The unit can handle a maximum of 1000 files and folders. Maximum size of progressive JPEG is 3M pixels. MOTION JPEG is not supported. DVD-RAM/RW/R discs that contain JPEG files can be

played back.

Using CD-R/-RW Use a 700MB(80 minutes) CD-R/-RW disc.
If possible, do not use a 800MB(90 minutes) or above disc, as the disc may not play back. If the CD-R/-RW disc was not recorded as a closed session, you may experience a delay in the early play-back time, and all recorded files may not play. Some CD-R/-RW discs may not be playable with this unit, depending on the device which was used to burn them. For contents recorded on CD-R/-RW media from CDs for your personal use, playability may vary depending on contents and discs.

Disc Specifications

DVD-Video
A digital versatile disc (DVD) can contain up to 135minutes of images, 8 audio languages and 32 subtitle languages. It is equipped with MPEG-2 picture compression and Dolby 3D surround, allowing you to enjoy vivid and clear theater quality images in the comfort of your own home. When switching from the first layer to the second layer of a double-layered DVD Video disc, there may be momentary distortion in the image and sound. This is not a malfunction of the unit. Once a DVDR/DVD-RW(V) recorded is finalized, it is playable in a standard DVD player.
DVDR Disc Playback and Recording
Once a DVDR recorded is finalized, it is playable in a

standard DVD player.

You can record onto the available space on the disc and
perform editing functions such as giving titles to discs and programs and erasing programs before finalizing. When programming is erased from a DVDR, that space does not become available. Once an area on a DVDR is recorded on, that area is no longer available for recording, whether the recording is erased or not. It takes about 30 seconds for the unit to complete recording management information after recording finishes. This product optimizes the DVDR for each recording. Optimizing is carried out when you start recording after inserting the disc or turning on the unit. Recording onto the disc may become impossible if optimizing is carried out too many times. Playback may be impossible in some cases due to the condition of recording. This unit can play back DVDR discs recorded and finalized with a Samsung DVD video recorder. It may not be able to play some DVDR discs depending on the disc and the condition of the recording.

Audio CD

An audio disc on which 44.1kHz PCM Audio is recorded. Plays CD-DA format audio CD-R and CD-RW discs. This

Quick Overview.14 Step 1: Connecting the Antenna Cable.15 Step 2 : Connecting the Video Cable.18 Step 3 : Connecting the Audio Cable.21 Step 4 : Connecting External Devices.24 Step 5 : Connecting the Power Cord.27 Step 6 : Preparing the Remote Control.27
Note to CATV system installer : This reminder is to call CATV system installers attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable title as practical.

14 - English

Page 15
Step 1: Connecting the Antenna Cable
There are several ways to connect your DVD Recorder & VCR. Select the antenna connection that best suits you below.
Antenna + DVD Recorder & VCR + TV : No Cable box
You can record non-scrambled channels by selecting the channel on the DVD Recorder & VCR. Also use this method if you watch channels without cable box.
If you are using an off-air antenna that has 300ohm twin flat leads, use an external antenna connector (300-75 ohm adaptor : not supplied) to connect the antenna to the DVD Recorder & VCR.
If you have two separate antennas (one VHF and the other UHF), use a UHF/VHF combineradaptor (available at most electronics shops) to connect the antenna to the DVD Recorder & VCR.

English - 15

Page 16
Antenna + Cable box + DVD Recorder & VCR + TV : Cable box with many scrambled channels
You can record channels by selecting the channel on the cable box. You cannot record one channel while watching another channel. Be sure that the cable box is turned on.

16 - English

Page 17
Antenna + DVD Recorder & VCR + Cable box + TV : Cable box with a few scrambled channels
You can record non-scrambled channels by selecting the channel on the cable box. You cannot record scrambled channels that require a cable box.

English - 17

Page 18
There are several ways to connect your DVD Recorder & VCR. Select one of the video connections on the following pages. You must use one of the following audio/video connections on this unit.
Connecting to a Video input jack
Connect a video(yellow) cable between the VIDEO(yellow) OUT jack on DVD Recorder & VCR and VIDEO(yellow) IN jack on the TV (or AV amplifier).

Audio/Video Cable

Yellow

White AUDIO

You will enjoy regular quality images. Connect audio cables(white and red) between the AUDIO OUT jacks on the DVD Recorder & VCR and AUDIO IN jacks on TV(or AV amplifier). (See pages 21 ~ 23)

18 - English

Press the buttons to select Channel Set, then press the ENTER or button.

