DVD-Video, Audio CD

Wipe off dirt or contamination on the disc with a soft cloth.
Cautions on handling discs
Do not write on the printed side with a ball-point pen or pencil. Do not use record cleaning sprays or antistatic. Also, do not use volatile chemicals, such as benzene or thinner. Do not apply labels or stickers to discs. (Do not use discs xed with exposed tape adhesive or leftover peeled-off stickers.) Do not use scratch-proof protectors or covers. Do not use discs printed with label printers available on the market. Do not load warped or cracked discs.

Handling Cautions

Before connecting other components to this recorder, be sure to turn them all off. Do not move the recorder while a disc is being played, or the disc may be scratched or broken, and the recorders internal parts may be damaged. Do not put a ower vase lled with water or any small metal objects on the recorder. Be careful not to put your hand into the disc tray. Do not place anything other than the disc in the disc tray. Exterior interference such as lightning and static electricity can affect normal operation of this recorder. If this occurs, turn the DVD Recorder & VCR off and on again with the /I button, or disconnect and then reconnect the AC power cord to the AC power outlet. The recorder will operate normally. Be sure to remove the disc and turn off the recorder after use. Disconnect the AC power cord from the AC outlet when you dont intend to use the recorder for long periods of time.

Disc Storage

Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment. Do not keep under direct sunlight. Keep in a cool ventilated area. Store vertically. Keep in a clean protection jacket. If you move your DVD Recorder & VCR suddenly from a cold place to a warm place, condensation may generate on the operating parts and lens and cause abnormal disc playback. In this case, do not connect the plug to the power outlet and wait for two hours. Then insert the disc and try to play again.

English - 3

01293A-VR350-355-XEU-ENG.indb 3

2007-03-13 5:38:19

Protection

Programme-protected: See page 66 Locking a Title Disc-protected: See page 75 Disc Protection DVD-RAM/DVDRW/DVDR discs that are incompatible with the DVD-VIDEO format can not be played with this product. For more information on DVD recording compatibility, consult your DVD-RAM/DVDRW/DVDR manufacturer.

English - 5

01293A-VR350-355-XEU-ENG.indb 5

2007-03-13 5:38:22

Contents
Warning... 2 Precaution.. 3 Important Safety Instructions.. 3 Handling Cautions.. 3 Maintenance of Cabinet... 3 Disc Handling.. 3 Disc Storage... 3 Disc Specications.. 4 General Features... 8 Before Reading the Users Manual. 9 How to use the DVD Recorder & VCR. 9 Unpacking.. 10 Description... 12 Front Panel (DVD-VR350).. 12 Front Panel (DVD-VR355).. 12 Front Panel Display.. 13 Rear Panel (DVD-VR350).. 13 Rear Panel (DVD-VR355).. 14 Tour of the Remote Control. 15 Setting the Date and Time.. 23 Auto Setup.. 23 Manual Setup.. 24 VIDEO Output CH.. 25 Setting Up the Language Options. 25 Setting Up the Audio Options.. 26 Setting Up the Display (Video) Options. 27 Progressive scan.. 28 Setting Up the Parental Control.. 30 VCR Setting.. 31 DVD EP Mode Time.. 32 Automatic Chapter Creator.. 32 Quick Recording... 33 Anynet+(HDMI-CEC) (DVD-VR355 only).. 33

Playback

DVD Playback Region code (DVD-Video only).. 35 Logos of Discs that can be played.. 35 Disc types that can be played.. 35 Playing a Disc.. 36 Using the Disc Menu and Title Menu.. 37 Using the Search & Skip Functions. 37 Slow Motion Play/Step Motion Play. 38 Using the ANYKEY button.. 39 Repeat Play.. 40 Selecting the Subtitle Language.. 40 Selecting the Audio language.. 41 Changing the Camera Angle.. 41 Zooming-In... 41 Using the Bookmarks.. 42 Using the Markers.. 43 Playing back an Audio CD (CD-DA)/MP3.. 44 Buttons on the Remote Control used for Audio CD(CD-DA)/MP3 playback.. 44 Playing back an Audio CD (CD-DA).. 44 Playing back an MP3 Disc.. 45 Repeat Playback of an Audio/MP3 Disc.. 45 Play Option Mode... 46 To Programme Tracks.. 46 Playing back a Picture Disc. 46 Playing back an MPEG4 Disc.. 47

