LE22S8

Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country AUSTRIA FINLAND FRANCE GERMANY HUNGARY ITALIA NETHERLANDS POLAND PORTUGAL SPAIN UNITED KINGDOM
Customer Care Centre 800-112233 0771-400002 0825-022062 01805-471101 0640-985985 800-194194 015-2197000 0-801-B2BSAM (222726) 808-B2BSAM 0902024-010 0870-2416893

installation manual

LCD TV
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/global/register

Model Serial No.

BN68-01569H-00

01569H-00L07-0523.indb 1

2008-05-23 5:14:24
Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. o not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. D This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. isplaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. D To prevent this effect, reduce the brightness and contrast when displaying still images. 2008 Samsung Electronics Co., Ltd. All rights reserved.

01569H-00L07-0523.indb 2

English

Contents

CONNECTING AND PREPARING YOUR TV

List of Parts2

Installing the Stand2
Installing the Wall Mount Kit2
Viewing the Control Panel3
Viewing the Connection Panel4
Viewing the Remote Control 6

Symbol

English - 1

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

M4 X L16

Data Cable
Power Cord Owners Instructions

Stand Screw X4

Stand Safety Guide
Remote Control & Batteries (AAA x 2)
The stand and stand screw may not be included depending on the model.

Installing the Stand

1. Connect your LCD TV and the stand. Two or more people should carry the TV. Make sure to distinguish between the front and back of the stand when assembling them. 2. Fasten two screws at position 1 and then fasten two screw at position 2. Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one side. The stand is installed for models with the screen size of 37 inch and above.
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own. Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

Remove the stand and cover the bottom hole with a cap and fasten with two screws.

English -

2008-05-23 5:14:25
Viewing the Control Panel
The product colour and shape may vary depending on the model. 1 SOURCE Toggles between all the available input sources (TV, Ext., AV, S-Video, Component, PC, HDMI). In the on-screen menu, use this button as you use the ENTER button on the remote control. 4
2 MENU Press to see an on-screen menu of your TVs 5 features. Press to decrease or increase the volume. In the on-screen menu, use the buttons as you use the and buttons on the remote control.
Press to change channels. In the on-screen menu, use the buttons as you use the and buttons on the remote control. (Without the Remote Control, you can turn on the TV by using the Channel buttons.) Speakers (Power) Press to turn the TV on and off. Power Indicator Blinks and turns off when the power is on and lights up in stand-by mode. Remote Control Sensor Aim the remote control towards this spot on the TV.

01569H-00L07-0523.indb 3

Viewing the Connection Panel
HDMI/DVI IN AUDIO DVI IN AUDIO

COMPONENT IN

VIDEO AV IN

S-VIDEO

Power Input
The product colour and shape may vary depending on the model. Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable.
1 Connecting Set-Top Box, VCR or DVD
Connector EXT Input Video o Audio (L/R) o RGB o Output Video + Audio (L/R) Only TV output is available
- Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
2DATA - Used to support data communication between the TV and the SBB. - The TV jack type is RJ-12. 3 HDMI / DVI IN [R-AUDIO-L] - Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players) - No additional Audio connection is needed for an HDMI to HDMI connection. - When using an HDMI/DVI cable connection, you must use the HDMI IN / DVI IN jack. What is HDMI? - High Definition Multimedia interface allows the transmission of high definition digital video data and multiple channels of digital audio. - The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio. 4PC IN [PC] / [AUDIO] - Connect to the video and audio output jack on your PC.

01569H-00L07-0523.indb 4

2008-05-23 5:14:26
5 ANT IN view television channels correctly, a signal must be received by the set from one of the following To sources: - An outdoor aerial / A cable television network / A satellite network 6Headphones jack H - eadphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled. 7 Connecting External A/V Devices - Connect RCA or S-Video cable to an appropriate external A/V device such as VCR, DVD or Camcorder. - Connect RCA audio cables to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio out connectors on the A/V device. 8 SERVICE - Service connection for qualified service engineer. 9 COMPONENT IN - Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DVD. - If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the DVD to component connector ("PR", "PB", "Y") on your set. - The PR, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr. - Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio out connectors on the DVD. 0Kensington Lock (depending on the model) - The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. - If you want to use a locking device, contact the dealer where you purchased the TV. - The location of the kensington Lock may be different depending on its model.