English - 33

Page 34
No Disc Timer Rec. Setup System Clock Set Channel Set Language Audio Video Parental Control
Press the buttons to select RF Output Channel, then press the ENTER or button.
No Disc Timer Rec. Setup Antenna/Cable TV Channel Add/Delete RF Output Channel : CH3 CH4 : Antenna
Press the buttons to select Language, then press the ENTER or button. Language setup menu will be displayed.
No Disc Timer Rec. Audio Subtitle Disc Menu : Original : Automatic : English

Language

On-Screen Menu : English MOVE ENTER RETURN EXIT
Press the buttons to select CH3 or CH4, then press the ENTER or button. The message "Please tune your TV to channel 3 (4)" will appear on the screen. Change your TV channel to CH3 or CH4 to match the RF Output Channel of the DVD Recorder & VCR.
Press the buttons to select the desired language option, press the ENTER or button.
No Disc Timer Rec. Setup Audio Subtitle : Original Original
: English Automatic Franais Disc Menu : English Deutsch On-Screen Menu : English Espaol Italiano Nederlands Korean
Setting Up the Language Options
If you set audio, subtitle, disc menu and on-screen menu language in advance, they will come up automatically every time you watch a movie. If the selected language is not recorded on the disc, the original pre-recorded language is selected.
Audio: For the disc audio language. Subtitle: For the disc subtitles. Disc Menu: For the disc menu contained on the disc. On-Screen Menu: For the on-screen menu of your DVD Recorder & VCR.
Press the buttons to select the desired language, then press the ENTER or button.
I Press the RETURN or button to return to the
previous menu. Press the MENU button to exit the menu. I The selected language will only appear if it is supported on the disc.

34 - English

Page 35
Setting Up the Audio Options
Allows you to setup the audio device and sound status settings depending on the audio system in use.

Digital Output

1. PCM : Converts to PCM(2CH) 48kHz audio. Select PCM when using the Analog Audio Outputs. 2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using the Digital Audio Outputs. Be sure to select the correct Digital Output or no audio will be heard.

Title Chapter Time Subtitle Audio Repeat Angle Zoom
1/2 1/28 00:00:01 ENG ENG Off 1/1 Off 0~9 NUMBER D 5.1CH
Playing a Certain section Repeatedly (A-B Repeat Playback)
Enter the time in the sequence of hours, minutes, and seconds using the number buttons, then press the ENTER button. This may not work for some discs. When an Audio CD(CD-DA) or an MP3 disc is inserted, depending on the disc type, the information display may not be appear. The Time Search function does not operate in some discs. To make the screen disappear, press the ANYKEY button again.
Press the buttons to select Repeat.

Repeat Playback

Playing Repeatedly(Repeat Playback)
Press the button to select A-B, then press the ENTER button.
Press the ENTER button at the point where you want repeat play to start (A) and press it again at the point where you want the repeat play to stop (B). Repeat playback of the A-B section starts.

Repeat A-B A-B

- To return to normal playback DVD-VIDEO
Press the CANCEL button to return to normal playback.
If you set point (B) before five seconds has lapsed, the prohibition mark ( ) will appear. CDs do not support the Repeat A-B function.

46 - English

Page 47
Selecting the Subtitle & Audio Language
Selecting the SUBTITLE language
Subtitle languages may not work depending on the disc type. This is only available during playback.
Selecting the Audio language
Audio languages may not work depending on the disc type. This is only available during playback.

Using the AUDIO button

Press the AUDIO button during playback.

ENG Dolby Digital 5.1CH

Using the SUBTITLE button
Press the SUBTITLE button during playback.

Subtitle ENG

Press the buttons to select the desired subtitle language. To make the screen disappear, then press the CANCEL or RETURN button.
Press the AUDIO or buttons to select the desired audio language.

Using the ANYKEY button

Press the buttons to select Audio, then press the buttons to select the desired audio language.
Press the buttons to select Subtitle, then press the buttons to select the desired subtitle language.
Audio languages may be different because they are disc-specific. Some discs allow you to select the audio language for the disc menu only.

