Compared to standard interlaced video, progressive scan doubles the amount of video lines fed to your TV, resulting in a more stable, flicker-free, and clear image than interlaced video. The progressive scan video output jack is used in progressive output mode. This is only available with TVs that support progressive scan. I Progressive Scan Output (480p) Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. If you experience 480p progressive scan picture problems, it is recommended that you switch the connection to the standard definition output. If there are questions regarding TV set compatibility with this model, please contact our customer service center at 1-800-SAMSUNG.

20 - English

Page 21
Select one of the Audio connections on the following pages.

Connecting to your TV

This connection will use your TVs speakers.

English - 21

Page 22
Connecting to a stereo amplifier with analog input jacks
If your stereo amplifier only has AUDIO INPUT jacks(L and R), use the AUDIO OUT jacks.

ANALOG AUDIO

Front(L)speaker

Front(R)speaker

22 - English

7:35 PM

Page 23
Connecting to an AV amplifier with a digital input jack
If your AV amplifier has a Dolby Digital or DTS decoder and a digital input jack, use this connection. To enjoy Dolby Digital or DTS sound, you will need to set up the audio settings. (See page 35)
Optical Cable (not supplied)
Coaxial Cable (not supplied)

AV amplifier

Digital Audio
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.

English - 23

Page 24
This allows you to connect your DVD Recorder & VCR to other external devices and view or record their outputs.
Connecting a VCR, Set-Top Box(STB) or DVD player to the AV 1 IN or S-VIDEO IN jacks
Connecting a VCR or external device to AV 1 IN jacks of the DVD Recorder & VCR. You can record from connected equipment (VCR, STB or DVD).

EXIT MOVE ENTER

30 - English

Page 31

Daylight Saving
Press the buttons to select Yes or No, then press the ENTER or button. Select Automatic to set the daylight saving automatically.
No Disc Timer Rec. Setup Clock Data CH Time Zone Daylight Saving : Automatic : Automatic : Automatic Automatic Yes No

Clock Set

Press the buttons to select Manual Clock Set, then press the ENTER or button.

Manual Clock Set

If Auto Setup fails to set the DVD Recorder & VCRs internal clock by locating a local TV station, follow these steps to set the date and time manually. For accurate Timer Recording, your DVD Recorder & VCR's internal clock must be set correctly. With the unit in Stop mode/No Disc mode, press the MENU button.

No Disc

Timer Rec. Setup Month Day 01 SUN Press numeric keys or keys. 01 Year 2006 Hour Minute AM/PM AM
Press the buttons to select the Current Date and Time, then press the ENTER button. When the current time is stored in memory and then the set is powered off, the current time will appear in the front panel display.
: Sets the value You can set the value using the number (0~9) buttons. : Moves to items

English - 31

Page 32

Channel Set

Press the buttons to select Antenna/Cable TV, then press the ENTER or button.
No Disc Timer Rec. Setup Antenna/Cable TV AntennaTV : Cable Auto Channel Memory Cable TV Channel Add/Delete RF Output Channel : CH3
This feature allows you to manually set the DVD Recorder & VCRs tuner band to Antenna or Cable, whichever you connected to the Antenna In jack during initial setup. Use this setting only if Auto Setup detected the incorrect tuner band, i.e. channels are coming in on the wrong channel numbers.
Select the Antenna or Cable TV(Signal Source) that matches the antenna connection you selected on pages 15~17. Antenna - Select this if the DVD Recorder & VCR is connected to an indoor or outdoor VHF/UHF antenna. (See pages 15, 17) Cable TV - Select this if the DVD Recorder & VCR is connected to a cable TV. (See page 16)

Auto Channel Memory

Auto Channel Memory will automatically seek and store all active channels in your area.
With the unit in Stop mode/No Disc mode, press the MENU button. Press the buttons to select Setup, then press the ENTER or button. Press the buttons to select Channel Set, then press the ENTER or button.

Press the buttons to select the desired item, then press the ENTER or button.
previous menu. Press the MENU button to exit the menu.

English - 35

Page 36
Setting Up the Display(Video) Options
This function allows you to setup the TV screen settings.

