Contents

007 007

System chart

Package Contents Sold Separately

010 010

Identication of features
Front & Top Back Bottom 5 Function button
Connecting to a power source Inserting the battery Inserting the memory card Instructions on how to use the memory card When using the camera for the rst time LCD monitor indicator Starting the Recording mode
Selecting modes How to use the Auto mode How to use the Program mode How to use the Manual mode How to use the DUAL IS(Dual Image Stabilization) mode Using the Photo Help guide mode How to use the Beauty Shot mode How to use the Scene modes How to use the Movie clip mode Recording the movie clip without sound Pausing while recording a movie clip (Successive Recording)

RECORDING

019 020

036 036

Things to watch out for when taking pictures Focus lock Using the camera buttons to set the camera POWER button Shutter button ZOOM W / T button Function Description / Info / Up button Macro / Down button Flash / Left button Self-timer / Right button MENU / OK button Fn button

How to use the Fn menu

044 044
Colour Sharpness Contrast Saturation
OIS button: Optical image Stabilization Using the LCD monitor to adjust the camera settings Face Detection Focus Area ACB Voice Memo Voice recording Recording the movie clip without voice Scene mode Starting play mode
Playing back a still image Playing back a movie clip Movie clip capture function On camera movie trimming Playing back a recorded voice Playing back a voice memo

042 043

Fn button: Size Fn button: Quality / Frame rate Fn button: Metering Fn button: Drive mode Fn button: ISO Fn button: White balance Fn button: Exposure compensation Fn button: Aperture Value Fn button: Shutter Speed Fn button: Movie clip frame stabiliser E (Effect) button E (Effect) button: Image editing

053 054

054 055

055 055

LCD monitor Indicator Using the camera buttons to set the camera
Play mode button Thumbnail/ Enlargement button

057 057

Info / Up button Play & Pause / Down button

062 062

Left / Right / Menu / OK button Print button Delete button E (Effect) button: Resize E (Effect) button: Rotating an image E (Effect) button: Colour E (Effect) button: Image editing

ACB Red eye removal Face Retouch Brightness control Contrast control Saturation control

073 073

Volume Start up Sound Shutter Sound Beep Sound AF Sound Self Portrait

074 075

080 081

Setup menu Display

063 064

068 071

Setting up the play back function using the LCD monitor Starting the slide show
Start the slide show Selecting Images Congure slide show effects Setting play interval Setting Background Music Voice memo Protecting images Deleting images DPOF Copy To Card
Language Setting up the Date / Time / Date type Start up image Display brightness Quick view Display Save Formatting a memory Initialisation Recycle Bin File name Imprinting the recording date Auto power off Selecting video out type Auto focus lamp

Settings

Playback

Sound menu

083 083
PictBridge PictBridge: Picture Selection PictBridge: Print Setting PictBridge: Reset

SOFTWARE

Software notes System requirements About the software Setting up the application software Starting PC mode Removing the removable disk Samsung Master Setting up the USB Driver for MAC Using the USB Driver for MAC Specications Important notes Warning indicator Before contacting a service centre FAQ Correct Disposal of This Product Correct disposal of batteries in this product

APPENDIX

Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre.

Package Contents

Camera
User manual, Product warranty

Camera strap

AV cable
Rechargeable battery (SLB-10A)
AC adapter (SAC-47)/ USB cable (SUC-C3)
Software CD (see p.84~85)

Sold Separately

SD/SDHC memory card/ MMC (see p.17)

Camera case

Front & Top
Mode dial Speaker Shutter button POWER button AF sensor/ Self-timer lamp Flash Microphone
Zoom T button (Digital zoom) Zoom W button (Thumbnail)
Camera status lamp LCD monitor Camera strap E (Effect) button
Fn / Delete button 5-function button
Play mode / Print button OIS button

USB / AV / DC terminal

Bottom 5 Function button
Battery chamber Function Description/Information/Up button