Tracking

The Tracking adjustment removes the white lines that sometimes appear during playback because of slight differences in recording decks. The CH/TRK ( / ) button will automatically align the recorded tracks with the playback heads to solve this problem. You may also set tracking manually.
Adjust Tracking Manually During playback, press the CH/TRK ( / ) buttons to remove white lines from the picture.

English - 55

Page 56
Special VCR Playback Features
While a videotape is playing, you can enjoy a variety of special playback features, including Still, Frame Advance, Skip, Slow motion, and more.

Variable Search System

Each time you record a cassette on this DVD Recorder & VCR, an index is automatically marked on the tape when recording is started. The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on the direction selected, the indexes are numbered as follows This DVD Recorder & VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa.
In Play mode, press II(PLAY/PAUSE)button to still a single frame.

Frame Advance

In Pause mode, press F.ADV/SKIP button to advance to the next frame.

Go To Zero

Use this feature when you want to search for the 0:00:00 counter position on a cassette.

Fps/Review

In Play mode, press Forward ()button or Rewind ()button to Fps/review at two speeds: Picture Search - Press and release repeatedly to advance the tape forward or backward at 2,3,5,7 times normal speed. Jet Search - Press and hold to advance the tape forward or backward at 7 times normal speed.
Press the CANCEL button at the point on the tape where you want to set the counter to 0:00:00. While a cassette is stopped, press the ANYKEY button.
VCR Go To Zero End Search Forward Intro Scan Reverse Intro Scan

MOVE SELECT

In Play mode, press F.ADV/SKIP button to cue ahead exactly 30 seconds. Press F.ADV/SKIP button repeatedly up to 4 times to cue ahead 2 minutes.

Slow motion

In Pause mode, press button for slow motion. Press the button repeatedly to vary slow motion speed from 1/5 to 1/30 of normal playback. Press the PLAY button twice to resume normal viewing.

S-VHS Playback

The DVD Recorder & VCR allows you to playback high quality S-VHS tapes.
Press the buttons to select Go To Zero, then press the ENTER button. The VCR will rewind or fast forward, searching for the 0:00:00 counter position, and then automatically stop at that position.

DVD-R: Initializing disc is unnecessary.

DVD-RW(Video mode)/-R

Chapters will be created automatically when you finalize recording on DVD-R/DVD-RW discs in Video mode. Simple editing (erasing titles/changing title name).

DVD-RAM/-RW(VR mode)

This mode involves multiple editing functions (such as deletion of the whole title, partial deletion of a title, etc.). Various editing options using a created Playlist.
You cannot record copy protected movie.

English - 59

2006.3.3

5:31 PM

Page 60
Concerning Copy Control Signals
TV broadcasts that contain copy control signals may have one of the following three signal types, Copy-Free, CopyOnce and Copy-Never. If you want to record a copy-once type program, use DVD-RW with CPRM in VR Mode or DVD-RAM discs.
Press the CH/TRK ( / ) buttons or number buttons to select the channel you want to record. Press the REC SPEED button repeatedly, to select the recording speed (quality). XP(High, approx. 1 hour) SP(Standard, approx. 2 hours) LP(Low, approx. 4 hours) EP(Extended Play, approx. 6 hours/8hours)
DVD-RW(Ver.1.1) DVD-RW(Ver.1.1) with CPRM VR mode DVD-R DVD-RAM(Ver.2.0) DVD+R DVD+RW

Copy-Free O

Copy-Once -

Copy-Never -

O O O O O

O* O* -

Recordable Time 00:26
Once Copy Once has been recorded, additional recording cannot be performed. * compatible with CPRM. - Content Protection for Recordable Media (CPRM) CPRM is a mechanism that ties a recording to the media on which it is recorded. It is supported by some DVD recorders, but not by many DVD players. Each blank recordable DVD has a unique 64-bit media ID etched in the BCA(Burst Cutting Area). When protected content is recorded onto the disc, it can be encrypted with a 56-bit C2 (Cryptomeria) cipher derived from the media ID. During playback, the ID is read from the BCA and used to generate a key to decrypt the contents of the disc. If the contents of the disc are copied to other media, the ID will be absent or wrong and the data will not be decryptable.
Press the REC button. is displayed on the screen and recording begins. Press the STOP button to stop or finish a recording in progress. The message Updating the information of disc. Please wait for a moment is displayed.