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio) 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. 4:3 Pan & Scan : Select this for a conventional size TV when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.) 16:9 Wide : You can view the full 16:9 picture on your wide-screen TV.

Input Level

Adjusts the level of the input signal.
Darker : If you feel the screen is too light
Press the buttons to select Video, then press the ENTER or button. Video option menu will be displayed.
No Disc Timer Rec. Setup TV Aspect Input Level Black Level : 16:9 Wide : Darker : 7.5 IRE
and you want to make the screen darker. Lighter : If you feel the screen is too dark and you want to make the screen lighter.

Black Level

Adjusts the black level of the screen. 7.5 IRE : This will enhance the black level for increased brightness/contrast when viewing DVDs. Select this when you want to make the screen lighter. 0 IRE : This is the standard NTSC reference black level for consistent brightness/contrast across all sources. Select this when you want to make the screen darker.

3D Noise Reduction : Off

Press the buttons to select the desired video option, then press the ENTER or button.

3D Noise Reduction

Off : Normal On : Select to remove noise from the screen.
Press the RETURN or button to return to the previous menu. Press the MENU button to exit the menu.
This function depends on disc type. It may not work for some disc types. IRE: Short for the Institute of Radio Engineers. An IRE unit is a relative unit of measure equaling 1/140th of the peak-to peak (p-p) video amplitude.

36 - English

Page 37
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating - which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
The Re-enter Password screen appears to confirm the password. Enter your password again, and then press the ENTER or button.
No Disc Timer Rec. Setup Password :Off Off On

Parental Control

With the unit in Stop mode/No Disc mode, press the MENU button on the remote control.
Press the buttons to select On, then press the ENTER or button. The Parental Control screen appears. Press the RETURN or button to return to the previous menu. Press the MENU button to exit the menu. Refer to Troubleshooting if you forget your password. (See page 91)

About the Rating Level

Press the buttons to select Rating Level, then press the ENTER or button.
No Disc Timer Rec. Setup Password Rating Level Change Password : On : Level 1 Kids
Press the buttons to select Parental Control, then press the ENTER or button.
No Disc Timer Rec. Setup Create the password Parental Control
NUMBER ENTER RETURN EXIT No Disc Timer Rec. Setup Password
Create a 4-digit password using the 0 to 9 buttons on the remote control.
No Disc Timer Rec. Setup Confirm the password Parental Control MOVE
:On 8 Adults Level :Level 7 Kids Level 1 Level 6 Change Password Level 5 Level 4 Level 3 Level 2 Level 1 Kids Rating Level ENTER RETURN

NUMBER ENTER RETURN EXIT

Press the buttons to select the rating level you want, then press the ENTER or button. For example, if you select up to Level 6, discs that contain Level 7, 8 will not play. A larger number indicates that the program is intended for adult use only.

English - 37

Page 38
About the Change Password

VCR Setting

Press the buttons to select Change Password, then press the ENTER or button.
This function allows you to setup the VCR.

No Disc Timer Rec. Setup

Change Password
No Disc Timer Rec. Setup Setup

Enter the password

System Clock Set Channel Set Language Audio Video Parental Control
Enter the 4-digit password using the number buttons on the remote control. The Confirm the password message will be displayed.
No Disc Timer Rec. Setup Confirm the password Change Password

If you press the l button If you press the l button, it moves to the next
chapter, track or marker(DVD-RAM,DVD-RW (VR mode) )
Skipping ahead 30 seconds
During the playback, press F.ADV/SKIP button to skip ahead exactly 30 seconds.

44 - English

Page 45
Slow Motion Play/ Step Motion Play
Slow Motion Play (DVD-VIDEO / DVD-RAM / DVDRW / DVDR)

About ANYKEY

The ANYKEY functions allows you to easily search for a desired scene by accessing title, chapter or time. You can also change the subtitle and audio settings and set some features including Repeat, Angle and Zoom.
During pause mode, press the SEARCH or button on the remote control for more than 1 second. Each time you press the button : l Slow 1 l Slow 2 l Slow 3 Each time you press the button : l Slow 1 l Slow 2 l Slow 3 To return to normal speed playback, press the ll button.
Moving to a scene directly using the ANYKEY
If you want to move to a title or a chapter to find a desired scene.
Press the ANYKEY button during playback.
Step Motion Play (DVD-VIDEO / DVD-RAM / DVDRW / DVDR)
Press the buttons to select Title, Chapter.