2007-03-13 5:38:46

Tour of the Remote Control
Your DVD Recorder & VCR remote control will work with Samsung televisions and compatible brands. 14. ANYKEY Button Press this to view the status of the disc that is being played. 15. REC Button Press this to make a recording on DVD-RAM/ DVDRW/R discs and VHS Video tape. 16. TO DVD copy Button Press this when you copy from the VCR to the DVD. 17. REC SPEED Button Press this to set the desired recording time and picture quality. 18. VCR Button Press this when you use a VCR. 19. INPUT SEL. Button Select input signal in external input mode (Tuner, AV1, AV2, AV3 or DV input). 20. OPEN/CLOSE Button To open and close the disc tray. 21. TV STANDBY/ON Button 22. TV/VCR Button 23. MARKER Button Press this to bookmark or mark a position while playing a disc. 24. PROG/TRK Button Press this to select a TV channel /Press this to remove the white line. 1. DVD Button Press this when you use a DVD. 2. TV Button Press this to operate TV. 3. STANDBY/ON Button 4. NUMBER Button 5. IPC Button 6. F.ADV/SKIP Button 7. Playback-related Buttons Forward/Rewind, Search, Skip, Stop, Play/Still, REC PAUSE 8. TV VOL (Volume) Button TV volume adjustment 9. MENU Button Brings up the DVD Recorder & VCRs setup menu. 10. OK/DIRECTION Buttons (/// Buttons) 11. INFO Button This will display current setting or disc status. 12. TITLE LIST/DISC MENU Button Press this to enter the Title List/Disc menu. 13. SUBTITLE Button Press this to switch the DVDs subtitle language.

English - 15

25. TV MUTE Button This operates as sound mute (TV mode). 26. RETURN Button Returns to previous menu. 27. EXIT Button 28. PLAY LIST/TITLE MENU Button Press this to enter the Edit playlist/Title menu. 29. AUDIO Button Use this to access various audio functions on a disc (DVD mode). 30. EZ REC MODE Button 31. TIMER REC Button Press this when you use Timer Recording. 32. TO VCR copy Button Press this when you copy from the DVD to the VCR. 33. CANCEL Button
01293A-VR350-355-XEU-ENG.indb 15

2007-03-13 5:38:53

Connecting DVD Recorder & VCR to the TV using the RF Cable
Make sure that both the television and the DVD Recorder & VCR are switched off before connecting the cables. 1. Remove the aerial or network input cable from the television. 2. Connect this cable to the 75 aerial jack marked on the rear of your DVD Recorder & VCR. 3. Plug the RF Cable supplied into the DVD Recorder & VCR. jack on your

Satellite Receiver or other Equipment Aerial Connector

English - 17

01293A-VR350-355-XEU-ENG.indb 17

2007-03-13 5:38:57

Connecting the Audio/Video Cable
You can connect your DVD Recorder & VCR to the television using the audio/video cable if the appropriate input is available on the television.
Connecting the S-Video Cable
You will enjoy high quality images. S-Video seperates the picture element into black and white(Y) and colour(C) signals to present clearer images than composite video output mode. 1. Connect one end of the S-Video cable into the S-VIDEO output jack on the rear of the DVD Recorder & VCR. 2. Plug the other end of the S-Video cable into the appropriate input connector on the television. 3. Connect one end of the audio cable supplied into the AUDIO output jacks on the rear of the DVD Recorder & VCR. Take care to respect the colour coding of the up and down channels. 4. Plug the other end of the audio cables into the appropriate input connectors on the television.
1. Connect one end of the video cable into the VIDEO output jack on the rear of the DVD Recorder & VCR. 2. Plug the other end of the video cable into the appropriate input connector on the television. 3. Connect one end of the audio cables supplied into the AUDIO output jacks on the rear of the DVD Recorder & VCR. Take care to respect the colour coding of the up and down channels. 4. Plug the other end of the audio cables into the appropriate input connectors on the television.

white red

white S-Video cable (not supplied) red

white white red red

English - 18
01293A-VR350-355-XEU-ENG.indb 18

2007-03-13 5:38:59

Connecting the Component Video Cable
You will enjoy high quality accurate colour reproduction images. Component video seperates the picture element into black and white(Y), blue(PB), red(PR) signals to present most clear and clean images. 1. Connect Component video cables between the COMPONENT VIDEO OUT jacks on the rear of the DVD Recorder & VCR and COMPONENT VIDEO IN jacks on the rear of the TV. 2. Connect audio cables between the audio output jacks on the rear of the DVD Recorder & VCR and AUDIO IN jacks on the rear of the TV. Take care to respect the colour coding of the up and down channels. Press the input selector on your TV remote control until the Component signal from the DVD Recorder & VCR appears on your TV screen.

