Product sheet Art #:757 SAMSUNG HMX-H1000P 24 TFT WIDESCREEN1920*1200
Technical Information Picture compression format H.264 (MPEG-4.AVC) Audio compression format AAC (Advanced Audio Coding) Image device 1/4.1 CMOS (Complementary Metal-Oxide Semiconductor) (Max: 3.05M pixels / Effective: 2.89M pixels) Lens F1.8 10x (Optical), 10x (Digital) Electronic zoom lens Focal length 3.3~33mm / Filter diameter 37 LCD screen: Size/dot number 2.7inch wide 230k Composite output 1Vp-p (75 terminated) Component output Y: 1Vp-p, 75, PB/PR, Cb/Cr: 0.350Vpp, 75 HDMI output C type connector Audio output -7.5dBs (600 terminated) USB output Mini-B type connector General Power source DC 8.4V, Lithium Ion battery pack 7.4V Power source type Lithium Ion battery pack, Power supply (100V~240V) 50/60Hz Power consumption (Recording) 3.5W (LCD on) Operating temperature 0~40C (32F~104F) Storage temperature -20C ~ 60C (-4F ~ 140F) External dimensions (WxHxD) 63 mm (2.48 inches) x 60.9mm (2.40 inches) x 128.6 mm (5.06 inches) Weight 352g (0.78 lb, 12.42 oz) (Except for Lithium Ion battery pack) Internal MIC Omni-directional stereo microphone Remote control Indoors: greater than 15 m (49 ft) (straight line), Outdoors: about 5 m (16.4 ft) (straight line) Storage media SSD built-in memory, memory card (SD/SDHC)

Product Information

This HD camcorder offers 1080i resolution with a sharp image. It also supports widescreen recording with an aspect ratio of 16:9. Recordings made in Full HD (high definition) image quality will fit widescreen (16:9) HDTVs. To enjoy HD-quality images, use an HDMI (optional) or Component/AV (Y/PB/PR, Audio L/R) cable. When using the Component/AV HD-quality images cannot be viewed and are down-converted to SD The image is recorded in 720x576p when the quality is set to SD in the HD camcorder. 1/4.1 CMOS sensor 2.2 Mega pixel provides stunning detail and clarity image. SSD (SOLID STATE DRIVE) as built-in storage media SD/SDHC memory card H.264 (MPEG4 part10/AVC) encoding This HD camcorder supports Anynet+.Anynet+ is an AV network system that enables you to control all connected Samsung 2.7 wide (16:9) touch panel LCD screen (230K pixels) Touch panel adoptedYou can play recorded images and set functions by simply tapping on the LCD screen. Built-in editing software (Intelli-studio) Editing software is stored in this camcorder. Connecting the camcorder to a Windows computer using USB cable runs the editing software application. The application enables playback, editing and sharing of the recordings.
Centas Konferens-TV AB Orgnr:556206-7289 Ste Stockholm www.centas.se
Fryksdalsbacken 43 Farsta Tel:Fax:08 7240410
Norra Gubberogatan 63 Gteborg 031 841144
Regnvattengatan 23 Malm 040 143810

Do not overload outlets or extension cords as this may result in abnormal heat or re.
Using the camcorder at temperatures over 140F(60 C) may result in re. Keeping the battery at a high temperature may cause an explosion.
Do not allow water or metal and inammable matter to enter the camcorder or AC power adaptor. Doing so may pose a re hazard.
No sand or dust! Fine sand or dust entering the camcorder or AC power adaptor could cause malfunctions or defects.
No oil! Oil entering the camcorder or AC power adaptor could cause electric shock, malfunctions or defects.
Do not aim the LCD screen directly into the sun. Doing so could cause eye injuries, as well as lead to malfunctioning of internal parts of the product.
Do not bend the power-cord or damage the AC power adaptor by pressing on it with a heavy object. There may be a risk of re or electric shock.
Do not disconnect the AC adaptor by pulling on its power-cord, as this could damage the power-cord.

