Reviews & Opinions
Independent and trusted. Read before buy Samsung LE40B554!

Samsung LE40B554

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Samsung LE40B554 TV, size: 60.5 MB
Related manuals
Samsung LE40B554m2w Quick Guide
Samsung LE40B554 Power Consumption Guide (ver.1.0)
Samsung LE40B554m2w Quick Guide (ver.1.0)
Samsung LE40B554 Open Source Guide (ver.1.0)
Samsung LE40B554m2P

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Samsung LE40B554About Samsung LE40B554
Here you can find all about Samsung LE40B554 like manual and other informations. For example: .

Samsung LE40B554 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Samsung LE40B554 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Samsung LE40B554 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

EIRE U.K

Customer Care Centre

SAMSUNG (7267864)

Web Site

www.samsung.com/ie www.samsung.com/uk

user manual

LCD TV
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model Serial No.

BN68-01962L-00

BN68-01962L_Cover.indd 1

2009-03-31 11:50:46

English

Information on Use

Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen. Do not display a still image and partially still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as screen burn. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the brightness and contrast when displaying still images.
WARNINGS: Image retention, commonly known as screen burn-in, can occur on most types of television if the same image is displayed continuously. The most common causes of image retention are logos that remain stationary on the TV screen. These logos are common on many programmes received via a Set-top Box. To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast settings to decrease the intensity of the picture. Extended viewing of movies and programs in aspect ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour to avoid black borders top or bottom by using the zoom function. This will help eliminate the black borders and fit the picture to the entire area of the screen. Using a video game console may cause image retention and is not recommended. When using a PC input, avoid displaying still images for long durations and reduce the brightness or contrast settings to decrease the intensity of the picture. IMPORTANT: Image retention issues are not covered by your Samsung warranty.
Digital TV (DVB-T) Notice
Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C(MPEG2 and MPEG4 AAC) cable- TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVBC is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video on Demand) and so on, are not included in this specification. So, they cannot be workable at this moment. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers. For more information, please contact your local Samsung customer care centre.

BN68-01962L_Eng.indd 5

Installing the Stand
Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to 32inch models only.
Attach your LCD TV to the stand. Two or more people should carry the TV. Make sure to distinguish between the front and back of the stand when assembling them. To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left of right sides of the TV.
Fasten screws at position 1 and then fasten screws at position 2. Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one side. The stand is installed for models with the screen size of 37 inch and above.

Disconnecting the Stand

Remove four screws from the back of the TV. Separate the stand from the TV. Two or more people should carry the TV. Cover the bottom hole with the cover.

BN68-01962L_Eng.indd 6

2009-03-31 11:47:31
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own. Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock. Remove the stand and cover the bottom hole with a cap and fasten with two screws.

Assembling the Cables

Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the transparent stand.
Anti-Theft Kensington Lock
The Kensington Lock is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking device has to be purchased separately. The location of the Kensington Lock may be different depending on its model.
Insert the locking device into the Kensington slot on the LCD TV (1) and turn it in the locking direction (2). Connect the Kensington Lock cable (3). Fix the Kensington Lock to a desk or a heavy stationary object.

BN68-01962L_Eng.indd 7

BN68-01962L_Eng.indd 12

6 H(HEADPHONE) Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled. Using the sound function is restricted when connecting headphones to the TV. Prolonged use of headphones at a high volume may damage your hearing. You will not hear sound from the speakers when you connect headphones to the TV. The headphone volume and TV volume are adjusted separately. 7 DIGITAL AUDIO OUT (OPTICAL) Connects to a Digital Audio component such as a Home theatre receiver. When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV and adjust the volume level with the systems volume control. 5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH. When the receiver (home theatre) is set to On, you can hear sound output from the TVs Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theatre receiver. If you want to hear 5.1 channel audio, connect the digital audio out jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an Amplifier or Home Theatre, not the TV. 8 SERVICE Connector for service only. 9 AUDIO OUT [R-AUDIO-L] Connects to the audio input jacks on your Amplifier/Home theatre. When an audio amplifier is connected to the AUDIO OUT [R-AUDIO-L] jacks: Decrease the volume of the TV and adjust the volume level with the Amplifiers volume control. 0 EXT1, 2 Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players. In EXT Mode, DTV Out supports MPEG SD Video and Audio only. Input/Output Specification Connector EXT 1 EXT 2 ! @ # Video O O Input Audio (L / R) O O RGB O X Output Video + Audio (L / R) Only TV or DTV output is available. Output you can choose.
AV IN [VIDEO] / [R-AUDIO-L] Video and audio inputs for external devices, such as a camcorder or VCR. USB Connector for software upgrades and Media Play, etc. COMMON INTERFACE Slot Insert CI (Common Interface) card into the slot. When not inserting CI CARD in some channels, Scrambled Signal is displayed on the screen. The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. When the channel information configuration has finished, the message Updating Completed is displayed, indicating that the channel list is now updated. You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it. Insert the CI-Card in the direction marked on it. The place of the COMMON INTERFACE Slot may be different depending on its model. CAM is not supported in some countries and regions, check with your authorized dealer. The CI+ function is only applicable to LE********P. If you have some problems, please contact to service provider.

Plug & Play

Select the OSD Language. Menu Language : English

E Enter

Press the ENTERE button at any time to interrupt the memorization process.

BN68-01962L_Eng.indd 17

If you want to reset this feature.
Press the MENU button. Press the or button to select Setup, then press the ENTERE button. Press the ENTERE button again to select Plug & Play. Enter your 4 digit PIN number. The default PIN number of a new TV set is 0-0-0-0. If you want to change PIN number, use the Change PIN function.
Language Time Game Mode Child Lock Change PIN Parental Lock Subtitle : English : Off : On
The Plug & Play feature is only available in the TV mode.

Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.
Press the INFO button on the remote control. The TV will display the channel, the type of sound, and the status of certain picture and sound settings. Press the INFO button once more or wait approximately 10 seconds and the display disappears automatically.
Press the INFO button to viewing the information.

DTV Air

18:11 Thu 6 Jan
Unclassified No Detaild Information

Life On Venus Avenue

18:00 ~ 6:00

E Watch ' Information

BN68-01962L_Eng.indd 18

Viewing the Menus

Menu provides one button access for controlling your TV. It enables you to perform a variety of tasks intuitively with a control panel on the screen rather than a variety of remote control button presses. MENU button Display the main on-screen menu. RETURN button Return to the previous menu. EXIT button Exit the on-screen menu.
ENTERE / Direction button Move the cursor and select an item. Select the currently selected item. Confirm the setting.

Operation the Menu

The access step may differ depending on the selected menu.
Press the MENU button. The menu is displayed on the screen. Press the or button to select one of the icons. Press the ENTERE button to access the icons sub-menu. Press the or button to move to items in the menu. Press the ENTERE button to enter items in the menu. Press the /// button to change the selected items. Press the RETURNR button to return to the previous menu. Press the EXITe button to exit from the menu.

Programmed

Shows all current reserved programmes. Select a channel in the All Channels, Added Channels or Favourites screen by pressing the / buttons, and pressing the ENTERE button. Then you can watch the selected channel.
Using the Colour buttons with the Channel List
Red (Channel Type): Toggle between your TV, Radio, Data / Other and All. Green (Zoom): Enlarges or shrinks a channel number. Yellow (Select): Selects multiple channel lists. You can perform the add/delete or add to favourites/ delete from favourites function for multiple channels at the same time. Select the required channels and press the Yellow button to set all the selected channels at the same time. The c mark appears to the left of the selected channels.
TOOLS (Tools): Displays the Delete (or Add), Add to Favourite (or Delete from Favourite), Lock (or Unlock), Timer Viewing, Edit Channel Name, Edit Channel Number, Sort, Select Al (or Deselect All), Auto Store menu. (The Options menus may differ depending on the situation.)
Channel List Option Menu (in All Channels / Added Channels / Favourites)
Press the TOOLS button to use the option menu. Option menu items may differ depending on the channel status.
Channel Status Display Icons A: An Analogue channel. c: A channel selected by pressing the Yellow button. *: A channel set as a Favourite. (: A programme currently being broadcast. \: A locked channel. ): A reserved programme

UKTV Gold UKTV style

All Channels

Add / Delete

You can delete or add a channel to display the channels you want. All deleted channels will be shown on All Channels menu. You can also delete a channel to the Added Channels or Favourites menu in the same manner.

A2 A3 A4 A6 A8 All A5 A7

C -C -C -C -C -C -C -C -Zoom
Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort
Add to Favourite / Delete from Favourite

Channel Type

Select T Tools
You can set channels you watch frequently as favourites. T Press the TOOLS button to display the Tools menu. You can also set the add to (or delete from) Favourite by selecting Tools Add to Favourite (or Delete from Favourite). The * symbol will be displayed and the channel will be set as a favourite. All favourite channels will be shown on Favourites menu.
A gray-coloured channel indicates the channel has been deleted. The Add menu only appears for deleted channels.

Lock / Unlock

You can lock a channel so that the channel cannot be selected and viewed. This function is available only when the Child Lock is set to On. (Refer to page 31) The PIN number input screen appears. Enter your 4 digit PIN number. The default PIN number of a new TV set is 0-0-0-0. You can change the PIN, by selecting Change PIN from the menu. The \ symbol will be displayed and the channel will be locked.
Only memorized channels can be reserved.

Timer Viewing

If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a programme, set the current time first. You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control. Reserving a programme will be shown in the Programmed menu. Digital Programme Guide and Viewing Reservation: When a digital channel is selected, and you press the button, the Programme Guide for the channel appears. You can reserve a programme according to the procedures described above.
Edit Channel Name (analogue channels only)
Channels can be labelled so that their call letters appear whenever the channel is selected. You can also edit the channel number by pressing the number buttons on the remote control.
Edit Channel Number (digital channels only) Sort (analogue channels only)
The names of digital broadcasting channels are automatically assigned and cannot be renamed.
This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.
Select All / Deselect All
Select All: You can select all the channels in the channel list. Deselect All: You can deselect all the selected channels.

Auto Store

You can only select Deselect All when there is a selected channel.
For detailed procedures on setting up options, refer to pages 19~20.
Channel List Option Menu (in Programmed)
You can view, modify or delete a reservation. Press the TOOLS button to use the option menu.

Change Info

Select to change a viewing reservation.
Cancel Schedules Information

Programmed

1 / 1 / 2008
Select to cancel a viewing reservation. Select to view a viewing reservation. (You can also change the reservation information.)

13:TV1 ) Change Info

18:59 20:59 21:59
Cancel Schedules 2 TV3 ) The Equalizer Information 2 TV3 ) McMillan & Wife Select All 2 TV3 ) M.Spillanes mike

Select All Channel Mode

Select all reserved programmes. When press the P >/< button, Channels will be switched within the selected channel list.
Select T Tools E Information

Added Ch.

Channels will be switched within the memorized channel list.

Auto Adjustment

Screen
Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment by selecting Tools Auto Adjustment.