Scene mode Movie Clip mode Beauty Shot mode

Select point Auto mode

Photo help guide mode

Program mode Manual mode

DUAL IS(Dual Image Stabilization) mode
If the auto focus frame turns to red when you press the Shutter button down half way, it means that the camera cannot focus on the subject. Should this be the case, the camera is less likely to capture an image clearly. Avoid obstructing the lens or the ash when you capture an image.
How to use the Program mode
Selecting the automatic mode will congure the camera with optimal settings and you can manually congure various functions.
1. Select the Program mode by using the Mode dial. (p.20) 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the Shutter button to capture an image. Refer to page 37-41 for more information about the Program mode menus.
How to use the DUAL IS(Dual Image Stabilization) mode
This mode will reduce the effect of camera shake and help you get a well exposed image in dim conditions.
1. Select the DUAL IS mode by using the Mode dial. (p.20) 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the Shutter button to capture an image.
How to use the Manual mode
The user can manually set both the aperture value and the shutter speed.
1. Select the Manual mode by using the Mode dial. (p.20) 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the Shutter button to capture an image. Refer to page 41 for more information about the menus.

F 2.8 1/20

Things to watch out for using the DUAL IS mode The digital zoom will not operate in the DUAL IS mode. If the lighting conditions are brighter than uorescent lighting conditions, the DUAL IS will not activate. If the lighting conditions are darker than in uorescent lighting conditions, camera shake warning indicator ( ) will be displayed. For best results only take pictures in situations where the camera shake warning indicator ( ) is not displayed. If the subject is moving, the captured image may be blurred. For best results, avoid moving the camera while the [Capturing!] message is displayed. As the DUAL IS uses the cameras digital signal processor, it may take a little longer for the camera to process and save the images. If the image size is ( ) or ( ) , the DUAL IS mode cant be selected.

Using the Photo Help guide mode
Helps the user learn the correct picture taking method and includes solutions for potential problems that may occur. This also enables the user to practice the best way to take pictures.
Available functions of the photo help guide Function that can be used when focusing is difcult Function that can be used when the image is blurred Function that can be used when lming in the dark Function that can be used when adjusting the picture brightness Function that can be used when adjusting the picture colour
Function that can be used when focusing is difcult
Features to use when the image is out of focus Features to counter camera shake Features to use in low light conditions Features to use when adjusting brightness Features to use when adjusting colours

Move Next

Pressing the Left/Right button.
Features to use when the image is out of focus Half press shutter button to focus To focus on a subject 80cm or more away To focus on a subject less than 80cm away To focus on peoples faces
Help press shutter button to focus Focusing status can be checked by half-pressing shutter button - Green: Focusing successful - Red: Focusing failed

Practice

Pressing the MENU button. Pressing the Up/Down button.

00005 00005

Help press shutter button to focus When focusing is successful, fully press the shutter button to shoot. If focusing fails, half press the button again.

Back Practice

Pressing the Shutter button.

Guide list

Practice begins when you press the shutter.
Pressing the Right button.
How to use the Beauty Shot mode
Take a photo of portraits by setting options to clear facial imperfections.
1. Select the Beauty Shot mode by using the Mode dial. (p.20) 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the MENU button. 4. Press the Up/Down button to select [Face Tone] or [Face Retouch]. 5. Press the Right button, then press the Up/Down button to select a desired level of each function. The higher the level is, [Face Tone] becomes brighter and [Face Retouch] features better performance. 6. Press the OK button to nish your setting. 7. Capture images in Recording mode by pressing the Shutter button.

<Menu off>

<Menu on>

OK button

When the menu is displayed on the LCD monitor, this button is used for shifting the cursor to the sub menu or for conrming data.
* In [Children] scene mode, [DRIVE] is available.
1. Press the Fn button in an available mode 2. Select a desired menu by pressing the Up/Down button. And then a sub menu will be displayed on the bottom left side of the LCD monitor.

Fn button: Size

You can select the image size appropriate for your application.
Still image Mode Still image Mode Icon Size Icon Size
800x592 640x480 320x240 4224x 3168 4224x 2816 4224x 2376 3264x 2448 2592x 1944 2048x 1536 1024x 768

SIZE QUALITY

Up/Down button

4224X3168 800X592

3. Select a desired menu by pressing the Left/Right button and then press the OK button. < Still image mode >

SIZE 4224X2816

< Movie clip mode >
The higher the resolution, the lower the number of shots available because high resolution images require more memory.

Left/Right button

Fn button: Quality / Frame rate
You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality.
Mode Icon Sub menu File Format Super Fine jpeg Fine jpeg Normal 30 FPS 20 FPS 15 FPS jpeg avi avi avi Still image Mode Movie clip mode

Fn button: Metering

If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures.

