00995A-VR330_XAA-Eng1

2006.2.27

3:6 PM

Page 1

Instruction Manual

DVD-VR330

www.samsung.com

English

AK68-00995A-01

Page 2

Warning

Getting Started
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product.
Do not install this equipment in a confined space such as a bookcase or similar unit. WARNING : To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture. CAUTION : This DVD Recorder & VCR USES AN INVISIBLE LASER BEAM WHICH CAN CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE RECORDER CORRECTLY AS INSTRUCTED. CAUTION THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. CAUTIONS Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Attention: Pour viter les chocs lectriques, introdure la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond. This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections. FCC NOTE (for U.S.A): This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Caution: FCC regulations state that any unauthorized changes or modifications to this equipment may void the users authority to operate it. This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere. This DVD Recorder & VCR is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not correspond to the Region number of this , the DVD Recorder & VCR cannot play the disc. This device is protected by U.S. Patent Nos.4,631,603;4,577,216;4,819,098;4,907,093; and 6,516,132. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision,and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. This product is covered by one or more of the following U.S. patents: 5,034,830 5,060,200 5,457,669 5,561,649 5,691,858 5,705,762 5,987,417 6,043,912 6,222,983 6,272,096 6,377,524 6,377,531 6,385,587 6,389,569 6,389,570 6,408,408 6,466,532 6,473,736 6,477,501 6,480,829 6,556,520 6,556,521 6,556,522 6,594,208 6,674,697 6,674,957 6,721,493 6,728,474 6,741,535 09/610381 09/610695

Disc Specifications

DVD-Video
A digital versatile disc (DVD) can contain up to 135minutes of images, 8 audio languages and 32 subtitle languages. It is equipped with MPEG-2 picture compression and Dolby 3D surround, allowing you to enjoy vivid and clear theater quality images in the comfort of your own home. When switching from the first layer to the second layer of a double-layered DVD Video disc, there may be momentary distortion in the image and sound. This is not a malfunction of the unit. Once a DVDR/DVD-RW(V) recorded is finalized, it is playable in a standard DVD player.
DVDR Disc Playback and Recording
Once a DVDR recorded is finalized, it is playable in a

standard DVD player.

You can record onto the available space on the disc and
perform editing functions such as giving titles to discs and programs and erasing programs before finalizing. When programming is erased from a DVDR, that space does not become available. Once an area on a DVDR is recorded on, that area is no longer available for recording, whether the recording is erased or not. It takes about 30 seconds for the unit to complete recording management information after recording finishes. This product optimizes the DVDR for each recording. Optimizing is carried out when you start recording after inserting the disc or turning on the unit. Recording onto the disc may become impossible if optimizing is carried out too many times. Playback may be impossible in some cases due to the condition of recording. This unit can play back DVDR discs recorded and finalized with a Samsung DVD video recorder. It may not be able to play some DVDR discs depending on the disc and the condition of the recording.

Audio CD

An audio disc on which 44.1kHz PCM Audio is recorded. Plays CD-DA format audio CD-R and CD-RW discs. This
unit may not be able to play some CD-R or CD-RW discs due to the condition of the recording.

CD-R/-RW

MP3 CD-R/-RW Only CD-R discs with MP3 files recorded with
ISO9660 or JOLIET format can be played back
Only MP3 files with the "mp3" or "MP3" extension can

be used.

DVD-RW Disc Playback and Recording
Recording and playback can be performed on DVDRW discs in both Video and VR Modes.
For MP3 files recorded with a VBR(Variable Bit
Rates), from 80 Kbps to 320 Kbps, the sound may cut in out. Playable bitrate range is from 56Kbps to 320Kbps. The unit can handle a maximum of 1000 files and folders. DVD-RAM/RW/R discs that contain MP3 files can be played back.

Clock Set No Disc Timer Rec. Setup Clock Data CH Time Zone Daylight Saving Automatic Atlantic Eastern Central Mountain Pacific Alaska Hawaii RETURN EXIT

EXIT MOVE ENTER

30 - English

Page 31

Daylight Saving
Press the buttons to select Yes or No, then press the ENTER or button. Select Automatic to set the daylight saving automatically.
No Disc Timer Rec. Setup Clock Data CH Time Zone Daylight Saving : Automatic : Automatic : Automatic Automatic Yes No

Clock Set

Press the buttons to select Manual Clock Set, then press the ENTER or button.