LCD TV

LE22S8
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country REPUBLIC OF IRELAND U.K Customer Care Centre 100 0870-SAMSUNG(726-7864) Web Site www.samsung.com/ie www.samsung.com/uk

Owners Instructions

Before operating the unit, please read this manual thoroughly, and retain it for future reference.
ON-SCREEN MENUS PC DISPLAY PICTURE IN PICTURE (PIP) TELETEXT

BN68-01182K-00

Register your product at www.samsung.com/global/register Record your Model and Serial number here for future reference. Model _______________ Serial No. _______________
BN68-01182K-00Eng-Cover.indd 1

2007-08-14 1:39:12

Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen. WARNINGS:
Image retention, commonly known as screen burn-in, can occur on most types of television if the same image is displayed continuously. The most common causes of image retention are logos that remain stationary on the TV screen. These logos are common on many programmes received via a Setop Box. To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast settings to decrease the intensity of the picture. Extended viewing of movies and programs in aspect ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour to avoid black borders top or bottom by using the zoom function. This will help eliminate the black borders and fit the picture to the entire area of the screen. Using a video game console may cause image retention and is not recommended. When using a PC input, avoid displaying still images for long durations and reduce the brightness or contrast settings to decrease the intensity of the picture. IMPORTANT: Image retention issues are not covered by your Samsung warranty.
not display a still image on the LCD panel for more than 2 hours as it can cause screen image Do retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. W atching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the brightness and contrast when displaying still images. 2007 Samsung Electronics Co., Ltd. All rights reserved.
BN68-01182K-X0Eng-0726.indd 1

2007-08-14 1:58:04

Contents
Connecting and Preparing Your TV
List of Parts... 3 Installing the Stand.. 3 Installing the Wall Mount Kit.. 3. Viewing the Control Panel.. 4 Viewing the Connection Panel.. 5 Viewing the Remote Control.. 7 Installing Batteries in the Remote Control. 8 Switching On and Off... 8 Placing Your Television in Standby Mode.. 8 Plug & Play... 9

Setting the Sound

Changing the Sound Standard. 22 Adjusting the Sound Settings. 23. Setting the TruSurround XT (SRS TS XT). 23 Connecting Headphones.. 24 Selecting the Sound Mode.. 24. Adjusting the Volume Automatically.. 24 Selecting the Internal Mute.. 25 Listening to the Sound of the Sub Picture. 25 Resetting the Sound Settings to the Factory Defaults.. 26.

Setting the Channels

Storing Channels Automatically.. 10 Storing Channels Manually.11 Setting the Channel Lists.. 12 Activating the Child Lock.. 12 Sorting the Stored Channels.. 13. Assigning Channels Names.. 13. Fine Tuning Channel Reception.. 14

Mode : Movie Contrast 80 Brightness 45 Sharpness 10 Colour 53 Tint G 50 R 50 Colour Tone : Warm2 Detailed Settings Backlight :5 Size : Auto Wide Screen Mode : 16 : 9 More

Detailed Settings

Black Adjust : Off Dynamic Contrast : Off Gamma : 0 White Balance My Colour Control Edge Enhancement : Off Colour Space : Auto
Edge Enhancement: Off/On You can emphasize object boundaries. Colour Space: Auto/Wide You can set the colour reproduction space for the input signal to Auto or Wide.

English - 17

BN68-01182K-X0Eng-0726.indd 17

2007-08-14 1:58:13

Changing the Picture Size
You can select the picture size which best corresponds to your viewing requirements. 1. Press the MENU button to display the menu. Press the ENTER/OK button, to select "Picture". 2. Press the or button to select "Size", then press the ENTER/OK button. 3. Select the required option by pressing the or button. Press the ENTER/OK button. 4. Press the EXIT button to exit. uto Wide: utomatically adjusts the picture size to the "16:9" A A aspect ratio. ide: djusts the picture size to 16:10 appropriate for DVDs or W A wide broadcasting. 16:9: djusts the picture size to 16:9 appropriate for DVDs or A wide broadcasting. Wide Zoom: Magnify the size of the picture more than 4:3. oom: agnifies the 16:9 wide picture (in the vertical direction) Z M to fit the screen size. 4:3: his is the default setting for a video movie or normal T broadcasting. ust Scan: isplays the input scenes as they are without any J D cutoff when HDMI 720p,1080i signals are input. Auto Wide" function is available only in "TV", "Ext.", "AV", " "S-Video" and "DTV" mode. In PC Mode, only "Wide" and "4:3" mode can be adjusted. Zoom : elect S by pressing the or button. Use the or button to move the picture up and down. After selecting , use the or button to magnify or reduce the picture size in the vertical direction. Wide Zoom : ove the screen up/down using the or M buttons after selecting the by pressing the or ENTER/OK button.