Title Chapter Time

1/2 1/28 00:00:01 ENG ENG Off 1/1 Off D 5.1CH
During pause mode, press the F.ADV button on the remote control. Each time the button is pressed, a new frame will appear. To return to normal speed playback, press the ll button.
Subtitle Audio Repeat Angle Zoom

CHANGE

No sound is heard during Step or Slow mode.
Press the buttons or number (0~9) buttons to select the desired scene. Then, press the ENTER button.

English - 45

Page 46
If you want to move to a desired time to help you find a scene.
Select repeat mode using button. Press the ENTER button. To make the screen disappear, press the ANYKEY or RETURN button. DVD-RAM/DVD-RW(VR mode), unfinalized DVDR and unfinalized DVD-RW (Video mode) do not repeat a chapter.
Press the buttons to select Time.
Title Chapter Time Subtitle Audio Repeat Angle Zoom
1/2 1/28 00:00:01 ENG ENG Off 1/1 Off 0~9 NUMBER D 5.1CH
Playing a Certain section Repeatedly (A-B Repeat Playback)
Enter the time in the sequence of hours, minutes, and seconds using the number buttons, then press the ENTER button. This may not work for some discs. When an Audio CD(CD-DA) or an MP3 disc is inserted, depending on the disc type, the information display may not be appear. The Time Search function does not operate in some discs. To make the screen disappear, press the ANYKEY button again.
Press the buttons to select Repeat.

Repeat Playback

Playing Repeatedly(Repeat Playback)

Press II (PLAY/PAUSE) button on the remote control or on the front panel to play a S-VHS tape.

56 - English

Page 57

End Search

Use this feature when you want to search for a blank position to record a program on a cassette.
Press the buttons to select Forward Intro Scan or Reverse Intro Scan, then press the ENTER button. When an Index mark is found, the DVD Recorder & VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark.
While a cassette is stopped, press the ANYKEY button.

Scan and Play 00:01:49

Press the buttons to select End Search, then press the ENTER button. The VCR will fast forward, searching for a blank position, and then automatically stop at that position. If the VCR reaches the end of the tape during end search, the tape will be ejected.

End Search 00:00:13

Forward / Reverse Intro Scan
Use scan and play when you dont know exactly where a program is located on a cassette tape.

English - 57

3:15 PM

Page 58

This section explains various DVD recording methods.

Before Recording

This unit can record on various types of discs. Before recording, read the following instructions and select the disc type according to your preference.

Recordable discs

This recorder can record on the following discs. DVD-RAM DVD-RW DVD-R DVD+RW DVD+R
DVDRWs and DVD-RAMs are rewritable. DVDRs are non-rewritable. Compatibility between Samsung and other manufacturer's Recorders.
Disc Types DVD-RAM Recording format VR Mode Recording Device Finalizing Additional Recording in Samsung Recorder Samsung X Recordable Recordable Other Company X Not recordable finalized Samsung Recordable not finalized finalized Not recordable Other Company not finalized Recordable finalized Not recordable Samsung not finalized Recordable Not recordable finalized Other Company not finalized Not recordable finalized Not recordable Samsung not finalized Recordable finalized Not recordable Other Company not finalized Not recordable Samsung Recordable X Not recordable in some cases Other Company X finalized Not recordable Samsung not finalized Recordable finalized Not recordable Other Company not finalized Not recordable in some cases

VR Mode

DVD Recording Before Recording...58 Recordable discs...58 Recording Formats...59 Recording Mode...59 Unrecordable video...59 Recording the Current Channel you are watching.60 Recording from External Devices..61 Recording through a DV Input jack..61 Making a One Touch Recording(OTR)..62 Making a Timer Recording..62 Editing the Scheduled Record List..64 Deleting a the Scheduled Record List..64