BN68-01962L_Eng.indd 27

Sound Menu
Option Description Standard: Selects the normal sound mode. Music: Emphasizes music over voices. Movie: Provides the best sound for movies. Clear Voice: Emphasizes voice over other sounds. Custom: Recalls your customized sound settings. The sound settings can be adjusted to suit your personal preferences. Mode: Selects the sound mode among the predefined settings. Balance L/R: Adjusts the balance between the right and left speaker. 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies. Reset: Resets the equalizer settings to the default values. SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. You can change the default value for audio languages. Displays the language information for the incoming stream. While viewing a digital channel, this function can be selected. You can only select the language among the actual languages being broadcast. When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function. While viewing a digital channel, this function can be selected. The Audio Format appears according to the broadcasting signal. This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control the volume. Audio Description Turn the audio description function on or off. Volume You can adjust the audio description volume. Volume is active when Audio Description is set to On. While viewing a Digital channel, this function can be selected. Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. When you watch TV with it connecting to a Home theatre, turn the TV speakers off so you can listen to sound from the Home theatres (external) speakers. External Speaker: Used to listen to the sound of the External (Home Theatre) Speakers. TV Speaker: Used to listen to the sound of the TV Speakers.

Support menu

Support

Option Description Picture Test If you think you have a picture problem, perform the picture test. Check the colour pattern on the screen to see if the problem still exists. Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. Therefore, contact Samsungs call centre for assistance. No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external devices user manual. Sound Test If you think you have a sound problem, please perform the sound test. You can check the sound by playing a built-in melody sound through the TV. Does the problem still exist with this sound test? appears on the screen. Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. Therefore, contact Samsungs call centre for assistance. No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external devices user manual. Signal Information (digital channels only) Unlike analogue channels, which can vary in reception quality from snowy to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analogue channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. Samsung may offer upgrades for the TVs firmware in the future. These upgrades can be performed via the TV when it is connected to the Internet, or by downloading the new firmware from samsung.com to a USB memory device. Current Version is the software already installed in the TV. Alternative Software (Backup) shows the previous version that will be replaced. Software is represented as Year/Month/Day_Version. The more recent the date, the newer the software version. Installing the latest version is recommended. By USB Insert a USB drive containing the firmware upgrade downloaded from samsung.com into the TV. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete (the new version will have a higher number than the older version). When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.

00:00:04 / 00:04:04

I Love You HaHaHa

BN68-01962L_Eng.indd 41

Music Play Control Buttons

Button ENTERE TOOLS

Operations Play/Pause the music file. Play the music file Pause the music file Exit play mode and return to the music list. Run various functions from the Music menus.
Music Function Information Icon
p q When all music files in the folder (or the selected file) are repeated. Repeat Mode is On. When all music files in the folder (or the selected file) are played once. Repeat Mode is Off.

Playing the Music Group

Press the button to move to the Group List Section. Select a group using the and buttons. Press the (Play) button. The files of the selected group will start playing.
Select the files In the File List Section, contained the desired group. To move to the previous/next group, press the (REW) or (FF) button. Press the TOOLS button. Press the or button to select Play Current Group, then press the ENTERE button. The music files in the sorting group including the selected file are played.
Playing the selected Music Files
Press the button to select the File List Section. Press the or button to select the desired music file. Press the Yellow button. Repeat the above operation to select multiple music files. The c appears to the left of the selected music file. To deselect all selected files, press the TOOLS button and select Deselect All. Press the (Play)/ENTERE button. The selected files will be played.

Music Play Option Menu

Option Repeat Mode Picture Setting / Sound Setting Information Remove Safely Description
You can play music files repeatedly. You can configure the picture and sound settings. The music file information is displayed. You can remove the device safely from the TV.
Repeat Mode Picture Setting Sound Setting Information Remove Safely On

L Adjust

BN68-01962L_Eng.indd 42

2009-03-31 11:47:48

Using the Setup Menu
Setup displays the user settings of the Media Play menu.
Press the MEDIA.P button. Press the or button to select Setup, then press the ENTERE button. Press the or button to select the desired option. Press the or button to select the option. To exit Media Play mode, press the MEDIA.P button on the remote control.
Option Music Repeat Mode Screen Saver Run Time Information Remove Safely
Select to repeatedly play music files. Select to set the waiting time before the screen saver appears. Select to viewing the information of the connected device. You can remove the device safely from the TV.
Music Repeat Mode Screen Saver Run Time Information Remove Safely

On 4 hours

U Move L Adjust R Return

BN68-01962L_Eng.indd 43

Anynet+
Connecting Anynet+ Devices

What is Anynet+?

Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TVs remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.

To connect to a TV

TV Anynet+ Device 1 Anynet+ Device 2 Anynet+ Device 3 Anynet+ Device 4

HDMI 1.3 Cable

Connect the HDMI IN (1, 2, 3 (DVI) or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.
To connect to Home Theatre
TV Home Theatre Anynet+ Device 1
Optical Cable HDMI 1.3 Cable Anynet+ Device 2 Anynet+ Device 3 Anynet+ Device 4
Connect the HDMI IN (1, 2, 3 (DVI) or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theatre. When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home Theatres Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV. Connect only one Home Theatre. You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions. Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status. Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type. Anynet+ supports up to 3 devices simultaneously.

BN68-01962L_Eng.indd 44

Setting Up Anynet+

Option Setup Description

Anynet+ (HDMI-CEC) To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. Auto Turn Off Setting an Anynet+ Device to turn Off automatically when the TV is turned Off. The active source on the TV remote must be set to TV to use the Anynet+ function. If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off.

