LE23R8 LE26R8

Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country REPUBLIC OF IRELAND U.K Customer Care Centre SAMSUNG (7267864) Web Site www.samsung.com/uk www.samsung.com/uk

LCD TV

Owners Instructions
Before operating the unit, please read this manual thoroughly, and retain it for future reference.
ON-SCREEN MENUS PC DISPLAY PICTURE IN PICTURE (PIP) TELETEXT

BN68-01169E-01

Register your product at www.samsung.com/global/register Record your Model and Serial number here for future reference. Model _______________ Serial No. _______________
BN68-01169E-01Eng-Cover.indd 1

2007-03-12 4:12:45

Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen. WARNINGS:
Image retention, commonly known as screen burn-in, can occur on most types of television if the same image is displayed continuously. The most common causes of image retention are logos that remain stationary on the TV screen. These logos are common on many programmes received via a Setop Box. To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast settings to decrease the intensity of the picture. Extended viewing of movies and programs in aspect ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour to avoid black borders top or bottom by using the zoom function. This will help eliminate the black borders and fit the picture to the entire area of the screen. Using a video game console may cause image retention and is not recommended. When using a PC input, avoid displaying still images for long durations and reduce the brightness or contrast settings to decrease the intensity of the picture. IMPORTANT: Image retention issues are not covered by your Samsung warranty.
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the brightness and contrast when displaying still images. 2007 Samsung Electronics Co., Ltd. All rights reserved.
BN68-01169E-Eng-0312.indd 1

2007-03-12 4:33:08

Contents
Connecting and Preparing Your TV
List of Parts.. 3 Installing the Stand.. 3 . Installing the Wall Mount Kit.. 3 Viewing the Control Panel.. 4 Viewing the Connection Panel.. 5 Viewing the Remote Control. 7 Installing Batteries in the Remote Control. 8 Switching On and Off.. 8 Placing Your Television in Standby Mode. 8 Plug & Play... 9 .

Setting the Sound

Changing the Sound Standard. 22 Adjusting the Sound Settings.. 23 Setting the TruSurround XT (SRS TS XT). 23 . Connecting Headphones.. 24 . Selecting the Sound Mode.. 24 Adjusting the Volume Automatically. 24 Selecting the Internal Mute. 25 Listening to the Sound of the Sub Picture. 25 Resetting the Sound Settings to the Factory Defaults... 26

Setting the Channels

Storing Channels Automatically. 10 Storing Channels Manually..11 Setting the Channel Lists.. 12 Activating the Child Lock.. 12 Sorting the Stored Channels.. 13 Assigning Channels Names.. 13 Fine Tuning Channel Reception. 14 LNA (Low Noise Amplifier).. 14

Setting the Time

Setting and Displaying the Current Time. 26 . Setting the Sleep Timer.. 27 Switching the Television On and Off Automatically... 27

Start Plug & Play. OK EnterExit
7. The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER/OK button. The channel search will start and end automatically. The DTV channel scan menu appears and the DTV channel is automatically updated. If the DTV channel is updated, the Source in the source list of the Input menu is automatically changed to DTV. After all the available channels are stored, the "Clock Set" menu appears. Press the ENTER/OK button at any time to interrupt the memorization process. For detailed descriptions about DTV channel update, refer to page 33 of this manual. After all the available digital channels are stored, the screen to select a time zone is displayed depending on the country. 8. Press the ENTER/OK button. Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the or buttons. Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the or buttons. You can also set the hour and minute by pressing the number buttons on the remote control. 9. Press the ENTER/OK button to confirm your setting. Language: Select your language. Country: Select your country. Auto Store: Automatically scans for and stores channels available in the local area. Clock Set: Sets the current time for the TV clock.
BN68-01169E-Eng-0312.indd 9

2007-03-12 4:33:17

If you want to reset this feature. 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER/OK button. 2. Press the ENTER/OK button again, to select "Plug & Play". 3. The message "Start Plug & Play" is displayed.
Setup Plug & Play Language :English Time Game Mode :Off Blue Screen :Off Melody :Off PC Home Theater PC :Off Light Effect :Watchung Mode On More

Move Enter Return

Start Plug & Play. OK

Return

- Storing Channels Automatically - Storing Channels Manually
Channel Country :Belgium Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA :Off
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER/OK button. 2. Press the ENTER/OK button to select "Country". 3. Select the appropriate country by pressing the or button. Press the ENTER/OK button to confirm your choice. ven though you have changed the country setting in this menu, the country setting for DTV is not E changed. Use the Plug & Play function to change the country setting for DTV. (Refer to page 9) 4. Press the or button to select "Auto Store", then press the ENTER/OK button. 5. Press the ENTER/OK button. The TV will begin memorizing all of the available channels. Press the ENTER/OK button at any time to interrupt the memorization process and return to the "Channel" menu. 6. After all the available channels are stored, the "Sort" menu appears.