DVD-RW V Mode

V Mode
VCR Recording Basic VCR Recording..65 Check Remaining Time..66 Special Recording Features...66 Copy to DVD or VCR...67

58 - English

Finalize - This closes the DVD-RW/R so no additional recording can be done. Unfinalize - This allows additional recording on a DVD-RW disc originally recorded on the DVD-VR330. - A DVD-RW disc that has been recorded by DAO(Disc At Once) in a PC cannot be unfinalized. - A DVD-RW disc that has been recorded in Video Mode of a different makers recorder cannot be unfinalized. - A DVDR disc cannot be unfinalized.

Page 59

Recording Formats
When you insert an unused disc, the following message appears. Since available functions differ depending on the disc type, select a disc that best fits your preferences. DVD-RAM: Use after formatting the disc.

DVD+RW/+R

You can also make your own chapters on DVD+RWs and edit them using the Chapter Edit menu. (see pages 75 to 77)

Recording Mode

Unformatted Disc Do you want to format this disc?
DVDRW/+R: When an unused DVDRW/+R disc is first inserted, the message Uninitialized Disc Do you want to initialize this disc? will be displayed. If you select Yes, initializing will be start.
With the unit in Stop mode, select one of four recording modes by pressing the REC SPEED button repeatedly for the desired recording time and picture quality. In general, picture quality improves as the recording time decreases. In AUTO mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc and length of the timer recording. You can select only one mode from XP, SP, LP and EP for timer recording. Mode XP (high quality mode) Characteristic Select when the video quality is important. Select to record in standard quality. Select when a long recording time is required. Select when a long recording time is required. for timer recording only see page 63. Recording Times Data Rates Approx. 1 hour about 8 Mbps Approx. 2 hours about 4 Mbps Approx. 4 hours about 2 Mbps Approx. 6 hours/ about 1.2 Mbps Approx. 8 hours/ about 0.8 Mbps Approx 60 to 480 Min approx 0.8 to 8 Mbps

Press the REC button. is displayed on the screen and recording begins. Press the STOP button to stop or finish a recording in progress. The message Updating the information of disc. Please wait for a moment is displayed.

Pausing / Resuming

Press the REC PAUSE button to pause a recording in progress. Press the REC PAUSE button again during pause to resume recording. You can switch channels by pressing the CH/TRK ( / ) buttons while recording pauses.
Recording the Current Channel you are watching
1. Check to make sure the antenna cable is connected. 2. Check the remaining time on the disc. DVD-RAM/DVDRW/+R discs should be formatted or initialized in advance before beginning recording. (See page 59.)
Recording will stop automatically if there is no free space left for recording. Up to 99 titles can be recorded onto a DVDRAM/-RW/-R disc, and up to 48 titles onto a DVD+RW/+R disc. If the power is interrupted due to power failure or other reasons, the title being recorded will not be saved onto the disc. Recording will stop automatically if a copy protected image is selected. Do not use DVD-R authoring discs with this unit.
Press the OPEN/CLOSE button and place a recordable disc on the disc tray. Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display.

60 - English

Page 61
Recording from External Devices
Follow these directions to record onto a disc or a tape from External Devices such as a Camcorder.
Recording through the DV Input jack
You may control your Camcorder using the IEEE1394 (DV) interface. Follow these directions to record onto a disc or tape from a camcorder that has a DV output jack.
Connect the AV out jack of your External Device to the AV IN jack on the front or rear of your DVD Recorder & VCR using the Audio/Video Cable. Power on your DVD Recorder & VCR and switch to AV In mode by pressing the INPUT SEL. button on the remote control. The front panel display changes in the following sequence depending on the Video input setting in the menu. AV1: Channel Number AV 1 AV 2 DV S-Video: Channel Number SUPER AV 2 DV

Turn the power off to finish the timer recording. will blink if disc or tape is not inserted.
The timer recording time may differ from the set time depending on disc status and overall timer recording status (for example, recording times overlapping, or when the previous recording ends within 3 minutes before the start time of the next recording.)