English _vii

Do not use the AC adaptor if it has damaged, split or broken cords or wires. Doing so may cause re or electric shock.

an cle ing flui d

Do not connect the AC adaptor unless the plug can be fully inserted with no part of the blades exposed.
Do not dispose of battery pack in a re as it may explode.
Never use cleaning uid or similar chemicals. Do not spray cleaners directly on the camcorder.
Keep the camcorder away from water when used near the beach or pool or when it rains. There is a risk of malfunction or electric shock.
Keep the used lithium battery or memory card out of the reach of children. If the lithium battery or memory card is swallowed by children, consult physician immediately.
Do not attempt to disassemble, repair, or reform the camcorder or the AC adaptor to avoid a risk of re or electric shock.
Do not plug or unplug the power cord with wet hands. There is a risk of electric shock.
Keep the power-cord unplugged when not in use or during lightning storms to prevent re hazard.
When cleaning the AC adaptor, unplug the power-cord to avoid a risk of a malfunction or electric shock.
If the camcorder makes an abnormal sound, or smell or smokes, unplug the power-cord immediately and request service from a Samsung service centre. There is a risk of re or personal injury.
If the camcorder malfunctions, detach immediately the AC adaptor or battery from the camcorder to avoid re or injury.

viii_ English

Do not press the surface of the LCD with force, or hit it with a sharp object. If you push the LCD surface, display unevenness may occur.
Do not drop or expose the camcorder, battery pack, AC adaptor or other accessories to severe vibrations or impact. This may cause a malfunction or injury.

Do not use the camcorder on a tripod (not supplied) in a place where it is subject to severe vibrations or impact.
Do not use the camcorder near direct sunlight or heating equipment. This will especially shorten the operation range of the remote control which uses infrared rays.
Do not expose the camcorder to sand or water when recording at the beach or pool, or recording on a rainy day. Doing so may cause a malfunction or electric shock.
Do not leave the camcorder in a closed vehicle where the temperature is very high for a long time.
Do not expose the camcorder to soot or steam. Thick soot or steam could damage the camcorder case or cause a malfunction.
Do not use the camcorder near dense exhaust gas generated by gasoline or diesel engines, or corrosive gas such as hydrogen sulphide. Doing so may corrode the external or internal terminals, disabling normal operation.
Do not expose the camcorder to insecticide. Insecticide entering the camcorder could fail the product to operate normally. Turn the camcorder off and cover it with vinyl sheet, etc. before using insecticide.

INSECT

English _ix
Do not expose the camcorder to sudden changed in temperature or a humid place. There is also a risk of defect or electric shock when using outdoors during lightning storms.
Do not place the camcorder with the open LCD screen down.
Do not wipe the camcorder body with benzene or thinner. The exterior coating could peel off or the case surface could deteriorate.
Do not leave the LCD monitor open when not using the camcorder.
Do not hold the camcorder by the LCD monitor when lifting it. LCD monitor could detach and the camcorder may fall.
Do not use the camcorder near TV or radio. This could cause noise on the TV screen or in radio broadcasts.
Do not use the camcorder near strong radio waves or magnetism such as speakers and a large motor. Noise could enter video or audio that are being recorded.
Use Samsung-approved accessories only. Using products from other manufacturers may cause overheating, re, explosion, electric shock or ersonal injuries caused by abnormal operation.
Place the camcorder on a stable surface and a place with ventilation openings.
Keep important data separately. Samsung is not responsible for data loss.

x_ English

contents

English _17

About battery packs The battery pack should be recharged in an environment that is between 0C (32F) and 40C (104F). However, when it is exposed to cold temperatures (below 0C (32 F)), its usage time reduces and it may cease to function. If this happens, place the battery pack in your pocket or other warm, protected place for a short time, then reinsert it. Do not put the battery pack near any heat source (i.e. re or a heater). Do not disassemble, apply pressure to, or heat the battery pack. Do not allow battery pack terminals to be short-circuited. It may cause leakage, generate heat, or cause re. Maintaining the battery pack The recording time is affected by temperature and environmental conditions. We recommend only using the original battery pack that is available from your Samsung retailer. When the battery reaches the end of its life, please contact your local dealer. The batteries have to be dealt with as chemical waste. Make sure that the battery pack is fully charged before starting to record. To preserve battery power, keep your HD camcorder turned off when you are not operating it. Even when the power is switched off, the battery pack will still discharge if it is left inserted on the HD camcorder. If you do not use the HD camcorder for an extended time period, keep it with the battery completely depleted. For power saving purposes, the HD camcorder will automatically turn off after 5 minutes. (Only if you set. Auto Power Off from the menu to 5 Min.) When fully discharged, a battery pack damages the internal cells. The battery pack may be prone to leakage when fully discharged. Charge the battery pack at least once per 6 months to prevent complete discharge of the battery pack. About the battery life Battery capacity decreases over time and through repeated use. If decreased usage time between charges becomes signicant, it is probably time to replace it with a new one. Each batterys life is affected by storage, operating and environmental conditions.

