Caution

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. Leaking, overheating, or damaged battery could result in fire or injury. Use battery with the correct specification for the camera. Do not short circuit, heat or dispose of battery in fire. Do not insert the battery with the polarities reversed. Remove the battery when not planning to use the camera for a long period of time. Otherwise the battery may leak corrosive electrolyte and permanently damage the cameras components. Do not fire the flash while it is in contact with hands or objects. Do not touch the flash after using it continuously. It may cause burns. Do not move the camera while it is switched on, if you are using the AC Charger. After use, always switch off the camera before unplugging the cable from the wall socket. Then make sure that any connector cords or cables to other devices are disconnected before moving the camera. Failure to do so may damage the cords or cables and cause a fire or electric shock. Take care not to touch the lens or lens cover to avoid taking an unclear image and possibly causing camera malfunction. Avoid obstructing the lens or the flash when you capture an image. When using this camera in low temperature, the following cases may be found. Those are not camera malfunction and usually recover at normal temperature. - It takes more time to turn on the LCD monitor and the colour may be differ from the subject. - When changing the composition, there may be after image on the LCD monitor. Credit cards may be demagnetized if left near case. Avoid leaving magnetic strip cards near the case.

Contents

System chart Identification of features Self-timer lamp Camera Status Lamp Connecting to a Power Source How to charge the rechargeable battery (SLB-0837) Inserting the memory card Instructions on how to use the memory card When Using the Camera for the First Time 14 POWER button SHUTTER button FR (Face Recognition) / Lock button ZOOM W / T button Info / Up ( ) button Macro / Down ( ) button Flash / Left ( ) button Self-timer / Right ( ) button M (Mode) button Fn button E (Effect) button E (Effect) button : Colour E (Effect) button : Special Colour E (Effect) button : Image editing E (Effect) button : Fun Preset focus frames Composite shooting Photo Frame MENU / OK button Using the LCD monitor to adjust the camera settings Sharpness Contrast Auto Focus type Voice Memo Voice Recording Recording the movie clip without voice SCENE mode 44

Insert the battery as shown - If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+ / -). - When the battery chamber cover is opened, do not press the battery chamber cover by force. This may cause damage to the battery chamber cover.
Inserting the memory card
Insert the memory card as shown. - Turn off the cameras power before inserting the memory card. - Have the front of the memory card facing toward the back of the camera (LCD monitor) and the card pins toward the front of the camera (Lens). - Do not insert the memory card the wrong way round. Doing so may damage the memory card slot.
There are 4 indicators for battery condition that are displayed on the LCD monitor. Battery indicator Battery status Low battery capacity Low battery capacity Low battery capacity The battery is (Prepare to recharge (Prepare to recharge (Prepare to recharge fully charged or use spare battery) or use spare battery) or use spare battery)
Instructions on how to use the memory card
Be sure to format the memory card (see p.83) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory cards performance. Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty. The memory card is an electronic precision device. Do not bend, drop or subject the memory card to any heavy impact. Do not store the memory card in an environment with strong electronic or magnetic fields, e.g. near loud speakers or TV receivers. Please do not use or store in an environment where there are extremes in temperature. Do not allow the memory card to become dirty or to come into contact with any liquid. Should this happen, clean the memory card with a soft cloth. Please keep the memory card in its case when not in use. During and after periods of extended use, you may notice that the memory card is warm. This is perfectly normal. Do not use a memory card that is used in another digital camera. To use the memory card in this camera, format the memory card using this camera. Do not use a memory card formatted by another digital camera or memory card reader. If the memory card is subjected to any of the following, the recorded data may become corrupted : - When the memory card is used incorrectly. - If the power is switched off or the memory card is removed while recording, deleting (formatting) or reading. Samsung cannot be held responsible for lost data. It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard disks, CD etc. If there is insufficient memory available : A [Memory Full!] message will appear and the camera will not operate. To optimise the amount of memory in the camera, replace the memory card or delete unnecessary images stored on the memory card.