Pausing / Resuming

Press the REC PAUSE button to pause a recording in progress. Press the REC PAUSE button again during pause to resume recording. You can switch channels by pressing the CH/TRK ( / ) buttons while recording pauses.

Continue pressing REC button to add recording time in preset increments up to 4hours. 0:30 1:00 1:30 2:00 3:00 4:00 Off The DVD Recorder & VCR stops recording automatically when the time has elapsed.
Timer Rec. Setup Copy MOVE ENTER RETURN EXIT
To stop recording Press the STOP ( ) button. The message Press STOP button once more to cancel Timer Record. is displayed. Press the STOP ( ) button again. The message Updating the Information of disc. Please wait for a moment. is displayed.
Press the buttons to select Timer Record, then press the ENTER or button. You can go to the Timer recording screen directly by pressing the TIMER REC button. The Timer Recording screen is displayed.

DVD-RAM(VR) No.

To DVD
Scheduled Record List Current Time 1:05 AM Date

Date 01/01

Source

Source CH06

End Mode Edit

End Mode

No. 01

01:05 AM 03:05 AM SP

Recordable Time

00:45 SP

The timer counter decreases by the minute from 4:00 to 0:00, then the DVD Recorder & VCR stops recording.

62 - English

2:12 PM

Page 63

Fill in the items using the buttons. : Moves to the previous/next item, or 0~9 : To set or change items in the Scheduled Record List Menu. To : Select the media to record (DVD or VCR). Source : The video input source (AV 1, AV 2), or the broadcasting channel you want to make a timer recording from. Date: Date that the timer recording starts - There are three options when setting the date. see below:
! To make a recording on a specific date, press the
When you are recording at EP mode on a DVD-RW(V)/-R disc, it may not record for the full 6 or 8 hours because the unit uses the VBR(Variable Bit Rate) ENCODING system. For example, if you record a program with a lot of action, it uses a higher bit rate which in turn consumes more disc memory.
Recording mode (VCR) AUTO : Select when you want to set video quality automatically. The auto quality depends on remaining time of VCR tape. SP : Standard Play, for best picture quality. SLP : Super Long Play, for maximum recording time (3 times SP).
or number buttons until the date you want appears.
No. 01 To DVD Source CH06 Date 01/01 Start End Mode

03:05 AM 05:05 AM SP

@ To make a recording at the same time every day
(Mon-Fri), press the buttons until Mon-Fri appears:

Check Remaining Time

To Add Recording Time
Refer to the One-Touch Recording (OTR). (See page 62)
Press INFO button on the remote control. Following information will be displayed. (Current deck status, recording speed, remaining time, input channel, current time.)
Recording on the DVD and VCR at the same time
You can record on the DVD and VCR at the same time, but both modes must be set up to record separately. Press the DVD/VCR button to set the unit to DVD or VCR mode. Choose AV input mode (CH, AV1, AV2 or DV). for DVD or VCR. Choose REC mode for DVD or VCR. Press REC button for DVD or VCR.
STOP 00:01:06 XP Rem 00:26 CH6
STOP 00:01:32 SP Rem 01:41 CH6

Sun Jan 01. 2006

01:08 AM
Special Recording Features
While a recording is in progress, you can watch a different media, or add recording time in preset increments. (for example, you can watch VCR playback while recording from a DVD and vice-versa)
When the DVD Recorder & VCR is connected to your TV using an S-Video or component video cable, the video tape's playback screen will not be displayed during DVD recording. You cannot record different channels at the same time. The DVD and VCR cannot start recording at the exact same time. You must set one mode to start recording, then the other.

66 - English

Page 67

Copy to DVD or VCR

To copy from "Edit Copylist", you need to make a copylist in advance. Select "New Copylist" and create the new playlist. (See pages 78) If you want to copy directly, choose "Direct Copy". On DVD-RW(V)/DVD+RW/R disc, you can only use Direct copy function.
You can copy from the DVD to VCR or VCR to DVD. Check the remaining time on the tape and Disc.
Press the buttons to select desired copylist, then press the ENTER or button.
DVD-RAM(VR) Edit Copylist