Manual Clock Set

If Auto Setup fails to set the DVD Recorder & VCRs internal clock by locating a local TV station, follow these steps to set the date and time manually. For accurate Timer Recording, your DVD Recorder & VCR's internal clock must be set correctly. With the unit in Stop mode/No Disc mode, press the MENU button.

No Disc

Timer Rec. Setup Month Day 01 SUN Press numeric keys or keys. 01 Year 2006 Hour Minute AM/PM AM
Press the buttons to select the Current Date and Time, then press the ENTER button. When the current time is stored in memory and then the set is powered off, the current time will appear in the front panel display.
: Sets the value You can set the value using the number (0~9) buttons. : Moves to items

English - 31

Page 32

Channel Set

Press the buttons to select Antenna/Cable TV, then press the ENTER or button.
No Disc Timer Rec. Setup Antenna/Cable TV AntennaTV : Cable Auto Channel Memory Cable TV Channel Add/Delete RF Output Channel : CH3
This feature allows you to manually set the DVD Recorder & VCRs tuner band to Antenna or Cable, whichever you connected to the Antenna In jack during initial setup. Use this setting only if Auto Setup detected the incorrect tuner band, i.e. channels are coming in on the wrong channel numbers.
Select the Antenna or Cable TV(Signal Source) that matches the antenna connection you selected on pages 15~17. Antenna - Select this if the DVD Recorder & VCR is connected to an indoor or outdoor VHF/UHF antenna. (See pages 15, 17) Cable TV - Select this if the DVD Recorder & VCR is connected to a cable TV. (See page 16)

Dynamic Compressiom : On

Press the buttons to select the desired audio option, then press the ENTER or button.
Press the buttons to select the desired item, then press the ENTER or button.
previous menu. Press the MENU button to exit the menu.

English - 35

Page 36
Setting Up the Display(Video) Options
This function allows you to setup the TV screen settings.

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio) 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. 4:3 Pan & Scan : Select this for a conventional size TV when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.) 16:9 Wide : You can view the full 16:9 picture on your wide-screen TV.

Input Level

Adjusts the level of the input signal.
Darker : If you feel the screen is too light
Press the buttons to select Video, then press the ENTER or button. Video option menu will be displayed.
No Disc Timer Rec. Setup TV Aspect Input Level Black Level : 16:9 Wide : Darker : 7.5 IRE
and you want to make the screen darker. Lighter : If you feel the screen is too dark and you want to make the screen lighter.

Black Level

Adjusts the black level of the screen. 7.5 IRE : This will enhance the black level for increased brightness/contrast when viewing DVDs. Select this when you want to make the screen lighter. 0 IRE : This is the standard NTSC reference black level for consistent brightness/contrast across all sources. Select this when you want to make the screen darker.

3D Noise Reduction : Off

Press the buttons to select the desired video option, then press the ENTER or button.

3D Noise Reduction

Off : Normal On : Select to remove noise from the screen.
Press the RETURN or button to return to the previous menu. Press the MENU button to exit the menu.

Enter the password

System Clock Set Channel Set Language Audio Video Parental Control
Enter the 4-digit password using the number buttons on the remote control. The Confirm the password message will be displayed.
No Disc Timer Rec. Setup Confirm the password Change Password
Press the buttons to select System, then press the ENTER or button.
No Disc Timer Rec. Setup VCR Video Input Chapter Creator : AV 1 : Off DVD EP Mode Time : 6 Hours Quick Recording : Off

System

Enter your password again.
Press the buttons to select VCR, then press the ENTER or button.
No Disc Timer Rec. Setup Tape Length Auto Play Auto Repeat : T120 : On : Off

38 - English

Page 39
Press the buttons to select the desired VCR option, then press the ENTER or button.

Video Input

Tape Length
This information is usually printed on the tape box. The menu cycles through: T-120, T-160 or T-180. Once the type of cassette is set, the VCR can display the amount of time remaining on the tape when you press the INFO button.
No Disc Timer Rec. Setup Tape Length Auto Play Auto Repeat T120 T160 On T180 Off
You can watch video from an external component through the AV 1(Composite) or S-video input jacks.

