BN68-01737A-ENG.indb 4

N Supported modes for HDMI / DVI and Component. 480i 480p HDMI / DVI 50Hz X X HDMI / DVI 60Hz X O Component O O

576i X X O

576p O X O

720p O O O

1080i O O O

1080p O O O

4 ANT IN - To view television channels correctly, a signal must be received by the set from one of the following sources: An outdoor aerial / A cable television network / A satellite network 5 S-VIDEO IN - Connect S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder. - Connect the audio cables to AV IN [R-AUDIO-L]. 6 COMMON INTERFACE SLOT - When not inserting CI CARD in some channels, Scrambled Signal is displayed on the screen. - The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. - When the channel information configuration has finished, the message Updating Completed is displayed, indicating that the channel list is now updated. N You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it. N Insert the CI-Card in the direction marked on it. N The place of the COMMON INTERFACE Slot may be different depending on its model. 7 WISELINK - Connect a USB mass storage device to view movies and photos and listen to music files. - You can connect to Samsungs network wirelessly using the Samsung Wireless LAN Adapter (Sold separately). 8 AV IN - Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the A/V device. 9 DIGITAL AUDIO OUT (OPTICAL) - Connect to a Digital Audio Component. N When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on the DVD player or Cable / Satellite Box directly to an Amplifier or Home Theater, not the TV. 0 EXT 1, EXT 2 Connector EXT 1 EXT 2 Video O O Input Audio (L / R) O O RGB O Output Video + Audio (L / R) Only TV or DTV output is available. Output you can choose.
- Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players. ! LAN - Connect a LAN cable to this port to connect to the Network. @ SERVICE - Connector for Service only. - Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your remote control. # KENSINGTON LOCK (depending on the model) - The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. - If you want to use a locking device, contact the dealer where you purchased the TV. - The location of the Kensington Lock may be different depending on its model.

Plug & Play Language Time Network Selection Cable Network Setup Child Lock Change PIN : On : Cable Wireless Network Setup

: English

Channel Control Storing Channels and channel

Country

Analogue Channel: You can change the country for analogue channels. Digital Channel: You can change the country for digital channels.

Channel

Auto Store Manual Store Full Guide Mini Guide Default Guide Channel List Channel Mode
N The PIN number input screen appears. Enter your 4 digit PIN number.

: Mini Guide : Added Ch.

English - 10

BN68-01737A-ENG.indb 10

2008-08-12 6:22:39

Auto Store

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. Digital & Analogue: Digital and Analogue channels. Digital: Digital channels. Analogue: Analogue channels. N Scans for all channels with active broadcast stations and stores them in the TVs memory. N If you want to stop Auto Store, press the ENTERE button. N The Stop Auto Store? message will be displayed. N Select Yes by pressing the or button, then press the ENTERE button. N If a channel is locked using the Child Lock function, the PIN input window appears.
Channel Fine Tune Signal Information

Manual Store

N Scans for a channel manually and stores it in the TVs memory. N If a channel is locked using the Child Lock function, the PIN input window appears.

Digital Channel

Manual store for digital channels. Channel: Set the Channel number using the , or number (0~9) buttons. Frequency: Set the frequency using the number buttons. Bandwidth: Set the bandwidth using the , or number (0~9) buttons. N When it has finished, channels are updated in the channel list. Manual store for analogue channel. Programme (Programme number to be assigned to a channel): Sets the programme number using the , or number (0~9) buttons. Colour System Auto / PAL / SECAM / NTSC4.43: Sets the colour system value using the or button. Sound System BG / DK / I / L: Sets the sound system value using the or button. Channel (When you know the number of the channel to be stored): Press the or button to select C (Air channel) or S (Cable channel). Press the button, then press the , or number (0~9) buttons to select the required number. N You can also select the channel number directly by pressing the number (0~9) buttons. TV VCR DVD STB N If there is abnormal sound or no sound, reselect the sound standard required. Search (When you do not know the channel numbers): Press the or button to start the search. The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen. Store (When you store the channel and associated programme number): Set to OK by pressing the ENTERE button. N Channel mode - P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode. - C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode. - S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.