To copy from DVD to VCR

JAN/01/2006 12:00 AM

No. Title

Length Edit Play 01 JAN/01/2006 12:0 00:00:11 Rename 02 JAN/01/2006 12:0 00:00:09 Edit Scene Copy Delete
1 Scene JAN/01/2006 12:00 AM
With the unit in Stop mode, press the MENU button. Press the buttons to select Copy, then press the ENTER or button.
DVD-RAM(VR) Title List Playlist Disc Manager Timer Rec. Setup Copy MOVE ENTER RETURN EXIT DVD-->VCR VCR-->DVD
Press the buttons to select Copy, then press the ENTER or button.
DVD-RAM(VR) No. Title Length Edit Play 01 JAN/01/2006 12:0 00:00:11 Rename 02 JAN/01/2006 12:0 00:00:09 Edit Scene Copy
JAN/01/2006 12:00 AM 1 Scene JAN/01/2006 12:00 AM

Edit Copylist

Press the buttons to select DVD --> VCR, then press the ENTER or button.
DVD-RAM(VR) Title List Playlist Disc Manager Timer Rec. Setup Copy MOVE ENTER RETURN EXIT New Copylist Edit Copylist Direct Copy

Direct copy DVD to VCR

Insert a DVD disc you want to copy. Insert a VHS tape. Press the VCR copy button on front panel or remote control (TO VCR). To stop recording, press the STOP button.

DVD-->VCR

Press the buttons to select Edit Copylist, then press the ENTER or button.
DVD-RAM(VR) No. Title Length Edit 01 JAN/01/2006 12:0 00:00:JAN/01/2006 12:0 00:00:09 Edit Copylist
Copy function is not allowed in progressive scan mode.

English - 67

Page 68

To copy from VCR to DVD

With the unit in Stop mode, press the MENU button in stop mode. Press the buttons to select Copy, then press the ENTER or button.
You can use the II, I or I, or buttons to search for the end position. Press the ENTER button at the end point. A copylist will be generated. Repeat the above steps to create the copylist. In VCR mode, the copylist cannot be saved.
DVD-RAM(VR) No. Start : 00: : : End 00:03:45 : : Edit

VCR-->DVD

Copy 00:01:07 FF Copy All MOVE ENTER RETURN EXIT
DVD-RAM(VR) No. Start : 00: : : End 00:03:45 Play : Copy : Delete 00:01:07 Edit
Press the buttons to select VCR-->DVD, then press the ENTER or button.
DVD-RAM(VR) No. Start 01 : : End : : Edit
STOP Copy All MOVE ENTER RETURN EXIT
00:00:00 STOP Copy All MOVE ENTER RETURN EXIT
You can use the II, I or I, or buttons to search for the Start position. Press the ENTER button at the start point.
DVD-RAM(VR) No. Start : 00: 37 End : : Edit
00:01:07 VCR-->DVD RPS Copy All MOVE ENTER RETURN EXIT
00:01:07 FF Copy All MOVE ENTER RETURN EXIT
The VCR will fast forward, searching for a start position and then automatically start a copy. The Start and End points may not match up exactly. If you want to copy all content, select Copy All.

Direct copy VCR to DVD

Insert the VHS tape you want to copy. Insert a recordable DVD disc. Press DVD copy button on front panel or remote control(TO DVD). To stop recording press the STOP button.

68 - English

Page 69

Playing the Title List

This section introduces basic functions of DVD editing and explains both edit functions for the recording on a disc and edit functions for the entire disc. Follow these instructions to play back a scene from the Title List.
Using the TITLE LIST button

Press the TITLE LIST button. The Title List screen is displayed.
DVD-RAM(VR) JAN/01/2006 No. Title 12:00 12:30 01:00 01:JAN/01/JAN/01/JAN/01/JAN/01/2006 00:00:11 00:00:09 00:01:36 00:00:11 Title List 1/4 Length Edit
JAN/01/2006 12:00 AM CH1 JAN/01/2006 SP
Playing the Title List..69 Basic Editing (Title List)...71 Renaming(Labeling) a Title..71 Locking(Protecting) a Title...72 Deleting a Title...73 Deleting a Section of a Title..73 Editing a Chapter...75 Dividing a Title...77 Advanced Editing (Playlist)..78 Creating a playlist...78 Playing Titles in the Playlist..79 Renaming a Playlist Title..79 Editing a Scene for the Playlist..80 Copying a Playlist Title to the VCR..83 Deleting a Playlist Title from the Playlist..84 Disc Manager..84 Editing the Disc Name...84 Disc Protection...85 Formatting a Disc..86 Finalizing a disc...86 Unfinalizing a disc (V/VR mode)..87 Delete All Title Lists...88 Edit Compatible...89
Press the buttons to select a title you want to play from Title List, and then press the PLAY button. The selected title will be played back. To stop title play, press the STOP button. To return the title list screen, press the TITLE LIST button.