Playing a Disc

1. Press the OPEN/CLOSE button. 2. Place a disc gently into the tray with the discs label facing up. 3. Press OPEN/CLOSE button to close the disc tray. Your DVD Recorder & VCR closes the disc tray and plays the disc automatically. The recorder does not play discs automatically after being powered on initially. When the recorder is powered on and a disc is in the tray, the unit will be activated and wait in stop status. Press the PLAY button to start playback. 4. Press the STOP button to stop playback. When you stop playing a disc, the DVD Recorder & VCR remembers where you stopped, When you press the PLAY button again, it will pick up where you left off. (unless the disc is removed or the DVD Recorder & VCR is unplugged, or if you press the STOP button twice.) Do not move your DVD Recorder & VCR while playing, as this may cause damage to the disc. Make sure to press the OPEN/CLOSE button to open or close the disc tray. Do not push the disc tray while it is being opened or closed, as this may cause a product malfunction. Do not place foreign materials on or in the disc tray. Some functions may perform differently or be disabled depending on the disc type. If this occurs, refer to the instructions written on the disc case. Be especially careful that childrens ngers are not caught between the disc tray and the tray chassis when it closes. After turning power on, it will take a few seconds until the DVD Recorder & VCR operates.

English - 36

01293A-VR350-355-XEU-ENG.indb 36

2007-03-13 5:39:56

Using the Disc Menu and Title Menu
Some discs contain a dedicated menu system that allows you to select special functions for title, chapters, audio track, subtitles, lm previews, information on characters, etc.

For DVD-VIDEO disc

Disc Menu : Press the DISC MENU button to enter the disc menu of the disc. Move to the setup menu related to playback operation. You can select audio language and subtitle etc. provided by the disc. Title Menu : Press the TITLE MENU button to move to the title menu of the disc. Use this button if the disc contains more than one title. Some discs may not support the title menu.
For DVD-RAM/DVDRW/DVDR disc
Title List Press the TITLE LIST button to display title list. The Title List is simply a list of titles on a disc. If a title cannot be played again. Playlist (DVD-RAM/-RW(VR)) Press the PLAY LIST button to display playlist. A playlist is a custom-made list of titles. When one playlist is played, only the titles withn the playlist will play and then stop. Even if that playlist is deleted, the original recording will not be deleted.

Using the Search & Skip Functions
Searching through a Chapter or Track
During playback, press the SEARCH or button on the remote control. Each time you press the SEARCH button, the playback speed will change as follows. Fast 1/ Fast 1 DVD-VIDEO/DVD-RAM/ Fast 3/ Fast 3 DVDRW/DVDR Fast 5/ Fast 5 MPEG4 AUDIO CD (CD-DA) Fast 1 X2 Fast 2 X4 X8 Fast 2/ Fast 2 Fast 4/ Fast 4 Fast 6/ Fast 6 Fast 3
You can scan the programme in reverse order. To return to normal speed playback, press the button. ll

English - 37

01293A-VR350-355-XEU-ENG.indb 37

2007-03-13 5:39:58

No sound is heard during Scan (Search) mode, except CDs (CDDA). (You can hear the sound during forward search (Fast 1) in disc.) No sound is heard during scanning in all MPEG4 modes. Depending on the disc type, the sound quality may lower during Fast 1 mode.
Skipping Chapters or Tracks
During playback, press the l or l button on the remote control. If you press the l button If you press the l button, it moves to the beginning of the chapter, track or marker (DVD-RAM/-RW(VR mode)). Pressing the button once again within 3 seconds returns to the beginning of the previous chapter, track or marker (DVD-RAM/-RW(VR mode)). If you press the l button If you press the l button, it moves to the next chapter, track or marker (DVD-RAM/-RW(VR mode)).
Skipping ahead 30 seconds
In play mode, press F.ADV/SKIP button to skip ahead exactly 30 seconds.
Slow Motion Play/Step Motion Play

Slow Motion Play

During Still mode, press the SEARCH or button on the remote control for more than 1 second. Each time you press the button : l Slow 1 l Slow 2 l Slow 3 Each time you press the button : l Slow 1 l Slow 2 l Slow 3 To return to normal speed playback, press the ll button. Slow motion can play only in the forward direction on MPEG4 discs.