Using an AC power source

We recommend that you use the AC power adaptor to power the HD camcorder from a household AC outlet when you perform settings on it, play back, or edit images, or use it indoors. page 15 Before detaching the power source, make sure that the HD camcorders power is turned off. Failure to do so can result in camcorder malfunction. CAUTION Use a nearby wall outlet when using the AC power adaptor. Disconnect the AC power adaptor from the wall outlet immediately if any malfunction occurs while using your HD camcorder. Do not use the AC power adaptor in a narrow space, such as between a wall and furniture. 18_ English

English _31

recording
Basic procedures to record a movie or photo image are described below and on the following pages. This camcorder provides one combined movie and photo record mode. You can easily record movies or photos in the same mode without having to change it.

RECORDING MOVIE IMAGES

You can record movie images in Record mode only. page 20 This HD camcorder provides two Recording start/stop buttons. One is on the rear side of the camcorder and the other is on the LCD panel. Select the one that works best for you.
1. Turn the HD camcorder on. Connect a power source to the HD camcorder. (A battery pack or an AC power adaptor) pages 14,18 Open the LCD screen and the HD camcorder is powered on automatically. page 19 - You can also turn the HD camcorder on by pressing the Power ( ) button. - The lens cover opens automatically when HD camcorder is powered on. Set the appropriate storage media. (HMX-H104BP/HMX-H105BP/HMX-H1052BP/HMX-H106SP/HMX-H1062SP only) page 27 (If you want to record on a memory card, insert the memory card.) 2. Check the subject on the LCD screen. 3. Press the Recording start/stop button. The recording ( ) indicator will display, and recording will start. To stop recording, press the Recording start/stop button again. 4. When recording is nished, turn the HD camcorder off by using the Power (

00:00:10

[300Min]
) button for about 1 second.

32_ English

Movie images are compressed in the H.264 (MPEG4 part10/AVC) format. Eject the battery pack when you have nished recording to prevent unnecessary battery power consumption. For on-screen information display, see page 21. For approximate recording time, see page 29. You can record movie images using the remote control. Sound is recorded from the internal stereo microphone at the left and right of the lens. Make sure that this microphone is not blocked. Before recording an important movie, make sure to test the recording function by checking if there is any problem with the audio and video recording. For various functions available during recording, see RECORDING MENU ITEMS on pages 59-79. Do not operate the Power ( ) button or remove the memory card while accessing the storage media. Doing so may damage the storage media or the data in the storage media. If the power cable/battery is disconnected or recording is disabled during recording, the system is switched to the data recovery mode. While data is being recovered, no other function is enabled. After data recovery, the system will be switched to the STBY mode. When the recording time is short, the data recovery might fail. You can select the resolution and quality of movie image to be recorded. pages 60~61 You can switch the play mode to the record mode by pressing the Recording start/stop button.

English _35

CAPTURING STILL IMAGES DURING MOVIE IMAGE RECORDING (DUAL RECORDING)
This function works only in Record mode. page 20 You can record still images on the storage media during recording movie image. 1. Press the Recording start/stop button. The recording ( ) indicator will display, and recording will start. 2. Press the PHOTO button at the scene you want during movie image recording. When the ( ) indicator disappears, the photo image has been recorded. Video keeps recording, even while photos are taken. To stop recording, press the Recording start/stop button again. Photo image is captured in 1920x1080 resolution regardless to the resolution of the movie recording. You cannot use the ash during dual recording. You cannot capture still images during Time Lapse REC.

36_ English

ZOOMING
This HD camcorder allows you to record using optical 10x power zoom and digital zoom with the Zoom lever or the Zoom button on the LCD panel. To zoom in Slide the Zoom lever towards T (telephoto). (Or press the T (zoom) button on the LCD panel.) To zoom out Slide the Zoom lever towards W (wide angle). (Or press the W (zoom) button on the LCD panel.) The further you slide the Zoom lever, the quicker the zoom action. Zoom magnication over 10x is done through digital image processing, and is therefore called digital zoom. You can achieve up to 100x magnication by using digital zooming. Set Digital Zoom to On. page 74 The focus changes when zooming after focusing manually. Focus automatically or seize the desired scene by zooming before focusing manually. page 69 During digital zoom, the image quality may suffer. When you zoom into a subject close to the lens, the HD camcorder may automatically zoom out depending on the distance to the subject. In this case, set Tele Macro to On. page 73 If you operate the Zoom (W/T) lever during recording, the sound of the zoom motor may be recorded as well. When using the zoom function, its speed can be decreased by slowly moving the Zoom (W/T) lever. A fast moving increases the zoom speed. However, the Zoom (W/T) button on the display cannot adjust the zoom speed.

