HT-TZ315T home theatre system - home theatre SAMSUNG

Page 1 of 3

HT-TZ315T - home theatre

1000W, 5.1 channels HTS

HT-TZ315T comes with 5.1 channel surround sound and 1000W high power output that provides you a holistic entertainment experiences.
Full HD 1080p video up-scale
HT-TZ315T converts the resolution of ordinary DVDs to 1080p/1080i/720p High-definition which means youll experience the video and audio quality you didnt think was possible before!

USB Host playback

The USB Host play function, an exclusive SAMSUNG feature, enables various multimedia files to be played without a PC, including DivX, MP3, WMA, and JPEGs. Also add portable digital devices without software for instant entertainment.
pure digital for perfect vision
HDMI (High Definition Multimedia Interface) transfers video data from the home theatre to your TV at the highest quality. The 100% digital-to-digital connection supports hi-definition video for the ultimate home entertainment experience.
http://www.samsung.com/sg/consumer/detail/productPreviewRead.do?model_cd=HT-TZ3. 27/6/2008

Page 2 of 3

Bluetooth built-in for smart connection
Easy and convenient access with wireless Bluetooth technology.
Anynet+: one touch simplicity
SAMSUNG's Anynet+ (HDMI-CEC) technology gives you the ability to control all of your HDMI-CEC-compatible AV products with a single remote. And one line of HDMI cable makes installation and the quality superb.

high output power: 1000W

4 satellite speakers with high total output power 1000W.

wireless ready (5.8GHz)

Wireless ready for SWA4000 wireless speaker (optional). 5.8GHz to prevent interferences from various 2.4GHz devices such as WiFi, Cordless Phone and Microwave oven. Higher frequency to deliver better sound quality.

General

Total Power Number of Channel 1000 5.1

Video Feature

Up-Scale Yes

Audio Processing

sDSM or DNSe DTS Yes Yes

Connectivity

Anynet+ Yes

Page 3 of 3

Wireless-Ready

Speaker

Type (Sat/Tallboy) Tallboy

Dimensions & Weight

Set Net Dimension (W X H X D) 430 x 65 x 352mm
Copyright 2007 SAMSUNG. All rights reserved.

68 Language Code list

USB host feature supported products
69 Digital Camera 69 USB Flash Disc 69 MP3 Player

appendix

70 Cautions on Handling and Storing Discs 71 Specifications

HT-Z310-ENG-0226.indd 6

Before Reading the Users Manual
Make sure to check the following terms before reading the user manual.
Icons that will be used in manual
Icon Term DVD CD MP3 JPEG DivX Caution Definition This involves a function available with DVD or DVD-R/DVD-RW discs that have been recorded and finalized in Video Mode. getting This involves a function available with a data CD (CD-R or CD-RW). star This involves a function available with CD-R/-RW discs. This involves a function available with CD-R/-RW discs. This involves a function available with MPEG4 discs. (DVDR/RW, CD-R or CD-RW) This involves a case where a function does not operate or settings may be cancelled. This involves tips or instructions on the page that help each function operate.
In this manual, the instructions marked with "DVD ( DVD )" are applicable to DVDVIDEO, DVD-AUDIO and DVD-R/-RW discs that have been recorded in Video Mode and then finalized. Where a particular DVD type is mentioned, it is indicated separately. playable.
If ` a DVD-R/-RW disc has not been recorded properly in DVD Video format, it will not be
About the use of this users manual
1) Be sure to be familiar with Safety Instructions before using this product. (See page 4) 2) If a problem occurs, check the Troubleshooting. (See pages 66~67)

Copyright

2008 Samsung Electronics Co.,Ltd. All rights reserved; No part or whole of this users manual may be reproduced or copied without the prior written permission of Samsung Electronics Co.,Ltd.

HT-Z310-ENG-0226.indd 7

DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital surround sound and MPEG-2 video compression technology. Now you can enjoy these realistic effects in the home, as if you were in a movie cinema or concert hall.
DVD players and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this player is given on the rear panel of the player. (Your DVD player will only play DVDs that are labeled with identical region codes.)

2008-02-26 7:27:20
Installing the Wall Mount (Con't) <Front/rear>
3. Put the hole cover on the hole of the speaker.