English - 38

01293A-VR350-355-XEU-ENG.indb 38

2007-03-13 5:40:00

Step Motion Play
During Still mode, press the F.ADV/SKIP button on the remote control. Each time the button is pressed, a new frame will appear. To return to normal speed playback, press the ll button. No sound is heard during STEP or SLOW mode.

N : 10

Clearing a Marker
1. Press the MARKER button during playback. 2. Press the buttons to select a marked scene. Press the CANCEL button to delete the selected mark. When a marker is cleared while DVD-RAM/DVD-RW(VR mode) is playing, marker numbers will change. For example, if the 7th marker is cleared after ten markers are registered, the marker numbers after the eighth will automatically move ahead by one and the 8th marker becomes the 7th.

English - 43

01293A-VR350-355-XEU-ENG.indb 43

2007-03-13 5:40:12

Playing back an Audio CD (CD-DA)/MP3
Buttons on the Remote Control used for Audio CD(CD-DA)/MP3 playback
1. l button : Returns to the beginning of the current track when pressed during playback. If pressed again, your DVD recorder moves to and plays the previous track. If you press this button within three seconds after playback starts, the previous track will be played. If you press this button after three seconds, the current track will be replayed from the beginning. 2. l button : Plays the next track. 3. Press the ( / buttons : Fast Play (X2, X4, X8) (Audio CD only) ) 4. button : Stops a track (song). 5. RETURN button : Moves to the folder to which the current song belongs. 6. button : Plays a track (song) or Still playback. ll 7. button : Selects a track (song). 8. , OK button : Plays the selected track (song). 9. ANYKEY button : To display the play mode window. (Repeat or Play Option).
TRACK 1 No. MOVE Title TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 OK
Music List 01/15 Length 0:03:50 0:04:00 0:03:49 0:03:47 0:04:29 0:03:44 0:03:44 EXIT
Playing back an Audio CD (CD-DA)
1. Insert an audio CD (CD-DA) into the disc tray. The audio CD menu appears and the tracks (songs) are played automatically. 2. Press the buttons to select the track (song) to start playback from, and then press the OK button.

0:00:15

TRACK 1

PLAY MODE

Audio CD (CD-DA) Screen Elements
TRACK 1 No. MOVE Title TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 OK Music List 01/15 Length 0:03:50 0:04:00 0:03:49 0:03:47 0:04:29 0:03:44 0:03:44 EXIT
1. Play mode icon. 2. Current track (song) : Displays the number of the track currently being played. 3. Displays the current play index and total track number. 4. This shows the operating state of a disc and a playback time corresponding to a portion that is currently played. 5. Displays the track list (song list) and the playing time of each track. 6. Button display

II 0:00:01

TRACK 1 No. Title 001 TRACK 1 PLAY MODE

To Programme Tracks

You can register a maximum 30 tracks in the playlist. 1. In the still mode, press the ANYKEY button. The Play option will be highlighted. 2. Press the buttons to select Playlist, then press the OK button. Playlist screen is displayed. 3. Press the buttons to select tracks in the order in which you want them to play, then press the OK button. If you playlisted a wrong track, press the buttons, then press the buttons to select the wrong track, then press the CANCEL button. 4. Press the PLAY button to play the playlist.
002 TRACK 2 Repeat : Off 003 TRACK 3 Play Option : NormalTRACK 005 TRACK TRACK TRACK 7 MOVE OK
CDDA CDDA CDDA CDDA CDDA CDDA CDDA CDDA

Playlist 04/15

TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 TRACK 004 TRACK 1 TRACK 2 TRACK 3 TRACK 4
Playing back a Picture Disc
JPEG JPEG01 Photo List 01/10
1. Insert a JPEG Disc into the disc tray.
ROOT JPEG01 JPEG02 JPEG03
2. Press the buttons to select the Disc Navigation, and then press the OK or button. 3. Press the buttons to select the Photo, and then press the OK or button. 4. Press the buttons to select a picture. To see the next 8 pictures, press the l button. To see the previous 8 pictures, press the l button.

