uSING The DTV FeATuRe

Previewing the DTV Menu System...19. Updating the Channel List Automatically.19. Updating the Channel List Manually.. Editing Your Favourite Channels..20 Selecting Channel Manager..21 Displaying Programme Information...22 Viewing the EPG (Electronic Programme Guide) Information...22 Using the Scheduled List..23. Setting the Default Guide...23 Viewing All Channels and Favourite Channels..24 Setting the Preferred Languages..24 Choosing Your Language...25 Adjusting the Translucency Level.. Setting up the Parental Lock...25 Setting the Subtitle...26 Selecting the Preferred Language (Subtitle or Audio)...26 Setting the Digital Text...26. Viewing Product Information...26. Checking the Signal Information..27 Upgrading the Software (Option)..27. Viewing Common Interface...27 Selecting the CI (Common Interface) Menu..28 Resetting...28.

Setting the Channels

Storing Channels Automatically.. 8. Storing Channels Manually... 8. Setting the Channel Manager.. 9. Activating the Child Lock... 9. Sorting the Stored Channels...10 Assigning Channels Names..10 Fine Tuning Channel Reception...10 LNA (Low Noise Amplifier)...11.

Setting the Picture

Changing the Picture Standard..11 Adjusting the Custom Picture..11 Changing the Colour Tone...11. Resetting the Picture Settings to the Factory Defaults...12 Changing the Picture Size..12 Freezing the Current Picture...12 Digital Noise Reduction...12 DNIe Demo (Digital Natural Image engine)..13. Viewing the Picture In Picture (PIP)..13 PIP Settings....14
Using the Teletext Feature
Teletext Decoder... Displaying the Teletext Information. Selecting a Specific Teletext Page.. 9. 2 Using Fastext to Select a Teletext Page.. 0 3

Setting the PC

Setting up Your PC Software (Based on Windows XP).. Display Modes.. 0. 3 Setting the PC... 1 3

Setting the Sound

Changing the Sound Standard.. 4. 1 Adjusting the Sound Settings.. 4. 1 Connecting Hheadphones.. 4. 1 Setting the TruSurround XT (SRS TSXT). Adjusting the Volume Automatically.. Selecting the Internal Mute.. Listening to the Sound of the Sub Picture.. Resetting the Sound Settings to the Factory Defaults.. 6. 1

Dynamic: Selects the picture for high-definition in a bright room. Standard: Selects the picture for optimum display in a normal environment. Movie: Selects the picture for comfortable display in a dark room. ustom: Select to view your favorite display settings. (Refer to "Adjusting the Custom Picture") C The Picture mode must be adjusted separately for each input source. You can return to the factory defaults picture settings by selecting the "Reset". (Refer to "Resetting the Picture Settings to the Factory Defaults" on page 12)
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality. 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 4. 2. ress the or button to select a particular item. Press the ENTER P button. 3. Press the or button to decrease or increase the value of a particular item. Press the ENTER button. 4. Press the EXIT button to exit.
Contrast: Adjusts the lightness and darkness between objects and the background. Brightness: Adjusts the brightness of the whole screen. Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull. Colour: Adjusts the colours, making them lighter or darker. Tint (NTSC only): Adjusts the colour of objects, making them more red or green for a more natural look. The adjusted values are stored according to the selected Picture mode. In PC Mode, Only Contrast, Brightness and Colour can be adjusted.

Changing the Colour Tone

You can select the most comfortable colour tone to your eyes. 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 4. 2. Press the or button to select "Colour Tone", then press the ENTER 3. ress the or button to select the desired colour tone setting. P Press the ENTER button. 4. Press the EXIT button to exit.
Cool2:Makes the colour temperature bluer than "Cool1" menu. Warm1: Makes whites reddish. Cool1: Makes whites bluish. Warm2: Makes the colour temperature redder than Normal:Keeps whites white. "Warm1" menu. The adjusted values are stored according to the selected Picture mode. English-11
BN68-01007A-00Eng.indd 11

2006-03-02 4:49:25

Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings. 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 4 on page 11. 2. Press the or button to select "Reset", then press the ENTER 3. Press the EXIT button to exit.