[PROGRAM mode]

How to use the MOVIE CLIP mode ( ) A movie clip can be recorded for as long as the available recording time of the memory capacity allows. 1. Select the MOVIE CLIP mode by pressing the mode button. (Available recording time will display on the LCD monitor) [MOVIE CLIP mode] 2. Point the camera towards the subject and compose the image by using the LCD monitor. Press the shutter button and movie clips are recorded for as long as the available recording time allows. Movie clips will still be recorded if the shutter button is released. If you wish to stop recording, press the shutter button again. * Image size and type are listed below. - Image size : 640x480, 320x240 (Selectable) - File type : *.avi (MPEG-4) You can record the movie without voice. (p.44)
If the auto focus frame turns to red when you press the shutter button down half way, it means that the camera cannot focus on the subject. Should this be the case, the camera is unable to capture an image clearly.
Pausing while recording a movie clip (Successive Recording) This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Using this function, you can record your favourite scenes into a movie clip without having to create multiple movie clips. How to use the ASR (Advanced Shake Reduction) mode ( ) This mode will reduce the effect of camera shake and help you get a wellexposed image in dim conditions. Press the ASR button. Things to watch out for using the ASR mode Using Successive Recording 1. Press the shutter button and movie clips are recorded for as long as the available recording time. Movie clips will still be recorded if the shutter button is released. 2. Press the Pause button to pause recording. Press the Pause button again to resume the recording. 3. If you wish to stop recording, press the shutter button again. 1. The digital zoom will not operate in the ASR mode. 2. If the lighting conditions are brighter than fluorescent lighting condition, the ASR doesnt activate. 3. If the lighting condition is darker than in [ASR mode] fluorescent lighting condition, camera shake warning indicator ( ) will display. For best results only take pictures in situations where the camera shake warning indicator ( ) is not displayed. 4. If the subject is moving the final image captured may be blurred. 5. Avoid moving the camera while the [Capturing!] message is displayed to achieve a better result. 6. As the ASR uses the cameras digital processor, images taken using the ASR may take a little longer for the camera to process.

Using the camera buttons to set the camera
The recording mode function can be set up by using the camera buttons. FR (Face Recognition) / Lock button This button is for quick and easy pictures of people. In MP3 and PMP mode, this button will lock the camera buttons.
POWER button Used for turning the cameras power on / off. If there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Refer to page 81 for more information about the auto power off function.
SHUTTER button Used for taking an image or recording voice in the RECORDING mode. In MOVIE CLIP mode : Pressing the shutter button down fully starts the process for recording a movie clip. Press the shutter button once and the movie clip is recorded for as long as the available recording time in the memory allows. If you wish to stop recording, press the shutter button again. In STILL IMAGE mode : Pressing the shutter button down halfway activates the autofocus and checks the condition of the flash. Pressing the shutter button down fully takes and stores the image. If you select voice memo recording, the recording will start after the camera has finished storing the image data.

ZOOM W / T button

This camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 15X. WIDE Zoom Optical zoom WIDE : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear farther away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its farthest from the camera.
TELE Zoom Optical zoom TELE Digital zoom TELE
: Pressing the ZOOM T button. This will zoom into the subject i.e. the subject will appear nearer. : When the maximum (3X) optical zoom is selected, pressing the ZOOM T button activates the digital zoom software. Releasing ZOOM T button stops the digital zooming at the required setting. Once the maximum digital zoom (5X) is achieved, pressing the ZOOM T button will have no effect.

Select a desired menu by pressing button and press the OK button. : 2 different shots are combined in a still image. : 3 different shots are combined in a still image. : 4 different shots are combined in a still image. : 2 different panorama shots are combined in a still image. After selecting a desired menu, press the shutter button to take a picture.