JPEG04 Slide Show

JPEG05 MOVE

JPEG06 OK

JPEG07 RETURN EXIT

English - 46

01293A-VR350-355-XEU-ENG.indb 46

2007-03-13 5:40:20

DVD-RW(VR)
5-1. If you press the button, the Slide Show Speed screen will appear. ll Press the buttons to set the slide show speed, then press the OK button. 5-2. Press the OK button with a picture selected in the Album screen and select a display mode (Album screen ( ), Slide show ( ), ) or Zoom ( )) using the buttons, then press Rotation ( the OK button.
Slide Show Speed Slow Normal Fast

JPEG01 MOVE PHOTO OK

: Returns to the Album screen. : The unit enters slide show mode. Before the slide show begins the picture interval (Slide show speed) must be set. : Each time the OK button is pressed, the picture rotates 90 degrees clockwise. : Each time the OK button is pressed, the picture is enlarged up to 4X(four times the normal size).
JPEG01 MOVE PHOTO OK RETURN
normal size 2X 4X 2X Press the ANYKEY button to display the menu bar. Press the RETURN button to clear the menu bar.
Playing back an MPEG4 Disc
DIVX01 No. 001 Title ROOT movie_1 DivX List 00/01 Size
MPEG4 les contain the audio and video data. MPEG4 les with the following extensions can be played. -.avi,.divx,.AVI,.DIVX 1. Insert an MPEG4 Disc into the disc tray.
2. Press the buttons to select the Disc Navigation, and then press the OK or button.

OK RETURN EXIT

Uninitialised Disc Do you want to initialise this disc?

DVD-RW(V mode)/-R

Chapters will be created automatically when you nalise recording on DVD-RW/-R discs in V mode. Simple editing (erasing titles/changing title name).
You can also make your own chapters on DVD+RWs and edit them using the Chapter Edit menu. (see pages 67 to 69) You can initialise discs automatically using EZ REC MODE (see page 59).

Recording Mode

Select one of four recording modes by pressing the REC SPEED button repeatedly while the unit is in Stop mode for the desired recording time and picture quality. In general, picture quality improves as the recording time decreases. In AUTO Mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc and length of the timer recording. This function selects one mode from XP, SP, LP and EP mode and is used in timer recording mode only. Mode XP (high quality mode) SP (standard quality mode) LP (long recording mode) EP (extended mode) AUTO Characteristic Select when the video quality is important. Select to record in standard quality. Select when a long recording time is required. Select when a long recording time is required. Recording Times Data Rates Approx. 1 hour about 8 Mbps Approx. 2 hours about 4 Mbps Approx. 4 hours about 2 Mbps Approx. 6 hours/ about 1,2 Mbps Approx. 8 hours/ about 0,8 Mbps
for timer recording only Approx 1 to 8 hours see page 56. Approx 0,8 to 8 Mbps
The dual layer DVDRs have approximately double the capacity of single layer DVDRs. (See page 35.)

English - 51

01293A-VR350-355-XEU-ENG.indb 51

2007-03-13 5:40:32

Unrecordable video
Pictures with copy protection cannot be recorded on this DVD Recorder & VCR. When the DVD Recorder & VCR receives a copy guard signal while recording, recording stops and the following message appears on the screen.
You cannot record copy protected movie.
Concerning Copy Control Signals
TV broadcasts that contain copy control signals may have one of the following three signal types, Copy-Free, Copy-Once and Copy-Never. If you want to record a copy-once type programme, use DVD-RW with CPRM in VR Mode and DVD-RAM discs. Media DVD-RAM (Ver.2.0) DVD+RW DVD+R DVD-RW (Ver.1.1) DVD-RW (Ver.1.1) with CPRM VR mode DVD-R

Signal type

Copy-Free O O O O

Copy-Once O* -

Copy-Never -
Once Copy Once has been recorded, additional recording cannot be performed. * Compatible with CPRM. Content Protection for Recordable Media (CPRM) CPRM is a mechanism that ties a recording to the media on which it is recorded. It is supported by some DVD recorders, but not by many DVD players. Each blank recordable DVD has a unique 64-bit media ID etched in the BCA. When protected content is recorded onto the disc, it can be encrypted with a 56-bit C2 (Cryptomeria) cipher derived from the media ID. During playback, the ID is read from the BCA and used to generate a key to decrypt the contents of the disc. If the contents of the disc are copied to other media, the ID will be absent or wrong and the data will not be decryptable.