Auto Play

If you want your videotapes to play automatically when you insert them, turn on Auto Play. Off : Auto play is disabled. On : The VCR will automatically begin playing a video tape when it is inserted, as long as the safety tab of the cassette has been removed.
No Disc Timer Rec. Setup Tape Length Auto Play Auto Repeat : T120 : Off On : On Off
No Disc Timer Rec. VCR Video Input Chapter Creator : AV 1 : Off DVD EP Mode Time : 6 Hours Quick Recording : Off

Auto Repeat

It sets the VCR to play a tape repeatedly (unless a tape control is activated :Stop, Fast Forward or Rewind).
No Disc Timer Rec. Setup Tape Length Auto Play Auto Repeat : T120 : On : Off Off On
Press the buttons to select Video Input, then press the ENTER or button.
No Disc Timer Rec. Setup VCR Video Input Chapter Creator :AV 1 AV 1 : Off DVD EP Mode Time :S-Video 6 Hours

DVD-RW

VIDEO AUDIO

5 (4.7GB)

Single layer(5) (4.7GB) DVD-R VIDEO AUDIO Dual layer(5) (8.5GB)

N VCR Playback

Playing the VCR...55 Tracking....55 Special VCR Playback Features..56 S-VHS Playback...56 Variable Search System...56

DVD+RW

Single layer(5) (4.7GB) DVD+R VIDEO AUDIO Dual layer(5) (8.5GB)

42 - English

Max. Playing Time or minute. 1 hr (XP: Excellent Quality) 2 hrs (SP: Standard Quality) 4 hrs (LP: Long Playback) 6 hrs or 8 hrs (EP:Extended) 2 hrs (XP: Excellent Quality) 4 hrs (SP: Standard Quality) 8 hrs (LP: Long Playback) 12 or 16 hrs (EP:Extended) 1 hr (XP: Excellent Quality) 2 hrs (SP: Standard Quality) 4 hrs (LP: Long Playback) 6 or 8 hrs (EP:Extended) 1 hr (XP: Excellent Quality) 2 hrs (SP: Standard Quality) 4 hrs (LP: Long Playback) 6 or 8 hrs (EP:Extended) 2 hrs (XP: Excellent Quality) 4 hrs (SP: Standard Quality) 8 hrs (LP: Long Playback) 11 or 15 hrs (EP:Extended) 1 hr (XP: Excellent Quality) 2 hrs (SP: Standard Quality) 4 hrs (LP: Long Playback) 6 or 8 hrs (EP:Extended) 1 hrs (XP: Excellent Quality) 2 hrs (SP: Standard Quality) 4 hrs (LP: Long Playback) 6 or 8 hrs (EP:Extended) 2 hrs (XP: Excellent Quality) 4 hrs (SP: Standard Quality) 8 hrs (LP: Long Playback) 11 or 15 hrs (EP:Extended)

Page 43

Discs that cannot be played
DVD-Video with a region number other than 1 or ALL 3.9 GB DVD-R Disc for Authoring. A DVDR/DVD-RW(V) disc which has been recorded and not finalized in a different manufacturer's recorder. PAL discs DVD-ROM/PD/MV-Disc/ DivX Video Disc, etc Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I This DVD Recorder & VCR can only operate with discs that are compatible with DVD-RAM Standard Version 2.0. Playback and/or recording may not work for some types of discs or when specific operations, such as angle change and aspect ratio adjustment, are being performed. Information about the disc is written in detail on the box. Please refer to this if necessary. Do not allow the disc to become dirty or scratched, fingerprints, dirt, dust, scratches and deposits of cigarette smoke on the recording surface may make it impossible to use the disc for recording. DVD-RAM/RW/R discs may not be able to play on some DVD players, depending on the player, disc and the condition of the recording. Discs with PAL programs recorded on them cannot be played using this product.
Press the OPEN/CLOSE button.
Place a disc gently into the tray with the discs label facing up. Press OPEN/CLOSE button to close the disc tray. Your DVD Recorder & VCR closes the disc tray and plays the disc automatically. The recorder does not play discs automatically after being powered on initially. When the recorder is powered on and a disc is in the tray, the unit will be activated and wait in stop status. Press the PLAY button to start playback.
Press the STOP button to stop playback.