DNIeTM (Digital Natural Image engine) This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes. This function is not available in PC mode. This function is not available in Movie mode.

English - 20

BN68-01182K-X0Eng-0726.indd 20
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture. 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER/OK button. 2. Press the or button to select "PIP", then press the ENTER/OK button. 3. Press the ENTER/OK button again. Press the or button to select "On", then press ENTER/OK button. 4. Press the or button to select "Source",then press ENTER/OK button. Select a source of the sub picture by pressing the or button and press the ENTER/OK button. The sub picture can serve different source selections based on what the main picture is set to. Main picture Component HDMI PC Sub picture Analog TV broadcasts Ext AV
Press the PIP button on the remote control repeatedly to activate or deactivate the "PIP".
TV TV Mode :Custom Setup Equalizer Plug & Play SRS TS XT :Off Language :English Time Auto Volume :Off Game Mode :Off Internal Mute :Off Blue Screen :Off Reset Melody :Medium
PC Home Theatre PC :Off Energy Saving :Off HDMI Black Level :Low PIP Move Enter

Return

Mode :Custom PIP Equalizer PIP : On SRS TS XT :Off Source : TV Position : Auto Volume :Off Programme : P 1 Internal Mute :Off Reset

Move

5. Press the or button to select "Position", then press the ENTER/OK button. Select the position of the sub picture by pressing the or button and then press the ENTER/OK button. 6. Press the or button to select "Programme" and then press the ENTER/OK button. You can select the channel that you want to view through sub picture by pressing the or button. Press the ENTER/OK button. The "Programme" can be active when the sub picture is set to TV. 7. Press the EXIT button to exit. You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. Source: Used to select a source of the sub picture. Position: Used to move the sub picture. Programme: Used to Change the sub picture.

TV TV Sound

Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off Internal Mute : Off Off On Sound Select : Reset
Listening to the Sound of the Sub Picture
During the PIP features activation, you can listen to the sound of the sub picture. 1. Press the MENU button to display the menu. Press the or button to select "Sound", then press the ENTER/OK button. 2. Press the or button to select "Sound Select", then press the ENTER/OK button. 3. Press the or button to select "Sub". Press the ENTER/OK button. 4. Press the EXIT button to exit. Main : Used to listen to the sound of the main picture. Sub : Used to listen to the sound of the sub picture. You can select this option when the PIP is set to On.
Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off Internal Mute : Off Main Sound Select : Main Sub Reset

English - 25

BN68-01182K-X0Eng-0726.indd 25

2007-08-14 1:58:20

Resetting the Sound Settings to the Factory Defaults
If "Game Mode" is On, the Reset Sound function is activated (Refer to page 28). Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults. 1. Press the MENU button to display the menu. Press the or button to select "Sound", then press the ENTER/OK button. 2. Press the or button to select "Reset", then press the ENTER/OK button. 3. Press the EXIT button to exit. You can select this option when the "Game Mode" is set to "On".

TV Sound

Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off Internal Mute : Off Sound Select : Main Reset
Setting and Displaying the Current Time
You can set the TVs clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers. 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER/OK button. 2. Press the or button to select "Time", then press the ENTER/OK button. 3. Press the ENTER/OK button to select "Clock Set". 4. To. Move to "Month", "Day", "Year", "Hour "or "Minute" Set the "Month", "Day", "Year", "Hour "or "Minute" Confirm the setting 5. Press the EXIT button to exit. If you disconnect the power cord, you have to set the clock again. You can also set "Year", "Month", "Day", "Hour" and "Minute" by pressing the number buttons on the remote control. Press the. or button. or button. ENTER/OK button.