Application

Media Play (USB)

Anynet+ (HDMI-CEC)

Anynet+ (HDMI-CEC) Auto Turn Off : On : Yes

Teletext information is often divided between several pages displayed in sequence, which can be accessed by: Entering the page number Selecting a title in a list Selecting a coloured heading (FASTEXT system) Teletext level supported by the TV is version 2.5 which is capable of displaying additional graphics or text. Depending upon the transmission, blank side panels can occur when displaying Teletext. In these cases, additional graphics or text is not transmitted. Older TVs which do not support version 2.5 are not capable of displaying any additional graphics or text, regardless of the Teletext transmission.
Press the TV button to exit from the Teletext display.

BN68-01962L_Eng.indd 49

2009-03-31 11:47:50
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
First, click on Control Panel on the Windows start menu. When the control panel window appears, click on Appearance and Themes and a display dialog-box will appear. When the control panel window appears, click on Display and a display dialogbox will appear. Navigate to the Settings tab on the display dialog-box. The correct size setting (resolution) - Optimum: 1920 X 1080 pixels. If a vertical-frequency option exists on your display settings dialog box, the correct value is 60 or 60 Hz. Otherwise, just click OK and exit the dialog box.

Display Modes

If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesnt equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed on the next page, the screen image has been optimized during manufacturing.

D-Sub and HDMI/DVI Input

Mode IBM MAC VESA CVT Resolution 640 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1080p Horizontal Frequency (KHz) 31.469 31.469 35.000 49.726 68.681 35.910 53.783 44.772 56.456 75.231 31.469 37.861 37.500 37.879 48.077 46.875 48.363 56.476 60.023 67.500 63.981 79.976 49.702 62.795 60.000 47.712 55.935 70.635 65.290 52.500 74.620 67.500 Vertical Frequency (Hz) 70.086 70.087 66.667 74.551 75.062 59.950 59.959 59.855 74.777 74.857 59.940 72.809 75.000 60.317 72.188 75.000 60.004 70.069 75.029 75.000 60.020 75.025 59.810 74.934 60.000 60.015 59.887 74.984 59.954 70.000 70.000 60.000 Pixel Clock Frequency (MHz) 25.175 28.322 30.240 57.284 100.000 32.750 81.750 74.500 95.750 130.000 25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 108.000 108.000 135.000 83.500 106.500 108.000 85.500 106.500 136.750 146.250 89.040 128.943 148.500 Sync Polarity (H / V) +/-/+ -/-/-/-/+ -/+ -/+ -/+ -/+ -/-/-/+/+ +/+ +/+ -/-/+/+ +/+ +/+ +/+ -/+ -/+ +/+ +/+ -/+ -/+ -/+ -/+ -/+/+

WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

BN68-01962L_Eng.indd 53

Wiring the Mains Power Supply Plug (UK Only)
IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitabl y approved extension lead or consult your dealer for assistance. However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. IMPORTANT The wires in the mains lead are coloured in accordance with the following code: BLUE - NEUTRAL BROWN - LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows : The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED. WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.

Warranty Card

United Kingdom
This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned. In case of difficulty, details of our Authorised Service Centres are available from: Samsung Electronics U.K. Ltd. Customer Care Centre PO Box 17243 Edinburgh, EH11 4YB United Kingdom Tel: 0845 SAMSUNG (7267864) (UK & Northern Ireland) Tel: 100 (EIRE Only) Fax: +Web : www.samsung.com WARRANTY CONDITIONS 1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and is presented with the original invoice or sales slip or confirmation, and the serial number on the product has not been defaced. 2. Samsungs obligations are limited to the repair or, at its discretion, replacement of the product or the defective part. 3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres. No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such repair work will not be covered by this warranty. 4. This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to conform to national or local technical or safety standards in force in any Country other than the one for which the product was originally designed and manufactured.

BN68-01962L_Eng.indd 61

1. Source Code. The source code for a work means the preferred form of the work for making modifications to it. Object code means any non-source form of a work. A Standard Interface means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. The System Libraries of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A Major Component, in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The Corresponding Source for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the works System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. 3. Protecting Users Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the works users, your or third parties legal rights to forbid circumvention of technological measures. 4. Conveying Verbatim Copies. You may convey verbatim copies of the Programs source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to keep intact all notices. c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so.

doc1

Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

EIRE U.K

Customer Care Centre

SAMSUNG (7267864)

Web Site

www.samsung.com/ie www.samsung.com/uk

user manual

LCD TV
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model Serial No.

BN68-02315G-00

BN68-02315G-01Eng-Cover.indd 1

2009-06-08 11:13:56

English

Information on Use

Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen. Do not display a still image and partially still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as screen burn. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the brightness and contrast when displaying still images.
WARNINGS: Image retention, commonly known as screen burn-in, can occur on most types of television if the same image is displayed continuously. The most common causes of image retention are logos that remain stationary on the TV screen. These logos are common on many programmes received via a Set-top Box. To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast settings to decrease the intensity of the picture. Extended viewing of movies and programs in aspect ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour to avoid black borders top or bottom by using the zoom function. This will help eliminate the black borders and fit the picture to the entire area of the screen. Using a video game console may cause image retention and is not recommended. When using a PC input, avoid displaying still images for long durations and reduce the brightness or contrast settings to decrease the intensity of the picture. IMPORTANT: Image retention issues are not covered by your Samsung warranty.

Digital TV Notice

Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C(MPEG2 and MPEG4 AAC) cable- TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVBC is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video on Demand) and so on, are not included in this specification. So, they cannot be workable at this moment. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers. For more information, please contact your local Samsung customer care centre.