Pressing the OK button

OK Save

[The final picture]

[Second shot]
After taking the last image, press the OK button to save the image.
You can use the flash, self-timer, macro focus and the Zoom W / T button during the composite shooting. If you press the Play mode, Menu, E button or Mode button during the composite shots, each camera working mode is executed. The images captured before will be deleted.
Changing a part of composite shot before taking the last shot Before taking the last composite shot, you can change a part of composite shot. 1. During the composite shots, press the Fn button. 2. A previous image will be deleted and new frame will display. If there is an image taken before, press the Fn button again and a previous image will be deleted again. Changing a part of composite shot after taking the last shot 1. After taking the last shot, a cursor to select a frame will display. Press the button to select the frame. 2. Press the Fn button and an image will be deleted. Composite frame will be activated. 3. Press the Shutter button. You can take other images again by using the button and Fn button. 4. Press the OK button again to save the captured image.
SH Capture Fn Delete SH Capture Fn Delete
Pressing the button [Moving backward to the 2nd shot]
OK Save Fn Delete OK Save Fn Delete
[Before taking the 3rd shot]

[After taking 4th shot]

[Moving backward to the 2nd shot]
3. Press the shutter button to capture a new image.
Pressing the Fn button Pressing the Shutter button
[Deleting 2nd shot] Pressing the OK button

[Taking 2nd shot again]

Photo Frame You can add 8 types of frame-like borders to a still image you want to capture. Date & Time information will not be printed on the stored image taken with Photo Frame menu. Press the E button in an available recording mode. (p.33)

Fun Frame Photo

The selected photo frame will display. Press the shutter button to take a picture.

Move E Exit Frame OK Set

When the Photo Frame image is displayed on the LCD monitor, some part of the image may not display. But the image has no problem and correct image will display when displaying on the computer.

Fn Frame

Select a desired sub menu by pressing the

MENU / OK button

MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the following are selected : MOVIE CLIP and STILL IMAGE mode. There is no menu available when the VOICE RECORDING mode is selected.

Using the LCD monitor to adjust the camera settings
You can use the menu on the LCD monitor to set up recording functions. The items indicated by Menu Soft+ Sharpness Normal Vivid+
RECORDING Sharpness Contrast Auto Focus Voice Memo Voice Record Move
are default settings. Sub menu Soft Vivid Normal p.42 p.42 Available mode Page

Contrast

Normal Normal Center AF Off

High Low

Pressing the MENU button [Menu off]

Auto Focus

MENU Exit

Center AF

Multi AF

[Menu on]

Voice Memo OK button - When the menu is displayed on the LCD monitor, this button is used for shifting the cursor to the sub menu or for confirming data. Voice Record Voice Mute Scene mode

Off Off

On p.43 ~ 44 On

p.44 p.44

Menus are subject to change without prior notice.

Sharpness

You can adjust the sharpness of the picture you are about to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. Icon Menu Soft+ Soft Normal Vivid Vivid+
RECORDING Sharpness Contrast Auto Focus Voice Memo Voice Record Back OK Set Soft+ Soft Normal Vivid Vivid+

Auto Focus type

You can select your preferred Auto Focus type according to the shooting condition. - Center AF : The rectangular area in the center of the LCD monitor will be focused - Multi AF : This camera selects a AF point from the 5 AF points.
RECORDING Sharpness Contrast Auto Focus Voice Memo Voice Record Back OK Set

Center AF Multi AF

Description The edges of the image are softened. This effect is suitable for editing images on your PC. The edges of the image are sharp. This is suitable for printing. The edges of the image are emphasized. The edges will appear sharp, but noise may occur in the recorded image.

[Center AF]

[Multi AF]
You can set the difference between bright part of the image and dark part of the image. - High : The difference between bright par of the image is high. - Normal : The difference between bright par of the image is normal. - Low : The difference between bright par of the image is low.

When the camera focuses on the subject, the auto focus frame turns too green. When the camera doesn't focus on the subject, the auto focus frame turns to red.

High Normal Low

Voice Memo
You can add your voice-over to a stored still image.