W: Wide angle

T: Telephoto

English _37

SETTING THE ANTI-SHAKE (OIS: OPTICAL IMAGE STABILIZER)
This function works only in Record mode. page 20 Anti-shake (OIS) is a function that, within reasonable limits, compensates for shaking
movements produced when lming hand-held. Anti-shake (OIS) provides a more stable image when: - Recording with deep zooming - Recording a close up picture of a small object - Recording while walking, or moving - Recording through the window, from inside a vehicle
Press the Anti-shake (OIS) (
) button to toggle the Anti-shake (OIS) mode between On and Off.
The EASY Q mode automatically sets the Anti-Shake (OIS) to On. When Anti-Shake (OIS): On is set, there will be a slight difference between the actual movement and the movement on screen. Excessive camcorder shake may not be entirely corrected even if Anti-Shake (OIS): On is set. Firmly hold the HD camcorder with both hands. It is recommended that you specify Anti-Shake (OIS): Off when using the HD camcorder on a desk or tripod (not supplied). When you record images with high magnication and the Anti-shake (OIS) is set to On in dark locations, after-images may stand out. In this case, we recommend using a tripod (not supplied) and turning the Anti-shake (OIS) to Off.

38_ English

USING THE BUILT-IN FLASH
This function works only in Record mode ( ). page 20 You can take natural looking ash photo images with appropriate illumination using the built-in ash, whether they are night scenes, indoors or in other dark places. Press the Flash ( ) button. built-in Each time you press the Flash ( ) button, ash mode is ash changed to; Auto ( ), Red-eye ( ), Fill in ( ), Slow sync ( ), or Off ( ).

Flash mode

Settings Off Auto Red-eye reduction Fill in Records without ash. Automatically ashes when there is insufcient ambient light. Pre-ashes to reduce red-eye before the ash automatically ashes when there is insufcient ambient light. Always uses the ash regardless of the surrounding brightness. When the shutter speed is set to slow and the ash res at the adjusted shutter speed. Use to capture both the subject and background at night or in dim light. Use of a tripod(not supplied) is recommended to prevent a blurred photo image. Slow sync ash mode allows the user to take brighter background as well as brighter subject at night. Contents On-screen display

Slow sync

Do not re the ash with the ash bulb covered with your hand. Do not re the ash close to peoples eyes, otherwise the subject could suffer a temporary loss of eyesight. WARNING Never use the ash closer than 1 meter from children. The recommended distance to the subject when using the built-in ash is approximately 4 to 7 feet. The battery power will be consumed faster with repeated use of the ash. The ash function is not available with the following function: - Cont. Shot - During video recording - In case of capturing still images during video recording English _39
CAPTURING STILL IMAGES DURING MOVIE IMAGES PLAYBACK
This function works only in Play mode. page 20 If you press the PHOTO button during playback, the camcorder stops playing and saves one image of the current movie scene that is paused. Set the appropriate storage media. (HMX-H104BP/HMX-H105BP/HMX-H1052BP/HMX-H106SP/HMX-H1062SP only) page 27 (If you want to record on a memory card, insert the memory card.) 1. Touch the HD Movie ( HD) tab or SD Movie ( SD) tab. The thumbnail index view appears accordingly. To change the current thumbnail page, touch the up ( ) or down ( ) tab. 2. Touch the movie image you want to play back. 3. Press the PHOTO button halfway down. The playback screen is paused. 4. Press the PHOTO button fully down. When the ( ) indicator disappears, the still image is recorded on the storage media. Still image is captured in 1920x1080 resolution regardless to the resolution of the recorded movies. The Time Lapse movie images cannot be captured as a still image. The movie image is captured as a photo image at the 16:9 screen ratios. Photo images are compressed in JPEG (Joint Photographic Experts Group) format.

You can hear the recorded sound from the built-in speaker. If you close the LCD screen while playing, you will not hear the sound from the speaker.

42_ English

Various playback operations
Playback / Pause / Stop Play and Pause functions alternate when you touch the Playback ( )/Pause ( ) tab to stop playback. during playback. Touch the Return ( You can do the same operation by using the remote control. ( / ) ) tab
Search playback ) / Forward search ( ) tab During playback, each touch of the Reverse search ( increases the play speed. - RPS (Reverse Playback Search) rate: x2 x4 x8 x2 - FPS (Forward Playback Search) rate: x2 x4 x8 x2 You can perform the same operation by using the remote control. ( / ) To resume normal playback, touch the Playback ( ) tab or press Playback/Pause button ( ) on the remote control. Skip playback ) / Forward skip ( ) tab during playback. Touch the Reverse skip ( When playing the selected movie, if you touch the Forward skip ( ) tab, it moves to the next movie. If you touch the Reverse skip ( ), it moves to the beginning of the movie. If you touch the Reverse skip ( within 3 seconds from the start of a movie, it moves to the beginning of the previous movie. You can do the same operation by using the remote control. ( / )