English - 10

BN68-01169E-Eng-0312.indd 10

2007-03-12 4:33:18

Storing Channels Manually
You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER/OK button. 2. Press the or button to select "Manual Store", then press the ENTER/OK button. 3. Press the ENTER/OK button to select "Programme". 4. To assign a programme number to a channel, find the correct number by pressing the or button and then press the ENTER/OK button. You can also set a programme number by pressing number buttons on the remote control. 5. Press the or button to select "Colour System", then press the ENTER/OK button. 6. Select the colour standard required by pressing the or button then, press the ENTER/OK button. 7. Press the or button to select "Sound System", then press the ENTER/OK button. 8. Select the sound standard required by pressing the or button, then press the ENTER/OK button. If there is an abnormal sound or no sound, re-select the sound system required. 9. If you know the number of the channel to be stored, press the or button to select "Channel". Press the ENTER/OK button. Select C (Air channel) or S (Cable channel) by pressing the or button. Press the button to select channel. Select the required number by pressing the or button and then press the ENTER/OK button. Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode) You can also set a channel number by pressing number buttons on the remote control.
10. If you do not know the channel numbers, press the or button to select "Search". Press the ENTER/OK button. Search by pressing the or button and then press the ENTER/OK button. 11. Press the or button to select "Store". Press the ENTER/OK button to select "OK". 12. Repeat steps 3 to 11 for each channel to be stored. Programme: Selects a program number for the channel. Colour System: Sets the colour supporting system. Sound System: Sets the sound supporting system. Channel: Selects a channel. Search: Scans for the frequency value for the channel. Store: Saves your settings.

English - 11

BN68-01169E-Eng-0312.indd 11

2007-03-12 4:33:19

Setting the Channel Lists
Set the channels according to your preference. You can easily delete, add, or lock the channel you want. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER/OK button. 2. Press the or button to select "Channel Manager", then press the ENTER/OK button. 3. Press the ENTER/OK button again, to select "Channel List". 4. Press the button to select " " line. 5. Press the or button to select the undesired channel, then press the ENTER/OK button to cancel. 6. Repeat steps 5 for each channel to be selected or canceled 7. Press the EXIT button to exit. " " is active when "Child Lock" is selected to "On".

TV TV Picture Mode :Dynamic Contrast 100 Brightness 50 Sharpness 75 Colour 55 Tint G50 R50 Colour Tone :Cool1 Detailed Settings Backlight :10 sMore
Picture Dynamic Mode :Dynamic Standard Contrast 100 Movie Brightness 50 Sharpness 75 Colour 55 Tint G50 R50 Colour Tone :Cool1 Detailed Settings Backlight :10 sMore
You can also press the P.MODE button on the remote control to select one of the picture settings.
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality. 1. 2. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. Press the or button to select a particular item. Press the ENTER/OK button.
TV Picture Mode :Dynamic Contrast 100 Brightness 50 Sharpness 75 Colour 55 Tint G50 R50 Colour Tone :Cool1 Detailed Settings Backlight :10 sMore
3. Press the or button to decrease or increase the value of a particular item. Press the ENTER/OK button. 4. Press the EXIT button to exit.
Contrast: Adjusts the lightness and darkness between objects and the background. Brightness: Adjusts the brightness of the whole screen. Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull. Colour: Adjusts the colours, making them lighter or darker. Tint (NTSC or DTV only): Adjusts the colour of objects, making them more red or green for a more natural look. The adjusted values are stored according to the selected Picture mode. In PC Mode, Only "Contrast" and "Brightness" can be adjusted. Tint function is available only in HDMI and Component mode.

English - 15

BN68-01169E-Eng-0312.indd 15

2007-03-12 4:33:28

Changing the Colour Tone
You can select the most comfortable colour tone to your eyes. 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. (On page 15) 2. Press the or button to select "Colour Tone", then press the ENTER/OK button. 3. Press the or button to select the desired colour tone setting. Press the ENTER/OKbutton. 4. Press the EXIT button to exit Cool2: Makes the colour temperature bluer than "Cool1" menu. Cool1: Makes whites bluish. Normal: Keeps whites white. Warm1: Makes whites reddish. Warm2: Makes the colour temperature redder than "Warm1" menu.