Voice Recording

A voice can be recorded for as long as the available recording time (max : 10 hour) allows.

Off On

- If the voice memo indicator is displayed on the LCD monitor, the setting is completed. - Press the shutter button and take a picture. The picture is stored on the memory card.
Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recording time (max:10 hour) allows. The recording time will be displayed on the LCD monitor. Voice will still be recorded if the shutter button is released. - If you wish to stop recording, press the shutter button again. - File type : *.wav

[Voice recording menu]

- Voice memo will be recorded for ten seconds from the moment the picture is stored. In the middle of the sound recording, pressing the shutter button will stop the voice memo.

SH Stop

SH REC

[Voice recording mode]

Pausing while recording a voice Using this function, you can record your favorite voice clips into a voice recording file without having to create multiple voice recording files. 1. Press the Pause button ( ) to pause recording. 2. Press the Pause button ( ) again to resume the recording. 3. If you wish to stop recording, press the shutter button again.
Recording the movie clip without voice
You can record the movie without voice. Select [Voice Mute] menu in the Movie clip mode. ( ) icon will display on the LCD monitor. Press the Shutter button and a movie will record for as long as the memory capacity allows without voice.

RECORDING Voice Mute

[Pausing the voice recording]

[Mic. Off menu]

A distance of 40cm between you and the camera (microphone) is the best distance to record sound. If the camera power is turned off while the voice recording is paused, the voice recording is cancelled.

SCENE mode

Use the menu to easily configure optimal settings for a variety of shooting situations. Press the Menu button and select a desired sub menu. Refer to page 19 for more information.
RECORDING Scene Mode Auto Focus Voice Memo Voice Record
Nightscene Portrait Children Landscape Close up Text OK Set

[Scene menu]

Starting play mode
Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. Playing back a still image 1. Select the PLAY mode by pressing the play mode button ( ). Playing back a movie clip 1. Select the recorded movie clip that you want to play back by using the button. 2. Press the play & pause button ( ) to play back a movie clip file. - To pause a movie clip file while playing it back, press the play & pause button again. - Pressing the play & pause button again will cause the movie clip file will restart. - To rewind the movie clip while it is playing, press the button. To fast forward the movie clip, press the button. - To stop playback of the movie clip, press the play & pause button, and then press the or button.

PICTBRIDGE Images Size Layout Type Quality Date Back
Auto Postcard Card 4X6 L 2L OK Set

[Paper Size]

Menu Size
0 Prev SH Exit Next OK Set SH Exit OK Set 0
Function Set the size of the printing paper
Sub menu Auto, PostCard, Card, 4X6, L, 2L, Letter, A4, A3

Layout Type Quality

[When [One Pic] is selected]
[When [All Pics] is selected]
Set the number of pictures to be Auto, Full, 1, 2, 4, 8, 9, 16, Index printed on a sheet of paper Set the quality of the printing Auto, Plain, Photo, FastPhoto paper Set the quality of the picture to be printed Set whether to print the date Auto, Draft, Normal, Fine Auto, Off, On Auto, Off, On
- Press the button to select the number of prints. - When [One Pic] is selected : Use the button to select another picture. After selecting another picture, select the number of prints for another picture. - After setting the number of prints, press the OK button to save. - Press the Shutter button to return to the menu without setting the number of prints. 4. Press the Print button ( ) and images will be printed.
Set whether to print the file File Name name
Some menu options are not supported on all printers. If not supported, the menus are still displayed in the LCD, but are not selectable.