English _43

Slow playback Touching the Reverse slow ( ) tab / Forward slow ( ) tab while paused will play the movie reverse/forward at the x1/2, x1/4 and x1/8 speed. 1/2, 1/4 1/8 You can play the movie forward at the x1/2, x1/4 and x1/8 speed by using the Slow ( ) 1/2, 1/4 1/8 button on the remote control. To resume normal playback, touch the Playback ( ) tab or press the Playback/ Pause ( ) button on the remote control. Frame by frame playback ) / Forward frame advance ( ) tab during Touch the Reverse frame advance ( pause to begin the reverse/forward frame advance. To resume normal playback, touch the Playback ( ) tab or press the Playback/Pause ( ) button on the remote control.

44_ English

VIEWING PHOTO IMAGES
This function works only in Play mode. page 20 You can play back and view photo images recorded on the storage media. 1. Open the LCD screen to turn on the power and press the MODE button to set Play ( ). You can also turn the HD camcorder on by pressing the Power ( ) button. Set the appropriate storage media. (HMX-H104BP/HMX-H105BP/HMX-H1052BP/HMX-H106SP/HMX-H1062SP only) page 27 (If you want to playback images on a memory card, insert the memory card.) 2. Touch the Photo ( ) tab. The thumbnail index view appears. To change the current thumbnail page, touch the up ( ) or down ( ) tab. 3. Touch a desired photo image. 4. Touch previous image ( )/next image ( ) tab to search the desired photo image. To view the previous image, touch the previous image ( ) tab. To view the next image, touch the next image ( ) tab. Place and hold your nger on the previous image ( )/next image ( ) tab to search for an image quickly. Actually the image number is changed during search with images not changed. 5. To return to the thumbnail index view, touch the Return ( ) tab. The play related tabs disappear on the screen a few seconds after play starts. They reappear when you touch any point on the screen. Loading time may vary depending on the image size. Photo (JPEG) les created in the other devices cannot be played back in this HD camcorder.

Divide Combine 1/1

Divide
00:15:00 / 00:30:00 100_0001 Divide

English _93

To delete a movie image you no longer need ) tab Delete. 1. Touch the Menu ( 2. Touch Select Files Touch a desired movie image to select it for deletion. The ( ) indicator is displayed on the selected images. Touching the thumbnail image toggles between the thumbnail image being selected for deletion (the ( ) indicator appears on image) or not (the ( ) indicator is removed from image). Touch the OK ( ) tab. 3. The message according to the selected option will appear. Touch Yes. The selected images will be deleted.
Example: You can divide a movie image into two in order to delete a section you no longer need.
1. Before dividing 2. After image is divided at 30 second point. 3. After deleting rst image.
1/2 Play Option Highlight 1/2 Playlist Delete

Delete

Select Files All Files 1/1

0~60 seconds

31~60 seconds 0~30 seconds The movie image is divided into two movie images.

0~30 seconds

You can not delete a protected image. You must rst release the protect function to delete it. page 99 Slow playback is useful when designating division points. The division point may drift before or after the designated point by approximately 0.5 seconds. Cannot divide the video: - You can not divide a video shorter than 6 seconds. - You can continue dividing a scene after the rst 3 seconds from the start of playback or before the last 3 seconds to the end of playback. - Photo images cannot be divided. - The time lapse movie images cannot be divided. When the movie image is divided, the rst image of the divided images is stored in the playlist again. You can also access it by using the Q.MENU button. Press the Q.MENU button. Touch Edit. Touch Divide. You can perform the Divide function when there is at least 9MB of memory space remaining on the built-in memory or memory card. A movie image can be divided into maximum 99 les.

94_ English

COMBINING TWO MOVIE IMAGES
This function works only in Play mode. page 20 You can combine two different movie images. 1. Touch the HD Movie ( HD) tab or SD Movie ( SD) tab. The thumbnail index view appears accordingly. 2. Touch the Menu ( ) tab Edit Combine. If the movie image thumbnail you want to edit is not on the screen, touch the up ( ) or down ( ) tab to scroll to the next group of options. 3. Touch movie images to be combined. The ( ) indicator is displayed on the selected movie images. Touching the movie thumbnail image toggles between the movie thumbnail image being selected for combining(the ( ) indicator appears on image) or not (the ( ) indicator is removed from image). You cannot select and combine two different resolution images. 4. Touch the OK ( ) tab. The message Combine selected two les? will appear. 5. Touch Yes. The thumbnail of the rst movie image will appear in the combined movie image.