Metering Mode

Description Exposure will be calculated based on an average of light in each image area divided into multiple regions. However, the calculation will be biased towards the centre of the image area. This is suitable for general use. Only the rectangular area in the centre of the LCD monitor will be metered for light. This is suitable when the subject in the centre is exposed correctly, regardless of the back lighting. Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for taking a picture of small objects like owers or insects.

20 FPS

Spot < Still image mode > < Movie clip mode >
This le format complies with the DCF (Design rule for Camera File system). JPEG (Joint Photographic Experts Group): JPEG is the image compression standard developed by the Joint Photographic Experts Group. This type of compression is most commonly used for compressing photos and graphics because it can compress the les efciently.

Center Weighted

If the subject is not the centre of the focus area, do not use the [Spot] metering as this may result in an exposure error. In this circumstance, it is better to use exposure compensation.

2. The OIS icon ( the left side.

) will be displayed on

3. Press the Shutter button halfway. The shutter speed and aperture value will be displayed on the LCD monitor. Also this camera activates the stabilizing function. 4. Press the Shutter button fully to take a picture.
OIS function may not work suf ciently in the following cases. To take pictures of a moving subject To take pictures with higher digital zoom values When camera shake is beyond the camera-shake correction range When the shutter speed is slow If you activate the OIS function during video capture, the operation sound of the button or sensor may be recorded along.
* In [Beauty Shot], [Portrait], and [Children] mode, the [Face Detection]
function setting is set to its default value.

Face Detection

If you use face detection options, your camera can detect a human face. When focusing on a human face, the brightness of the face is also adjusted. You can also capture natural facial expressions by using self portrait, smile shot or blink detection.
Off Face Detection Self Portrait Smile Shot Blink Detection
Selectable modes: [Auto], [Program], [Manual], [DUAL IS], [Beauty Shot], [Scene] ([Portrait], [Children], [Beach&Snow])

Face Detection

This mode detects the face position of the subject automatically and then sets the focus and exposure. 1. The size and position of the auto focus frame is automatically set on the face of the subject. 2. Press the Shutter button halfway.
- When the camera detects a target face, the white colour focus frame will be displayed over the target face and the grey colour focus frame appears over the remaining faces. Press the shutter button halfway down to focus on the face and the white focus frame turns green.
This function can detect up to 10 faces. When the camera recognises many people at the same time, it will focus on the nearest person. Return to previous AF mode if face detection failed. In some conditions this function cannot work properly. - When a person wears dark glasses or some part of the face is hidden. - When the subject does not look at the camera. - Camera doesnt detect a face as the conditions are too dark or too bright. - The distance between the camera and object is too great. - If there is reection of the light or the back light that are too bright. The maximum available Face Detection range is 3m (Wide). The nearer the subject, the faster the camera can recognize the subject. When using the digital zoom, [Face Detection] is not available.

100-0017

Playing back a recorded voice
1. Select the recorded voice that you want 100-0017 to play back by using the Left/Right button. ) button 2. Press the Play & Pause ( to play back a recorded voice le. To pause a recorded voice le, while 00:02:51 playing it back, press the Play & Play ) button again. Pause ( To resume playback of the voice le, press the Play & Pause ) button ( To rewind the voice le while it is playing, press the Left button. To fast forward the voice le, press the Right button. To stop playback of the voice memo, press the Play & Pause ) button and then press the OK button. (

00:00:08 Trim Capture

00:00:14 Trim Capture

Trimming?

No Yes

00:00:14

If you dont specify the ending point of the movie clip, the trimming conrmation window will be displayed at the point of the last frame.
Playing back a voice memo
1. Select a still image that has the voice memo. ) button 2. Press the Play & Pause ( to play back the voice memo. To pause the voice memo, while playing it back, press the Play & ) button again. Pause ( To resume playback of the voice memo, press the Play & Pause ) button. ( To stop playback of the voice memo, press the Play & Pause ( ) button and then press the OK button.

LCD monitor Indicator

The LCD monitor displays shooting information about the displayed image. 3 4

100-0010 # @ !

