Instruction Manual

DVD HOME THEATER SYSTEM

HT-X70 HT-TX72 HT-TX75
SAMSUNG ELECTRONICS CANADA, INC. HEADQUARTERS 55 Standish Court Mississauga, Ontario L5R 4B2 Canada TEL: 1-905-542-3535

www.samsung.ca

SERVICE DIVISION 55 Standish Court Mississauga, Ontario L5R 4B2 Canada 1-800-SAMSUNG (1-800-726-7864)

AH68-01951D REV: 00

COMPACT

DIGITAL AUDIO

Safety Warnings

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN

Precautions

This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury.

PREPARATION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER (or BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates important instructions accompanying the product.
CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION : INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on modules or other equipment which may become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the Home Theater to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.
Note to CATV system installer
This reminder is provided to call the CATV system installers attention to Section 820~40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
During thunderstorms, disconnect the AC main plug from the wall outlet. Voltage peaks due to lightning could damage the unit. The Mains plug is used as a disconnect device and shall stay readily operable at any time. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and malfunction of the unit.

WARNING

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Phones

Protect the player from moisture(i.e. vases) , and excess heat (e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers.). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use. Use of this product is for personal use only. Condensation may occur if your player or disc has been stored in cold temperatures. If transporting the player during the winter, wait approximately 2 hours until the unit has reached room temperature before using.
The batteries used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in the general household trash.

Features

Multi-Disc Playback & FM Tuner
The HT-X70/HT-TX72/HT-TX75 combines the convenience of multi-disc playback capability, including DVD-AUDIO, DVD-VIDEO, CD, MP3-CD, WMA-CD, DivX, CD-R/RW, and DVD-R/RW, with a sophisticated FM tuner, all in a single player.

Contents

Safety Warnings..2 Precautions...3 Features...4 Notes on Discs..6 Description...8
Settings..46 Setting the Language...46 Setting TV Screen Type..47 Setting Parental Controls (Rating Level)..48 Setting the Password...48 Setting the Wallpaper...49 To Select One of the 3 Wallpaper Settings you've made..49 DVD Playback Mode..50 DivX (R) Registration..50 Setting the Speaker Mode..50 Setting the Delay Time..51 Setting the Test Tone..52 Setting the Audio...53 Setting the DRC (Dynamic Range Compression).54 Setting the AV SYNC..54 Setting the HDMI Audio..55 Sound Field (DSP)/EQ Function..56 Dolby Pro Logic II Mode...57 Dolby Pro Logic II Effect...58

DVD-Audio compatible

Experience the super high-quality audio performance of DVD-Audio. The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound quality in terms of dynamic range, low-level resolution and high-frequency detail.

USB Host support

You can enjoy media files such as pictures, movies and music saved on an MP3 player, digital camera or USB memory stick by connecting the storage device to the USB port of the Home Theater.

CONNECTIONS

Connecting the Speakers..12 Speaker Installation...15 Connecting the optional Wireless Receiving Amplifier..16 Connecting the Video Out to your TV..19 Connecting the HDMI IN/OUT..20 HDMI Function...21 Connecting Audio from External Components.23 Connecting the FM Antenna..25 Connecting an optional XM Satellite Radio Antenna...26

Dolby Pro Logic II

Dolby Pro Logic II is a form of multi-channel audio signal decoding technology that improves upon existing Dolby Pro Logic.
DTS (Digital Theater Systems)
DTS is an audio compression format developed by Digital Theater Systems Inc. It delivers full-frequency 5.1 channel sound.

TV Screen Saver Function

If the main unit remains in Stop mode for 3 minutes, the Samsung logo appears on the TV screen. The HT-X70/HT-TX72/HT-TX75 will automatically switch to the Power Saving mode after 20 minutes in the Screen Saver mode.