Picture Mode :Dynamic Contrast 100 Brightness 50 Sharpness 75 Colour 55 Tint G50 Cool 2 R50 Colour Tone :Cool1 Cool 1 Detailed Settings Normal Backlight :10 Warm 1 sMore Warm 2
The adjusted values are stored according to the selected Picture mode. When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.

Activating Backlight

You can adjust the screen brightness by adjusting the LCD backlight brightness. (0~10) 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. (On page 15) 2. Press the or button to select Backlight, then press the ENTER/OK button. 3. Press the or button to decrease or increase the value of a particular item. 4. Press the ENTER/OK button. Press the EXIT button to exit.

Backlight Adjust

10 Return

English - 16

BN68-01169E-Eng-0312.indd 16

2007-03-12 4:33:30

Configuring Detailed Settings on the Picture
You can set detailed picture settings. 1. Press the MENU button to display the menu. 2. Press the ENTER/OK button, to select "Picture". 3. Press the or button to select "Detailed Settings", then press the ENTER/OK button. 4. Select the required option by pressing the or button, then press the ENTER/OK button. Available options: Adjust, Dynamic Contrast, Gamma, White Balance, My Colour Control, Edge Enhancement, Colour Space
TV Picture Mode :Movie Contrast 100 Brightness 50 Sharpness 75 Colour 55 Tint G50 R50 Colour Tone :Cool1 Detailed Settings Backlight :10 sMore
5. When you are satisfied with your setting, press the ENTER/OK button. 6. Press the EXIT button to exit. When the picture mode is set to Movie or Standard, Detailed Settings can be selected. DNIe is Off, the Detailed Settings cannot be selected when If the Picture mode is in Standard mode.
Detailed Settings Adjust :Off Dynamic Contrast:Off Gamma :-3 White Balance My Colour Control Edge Enhancement:Off Colour Space :Auto
Adjust: Off/Low/Medium/High You can directly select the level on the screen to adjust the screen depth. Dynamic Contrast: Off/Low/Medium/High You can adjust the screen contrast so that the optimal contrast is provided. Gamma: -3 ~ 3 You can adjust the middle brightness of pictures. Press the or button until you reach the optimal setting. White Balance: R Offset/G Offset/B Offset/R Gain/G Gain/B Gain/Reset You can adjust the color temperature for more natural picture colors. R Offset/G Offset/B Offset/R Gain/G Gain/B Gain: Changing the adjustment value will refresh the adjusted screen. Select the required option by pressing the or button, then press the ENTER/OK button. Press the or button until you reach the optimal setting. Reset: The previously adjusted white balance will be reset to the factory defaults. My Colour Control: Pink/Green/Blue/White/Reset This setting can be adjusted to suit your personal preferences. Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen. Select the required option by pressing the or button, then press the ENTER/OK button. Press the or button until you reach the optimal setting. eset: The previously adjusted colours will be reset to the factory defaults. R

DNIeTM (Digital Natural Image engine) This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes. This function is not available in PC mode. This function is not available in Movie mode
Movie Plus: Off/On You can view more natural skin and clear text even in fast moving scenes. Use this function when watching movies. The Wide Zoom, Zoom and Just Scan mode is not supported. This function is not available in PC mode.

English - 20

BN68-01169E-Eng-0313.indd 20

2007-03-13 9:34:23

Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture. 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER/OK button. 2. Press the or button to select "PIP", then press the ENTER/OK button. 3. Press the ENTER/OK button again. Press the or button to select "On", then press ENTER/OK button. If the PIP is activated, the size of the main picture turns to "16:9". 4. Press the or button to select "Source",then press ENTER/OK button. Select a source of the sub picture by pressing the or button and press the ENTER/OK button. The sub picture can serve different source selections based on what the main picture is set to. 5.
TV TV Mode :Custom Setup Equalizer More XT SRS TS :Off Auto Volume :Off Energy Saving :Off Internal Mute :Off HDMI Black Level:Low Reset PIP