00:00:06 Pause
Description Playback mode Folder name & File name Internal memory icon/ Memory card icon indicator Battery ISO Aperture value Shutter speed Flash Image size Recording date Voice Memo Protect DPOF

Icon 100-0010 /

Page p.51 p.78 p.15 p.39 p.32~33 p.37 p.75 p.67 p.67 p.68~70

00:00:06 Play

80 ~ 3200 F2.8 ~ 14.~ 1/1500 On/Off 4224X3168 ~ 320X240 2008/08/01
In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions.

Thumbnail(

When the menu is displayed on the LCD monitor, the Up button operates as a direction button. When the menu is not displayed on the LCD monitor, pressing the Info( ) button will display image information on the LCD monitor.

100-0010 100-0010

In Play mode, the Play & Pause ( follows:

) button

If the menu is displayed Press the Down button to move from the main menu to a sub menu, or to move down the sub menu cursor. If a still image with a voice memo, a voice le, or a movie clip is playing In Stop mode: Plays a still image with a voice memo, a voice le, or a movie clip. During playback: Temporarily stops playback. In Pause mode: Resumes playback
100-0017 100-0017 100-0017
<Voice recording is stopped>
<Voice recording is playing>
<Voice recording is paused>
Left / Right / Menu / OK button
Left/Right/MENU/OK button activate the following.
While the menu is showing, the Left button operates as a direction button. While the menu is not showing, press the Left button to select the previous image. Right button: While the menu is showing, the Right button operates as a direction button. While the menu is not showing, press the Right button to select the next image. MENU button: When you press the MENU button, the play mode menu will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. OK button: When the menu is displayed on the LCD monitor, the OK button is used for conrming data that is changed by using the 5 function button. Left button:

Delete ( ) button

This deletes images stored on the memory card. By activating the Recycle Bin function (p.78) you can restore deleted photos.
1. Select an image that you want to delete by pressing the Left/Right button and press the Delet button.

Delete?

Print (

Select

<Single Image> 2. To add images to delete, press the T button. Left/Right button: Selects images T button: Checks for deletion OK button: Deletes the selection

Off Basic Classic Memories Rhythmic Delight
When the effect is selected, the background music is changed according to the default setting of the effect. Effect Off, Basic Classic Memories Rhythmic Delight No background music. Background music is set to [Remembrance]. Background music is set to [Remembrance]. Background music is set to [First Smile]. Background music is set to [Panorama]. Description
You can change the desired music for each effect.

Setting play interval

Set the slide show play interval.
1. Select the [Interval] sub menu by pressing the Up/Down button and press the Right button. 2. Use the Up/Down button to select the desired interval. 3. Press the OK button to save the conguration.

Setting Background Music

Set the slide show music.
1. Select the [Music] sub menu by pressing the Up/Down button and press MULTI SLIDE SHOW Show Start the Right button. Images 2. Use the Up/Down button to select the Effect Interval desired Music. Music 3. Press the OK button to save the conguration. Back [Off]: Background music is not played back. [Panorama], [First smile], [Remembrance]: Selected music is played back.
MULTI SLIDE SHOW Show Start Images Effect 1 sec Interval 3 sec Music 5 sec 10 sec

Back Set

Off Panorama First Smile Remembrance
The loading time depends on the image size and quality. While the slide show is playing, only the rst frame of a movie le is displayed. While the slide show is playing, the voice recording le will not display. [Interval] is available when the effect is set to [Off], [Basic], [Classic] in the slide show. It is unavailable when the effect is set to [Memories], [Rhythmic], [Delight] in the slide show.

Playback (

Voice memo
[Select]: Selection window for an image to be protected / released is displayed. Up/Down/Left/Right button: Select an image. Zoom W/T button: Protect / release the image. OK button: Your changes will be saved and the menu will disappear. [All]: Protect / release all saved images. If you protect an image, the protect icon will be displayed on the LCD monitor. (An unprotected image has no indicator) An image in Lock mode will be protected from the delete function or [Delete] functions, but will NOT be protected from the [Format] function.
You can add your voice to a stored still image.
PLAYBACK Voice Memo Protect Delete DPOF Copy To Card On Off

Unlock

<Voice memo menu>
<Ready for recording>
<Voice is recording>
Press the Shutter button to take a picture. The images are saved on the memory. After saving the image, the voice is recording for 10 seconds. To stop the recording, press the Shutter button.

Protecting images

This is used to protect specic shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock).

