quick setup guide

EZ REC MODE General Information Getting Connected Setup Basic Operation Disc compatibility
Disc Types that can be played DVD-RAM/RW/R, DVD-VIDEO, CD-RW/-R, Audio CD (CD-DA), MP3, JPEG discs DVDR/DVD-RW discs which have been recorded on another DVD recorder, can only be played on the DVD-VR375 when nalized.
3 Getting Connected (Basic Connections)
Tunerless DVD Recorder & VCR
The DVD-VR375 does not have a TV tuner. Recording TV broadcasts is possible via Connection to Set Top/Cable Box/Satellite and Multi Channel Video Services.

Connecting Audio/Video

Press your TVs INPUT button until the signal from the DVD Recorder & VCR appears on your TV screen.
DVD Recorder & VCR DVD-VR375
Cautions when you use discs Using poor quality DVD-RAM/RW/R discs may cause unexpected problems such as recording failure or loss of recorded / edited data. A copy protected disc can not be recorded.

Before Recording

This DVD Recorder & VCR can Record or Playback high quality video/ audio on DVD-RAM/RW/R discs or VHS tapes. It takes 12 seconds to initialize and 20 seconds to load after you press the POWER button for the rst time. With this DVD Recorder & VCR, you can record TV, Video and from external devices connected to the DV (IEEE 1394) jack onto a DVDRAM/RW/R disc.
There are two different recording methods, Direct Recording and Timer Recording. Check that the disc has enough available space for the recording. For detailed information about recording, please refer to the Instruction manual.
Using HDMI or Audio-Video cable
Use one of these basic connections to get up and running. HDMI offers the best quality picture.

1 EZ REC MODE

This function allows you nalize a disc automatically.
1. Press the buttons to select EZ Record, then press the ENTER button. 2. Press the buttons to select On, then press the ENTER button. Press the EXIT button to exit the menu. You can operate EZ Record by using EZ REC MODE button on the remote control. 3. Insert a disc. If the disc is a new DVD-RW, it is initialized to V mode automatically. 4. Press the REC() button. 5. EZ Record function will automatically nalize the disc under the following conditions. When you press the OPEN/CLOSE button on your DVD Recorder & VCR after recording on at least 30% of the disc. The tray will open after the disc has been nalized. The above feature is available only when a DVD-RW(V)/-R(V)/+R disc is inserted.

Connecting

Recording

[Remote Control]

Recordable disc Specications

Disc Types

Press [On] to confirm EZ REC mode. Otherwise press [Off]

On Off

Recording Format V mode
DVD-R VR Mode V mode VR mode VR mode -
Finalize Finalized Not Finalized Finalized Not Finalized Finalized Not Finalized

DVD-RW

Playback on other DVD players OK Not available (Finalize to play) Check if other manufacturers product is supported. (Most players do not support VR-mode) OK Not available (Finalize to play) Check if other manufacturers product is supported. (Most players do not support VR-mode) OK OK Not available (Finalize to play)
Using Audio-Video/Component cable (Other Connection possibilities)

2 General Information

Available Discs
Select a disc based on your intended use. Purchase DVD-RAM/RW/-R discs if you want to edit after recording. (When using a DVD-RW/-R disc, you can edit after recording in VR mode only) Purchase DVDR discs if you want to record once without editing. Recordable discs
DVD-R DVD-RW DVD-RAM DVD+R DVD+RW

DVD-RAM DVD+RW DVD+R

Some DVD Players cannot play writable Discs. Please check the DVD player's specications. Once a recorded DVDR is nalized, it can be played in standard DVD players. DVD-RW/-R discs can be formatted in Video or VR mode. CD-RW/-R discs are for playback only. DVD-RAM discs are formatted to VR-mode only. In VR-mode, it is possible to use functions that have not been nalized such as all disc-deletion, revision, partial edition, and title edition. Up to 99 titles can be recorded onto a disc.
Finalize - This closes the DVD-RW/R so no additional recording can be done. - The DVD-RAM/+RW disc cannot be finalized. Unfinalize - This allows additional recording on a DVD-RW disc originally recorded on the DVD-VR375. - A DVD-RW disc that has been recorded by DAO (Disc at Once) on a PC cannot be unfinalized. - A DVD-RW disc that has been recorded in Video Mode of a different manufacturer's recorder cannot be unfinalized. - A DVDR disc cannot be unfinalized.

Non recordable discs

DVD-R for authoring
If your TV has an HDMI input, connect an HDMI cable for the best quality image and sound.