OPERATION

Before Reading the User's Manual..27 Before Using Your Home Theater.28 Disc Playback..29 MP3/WMA-CD Playback..30 JPEG File Playback...31 DivX Playback...32 Using the Playback Function..34 Displaying Disc Information..34 Checking the Remaining Time..35 Fast Playback...35 Slow Playback...35 Skipping Scenes/Songs..36 Repeat Playback..37 To Select a Repeat Playback Mode in the Disc Information Screen...37 A-B Repeat Playback..38 Step Function..38 Angle Function...39 Zoom (Screen Enlarge) Function..39 EZ VIEW Function..40 Bonus Group...40 Navigating Pages..40 Audio Language Selection Function..41 Subtitle Language Selection Function..41 Moving Directly to a Scene/Song..42 Using the Disc Menu..43 Using the Title Menu..43 Playing Media Files using the USB Host feature.44

Power Saving Function

The HT-X70/HT-TX72/HT-TX75 will automatically shut off after 20 minutes in Stop mode.

Operation Range of the Remote Control
The remote control can be used up to approximately 23 feet (7 meters) in a straight line. It can also be operated at a horizontal angle of up to 30 from the remote control sensor.

Connecting the Speakers

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

HT-X70

C L SW R

Rear Speaker (R)

Center Speaker

Rear Speaker (L)

Front Speaker (R)

Front Speaker (L)

Position of the Home Theater Place it on a stand, cabinet shelf, or under the TV stand. Front Speakers L R Place these speakers in front of your listening position,
facing inwards (about 45) toward you. Place the speakers so that their tweeters will be at the same height as your ear. Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speakers.
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example : For 32" TVs 2~2.4m (6~8 feet) For 55" TVs 3.5~4m (11~13 feet)

Subwoofer

Rear Speakers SL SR Place these speakers behind your listening position. If there isn't enough room, place these speakers so they
face each other. Place them about 60 to 90cm (2 to 3feet) above your ear, facing slightly downward. Unlike the center speakers, the rear speakers * are used tofront andmainly sound effects and sound will handle
Press and hold the terminal tab. Insert the black wire into the black terminal () and the red wire into the red (+) terminal. Release your finger.
Center Speaker C It is best to install it at the same height as the front
speakers. You can also install it directly over or under the TV.
not come from them all the time.
Sound will be heard from the rear speakers in DVD 5.1-CH or Dolby Pro Logic II mode only.
Subwoofer SW The position of the subwoofer is not so critical.
Place it anywhere you like.
Do not let children play with or near the speakers. They could get hurt if a speaker falls. When connecting the speaker wires to the speakers, make sure that the polarity (+/) is correct. Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker. Do not hang the subwoofer on the wall through the duct (hole). If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated by the speaker. If this occurs, place the speaker away from your TV set.
Connecting the Speakers (Cont)

HT-TX72

Speaker Installation
With the HT-TX72 front speakers and HT-TX75 front/rear speakers, you have the option of installing the speakers on Stands, or directly to the Stand Base.

Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control, Anynet + can be used by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+.
Connecting Audio from External Components
AUX1 : Front Panel AUX2 : Rear Panel
Connect the main unit of the Home Theater to a Samsung TV with an HDMI cable. (See page 19) Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
You can operate the Home Theater by using the TV remote control. (Available TV buttons : , , , , , and , buttons, ~ button)
If you select TV Set the Anynet+(HDMI-CEC) function to <On> on your TV.
MOVE MOVE ENTER ENTER EXIT EXIT
Audio Cable Audio Cable (not supplied) (not supplied) Audio Cable (not supplied)

Audio Cable

(not supplied) If the external analog component has only one Audio Out, connect either left or right.
<Receiver : On> : You can listen to audio through the Home Theater. <Receiver : Off> : You can listen to audio through the TV.
If you select the THEATER Select <THEATER to connector> and set the option of each items below.
<View TV> : If Anynet+(HDMI-CEC) set to on and you select View TV, the Home Theater will automatically switch to DIGITAL IN. <THEATER Menu> : You can access the Home Theater menu. <THEATER Operation> : The Home Theater disc playback information will be displayed. <Receiver : On> : You can listen to audio through the Home Theater. <Receiver : Off> : You can listen to audio through the TV.