English - 56

01293A-VR350-355-XEU-ENG.indb 56

2007-03-13 5:40:41

Editing the Scheduled Record List
DVD-RAM(VR) Scheduled Record List Current Time 12:00 No. To Source Day Start End Speed V/P Edit
No. 01 To DVD Source PR 01 Day Daily 00:48 SP Start End Speed V/P SP Off
DVD-VR355 only Follow these directions to edit the timer record list. 1. With the unit in Stop mode, press the MENU button.
2. Press the buttons to select Programme, then press the OK or button. 3. Press the buttons to select the Scheduled Record List, then press the OK or button. 4. Press the buttons to select the number of the scheduled record list you want to edit, then press the OK or button. The Edit and Delete items are displayed. 5. Press the buttons to select Edit, then press the OK or button. The Timer Recording screen is displayed. Edit the items you want to modify. See the Timer Recording section for more information on Timer Recording Input items.(See pages 55~56) 6. Press the OK button to conrm the edited setting. 7. Press the EXIT button after nishing the operation. The menu screen will disappear.
Deleting the Scheduled Record List
03 DVD DVD PR 01 PR 02 Daily No.01 14:00 SP 12:00 Daily 15:00 16:00 SP : Do you want to delete :No.01? Off Off
DVD-VR355 only Follow these directions to delete a title from the timer record list. 1. With the unit in Stop mode, press the MENU button.
2. Press the buttons to select Programme, then press the OK or button. 3. Press the buttons to select the Scheduled Record List, then press the OK or button. 4. Press the buttons to select the number of the scheduled record list you want to delete, and then press the OK button. The Edit and Delete items are displayed. 5. Press the buttons to select Delete, then press the OK or button. You will be prompted with the delete conrm message such as (Do you want to delete No.01?). 6. Press the buttons to select Yes, then press the OK button. The selected title will be deleted from the list. 7. Press the EXIT button after nishing the operation. The menu screen will disappear. You can not delete programmes that are currently being recorded.

English - 57

01293A-VR350-355-XEU-ENG.indb 57

2007-03-13 5:40:43

Using the Video Plus+Feature
DVD-RAM(VR) Title List Playlist Disc Manager Programme Setup Copy MOVE OK RETURN EXIT VideoPlus+ Scheduled Record List VideoPlus+ Extended : Off
DVD-VR355 only Before presetting your DVD Recorder & VCR: Switch on both the television and your DVD Recorder & VCR. Check that the date and time are correct. Up to twelve programmes can be preset. 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Programme, then press the OK or button. 3. Press the buttons to select VideoPlus+, then press the OK or button. A message is displayed to allow you to enter the Video Plus+ code. 4. Press the number buttons to enter the code of the programme that you want to record in your television magazine. If you want to correct the Video Plus+ code that you are entering: Press the button until the digit to be corrected is cleared. Enter the correct digit. 5. Press the OK button. The information concerning the programme is displayed. When using the Video Plus+ function for the rst time with stored stations, the programme number ashes. This one time, you must enter the PR number manually by pressing the buttons. 6. If the programme and times are correct, press the OK button. 7. Turn the power off by pressing the STANDBY/ON button to activate the timer recoding setting. 8. Refer to pages 55~56 if you want to: Check whether the timer Recording has set correctly or not. Cancel a preset recording. The numbers next to each TV programme listing in the magazines or newspapers are Video Plus+ code numbers, which allow you to programme your DVD Recorder instantly with the remote control. Enter the Video Plus+ code for the programme you wish to record. Video Plus+ is a trademark of Gemstar Development Corporation. The Video Plus+system is manufactured under licence from Gemstar Development Corporation.
DVD-RAM(VR) Title List Playlist Disc Manager Programme Setup Copy NUMBER OK RETURN

VideoPlus+

Enter VideoPlus+ Code number. [0-9]
DVD --PR 01 Daily 12:00 - - - - - - - - - -:- 14:00 - -:- SP -Off -

Video Plus+ Extended

To prevent delays or over-runs the DVD Recorder & VCR has a function called Video Plus+ Extended allowing you to extended the recording time by up to 60 minutes. Only use if PDC is not available or set to OFF. 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Programme, then press the OK or button. 3. Press the buttons to select the VideoPlus+ Extended, then press the OK or button. 4. Press the buttons to select the Video Plus+Extended time, then the press OK or button. 5. Press the EXIT button to exit the menu.