BN68-02315G-01Eng.indd 2

2009-06-08 11:00:08
Trademark & Label License Notice
TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Symbol

Note One-Touch Button TOOLS Button Press
2009 Samsung Electronics Co., Ltd. All rights reserved.

BN68-02315G-01Eng.indd 3

Contents

Getting Started

6 Installing the Stand 6 Disconnecting the Stand 7 Installing the Wall Mount Kit 7 Assembling the Cables 7 Anti-Theft Kensington Lock 8 Securing the Installation Space 9 Securing the TV to the Wall 10 Accessories 11 Viewing the Control Panel 12 Viewing the Connection Panel 14 Connections 15 Installing Batteries in the Remote Control 16 Viewing the Remote Control
Speaker Select 29 Sound Reset

30 Setup Menu

Menu Language Time Broadcast Security General

34 Input Menu

34 Source List Edit Name

35 Support menu

Self Diagnosis Software Upgrade HD Connection Guide Contact Samsung

Basic Operation

17 Placing Your Television in Standby Mode 17 Plug & Play Feature 18 Viewing the Display

Media Play - USB Device

37 Connecting a USB Device 38 Using the Media Play Menu 38 Using the PHOTO (JPEG) List 40 Using the MP3 List 41 Using the Setup Menu

Using the Menus

19 Viewing the Menus 19 Channel Menu
23 Country Auto Store Manual Store Now & Next Guide / Full Guide / Default Guide Channel List Channel Mode Fine Tune

24 Picture Menu

24 Mode Backlight / Contrast / Brightness / Sharpness / Colour / Tint(G/R) Advanced Settings 25 Picture Options 27 Picture Reset Auto Adjustment Screen

28 Sound Menu

28 Mode Equalizer SRS TruSurround HD Audio Language Audio Format Audio Description Auto Volume

BN68-02315G-01Eng.indd 4

English Anynet+
42 Connecting Anynet+ Devices 43 Setting Up Anynet+ 45 Recording 45 Listening through a Receiver (Home Theatre) 46 Troubleshooting for Anynet+
43 Switching between Anynet+ Devices

Other Information

47 Teletext Feature 48 Using Your TV as a Computer (PC) Display 49 Troubleshooting: Before Contacting Service Personnel 50 Specifications Warning! Important Safety Instructions Wiring the Mains Power Supply Plug (UK Only) Warranty Card

BN68-02315G-01Eng.indd 5

Installing the Stand
Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to 32inch models only.
Attach your LCD TV to the stand. Two or more people should carry the TV. Make sure to distinguish between the front and back of the stand when assembling them. To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left of right sides of the TV.

BN68-02315G-01Eng.indd 13

Connections

OPTICAL (Digital)

Analog Audio connection

Using a Audio Cable

Normal

AUDIO (Analog)
Amplifier / DVD Home Theater

AUDIO IN

Digital Audio connection

Using an Optical Cable

Digital Audio System

OPTICAL

HD connection
Using anD-Sub Cable Using a HDMI Cable

HDMI OUT

Using HDMI/DVI Cable Using ana D-Sub Cable

AUDIO OUT DVI OUT

Using a D-Sub Cable Using a D-Sub Cable

AUDIO OUT PC OUT

BN68-02315G-01Eng.indd 14

2009-06-08 11:00:20

Installing Batteries in the Remote Control
Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. Make sure to match the + and ends of the batteries with the diagram inside the compartment. Replace the cover. Remove the batteries and store them in a cool, dry place if you wont be using the remote control for a long time. (Assuming typical TV usage, the batteries should last for about one year.) If the remote control doesnt work, check the following: Is the TV power on? Are the plus and minus ends of the batteries reversed? Are the batteries drained? Is there a power outage or is the power cord unplugged? Is there a special fluorescent light or neon sign nearby?
BN68-02315G-01Eng.indd 15

2009-06-08 11:00:21

Viewing the Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. The performance of the remote control may be affected by bright light. The product colour and shape may vary depending on the model.
Turns the TV on and off. Press to change the channel.
Selects the TV mode directly. (p. 34, 47)
Used to display Favourites channel Lists on the screen. (p. 22)
Press to increase or decrease the volume. Press to display information on the TV screen. (p. 18) Displays the main on-screen menu. (p. 19) Use to quickly select frequently used functions. Use to select on-screen menu items and change menu values. (p. 19) Displays the Channel List on screen. (p. 22) Alternately select Teletext, Double, or Mix. (p. 47) Sound effect selection. (p. 29) Use these buttons in the Media Play and Anynet+ modes. (: This remote can be used to control recording on Samsung recorders with the Anynet+ feature)

Backlight

U Move L Adjust E Enter

R Return

Advanced Settings
Only analogue TV, Ext., AV modes of the PAL system, you cannot use the Tint(G/R) Function. When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint(G/ R), the OSD will be adjusted accordingly. In PC mode, you can only make changes to Backlight, Contrast and Brightness. Settings can be adjusted and stored for each external device you have connected to an input of the TV. The energy consumed during use can be significantly reduced if the brightness level of the picture is lowered, which will reduce the overall running cost.
Black Tone Dynamic Contrast Gamma Colour Space White Balance Flesh Tone Edge Enhancement :0 : On