PictBridge : Reset

Initialises user-changed configurations. 1. Use the buttons to select the [Reset] menu tab. And then press the button. 2. Use the buttons to select the desired sub menu value, and then press the OK button. - If [No] is selected : Settings will not be reset. - If [Yes] is selected : All print and image settings will be reset.
PICTBRIDGE Layout Type Quality Date File Name Reset Back

Sound menu

In this mode, you can set up sound settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by are default settings. Mode

No Yes OK Set

Sub Menu Off Low

Available Mode

Volume

Medium High Off

Default print setting varies depending on the printer manufacturer. For your printers default setting, refer to the users guide that came with your printer. Start Sound

If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. Sub menus [Off]
: The quick view function cant be activated. [0.5, 1, 3 sec] : The captured image is briefly displayed during the selected time.
SETUP2 Quick View Power Off LCD Save Video Out Set Password Format Back

Off 0.5 sec 1 sec 3 sec

[ Auto power off ]
This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. Sub menus [1, 3, 5, 10 min] : The power will turn off automatically if not used for the period of time specified.
- After replacing the battery, the power off setting OK Set will be preserved. - Note that the automatic power off function will not operate if the camera is in the PMP, MP3, Text Viewer mode, PC / Printer mode, slide show, playing back a voice recording and playing back a movie clip.

1 min 3 min 5 min 10 min

[ Selecting Video out type ]
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. - PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway.
The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.
Connecting to an external monitor When the camera is connected to an external monitor in the play back mode, the image (movie or still image) will be visible on the external monitor and the LCD monitor of the camera turns off.
- When using a TV as an external monitor, you will need to select the external or AV channel of the TV. - There will be a digital noise on the external monitor, but it is not a malfunction.
- If the image is not in the centre of the screen, use the TV controls to centre it.

NTSC PAL OK Set

- When the camera is connected to an external monitor, some parts of the image may not display. - When the camera is connected to an external monitor, the menu will be visible on the external monitor and the menu functions are the same as those indicated on the LCD monitor. - When the camera is connected to an external monitor, the button sound may not sound. - When you connect the A/V cable in a recording mode, the camera mode is changed to the Playback mode automatically and an image will be displayed.

Before deleting files from the camera, take care to download files you want to keep to your computer.
Hold / Equalizer button If you press the Hold button for over 1 second, the camera buttons are locked. - If the camera buttons are locked, the buttons can't be operated while playing back. But Power off, Video out, USB connection and LCD on functions can be operated. Playlist button While a multimedia file is playing back, you can select a desired file by using the browsing menu. 1. While a multimedia file is playing back, press the Playlist button ( 2. A playlist that is currently playing will be highlighted. 3. Move the cursor to a desired list by pressing the Control button. Pressing the OK button : the selected file is played back. Pressing the Playlist button : the selection will be cancelled. ).

[MP3 Mode]

[PMP Mode]

[TEXT VIEWER Mode]

- If you press the Lock button again or turn off the camera, the camera is unlocked.
The user can select appropriate sound with this setting. - Press the E button and select either <SRS>, <Normal>, <Live>, <Classic>, <Jazz>, <Rock> or <Dance>.
Setting up the playback function using the LCD monitor
MP3 / PMP / Text Viewer mode functions can be changed by using the LCD monitor. Press the MENU button and the menu will display on the LCD monitor. Menu tab Main menu Resume Play Mode MP3 Off Play All Repeat All Random Repeat MP3 Skin Show Play Show Interval Delete All Resume Seeking PMP Player Display Delete All Default 1 User Skin 1 Play 2 sec 5 sec No Off 30 sec 3 min 10 min 5 sec Off No Sub menu On Repeat One Random Default 2 User Skin 2 Repeat Play 3 sec Yes On 1 min 5 min On Yes Menus are subject to change without prior notice. p.93 p.92 p.92 Delete All No Yes p.91 p.92 p.92 p.92 p.91 TEXT VIEWER MP3 BGM p.91 Auto Scroll Page p.91 Menu tab Main menu Resume Off Off 1.1 sec 1.7 sec Off ENGLISH DEUTSCH ESPAOL Language DANSK BAHASA PORTUGUS SVENSKA POLSKI Sub menu On 0.8 sec 1.4 sec 2.0 sec On FRANAIS ITALIANO DUTCH SUOMI Magyar p.92 p.94 p.94 p.93 Page p.91
Resume You can set the playback type. 1. Press the Menu button in each mode. 2. Select a desired playing type in the [Resume] menu by pressing the button and pressing the OK button. Play mode You can set various repeat and shuffle options. Play Mode This function is adopted only in the selected folder. Play All Repeat One Repeat All [Play All] : plays a single track once. Random Random Repeat [Repeat One] : plays a single track repeatedly. Move MENU Exit [Repeat All] : plays all tracks in the folder repeatedly. [Random] : randomly plays all tracks in the folder once. [Ramdom Repeat] : randomly plays all tracks in the folder repeatedly.