The "Reset" will be set for each picture mode.
Changing the Picture Size
You can select the picture size which best corresponds to your viewing requirements. 1. 2. 3. 4. Press the MENU button to display the menu. Press the or button to select "Picture", then press the ENTER Press the or button to select "Size", then press the ENTER elect the required option by pressing the or button. S Press the ENTER button. Press the EXIT button to exit. button. button.
You can select these options by simply pressing the P.SIZE button on the remote control.
Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio. 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. Zoom: agnifies the 16:9 wide picture (in the vertical direction) to fit the screen size. M 4:3: This is the default setting for a video movie or normal broadcasting. Auto Wide function is available only in TV, Ext1, Ext2, AV, and S-Video mode. In PC Mode, only "16:9" and "4:3" mode can be adjusted. S elect by pressing the or buttons. Use the or button to move the picture up and down. After selecting , use the or button to magnify or reduce the picture size in the vertical direction.
Freezing the Current Picture
Press the STILL button to freeze a moving picture into a still one. Press again to cancel.

Digital Noise Reduction

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1. Press the MENU button to display the menu. Press the or button to select "Picture", then press the ENTER 2. Press the or button to select "Digital NR", then press the ENTER 3. ress the or button to select "On" or "Off". Press the ENTER P 4. ress the EXIT button to exit. P button. button. button.

English-12

BN68-01007A-00Eng.indd 12

2006-03-02 4:49:26

DNIe Demo (Digital Natural Image engine)
Samsungs new technology brings you more detailed images with contrast and white enhancement. A new image compensation algorithm gives viewers brighter and clearer images. DNIe technology will match every signal to your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode to On. 1. Press the MENU button to display the menu. Press the or button to select "Picture", then press the ENTER 3. ress the or button to select "On" or "Off". Press the ENTER P 4. ress the EXIT button to exit. P
These functions dont work in PC mode. The DNle Demo is designed to show the difference between the regular and DNIe pictures. By default, the product displays the picture with DNle applied.

button. button. button.

2. Press the or button to select "DNIe Demo", then press the ENTER
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture. 1. 2. 3. 4.
P ress the PIP button on the remote control repeatedly to activate or deactivate the "PIP".
Press the MENU button to display the menu. Press the or button to select "Picture", then press the ENTER Press the or button to select "PIP", then press the ENTER Press the ENTER button again. Press the or button to select "On", then press ENTER
I f the PIP is activated, the size of the main picture turns to 16:9.
ress the or button to select "Source",then press ENTER P button. Select a source of the sub picture by pressing the or button and press the ENTER button.
T he sub picture can serve different source selections based on what the main picture is set to.
ress the or button to select "Swap". P To interchange the main picture and the sub picture, select "Swap" option and press the ENTER button.
The main picture and the sub picture are interchanged. If main picture is in "PC" mode, "Swap" is not available.
6. Press the or button to select "Size" of the sub picture and then press the ENTER button. Select a size of the sub picture by pressing the or button and then press the ENTER button.
If main picture is in "PC" mode, "Size" is not available.
7. Press the or button to select "Position", then press the ENTER button. Select the position of the sub picture by pressing the or button and then press the ENTER button.
8. Press the or button to select "Programme" and then press the ENTER button. You can select the channel that you want to view through sub picture by pressing the or button. Press the ENTER button.
The "Programme" can be active when the sub picture is set to TV.
9. ress the EXIT button to exit. P
Y ou may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. Source: Used to select a source of the sub picture. Swap: Used to interchange the main picture and the sub picture. Size: Used to select a size of the sub picture. Position: Used to move the sub picture. Programme: Used to Change the sub picture. English-13

BN68-01007A-00Eng.indd 13

2006-03-02 4:49:27

PIP Settings
O: PIP operates, X: PIP doesnt operate Main Sub
TV Ext.1 Ext.2 AV S-Video Component PC HDMI DTV