U Move E Enter R Return

: Off : Medium :0 : Native
BN68-02315G-01Eng.indd 24

2009-06-08 11:00:25

Option Description Gamma Changes the rate at which images ramp or fade from light to dark. Recommended for advanced users only. Colour Space Increases or decreases the visible colour range for red, green and blue. Recommended for advanced users only. Auto: The TV will choose the colour range that is closest to the range used during TV and movie production. Native: Displays the most enhanced, vibrant colours possible. White Balance You can adjust the colour temperature for more natural picture colours. R, G, B-Offset: Fine tunes the white balance, or colour temperature in dark areas by changing the individual values of R, G, B. Recommended for advanced users only. R, G, B Fine tunes the white balance, or -Gain: colour temperature in the light areas by changing the individual values of R, G, B. Recommended for advanced users only. Reset: Resets the colour space to the default values. Flesh Tone Adjusts the colour of flesh tones. Increasing the value creates a more reddish picture. Decreasing the value creates a more greenish picture. Edge Enhancement Increases or decreases the emphasis at object edges. xvYCC Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks. Colour Tone Selects a preset white balance, or colour temperature setting, to provide either a reddish or bluish hue, dependant upon your personal preference. Cool: Selects a white balance, or colour temperature with a bluish hue. Skin tones may have less warmth but whites will seem brighter. Recommended when watching normal TV broadcasting in a bright room. Normal: Selects the white balance, or colour temperature with a less bluish, more reddish hue. Suitable for most viewing environments and programs. Warm1, Warm2, Warm3: Selects a redder, warmer hue that more closely matches the setting on monitors used in the production of TV and movie content. Recommended when watching movie and dramatic TV content. The lowest setting is best used for black & white content.

The current time will appear every time you press the INFO button.

Sleep Timer

The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes). To cancel the Sleep Timer function, select Off.
Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually. The Antenna or cable must be connected in order to set the time automatically.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made. You must set the clock first. On Time Set the hour, minute, and activate / inactivate. (To activate timer with the setting youve chosen, set to Activate.) Off Time Set the hour, minute, and activate / inactivate. (To activate timer with the setting youve chosen, set to Activate.) Volume Set the desired volume level. Source TV / USB You can select the TV or USB device content to be played when the TV is turned on automatically. Select TV or USB. (Make sure that an USB device is connected to your TV.) Antenna (when TV / USB is set to TV) Select ATV or DTV. Channel (when TV / USB is set to TV) Select the desired channel. Music or Photo (when TV / USB is set to USB) Contents (when Source is set to USB) You can select a folder on the USB Device with music or photo files to be played when the TV turns on automatically. If the folder name is too long, the folder can not be selected. If the folder name to be configured by the Contents function is too long, it cannot be selected. Repeat Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. When Manual is selected, press the button to select the desired day of the week. Press the ENTERE button over the desired day and the c mark will appear. You can set the hour, minute and channel by pressing the number buttons on the remote control.
Press the TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools Sleep Timer.

Timer 1

On Time

Inactivate

Off Time

Volume

Contents TV ATV 1 Sun Mon Tue Wed Thu Fri Sat

Repeat

L Move U Adjust E Enter
When there is only one photo file in the USB, the Slide Show will not play.
Auto Power Off When you set the timer on, the TV will be eventually turned off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer on mode and prevents overheating, which may occur if a TV is on for too long time.
BN68-02315G-01Eng.indd 30

Broadcast

Subtitle
You can activate and deactivate the subtitles. Use this menu to set the Subtitle Mode. Normal under the menu is the basic subtitle and Hard of hearing is the subtitle for a hearing-impaired person. Subtitle Switches subtitles on or off. Mode Sets the subtitle mode. Subtitle Language Set the subtitle language. If the programme you are watching does not support the Hard of hearing function, Normal automatically is activated even though Hard of hearing mode is selected. English is the default in cases where the selected language is unavailable in the broadcast.

Child Lock
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by muting out video and audio. Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number. The default PIN number of a new TV set is 0-0-0-0. You can lock some channels in Channel List. Child Lock is available only in TV mode.
Parental Lock > Parental Rating
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by a 4-digit PIN (Personal Identification Number) code that is defined by the user. The Parental Rating item differs depending on the country. Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number. The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting Change PIN from the menu. When the parental ratings are set, the \ symbol is displayed. Allow All: Press to unlock all TV ratings. Block All: Press to lock all TV ratings.

Change PIN

You can change your personal ID number that is required to set up the TV. Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number. The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting Change PIN from the menu. If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to 0-0-0-0: POWER (Off) MUTE 4 POWER (On).
BN68-02315G-01Eng.indd 32
Restrictions on game mode (Caution) To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu. Game Mode is not available in regular TV, PC and Ext mode. If the picture is poor when external device is connected to TV, check if Game Mode is On. Set Game Mode to Off and connect external devices.

General

Game Mode
When connecting to a game console such as PlayStation or Xbox, you can enjoy a more realistic gaming experience by selecting game menu. If Game Mode is On: Picture mode is automatically changed to Standard and cannot be changed. Sound mode is automatically changed to Custom and cannot be changed. Adjust the sound using the equalizer. The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer settings to the factory defaults.

Energy Saving

This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the Energy Saving mode option to High to reduce eye fatigue as well as power consumption. If you select Picture Off, the screen is turned off and you can only hear the sound. Press any button to get out of Picture Off.

