD video titles using DVDRW/DVDR discs With the DVD-VR330, you can create your own DVD video titles on 4.7 GB DVDRW/DVDR or 8.5GB DVDR discs. A Variety of Recording Options Select an appropriate recording mode between XP, SP, LP and EP to meet your recording needs. (See page 59.) XP mode - High quality, about 1 hour SP mode - Standard quality, about 2 hours LP mode - Low quality, about 4 hours EP mode - Lower quality, about 6 or 8 hours - The dual layer DVDRs have approximately double the capacity of single layer DVDRs. (See page 42.) Copying digital camcorder content using DV input jack Record digital camcorder images onto DVD-RAM/DVD RW/DVDR discs or video tape using the DV input jack (IEEE 1394-4pin). (See page 61.) High quality progressive scan Progressive scanning provides high resolution and flicker free video. The 10-bit 54-MHz DAC, 2D Y/C Separating circuitry and Time Base Corrector processor technology provide you with the highest image playback and recording quality. (See page 20.) Component progressive scan output video is available in both DVD and VCR modes. A variety of functions with easy-to-use user interface Integrated menu system and messaging functionality allow you to perform the desired operations easily and conveniently. With a DVD-RAM/DVD-RW(VR mode) disc, you can edit recorded images, create playlist, and edit video in specific sequence according to your needs.
Before Reading the Users Manual

No Disc Timer Rec. Setup Clock Data CH Time Zone Daylight Saving : Automatic : Automatic : Automatic Automatic Yes No

Clock Set

Press the buttons to select Manual Clock Set, then press the ENTER or button.

Manual Clock Set

If Auto Setup fails to set the DVD Recorder & VCRs internal clock by locating a local TV station, follow these steps to set the date and time manually. For accurate Timer Recording, your DVD Recorder & VCR's internal clock must be set correctly. With the unit in Stop mode/No Disc mode, press the MENU button.

No Disc

Timer Rec. Setup Month Day 01 SUN Press numeric keys or keys. 01 Year 2006 Hour Minute AM/PM AM
Press the buttons to select the Current Date and Time, then press the ENTER button. When the current time is stored in memory and then the set is powered off, the current time will appear in the front panel display.
: Sets the value You can set the value using the number (0~9) buttons. : Moves to items

English - 31

Page 32

Channel Set

Press the buttons to select Antenna/Cable TV, then press the ENTER or button.
No Disc Timer Rec. Setup Antenna/Cable TV AntennaTV : Cable Auto Channel Memory Cable TV Channel Add/Delete RF Output Channel : CH3
This feature allows you to manually set the DVD Recorder & VCRs tuner band to Antenna or Cable, whichever you connected to the Antenna In jack during initial setup. Use this setting only if Auto Setup detected the incorrect tuner band, i.e. channels are coming in on the wrong channel numbers.
Select the Antenna or Cable TV(Signal Source) that matches the antenna connection you selected on pages 15~17. Antenna - Select this if the DVD Recorder & VCR is connected to an indoor or outdoor VHF/UHF antenna. (See pages 15, 17) Cable TV - Select this if the DVD Recorder & VCR is connected to a cable TV. (See page 16)

Auto Channel Memory

Auto Channel Memory will automatically seek and store all active channels in your area.
With the unit in Stop mode/No Disc mode, press the MENU button. Press the buttons to select Setup, then press the ENTER or button. Press the buttons to select Channel Set, then press the ENTER or button.
No Disc Timer Rec. Setup Antenna/Cable TV Channel Add/Delete RF Output Channel : CH3 : Antenna
Press the buttons to select Channel Set, then press ENTER or button.

32 - English

Audio: For the disc audio language. Subtitle: For the disc subtitles. Disc Menu: For the disc menu contained on the disc. On-Screen Menu: For the on-screen menu of your DVD Recorder & VCR.
Press the buttons to select the desired language, then press the ENTER or button.
I Press the RETURN or button to return to the
previous menu. Press the MENU button to exit the menu. I The selected language will only appear if it is supported on the disc.