CONNECTIONS

4. Use a coin turn the hole cover clock wise to fix it. (Turning it counter-clock wise will loosen from the hole.)
5. Use the wall mount hole (bracket) to install the speaker on the wall.
see if it includes the correct package of "Front/rear & Center Speakers" corresponding to your model. ` To avoid the speakers accident falling and consequently damaging yourself and the equipment, make sure the speaker is hung safely.

Front/rear Tallboy Stand

Model Item Name Quantity 2EA 2EA 2EA 4EA 4EA/6EA Model SPEAKER STAND HT-TZ212/TZ312 STAND BASE SCREW (Large) SCREW (Small) Item Name SPEAKER STAND STAND BASE SCREW (Large) SCREW (Small) Quantity 4EA 4EA 4EA 8EA 8EA/12EA

HT-TZ215/TZ315

HT-TZ212/TZ312 HT-TZ212/TZ312 HT-TZ212/TZ312 HT-TZ212/TZ312 HT-TZ215/TZ315

SCREW (Large)

HT-TZ215/TZ315 HT-TZ215/TZ315 HT-TZ215/TZ315 HT-TZ212 HT-TZ312

STAND BASE

SCREW (Small)

HT-Z310-ENG-0226.indd 19

2008-02-26 7:27:26
How to Install the Speaker on the Stand
1. Turn the STAND upside-down and connect it to the STAND BASE. Insert two small SCrEWS into the two holes marked with arrows using a screwdriver as shown in the illustration. (HT-TZ215 : 2EA, HT-TZ315 : 3EA). Insert a large SCrEW into the hole on the rear of the Speaker STAND. 4. Connect the assembled stand to the SPEAKEr.

STAND BASE STAND

. Insert another large SCrEW into the hole on the rear of the speaker using a screwdriver as shown in the illustration. This is the successfully assembled speaker. Make sure that the speaker is installed on a flat and stable area. Otherwise it may be easily knocked over.
How to Install the Speaker on the Stand Base
1. Connect the SPEAKEr with the STAND BASE. Insert the SCrEW into the hole on the rear of the speaker using a screwdriver as shown in the illustration. This is the SPEAKEr successfully assembled with the Stand Base.

HT-Z310-ENG-0226.indd 20

2008-02-26 7:27:30
Connecting the Front, rear, Center and Subwoofer Speakers
1. Press down the terminal tab on the back of the speaker. Insert the black wire into the black terminal () and the red wire into the red (+) terminal, and then release the tab. Connect the connecting plugs to the back of the Home Cinema. ~ Make sure the colors of the speaker terminals match the colors of the connecting plugs.

Black Red

In case of HT-Z310
Center Speaker Front Speaker (R) Front Speaker (L)

Rear Speaker (R)

Rear Speaker (L)

In case of HT-TZ312

HT-Z310-ENG-0226.indd 21

2008-02-26 7:27:32

Connecting the Front, Rear, Center and Subwoofer Speakers

` If a JPEG file is played when the HDMI output resolution is 720p/1080i/1080p, the mode is

HT-Z310-ENG-0226.indd 35

2008-02-26 7:27:56

DIVX PLAYBACK

The functions on this page apply to DivX disc playback.

Skip Forward/Back

During playback, press the #,$ button. Goes to the next le whenever you press the $ button, if there are 2 les or more on the disc. Goes to the previous le whenever you press the # button, if there are 2 les or more on the disc.

Fast Playback

To play back the disc at a faster speed, press the or button during playback. Each time you press either button, the playback speed will change as follows: 2x 4x 8x 32x Normal.

5 Minute Skip function

During playback, press the Cursor , button. Playback skips 5 minutes forward whenever you press the Cursor button. Playback skips 5 minutes back whenever you press the Cursor button.

Audio Display

Press the AUDIO button.
If there are multiple audio languages on a disc, you can toggle between them. Each time you press the button, your selection will toggle between AUDIO (1/N, 2/N.) and.
is displayed when there is one supported language in the disc.

Subtitle Display

Press the SUBTITLE button. Each time you press the button, your selection will toggle between SUBTITLE (1/N, 2/N.) and SUBTITLE OFF. If the disc has only one subtitle le, it will be played automatically. See number 2 (Caption Function) on the next page for more details concerning Subtitle usage with DivX discs.