Protect Copy 2/2 Edit File Info

Combine

It is impossible to combine movie images with different resolutions. For example, if there is one movie image recorded at [HD] 720/50p and two movie images at [HD] 1080/50i, you can combine only the two movie images recorded at [HD] 1080/50i, not the movie image at [HD] 720/50p. You can not combine protected images. You must rst release the protect function to paste it. page 99 The two movie images are combined in the selected order and restored as one movie image. The original movie images will not be preserved. Photo images cannot be combined. The time lapse movie images cannot be combined. You can also access it by using the Q.MENU button. Press the Q.MENU button. Touch Edit. Touch Combine. A maximum of 2 movie images can be combined at a time. You can perform the Combine function when there is at least 9MB of memory space remaining on the built-in memory or memory card. Combine is not available if the total size of the two les to be combined exceeds 1.8GB. English _95

PLAYLIST

Whats a Playlist? The playlist is created by gathering your favourite recorded movie images. Since the playlist is not created by copying data, it will consume little of the storage capacity. When creating or deleting a playlist, the original movie image will not be erased. In addition, adding or deleting movie images from a playlist does not affect the original movie images.
12. JAN.Movie image 1 Movie image 2 Movie image 3 Movie image 4
30.JAN.2009 JAN.2009.2009 Movie image 5 Movie image 6 Movie image 7

Playlist

96_ English

Creating the playlist

This function works only in Play mode. page 20 You can create a playlist on this HD camcorder by gathering your favourites from the recorded movie images. Since the playlist is not created by copying data, you will consume little of the storage capacity. 1. Press the Q.MENU button. 2. Touch Playlist HD or SD (creating playlist according to movie resolution) Menu ( ) tab Add. 3. Select and touch movie images to add to the playlist. The ( ) indicator is displayed on the selected movie images. Touching the movie thumbnail image toggles between the movie thumbnail image being selected for creating a playlist (the ( ) indicator appears on image) or not (the ( ) indicator is removed from image). 4. Touch the OK ( ) tab. The message Add selected les to Playlist? will appear. 5. Touch Yes. When creation of a playlist is completed, the thumbnail view of the playlist will appear. You can play a playlist in the same manner as you play a movie image. page 42 Up to 9999 movie images can be included in the playlist. You cannot select two different resolution images for placement in the playlist. You can add a movie image to the playlist in the same manner as above. You can also access it by using the Menu ( ) tab. Touch the Menu ( ) tab Playlist.

Play back or edit your recordings on the computer using the builtin Intelli-studio application. page 109
You can also upload your recordings to YouTube or other web sites using the Intelli-studio. page 110

English _105

WHAT YOU CAN DO WITH A WINDOWS COMPUTER
You can enjoy the following operations by connecting your camcorder to your Windows computer via the USB cable.

Main Functions

By using the built-in Intelli-studio editing software on your camcorder, you can enjoy the following operations. - Playing back recorded videos or photos. page 109 - Editing recorded videos or photos. page 109 - Uploading the recorded videos and photos to YouTube or Flickr, etc. page 110 You can transfer or copy the files (videos and photos) saved on the storage media into your computer. (the Mass Storage function) page 112

System Requirements

Item OS CPU RAM Video Card Display USB DirectX
The following requirements must be satisfied to use the built-in editing software (Intelli-studio): Requirement Microsoft Windows XP SP2 or Vista Intel Core 2 Duo 1.66 GHz or higher recommended, AMD Athlon X2 Dual-Core 2.2 GHz or higher recommended (Notebook: Intel Core2 Duo 2.2GHz or AMD Athlon X2 Dual-Core 2.6GHz or higher recommended) 1 GB and above recommended nVIDIA Geforce 7600GT or higher, Ati X1600 series or higher 1024 x 768, 16-bit colour or higher (1280 x 1024, 32-bit colour recommended) USB 2.0 DirectX 9.0c or higher
System requirements mentioned above are recommendations. Even on a system that satisfies the requirements, operation is not ensured depending on the system. On a slower computer than recommended, video playback may skip frames or operate unexpectedly. When the version of DirectX on your computer is lower than 9.0c, install the programme with the version of 9.0c or higher. It is recommended to transfer the recorded video data to a PC before playing back or editing the video data. For doing this, a laptop computer requires higher system requirements than a desktop PC.