34 - English

Page 35
Setting Up the Audio Options
Allows you to setup the audio device and sound status settings depending on the audio system in use.

Digital Output

1. PCM : Converts to PCM(2CH) 48kHz audio. Select PCM when using the Analog Audio Outputs. 2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using the Digital Audio Outputs. Be sure to select the correct Digital Output or no audio will be heard.
With the unit in Stop mode/No Disc mode, press the MENU button. Press the buttons to select Setup, then press the ENTER or button.
1. Off : Doesnt output digital signal. 2. On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder. When DTS soundtrack is played, sound is not output from Analog Audio Output.
Press the buttons to select Audio, then press the ENTER or button. Audio setup menu will be displayed.
No Disc Timer Rec. Setup Digital Output DTS : PCM : Off

Dynamic Compression

This is only active when a Dolby Digital signal is detected. 1. On : When the Movie soundtracks are played at low volume or from small speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud. 2. Off : You can enjoy the movie with the standard Dynamic Range.

Dynamic Compressiom : On

Press the buttons to select the desired audio option, then press the ENTER or button.
Press the buttons to select the desired item, then press the ENTER or button.
previous menu. Press the MENU button to exit the menu.

English - 35

Page 36
Setting Up the Display(Video) Options
This function allows you to setup the TV screen settings.

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio) 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. 4:3 Pan & Scan : Select this for a conventional size TV when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.) 16:9 Wide : You can view the full 16:9 picture on your wide-screen TV.

Input Level

Adjusts the level of the input signal.
Darker : If you feel the screen is too light
Press the buttons to select Video, then press the ENTER or button. Video option menu will be displayed.
No Disc Timer Rec. Setup TV Aspect Input Level Black Level : 16:9 Wide : Darker : 7.5 IRE
and you want to make the screen darker. Lighter : If you feel the screen is too dark and you want to make the screen lighter.

Black Level

Adjusts the black level of the screen. 7.5 IRE : This will enhance the black level for increased brightness/contrast when viewing DVDs. Select this when you want to make the screen lighter. 0 IRE : This is the standard NTSC reference black level for consistent brightness/contrast across all sources. Select this when you want to make the screen darker.

3D Noise Reduction : Off

Press the buttons to select the desired video option, then press the ENTER or button.

3D Noise Reduction

Off : Normal On : Select to remove noise from the screen.
Press the RETURN or button to return to the previous menu. Press the MENU button to exit the menu.
This function depends on disc type. It may not work for some disc types. IRE: Short for the Institute of Radio Engineers. An IRE unit is a relative unit of measure equaling 1/140th of the peak-to peak (p-p) video amplitude.

36 - English

Page 37
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating - which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
The Re-enter Password screen appears to confirm the password. Enter your password again, and then press the ENTER or button.
No Disc Timer Rec. Setup Password :Off Off On

Parental Control

With the unit in Stop mode/No Disc mode, press the MENU button on the remote control.
Press the buttons to select On, then press the ENTER or button. The Parental Control screen appears. Press the RETURN or button to return to the previous menu. Press the MENU button to exit the menu. Refer to Troubleshooting if you forget your password. (See page 91)

About the Rating Level

Press the buttons to select Rating Level, then press the ENTER or button.

Quick Recording

It takes about 10 seconds for a disc to load (initialize) every time you turn on the unit. To bypass this initialization process, you can set the Quick Recording feature to On. This enables you to record immediately without having to wait for the disc to load.
Do you want to create the chapter menu after this recording?
Press the buttons to select Yes and press the ENTER button and recording begins. In XP and SP mode, you must record at least 5 minutes to create a chapter. In LP and EP mode, 15 minutes. Press the STOP button to stop recording.
To display the created titles, finalize the disc (see page 86) and then press the TITLE MENU button. The title menu will be displayed.
1/1 JAN/01/2006 12:00 AM CH1 JAN/01/2006 01:00 AM CH1 JAN/01/2006 12:30 AM CH1 JAN/01/2006 01:30 AM CH1 MOVE