TV X X X X X X O O X

Ext.1 X X X X X X O O X

Ext.2 X X X X X X O O X

AV X X X X X X O O X
S-Video X X X X X X X O X
Component X X X X X X X O X

PC X X X X X X X X X

HDMI O O O O O O X X X

DTV X X X X X X X X X

Changing the Sound Standard
You can select the type of the special sound effect to be used when watching a given broadcast. 1. 2. 3. 4. Press the MENU button to display the menu. Press the or button to select "Sound", then press the ENTER Press the ENTER button again, to select "Mode". button.
elect the required sound effect by pressing the or button repeatedly and then S press the ENTER button. Press the EXIT button to exit.
You can also select these options by simply pressing the S.MODE button on the remote control.
Standard: Selects the normal sound mode. Music: Emphasizes music over voices. Movie: Provides live and full sound for movies. Speech: Emphasizes voices over other sounds. ustom: Selects your custom sound settings. C (Refer to "Adjusting the Sound Settings")
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences. 1. Press the MENU button to display the menu. Press the or button to select "Sound", then press the ENTER 2. Press the or button to select "Equalizer", then press the ENTER 3. Press the or button to select a particular item. Press the ENTER button. 4. Press the or button to reach the required setting. Press the ENTER button. 5. Press the EXIT button to exit.
you make any changes to these settings, the Sound Mode is automatically switched to "Custom". If

Connecting Hheadphones

You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.
When you insert the head set jack into the corresponding port, you can operate only Internal Mute and Sound Select (in PIP mode) in Sound menu. Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system. English-14
BN68-01007A-00Eng.indd 14

2006-03-02 4:49:28

Setting the TruSurround XT (SRS TSXT)
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling,virtual surround sound experience through any twospeaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. 1. Press the MENU button to display the menu. Press the or button to select Sound, then press the ENTER button. 2. Press the or button to select SRS TSXT, then press the ENTER button. 3. Press the or button to select On or Off. Press the ENTER 4. Press the EXIT button to exit. button.

2. Press the or button to select Game Mode, then press the ENTER
Setting the Blue Screen Mode / Selecting the Melody
Blue Screen: If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off". Melody: You can hear melody sound when the television is powered on or off. 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER 2. Press the or button to select "Blue Screen" or "Melody". Press the ENTER button. 3. ress the or button to select "On" or "Off". P Press the ENTER button. 4. ress the EXIT button to exit. P

English-17

BN68-01007A-00Eng.indd 17

2006-03-02 4:49:32

Using the Energy Saving Feature
This function adjusts the brightness of the TV so as to reduce power consumption. When you watching TV at night, set the "Energy Saving " mode option to "High" so as to reduce the dazzling of your eyes as well as the power consumption. 1. Press the MENU button to display the on-screen menu. Press the or button to select "Setup", then press the ENTER button. button.
2. Press the or button to select "Energy Saving", then press the ENTER
3. elect the required option (Off, Low, Medium, High) by pressing the or button. S Press the ENTER button. 4. Press the EXIT button to exit.

Selecting the Source

You can select among external sources connected to your TVs input jacks. 1. 2.
Press the MENU button to display the menu. Press the ENTER button, to select "Input". Press the ENTER button again, to select "Source List".
W hen no external device is connected to your set, only "TV", "Ext.1", "Ext.2" are activated in the "Source List". "AV", "S-Video", "Component", "PC", "HDMI", "DTV" are activated only when they are connected to your set.

Select the required device by pressing the or button. Press the ENTER button.
Press the SOURCE button on the remote control to toggel between all the available source. TV mode can be selected by pressing the TV/DTV button, number buttons(0~9), and the P / button on the remote control. But it cannot be selected using the SOURCE button.
Editing the Input Source Names
Name the device connected to the input jacks to make your input source selection easier. 1. Press the MENU button to display the menu. Press the ENTER button, to select "Input". 2. Press the or button to select "Edit Name", then press the ENTER 3. Press the or button to select the device that you wish to edit. Press the ENTER button. 4. Press the or button to select the required device. Press the ENTER button. 5. Press the EXIT button to exit. button.