MoveEnter

Mode :Custom PIP Equalizer PIP TS XT :On SRS :Off Source :TV Auto Volume :Off Size : Internal Mute :Off Position : Reset Programme :P 1
Press the or button to select "Size" of the sub picture Press the PIP button on the and then press the ENTER/OK button. Select a size of the remote control repeatedly to actisub picture by pressing the or button and then press the vate or deactivate the "PIP". ENTER/OK button. f main picture is in "PC" and "Component" mode, "Size" is I not available.
6. Press the or button to select "Position", then press the ENTER/OK button. Select the position of the sub picture by pressing the or button and then press the ENTER/OK button. 7. Press the or button to select "Programme" and then press the ENTER/OK button. You can select the channel that you want to view through sub picture by pressing the or button. Press the ENTER/OK button. The "Programme" can be active when the sub picture is set to TV. 8. Press the EXIT button to exit. You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. Source: Used to select a source of the sub picture. Size: Used to select a size of the sub picture. Position: Used to move the sub picture. Programme: Used to Change the sub picture. PIP Settings

O: PIP operates, X: PIP doesnt operate

Component HDMI PC

TV analog O O O

Ext.1 O O O

Ext.2 O O O

AV O O O

S-Video Component X X X X X X

HDMI X X X

PC X X X

TV digital X X X

English - 21
BN68-01169E-Eng-0312.indd 21

2007-03-12 4:33:38

HDMI Black Level
You can directly select the level on the screen to adjust the screen depth. 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER/OK button. 2. Press the or button to select "HDMI Black Level", then press the ENTER/OK button. 3. Press the or button to select "Normal" or "Low", then press the ENTER/OK button. 4. Press the EXIT button to exit. his Function is active only when the externel input connects T HDMI (RGB siginal). Normal: The screen gets brighter. Low: The screen gets darker.
Mode :Custom Setup Equalizer More XT SRS TS :Off Auto Volume :Off Energy Saving :Off Internal Mute :Off HDMI Black Level:Low Reset PIP

Move Enter

Mode :Custom Setup Equalizer More XT SRS TS :Off Auto Volume :Off Energy Saving :Off Internal Mute :Off Normal HDMI Black Level:Low Reset Low PIP
Changing the Sound Standard
You can select the type of the special sound effect to be used when watching a given broadcast. 1. Press the MENU button to display the menu. Press the or button to select "Sound", then press the ENTER/OK button. 2. Press the ENTER/OK button again, to select "Mode". 3. Select the required sound effect by pressing the or button repeatedly and then press the ENTER/OK button. 4. Press the EXIT button to exit. Standard: Selects the normal sound mode. Music: Emphasizes music over voices. Movie: Provides live and full sound for movies. Speech: Emphasizes voices over other sounds. Custom: Selects your custom sound settings. (Refer to "Adjusting the Sound Settings")
TV Sound Mode :Custom Equalizer SRS TS XT :Off Auto Volume :Off Internal Mute :Off Sound Select :Main Reset
Sound Standard Mode :Custom Music Equalizer Movie SRS TS XT :Off Speech Auto Volume :Off Custom Internal Mute :Off Sound Select :Main Reset

English - 22

BN68-01169E-Eng-0312.indd 22

2007-03-12 4:33:40

Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences. 1. Press the MENU button to display the menu. Press the or button to select "Sound", then press the ENTER/OK button. 2. Press the or button to select "Equalizer", then press the ENTER/OK button. 3. Press the or button to select a particular item. Press the ENTER/OK button. 4. Press the or button to reach the required setting. Press the ENTER/OK button. 5. Press the EXIT button to exit. If you make any changes to these settings, the Sound Mode is automatically switched to "Custom".

Mode :Custom Setup Equalizer Plug TSPlay SRS & XT :Off Language :English English Auto Volume :Off Time Deutsch Internal Mute :Off Game Mode :Off Franais Reset Blue Screen :Off Italiano Melody :Off Espaol PC Nederlands Home Theater PC :Off q Light Effect :Watching Mode On MoveEnter Return More

Using Game Mode

When connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by selecting game menu. 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER/OK button. 2. Press the or button to select "Game Mode", then press the ENTER/OK button. 3. Press the or button to select "On" or "Off". Press the ENTER/OK button. 4. Press the EXIT button to exit.
To disconnect the game console and connect another external device, cancel game mode in the setup menu. If you display the TV menu in Game mode, the screen shakes slightly. Move Enter Return Game Mode is not available in TV mode. If Game Mode is On: Picture Mode changes to Standard and Sound Mode changes to Custom automatically. The user cannot change these to other modes. Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer. The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.
Mode :Custom Setup Equalizer Plug TSPlay SRS & XT :Off Language :English Auto Volume :Off Time Internal Mute :Off Game Mode :Off Off Reset Blue Screen :Off On Melody :Off PC Home Theater PC :Off Light Effect :Watching Mode On MoveEnter Return More