No Disc System

Previous

Timer Rec. Setup

VCR Video Input Chapter Creator : AV 1 : Off DVD EP Mode Time : 6 Hours
To display the created chapters, select the desired Title and then press the DISC MENU button. The chapter menu for the selected Title will be displayed.
Press the buttons to select Quick Recording, then press the ENTER or button.
No Disc Timer Rec. Setup VCR Video Input Chapter Creator : AV 1 : Off On DVD EP Mode Time : 6 Hours

3 System

Quick Recording : Off Off
On DVD-RW discs, additional chapters and titles can be added to a finalized disc by unfinalizing and recording again.On DVD-R discs, once finalized, no additional chapters or titles can be recorded. The Automatic Chapter Creator function does not work during Timer Recording or when you turn the power off. DVD-R discs cannot be unfinalized.
Press the buttons to select On, then press the ENTER or button.

CAUTION

The Quick Recording is set to Off as default. If this function is set to on, power consumption will be increased when the unit is powered off.

English - 41

Page 42
This section introduces basic functions of playback by disc type.
Dolby Digital DTS Digital Audio

Before Playing

Read the following information before playing a disc.
Region code (DVD-Video only)
Both the DVD Recorder & VCR and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this DVD Recorder & VCR is described on the rear panel of the DVD Recorder & VCR.
Disc types that can be played

Disc Types

Stereo NTSC broadcast system in U.S.A, Canada, Korea, Japan,etc. MP3

Disc Logo

Moving to a scene directly using the ANYKEY
If you want to move to a title or a chapter to find a desired scene.
Press the ANYKEY button during playback.
Step Motion Play (DVD-VIDEO / DVD-RAM / DVDRW / DVDR)
Press the buttons to select Title, Chapter.

Title Chapter Time

1/2 1/28 00:00:01 ENG ENG Off 1/1 Off D 5.1CH
During pause mode, press the F.ADV button on the remote control. Each time the button is pressed, a new frame will appear. To return to normal speed playback, press the ll button.
Subtitle Audio Repeat Angle Zoom

CHANGE

No sound is heard during Step or Slow mode.
Press the buttons or number (0~9) buttons to select the desired scene. Then, press the ENTER button.

English - 45

Page 46
If you want to move to a desired time to help you find a scene.
Select repeat mode using button. Press the ENTER button. To make the screen disappear, press the ANYKEY or RETURN button. DVD-RAM/DVD-RW(VR mode), unfinalized DVDR and unfinalized DVD-RW (Video mode) do not repeat a chapter.
Press the buttons to select Time.
Title Chapter Time Subtitle Audio Repeat Angle Zoom
1/2 1/28 00:00:01 ENG ENG Off 1/1 Off 0~9 NUMBER D 5.1CH
Playing a Certain section Repeatedly (A-B Repeat Playback)
Enter the time in the sequence of hours, minutes, and seconds using the number buttons, then press the ENTER button. This may not work for some discs. When an Audio CD(CD-DA) or an MP3 disc is inserted, depending on the disc type, the information display may not be appear. The Time Search function does not operate in some discs. To make the screen disappear, press the ANYKEY button again.
Press the buttons to select Repeat.

Repeat Playback

Playing Repeatedly(Repeat Playback)
Press the button to select A-B, then press the ENTER button.
Press the ENTER button at the point where you want repeat play to start (A) and press it again at the point where you want the repeat play to stop (B). Repeat playback of the A-B section starts.

Repeat A-B A-B

- To return to normal playback DVD-VIDEO
Press the CANCEL button to return to normal playback.
If you set point (B) before five seconds has lapsed, the prohibition mark ( ) will appear. CDs do not support the Repeat A-B function.

46 - English

Page 47
Selecting the Subtitle & Audio Language
Selecting the SUBTITLE language
Subtitle languages may not work depending on the disc type. This is only available during playback.

Clearing a Bookmark

Press the ENTER button when the desired scene appears. The number 1 is displayed and the scene is memorized.