For DVD-RAM/DVDRW/DVDR disc
Press the TITLE LIST button to display title list.
Skipping Chapters or Tracks
During the playback, press the l or l button on the remote control.
Title List : The Title List is simply a list of titles on a disc. If a title is deleted, that title cannot be played again. Playlist (DVD-RAM/-RW(VR)) : A playlist is a custom-made list of titles. When one playlist is played, only the titles within the playlist will play and then stop. Even if that playlist is deleted, the original recording will not be deleted.
If you press the l button If you press the l button, it moves to the beginning of the chapter, track or marker(DVD-RAM, DVD-RW(VR mode) ). Pressing the button once again within 3 seconds returns to the beginning of the previous chapter, track or marker(DVD-RAM, DVD-RW(VR mode) ).
If you press the l button If you press the l button, it moves to the next
chapter, track or marker(DVD-RAM,DVD-RW (VR mode) )
Skipping ahead 30 seconds
During the playback, press F.ADV/SKIP button to skip ahead exactly 30 seconds.

44 - English

Page 45
Slow Motion Play/ Step Motion Play
Slow Motion Play (DVD-VIDEO / DVD-RAM / DVDRW / DVDR)

About ANYKEY

The ANYKEY functions allows you to easily search for a desired scene by accessing title, chapter or time. You can also change the subtitle and audio settings and set some features including Repeat, Angle and Zoom.
During pause mode, press the SEARCH or button on the remote control for more than 1 second. Each time you press the button : l Slow 1 l Slow 2 l Slow 3 Each time you press the button : l Slow 1 l Slow 2 l Slow 3 To return to normal speed playback, press the ll button.
Moving to a scene directly using the ANYKEY
If you want to move to a title or a chapter to find a desired scene.
Press the ANYKEY button during playback.
Step Motion Play (DVD-VIDEO / DVD-RAM / DVDRW / DVDR)
Press the buttons to select Title, Chapter.

Title Chapter Time

1/2 1/28 00:00:01 ENG ENG Off 1/1 Off D 5.1CH
During pause mode, press the F.ADV button on the remote control. Each time the button is pressed, a new frame will appear. To return to normal speed playback, press the ll button.
Subtitle Audio Repeat Angle Zoom

CHANGE

No sound is heard during Step or Slow mode.
Press the buttons or number (0~9) buttons to select the desired scene. Then, press the ENTER button.

English - 45

Page 46
If you want to move to a desired time to help you find a scene.
Select repeat mode using button. Press the ENTER button. To make the screen disappear, press the ANYKEY or RETURN button. DVD-RAM/DVD-RW(VR mode), unfinalized DVDR and unfinalized DVD-RW (Video mode) do not repeat a chapter.
Press the buttons to select Time.

Press the buttons to select a picture.

JPEG JPEG01

Photo List 01/10

JPEG01

JPEG02

JPEG03

JPEG04

JPEG05

JPEG06

JPEG07

If you selected a wrong track, press the button, then press the buttons to select the wrong track. Press the CANCEL button. The wrong track will be removed.

Slide Show

To see the next 8 pictures, press the l button. To see the previous 8 pictures, press the l button.

Playlist 03/03

TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 TRACK TRACK 1 TRACK 2 TRACK 3
Press the PLAY button to play the playlist.

54 - English

Page 55
If you press the ll button, the Slide Show Speed screen will appear. Press the buttons to set the slide show speed, then press the ENTER button.

DVD-RW(VR)

Playing the VCR
Slide Show Speed Slow Normal Fast
JPEG01 MOVE PHOTO ENTER RETURN
Insert a standard VHS tape into the VCR deck. When a tape is inserted, power will turn on automatically.
Press the ENTER button with a picture selected in the Album screen and select a display mode (Album screen ( ), Slide show ( ), Rotation ( ) or Zoom ( )) using the buttons, then press the ENTER button.
Press the II(PLAY/PAUSE) button on the remote control or on the front panel of the unit. The videotape will begin to play automatically if the Record Safety Tab is removed and Auto Play is turned on.

Record Safety Tab

Press the (STOP) button on the remote control or on the front panel of the unit.
: Returns to the Album screen. : The unit enters slide show mode. Before the slide show can begin, the picture interval (Slide show speed) must be set. : Each time the ENTER button is pressed, the picture rotates 90 degrees clockwise. : Each time the ENTER button is pressed, the picture is enlarged up to 4X(four times the normal size). normal size 2X 4X 2X Press the ANYKEY button to display menu bar. Press the RETURN button to clear the menu bar.