HT-Z310-ENG-0227.indd 36

2008-02-27 3:35:26
If the Disc has more than One Subtitle File
If the disc has more than one subtitle file, the default subtitle may not match the movie and you will have to select your subtitle language as follows:
1. In Stop mode, press the Cursor , button, select the desired subtitle ( ) from the TV screen, and then press the ENTEr button. When you select the desired DivX file from the TV screen, the movie will be played normally.

DivX(Digital internet video eXpress)
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and video data over the Internet in real-time. MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quality video and audio. 1. Supported Formats This product only supports the following media formats.If both video and audio formats are not supported, you may experience problems such as broken images or no sound. Supported Video Formats Format Supported Versions Supported Audio Formats Format Bit Rate Sampling Frequency MP3 80~384kbps WMA 56~128kbps AC3 128~384kbps 44.1/48khz DTS 1.5Mbps 44.1khz AVI DivX3.11~DivX5.1, XviD WMV V1/V2/V3/V7

44.1khz

~ DivX files, including audio and video files, created in the DTS format can only support up to 6Mbps. ~ Aspect Ratio : Although the default DivX resolution is 640x480 pixels (4:3), this product supports up to 800x600 pixels (16:9). TV screen resolutions higher than 800 will not be supported. ~ When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on the screen during playback. Caption Function ~ You must have some experience with video extraction and editing in order to use this feature properly. ~ To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi) within the same folder. Example. Root Samsung_007CD1.avi Samsung_007CD1.smi ~ Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the file name.

HT-Z310-ENG-0226.indd 37

2008-02-26 7:27:59
USING THE PLAYBACK FUNCTION
Displaying Disc Information
You can view disc playback information on the TV screen. Press the INFO button.
Depending on the disc, the disc information display may appear different. DTS, DOLBY DIGITAL, or PRO LOGIC.
` Depending on the disc, you can also select
appears on the TV screen! If this symbol appears on the TV screen when pressing a button, that operation is not possible with the disc currently being played.
Checking the remaining Time
Press the rEMAIN button. ~ For checking the total and remaining time of a title or chapter being played.

When you play a DVD-Audio disc that has a bonus group, the key number input screen appears automatically.

KEY NUMBER :

If you eject the disc, switch the power off, or unplug the player, you will need to re-enter the key number.
Navigating Pages (HT-Z310/TZ312/TZ315 Only)
During playback, press the.,, button on the remote control. ~ You can select the desired image from a DVD-Audio disc containing still images. ~ With some discs, you may not be able to select images.

HT-Z310-ENG-0226.indd 43

2008-02-26 7:28:09
Audio Language Selection Function
1. Press the INFO button twice. Press the Cursor , button or numeric buttons to select the desired audio language. ~ Depending on the number of languages on a DVD disc, a different audio language (ENGLISH, SPANISH, FRENCH, etc.) is selected each time the button is pressed. EN 1/3 SP 2/3 Fr 3/3 EN 1/3
Subtitle Language Selection Function
1. Press the INFO button twice. Press the Cursor button to move to SUBTITLE ( display. )
. Press the Cursor button or numeric buttons to select the desired subtitle. EN 01/03 SP 02/03 Fr 03/03 OFF/03 EN 01/03
To operate this function, you can also press the AUDIO or SUBTITLE buttons on the remote control. ` Depending on the disc, the Subtitle and Audio Language functions may not be available.
Moving Directly to a Scene/Song
1. Press the INFO button. Press the Cursor , button or numeric buttons to select the desired title/track ( ) and then press the ENTEr button. Press the Cursor , button to move to the Chapter ( ) display. 4. Press the Cursor , button or numeric buttons to select the desired chapter and then press the ENTEr button. Press the Cursor , button to move to time ( display. )
. Press the numeric buttons to select the desired time and then press the ENTEr button.

HT-Z310-ENG-0226.indd 44

2008-02-26 7:28:10
Press the numeric buttons. ~ The selected file will be played. ~ When playing an MP3 or JPEG disc, you cannot use the Cursor , button to move to a folder. To move a folder, press the STOP (T) and then press the Cursor , button.
You can press the [,] button on the remote control to move directly to the desired title, chapter, or track. ` Depending on the disc, you may not be able to move to the selected title or time.

Using the Disc Menu

You can use the menus for the audio language, subtitle language, profile, etc. DVD menu contents differ from disc to disc. 1. In Stop mode, press the MENU button. Press the Cursor , button or numeric buttons to move to Disc Menu and then press the ENTEr button. ~ When you select Disc Menu and it is not supported by the disc, the "This menu is not supported" message appears on the screen. Press the Cursor ,,, button to select the desired item. 4. Press the ENTEr button. d Press the EXIT button to exit the setup screen.

