Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson
W960i XPERIA X1 Z1010 Z770i Z800i
: Usable *1: Usable, but not stable. *2: Cannot return to HFP after switching to private mode. *3: Noise may occur during a voice call *4: Cannot reject an incoming call. NG : Function available on the mobile phone but cannot be used. : Function unavailable on the mobile phone.
The following is a list of things you should know including various potential issues when using Bluetooth functions. Be sure to read it.

General

Since Bluetooth is a wireless communication, there may be cases where normal communication is not available depending on signal quality. Mobile phone models listed here have been tested and proven compatible by JVC as of Dec, 2010. If any modification has been applied to the mobile phone after our test, available functions may be different from the content listed here. Compatibility status shown above is applicable to the unit that we have used for the test. This does not guarantee that all units of the same mobile phone model will offer the same result. Some functions may require operations from the mobile phone. Refer to the mobile phone's instructions for details. Model names or model numbers are trademarks or registered trademarks of their respective holders. Connection with a PC is not supported. Depending on the setting or status of the connected mobile phone, some functions may not work properly. For example on certain mobile phones, making a call via JVC unit is possible only while the mobile phone's display is showing the standby screen. All functions related to Bluetooth depends on the version of JVC unit, the software version of the mobile phone connected with JVC head unit, and the applications installed in the mobile phone.

Pairing

The JVC unit may not be able to be located depending on the signal condition quality or mobile phone setup. While establishing Bluetooth connection with one mobile phone, a pairing with another mobile phone may fail. In this case, try again after disconnecting. The pairing and connection process depends on the mobile phone. Please check the operation of your mobile phone in advance.

Connection

If the Pairing process has been completed and you are still not able to connect, please try to connect by pushing the TEL button on the JVC unit.

Dialing, Receiving (HFP)

Noise or loud echo may occur during a voice call. On certain mobile phones, Switching Conversation on HFP (between head unit and mobile phone) may not work properly or noise may occur when switching. A JVC head unit and certain mobile phones may not always match up properly (e.g. mobile phone doesn't end the phone call even if the JVC head unit ends the display of call function, etc.). Call-waiting is not supported. Some mobile phones can not reject an incoming call because the mobile phone does not support this function.

Ring Tone in Phone

The ring tone that is heard when receiving a call may not necessarily be identical to that set on the mobile phone.

Voice Recognition

There may be cases where voices cannot be recognized easily or operation is not stable depending on the mobile phone model or environment in the car. If it is difficult to recognize your voice keyword, you can control mic input level or noise/echo cancel setting on the receiver to improve. On certain mobile phones, the status of Voice Recognition between JVC head units and mobile phones may not always match up properly.
Audio (A2DP, AVRCP) Sound may be interrupted or playback speed may vary. For example, during music streaming, the sound may be interrupted while HFP is connecting/disconnecting, or auto connect is active. Some mobile phones compatible with HFP only may stream music data. In this case, the sound quality will be low. Some mobile phones may stream the key operation sound via HFP. In this case, this sound may interrupt music streaming. When starting and ending the call, music or noise may be heard for a moment if music streaming is active in the background. During music streaming, the Key/Play Mode Controls or Displays related to AVRCP may not function as they should depending on the device. During Bluetooth audio playback, when the sound is interrupted by a call reception, call making, or voice recognition operation, playback may not resume automatically even after interruption ends. There may be cases where sound cannot be played from the JVC head unit even though the music is being played back on the mobile phone. To prevent distortion or static noise, adjust the volume level on the wirelessly connected device before use.