Editing the Input Source Names
Name the device connected to the input jacks to make your input source selection easier. 1. Press the MENU button to display the menu. Press the or button to select "Input", then press the ENTER/OK button. 2. Press the or button to select "Edit Name", then press the ENTER/OK button. 3. 4. Press the or button to select the device that you wish to edit. Press the ENTER/OK button. Press the or button to select the required device. Press the ENTER/OK button.
Mode :Custom Input Equalizer Source List : TV SRS TS XT :Off Edit Name Auto Volume :Off Internal Mute :Off Reset
Mode :Custom Edit Name Equalizer Ext. : ---SRS :Off AV TS XT : VCR S-Video : DVD Auto Volume :Off D-VHS Component : Internal Mute :Off PC : Cable STB Reset HDMI : HD STB
Satellite STB AV Receiver q

English - 30

BN68-01182K-X0Eng-0726.indd 30

2007-08-14 1:58:26

Previewing the DTV Menu System
he company does not guarantee the normal operation T of the DTV menu for countries other than the 6 supported countries (United Kingdom, Germany, France, Italy, Spain, Austria) because only these country standards are supported. In addition, when the country of the broadcast stream differs from the country selected by the current user, the string appearing in the channel banner, Info, Guide, Channel Manager, etc. may not be displayed properly. Available in DTV mode. Preset to the DTV mode by using the TV/DTV button on your remote control. To help you navigate around the on-screen menu system and adjust the various settings available, refer to the following illustration. Press the D.MENU button. Guide Now & Next Guide Full Guide Scheduled List Default Guide
Mode :Custom Guide Equalizer Now TS XT Guide SRS & Next :Off Full Guide Auto Volume :Off Scheduled List Internal Mute :Off Default Reset Guide :Full Guide
Channel Country :Others Auto Store Manual Store Edit Favourite Channels Channel List Move

Now/Next, Full Guide

Channel Country Auto Store Manual Store Edit Favourite Channels Channel List All, Favourites, Default Setup Menu Transparency Change PIN Parental Lock Subtitle Subtitle Mode Audio Format Digital Text Time Zone System
Setup Menu Transparency :Medium Change PIN Parental Lock Subtitle :On Subtitle Mode : Normal Move
Language Audio Language Subtitle Language Teletext Language Preference
High, Medium, Low, Opaque

Move Enter

Off, On Normal, Hard of hearing PCM, Dolby Digital Disable, Enable Product Information Signal Information Software Upgrade Common Interface Reset Primary Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Primary Teletext Language Secondary Teletext Language

You can select these options by simply pressing the D.MENU button on the remote control.
Language Audio Language Subtitle Language Teletext Language Preference
The sub-items of the CI Menu may vary depending on the CAM model.

English - 31

BN68-01182K-X0Eng-0726.indd 31

2007-08-14 1:58:27

Updating the Channel List Automatically
You can update the channel list when the broadcaster adds new Services or if you move the TV to a new location. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Channel", then press the ENTER/OK button. 3. Press the ENTER/OK button again, to select "Country". 4. Select the appropriate country by pressing the or button. Press the ENTER/OK button to confirm your choice. ven though you have changed the country setting E in this menu, the country setting for Analog TV is not changed.(Refer to page 10)
Mode :Custom Auto Store Equalizer SRS TS XT :Off Auto Volume :Off Scanning for digital services. Internal Mute :Off 35% Reset Services found: 24 Channel: 38 Move
5. Press the or button to select "Auto Store", then press the ENTER/OK button. hen it has finished, the number of scanned services W will be displayed.

Stop Enter

he existing favourite channel list will not be deleted when the channel list is updated. T o stop the scan before it has finished, press the ENTER/OK button with "STOP" T selected. f the signal status is poor, the "No Service found! Check the aerial connection" message I is displayed.
6. Press the EXIT button to exit.
Updating the Channel List Manually
You can specify the channel for a fast channel search. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Channel", then press the ENTER/OK button. 3. Press the or button to select "Manual Store", then press the ENTER/OK button. 4. Press the or button to select "Channel", then press the ENTER/OK button.

Channel 65

Manual Store
Frequency 474000 KHz Bandwidth 8 MHz

Search Adjust Return

Channel: Channel "5" to "69" in sequence are displayed (depending on the country) Frequency: The frequency available in the Channel group is displayed. Bandwidth: The available bandwidths are 7 and 8 MHz.
5. When it has finished, the number of scanned services will be displayed. 6. Press the EXIT button to exit.