English - 63

Page 64
Editing the Scheduled Record List
Press the button to select Edit, then press the ENTER button. The Timer Recording screen is displayed. Edit the items you want to modify. See the Timer Recording section for more information on Timer Recording Input items. (See page 63)
Scheduled Record List Current Time 1:07 AM Date
Follow these directions to edit the timer record list.

Press the MENU button.

Press the button to select Timer Rec., then press the ENTER or button.
DVD-RAM(VR) Title List Playlist Disc Manager Timer Rec. Setup Copy MOVE ENTER RETURN EXIT Timer Record Scheduled Record List
Press the ENTER button to confirm the edited setting.
Press the MENU button after finishing the operation. The menu screen will disappear.
Press the button to select Scheduled Record List, then press the ENTER or button.
Deleting the Scheduled Record List
Scheduled Record List Current Time 12:27 AM Date Start End Mode Edit

DVD DVD

CH06 CH06
01/01 03:05AM 05:05AM SP 01/02 01:06AM 03:06AM SP / : :
Follow these directions to delete a title from the timer record list.
Press the button to select the number of the scheduled record list you want to edit, then press the ENTER or button. The Edit and Delete items are displayed.

DVD-RAM(VR)

SP Edit SP Delete
Title List Playlist Disc Manager Timer Rec. Setup Copy MOVE
Timer Record Scheduled Record List
01/01 03:05AM 05:05AM 01/02 01:06AM 03:06AM

/ : :

64 - English

Page 65

Basic VCR Recording
Before starting 1. Check TV channel and Antenna connections. 2. Check the remaining time on the tape. You can record a TV show in progress by inserting a blank tape and pressing the (REC) button. You can even add time in preset increments up to 4 hours by pressing the (REC) button repeatedly. Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small piece of tape. Warning: Do not cover this opening unless you are sure you want to record over the tape.

DVD-RW(VR) Title 12:00 12:30 01:00 01:JAN/01/JAN/01/JAN/01/JAN/01/2006 00:00:11 00:00:09 00:01:36 00:00:11 1/4 JAN/0

1/4 Length Edit

Length Edit Title No.
JAN/01/2006 12:00 00:00:JAN/01/2006 12:30 00:00:JAN/01/2006 01:00 00:01:JAN/01/2006 01:30 00:00:11 04

Rename Delete Edit

JAN/01/2006 12:00 AM CH1 JAN/01/2006
Protection ENTER EXIT EXIT

MOVE RETURN

Press the buttons to select a Title, then press the ENTER or button. The Edit menu is displayed:Play, Rename, Delete, Edit, Protection(See pages 71~74)
DVD-RAM(VR) JAN/01/2006 No. Title 01 JAN/01/JAN/01/JAN/01/JAN/01/2006 12:00 00:00:11 12:30 00:00:09 Play 01:00 00:01:36 Rename 01:30 00:00:11 Delete Edit Protection ENTER RETURN EXIT Title List 3/4 Length Edit
! Playback screen for recorded titles. @ Information window for the selected title: Title name, recording date, lock status, recording mode # Recorded title No. $ Recorded title name % Recording Length (i.e., the playing time) ^ Edit menu Play: Plays the selected title. Rename: Changes the name of a selected title. Delete: Deletes the selected title from the list. Edit: Deletes a section of title. Protection: Locks or unlocks the selected title. & Button display This may depend on the disc type.
JAN/01/2006 01:00 AM CH1 JAN/01/2006 XP
Press the buttons to select Play to play the title list, then press the ENTER button. The selected title will be played back.

RAM VR

DVD-RW(V)/DVD+RW/R has limited editing function.