1. Press the Up/Down button and select the [DPOF] menu tab. And then press PLAYBACK the Right button. Standard No 2. Press the Right button again and [Index] Index Yes Size sub menu will be displayed. 3. Select a desired sub menu by pressing the Up/Down button. Set Back If [No] is selected: Cancel the index print setting. If [Yes] is selected: The image will be printed in index format. 4. Press the OK button to conrm the setting.
3. Select a desired sub menu by pressing the Up/Down button and press the OK button. [Select]: Selection window for an image to print is displayed. Up/Down/Left/Right button: Select an image to print. Zoom W/T button: Select the number of prints. [All Pics]: Congure number of prints for all pictures except movie and voice les. Zoom W/T button: Select a number of prints. [Cancel]: Cancel the print setup.

00 images Set

Print size
[All Pics]: Change print size of all saved images. Zoom W/T button: Select a print size. OK button: Conrm the changed setting.

Cancel

You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers.
1. Press the Up/Down button and select the [DPOF] menu tab. And then press PLAYBACK Select Standard the Right button. All Pics Index 2. Press the Right button again and select Size Cancel the [Size] sub menu will be displayed. 3. Select a desired sub menu by pressing the Up/Down button and press the OK Set Back button. 100-0010 [Select]: Selection window to change the printed size of the image is displayed. Up/Down/Left/Right button: Select an image. Cancel Set Zoom W/T button: Change the print size. OK button: Your changes will be saved and the menu will disappear.
[Cancel]: Cancel all of the print size Set settings. DPOF [Size] secondary menu: Cancel, 3X5, 4X6, 5X7, 8X10
Depending on the manufacturer and print model, cancelling the printing may take a little longer for the printer to process.

Copy To Card

When this menu is selected without inserting a memory card, the [No Card!] message will be displayed. If there is not enough space available in the memory card to copy saved images in the internal memory (30MB), the [Copy To Card] command will copy only some of the images and display [Memory Full!] message. Then the system will return to the Playback mode. Please be sure to delete any unnecessary les to free up space before inserting the memory card into the camera. When you move the images that are stored in the internal memory by doing [Copy To Card] to the card, the next number of le names will be created in the card to avoid duplication of the le name. When the [Reset] of the [File] setup menu is set: The copied le names start from after the last stored le name. When the [Series] of the [File] setup menu is set: The copied le names start from after the last captured le name. After completing [Copy To Card], the last stored image of the last copied folder is displayed on the LCD monitor.

Select USB

Computer Printer
Connecting the Camera to a Printer
If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge compatible printer to the camera through USB cable with [Connecting Computer] message. In this case, remove the cable and do steps 1 and 2 again.
PictBridge: Picture Selection
You can select images you want to print. Setting the Number of Copies to Print
1. Press the MENU button and the PictBridge menu will be displayed. Pictbridge Images One Pic 2. Use the Up/Down button to select the Size All Pics [Images] menu and press the Right Layout Type button. Quality 3. Use the Up/Down button to select a Date Print Set Back desired sub menu and press the OK button. Select [One Pic] or [All Pics]. A screen where you can set the number of copies to print will appear as shown below.

Easy printing

When you connect the camera to printer in the Play back mode, you can print a picture easily. Pressing the Left/Right button: Selects a previous / next image. Pressing the Print ( ) button: Currently displayed image will be printed with the printers default setting.
<When [One Pic] is selected>
<When [All Pics] is selected>
Press the Up/Down button to select the number of prints. When [One Pic] is selected: Use the Left/Right button to select another picture. After selecting another picture, select the number of prints for another picture. After setting the number of prints, press the OK button to save. Press the Shutter button to return to the menu without setting the number of prints. 4. Press the Print ( ) button and images will be printed.
PictBridge: Print Setting
You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures.
1. Press the MENU button and the PictBridge menu will be displayed. 2. Use the Up/Down button to select the desired menu, and then press the Right button. 3. Use the Up/Down button to select the desired sub menu value, and then press the OK button. Menu Size Layout Type Quality Date Print File Name Function Set the size of the printing paper. Set the number of pictures to be printed on a sheet of paper. Set the quality of the printing paper. Set the quality of the picture to be printed. Set whether to print the date. Set whether to print the le name.