English - 32

BN68-01182K-X0Eng-0726.indd 32

2007-08-14 1:58:28

Editing Your Favourite Channels
You can edit your favourite channels using the four colour buttons. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Channel", then press the ENTER/OK button. 3. Press the or button to select "Edit Favourite Channels", then press the ENTER/OK button. 4. Press the red button to display all currently stored channels. 5. Press the or button to select a channel you want. Press the ENTER/OK button. A "" icon is shown next to the selected channel and the channel will be added to the favourite channel list. To undo, press the ENTER/OK button again. Select All: Select all channels currently displayed. Select None: Deselect all selected channels. Preview: Displays (a) currently selected channel(s). The Favorite Channels settings have been completed. 6. Press the EXIT button to exit. Add You can use this function when one or more favourite channels have been selected. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Channel", then press the ENTER/OK button. 3. Press the or button to select "Edit Favourite Channels", then press the ENTER/OK button. 4. Press the red button in the "Edit Favourite Channels" menu. To add more channels, refer to the step 5 on the previous description. 5. If you want to check the channel to be stored, press RETURN button. Press the EXIT button to exit. To add all channels to the favourite channel list, press the red button. To remove all channels, press the green button. Preview : Displays (a) currently selected channel(s). Press the CH LIST button to display the favourite channel manager.

Edit Favourite Channels (no Channels)

Move Enter Add Channels

Edit Favourite Channels 6 BBC TWO Five BBC THREE abc1 QVC Move

Select All

Select None

Preview

Select
Edit Favourite Channels 4 BBC TWO BBC THREE abc1

Move Add

Renumber
Enter PreviewReturn Delete
Edit Favourite Channels 6 BBC TWO Five BBC THREE abc1 QVC Move Select All

Enter Select None

Return Preview

English - 33

BN68-01182K-X0Eng-0726.indd 33

2007-08-14 1:58:30

Renumber (depending on the country) 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Channel", then press the ENTER/OK button. 3. Press the or button to select "Edit Favourite Channels", then press the ENTER/OK button. 4. Select the required channel using the or button. 5. Press the green button. The space for entering the number is a blank. 6. nter the new channel number. Press ENTER/OK button to E store or RETURN button to cancel. Press the button to delete an entered digit. If you enter a number already assigned to another channel, the number is assigned to the selected channel and the previous number assigned to the selected channel is assigned to the other channel. That is, the two numbers are exchanged. T he favorite channels are automatically sorted in ascending order of channel numbers. 7. Press the EXIT button to exit.
Edit Favourite Channels 1 _ _ _ 4 BBC TWO BBC THREE abc1

Confirm

Preview 1. In the "Edit Favourite Channels" menu, select the channel to be previewed by pressing the or button. 2. Press the yellow button. The selected channel is displayed on the screen.
EnterPreview Return Delete
Delete 1. In the "Edit Favourite Channels" menu, select the channel to be deleted from the favourite channels list by pressing the or button. 2. Press the blue button. The selected channel and number will be deleted. To add a deleted channel back in to the favourite channel list, see "Add" on page 33.
Edit Favourite Channels BBC TWO BBC THREE