C Samsung Electronics

1 - English

2 - English

3 - English

4 - English

01614A-VR375-XAA-ENG-QG.indd 1-4

2008-01-31 11:11:54

4 Setup

Clock Set

1. With the unit in Stop /No Disc mode (no disc inserted in the unit), press the MENU button. 2. Press the buttons to select Setup, then press the ENTER button. 3. Press the buttons to select Clock Set, then press the ENTER button. 4. Press the buttons to select the Current Date and Current Time, then press the ENTER button.
Title List Timer Edit Dubbing Disc Setting Setup m Move sEnter rReturn eExit Hour Min AM/PM AM 12 : 00 Set the time and date manually. Month Day Year 2008 Tue

Formatting a Disc

Use these instructions to format a disc. Disable disc protection before formatting. 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Disc Setting, then press the ENTER button.

12:00 AM Disc Format

Title List Timer Edit Dubbing Disc Setting Setup m Move sEnter rReturn eExit Disc Name Disc Protect : : Not Protected

Recording Mode (VCR)

12:00 AM
Recording from external equipment connected to the front jacks
T-120 Approx. 2 hrs Approx. 6 hrs Recording Times T-160 Approx. 2hrs 40 mins Approx. 8 hrs T-180 Approx. 3 hrs Approx. 9 hrs You can record from connected equipment, such as a camcorder by using the AV2 IN or DV IN jacks on front of the DVD Recorder & VCR.
Recording Mode (VCR) SP (Standard Play) EP (Extended Play)
Disc Format : VR Mode DiscSelect the recording format. Finalize : Unfinalized Disc Information Erese All Titles VR Mode Video Mode
3. Press the buttons to select Disc Format, then press the ENTER button. DVD+RW You will be prompted with the conrmation message 'All of the data will be erased (even protected titles). Do you want to format this disc?'. DVD-RAM/-RW You will be prompted with the conrmation message Select the recording format. (When using a DVD-RAM disc, you can select VR mode only) You will be prompted with the conrmation message 'All of the data will be erased (even protected titles). Do you want to format this disc?'. You will be prompted with the conrmation message 'Do you want to format disc?'. 4. Press the buttons to select OK, then press the ENTER button. The disc is formatted.
Recording from External Equipment you are Watching
1. When using the set top/cable box or satellite receiver control, select the channel. When not using the set top/cable box or satellite receiver control, select the input AV1 or AV2. Select the channel on connected set top/cable box or satellite receiver before timer recording starts. 2. Press the REC SPEED button repeatedly to select the recording Speed (quality). HQ HSP SP LSP ESP LP EP SLP

Disc Format

Title List Timer Edit Dubbing Disc Setting Setup m Move sEnter rReturn Disc Name Disc Protect : : Not Protected

Audio Setup

(Refer to Audio Setting on page 32 of the Users manual for more information) Allows you to set up audio options to work with your audio system. 1. With the unit in Stop mode/No Disc mode, press the MENU button. 2. Press the buttons to select Setup, then press the ENTER button. 3. Press the buttons to select Audio, then press the ENTER button. 4. Press the buttons to select the desired audio option, then press the ENTER button. 5. Press the buttons to select the desired item, then press the ENTER button.
Title List Timer Edit Dubbing Disc Setting Setup > Move sEnter rReturn eExit Clock Set Video Audio Features Options Easy Setup
3. When your DVD Recorder & VCR is in the Stop mode, set the operation mode of your external devices to play mode. 4. Press the REC button on your DVD Recorder & VCR when the image from which you want to start recording is displayed.

Finalizing a Disc

After you record titles onto a DVD-RW/DVDR disc with your DVD Recorder & VCR, it needs to be nalized before it can be played back on external devices. 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Disc Setting, then press the ENTER button. 3. Press the buttons to select Disc Finalize, then press the ENTER button. You will be prompted with the message 'Do you want to nalize this disc?'. 4. Press the buttons to select Finalize, then press the ENTER button. You will be prompted again with the message Disc will be nalized. Do you want to continue?. 5. Press the buttons to select OK, then press the ENTER button. The disc is nalized.
Once a disc is finalized, you cannot delete titles from the record list. Once a DVDR/DVD-RW (video mode)disc is finalized, it is playable in a standard DVD player. Depending on the disc type, the displayed screen may be different. Finalizing time may be different depending on the amount of data recorded on the disc. Data on the disc will be damaged if the recorder is powered off during finalize process. You can Finalize the disc automatically using the EZ REC MODE. (See page 36)

Disc Finalize

Title List Timer Disc Name Disc Protect : : Not Protected
- To stop recording Press the STOP button to stop a recording in progress. 1. Connect the DV output jack of your camcorder to the DV input jack on the front of your DVD Recorder & VCR using a DV cable.
Making a Timer Recording on a Disc
1. Press the OPEN/CLOSE button, and place a recordable disc on the disc tray (or load a tape into the VCR). 2. Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display.
Title List Timer - Standard Timer List
2. Power on your DVD Recorder & VCR and switch to DV mode by pressing the INPUT SEL. button on the remote control. 3. Press the REC SPEED button repeatedly to select the recording Speed (quality). HQ HSP SP LSP ESP LP EP SLP 4. If the input is set to DV, a playback/record menu that enables camcorder control appears on the top of the screen. 5. Select the Playback related icons on the upper part of the screen to playback the camcorder and nd the starting position to dubbing.