MOVE ENTER EXIT

AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player
Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3 player. Press the AUX button on the remote control to select <AUX1> input.
When selecting View TV, you must have a digital optical cable connected from the TV to the Home Theater to listen to the TV sound through the Home Theater. If Anynet+ (HDMI-CEC) is on and you turn off the main unit, your TV will also turn off. Anynet+ (HDMI-CEC) will only work while in the DVDmode.
You can also use the FUNCTION button on the main unit. The mode switches as follows : DVD/CD DIGITAL IN AUX 1 AUX 2 HDMI IN USB FM XM.

With Anynet+

You can operate this unit, power on your TV, or watch a movie by pressing the Play button on your Samsung TV's remote control.
AUX2 : Connecting an External Analog Component

Depending on the content of the disc, the initial screen may appear different. Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system) recommendations.
Selecting a Disc in the Disc changer
To select a specific disc, press the corresponding the DIRECT PLAY (1, 2, 3, 4, 5) buttons on the front panel or the DISC SKIP button on the remote control, until the required disc indicator flashes.
If the disc selected is not loaded, the next disc is played automatically.

MP3/WMA-CD Playback

Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played.

JPEG File Playback

Slide Mode 1 2
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this Home Theater.
Place the MP3/WMA disc on the disc tray.
The MP3/WMA menu screen will appear and playback will start. The appearance of the menu depends on the MP3/WMA disc. WMA-DRM files cannot be played.
Place the JPEG disc on the disc tray.
In Stop mode, use the Cursor then press the ENTER button.
button to select the album, and
Playback starts automatically. Each image is displayed for 5 seconds and then the next image is displayed.
Press the SLIDE MODE button.
Each time the button is pressed, the image makes the transition as follows : SLIDE SHOW MODE : 1~5 SLIDE SHOW MODE : RANDOM SLIDE SHOW MODE : NONE

Use the Cursor

button to select the track.
To change the album, use the Cursor , , , button to select another album in Stop mode, and then press the ENTER button.

Press the

button to skip to the next slide.
To select another album and track, repeat Steps 2 and 3 above.
Each time the button is pressed, the slide moves backward or forward.
Press the STOP ( ) button to stop playback.
Depending on the recording mode, some MP3/WMA-CDs may not play. Table of contents of a MP3-CD varies depending on the MP3/WMA track format recorded on the disc.

Digest Function

You can view 9 JPEG images on the TV screen at once.
Press the DIGEST button during playback.
JPEG files will be shown in 9 windows.
Press the Cursor , , , button to select the desired image and then press the ENTER button.
The selected image is played for 5 seconds before moving to the next image.
To view the previous or next 9 images, press the

button.

To play a file icon in the screen,

Rotate/Flip Function

Press the Cursor , , , button during playback.

Press the Cursor

button when it is in Stop mode and select a desired icon from the top part of the menu. Music File Icon : To play music files only, select the Image File Icon : To view image files only, select the Movie File Icon : To view movie files only, select the All File Icon : To view movie files only, select the Icon. Icon. Icon. Icon.

button: Flip Vertically

button: Rotate 90 Counterclockwise Original Image
button: Rotate 90 Clockwise
button: Flip Horizontally
The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files. If a JPEG file is played when the HDMI output resolution is 720p/1080i, the mode is automatically converted to 480p mode.

DivX Playback

The functions on this page apply to DivX disc playback.

Skip Forward/Back

During playback, press the

Subtitle Display

, button.
button, if there are over 2 files in the disc. button, if there are over 2 files in the disc.
Press the SUBTITLE button.
Goes to the next file whenever you press the Goes to the previous file whenever you press the
Each time you press the button, your selection will toggle between <SUBTITLE (1/N, 2/N.)> and <SUBTITLE OFF>. If the disc has only one subtitle file, it will be played automatically. See number 2 (Caption Function) below for more details concerning Subtitle usage with DivX discs.

Fast playback

To play back the disc at a faster speed, press the playback.

button during

If the Disc has more than One Subtitle File
If the disc has more than one subtitle file, the default subtitle may not match the movie and you will have to select your subtitle language as follows:
Each time you press either button, the playback speed will change as follows: 2x 4x 8x 32x Normal.