WIDE/HDTV Select this to view a 16:9 picture in the full-screen mode on your widescreen TV. ~ You can enjoy the widescreen aspect.
` Since DVD discs are recorded in various image formats, they will look different depending ` When using HDMI, the screen is automatically converted to Wide mode.
on the software, the type of TV, and the TV aspect ratio setting.
If a DVD is in the 4:3 ratio, you cannot view it in widescreen.

HT-Z310-ENG-0226.indd 52

2008-02-26 7:28:18
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view. 1. In Stop mode, press the MENU button. Press the Cursor % button to move to Setup and then press the ENTER button. Press the Cursor % button to move to PARENTAL and then press the ENTER button. 4. Press the Cursor $,% button to select the desired rating level and then press the ENTER button. ~ If you have selected Level 6, you cannot view DVDs with Level 7 or higher. ~ The higher the level, the closer the content is to violent or adult material. 5. nter the password and then press the ENTER button. E ~ The password is set to "7890" by default. ~ Once the setup is complete, you will be taken to the previous screen. d Press the RETURN button to return to the previous level. d Press the EXIT button to exit the setup screen.

system setup

This function works only if a DVD disc contains the rating level information.

Setting the Password

You can set the password for the Parental (rating level) setting. 1. In Stop mode, press the MENU button. Press the Cursor % button to move to Setup and then press the ENTER button. Press the Cursor % button to move to PASSWORD and then press the ENTER button. 4. Press the ENTER button. Enter the password and then press the ENTER button. ~ Enter the old password, a new password, and confirm new password. ~ The setting is complete.
MOVE SELECT RETURN EXIT MOVE ENTER RETURN EXIT
The password is set to "7890" by default.
If you have forgotten the rating level password, do the following
~ While the player is in No DIsc mode, hold the DVD Players STOP (T) button for longer than 5 seconds. INITIAL appears on the display and all settings will return to the default values. ~ Press the POWER button. Using the RESET function will erase all stored settings. Do not use this unless necessary.

Setting the Speaker Mode

Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. 1. In Stop mode, press the MENU button. Press the Cursor % button to move to Audio and then press the ENTER button. In the SPEAKER SETUP, press the ENTER button again. 4. Press the Cursor ,,, button to move to the desired speaker and then press the ENTER button.
~ For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows : SMALL NONE. ~ For L and R, the mode is set to SMALL.
~ SMALL : elect this when using the speakers. S ~ NONE :Select this when no speaker is connected. d Press the RETURN button to return to the previous level. d Press the EXIT button to exit the setup screen.

MOVE CHANGE RETURN EXIT

Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 60).

HT-Z310-ENG-0226.indd 55

2008-02-26 7:28:20

Setting the Delay Time

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers. 1. 4. 5. In Stop mode, press the MENU button. Press the Cursor % button to move to Audio and then press the ENTER button. Press the Cursor % button to move to DELAY TIME and then press the ENTER button. Press the Cursor ,,, button to move to the desired speaker and then press the ENTER button. P ress the Cursor , to set the Delay time. ~ You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and 15mSEC.
d Press the RETURN button to return to the previous level. d Press the EXIT button to exit the setup screen.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center and Rear Speakers. Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.
Distance between Df and Dc Delay Time 0.00 m 0 ms 0.34 m 1 ms 0.68 m 2 ms 1.06 m 3 ms 1.40 m 4 ms 1.76 m 5 ms Ideal REAR SPEAKER placement It is desirable to place all speakers within this circle. Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Dr: The distance from REAR SPEAKER Ideal CENTER SPEAKER placement

Setting REAR SPEAKER If the distance of Dc is equal to or longer than the distance of Dr in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.
Distance between Df and Dc Delay Time 0.00 m 0 ms 1.06 m 3 ms 2.11 m 6 ms 3.16 m 9 ms 3.62 m 12 ms 5.29 m 15 ms
` With PL II (Dolby Pro Logic II), the delay time may be different for each mode. ` With AC-3 and DTS, the delay time can be set between 00 and 15mSEC. ` The Center channel is only adjustable on 5.1 channel discs.