English - 34

BN68-01182K-X0Eng-0726.indd 34

2007-08-14 1:58:31

Selecting Channel List
You can exclude the channels you have chosen from the Channel List All Channels-All Test Card M' channels you have scanned.When you scan through the 1/bid-up.tv 60 Television X 1 Test Card M' stored channels, those you have chosen to skip are not 25 TCM 70 BBC Radio Vida003b displayed. All channels that you do not specifically choose to 26 UKTV Style 72 BBC Radio Vida004b 27 Discovery 73 BBC Radio vida005b skip are displayed during scanning. 28 DiscoveryH&L 74 BBC Radio vida006b 15 Cartoon Nwk 84 heat 15 Ch Boomerang 91 MOJO 16 QVC 1. Press the D.MENU button to display the DTV menu. 55 Ttext Holidays 800 ARD-MHP-Data 17 UKTV Gold 6 More 2. Press the or button to select "Channel", then press the Previous Page NextPage Favourites TV ENTER/OK button. Move Watch Return 3. Press the or button to select "Channel List". Press the ENTER/OK button. 4. Press the or button to select "All", "Favourites" or "Default". Press the ENTER/OK button. 5. Press the yellow button to toggle between your favourite channels and all channels. Your favourite channels are only displayed if they were previously set in the "Editing Your Favourite Channels" menu (refer to page 33). 6. Press the red or green button to display the previous or next channel List page. 7. Press the or button to select a channel to be tuned. Press the ENTER/OK button. The channel number, name and an icon are displayed in the top left corner while changing the channel. The channel number and name are displayed if the channel is one of the all channels, and a icon if the channel is one of the favourite channels. 8. Press the blue button to toggle between your TV, Radio, Data/Other and All. 9. Press the CH LIST button to exit from the channel List

English - 40

BN68-01182K-X0Eng-0726.indd 40

2007-08-14 1:58:36

Selecting the Digital Text
If the programme is broadcast with digital text, this feature is Setup enabled. Audio Format : PCM 1. Press the D.MENU button to display the DTV menu. Digital Text : Enable Disable Time Zone Enable 2. Press the or button to select "Setup", then press the System ENTER/OK button. 3. Press the or button to select "Digital Text", then press the ENTER/OK button. Move Enter Return 4. Press the or button to select "Disable" or "Enable". Press the ENTER/OK button. 5. Press the EXIT button to exit. MHEG(Multimedia and Hypermedia Information Coding Experts Group) An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system which includes data-linking hypermedia such as still images, character service, animation, graphic and video files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various fields including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing, digital libraries and network games.
Selecting the Time Zone (Spain only)
Select the time zone where locate 1. Press the D.MENU button. 2. 3. 4. Press the or button to select "Setup", then press the ENTER/OK button. Press the or button to select "Time Zone", then press the ENTER/OK button. Select the time zone where you locate by pressing the or button. Press the ENTER/OK button. The following options are available The Iberian Peninsula and Balears Islands Canarian Islands 5. Press the EXIT button to exit.
Setup Audio Format : PCM Digital Text : Enable Time Zone System

Time Zone

The Iberian Peninsula and Balears Islands Canarian Islands
Viewing Product Information
You can view your product information. For service or repair, please contact a Samsung approved dealer. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Setup", then press the ENTER/OK button. 3. Press the or button to select "System", then press the ENTER/OK button. 4. Press the ENTER/OK button again, to select "Product Information". The Product Information menu is selected. - Software Version, Firmware Version 5. Press the EXIT button to exit.

2007-08-14 1:58:38

Viewing Common Interface
This contains information on CAM inserted in the CI slot and displays it. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Setup", then press the ENTER/OK button. 3. Press the or button to select "System", then press the ENTER/OK button. 4. Press the or button to select "Common Interface", then press the ENTER/OK button. 5. Press the ENTER/OK button to display the information for your application. 6. Press the EXIT button to exit. The Application Info inserting is about the CI CARD. You can install the CAM anytime whether the TV is ON or OFF. 1.Purchase the CI CAM module by visiting your nearest dealer or by phone. 2.Insert the CI CARD into the CAM in the direction of the arrow until it fits. 3.Insert the CAM with the CI CARD installed into the common interface slot. (Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.) 4. Check if you can see a picture on a scrambled signal channel.

Application Info

Type : CA Manufacturer : Channel Plus Info : Top Up TV
Selecting the CI (Common Interface) Menu
This enables the user to select from the CAM-provided menu. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Setup", then press the ENTER/OK button. 3. Press the or button to select "System", then press the ENTER/OK button. 4. Press the or button to select "Common Interface", then press the ENTER/OK button. 5. Select to "CI Menu" by pressing the or button and press the ENTER/OK button. 6. Select the required option by pressing the or button, and press the ENTER/OK button. 7. Press the EXIT button to exit. Select the CI Menu based on the menu PC Card.