Removing the removable disk

Windows 2000/XP/Vista

(The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a le. If the camera status lamp blinks, please wait until the lamp has nished blinking and is constantly on. 2. Double-click the [Unplug or Eject Hardware] icon on the task bar.

Double-click!

5. A [Safe to Remove Hardware] window will open. Click the [OK] button. 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely.

7. Unplug the USB cable.

3. The [Unplug or Eject Hardware] window will open. Select the [USB Mass Storage Device] and click the [Stop] button.
4. The [Stop a Hardware device] window will open. Select the [USB Mass Storage Device] and click the [OK] button.

Samsung Master

You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. To run the Samsung Master, double click the Samsung Master icon on the desktop. Downloading images
1. Connect the camera to your PC. 2. A window for downloading images will display after connecting the camera to your PC. To download the captured images, select the [Select All] button. Select desired folder in the window and click the [Select All] button. You can save captured images and selected folder. If you click the [Cancel] button, downloading will be cancelled. 3. Click [Next >] button. 4. Select a destination and make a new folder in which to save downloaded images and folders. Folder names can be made in order of date and images will be downloaded. Folder name will be made as you want and images will be downloaded. After selecting a folder that was made before, images will be downloaded. 5. Click [Next >] button. 6. A window will open as shown alongside. The destination of the selected folder will be displayed on the upper side of the window. Click the [Start] button to download the images.
7. Downloaded images will be displayed.
Image viewer: You can view the stored images. Image edit: You can edit the still image.
Image viewer functions are listed below. 1 Menu bar: You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. 2 Image selection window: You can select the desired images in this window. 3 Media type selection menu: You can select image viewer, image edit and movie edit functions in this menu. 4 Preview window: You can preview an image or a movie clip and check the multi media information. 5 Zoom bar: You can change preview size. 6 Folder display window: You can see the folder location of the selected image. 7 Image display window: Images of the selected folder are displayed. Refer to the [Help] menu in Samsung Master for further information.

Image distortion appears in the picture.
The camera you have purchased uses a wide angle lens and this may cause image distortion. This is a special feature of the product.
No image on external monitor.
The external monitor has not been connected properly with the camera. Check the connection cables. There are incorrect les in the memory card. Insert a memory card that has correct les.
Incorrect date and time is displayed
The date and time have been set incorrectly or the camera has adopted the default settings. Reset the date and time correctly.
A card error has occurred while the memory card is in the camera.
Incorrect memory card format. Re-format the memory card.
When using the PCs explorer, the [Removable Disk] le does not show.
Cable connection is incorrect. Check the connection. The camera is off. Turn the camera on. The operating system is not Windows 2000, XP, Vista / Mac OS 10.3. Alternatively the PC does not support USB. Install Windows 2000, XP, Vista / Mac OS 10.3 to PC that supports USB. The camera driver is not installed. Install a [USB Storage Driver].
The images dont play back.
Incorrect le name. (Violation of DCF format) Do not change the image le name.
Colour of image is different to the original scene.
White balance or effect setting is incorrect. Select appropriate White balance and effect.

Images are too bright.

Exposure is excessive. Reset exposure compensation.
Please check the following if the USB connection malfunctions.
Case 1 USB cable is not connected or it is not the supplied USB cable. Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. Case 3 There is an unexpected error during le transfer. Turn the camera power off and on again. Transfer the le again. Case 4 When using the USB hub. There may be a problem in connecting the camera to the PC through the USB hub if the PC and the hub are not compatible. Wherever possible, connect the camera to the PC directly. Case 5 Are other USB cables connected to the PC? The camera may malfunction when it is connected to the PC at the same time as another USB cable. In this case, disconnect the other USB cable, and connect only one USB cable to the camera. Case 6 When I open the Device Manager (by clicking Start (Settings) Control Panel (Performance and Maintenance) System (Hardware) Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. Right-click on the entry with the question (?) or exclamation (!) mark and select Remove. Restart the PC and connect the camera again. Case 7 In some security programs (Norton Anti Virus, V3, etc.), the computer may not recognise the camera as a removable disk. Stop the security programs and connect the camera to the computer. Refer to the security program instructions about how to temporarily disable the program. Case 8 The camera is connected to the USB port located on the front of the computer. When the camera is connected to the USB port located on the front of the computer, the computer may not recognise the camera. Connect the camera to the USB port located on the back of the computer.