- If the characters of the text file don't display DEUTSCH ESPAOL correctly, open the file on Windows 2000 or later ITALIANO Move MENU Exit and save it again. We recommend using 'Notepad' and it has to be saved as ANSI encoding type. - Some unique characters may not be displayed correctly on the camera. - Encode the text files as the standard type or some characters may not be displayed correctly.
Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture build up can also occur in the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed. Caution on Using the Lens - If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of the image sensor. - Don't get fingerprints or foreign substances on the surface of the lens. If the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to remove the batteries and the memory card if you do not intend using the camera for an extended period of time. If the camera is exposed to an electronic interference, it will turn itself off to protect the memory card. Camera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell of the camera and also affect its performance. Rough handling can damage the LCD monitor. Take care to avoid damage and keep the camera in its protective carry case at all times when not in use. Do not attempt to disassemble or modify the camera. Under certain conditions, static electricity can cause the flash unit to fire. This is not harmful to the camera and is not a malfunction. When images are uploaded or downloaded (when the charger and USB cable are inserted into the cradle at the same time), the data transfer may be affected by static electricity. In this case, disconnect and re-connect the USB cable before trying the transfer again. Before an important event or going on a trip, you should check the camera condition. - Take a picture to test the camera and always carry a spare fully charged battery. - Samsung cannot be held responsible for camera malfunctions. Do not use headphones/earphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and can be illegal in some areas. Avoid using headphones/earphones at high volume. Hearing experts advise against continuously loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use.

No image on external monitor The external monitor has not been connected properly with the camera Check the connection cables There are incorrect files in the memory card Insert a memory card that has correct files When using the PCs explorer, the Removable Disk (SAMSUNG) file does not show Cable connection is incorrect Check the connection The camera is off Turn the camera on The operating system is not Windows 98SE, 2000, ME, XP, Vista / Mac OS 10.1 ~ 10.4. Alternatively the PC does not support USB Install Windows 98SE, 2000, ME, XP, Vista / Mac OS 10.1 ~ 10.4 to PC that supports USB The camera driver is not installed Install a [USB Storage Driver]