HT-Z310-ENG-0226.indd 56

Using the Test Tone
Use the Test Tone feature to check the speaker connections. 1. In Stop mode, press the MENU button. Press the Cursor % button to move to Audio and then press the ENTER button. Press the Cursor % button to move to TEST TONE and then press the ENTER button. ~ The test tone will be sent to L C R SR SL SW in order. If the ENTER button is pressed again at this time, the test tone will stop. d Press the RETURN button to return to the previous level. d Press the EXIT button to exit the setup screen.

Setting the Audio

You can adjust the balance and level for each speaker. 1. In Stop mode, press the MENU button. Press the Cursor % button to move to Audio and then press the ENTER button. Press the Cursor % button to move to SOUND EDIT and then press the ENTER button. 4. Press the Cursor , button to select and adjust the desired item. Press the Cursor , button to adjust the settings.

HT-Z310-ENG-0226.indd 57

SETTING THE AUDIO
Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.
Press the SOUND EDIT button and then press the Cursor , button.
Adjusting Front/rear Speaker Balance ` You can select between 00, -06, and OFF. ` The volume decreases as you move closer to 6. Adjusting Center/rear/Subwoofer Speaker Level ` The volume level can be adjusted in steps from +6dB to 6dB. ` The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
SETTING THE DrC (DYNAMIC rANGE COMPrESSION)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. 1. In Stop mode, press the MENU button. Press the Cursor % button to move to Audio and then press the ENTEr button. Press the Cursor % button to move to DrC and then press the ENTEr button. 4. Press the Cursor , to adjust the DrC. ~ When the Cursor button is pressed, the effect is greater, and when the Cursor button is pressed, the effect is smaller. d Press the rETUrN button to return to the previous level. d Press the EXIT button to exit the setup screen.

CHANGE RETURN EXIT MOVE ENTER RETURN EXIT

HT-Z310-ENG-0226.indd 58

2008-02-26 7:28:22

Setting the AV SYNC

Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to match the video. 1. In Stop mode, press the MENU button. Press the Cursor % button to move to Audio and then press the ENTER button. Press the Cursor % button to move to AV-SYNC and then press the ENTER button. 4. Press the Cursor , button to select the AV-SYNC Delay Time and then press the ENTER button. ~ You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status. d Press the RETURN button to return to the previous level. d Press the EXIT button to exit the setup screen.

Setting the HDMI Audio

The audio signals transmitted over the HDMI Cable can be toggled ON/OFF. 1. In Stop mode, press the MENU button. Press the Cursor button to move to Audio and then press the ENTER button. Press the Cursor button to move to HDMI AUDIO and then press the ENTER button. 4. Press the Cursor , button to select ON or OFF and then press the ENTER button. ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only. OFF : Video is transmitted over the HDMI connection cable only, and audio is output through the home cinema speakers only. d Press the RETURN button to return to the previous level. d Press the EXIT button to exit the setup screen.
The default setting of this function is HDMI AUDIO OFF.
` HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.

HT-Z310-ENG-0226.indd 59

2008-02-26 7:28:26
SOUND FIELD (DSP)/EQ FUNCTION
DSP(Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments. EQ : You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing Press the DSP/EQ button. ~ DSP appears on the display panel. Each time the button is pressed, the selection changes as follows: POPS JAZZ rOCK STUDIO CLUB HALL MOVIE CHUrCH PASS ~ POPS, JAZZ, rOCK : Depending on the genre of music, you can select POP, JAZZ, and ROCK. ~ STUDIO : Provides a sense of presence as if in a studio. ~ CLUB : Simulates the sound of a dance club with a throbbing bass beat. ~ HALL : Provides a clear vocal as if listening in a concert hall. ~ MOVIE : Provides the feeling of a movie cinema. ~ CHUrCH : Gives the feel of being in a grand church. ~ PASS : Select this for normal listening.

The DSP/EQ function is only available in STEREO mode. Press the PL II mode button to show STEREO on the display. ` This feature works with CDs, MP3-CDs, 2 channel DVD-Audio, DivX, tuner and Dolby Digital discs. ` When playing a DVD disc encoded with two or more channels, multi-channel mode will be selected automatically and DSP/EQ function does not work.