Minute Skip function 2

In Stop mode, press the Cursor , button, select the desired subtitle ( from the TV screen, and then press the ENTER button. When you select the desired DivX file from the TV screen, the movie will be played normally.

button. button.

Playback skips 5 minutes forward whenever you press the Cursor Playback skips 5 minutes back whenever you press the Cursor
DivX(Digital internet video eXpress)
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and video data over the Internet in real-time. MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quality video and audio.

To stop playback, press the STOP ( ) button. Safe USB Removal
To prevent damage to the memory stored in the USB device, perform safe removal before disconnecting the USB cable.

44.1kHz 44.1kHz

Movie CBI
720x480 44.1KHz~48KHz 800x600 44.1KHz~48KHz
(1) Press the STOP ( ) button twice in a row. The display will show REMOVE USB. (2) Remove the USB cable.
To listen to your music files with 5.1 channel home theater sound, you must set the Dolby Pro Logic II mode to Matrix. (See page 57)
(Control/Bulk/Interrupt) is not supported.

Digital

button, the next file is selected. button, the previous file is selected.
When there is more than one file and you press the When there is more than one file and you press the
Cameras that use PTP protocol or require additional program installation when connected to a PC are not supported. A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file system is supported.) Some MP3 players, when connected to this product, may not operate depending on the sector size of their file system. The USB host function is not supported if a product that transfers media files by its manufacturerspecific program is connected. Does not operate with Janus enabled MTP(Media Transfer Protocol) devices.
USB host function of this product does not support all USB devices. For information on the supported devices, see page 72.
To play back the disc at a faster speed, press the

button during playback.

Each time you press the either button, the playback speed will change as follows: 2x 4x 8x 32x Normal.

Settings

Setting the Language
OSD (On-Screen Display) language is set to English by default.

Setting TV Screen Type

Depending on your TV type (Wide Screen or conventional 4:3), you can select the TV's aspect ratio.

RETURN

In Stop mode, press the MENU button. Press the Cursor button to move to <Setup> and then press the ENTER button.
Select <LANGUAGE> and then press the ENTER button. Press the Cursor , the ENTER button. Press the Cursor , the ENTER button. button to select <OSD LANGUAGE> and then press button to select the desired language and then press

MOVE ENTER RETURN EXIT

Press the Cursor button to move to <TV DISPLAY> and then press the ENTER button. Press the Cursor , the ENTER button. button to select the desired item and then press
Once the setup is complete, you will be taken to the previous screen.
Once the setup is complete, the OSD will be English if English has been selected as language.
Press the RETURN button to return to the previous level. Press the EXIT button to exit the setup screen.

SELECT

Adjusting the TV Aspect Ratio (Screen Size)
OSD LANGUAGE : Selecting the OSD Language AUDIO : Selecting the Audio Language (recorded on the disc) SUBTITLE : Selecting the Subtitle Language (recorded on the disc) DISC MENU : Selecting the Disc Menu Language (recorded on the disc) If the language you selected is not recorded on the disc, the menu language will not change even if you set it to your desired language.

The selected wallpaper will be displayed. You can select up to 3 wallpaper settings. This function will not work when the HDMI output is 720p or 1080i.
If you have selected Level 6, you cannot view DVDs with Level 7 or higher. The higher the level, the closer the content is to violent or adult material.

MOVE SELECT RETURN EXIT

Enter the password and then press the ENTER button.
The password is set to "7890" by default. Once the setup is complete, you will be taken to the previous screen.
This function works only if a DVD disc contains the rating level information.
To Select One of the 3 Wallpaper Settings you've made 3
In Stop mode, press the MENU button. Press the Cursor Press the Cursor button. button to move to <Setup> and then press the ENTER button. button to move to <LOGO> and then press the ENTER button to select the desired <USER>, and then press