English-18

BN68-01007A-00Eng.indd 18

2006-03-02 4:49:33

Previewing the DTV Menu System
To help you navigate around the on-screen menu system and adjust the various settings available, refer to the following illustration. A vailable in the Digital TV mode. Press the D.MENU button.
Guide Now & Next Guide Full Guide Scheduled List Default Guide Preference Preferred Subtitle Language Preferred Audio Language OSD Language Translucency Level Parental Lock Feature Subtitle Subtitle Language Audio Language Digital Text Channel Auto Store Manual Store Edit Favourite Channels Channel Manager System Product Information Signal Information Software Upgrade Common Interface Reset Module Information Smart card information Language Software Download On, Off English, Welsh, Gaelic, Irish English, Welsh, Gaelic, Irish English, Deutsch, Italiano, Franais, Svenska High, Medium, Low, Opaque Parental Rating Change PIN

Now/Next, Full Guide

Disable, Enable

Application Info CI Menu

T he sub-items of the CI Menu may vary depending on the CAM model.
Y ou can select these options by simply pressing the D.MENU button on the remote control.
Updating the Channel List Automatically
You can update the channel list when the broadcaster adds new Services or if you move the TV to a new location. 1. 2. 3. 4.
Press the D.MENU button to display the DTV menu. Press the or button to select "Channel", then press the ENTER Press the ENTER button again, to select "Auto Store". When it has finished, the number of scanned services will be displayed.
The existing favourite channel list will not be deleted when the channel list is updated. To stop the scan before it has finished, press the ENTER button with "STOP" selected.
If the signal status is poor, the No Service found! Check the aerial connection message is displayed. English-19

A " " icon is displayed on the left side of the channel name.
Press the or button to select the channel that you want to move, and press the green or ENTER button. Press the EXIT button to exit. Preview
In the "Edit Favourite Channels" menu, select the channel to be previewed by pressing the or button. Press the yellow button.
The selected channel is displayed on the screen.

Delete 1. 2.

In the "Edit Favourite Channels" menu, select the channel to be deleted from the favourite channels list by pressing the or button. Press the blue button.
The selected channel and number will be deleted. To add a deleted channel back in to the favourite channel list, see "Add" on page 20.
Selecting Channel Manager
You can exclude the channels you have chosen from the channels you have scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning. 1. 2. 3. 4.
ou can select these options by Y
Press the D.MENU button to display the DTV menu. Press the or button to select "Channel", then press the ENTER button. button. Press the or button to select "Channel Manager". Press the ENTER
Your favourite channels are only displayed if they were previously set in the " Editing Your Favourite Channels" menu (refer to page 20~21).
Press the yellow button to toggle between your favourite channels and all channels.

5. 6.

Press the red or green button to display the previous or next channel manager page. Press the or button to select a channel to be tuned. Press the ENTER button.
simply pressing the CH MGR button on the remote control.
he channel number, name and an icon are displayed in the top left corner while changing T the channel. The channel number and name are displayed if the channel is one of the all channels, and a icon if the channel is one of the favourite channels.

You can choose one of five languages.
Adjusting the Translucency Level
You can set the translucency of the menu. 1. 2. 3. 4. 5. Press the D.MENU button to display the DTV menu. Press the or button to select "Preference", then press the ENTER Press the or button to select "Translucency Level", then press the ENTER button. Select the required option ("High", "Medium", "Low", or "Opaque") by pressing the or button, and press the ENTER button to change the setting. Press the EXIT button to exit. button.
Setting up the Parental Lock
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by a 4-digit PIN (Personal Identification Number) code that is defined by the user. The on-screen menu will instruct you to assign a PIN code (you can change it later, if necessary). 1. 2. 3. 4. 5.
Press the D.MENU button to display the DTV menu. Press the or button to select "Preference", then press the ENTER Press the or button to select "Parental Lock.", then press the ENTER The "Enter PIN" is displayed. Enter your current 4-digit PIN code by using the numeric buttons (0~9). The options available in the "Parental Lock" group are displayed with the "Parental Rating" selected.
The default PIN code for a new TV set is 0000. If you enter an invalid PIN code,the "Invalid PIN code. Please try again." message is displayed.