Free Space Function

This function is only available with DVD+RW discs. If existing titles are deleted, new free space will be created. When you operate free space function, on-air TV images will appear on the left side of the title list.
Press the STOP button to stop playing. To return the title list screen, press the TITLE LIST button. You can also play a recorded program by pressing the ANYKEY button.
Title Time Subtitle Audio Repeat Zoom
Press the TITLE LIST button. The Title List screen is displayed. Or use the MENU button. Press the MENU button. Press the buttons to select Title List, then press the ENTER or button twice.
DVD+RW JAN/01/2006 No. Title 12:00 12:30 01:00 01:30 Title List 1/4 Length Edit 00:00:11 00:00:09 00:01:36 00:00:11
3/4 00: 00: 07 Off ENG Off Off D 2CH

JAN/01/2006 12:00 AM CH1

01 JAN/01/JAN/01/JAN/01/JAN/01/2006

Press the buttons to select Title. Press the buttons to select to play the title list, then press the ENTER button.

JAN/01/2006 SP

70 - English

Page 71

Press the buttons to select a Title you want to delete, then press the ENTER or button.
DVD+RW JAN/01/2006 No. Title 01 JAN/01/JAN/01/JAN/01/JAN/01/2006 Title List 3/4 Length Edit Play 12:00 00:00:11 Rename 12:30 00:00:09 01:00 00:01:36 Delete 01:30 00:00:11 Protection Chapter Edit Divide Title
Basic Editing (Title List)
Renaming(Labeling) a Title
Follow these instructions to rename a title list name, i.e., to edit the title of a recorded program.
JAN/01/2006 01:00 AM CH1 JAN/01/2006 SP
Press the button to select Delete, then press the ENTER or button.
DVD+RW JAN/01/2006 Title List 3/4

Do you want to delete?

JAN/01/2006 01:00 AM CH1 JAN/01/2006 SP Yes No
You will be prompted with the confirmation message 'Do you want to delete?'.
Press the buttons to select Yes, then press the ENTER button. The selected title has been deleted and Free Space is displayed.
DVD+RW Free Space No. Title 12:00 12:30 01:00 01:JAN/01/JAN/01/JAN/01/Free Space 00:00:11 00:00:09 00:01:36 01:58:04 Title List 4/4 Length Edit

Free Space CH1 SP

Press the buttons to select a title you want to rename from the Title List, then press the ENTER or button.
DVD-RAM(VR) Title List 3/4 No. Title Length Edit 12:00 00:00:11 12:30 00:00:09 Play 01:00 00:01:36 Rename 01:30 00:00:11 Delete Edit Protection ENTER RETURN EXIT
JAN/01/JAN/01/JAN/01/JAN/01/JAN/01/2006
New free Space will be created equal to the length of the deleted title.
JAN/01/2006 01:00 AM CH1 JAN/01/2006

- Recording a title

Press the button to select Free Space, then press the ENTER or button. On-air TV images will appear on the left side of the title list.
DVD+RW Free Space No. Title 01 JAN/01/JAN/01/JAN/01/Free Space 12:00 00:00:11 12:30 00:00:09 01:00 00:01:36 Recording 01:30 01:58:04 Title List 4/4 Length Edit
Press the buttons to select Rename, then press the ENTER or button. The Rename screen is displayed.
DVD-RAM(VR) JAN/01/2006 01:00 AM CH1 Rename

EXIT Back Space

Save Space ENTER Delete RETURN Clear EXIT

Press the ENTER button.

English - 71

Page 72

Select the desired characters using the buttons, press the ENTER button.
DVD-RAM(VR) Sport(A1) Rename
Locking(Protecting) a Title
Follow these instructions to lock a title to protect it from accidental deletion.
Save Back Space MOVE Space ENTER Delete RETURN Clear EXIT
DVD-RAM(VR) Title List 1/4 No. Title 12:00 12:30 01:00 01:30 Length Edit 00:00:11 00:00:09 00:01:36 00:00:11
Back Space: Moves the cursor one position backwards. Space: Enters a blank and moves the cursor one forward (to the right). Delete: Deletes the character at the cursor position. Clear: Deletes all the character inputs. Save: Registers the character inputs. Press the buttons to select Save, and then press the ENTER button. The changed title name is displayed in the title field of the selected title.
DVD-RAM(VR) Sport(A1) No. Title Title List 3/4 Length Edit 01 JAN/01/2006 12:00 00:00:JAN/01/2006 12:30 00:00:Sport(A1) 00:01:JAN/01/2006 01:30 00:00:11
Press the buttons to select a title you want to protect in the Title List, then press the ENTER or button.
JAN/01/2006 12:00 AM CH1 JAN/01/2006 EP