Setting the Password

You can set the password for the Parental (rating level) setting.
This selects one of the 3 wallpaper screens
Press the Cursor button to move to <PASSWORD> and then press the ENTER button. Press the ENTER button. Enter the password and then press the ENTER button.
Enter the old password, a new password, and confirm new password. The setting is complete.
ORIGINAL : Select this to set the Samsung Logo image as your wallpaper. USER : Select this to set the desired image as your wallpaper.
The password is set to "7890" by default.
If you have forgotten the rating level password, do the following
While the player is in No DIsc mode, hold the DVD Player's STOP ( the display and all settings will return to the default values. Press the POWER button. Using the RESET function will erase all stored settings. Do not use this unless necessary. ) button for longer than 5 seconds. <INITIAL> appears on

DVD Playback Mode

Some DVD-Audio discs contain DVD-Video as well as DVD-Audio. To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.

Setting the Delay Time

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers.

Press the MENU button while the disc tray is open. Press the Cursor Press the Cursor button to move to <Setup> and then press the ENTER button. button to move to <DVD TYPE> and then press the ENTER button. button to move to <DVD VIDEO> and then press
In Stop mode, press the MENU button. Press the Cursor button to move to <Audio> and then press the ENTER button.
Press the Cursor button to move to <DELAY TIME> and then press the ENTER button. Press the Cursor , , press the ENTER button. Press the Cursor , , button to move to the desired speaker and then
Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.
button to set the Delay time.
DVD VIDEO : set to play the DVD video contents contained on a DVD audio disc. DVD AUDIO : set to play the default DVD audio.
You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and 15mSEC.
DVD Play mode is set to DVD Audio as factory default setting. Powering off the main unit will automatically switch to the DVD Audio mode.

CHANGE

DivX (R) Registration
Please use the Registration code to register this player with the DivX (R) video on demand format. To learn more, go to www.divx.com/vod.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center and Surround Speakers.
Ideal CENTER SPEAKER placement

Setting the Speaker Mode

Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not.
Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.
Distance between Df and Dc 0 inch 13.6 inches 27.2 inches 40.8 inches 4.5 feet 5.6 feet Delay Time
0 ms 1 ms 2 ms 3 ms 4 ms 5 ms
Ideal SURROUND SPEAKER placement It is desirable to place all speakers within this circle. Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Ds: The distance from SURROUND SPEAKER
In the <SPEAKER SETUP>, press the the ENTER button again. Press the Cursor , , press the ENTER button. , button to move to the desired speaker and then
Setting REAR (SURROUND) SPEAKERS If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

Adjusting Center/Rear/Subwoofer Speaker Level
The volume level can be adjusted in steps from +6dB to 6dB. The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
Setting the DRC (Dynamic Range Compression)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

Setting the HDMI Audio

The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
In Stop mode, press the MENU button. Press the Cursor Press the Cursor button. Press the Cursor

When the Cursor

button to move to <Audio> and then press the ENTER button. button to move to <DRC> and then press the ENTER
Press the Cursor button to move to <HDMI AUDIO> and then press the ENTER button. Press the Cursor , the ENTER button. button to select <ON> or <OFF> and then press
button to adjust the DRC.

button is

button is pressed, the effect is greater, and when the Cursor
pressed, the effect is smaller.
ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio
is output through your TV speakers only.
OFF : Video is transmitted over the HDMI connection cable only, and audio is output through
the home theater speakers only.

Setting the AV SYNC

Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match the video.
The default setting of this function is HDMI AUDIO OFF. HDMI AUDIO is automatically down-mixed to 2ch for TV speakers. The HDMI AUDIO is not available when using the HDMI IN function.
In Stop mode, press the MENU button. Press the Cursor Press the Cursor button. button to move to <Audio> and then press the ENTER button. button to move to <AV-SYNC> and then press the ENTER
Press the Cursor , button to select the AV-SYNC Delay Time and then press the ENTER button.
You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.