6. 7. 8.

Press the ENTER
Press the or button to select the age rating you want to lock out. Press the ENTER button. If you want to change the PIN code,select "Change PIN" by pressing the or button. Press the ENTER button.
The "Enter New PIN" is displayed.
Enter your new PIN code by using the numeric buttons (0~9).
The "Confirm New PIN" is displayed. The Your PIN code has been changed successfully message is displayed.
10. Re-enter your new PIN code to confirm by using the numeric buttons (0~9). 11. Press the ENTER button.
12. Press the EXIT button to exit.
If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to 0-0-0-0: POWER (Off), MUTE, 8, 2, 4, POWER (On). English-25
BN68-01007A-00Eng.indd 25

T he Product Information menu is selected. - Software Version, Firmware Version

English-26

BN68-01007A-00Eng.indd 26

2006-03-02 4:49:48

Checking the Signal Information
You can get information about the signal status. 1. 2. 3. 4. Press the D.MENU button to display the DTV menu. Press the or button to select "System", then press the ENTER Press the or button to select "Signal Information", then press the ENTER button. Press the EXIT button to exit.
I f the signal status is poor, the "No signal." message is displayed.
Upgrading the Software (Option)
To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as part of the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You are given the option to install the upgrade. U pgrade Now If you select "Upgrade Now", the "iDTV" immediately installs the new upgrade and then restarts. U pgrade Later If you select "Upgrade Later", the upgrade is postponed until the next restart or channel change some 90 minutes later, when the upgrade dialog appears again. D ont Upgrade If you select "Dont Upgrade", the "iDTV" does not perform the upgrade and the software upgrade banner is not displayed again. The upgrade is still stored internally, to subsequently upgrade to the new version then the following sequence of steps are performed. 1. 2. 3. 4. 5. Press the D.MENU button to display the DTV menu. Press the or button to select "System", then press the ENTER Press the or button to select "Software Upgrade", then press the ENTER button. To switch to an alternative version, press the red button. Press the blue button to reset, activate the upgrade and restart. Press the EXIT button to exit. button.

Viewing Common Interface

This contains information on CAM inserted in the CI slot and displays it. 1. 2. 3. 4. 5. Press the D.MENU button to display the DTV menu. Press the or button to select "System", then press the ENTER Press the or button to select "Common Interface", then press the ENTER button. Press the ENTER button to display the information for your application. Press the EXIT button to exit.
The Application Info inserting is about the CI CARD. You can install the CAM anytime whether the TV is ON or OFF. 1. Purchase the CI CAM module by visiting your nearest dealer or by phone. 2. Insert the CI CARD into the CAM in the direction of the arrow until it fits. 3. Insert the CAM with the CI CARD installed into the common interface slot. (Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.) 4. Check if you can see a picture on a scrambled signal channel.

Selecting a Specific Teletext Page
Press the number buttons on the remote control to enter the page number directly: 1. nter the three-digit page number listed in the contents by pressing the E corresponding numeric buttons. 2. f the selected page is linked with several secondary pages, the secondary pages I are displayed in sequence. To freeze the display on a given page, press the PIP ( ). Press the PIP ( ) button again to resume. 3. Using the various display options:
To display. Both teletext information and the normal broadcast Hidden text (answers to quiz games, for example) The normal screen A secondary page, by entering its 4-digit number The next page The previous page Double-size letters in the: Upper half of the screen Lower half of the screen Normal screen Press the. TTX/MIX ( INFO ( INFO ( ) ) ) )

PRE-CH ( P P ( ( ) )