1 - - - - - - - - --

RETURN MOVE PLAY CANCEL RETURN
Press the button to move to the next position.
Press the ENTER button again when the desired scene appears. The number 2 is displayed and the scene is memorized. Repeat above to bookmark other positions. You can bookmark up to 10 scenes.
Press the CANCEL button to delete the selected bookmark.

SELECT

When the disc tray is opened and then closed, bookmarks will disappear.

English - 49

Page 50

Using the Markers

Playing back a Marker

(VR mode)

Press the buttons to select a marked scene.

Marker

- - - - - - - -- N : 2
-- -- -- -- -- -- -- -- -- -N:0
Press the ENTER button when the desired scene appears.
01 - - - - - - - - -- N : 1
Press the ENTER or ll button to start playing from the selected scene. If you press the NEXT SKIP (l )button or the PREVIOUS SKIP(l)button in marker mode, and the next or current marked point plays for shorter than three seconds, playback starts from the previous marked point.

Clearing a Marker

MOVE PLAY CANCEL RETURN
The number 01 is displayed and the scene is memorized.
Press the buttons to select a marked scene. Press the CANCEL button to delete the selected mark.

N : 10

Press the ENTER button again when the desired scene appears.
The number 02 is displayed and the scene is memorized. DVD-RAM or DVD-RW (VR Mode) discs have the Marker function instead of the Bookmark function. The Marker function allows you to mark up to 99 scenes. Since the scenes may be displayed as many different pages, numbering is necessary. If a disc in use is encoded with Disc Protect, Markers cannot be set or deleted. Only playback is available.
When a marker is cleared while DVD-RAM/ DVD-RW(VR mode) is playing, marker numbers will change. For example, if the 7th marker is cleared after ten markers are registered, the marker numbers after the eighth will automatically move ahead by one and the 8th marker becomes the 7th.

50 - English

Page 51
Playing back an Audio CD (CD-DA)

You may control your Camcorder using the IEEE1394 (DV) interface. Follow these directions to record onto a disc or tape from a camcorder that has a DV output jack.
Connect the AV out jack of your External Device to the AV IN jack on the front or rear of your DVD Recorder & VCR using the Audio/Video Cable. Power on your DVD Recorder & VCR and switch to AV In mode by pressing the INPUT SEL. button on the remote control. The front panel display changes in the following sequence depending on the Video input setting in the menu. AV1: Channel Number AV 1 AV 2 DV S-Video: Channel Number SUPER AV 2 DV
Connect the DV output jack of your camcorder to the DV input jack on the front of your DVD Recorder & VCR using a DV cable. Power on your DVD Recorder & VCR and switch to DV mode by pressing the INPUT SEL. on the remote control. Press the REC SPEED button repeatedly to select the recording speed(quality). SP LP EP XP If the input is set to DV, a playback/record menu that enables camcorder control appears on the top of the screen.
Press the REC SPEED button repeatedly to select the recording speed(quality). SP LP EP XP
When your DVD Recorder & VCR is in the Stop mode, start playback on your external device.
Press the REC button on your DVD Recorder & VCR to start recording when the desired video is displayed from the external device. Press the STOP button on your DVD Recorder & VCR when the recording is finished.
The DV device is connected. MOVE SELECT RETURN
Select the Play icon on the upper part of the screen to playback the camcorder and find the starting position to copy. To start recording, Press the button to select rec(G) icon in the top side of the screen, then press the ENTER button. You can press the REC button on the remote control to start recording. To display playback related icons on the screen, press either direction button on the remote control. Press the STOP button on your DVD Recorder & VCR when the recording is finished. Some camcorders may not work with your DVD Recorder & VCR even if they have a DV output jack. Also refer to the user manual for your camcorder when recording through the DV jack.
Also refer to the user manual for your External Devices when recording through AV In jacks on the DVD/VCR using Audio/Video cable. You can record an external source through S-Video cable. (see page 24). For more information on changing the Video Input from AV1 to S-Video, see page 39(Video Input).