sEnter rReturn eExit

Video Setup
This function allows you to setup the TV screen settings. 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Setup, then press the ENTER button. 3. Press the buttons to select Video, then press the ENTER button. 4. Press the buttons to select the desired video option, then press the ENTER button. 5. Press the buttons to select the desired item, then press the ENTER button.
Edit Dubbing Disc Setting Setup > Move
Disc Format : VR Mode Do Finalize Disc you want to finalize this disc? : Unfinalized Disc Information Erese All Titles Finalize Unfinalize

Timer Edit Dubbing

sEnter

rReturn

3. With the unit in Stop mode, press the MENU button. 4. Press the buttons to select Timer, then press the ENTER button. 5. Press the buttons to select Timer-Standard, then press the ENTER button. You can go to the Timer recording screen directly by pressing the TIMER REC button. The Timer Recording screen is displayed. 6. Fill in the items using the buttons. : Moves to the previous/next item, or 0~9 : To set or change items in the Scheduled Record List Menu.

Disc Setting Setup > Move
6. To start recording, Press the buttons to select REC () icon in the top side of the screen, then press the ENTER button. You can press the REC button on the remote control to start recording. 7. Press the STOP button on your DVD Recorder & VCR when the recording is nished.
Recordings are made onto disc only through the DV In jack. You cannot record onto videotape through the DV Input jack.

Timer-Standard

No. Media Date Start End Ch
Mode -Ch AV1 -Mode -SP ---eExit Edit
DVD 01/01 12:00 12:00 AV 1 No.01 ----/-- --:---:----Media Date Start End ----/-- --:---:----DVD Today 12 : 00 PM 12 : 11 PM ----/-- --:---:----------/---/---:---:---:---:--------

5 Basic Operation

Recording Formats
Since available functions differ depending on the disc type, select a disc that best fits your preference. When you insert an unused disc, the following message appears. DVD-RAM/RW/+R : Format will be started automatically. DVD-R : Initializing the disc is unnecessary. DVD-RAM/-RW(VR)/-R(VR) This mode involves multiple editing functions (such as deletion of the whole title, partial deletion of a title, etc.). Various editing options using a created Playlist. DVD-RW(V)/-R(V) Chapters will be created automatically when you nalize recording on DVD-R/DVD-RW discs in Video mode. Simple editing (erasing titles/changing title name).

Recording Mode (DVD)

With the unit in Stop mode, select one of eight recording modes by pressing the REC SPEED button repeatedly for the desired recording time and picture quality. In general, picture quality improves as the recording time decreases. In AUTO mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc and length of the timer recording. Recording Mode (DVD) <DVD-RAM/RW/+R> HQ (high quality mode) HSP SP (standard quality mode) LSP ESP LP EP SLP (long duration mode) Recording Times DVD-RAM/RW/R Approx. 1 hour Approx. 1 hour 30 minutes Approx. 2 hours Approx. 2 hours 30 minutes Approx. 3 hours Approx. 4 hours Approx. 6 hours Approx. 8 hours
icon and Timer Set will appear on the front panel display, indicating a timer recording is set. Recording automatically begins when the set time is reached. fit onto the free disc space. To record on a tape, please see the owner's manual.

m Move

6 Disc compatibility
Not all brands of discs will be compatible with this unit. The latest rmware upgrade to improve recording & playback quality can be downloaded from our web site. (Download Center at www.samsung.com) If disc compatibility problems continue, or there is an issue upgrading your recorder, contact the Call Center at 1-800-SAMSUNG.

If AUTO mode is selected, the video quality is adjusted automatically so that scheduled recordings

Anynet+(HDMI CEC)

Anynet+ is a function that can be used to operate the recorder using a Samsung TV remote control, by connecting the DVD Recorder & VCR to a SAMSUNG TV using an HDMI Cable. (see page 21) (This is only available with SAMSUNG TVs that support Anynet+.) 1. Press the buttons to select Anynet+(HDMI CEC), then press the ENTER button. Anynet+(HDMI CEC) items will be displayed. 2. Press the buttons to select On, then press the ENTER button.

Features

Title List Timer Edit Dubbing Disc Setting Setup > Move sEnter rReturn eExit DVD Auto Chapter Format DVD-RW EZ Record VCR Function Set Top Box Control Anynet+ (HDMI CEC) : On On Language Follow : On Off : 5 Min : VR : Off
Unformatted Disc. Formatting. Please wait.
- The dual layer DVDRs have approximately double the capacity of single layer DVDRs. (See page 47.)

5 - English

6 - English

7 - English

8 - English

AK68-01614A

01614A-VR375-XAA-ENG-QG.indd 5-8

2008-01-31 11:12:12