Specification

Image Sensor - Type : 1/2.5 CCD - Effective Pixel : Approx. 7.2 Mega Pixels - Total Pixel : Approx. 7.4 Mega Pixels Lens - Focal Length : f = 6.3 ~18.9mm (35mm equivalent : 38 ~114mm) : NV lens - F No. : F 3.5 ~ F 4.5 - Digital Zoom : Still Image mode : 1.0X ~ 5.0X Play mode : 1.0X ~ 12.0X (depends on image size)
LCD Monitor 3.0" wide color TFT LCD (230,000 dots) Focusing - Type : TTL auto focus, Multi-AF, Center AF, Face Recognition AF - Range Normal Wide Tele Shutter Exposure 80cm ~ infinity Macro 5cm ~ 80cm 40cm ~ 80cm Super Macro 1cm ~ 5cm Auto Macro 5cm ~ Infinity 40cm ~ Infinity
- Speed : 1 ~ 1/2,000 sec. (Night : 16 ~ 1/2,000 sec.) - Control : Program AE, Metering : Multi, Spot, Center, Face Recognition - Compensation : 2EV (1/2EV steps) - ISO Equivalent : Auto, 80, 100, 200, 400, 800, 1000 - Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off, Red eye fix - Range : Wide : 3.3m, Tele : 2.5m (ISO Auto) - Recharging Time : Approx. 5 sec. Soft+, Soft, Normal, Vivid, Vivid+
E (Effect) button Effect - Colour : B & W, Sepia, Red, Green, Blue, Negative, Custom colour Special Colour : Colour Mask Image Adjustment : Saturation FUN : Preset focus frame, Composite, Photo Frame
Image Editing - Resize, Rotate Colour : B&W, Sepia, Red, Green, Blue, Negative, Custom Colour Special Colour : Colour Filter, Colour Mask Image Adjustment : Red eye reduction, Brightness, Contrast, Sturation, Noise Effect FUN : Cartoon, Preset Focus Frame, Composite, Photo Frame, Sticker, Text typing White Balance Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom Voice Recording Voice Recording (max. 10 hours), Voice Memo in Still Image (max. 10 sec.) Date Imprinting Date, Date&Time, Off (user selectable) Shooting - Still Image : Auto, Program, ASR, Scene, Multimedia (MP3, PMP, TextViewer) Scene : Night, Portrait, Children, Landscape, Close-up, Text, Sunset, Dawn, Backlight, Fireworks, Beach & Snow, Self shot, Food, Cafe Continuous : Single, Continuous, AEB (0.3 step, Max. 3 shots), Wise Shot Self-timer : 10 sec., 2 sec., Double (10 sec. & 2 sec.) With Audio (recording time : Depend on Storage size) Size : 640x480, 320x240 (Optical 3X zoom with sound recording) Frame rate : 30fps, 15fps Color Effect & WB selectable Movie Editing (Embeded) : Pause during recording, Still Image Capture, Time Trimming To record the movie, a memory card must be inserted. Super Fine Fine Normal Storage - Media : Internal memory : About 10MB External memory : SD / MMC / MMC + / HSMMC (Min. 32MB - Max. 2GB guaranteed) * Internal memory capacity is subject to change without prior notice. - File Format : Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0 Movie Clip : AVI (MPEG-4) Audio : WAV - Capacity (MMC 512MB) 3072x2304 2592x1944 2048x1536 1024x768 3072x1728 2560x1440 1280x720 3072x425 These figures are measured under Samsungs standard conditions and may vary depending on shooting conditions and camera settings. Image Play Interface - Type : Single image, Thumbnail, Slide show (Effect, B.G.M), Album, Movie - Digital output connector : USB 2.0 - Audio : Mono - Video output : NTSC, PAL (user selectable, Only in the playback mode) - DC power input connector : 24-pin connector

Disconnecting the camera and PC : Refer to "Removable Disk" (p.106) 3. Select an image and press the right mouse button.
Before inserting any cables or AC adapter, check the directions and do not insert by force. It may cause breakage of cable or camera. 4. A pop-up menu will open. Click the [Cut] or [Copy] menu. - [Cut] : cuts a selected file. - [Copy] : copies files. 5. Click a folder where you want to paste the file.

Removable Disk

Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My Computer] and double click [Removable Disk (SAMSUNG) DCIM 100SSCAM].
6. Press the right mouse button and a pop-up menu will open. Click [Paste].
7. An image file is transferred from the camera to your PC.
We recommend that you should copy the images to the PC to view them. Opening images directly from the removable disk may be subject to unexpected disconnection. When you upload a file that is not taken by this camera to the Removable Disk, the [File Error!] message will be displayed on the LCD monitor in the PLAY mode, and nothing is displayed in THUMBNAIL mode. 2. Double-click the [Unplug or Eject Hardware] icon on the task bar.

[Double Click!]

3. The [Unplug or Eject Hardware] window will open. Select the [USB Mass Storage Device] and click the [Stop] button.
Removing the removable disk
Windows 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Unplug the USB cable. Windows 2000 / ME / XP / Vista (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on.
4. The [Stop a Hardware device] window will open. Select the [USB Mass Storage Device] and click the [OK] button.