CI Menu

Main menu Module information Smart card information Language Software Download Press OK to select or Exit to quit Move Enter Exit

English - 43

BN68-01182K-X0Eng-0726.indd 43

2007-08-14 1:58:39

Resetting
You can reset the values stored to the factory default values. The Reset operation deletes all channel information and user preferences returning all values to their default factory state. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Setup", then press the ENTER/OK button. 3. Press the or button to select "System", then press the ENTER/OK button. 4. Press the or button to select "Reset", then press the ENTER/OK button. 5. The "Enter PIN" screen will appear. 6. Enter your current 4-digit PIN code by using the numeric buttons (0~9). The warning message is displayed.All values will be reset by pressing the coloured buttons (red, green, yellow and blue)in turn. 7. Press the EXIT button to exit.

Reset Enter PIN

WARNING: All channel settings and user preferences will be lost and returned to the factory defaults. It is recommended that a reset is performed only when serious problems are experienced.
Selecting the Preferred Language (Subtitle, Audio or Teletext)
You can change the default value for subtitle, audio teletext languages. Displays the language information for the incoming stream. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Language", then press the ENTER/OK button. 3. Press the or button to select "Audio Language", "Subtitle Language" or "Teletext Language". Press the ENTER/OK button. 4. Select a particular language by pressing the or button repeatedly. Press the ENTER/OK button. English is the default in cases where the selected language is unavailable in the broadcast. 5. Press the EXIT button to exit. While viewing a programme, the subtitle can be selected. While viewing a programme, audio languages can be selected.

English - 44

BN68-01182K-X0Eng-0726.indd 44

2007-08-14 1:58:40

Preference

This menu consists of 6 sub-menus: Primary Subtitle Language, Secondary Subtitle Language, Primary Audio Language, Secondary Audio Language, Primary Teletext Language and Secondary Teletext Language. Using this feature, users can select one of the languages (English, German, Italian, Swedish, French, Welsh, Gaelic, Irish, Danish, Finnish, Norwegian, Spanish, Czech and Greek). The language selected here is the default when the user selects a channel.
Language Audio Language Subtitle Language Teletext Language Preference Move
Press the or button to select required menu (Primary Subtitle Language, Secondary Subtitle Language, Primary Audio Language, Secondary Audio Language, Primary Teletext Language or Secondary Teletext Language), then press the ENTER/OK button. The options of the selected menu are displayed. Press the or button to select required option (English, German, Italian, Swedish, French, Welsh, Gaelic, Irish, Danish, Finnish, Norwegian, Spanish, Czech or Greek), then press the ENTER/OK button. you change the language setting, the Subtitle Language, Audio Language and the Teletext If Language of the Language menu (refer to page 44) are automatically changed to the selected language. he Subtitle Language, Audio Language and the Teletext Language of the Language menu show T a list of languages supported by the current channel and the selection is highlighted. If you change this language setting, the new selection is only valid for the current channel. The changed setting does not change the setting of the Primary Subtitle Language, Primary Audio Language or the Primary Teletext Language of the Preference menu.

English - 45

BN68-01182K-X0Eng-0726.indd 45

Teletext Feature

Most television stations provide written information services via teletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons. teletext information to be displayed correctly, channel For reception must be stable. Otherwise, information may be missing or some pages may not be displayed. 1 TV/DTV Exit from the teletext display. 2 (index) Used to display the index (contents) page at any time while you are viewing teletext. 3 (teletext on/mix) Press to activate teletext mode after selecting the channel providing the teletext service. Press it twice to overlap the teletext with the current broadcasting screen. 4 (size) Press to display the double-size letters in the upper half of the screen. For lower half of the screen, press it again. To display normal screen, press it once again. 5 (mode) Press to select the teletext mode (LIST/FLOF). If you press it in the LIST mode, it switches into the List save mode. In the List save mode, you can save teletext page into list using the (store) button. 6 (sub-page) Used to display the available sub-page. 7 (page up) Used to display the next teletext page. 8 (page down) Used to display the previous teletext page. 9 (cancel) Used to display the broadcast when searching for a page. 0 (reveal) Used to display the hidden text (answers to quiz games, for example). To display normal screen, press it again. ! Coloured buttons (red/green/yellow/blue) the FASTEXT system is used by a broadcasting company, the different topics covered on a If teletext page are colour-coded and can be selected by pressing the coloured buttons. Press one of them corresponding to the required. The page is displayed with other coloured information that can be selected in the same way. To display the previous or next page, press the corresponding coloured button. @ (hold) Used to hold the display on a given page if the selected page is linked with several secondary pages which follow on automatically. To resume, press it again. # (store) Used to store the teletext pages. You can change teletext pages by pressing the numeric buttons on the remote control.