Display GOOD MARGINAL WEAK NO
Condition Signal strength is good Signal strength is marginal Signal strength is poor Loss of signal

Checking the Radio ID

Press the Cursor , button (or button on the main unit) to select channel <o>.
The Radio ID is displayed. The ID below is just an example.
To sign up for an account with the XM Satellite Radio service, an XM Satellite Radio ID number is required. Follow the procedure above to check your ID number, and then access the website at http://activate.xmradio.com or call 1-800-XM-RADIO(1-800-967-2346) with a major credit card to sign up.
Presetting XM Satellite Radio 1 2
Press the FM/XM button(or FUNCTION button on the main unit) and select the XM band.
Each time the FM/XM button is pressed, the band switches between <FM> <XM>.

Convenient Functions

Sleep Timer Function
You can set the time that the Home Theater will shut itself off.

Press the SLEEP button.

<SLEEP> will be displayed. Each time the button is pressed, the preset time changes as follows : 150 OFF.
Search the XM Satellite Radio channel you want to set as a preset channel.
When the channel number <20> is selected.
To confirm the sleep timer setting, press the SLEEP button.
The remaining time before the Home Theater will shut itself off is displayed. Pressing the button again changes the sleep time from what you have set earlier.
To cancel the sleep timer, press the SLEEP button until <OFF> appears on the display.
button select preset number.
Adjusting Display Brightness
You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.
Press the FM/XM MEMORY button before <PRGM> disappears form the display. <PRGM> disappears from the display and the station is stored in memory.

Press the DIMMER button.

Each time the button is pressed, the brightness of front display will be adjusted.
To preset another station, repeat steps 2 to 5.
Up to 15 stations can be saved in memory. If you save more than 15 stations, the oldest station previously saved is removed and a new station is stored in its place.

1051 1052

Language
Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali; Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faeroese French

1327 1332

Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua Interlingue Inupiak Indonesian Icelandic Italian Hebrew Japanese Yiddish Javanese Georgian Kazakh Greenlandic Cambodian Kannada Korean Kashmiri Kurdish Kirghiz Latin Lingala Laothian Lithuanian

1503 1505

Latvian, Lettish Malagasy Maori Macedonian Malayalam Mongolian Moldavian Marathi Malay Maltese Burmese Nauru Nepali Dutch Norwegian Occitan (Afan) Oromo Oriya Punjabi Polish Pashto, Pushto Portuguese Quechua Rhaeto-Romance Kirundi Romanian Russian Kinyarwanda Sanskrit Sindhi Sangro Serbo-Croatian Singhalese Slovak

1684 1697

Slovenian Samoan Shona Somali Albanian Serbian Siswati Sesotho Sundanese Swedish Swahili Tamil Tegulu Tajik Thai Tigrinya Turkmen Tagalog Setswana Tonga Turkish Tsonga Tatar Twi Ukrainian Urdu Uzbek Vietnamese Volapuk Wolof Xhosa Yoruba Chinese Zulu

Disc Storage

Do not keep in direct sunlight Keep in a cool ventilated area Keep in a clean Protection jacket. Store vertically.

1097 1103

Do not allow the discs to become contaminated with dirt. Do not load cracked or scratched discs.

1130 1142

Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth. When cleaning, wipe gently from the inside to the outside of the disc.

1171 1174

Condensation may form if warm air comes into contact with cold parts inside the player. When condensation forms inside the player, the player may not operate correctly. If this occurs, remove the disc and let the player stand for 1 or 2 hours with the power on.
USB Host Feature Supported Products

Digital Camera

Product
Finepix-A340 Finepix-F810 Finepix-F610 Finepix-f450 Finepix S7000 Finepix A310 KD-310Z Finecam SL300R Finecam SL400R Finecam S5R Finecam Xt Dimage-Z1 Dimage Z1 Dimage X21 Coolpix4200 Coolpix4300 Coolpix 2200 Coolpix 3500 Coolpix 3700 Coolpix 4100 Coolpix 5200 Stylus 410 digital 300-digital U300 X-350 C-760 C-5060 X1 U-mini Lumix-FZ20 DMC-FX7GD Lumix LC33 LUMIX DMC-F1 Optio-S40 Optio-S50 Optio 33LF Optio MX Digimax-420 Digimax-400 Sora PDR-T30 Coolpix 5900 Coolpix S1 Coolpix 7600 DMC-FX7 Dimage Xt AZ-1