Tracking

The Tracking adjustment removes the white lines that sometimes appear during playback because of slight differences in recording decks. The CH/TRK ( / ) button will automatically align the recorded tracks with the playback heads to solve this problem. You may also set tracking manually.

When using a DVD-RW disc, you can change the mode. Refer to Formatting a Disc on page 86.
DVD-RW(VR) Title List Playlist Disc Name Disc Protection : : Not Protected

EP (extended mode) AUTO

Disc Manager
Disc Format : DVD-VR Disc Manager Choose the recording format for DVD-RW Disc Finalize Timer Rec. Setup Copy MOVE ENTER RETURN Delete All Title Lists DVD-VR DVD-V
- The dual layer DVDRs have approximately double the capacity of single layer DVDRs. (See page 42.)

Unrecordable video

Pictures with copy protection cannot be recorded on this DVD Recorder & VCR. When the DVD Recorder & VCR receives a copy guard signal while recording, recording stops and the following message appears on the screen.
DVD-R: Initializing disc is unnecessary.

DVD-RW(Video mode)/-R

Chapters will be created automatically when you finalize recording on DVD-R/DVD-RW discs in Video mode. Simple editing (erasing titles/changing title name).

DVD-RAM/-RW(VR mode)

This mode involves multiple editing functions (such as deletion of the whole title, partial deletion of a title, etc.). Various editing options using a created Playlist.
You cannot record copy protected movie.

English - 59

2006.3.3

5:31 PM

Page 60
Concerning Copy Control Signals
TV broadcasts that contain copy control signals may have one of the following three signal types, Copy-Free, CopyOnce and Copy-Never. If you want to record a copy-once type program, use DVD-RW with CPRM in VR Mode or DVD-RAM discs.
Press the CH/TRK ( / ) buttons or number buttons to select the channel you want to record. Press the REC SPEED button repeatedly, to select the recording speed (quality). XP(High, approx. 1 hour) SP(Standard, approx. 2 hours) LP(Low, approx. 4 hours) EP(Extended Play, approx. 6 hours/8hours)
DVD-RW(Ver.1.1) DVD-RW(Ver.1.1) with CPRM VR mode DVD-R DVD-RAM(Ver.2.0) DVD+R DVD+RW

Copy-Free O

Copy-Once -

Copy-Never -

O O O O O

O* O* -

Recordable Time 00:26
Once Copy Once has been recorded, additional recording cannot be performed. * compatible with CPRM. - Content Protection for Recordable Media (CPRM) CPRM is a mechanism that ties a recording to the media on which it is recorded. It is supported by some DVD recorders, but not by many DVD players. Each blank recordable DVD has a unique 64-bit media ID etched in the BCA(Burst Cutting Area). When protected content is recorded onto the disc, it can be encrypted with a 56-bit C2 (Cryptomeria) cipher derived from the media ID. During playback, the ID is read from the BCA and used to generate a key to decrypt the contents of the disc. If the contents of the disc are copied to other media, the ID will be absent or wrong and the data will not be decryptable.

The DV device is connected. MOVE SELECT RETURN
Select the Play icon on the upper part of the screen to playback the camcorder and find the starting position to copy. To start recording, Press the button to select rec(G) icon in the top side of the screen, then press the ENTER button. You can press the REC button on the remote control to start recording. To display playback related icons on the screen, press either direction button on the remote control. Press the STOP button on your DVD Recorder & VCR when the recording is finished. Some camcorders may not work with your DVD Recorder & VCR even if they have a DV output jack. Also refer to the user manual for your camcorder when recording through the DV jack.
Also refer to the user manual for your External Devices when recording through AV In jacks on the DVD/VCR using Audio/Video cable. You can record an external source through S-Video cable. (see page 24). For more information on changing the Video Input from AV1 to S-Video, see page 39(Video Input).

English - 61

Page 62
Making a One Touch Recording (OTR)
One-Touch Recording (OTR) allows you to add recording time in preset increments up to 4 hours by pressing the REC button repeatedly.