BN68-02315G-01Eng.indd 44

Recording

You can make a recording of a TV programme using a Samsung recorder.
Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC). Press the or button to select Recording Immediately and press the ENTERE button. Recording begins. When there is more than one recording device. When multiple recording devices are connected, the recording devices are listed. Press the or button to select a recording device and press the ENTERE button. Recording begins. When the recording device is not displayed select Device List and press the Red button to search devices Press the EXIT button to exit. You can record the source streams by selecting Recording: (device_name). Pressing the button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded. Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording devices users manual.
Listening through a Receiver (Home Theatre)
You can listen to sound through a receiver instead of the TV speaker.
Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMICEC). Press the or button to select Receiver. Press the or button to select On or Off. Press the EXIT button to exit. If your receiver supports audio only, it may not appear in the device list. The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV. When the receiver (home theatre) is set to On, you can hear sound output from the TVs Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theatre receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theatre receiver. If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure), the Speaker Select may be set to External Speaker when you turn the TV on again. (Refer to Page 28)

BN68-02315G-01Eng.indd 45

2009-06-08 11:00:35

Troubleshooting for Anynet+
Problem Anynet+ does not work. Possible Solution Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. Connect only one receiver (home theatre). Check if the Anynet+ device power cord is properly connected. Check the Anynet+ devices Video/Audio/HDMI 1.3 cable connections. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Check whether the TV remote control is in TV mode. Check whether it is Anynet+ exclusive remote control. Anynet+ doesnt work in certain situations. (Searching channels, Operating Media Play, Plug & Play, etc.) When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or turn your TV off and on again. Check if the Anynet+ Function of Anynet+ device is set on. Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to show the Anynet+ menu and select a menu you want. Select View TV in the Anynet+ menu. Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. Press P >/<, PRE-CH and FAV.CH to change the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.) You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. Use the remote control when the Anynet+ setting or switching to view mode is complete. You cannot use the play function when Plug & Play is in progress. Check whether or not the device supports Anynet+ functions. Check whether or not the HDMI 1.3 cable is properly connected. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Search Anynet+ devices again. You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may not support Anynet+ functions. If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure, please repeat the device scan. Check whether the antenna jack on the recording device is properly connected. Connect the optical cable between TV and the receiver.

I want to start Anynet+.

I want to exit Anynet+.
The message Connecting to Anynet+ device. appears on the screen. The Anynet+ device does not play. The connected device is not displayed.
The TV programme cannot be recorded. The TV sound is not output through the receiver.
BN68-02315G-01Eng.indd 46

Teletext Feature

Most television stations provide written information services via Teletext. The index page of the Teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons. For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. (reveal) Used to display the hidden text (answers to quiz games, for example). To display normal screen, press it again. (size) Press to display the double-size letters in the upper half of the screen. For lower half of the screen, press it again. To display normal screen, press it once again. (store) Used to store the Teletext pages. 4 Colour buttons (red/green/yellow/blue) If the FASTEXT system is used by a broadcasting company, the different topics covered on a Teletext page are colour-coded and can be selected by pressing the coloured buttons. Press one of them corresponding to the required. The page is displayed with other coloured information that can be selected in the same way. To display the previous or next page, press the corresponding coloured button. 5 / (Teletext on/mix) Press to activate Teletext mode after selecting the channel providing the Teletext service. Press it twice to overlap the Teletext with the current broadcasting screen. 6 : (exit) Exit from the Teletext display. (sub-page) Used to display the available sub-page. (page up) Used to display the next Teletext page. (page down) Used to display the previous Teletext page. (mode) Press to select the Teletext mode (LIST/ FLOF). If you press it in the LIST mode, it switches into the List save mode. In the List save mode, you can save Teletext page into list using the 8(store) button. ! 6 (index) Used to display the index (contents) page at any time while you are viewing Teletext. @ 9 (hold) Used to hold the display on a given page if the selected page is linked with several secondary pages which follow on automatically. To resume, press it again. # 7 (cancel) Used to display the broadcast when searching for a page.

VESA DMT

VESA GTF VESA DMT / DTV CEA
When using an HDMI / DVI cable connection, you must use the HDMI IN 3(DVI) jack. The interlace mode is not supported. The set might operate abnormally if a non-standard video format is selected. Separate and Composite modes are supported. SOG is not supported. Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080).
BN68-02315G-01Eng.indd 48

2009-06-08 11:00:36

Troubleshooting: Before Contacting Service Personnel
No sound or picture Check that the mains lead has been connected to a wall socket. Check that you have pressed the button on your set. Check the picture contrast and brightness settings. Check the volume. Normal picture but no sound Check the volume. Check whether the MUTEM button has been pressed on the remote control. Check the Speaker Select settings. On your computer check; Power, Signal Cable. The TV is using its power management system. Move the computers mouse or press any key on the keyboard. Adjust the colour settings. Check that the broadcast system selected is correct. Try to identify the electrical appliance that is affecting the set and move it further away. Plug your set into a different mains socket. Check the direction, location and connections of your aerial. This interference is often due to the use of an indoor aerial. Replace the remote control batteries. Clean the upper edge of the remote control (transmission window). Check the battery terminals. Check that the signal cable is firmly connected to the PC or video sources. Check that the PC or video sources are turned on. Check the maximum resolution and the frequency of the video adaptor. Compare these values with the data in the Display Modes. If Screen Fit is selected in some external devices, the damaged picture may appear in the corner of the screen. This symptom is caused by external devices, not TV. This appears when you press and hold the EXIT button for a while. The product settings are reset to the factory defaults. This is part of the products design and is not a defect.