P.MODE ( Once Twice

Three times

English-29
BN68-01007A-00Eng.indd 29

2006-03-02 4:49:52

Using Fastext to Select a Teletext Page
The various topics included in the teletext pages are colour-coded, and can be selected by pressing the coloured buttons on the remote control. 1. 2. 3. 4. isplay the teletext contents page by pressing the TTX/MIX ( D ) button. ress the coloured button corresponding to the topic that you wish to select (The P available topics are listed on the status information line). Press the Red button to display the previous page. Press the Green button to display the next page. ress the TV/DTV button to exit from the Text display. P
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. First, click on "Control Panel" on the Windows start menu. 2. When the control panel window appears, click on "Appearance and Themes" and a display dialog-box will appear. 3. When the control panel window appears, click on "Display" and a display dialog-box will appear. 4. Navigate to the "Settings" tab on the display dialog-box. The correct size setting (resolution): Optimum- 1360 X 768 I f a vertical-frequency option exists on your display settings dialog box, the correct value is "60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended. (All resolutions between the supported limits are supported)
Mode IBM VESA Resolution 640 x x x x x x x x x x x 768 Horizontal Frequency (kHz) 31.469 31.469 37.861 37.500 37.879 48.077 46.875 48.364 56.476 60.023 47.712 Vertical Frequency (Hz) 59.940 70.087 72.809 75.000 60.317 72.188 75.000 60.000 70.069 75.029 60.015 Pixel Clock Frequency (MHz) 25.175 28.322 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 85.800 Sync Polarity (H/V) - / - -/+ - / - - / - + /+ + /+ + /+ - / - - / - + /+ + /+
The interface mode is not supported. The set might operate abnormally if a non-standard video format is selected. DVI does not support PC function. Separate and Composite modes are supported. SOG is not supported.

English-30

BN68-01007A-00Eng.indd 30
Coarse and Fine Tuning of the Image (Image Lock): The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. 1. 2. 3. 4. 5. 6. 7. Preset: Press the SOURCE button to select PC mode. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER Press the or button to select "PC", then press the ENTER Press the ENTER button to select "Image Lock". button. button. button.
Press the or button to select "Coarse" or "Fine", then press the ENTER Press the or button to adjust the screen quality. Press the ENTER button. Press the EXIT button to exit.
Changing the Image Position (Position): Adjust the PCs screen positioning if it does not fit the TV screen. 1. 2. 3. 4. Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3. Press the or button to select "Position", then press the ENTER Press the or button to adjusting the Vertical-Position. Press the or button to adjust the Horizontal-Position. Press the ENTER button. Press the EXIT button to exit. button.
Adjusting the PC Screen Automatically (Auto Adjustment): Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically. 1. 2. 3. Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3. Press the or button to select "Auto Adjustment", then press the ENTER Press the EXIT button to exit. button.
Initializing the Image Settings (Image Reset): You can replace all image settings with the factory default values. 1. 2. 3. Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3. Press the or button to select "Image Reset", then press the ENTER Press the EXIT button to exit. button.

English-33

BN68-01007A-00Eng.indd 33

2006-03-02 5:14:50

Warning! Important Safety Instructions
Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.

CAUTION

RISKOFELECTRICSHOCK DONOTOPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered. - Do not cover the slots and openings with a cloth or other materials. - Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface. - Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided. Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight. Do not place sources of heat on this apparatus, such as a candles, ash trays, incense or other similar items. Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock. Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately. You can clean this apparatus with damp cloth when necessary, but be sure to unplug the apparatus first. Do not expose this apparatus to extreme temperature conditions or to extreme humidity conditions. This appratus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under environmental considerations. Please contact your local authorities for disposal or recycling information. To cut off the power source, unplug this apparatus from the wall outlet. Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock. Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance. To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges. Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corrsponds to the local electrical supply. Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock. To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus. Be sure to hold the plug, not the cord, when disconnecting this apparatus from an electric socket. Locate this apparatus near an easily accessible AC outlet. If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center. Unplug this apparatus from the AC outlet before any service. Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house). - Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate. Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc. Failure to do so may cause serious damage to your set.