Using the MENU button

DVD-RAM(VR) Title List Playlist Disc Manager Timer Rec. Setup Copy MOVE ENTER RETURN Title List

Title List

English - 69

12:0 PM

Page 70
Press the buttons to select Title List, then press the ENTER or button twice.
Title List Screen Elements
DVD-RAM(VR) JAN/01/2006 No.
The Title List screen is displayed.
JAN/01/2006 01:00 AM CH1 JAN/01/2006 XP

DVD-Recorder Title List

DVD-RW(VR) Title 12:00 12:30 01:00 01:JAN/01/JAN/01/JAN/01/JAN/01/2006 00:00:11 00:00:09 00:01:36 00:00:11 1/4 JAN/0

1/4 Length Edit

Length Edit Title No.
JAN/01/2006 12:00 00:00:JAN/01/2006 12:30 00:00:JAN/01/2006 01:00 00:01:JAN/01/2006 01:30 00:00:11 04

Rename Delete Edit

JAN/01/2006 12:00 AM CH1 JAN/01/2006
Protection ENTER EXIT EXIT

MOVE RETURN

Press the buttons to select a Title, then press the ENTER or button. The Edit menu is displayed:Play, Rename, Delete, Edit, Protection(See pages 71~74)
DVD-RAM(VR) JAN/01/2006 No. Title 01 JAN/01/JAN/01/JAN/01/JAN/01/2006 12:00 00:00:11 12:30 00:00:09 Play 01:00 00:01:36 Rename 01:30 00:00:11 Delete Edit Protection ENTER RETURN EXIT Title List 3/4 Length Edit

! Playback screen for recorded titles. @ Information window for the selected title: Title name, recording date, lock status, recording mode # Recorded title No. $ Recorded title name % Recording Length (i.e., the playing time) ^ Edit menu Play: Plays the selected title. Rename: Changes the name of a selected title. Delete: Deletes the selected title from the list. Edit: Deletes a section of title. Protection: Locks or unlocks the selected title. & Button display This may depend on the disc type.
JAN/01/2006 01:00 AM CH1 JAN/01/2006 XP
Press the buttons to select Play to play the title list, then press the ENTER button. The selected title will be played back.

RAM VR

DVD-RW(V)/DVD+RW/R has limited editing function.

Free Space Function

This function is only available with DVD+RW discs. If existing titles are deleted, new free space will be created. When you operate free space function, on-air TV images will appear on the left side of the title list.
Press the STOP button to stop playing. To return the title list screen, press the TITLE LIST button. You can also play a recorded program by pressing the ANYKEY button.
Title Time Subtitle Audio Repeat Zoom
Press the TITLE LIST button. The Title List screen is displayed. Or use the MENU button. Press the MENU button. Press the buttons to select Title List, then press the ENTER or button twice.
DVD+RW JAN/01/2006 No. Title 12:00 12:30 01:00 01:30 Title List 1/4 Length Edit 00:00:11 00:00:09 00:01:36 00:00:11
3/4 00: 00: 07 Off ENG Off Off D 2CH

JAN/01/2006 12:00 AM CH1

01 JAN/01/JAN/01/JAN/01/JAN/01/2006
Press the buttons to select Title. Press the buttons to select to play the title list, then press the ENTER button.

JAN/01/2006 SP

70 - English

Page 71

Press the buttons to select a Title you want to delete, then press the ENTER or button.
DVD+RW JAN/01/2006 No. Title 01 JAN/01/JAN/01/JAN/01/JAN/01/2006 Title List 3/4 Length Edit Play 12:00 00:00:11 Rename 12:30 00:00:09 01:00 00:01:36 Delete 01:30 00:00:11 Protection Chapter Edit Divide Title
Basic Editing (Title List)
Renaming(Labeling) a Title
Follow these instructions to rename a title list name, i.e., to edit the title of a recorded program.
JAN/01/2006 01:00 AM CH1 JAN/01/2006 SP
Press the button to select Delete, then press the ENTER or button.
DVD+RW JAN/01/2006 Title List 3/4

Press the buttons to select Disc Format, then press the ENTER or button.
DVD-RW(VR) Title List Playlist Disc Manager Timer Rec. Setup Title List
DVD-RAM/+RW You will be prompted with the confirmation message 'Do you want to format disc?'.
DVD-RAM(VR) Title List Playlist Disc Name Disc Protection : : Not Protected
Disc Manager Copy MOVE ENTER RETURN EXIT
Format : Disc Manager Disc you want to format disc? Do Delete All Title Lists Timer Rec. Setup Copy MOVE ENTER RETURN Yes No
You will be prompted with the confirmation message 'All data will be deleted. Do you want to continue?'.