DOLBY PrO LOGIC II MODE

You can select the desired Dolby Pro Logic II audio mode. Press the PL II MODE button. ~ Each time the button is pressed, the mode changes as follows. MUSIC CINEMA PrO LOGIC MATrIX STErEO MUSIC

PrO LOGIC II

~ MUSIC : When listening to music, you can experience sound effects as if you are listening to the actual performance. ~ CINEMA : Adds realism to the movie soundtrack. ~ PrO LOGIC : You will experience a realistic multi-channel effect, as if using five speakers, while using just the front left and right speakers. ~ MATrIX : You will hear 5.1 channel surround sound. ~ STErEO : Select this to listen to sound from the front left and right speakers and the subwoofer only.
When selecting Pro Logic II mode, connect your external device to the AUDIO INPUT jacks (L and R) on the player. If you connect to only one of the inputs (L or R), you cannot listen to surround sound.

HT-Z310-ENG-0226.indd 60

2008-02-26 7:28:27
DOLBY PrO LOGIC II EFFECT
This function works only in Dolby Pro Logic MUSIC mode. 1. Press the. Press the PL II MODE button to select MUSIC mode. PL II EFFECT button.
. Press the , buttons to select the desired effect setting. ~ PANORAMA : You can select either 0 or 1. ~ C- WIDTH : You can select between 0 and 7. ~ DIMENS : You can select between 0 and 6.

SYSTEM SETUP

P.BASS function boosts the bass for a more powerful sound. 1. Press the P.BASS button to select P.BASS mode. Press the P.BASS button again to turn off the P.BASS mode.
The P.BASS function is only available with 2 channel LPCM sources such as mp3,Divx,cd and wma. Press P.BASS button and "POWER BASS ON" will be displayed on the screen. ` The P.bass does not work with DSP/EQ or DOLBY PRO LOGIC ll modes. If you press P.BASS in the DSP/EQ mode, the DSP/EQ mode is automatically shut off and the P. BASS function comes on.

HT-Z310-ENG-0226.indd 61

2008-02-26 7:28:28

LISTENING TO rADIO

remote Control
1. Press the TUNEr button to select the FM band. Tune in to the desired station. ~ Automatic Tuning 1 : When the [,] button is pressed, a preset broadcast station is selected. ~ Automatic Tuning 2 : Press and hold the ,,. button to automatically search for active broadcasting stations. ~ Manual Tuning : Briefly press the ,,. button to increase or decrease the frequency incrementally.

Main Unit

1. Press the FUNCTION button to select the FM band. Select a broadcast station. ~ Automatic Tuning 1 : Press the STOP (T) button to select PrESET and then press the [,] button to select the preset station. ~ Automatic Tuning 2 : Press the STOP (T) button to select MANUAL and then press and hold the [,] button to automatically search the band. ~ Manual Tuning : Press the STOP (T) button to select MANUAL and then briefly press the button to tune in to a lower or higher frequency. Press the MO/ST button to listen in Mono/Stereo. Each time the button is pressed, the sound switches between STErEO and MONO. In a poor reception area, select MONO for a clear, interference-free broadcast.

PrESETTING STATIONS

Example : Presetting FM 89.10 in the memory 1. Press the TUNEr button to select the FM band. Press the ,,. button to select 89.10. Press the TUNEr MEMOrY button. 4. Press the [,] button to select preset number. ~ You can select between 1 and 15 presets. Press the TUNEr MEMOrY button again. To preset another station, repeat steps 2 to 5. ~ To tune in to a preset station, press the [,] button on the remote control to select a channel.

HT-Z310-ENG-0226.indd 62

2008-02-26 7:28:30

ABOUT rDS BrOADCASTING

Using the rDS (radio Data System) to receive FM stations
RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc. When tuned to an FM station which provides the RDS service, the RDS indicator lights up on the display.

rADIO

Description on rDS function
~ PTY (Program Type) : Displays the type of programme currently being broadcast ~ PS NAME (Program Service Name) : Indicates the name of broadcasting station and is composed of 8 characters. ~ RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed of maximum 64 characters. ~ CT (Clock Time) : Decodes the real time clock from the FM frequency. ~ TA (Traffic Announcement) : When this symbol flashes it shows that the traffic announcement is in progress.
RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak. displayed in all cases.
` Some stations may not transmit PTY, RT or CT information therefore this may not be

To show the rDS signals

You can see the RDS signals the station sends on the display. Press the rDS DISPLAY while listening to an FM station. Each time you press the button, the display change to show you the following information : PS NAME RT CT Frequency
PS (Program Service) : While searching, <PS> appears and then the station names will be displayed. <NO PS> appears if no signal is sent. RT(RadioText) : while searching, <RT> appears and then text messages the station sends will be displayed. <NO RT> appears if no signal is sent. Frequency : station frequency (non-RDS service)
About characters shown in the display When the display shows PS,or RT signals,the following characters are used.