106_ English

USING THE Intelli-studio PROGRAMME
Using the Intelli-studio programme built-in your camcorder, you can transfer video/photo les onto your PC and edit them on your computer. Intelli-studio offers the most convenient way for you to manage video/photo les by using the simple the USB cable connection between the camcorder and your PC.

Step 3. Playing back videos (or photos)
You can play back recordings conveniently using the Intelli-studio application. 1. Run the Intelli-studio programme. page 107 2. Click the desired folder to display your recordings. Video (or photo) thumbnails appear on the screen, according to the selected source. 3. Select the video that you want to play, and then click the Player icon on the bottom side of the screen. Playback starts and playback controls appear. You can also double-click the video (or photo) thumbnail to start playback. The following is the le format supportable in Intelli-studio: - Video formats: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9) - Photo formats: JPG, GIF, BMP, PNG, TIFF
Step 4. Editing videos (or photos)
With Intelli-studio, you can edit the videos or photos in various ways. Select the video (or photo) that you want to edit, and then click the EDIT icon.

English _109

Step 5. Sharing video/photo images online
Share your contents with the world, by uploading photos and videos directly to a web site with on click. 1. Click the SHARE on the browser. 2. Click the Add and move the video or photo (drag and drop) to the sharing window for upload. The selected le appears on the sharing window. 3. Click the website you would like to upload les to. You can choose the YouTube, Flickr, or the specied website you want to set for your uploading management. 4. Click the Upload to Share Site to start uploading. A pop up window appears asking your ID and the password. 5. Enter your web log-in information to access. Access to the web site contents can be limited depending on your web access environment. For more information about Intelli-studio use, see the Help Guide by clicking Menu Help.

110_ English

Installing Intelli-studio application on the Windows computer
When the Intelli-studio application is installed on a Windows computer, it will run faster after connecting the camcorder to your computer. Moreover, the application can be updated automatically and run directly in the Windows computer. The Intelli-studio application can be installed on a Windows computer as follows: Click the Menu Install Intelli-studio on PC on the Intelli-studio screen.

English _111

USING AS A REMOVABLE STORAGE DEVICE
You can transfer or copy recorded data to a Windows computer by connecting the USB cable to the camcorder.
Step 1. Viewing the contents of storage media
1. Set the USB Connect to Mass Storage. page 89 2. Set PC Software to Off. page 88 3. Check out the storage media. (If you want to record on a memory card, insert the memory card.) (HMX-H104BP/HMX-H105BP/HMX-H1052BP/HMX-H106SP/HMX-H1062SP only) page 27 4. Connect the HD camcorder to the PC with the USB cable. page 107 The Removable Disk or Samsung window appears on the PCs screen after a moment. The removable disk appears when connecting a USB. Select Open folders to view les using Windows Explorer and click OK. 5. The folders in the storage media appear. Different le types are stored in different folders. If the Removable Disk window does not appear, conrm the connection (page 107) or perform steps 1 and 2 again. When the removable disk does not appear automatically, open the removable disk folder of My Computer. If the connected camcorders disk drive does not open or the context menu that appears when right clicking your Mouse (open or browse) appears broken, your computer is suspected to be infected by Autorun virus. Install the vaccine or update to the latest version.

Playback on other devices (TV, etc) Symptom Explanation/Solution
You cannot view the image or hear the sound from the connected device. Connect the audio of the Component/AV to your camcorder or connected device (TV, HD recorder, etc). (Red colour- right, White colour- left) The connection cable (HDMI, Component/AV cable, etc) is not connected properly. Make sure that the connection cable is connected to the proper jack. pages 48-50 This HD camcorder provides the two-in-one component/AV cable that ts the purpose of the component and the AV cable. Therefore, when using the component/AV cable, you must check the right method for the TV output by setting the Analogue TV Out menu. page 89 This phenomenon is caused by connecting to the TV with 4:3 aspect ratio. Images will not be output from the HDMI jack if the material is copyright protected.
The image appears distorted on a TV. You cannot view the image or hear the sound from a TV connected using the HDMI cable.

English _127

Connecting/Dubbing with other devices (Recorder, PC, Printer, etc)
Symptom You cannot dub correctly using the HDMI cable. Explanation/Solution You cannot dub images using the HDMI cable. The Component/AV (Video, Audio L/R) cable is not connected properly. Make sure that the Component/AV (Video, Audio L/R) cable is connected to the proper jack, i.e. to the input jack of the device used for dubbing images from your camcorder. page 52 This HD camcorder provides the two-in-one component/AV cable that ts the purpose of the component and the AV cable. Therefore, when using the component/AV cable, you must check the right method for the TV output by setting the Analogue TV Out menu. page 89 Your printer may not print images edited on a computer or recorded using other device. This is not an error.
You cannot dub correctly using the Component/AV (Video, Audio L/R) cable.
Printouts cannot be made using a PictBridge printer.