Making a Timer Recording

The clock (Setup Clock Set) must be set before proceeding with a timer recording. (See page 30)
Press the CH/TRK ( / ) buttons or number buttons to select the channel to record. If you want to record through a connected external component, press the INPUT SEL. button to select an appropriate external input(AV1, AV2 or DV). CATV channel: 1 to 125 TV channel: 2 to 69
Press the OPEN/CLOSE button, and place a recordable disc on the disc tray.
Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display.
Press the REC button to start recording.
With the unit in Stop mode, press the MENU button.
While in Record mode, press the REC button again to activate the One-Touch Recording (OTR). Record length 0:30 appears on the On-Screen Display and the DVD Recorder & VCR will record for exactly 30 minutes.
Press the buttons to select Timer Rec., then press the ENTER or button.
DVD-RAM(VR) Title List Playlist Disc Manager Timer Record Scheduled Record List
Continue pressing REC button to add recording time in preset increments up to 4hours. 0:30 1:00 1:30 2:00 3:00 4:00 Off The DVD Recorder & VCR stops recording automatically when the time has elapsed.
Timer Rec. Setup Copy MOVE ENTER RETURN EXIT
To stop recording Press the STOP ( ) button. The message Press STOP button once more to cancel Timer Record. is displayed. Press the STOP ( ) button again. The message Updating the Information of disc. Please wait for a moment. is displayed.

DVD-->VCR

Press the buttons to select Edit Copylist, then press the ENTER or button.
DVD-RAM(VR) No. Title Length Edit 01 JAN/01/2006 12:0 00:00:JAN/01/2006 12:0 00:00:09 Edit Copylist
Copy function is not allowed in progressive scan mode.

English - 67

Page 68

To copy from VCR to DVD

With the unit in Stop mode, press the MENU button in stop mode. Press the buttons to select Copy, then press the ENTER or button.
You can use the II, I or I, or buttons to search for the end position. Press the ENTER button at the end point. A copylist will be generated. Repeat the above steps to create the copylist. In VCR mode, the copylist cannot be saved.
DVD-RAM(VR) No. Start : 00: : : End 00:03:45 : : Edit

VCR-->DVD

Copy 00:01:07 FF Copy All MOVE ENTER RETURN EXIT
DVD-RAM(VR) No. Start : 00: : : End 00:03:45 Play : Copy : Delete 00:01:07 Edit
Press the buttons to select VCR-->DVD, then press the ENTER or button.
DVD-RAM(VR) No. Start 01 : : End : : Edit
STOP Copy All MOVE ENTER RETURN EXIT
00:00:00 STOP Copy All MOVE ENTER RETURN EXIT
You can use the II, I or I, or buttons to search for the Start position. Press the ENTER button at the start point.
DVD-RAM(VR) No. Start : 00: 37 End : : Edit
00:01:07 VCR-->DVD RPS Copy All MOVE ENTER RETURN EXIT
00:01:07 FF Copy All MOVE ENTER RETURN EXIT
The VCR will fast forward, searching for a start position and then automatically start a copy. The Start and End points may not match up exactly. If you want to copy all content, select Copy All.

Direct copy VCR to DVD

Insert the VHS tape you want to copy. Insert a recordable DVD disc. Press DVD copy button on front panel or remote control(TO DVD). To stop recording press the STOP button.

68 - English

Page 69

Playing the Title List

This section introduces basic functions of DVD editing and explains both edit functions for the recording on a disc and edit functions for the entire disc. Follow these instructions to play back a scene from the Title List.
Using the TITLE LIST button
Press the TITLE LIST button. The Title List screen is displayed.
DVD-RAM(VR) JAN/01/2006 No. Title 12:00 12:30 01:00 01:JAN/01/JAN/01/JAN/01/JAN/01/2006 00:00:11 00:00:09 00:01:36 00:00:11 Title List 1/4 Length Edit
JAN/01/2006 12:00 AM CH1 JAN/01/2006 SP
Playing the Title List..69 Basic Editing (Title List)...71 Renaming(Labeling) a Title..71 Locking(Protecting) a Title...72 Deleting a Title...73 Deleting a Section of a Title..73 Editing a Chapter...75 Dividing a Title...77 Advanced Editing (Playlist)..78 Creating a playlist...78 Playing Titles in the Playlist..79 Renaming a Playlist Title..79 Editing a Scene for the Playlist..80 Copying a Playlist Title to the VCR..83 Deleting a Playlist Title from the Playlist..84 Disc Manager..84 Editing the Disc Name...84 Disc Protection...85 Formatting a Disc..86 Finalizing a disc...86 Unfinalizing a disc (V/VR mode)..87 Delete All Title Lists...88 Edit Compatible...89

Press the buttons to select Rename, then press the ENTER or button. The Rename screen is displayed.
DVD-RAM(VR) JAN/01/2006 01:00 AM CH1 Rename

EXIT Back Space

Save Space ENTER Delete RETURN Clear EXIT

Press the ENTER button.