English - 46

BN68-01182K-X0Eng-0726.indd 46

2007-08-14 1:58:41

The teletext pages are organized according to six categories: Part A B C D E F Contents Selected page number. Broadcasting channel identity. Current page number or search indications. Date and time. Text. Status information. FASTEXT information.
Teletext information is often divided between several pages displayed in sequence, which can be accessed by: Entering the page number Selecting a title in a list Selecting a coloured heading (FASTEXT system) Press the TV/DTV button to exit from the teletext display.
Setting Up Your Remote Control
After it has been set up properly, your remote control can operate in five different modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding button on the remote control allows you to switch between these modes and control whichever piece of equipment you choose. The remote control might not be compatible with all DVD Players, VCRs, Cable boxes and Set-Top Boxes. Setting Up the Remote to Operate Your VCR, CABLE, DVD and STB 1. Turn off your VCR, CABLE, DVD and STB. 2. Press the VCR, CABLE, DVD and STB button on your TVs remote control. 3. Press the SET button on your TVs remote control. 4. Using the number buttons on your remote control, enter three digits of the VCR code listed on pages 48~50 of this manual for your brand of VCR. Make sure you enter three digits of the code, even if the first digit is a "0". (If more than one code is listed, try the first one.) 5. Press the POWER button on the remote control. Your VCR should turn on if your remote is set up correctly. your VCR does not turn on after set up, repeat steps 2, 3 and 4, but try If one of the other codes listed for your brand of VCR. If no other codes are listed, try each VCR code, 000 through 080.

English - 47

BN68-01182K-X0Eng-0726.indd 47

Remote Control Codes

Brand SAMSUNG ADMIRAL AIWA AKAI AUDIO DYNAMICS BELL&HOWELL BROKSONIC CANDLE CANON CITIZEN COLORTYME CRAIG CURTIS MATHES DAEWOO DB DIMENSIA DYNATECH ELECTROHOME EMERSON FISHER FUNAI GENERAL ELECTRIC GO VIDEO HARMAN KARDON HITACHI INSTANT REPLAY JC PENNEY JCL JVC KENWOOD KLH KONIA LG(Goldstar) LIOYD LOGIK LXI MAGNAVOX MARANTZ MARTA MEI MEMOREX MGA MIDLAND MINOLTA MITSUBISHI Code Brand MONTGOMERY WARD MTC MULTITECH NEC OPTIMUS ORION PANASONIC PENTAX PENTEX RESEARCH+ PHILCO PHILIPS PIONEER PORTLAND PROSCAN QUARTZ QUASAR RADIO SHACK/ REALISTIC RCA SANSUI SANYO SCOTT SEARS SHARP SHIMTOM SIGNATURE SONY SYLVANIA SYMPHONIC TANDY TASHIKA TATUNG TEAC TECHNICS TEKNIKA TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC WARDS YAMAHA ZENITH Code 006

072 075

049 055

WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
BN68-01182K-X0Eng-0726.indd 56
Wiring the Mains Power Supply Plug (UK Only)
IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitabl y approved extension lead or consult your dealer for assistance. However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. IMPORTANT The wires in the mains lead are coloured in accordance with the following code: BLUE - NEUTRAL BROWN - LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows : The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED. WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.

Warranty Card

United Kingdom
This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned. In case of difficulty, details of our Authorised Service Centres are available from:
Samsung Electronics U.K. Ltd. Customer Care Centre PO Box 17243 Edinburgh, EH11 4YB United Kingdom Tel: 0870 SAMSUNG (7267864)(UK & Northern Ireland) Tel: 100 (Republic of Ireland Only) Fax: +44 (0)Web : www.samsung.com/uk
WARRANTY CONDITIONS 1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and is presented with the original invoice or sales slip or confirmation, and the serial number on the product has not been defaced. 2. Samsungs obligations are limited to the repair or, at its discretion, replacement of the product or the defective part. 3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres. No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such repair work will not be covered by this warranty. 4. This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to conform to national or local technical or safety standards in force in any Country other than the one for which the product was originally designed and manufactured.