Sport(A1) JAN/01/2006 XP

Press the buttons to select Protection, then press the ENTER or button.
DVD-RAM(VR) JAN/01/2006 Title List 5/31

Title Protection :

JAN/01/2006 12:00 AM CH1 JAN/01/2006 On Off
Press the buttons to select On, then press the ENTER button. The lock icon on the information window for the selected title changes to the locked status. ( )
DVD-RAM(VR) JAN/01/2006 No. Title 12:00 12:30 01:00 01:JAN/01/JAN/01/JAN/01/JAN/01/2006 00:00:11 00:00:09 00:01:36 00:00:11 Title List 3/4 Length Edit

72 - English

Page 73

Deleting a Title

Follow these instructions to delete a title from the Title List.
DVD-RW(Video mode),DVD+RW, DVDR : Since Playlist is not present, the message Do you want to delete? is displayed.
DVD-RW(V) JAN/01/2006 Title List 1/4
JAN/01/2006 12:00 AM CH1 JAN/01/2006 EP Yes No
The message may depend on the type of disc.
Press the buttons to select Yes, then press the ENTER button.
You cannot delete a protected title. If you want to delete a protected title, select Off in the Title Protection menu. Once a title is deleted from the Title List it cannot be recovered.
Press the buttons to select a title you want to delete in the Title List, then press the ENTER or button.
DVD-RAM(VR) JAN/01/2006 No. Title 01 JAN/01/JAN/01/JAN/01/JAN/01/2006 12:00 00:00:11 12:30 00:00:09 Play 01:00 00:01:36 Rename 01:30 00:00:11 Delete Edit Protection ENTER RETURN EXIT Title List 1/4 Length Edit

If you select Yes, you will be prompted again with the message 'Disc will be finalized. Do you want to continue?'
DVD-Video(RW) Title Menu Disc Menu Disc Manager Timer Rec. Disc Format Disc Unfinalize

: DVD-V

: DVD-VR Disc will Disc Manager Disc Format be finalized. DiscDo you want to continue? Finalize Timer Rec. Delete YesTitle Lists No All Setup Copy MOVE ENTER RETURN
Setup Copy EXIT MOVE ENTER RETURN EXIT

English - 87

Page 88
Press the button to select Disc Unfinalize, then press the ENTER or button. You will be prompted with the message 'Do you want to unfinalize disc?'.
DVD-RW(VR:F) Title List Playlist Disc Name Disc Format :
DVD-RAM(VR) Title List Playlist Disc Manager Title List

: DVD-VR

Disc Manager Disc Unfinalize Do you want to unfinalize disc? Timer Rec. Setup Copy MOVE ENTER RETURN Yes No

Timer Rec. Setup Copy

If you select Yes, you will be prompted again with the message 'Disc will be unfinalized. Do you want to continue?'
DVD-RAM(VR) Title List Playlist Disc Manager Timer Rec. Disc Name Disc Protection Disc Format : : Not Protected :
Unfinalize Disc Manager DiscDisc will be unfinalized. Do you want to continue? Timer Rec. Setup Copy MOVE ENTER RETURN Yes No
Press the buttons to select Yes, then press the ENTER button. The disc is unfinalized.
Press the button to select Delete All Title Lists, then press the ENTER or button.
DVD-RAM(VR) Title List Playlist Disc Name Disc Protection : : Not Protected :
A DVD-RW can be finalized or unfinalized in Video mode.
Finalize DVD-Video(RW) Unfinalize DVD-RW(V) Additional recording, protection and deletion are possible.
Operation Same as DVD-Video
A DVD-RW can be finalized or unfinalized in VR mode.
Finalize Mark DVD-RW(VR:F) Additional recording, deletion, editing, and protection are impossible. Unfinalize
You will be prompted with the confirmation message 'Do you want to delete all title lists?'.
DVD-RW(VR) Additional recording, deletion, editing, and protection are possible.