English - 71

Page 72

Select the desired characters using the buttons, press the ENTER button.
DVD-RAM(VR) Sport(A1) Rename
Locking(Protecting) a Title
Follow these instructions to lock a title to protect it from accidental deletion.
Save Back Space MOVE Space ENTER Delete RETURN Clear EXIT
DVD-RAM(VR) Title List 1/4 No. Title 12:00 12:30 01:00 01:30 Length Edit 00:00:11 00:00:09 00:01:36 00:00:11
Back Space: Moves the cursor one position backwards. Space: Enters a blank and moves the cursor one forward (to the right). Delete: Deletes the character at the cursor position. Clear: Deletes all the character inputs. Save: Registers the character inputs. Press the buttons to select Save, and then press the ENTER button. The changed title name is displayed in the title field of the selected title.
DVD-RAM(VR) Sport(A1) No. Title Title List 3/4 Length Edit 01 JAN/01/2006 12:00 00:00:JAN/01/2006 12:30 00:00:Sport(A1) 00:01:JAN/01/2006 01:30 00:00:11
Press the buttons to select a title you want to protect in the Title List, then press the ENTER or button.
JAN/01/2006 12:00 AM CH1 JAN/01/2006 EP

Sport(A1) JAN/01/2006 XP

Press the buttons to select Protection, then press the ENTER or button.
DVD-RAM(VR) JAN/01/2006 Title List 5/31

Title Protection :

JAN/01/2006 12:00 AM CH1 JAN/01/2006 On Off
Press the buttons to select On, then press the ENTER button. The lock icon on the information window for the selected title changes to the locked status. ( )
DVD-RAM(VR) JAN/01/2006 No. Title 12:00 12:30 01:00 01:JAN/01/JAN/01/JAN/01/JAN/01/2006 00:00:11 00:00:09 00:01:36 00:00:11 Title List 3/4 Length Edit

72 - English

Page 73

Deleting a Title

Follow these instructions to delete a title from the Title List.
DVD-RW(Video mode),DVD+RW, DVDR : Since Playlist is not present, the message Do you want to delete? is displayed.

Press the buttons to select Copy, then press the ENTER button. The title you choose is played and copied to VCR tape.

Dolphin 2 Scene

Press the buttons to select Delete, then press the ENTER button.
DVD-Recorder DVD-RAM(VR) Scene No. 4/3 Edit Scene Playlist No. Play Modify 01 00:00:00:00:00:00:04 Move Add 04 00:00:03 MOVE 05 00:00:00 ENTER RETURN Delete EXIT 3
Press the MENU button after the operation has finished. The menu screen will disappear.
The playlist can contain up to 99 playlist titles.

English - 83

00995A-VR330_XAA-Eng3

12:9 PM

Page 84
Deleting a Playlist Title from the Playlist
Press the buttons to select Yes, then press the ENTER button. It automatically returned to the Edit Playlist screen after the delete operation has finished.

Deleting. (Please wait)

Dolphin 2 Scene JAN/01/2006 12:00 AM
01 JAN/01/2006 12:00 00:00:JAN/01/2006 12:30 00:00:09
JAN/01/2006 12:00 AM 3 Scene JAN/01/2006 12:00 AM
Press the buttons to select the title you want to delete from the Playlist, then press the ENTER or button. The Edit Playlist menu is displayed: Play, Rename, Edit Scene, Copy, Delete

Editing the Disc Name

Follow these instructions to give a name to a disc.
Press the buttons to select Delete, then press the ENTER button. You will be prompted with the delete confirmation message Do you want to delete?.
DVD-RAM(VR) Title List Playlist Disc Manager Timer Rec. Setup Title List
Copy MOVE ENTER RETURN EXIT

84 - English

3:19 PM

Page 85

Press the buttons to select Disc Manager, then press the ENTER or button.
DVD-RAM(VR) Title List Playlist Disc Manager Timer Rec. Setup Copy MOVE ENTER RETURN EXIT Disc Name Disc Protection Disc Format : : Not Protected :

Disc Protection

Disc Protect allows you to protect your discs from being formatted or deleted due to unintended operations.

Delete All Title Lists