Connecting to a computer

Symptom The computer does not recognise your HD camcorder. Explanation/Solution Cannot play a movie le properly on a Windows computer. Disconnect the USB cable from the computer and camcorder, restart the computer, then connect it again correctly. A video codec is needed to play the le recorded on your HD camcorder. Install or run the built-in edit software (Intelli-studio). pages 109-111 Make sure you insert the connector in the correct direction, and connect the USB cable to the USB jack on your camcorder rmly. Disconnect the cable from the computer and camcorder, restart the computer. Connect it again properly. To play back an HD video le, a computer with better specication is required. Check a computer with recommended specication. page 106 Exit the Intelli-studio application, and restart the Windows computer. The built-in software on your camcorder, Intelli-studio is not Macintosh compliant. Set PC Software to On in the Settings menu. page 88 According to your computer type, the Intelli-studio program may not automatically run. In this case, open the desired CD-ROM drive that has the Intelli-studio programme in My Computer and run iStudio.exe.

Intelli-studio does not function properly.

128_ English

Symptom Explanation/Solution The image or sound on your camcorder is not played on your computer properly. Movie playback or sound may stop temporarily depending on your computer. The movie or sound copied to your computer is not affected. If your camcorder is connected to a computer that does not support Hi-speed USB (USB2.0), the image or sound may not be played correctly. The image and sound copied to your computer are not affected. Check the system requirements to play a movie. page 106 Exit other all applications running on the current computer. If a recorded movie is played on your camcorder connected to a computer, the image may not play smoothly, depending on the transfer speed. Please copy the le to your PC, and then play it back.
The playback screen is paused or distorted.

Overall operations

Symptom The date and time are incorrect. The camcorder does not turn on, or does not operate by pressing any button. Lens cover is not closed even when the power is off. Explanation/Solution Has the camcorder been left unused for a long period of time? The backup built-in rechargeable battery may be discharged. page 26 Remove the battery pack or unplug AC power adaptor, and connect the power supply to the camcorder again before turning it on. Lens cover is not closed if the power is not turned off by using the Power ( ) button. Turn the power off by using the Power ( ) button for about 1 second.

English _129

Symptom Explanation/Solution You cannot select grayed items in the current recording/playback mode. Menu, quick menu, and Flash ( ) button cannot be used in EASY Q mode. The following functions cannot be used during video recording: Video Resolution, Video Quality, Photo Resolution, Photo Sharpness, Fader, Cont. Shot, Digital Zoom, Self Timer, Time Lapse REC, Storage Type (Q.MENU). There are some functions you cannot activate simultaneously. The following list shows examples of unworkable combinations of functions and menu items. Cannot use iSCENE Manual Aperture Manual Shutter Fader, Video Resolution, Video Quality, Because of the following settings Aperture : Manual, Shutter : Manual Shutter : Manual, iSCENE Aperture : Manual, iSCENE Time Lapse REC
Menu items are grayed out.

130_ English

specifications
Model names: HMX-H100P/HMX-H1000P/HMX-H104BP/HMX-H105BP/HMX-H1052BP/HMX-H106SP/HMX-H1062SP System
Video signal Picture compression format Audio compression format Image device Lens Focal length Filter diameter PAL H.264 (MPEG-4.AVC) AAC (Advanced Audio Coding) 1/4.1 CMOS (Complementary Metal-Oxide Semiconductor) (Max: 3.05M pixels / Effective: 2.89M pixels) F1.8 10x (Optical), 10x (Digital) Electronic zoom lens 3.3~33mm 37 2.7inch wide 230k TFT LCD 1Vp-p (75 terminated) Y: 1Vp-p, 75, PB/PR, Cb/Cr: 0.350Vp-p, 75 C type connector -7.5dBs (600 terminated) Mini-B type connector DC 8.4V, Lithium Ion battery pack 7.4V Lithium Ion battery pack, Power supply (100V~240V) 50/60Hz 3.5W (LCD on) 0~40C (32F~104F) -20C ~ 60C (-4F ~ 140F) 63 mm (2.48 inches) x 60.9mm (2.40 inches) x 128.6 mm (5.06 inches) 352g (0.78 lb, 12.42 oz) (Except for Lithium Ion battery pack) Omni-directional stereo microphone Indoors: greater than 15 m (49 ft) (straight line), Outdoors: about 5 m (16.4 ft) (straight line) SSD built-in memory, memory card (SD/SDHC)