KD-A925BT / KD-R926BT / KD-R921BT KD-R820BT / KD-R826BT / KD-R821BT KD-R726* / KD-A725* / KD-R720* KD-R729BT / KD-R728BT / KD-R727BT / KD-R721BT * Optional USB adapter KS-BTA50 is required. Phone Function Manufacture Model Pairing/ Connect Dialing/ Receiving Apple Apple Apple Apple Blackberry Blackberry Blackberry Blackberry Blackberry Blackberry Blackberry BlackBerry Blackberry BlackBerry BlackBerry Blackberry Blackberry Blackberry BlackBerry Eten Eten HP HTC HTC HTC HTC HTC HTC HTC HTC HTC HTC HTC HTC HTC HTC HTC iPhone 2G iPhone 3G iPhone 3GS iPhone 4 7130g 8707G 9630 Bold 9000 Bold 9700 Torch 9800 Curve 8320 Curve 8330 Curve 8520 Pearl 8130 Pearl Flip 8220 Storm 9500 Storm 9550 X800 glofiish X500 iPAQ rw6828 Diamond 2 HD mini Hero Legend Nexus One Pre P3600 Shadow Touch Touch 2 Touch Cruise Touch Dual Touch HD T8285 Touch Pro Touch Pro 2 *1 *1 *1 Voice Dialing SMS/Text message receipt notification Manual Auto Streaming [A2DP] Control [AVRCP] Phonebook Function Audio Function
HTC LG LG LG LG LG LG LG LG LG LG LG LG LG LG LG LG LG Motorola Motorola Motorola Motorola Motorola Motorola Motorola Motorola Motorola Motorola Motorola Motorola Motorola Motorola Motorola Motorola Motorola Motorola Motorola Motorola Motorola Motorola Motorola Nokia Nokia Nokia Nokia Nokia
TyTN II CT810 GD510 GD880 mini GR500 GT540 GW520 GW820 HB620T KC910 KE770 KE800 Chocolate KE850 Prada KF350 Ice Cream KG290 KS20 KU970 Shine KU990 Viewty BACKFLIP ME600 E1070 KRZR K3 Milestone XT720 QA1 QA11 Q9h RAZR maxx V6 RAZR maxx V1100 RAZR V3 RAZR V3X RAZR2 V8 RAZR2 V9 RIZR Z8 ROKR E2 ROKR EM30 ROKR Z6 SLVR L72 W510 W7 XT701 ZINE ZN5 ZNclassic 2730 classic 3109 classic NG NG NG NG
Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia
3110 classic 3120 classic 3500 classic 5130 XpressMusic 5310 XpressMusic 5320 XpressMusic 5530 XpressMusic 5610 XpressMusic 5630 XpressMusic 5700 XpressMusic 5800 XpressMusic Navigator classic classic classic 6700 Slide 7210 Supernova 7900 Prism 8600 Luna 8800 arte C05-00 C06-00 E51 E52 E61i E63 E65 E66 E71 E72 E90 N70 N72 N76 NG *2 *1
Nokia Nokia Nokia Nokia Nokia Nokia O2 Palm Palm Palm Sagem Sagem Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung
N82 N86 N95 N97 N97 mini X6 XDA Stealth Centro Treo 750 Treo Pro my501X my700X A897 C3050C C5212 Galaxy S i7500 Galaxy i8000 Omnia 2 i8510 INNOV8 i8910 Omnia HD L708 M8800 S5230 S5560 Mauvel S8000 Jet S8300 Ultra touch S8500 Wave SGH-A767 SGH-A867 SGH-A877 SGH-D600 SGH-D900 SGH-D900i SGH-E950 SGH-F210 SGH-F330 SGH-F490 SGH-G800 SGH-i450 SGH-i620 SGH-i637 SGH-i780 SGH-J600 SGH-M310 SGH-M610 SGH-U100 *1 *1 *1 NG *1 *1
Samsung Samsung Samsung Samsung Samsung Samsung Samsung Siemens Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson Sony Ericsson
SGH-U700 SGH-X830 SGH-Z240 SGH-Z360 SGH-Z630 SGH-Z720 SPH-A727 SL75 C702 C902 C903 C905 D750i G502 G700 G900 J105i K530i K700i K800i K810i K850i M600i P1i U1i (Satio) S500i T303 W302 W395 W508 W580i W595 W610i W660i W760i W902 W960i Xperia X1 Xperia X2 Xperia X10 Xperia mini Z1010 Z770i Z800i *1 *1 *1 *1 *1 NG

: Usable

*1: Usable, but not stable. : Pairing is possible only with PIN (Personal Identification Number) code *2 "0000". NG : Function available on the mobile phone but cannot be used. : Function unavailable on the mobile phone.

The following is a list of things you should know including various potential issues when using Bluetooth functions. Be sure to read it.

General

Since Bluetooth is a wireless communication, there may be cases where normal communication is not available depending on signal quality. Mobile phone models listed here have been tested and proven compatible by JVC as of Feb, 2011. If any modification has been applied to the mobile phone after our test, available functions may be different from the content listed here. Compatibility status shown above is applicable to the unit that we have used for the test. This does not guarantee that all units of the same mobile phone model will offer the same result. Some functions may require operations from the mobile phone. Refer to the mobile phone's instructions for details. Model names or model numbers are trademarks or registered trademarks of their respective holders. Connection with a PC is not supported. Number of characters available for each information display depends on the JVC head units display. All characters may not be displayed in all cases. Depending on the setting or status of the connected mobile phone, some functions may not work properly. For example on certain mobile phones, making a call via JVC head unit is possible only while the mobile phone's display is showing the standby screen. All functions related to Bluetooth depends on the version of JVC head unit, the software version of the mobile phone connected with JVC head unit, and the applications installed in the mobile phone.

Pairing

A JVC head unit may not be able to be located depending on the signal condition quality or mobile phone setup. A JVC head unit may not be able to be located during while Auto Connect is enabled. In this case, try again after setting "Auto Connect" to "OFF". If the display does not show Connected, "Pairing Completed" and so on after the Pairing process is completed, Pairing has failed. If so, please retry Pairing after deleting the Pairing on both the JVC unit and the device to be connected. While establishing Bluetooth connection with one mobile phone, pairing with another mobile phone may fail. In this case, try again after disconnecting. On certain mobile phones, the PIN (Personal Identification Number) code is fixed. (e.g. "0000") The default PIN code of JVC head unit is "0000". The pairing and connection process depends on the mobile phone. Please check the operation of your mobile phone in advance. Paired device name may not display properly. Compatibility Check Mode will not work if Bluetooth connection has already been established with another mobile phone. Compatibility Check Mode only checks the connection of Bluetooth profiles, and does not guarantee all the functions of Hands-Free Call and Audio Streaming features.