English - 61

Page 62
Making a One Touch Recording (OTR)
One-Touch Recording (OTR) allows you to add recording time in preset increments up to 4 hours by pressing the REC button repeatedly.

Making a Timer Recording

The clock (Setup Clock Set) must be set before proceeding with a timer recording. (See page 30)
Press the CH/TRK ( / ) buttons or number buttons to select the channel to record. If you want to record through a connected external component, press the INPUT SEL. button to select an appropriate external input(AV1, AV2 or DV). CATV channel: 1 to 125 TV channel: 2 to 69
Press the OPEN/CLOSE button, and place a recordable disc on the disc tray.
Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display.
Press the REC button to start recording.
With the unit in Stop mode, press the MENU button.
While in Record mode, press the REC button again to activate the One-Touch Recording (OTR). Record length 0:30 appears on the On-Screen Display and the DVD Recorder & VCR will record for exactly 30 minutes.
Press the buttons to select Timer Rec., then press the ENTER or button.
DVD-RAM(VR) Title List Playlist Disc Manager Timer Record Scheduled Record List
Continue pressing REC button to add recording time in preset increments up to 4hours. 0:30 1:00 1:30 2:00 3:00 4:00 Off The DVD Recorder & VCR stops recording automatically when the time has elapsed.
Timer Rec. Setup Copy MOVE ENTER RETURN EXIT
To stop recording Press the STOP ( ) button. The message Press STOP button once more to cancel Timer Record. is displayed. Press the STOP ( ) button again. The message Updating the Information of disc. Please wait for a moment. is displayed.
Press the buttons to select Timer Record, then press the ENTER or button. You can go to the Timer recording screen directly by pressing the TIMER REC button. The Timer Recording screen is displayed.

DVD-RAM(VR) No.

To DVD

JAN/01/JAN/01/JAN/01/JAN/01/JAN/01/2006
New free Space will be created equal to the length of the deleted title.
JAN/01/2006 01:00 AM CH1 JAN/01/2006

- Recording a title

Press the button to select Free Space, then press the ENTER or button. On-air TV images will appear on the left side of the title list.
DVD+RW Free Space No. Title 01 JAN/01/JAN/01/JAN/01/Free Space 12:00 00:00:11 12:30 00:00:09 01:00 00:01:36 Recording 01:30 01:58:04 Title List 4/4 Length Edit
Press the buttons to select Rename, then press the ENTER or button. The Rename screen is displayed.
DVD-RAM(VR) JAN/01/2006 01:00 AM CH1 Rename

EXIT Back Space

Save Space ENTER Delete RETURN Clear EXIT

Press the ENTER button.

English - 71

Page 72

Select the desired characters using the buttons, press the ENTER button.
DVD-RAM(VR) Sport(A1) Rename
Locking(Protecting) a Title
Follow these instructions to lock a title to protect it from accidental deletion.
Save Back Space MOVE Space ENTER Delete RETURN Clear EXIT
DVD-RAM(VR) Title List 1/4 No. Title 12:00 12:30 01:00 01:30 Length Edit 00:00:11 00:00:09 00:01:36 00:00:11
Back Space: Moves the cursor one position backwards. Space: Enters a blank and moves the cursor one forward (to the right). Delete: Deletes the character at the cursor position. Clear: Deletes all the character inputs. Save: Registers the character inputs. Press the buttons to select Save, and then press the ENTER button. The changed title name is displayed in the title field of the selected title.
DVD-RAM(VR) Sport(A1) No. Title Title List 3/4 Length Edit 01 JAN/01/2006 12:00 00:00:JAN/01/2006 12:30 00:00:Sport(A1) 00:01:JAN/01/2006 01:30 00:00:11
Press the buttons to select a title you want to protect in the Title List, then press the ENTER or button.
JAN/01/2006 12:00 AM CH1 JAN/01/2006 EP