Copy All MOVE OK RETURN EXIT

Direct copy VCR to DVD

Insert the VHS tape you want to copy. Insert Recordable DVD disc. Press DVD copy button on front panel or remote control. (TO DVD) To stop recording press the STOP button.

English - 63

01293A-VR350-355-XEU-ENG.indb 63

2007-03-13 5:40:56

This section introduces basic functions of DVD editing and explains both edit functions for the recording on a disc and edit functions for the entire disc.

Playing the Title List

DVD-RAM(VR) JAN/01/2007 No. Title Title List 3/4 Length Edit 01 JAN/01/2007 12:00 00:00:JAN/01/2007 12:30 00:00:09 Play 03 JAN/01/2007 01:30 00:01:36 Rename 04 JAN/01/2007 01:3000:00:11 Delete Edit Protection MOVE OK RETURN EXIT
Follow these instructions to play back a title from the Title List. 1. Press the TITLE LIST button. The Title List screen is displayed. 2. Press the buttons to select a title you want to play from Title List, and then press the PLAY button. 3. Press the STOP button to stop playing. To return to the title list screen, press the TITLE LIST button.
JAN/01/2007 01:00 PR1 JAN/01/2007 XP
Title List 3/4 Length Edit
Title List Screen Elements
Playback screen for recorded titles Information window for the selected title: Title name, recording date, lock status, recording mode Recorded title No. Recorded title name Recording Length (i.e., the playing time) Edit menu Play: Plays the selected title. Rename: Changes the name of a selected title. Delete: Deletes the selected title from the list. Edit: Deletes a section of title. Protection: Locks or unlocks the selected title. Button display By pressing the ANYKEY button, you can play desired title. (see page 39) This may depend on the type of disc. DVD-RW(V)/DVD+RW/R has limited editing function.
01 JAN/01/2007 12:00 00:00:JAN/01/2007 12:30 00:00:JAN/01/2007 01:00 00:01:JAN/01/2007 01:30 00:00:11
01 JAN/01/2007 12:00 00:00:JAN/01/2007 12:30 00:00:09 Play 03 JAN/01/2007 01:00 00:01:36 Rename 04 JAN/01/2007 01:30 00:00:11 Delete Edit Protection OK RETURN

English - 64

01293A-VR350-355-XEU-ENG.indb 64

2007-03-13 5:40:58

Recording on Free space
DVD+RW Free Space No. Title Title List 5/7 Length Edit 12:30 00:00:03 12:00 00:00:15 12:30 00:00:16 00:00:15 Recording 12:30 00:08:16 03:40:27 EXIT 01 APR/19/2007 12:00 00:00:APR/19/APR/20/APR/20/Free Space 06 APR/21/Free Space OK
This function is only available with DVD+RW discs. If existing titles are deleted, new free space will be created. When you operate free space function, on-air TV images will appear on the left side of the title list.

Free Space PR 10 SP MOVE

DVD-VR355 only 1. Press the TITLE LIST button. The Title List screen is displayed. 2. Press the button to select Free Space, then press the OK or button. On-air TV images will appear on the left side of the title list. 3. Press the OK button.
Basic Editing (Title List)
DVD-RAM(VR) Sports(A1) Rename
Renaming (Labeling) a Title
Follow these instructions to rename a title list, i.e., to edit the title of a recorded programme.
Save Back Space MOVE OK Space Delete RETURN Clear EXIT
DVD-VR355 only 1. Press the TITLE LIST button. The Title List screen is displayed. 2. Press the buttons to select a title you want to rename from the Title List, then press the OK or button. 3. Press the buttons to select Rename, then press the OK or button. The Rename screen is displayed. 4. Select the desired characters using the buttons, press the OK button. Back Space: Deletes the character before the cursor. Space: Enters a blank and moves the cursor one forward (to the right). Delete: Deletes the character at the cursor position. Clear: Deletes all the character inputs. Save: Registers the character inputs. 5. Press the buttons to select Save, and then press the OK button. The changed title name is displayed in the title eld of the selected title.
DVD-RAM(VR) Sports(A1) No. Title
Sports(A1) JAN/01/2007 XP
01 JAN/01/2007 12:00 00:00:JAN/01/2007 12:30 00:00:Sports(A1) 00:01:JAN/01/2007 01:30 00:00:11