Connection

There may be cases where automatic connection is not established properly even if "Auto Connect" is set to "On". In this case, try again after confirming the settings of your mobile phone or turning the power off and then turning on again for both the JVC unit and your mobile phone. On certain mobile phones, Bluetooth function may not work properly while two mobile phones are connected to Hands-Free Profile. Connection status displayed on the JVC head unit may not necessarily correspond to that of the connected mobile phone.

Dialing, Receiving (HFP)

Noise or loud echo may occur during a voice call. On certain mobile phones, Switching Conversation on HFP (between head unit and mobile phone) may not work properly or noise may occur when switching. A JVC head unit and certain mobile phones may not always match up properly (e.g. mobile phone doesn't end the phone call even if the JVC head unit ends the display of call function, etc.). On certain mobile phones, the other party's phone number and name may not be displayed properly at call reception, while talking, or while talking to a call-waiting caller. (e.g. Plus sign (+) may not be displayed depending on the mobile phone.) Call-waiting is not supported. Talking at the same time using two connected phones is not supported. Some mobile phones can not reject an incoming call because the mobile phone does not support this function.

Ring Tone in Phone

Even if "Ringing Tone" is set to "In Phone", the ring tone that is heard when receiving a call may not necessarily be identical to that set on the mobile phone.

Voice Recognition

There may be cases where voices cannot be recognized easily or operation is not stable depending on the mobile phone model or environment in the car. If it is difficult to recognize your voice keyword, you can control mic input level or noise/echo cancel setting on the receiver to improve. On certain mobile phones, the status of Voice Recognition between JVC head unit and mobile phone may not always match up properly.
Phonebook Function (OPP, PBAP)
On certain mobile phones, Phonebook and Call History may not be identical between those of the JVC head unit and mobile phone. (e.g. Plus sign (+) may not be displayed depending on the mobile phone.)
If your mobile phone supports OPP, it is capable of transferring your phonebook data from the mobile phone to JVC head unit manually. The following operations are necessary to initiate/terminate phonebook transfer: 1. Set the receiver to the transfer-wait mode (screen display example: "Ready to Receive 000/400"). 2. Use the mobile phone to transfer desired phonebook entries you desire (individual entries, groups, and/or the entire phonebook can be selected and transferred; actual operation may vary depending on the type of mobile phone used). 3. Terminate the transfer-wait mode from the receiver (when maximum memory capacity is reached, the receiver will automatically terminate the transfer-wait mode).

Before transferring phonebook data via OPP, it is necessary to delete pairing on both some mobile phones and the JVC head unit. Text characters of phone numbers that can be recognized a JVC head unit are numerals 0 to 9, + (plus), (asterisk), a to d, A to D and # (pound) signs. Unrecognizable characters will be skipped; make sure the correct number has been displayed before making a call from the phonebook. Even if your mobile phone supports PBAP, it may be not available to access the phonebook/call history data memorized in your mobile phone or SIM card depending on your mobile phone's specification. Additionally, after HFP connection is established between JVC head unit and your mobile phone, it will require time to allow phonebook/call history data browsing on the JVC head unit automatically (depending on your mobile phone and the number of phonebook/call history.) International call may not be done from phonebook/call history of JVC head unit.
SMS (Short Message Service) or Text Message Receipt Notification
Depending on the mobile phone, notification may not reach the JVC head unit.
Battery remainder/ Signal strength indication
Signal strength indication and battery remainder indication do not necessarily correspond to those on the mobile phone. JVC head unit is not compatible with Bluetooth audio players' signal strength and/or battery remainder indications.

Audio (A2DP, AVRCP)

Sound may be interrupted or playback speed may vary. For example, during music streaming, the sound may be interrupted while HFP is connecting/disconnecting, or auto connect is active. Some mobile phones compatible with HFP only may stream music data. In this case, the sound quality will be low. Some mobile phones may stream the key operation sound via HFP. In this case, this sound may interrupts music streaming. When starting and ending the call, music or noise may be heard for a moment if music streaming is active in the background. During music streaming, the Key/Play Mode Controls or Displays related to AVRCP may not function as they should depending on the device. During Bluetooth audio playback, when the sound is interrupted by a call reception, call making, or voice recognition operation, playback may not resume automatically even after interruption ends. There may be cases where sound cannot be played from the JVC head unit even though the music is being played back on the mobile phone. To prevent distortion or static noise, adjust the volume level on the wirelessly connected device before use.