Sport(A1) JAN/01/2006 XP

Press the buttons to select Protection, then press the ENTER or button.
DVD-RAM(VR) JAN/01/2006 Title List 5/31

Title Protection :

JAN/01/2006 12:00 AM CH1 JAN/01/2006 On Off
Press the buttons to select On, then press the ENTER button. The lock icon on the information window for the selected title changes to the locked status. ( )
DVD-RAM(VR) JAN/01/2006 No. Title 12:00 12:30 01:00 01:JAN/01/JAN/01/JAN/01/JAN/01/2006 00:00:11 00:00:09 00:01:36 00:00:11 Title List 3/4 Length Edit

Delete ENTER RETURN

Return EXIT

Press the buttons to select Edit, then press the ENTER or button. The Edit Title List screen is displayed.
Press the buttons to select Delete, then press the ENTER button.

00:00:02 00:00:00

00:00:06 00:00:06
00:00:00 00:00:00 Start MOVE End Delete ENTER RETURN

Edit Title List

Press the ENTER button at the starting point. The image and starting point time are displayed in the section deletion starting point window. Edit Title List Screen Elements
Start DVD-RAM(VR) Edit Title List
Title List No. 03 Start End Do you want to delete? (Deleted part will not be restored.) 00:00:10 Yes End Delete ENTER RETURN No Return EXIT
MOVE Tist List No. 03 Start End

00:00:02

00:00:00 00:00:02
Press the buttons to select Yes, then press the ENTER button. The selected section has been deleted. To return to the Title List screen, press the buttons to select Return.
The length of the section to be deleted must be at least 5 seconds long. If the length of the section to be deleted is less than 5 seconds, you will be prompted with the message 'The range is too short.'. If the end time precedes the starting time, you will be prompted with the message End point cannot be marked earlier than start point. The section cannot be deleted when it includes a still picture. Press the MENU button after the operation has finished. The Title List screen will disappear.
1 Playback bar 2 Playtime 3 Section deletion starting point window and time 4 Section deletion end point window and time Select the start and end points of the section you want to delete using the playback related buttons. Playback related buttons: (II,I , ,).

74 - English

Page 75

Editing a Chapter

You can make your own chapters on DVD+RWs and edit them using the Chapter Edit menu.
Chapter Edit Screen Elements

DVD+RW Chapter Edit

DVD+RW JAN/01/2006 No. Title Title List 1/4 Length Edit 01 JAN/01/2006 12:00 00:04:JAN/01/2006 12:30 00:01:JAN/01/2006 01:00 00:49:Free Space 01:13:08

Chapter : 1/3 Show

00:00:00 Add MOVE Delete Hidden Delete All RETURN Return EXIT
1. Current chapter number and status 2. Playback bar 3. Playtime 4. Chapter Edit menu

Adding a chapter

Press the buttons to select a title containing a chapter you want to edit, then press the ENTER or button.
DVD+RW JAN/01/2006 No. Title Title List 3/4 Length Edit Play 01 JAN/01/2006 12:00 00:04:48 Rename 02 JAN/01/2006 12:30 00:01:JAN/01/2006 01:00 00:49:57 Delete 04 Free Space 01:13:08 Protection Chapter Edit Divide Title

Timer recording does not work properly.

Cannot record.

I pressed the REC button but there is no response. I forget the password for parental lock.
Press and hold the CH ( / ) button on the front panel of your unit for more than 5 seconds with no disc, and then press the POWER OFF/ON button. All settings including password will revert to factory settings. Do not use it if not absolutely required. (Note that this function is available only when there is no disc inserted.) Check whether the disc is inserted correctly with the label facing up. Check the regional code of your DVD disc. This DVD Recorder & VCR cannot playback some types of disc. (See page 5.) Are you watching a program in slow or skip mode? If you are playing a program at a speed other than normal speed, sound is not output. (Except for forward search Playback (Fast1)) Check the connections and initial settings. Check whether the disc is damaged. Clean up the disc, if necessary. Check whether the disc is inserted correctly with the label facing up.

Cannot play the disc.

No sound.