English - 65

01293A-VR350-355-XEU-ENG.indb 65

2007-03-13 5:41:02

Locking (Protecting) a Title
DVD-RAM(VR) JAN/01/2007 Title List 3/4
Follow these instructions to lock a title to protect it from accidental deletion.

Title Protection :

JAN/01/2007 01:00 PR1 JAN/01/2007 XP On Off
1. Press the TITLE LIST button. The Title List screen is displayed. 2. Press the buttons to select a title you want to rename from the Title List, then press the OK or button. 3. Press the buttons to select Protection, then press the OK or button. 4. Press the buttons to select On, then press the OK button. The key icon on the information window for the selected title changes to the locked status. ( )

DVD-RAM(VR) JAN/01/2007

Title List 3/4

Deleting a Title

Follow these instructions to delete a title from the Title List.
Do you want to delete? (Related playlists may be deleted.)
JAN/01/2007 01:00 PR1 JAN/01/2007 XP Yes No
1. Press the TITLE LIST button. The Title List screen is displayed. 2. Press the buttons to select a title you want to rename from the Title List, then press the OK or button. 3. Press the buttons to select Delete, then press the OK or button. You will be prompted with a conrmation message. DVD-RAM(VR), DVD-RW(VR mode): Since Playlist is present, the message Do you want to delete? (Related playlists may be deleted.) is displayed. DVD-RW(Video mode),DVD+RW, DVDR: Since Playlist is not present, the message Do you want to delete? is displayed. The message depends on the type of disc. 4. Press the buttons to select Yes, then press the OK button.

Samsung DVD Recorders / Combo
Model DVD Recorder DVD-R155 SAMSUNG DVD Recorder * Multi Format Recording * Up-converts signals to digital output (1080i) * HDMI Video Output * DV Input SAMSUNG DVD Recorder * 160GB HDD * Multi Format Recording * Up-converts signals to digital output (1080i) * HDMI Video Output * DV Input SAMSUNG DVD Recorder * 250GB HDD * Multi Format Recording including DVD-RAM * Up-converts signals to digital output (1080i) * HDMI Video Output * DV Input SAMSUNG DVD Recorder * SD Digital Tuner Built In * 160GB HDD * Multi Format Recording * Up-converts signals to digital output (1080i) * HDMI Video Output * DV Input SAMSUNG DVD Recorder * SD Digital Tuner Built In * 250GB HDD * Multi Format Recording * Up-converts signals to digital output (1080i) * HDMI Video Output * DV Input SAMSUNG DVD Recorder & VCR Combo * Dual Format DVD Recorder * HiFi VCR * DivX Playback * Dual Control Remote $299.00 Description RRP Inc

DVD-HR753

$499.00

DVD-HR755

$599.00
DVD Recorder with SD Digital Tuner DVDSH853

$699.00

DVDSH855

$829.00

DVD / VCR Combo DVD-VR355 $399.00
Samsung DVD Players / Blu-ray / Combo
Model DVD Player DVD-P171 SAMSUNG DVD Player * MP3 / WMA / JPEG / DivX Playback * 12Bit / 108Mhz Video DAC for life like pictures * Progressive Scan * Digital Audio Output SAMSUNG DVD Player * MP3 / WMA / JPEG Playback * Up-converts signals to full digital output (1080p) * HDMI Video Output * Digital Audio Output SAMSUNG Blu-ray DVD Player * Dolby Digital, Dolby TrueHD, DTS HD support * HDMI 1.3 * 1080p Display Capability * Upconverts DVD's up to 1080p via HDMI * Full compatibility with 24 movie frames per second playback $119.00 Description RRP Inc

DVD-1080P7

$219.00
DVD Player - Blu-ray BD-P1400 $699.00
DVD / VCR Combo DVD-V6700 SAMSUNG DVD Player & VCR Combo * SlimLine * Fully Featured DVD Player * DivX Playback * HiFi VCR $179.00