Screen is black and power indicator light blinks steadily No picture or black and white picture Sound and picture interference Blurred or snowy picture, distorted sound Remote control malfunctions
Check signal cable. message is displayed On PC mode, Not Supported Mode. message is displayed The damaged picture appears in the corner of the screen The Resets all settings to the default values. message appears. You may see small particles if you look closely at the edge of the bezel surrounding the TV screen.
This TFT LCD panel uses a panel consisting of sub pixels (800) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
BN68-02315G-01Eng.indd 49

Specifications

Model Name Screen Size (Diagonal) Power Consumption Standby PC Resolution (Optimum) Sound (Output) Dimensions (WxDxH) Without Stand With stand Weight With Stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Stand Swivel (Left / Right) Model Name Screen Size (Diagonal) Power Consumption Standby PC Resolution (Optimum) Sound (Output) Dimensions (WxDxH) Without Stand With stand Weight With Stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Stand Swivel (Left / Right) LE40B550, LE40B551 LE40B553, LE40Binch <1W 1920 x 1080 @ 60 Hz 10W X X 79 X 626 mm 982 X 255 X 676 mm 18 kg 10C to 40C (50F to 104F) 10% to 80%, non-condensing -20C to 45C (-4F to 113F) 5% to 95%, non-condensing -20 ~ 20 LE32B550, LE32B551 LE32B553, LE32Binch <1W 1920 x 1080 @ 60 Hz 10W X X 77 X 524 mm 794 X 240 X 570 mm 13 kg 10C to 40C (50F to 104F) 10% to 80%, non-condensing -20C to 45C (-4F to 113F) 5% to 95%, non-condensing -20 ~ 20 LE46B550, LE46B551 LE46B553, LE46Binch <1W 1920 x 1080 @ 60 Hz 10W X X 79 X 706 mm 1116 X 275 X 770 mm 23 kg LE37B550, LE37B551 LE37B553, LE37Binch <1W 1920 x 1080 @ 60 Hz 10W X X 79 X 592 mm 917 X 255 X 658 mm 16 kg
Design and specifications are subject to change without prior notice. This device is a Class B digital apparatus. For the power supply and Power Consumption, refer to the label attached to the product.
BN68-02315G-01Eng.indd 50
Warning! Important Safety Instructions
Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

BN68-02315G-01Eng.indd 52
This product uses parts of the software from the Independent JPEG Group. This product uses parts of the software owned by the Freetype Project (www.freetype.org). This product uses some software programs which are distributed under the GPL/LGPL license. Accordingly, the following GPL and LGPL software source codes that have been used in this product can be provided after asking to vdswmanager@ samsung.com. GPL software: Linux Kernel, Busybox, Binutils LGPL software: Glibc, ffmpeg, smpeg, libgphoto, libusb, SDL
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers and authors protection, the GPL clearly explains that there is no warranty for this free software. For both users and authors sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program nonfree. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS 0. Definitions. This License refers to version 3 of the GNU General Public License. Copyright also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. The Program refers to any copyrightable work licensed under this License. Each licensee is addressed as you. Licensees and recipients may be individuals or organizations. To modify a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a modified version of the earlier work or a work based on the earlier work.

END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively state the exclusion of warranty; and each file should have at least the copyright line and a pointer to where the full notice is found. <one line to give the programs name and a brief idea of what it does.> Copyright (C) <year> <name of author> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu. org/licenses/>. Also add information on how to contact you by electronic and paper mail. If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode: <program> Copyright (C) <year> <name of author> This program comes with ABSOLUTELY NO WARRANTY; for details type `show w. This is free software, and you are welcome to redistribute it under certain conditions; type `show c for details. The hypothetical commands `show w and `show c should show the appropriate parts of the General Public License. Of course, your programs commands might be different; for a GUI interface, you would use an about box. You should also get your employer (if you work as a programmer) or school, if any, to sign a copyright disclaimer for the program, if necessary. For more information on this, and how to apply and follow the GNU GPL, see <http://www.gnu.org/licenses/>. The GNU General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. But first, please read <http://www.gnu.org/philosophy/why-not-lgpl.html>.

BN68-02315G-01Eng.indd 58
GNU Lesser General Public License (LGPL)
Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers and authors protection, the GPL clearly explains that there is no warranty for this free software. For both users and authors sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program nonfree. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS 0. Definitions. This License refers to version 3 of the GNU General Public License. Copyright also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. The Program refers to any copyrightable work licensed under this License. Each licensee is addressed as you. Licensees and recipients may be individuals or organizations. To modify a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a modified version of the earlier work or a work based on the earlier work. A covered work means either the unmodified Program or a work based on the Program. To propagate a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. To convey a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. An interactive user interface displays Appropriate Legal Notices to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion.

 

Tags

36 C-2 E2220N MYH-10 VGP-prsz1 Fostex 450 Photosmart 7550 CDN35 Pulsar 260 SB5120 SHR-7082P 200 DX JBL L46 ES-3833 Sigma DP1 Mansion Boss ME-8 KV-21FX20E SMT5600 Officejet 500 Nina BAR NV-GS27 Canon T50 WF-611STP F2380MX KD-SC900R DVD-R120 MF-FM33s2K ATA At7 Thinkpad 240 - MAP HT-P50 KDL-37EX403 HR2027 SPL 9000 Yamaha FB01 AND GO CF2002 120ED-QD AVR-770SD USG 2000 G2020HDA SF-R10 AVH-P6850DVD Furman AR15 CDX-GT230 Watch E87 Roland EP-7 Finisher MZ-42PZ14 S2210 CLP-115 1000SF KX-TG6413E GWB227yuqa AM1550 SC-PM46 DES-3526 Later EXP370 KX-F800 KH 2130 GR-DVL200 HT-DV50H KXR 60 FP-7uaps FM 65R BM 2000 IC-2410A-e-H PSC 1215 FP51G R-805X Station 3CFT-maya Technology Tree Ypt-210 Asus P535 Modelo 2010 Dvdr990-021 Bomber FLS472C M3820 BAR938HG 32S86BD Ekhbrd016AAV1 Aspire-1610 WRT160N DP372B-N PT-07910 Studio B-DEC 30 FX160 VGN-AW11m H MFC-7820N KDL-40P3020 UN55C6400RF Thermometer DFE-528TX Gz-mc500 Advance KF510

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101