English - 28

BN68-01169E-Eng-0312.indd 28

2007-03-12 4:33:52

Setting the Blue Screen Mode / Selecting the Melody
Blue Screen: If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off". Melody: You can hear melody sound when the television is powered on or off. 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER/OK button. 2. Press the or button to select "Blue Screen" or "Melody". Press the ENTER/OK button. 3. When you are satisfied with your setting, press the ENTER/OK button. Blue Screen: Off/On Melody: Off/Low/Medium/High
TV TV Mode :Custom Setup Equalizer Plug TSPlay & XT SRS :Off Language :English Auto Volume :Off Time Internal Mute :Off Game Mode :Off Reset Blue Screen :Off Off Melody :Off On PC Home Theater PC :Off Light Effect :Watching Mode On MoveEnter Return More

The favourites list is empty. 13:00 Would you like to choose your favourites now?

English - 39

BN68-01169E-Eng-0312.indd 39

2007-03-12 4:34:15

Adjusting the Menu Translucency
You can set the translucency of the menu. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Setup", then press the ENTER/OK button. 3. Press the or button to select "Menu Transparency" then press the ENTER/OK button. 4. Select the required option ("High", "Medium", "Low", or "Opaque") by pressing the or button, and press the ENTER/OK button to change the setting. 5. Press the EXIT button to exit.
Setup Menu Transparency :Medium High Parental Lock Medium Subtitle :On Low Subtitle Mode :Normal Opaque Audio Format
Setting up the Parental Lock
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by a 4-digit PIN (Personal Identification Number) code that is defined by the user. The on-screen menu will instruct you to assign a PIN code (you can change it later, if necessary). 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Setup", then press the ENTER/OK button. 3. Press the or button to select "Parental Lock.", then press the ENTER/OK button. 4. The "Enter PIN" is displayed. 5. Enter your current 4-digit PIN code by using the numeric buttons (0~9). The options available in the "Parental Lock" group are displayed with the "Parental Rating" selected. The default PIN code for a new TV set is 0000. If you enter an invalid PIN code,the "Invalid PIN code. Please try again." message is displayed. 6. Press the ENTER/OK button. 7. Press the or button to select the age rating you want to lock out. Press the ENTER/OK button. 8. If you want to change the PIN code,select "Change PIN" by pressing the or button. Press the ENTER/OK button. The "Enter New PIN" is displayed. 9. Enter your new PIN code by using the numeric buttons (0~9). The "Confirm New PIN" is displayed. 10. Re-enter your new PIN code to confirm by using the numeric buttons (0~9). he Your PIN code has been changed successfully T message is displayed. 11. Press the ENTER/OK button. 12. Press the EXIT button to exit. If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to 0-0-0-0: POWER (Off), MUTE, 8, 2, 4, POWER (On).

English - 40

Setup Menu Transparency :Medium Parental Lock Subtitle :On Subtitle Mode :Normal Audio Format MoveEnter

Parental Lock Enter PIN

Enter PIN
Parental Lock Parental Rating: No Block No Block No Block Change PIN 7 MoveEnter Return
Change PIN Confirm New PIN
Your PIN code has been changed successfully.