English - 91

Page 92

Troubleshooting (DVD)

Problem icon appears on the screen. Play mode settings are different from the settings configured with the Setting menu. Cannot change the aspect ratio. No audio output. No video or audio output. The disc tray is ejected after 2 to 5 seconds. Angle operation does not work during playback of a DVD disc. The disc revolves, but no image or bad quality images are output.
Explanation/Solution You cannot use the operation or function due to one of the following reasons: (1) Your DVD disc does not support the feature (for example, angles) (2) You've requested a title, chapter, or scan time that is out of the correct range. The disc does not support all the selected functions. In this case, some settings you configure on the Setting menu may not work properly.
Aspect ratio is fixed for DVD disc.
Check whether you selected correct digital output options in the Audio Output Options menu. Did you move your DVD Recorder & VCR suddenly from a cold place to a warm place? In this case, do not connect the plug to the power outlet and wait for two hours. Then insert the disc and try to play back again. It will work properly when condensation has evaporated. Angle operation is available only when the disc contains images captured at different angles.
Check whether there is damage or foreign materials on your disc. Some discs with bad manufacturing quality may not be played back. If the scene changes from dark to bright suddenly, the screen may jitter temporarily, but it is not a defect. Sound languages and subtitle languages are disc-specific. Only the sound and subtitle languages contained on a DVD disc are available and displayed on the disc menu.

Beocompatible Operation via Oneremote Interface Type 2583

Samsung

DVD-SH875 / DVD-SH877 and more.

Side 4

Type 2583u1uk
made in the EU by www.oneremote.dk
Congratulations With the interface module INT2 from www.oneremote.dk installed inside your recorder and connected to a Bang & Olufsen TV you can operate the recorder with your Bang & Olufsen remote control Beo4 or Beo5. Other remote controls will not be able to fully control the recorder. This user guide tells you how.
Operating with Beo4 or Beo5 Beo4 does not have as many keys as the players original remote control. Thus certain Beo4 keys have got alternative functionality. To get to this Ohas to be pressed first, i.e. Ofollowed by O on a Beo4 corresponds to OK on the original remote control. The table shows how special Beo4 key operations translate to operations of the original remote control. To be able to operate the recorder correctly with the Beo4 the user has to be familiar with operations with the original remote control as described in the recorders user manual. Turn on the recorder The recorder is automatically turned on when selecting its source on the TV with Vmem, Vaux, Vtape, DTV, DVD, Vaux etc. Turn off the recorder Turn off the recorder using w Coloured function keys As the coloured keys have all been assigned to new direct functions, a O has to be entered previous, to get the coloured function. OQ OW OE OR Green Yellow Red Blue
Daily operations OO Q E W R

o1 o2 o3 o4 o5 o6 ee

Recording operations Enter DTV / Analog Return P+ PDVD HDD MENU Title list Play list Fav list

Exit oe o8 eq e9

Timer REC OTR REC pause/ Timeshift REC mode

Special operations

o0 o7 o9 e0 e1 e2 e3
Plug and Play The recorder can be connected directly to a vacant linkequipped AV socket on the Bang & Olufsen TV. Following the correct programming of the AV connection the receiver is ready to operate. For programming of the AV connection, check the Bang & Olufsen TV User Manual. Bang & Olufsen Remote Controls With your beocompatible* DVD recorder connected to a Bang & Olufsen TV you may operate it with your Beo4 or Beo5 remote control. Operation in a Beolink Videosystem In a Bang & Olufsen Beolink videosystem full operability is ensured in all link rooms.
*Beocompatible means that the equipment can be operated with a Bang & Olufsen remote control when connected to a Bang & Olufsen TV.

Text Guide USB

Info Subtitles Audio Marker
Playback mode When a playback is started with O, the arrow buttons changes function from being used to manoeuvre in menus:

o q oq

Play press 1 second Stop Pause Next Previous Rewind FF Returns the arrow buttons to manoeuvre in menus.

D F A S E or OO

Side 2

Side 3