Speaker system Impedance Frequency range Output sound pressure level Rated input Maximum input Dimensions (W x H x D) Weights 72 5.1ch speaker system
Front/Rear Center Subwoofer 3 140Hz~20KHz 140Hz~20KHz 45Hz~160Hz 86dB/W/M 86dB/W/M 86dB/W/M 133W 133W 135 W 266W 266W 270 W Front/Rear : 90 x 1020 x 92 mm (stand base : 280 x 280) Center : 250 x 91 x 90 mm Subwoofer : 180 x 320 x 380 mm Front : 2.8 kg, Center : 0.6 kg Rear : 2.6 kg, Subwoofer : 4.5 kg

HT-Z310-ENG-0303.indd 72

2008-03-03 11:28:23
Front/Rear Center 140Hz~20KHz 140Hz~20KHz 86dB/W/M 86dB/W/M 166W 166W 332W 332W Front : 90 x 230 x 92 mm Rear : 90 x 137 x 92 mm Center : 300 x 101 x 91.5 mm Subwoofer : 180 x 320 x 380 mm Front : 0.6 kg, Center : 0.9 kg Rear : 0.5 kg, Subwoofer : 4.5 kg Subwoofer 3 45Hz~160Hz 86dB/W/M 170W 340W
Front/Rear Center Subwoofer 3 140Hz~20KHz 140Hz~20KHz 45Hz~160Hz 86dB/W/M 86dB/W/M 86dB/W/M 166W 166W 170W 332W 332W 340W Front : 90 x 1020 x 92 mm (stand base : 280 x 280) Rear : 90 x 137 x 92 mm Center : 300 x 101 x 91.5 mm Subwoofer : 180 x 320 x 380 mm Front : 3.0 kg, Center : 0.9 kg Rear : 0.5 kg, Subwoofer : 4.5 kg
Front/Rear Center Subwoofer 3 140Hz~20KHz 140Hz~20KHz 45Hz~160Hz 86dB/W/M 86dB/W/M 86dB/W/M 166W 166W 170W 332W 332W 340W Front /Rear: 90 x 1020 x 92 mm (stand base : 280 x 280) Center : 300 x 101 x 91.5 mm Subwoofer : 180 x 320 x 380 mm Front : 3.0 kg, Center : 0.9 kg Rear : 3.0 kg, Subwoofer : 4.5 kg *: Nominal specification - Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. - Weight and dimensions are approximate.

HT-Z310-ENG-0226.indd 73

Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Region

North America

Country

CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA TRINIDAD & TOBAGO VENEZUELA COLOMBIA BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN U.K EIRE AUSTRIA SWITZERLAND RUSSIA KAZAHSTAN UZBEKISTAN KYRGYZSTAN TADJIKISTAN UKRAINE LITHUANIA LATVIA ESTONIA AUSTRALIA NEW ZEALAND CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA PHILIPPINES SINGAPORE THAILAND TAIWAN VIETNAM TURKEY SOUTH AFRICA U.A.E

Customer Care Center

1-800-SAMSUNG(726-7864) 01-800-SAMSUNG(726-7864) 1-800-SAMSUNG(726-7864) 0800-333-3733 0800-124-421 , 4004-0000 800-SAMSUNG(726-7864) 00-1800-5077267 800-7919267 0-800-507-7267 1-800-10-7267 800-6225 1-800-299-0013 1-800-234-7267 800-7267 1-800-682-3180 1-800-751-2676 1-800-SAMSUNG(726-7864) 0-800-100-5303 01-(0)844 Distributor pro eskou republiku: Samsung Zrt., eska organizan sloka Vyskoilova 4, 14000 Praha 70 030-3260 SAMSUNG ( 0,15/Min), 65 ( 0,15/Min) 01805 - SAMSUNG(726-7864) ( 06-80-SAMSUNG(726-7864) 800-SAMSUNG(726-7864) 0035 (0)0,14/Min)