Enter PIN Return

BN68-01169E-Eng-0312.indd 40

2007-03-12 4:34:18

Setting the Subtitle
You can activate and deactivate the subtitles. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Setup", then press the ENTER/OK button. 3. Press the or button to select "Subtitle ", then press the ENTER/OK button. 4. Select "On" by pressing the or button. Press the ENTER/OK button. 5. Press the EXIT button to exit.
Setup Menu Transparency :Medium Parental Lock Subtitle :On Off Subtitle Mode :Normal On Audio Format MoveEnter
Setting the Subtitle Mode
Use this menu to set the Subtitle Mode. "Normal" under the menu is the basic subtitle and "Hard of hearing" is the subtitle for a hearing-impaired person. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Setup", then press the ENTER/OK button. 3. Press the or button to select "Subtitle Mode", then press the ENTER/OK button. 4. Press the or button to select "Normal" or "Hard of hearing". Press the ENTER/OK button. 5. Press the EXIT button to exit. If the programme you are watching does not support the "Hard of hearing" function, "Normal" automatically activates even though "Hard of hearing" mode is selected.
Setup Menu Transparency :Medium Parental Lock :On Subtitle Subtitle Mode :Normal Normal Audio Format Hard of hearing MoveEnter
Selecting the Audio Format
You can only hear Dolby Digital sound through the audio Setup Menu Transparency :Medium receiver connected through an optical cable. You can only Parental Lock hear PCM sound through the main speaker. Subtitle :On When sound is emitted from both the main speaker and the Subtitle Mode :Normal audio receiver, a sound echo may occur due to the decoding Audio Format : PCM speed difference between the main speaker and the audio receiver. In this case, use the internal mute function. 1. Press the D.MENU button to display the DTV menu. Move Enter Return 2. Press the or button to select "Setup", then press the ENTER/OK button. 3. Press the or button to select "Audio Format", then press the ENTER/OK button. 4. Press the or button to select "PCM" or "Dolby Digital". Press the ENTER/OK button. 5. Press the EXIT button to exit. The Audio Format appears according to the broadcasting signal. Dolby digital sound is only available when the TV is connected with an external speaker using an optical cable.

Application Info

Type : CA Manufacturer : Channel Plus Info : Top Up TV
Selecting the CI (Common Interface) Menu
This enables the user to select from the CAM-provided menu. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Setup", then press the ENTER/OK button. 3. Press the or button to select "System", then press the ENTER/OK button. 4. Press the or button to select "Common Interface", then press the ENTER/OK button. 5. Select to "CI Menu" by pressing the or button, and press the ENTER/OK button. 6. Select the required option by pressing the or button, and press the ENTER/OK button. 7. Press the EXIT button to exit. Select the CI Menu based on the menu PC Card.

CI Menu

Main menu Module information Smart card information Language Software Download Press OK to select, or Exit to quit Move Enter Exit

English - 44

BN68-01169E-Eng-0313.indd 44

2007-03-13 8:35:37

Resetting
You can reset the values stored to the factory default values. The Reset operation deletes all channel information and user preferences returningall values to their default factory state. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Setup", then press the ENTER/OK button. 3. Press the or button to select "System", then press the ENTER/OK button. 4. Press the or button to select "Reset", then press the ENTER/OK button. 5. The "Enter PIN" screen will appear. 6. Enter your current 4-digit PIN code by using the numeric buttons (0~9). The warning message is displayed.All values will be reset by pressing the coloured buttons (red, green, yellow, and blue)in turn. 7. Press the EXIT button to exit.

Reset Enter PIN

WARNING: All channel settings and user preferences will be lost and returned to the factory defaults. It is recommended that a reset is performed only when serious problems are experienced.

Move Enter Return Move Enter Return Move Enter Return
Mode :Custom Image Lock Equalizer SRS TS XT :Off Coarse50 Auto Volume :Off Fine50 Internal Mute :Off Reset

Position

PC Image Lock Position Auto Adjustment Image Reset

English - 53

BN68-01169E-Eng-0312.indd 53

2007-03-12 4:34:34

Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use. 1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2).
Figure 2 Figure 1 <Optional> The place of the Kensington Lock may be different depending on its model.
2. Connect the Kensington lock cable. 3. Fix the Kensington lock to a desk or a heavy stationary object.
Troubleshooting: Before Contacting Service Personnel
No sound or picture Check that the mains lead has been connected to a wall socket. Check that you have pressed the POWER buttons on the front of the set. Check the picture contrast and brightness settings. Check the volume. Check the volume. Check whether the MUTE button has been pressed on the remote control. Check if "Internal Mute" is off Adjust the colour settings. Check that the broadcast system selected is correct. Try to identify the electrical appliance that is affecting the set and move it further away. Plug your set into a different mains socket. Check the direction, location and connections of your aerial. This interference is often due to the use of an indoor aerial. Replace the remote control batteries. Clean the upper edge of the remote control (transmission window). Check the battery terminals. Check that the signal cable is firmly connected to the PC or video sources. Check that the PC or video sources are turned on.
Normal picture but no sound No picture or and white picture Sound and picture interference Blurred or snowy picture, distorted sound Remote control malfunctions

BN68-01169E-Eng-0312.indd 57
This page is intentionally left blank.
BN68-01169E-Eng-0312.indd 58
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
BN68-01169E-Eng-0312.indd 59

2007-03-12 4:34:37