86 - English

11:25 AM

Page 87

DVD-RW(VR) Title List Playlist Disc Manager Timer Rec. Setup Copy MOVE ENTER RETURN EXIT Disc Name Disc Protection Disc Format Disc Finalize Delete All Title Lists : : Not Protected : DVD-VR
Press the buttons to select Yes, then press the ENTER button. The disc is finalized.
Once a disc is finalized, you cannot delete titles from the record list. Once a DVDR/DVD-RW (video mode)disc is finalized, it is playable in a standard DVD player. Depending on the disc type, the displayed screen may be different.
Press the button to select Disc Finalize, then press the ENTER or button.
Finalizing time may be different depending on the amount of data recorded on the disc. Data on the disc will be damaged if the recorder is powered off during finalize process.
Unfinalizing a disc (V/VR mode)
DVD-R(V) Title List Disc Manager Timer Rec. Setup Copy Disc Name Disc Protection Disc Finalize Delete All Title Lists :

Title List DVD-RW(VR:F)

: Not Protected
Title List Playlist Disc Manager
You will be prompted with the message 'Do you want to finalize disc?'.
DVD-RW(VR:F) Title List Playlist Disc Manager
: DVD-VR Disc Manager Disc Format Do you want to finalize disc? Disc Finalize Timer Rec. Delete YesTitle Lists No All Setup Copy MOVE ENTER RETURN
Disc Name Disc Format Disc Unfinalize

: : DVD-VR

Disc Manager Timer Rec.
If you select Yes, you will be prompted again with the message 'Disc will be finalized. Do you want to continue?'

105 Challenger Road Ridgefield Park, NJ 07660-0511 1-800-SAMSUNG (726-7864) and www.samsung.com

Page 98

Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Customer Care Center
1-800-SAMSUNG (7267864) 01-800-SAMSUNG (7267864) 1-800-SAMSUNG (7267864) 0800-333-3733 0800-124-421 800-726-7864(SAMSUNG) 0-800-507-7267 1-800-10-7267 800-6225 1-800-299-0013 1-800-234-7267 800-7267 1-800-682-3180 1-800-751-2676 1-800-7267-864 1-800-100-65 (0,15/Min) 01805 - 121213 ( 0,12/Min) 88 ( 0.10/Min) 0303 8-800-200-0400 8-800-502-800-810-5858, 010- 11 0800-112-8888 0120-327-527 1800-88-9999 1800-10-SAMSUNG (7267864) 1800-SAMSUNG (7267864) 1800-29-3232 02-689-3232 0800-329-7267864 (SAMSUNG) 800SAMSUNG (7267864)

Region North America

Country
CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA TRINIDAD & TOBAGO VENEZUELA BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN U.K RUSSIA UKRAINE AUSTRALIA CHINA HONG KONG INDIA

Web Site

www.samsung.com/ca www.samsung.com/mx www.samsung.com www.samsung.com/ar www.samsung.com/br www.samsung.com/cl www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/be www.samsung.com/cz www.samsung.com/dk www.samsung.com/fi www.samsung.com/fr www.samsung.de www.samsung.com/hu www.samsung.com/it www.samsung.lu www.samsung.com/nl www.samsung.com/no www.samsung.com/pl www.samsung.com/pt www.samsung.com/sk www.samsung.com/es www.samsung.com/se www.samsung.com/uk www.samsung.ru www.samsung.com/ur www.samsung.com/au www.samsung.com.cn www.samsung.com/hk www.samsung.com/in www.samsung.com/id www.samsung.com/jp www.samsung.com/my www.samsung.com/ph www.samsung.com/sg www.samsung.com/th www.samsung.com/tw www.samsung.com/vn www.samsung.com/za www.samsung.com/mea