LNA On / Off

If the TV is operating in a weak-signal area, the LNA (Low Noise Amplifier) function can improve the reception (a low-noise preamplifier boosts the incoming signal). N While viewing an Analogue channel, this function can be selected.
Using the Full / Mini Guide

Full Guide

Mini Guide DTV Cable 900 f tn Freshmen On Campus 2:00 - 2:30 2:10 Tue 1 Jun

2:00 2:30

903 903
No Detailed Information 2:00 - 3:00 f tn Freshmen O. Street Hypn. ITV Play Mint Extra Kerrang! Loaded Kiss Fresh 40 with Dynamite MC oneword The Distillery Smash Hits! Smash Hits! Sunday
3:00 - 4:00 No Information No Information Kisstory No Information

Information

DTV Cable 900 f tn Freshmen On Campus Street Hypnosis Booze Britain

Full Guide

Next Page

Mini Guide

+24 Hours
To. Watch a programme in the EPG list Exit the guide
Then. Select a programme by pressing the , , , button. Press the blue button If the next programme is selected, it is scheduled with the clock icon displayed. If the ENTERE button is pressed again, press the , button to select Cancel Schedules, the scheduling is canceled with the clock icon gone. View programme information Select a programme of your choice by pressing the , , , button. Then press the INFO button when the programme of your choice is highlighted. The programme title is on the upper part of the screen center. Please click on INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information. will be appeared if the summary is long. Toggle between the Mini Guide or Full Guide Press the red button repeatedly. In Full Guide Scrolls backwards quickly (24 hours). Press the green button repeatedly. Scrolls forwards quickly (24 hours). Press the yellow button repeatedly. In Mini Guide Display next page quickly. Press the green button. Display previous page quickly. Press the yellow button.

English - 12

BN68-01737A-ENG.indb 12

Managing Channels

Using this menu, you can Add / Delete or set Favourite channels and use the programme guide for digital broadcasts.

You can select the most comfortable colour tone to your eyes. N The adjusted values are stored according to the selected Picture mode. N Warm1 or Warm2 is only activated when the picture mode is Movie.
You can select the picture size which best corresponds to your viewing requirements. T Press the TOOLS button to display Tools menu. You can also set the size by selecting Tools Picture Size. Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio. 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size. 4:3: This is the default setting for a video movie or normal broadcasting. Just Scan: Use the function to see the full image without any cutoff when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are input. N Depending on the input source, the picture size options may vary. N The items available may differ depending on the selected mode. N In PC Mode, only 16:9 and 4:3 mode can be adjusted. N Settings can be adjusted and stored for each external device you have connected to an input of the TV. N Temporary image retention may occur when viewing a static image on the set for more than two hours. N Wide Zoom: Press the button to Select Position, then press the ENTERE button. Press the or button to move the screen up / down. Then press the ENTERE button. N Zoom: Press the button to Select Position, then press the ENTERE button. Press the or button to move the picture up and down. Then press the ENTERE button. Press the button to Select Size, then press the ENTERE button. Press the or button to magnify or reduce the picture size in the vertical direction. Then press the ENTERE button. N After selecting Just Scan in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing the or button. Use the , , or button to move the picture. Reset: Press the or button to select Reset, then press the ENTERE button. You can initialize the setting. N If you use the Just Scan function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function. N When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.
Screen Mode 16:9 / Wide Zoom / Zoom / 4:3
When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it. 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnify the size of the picture vertically on screen. 4:3: Sets the picture to 4:3 normal mode. N This function is available in Auto Wide mode. N This function is not available in PC, Component or HDMI mode. If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. N When the signal is weak, select one of the other options until the best picture is displayed. This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality. N DNIe (Digital Natural Image engine) DNIe This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIe technology will fit every signal into your eyes. N This function is not available in Movie and Standard mode.

TV Speaker External Speaker Video No Signal

Sound Select

When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
Main: Used to listen to the sound of the main picture. Sub: Used to listen to the sound of the sub picture.
T Press the TOOLS button to display Tools menu. You can also set the sound of the sub picture by selecting Tools PIP Sound Select.

Sound Reset

Reset All / Reset Sound Mode / Cancel: You can restore the Sound settings to the factory defaults.

English - 20

BN68-01737A-ENG.indb 20

Selecting the Sound Mode

You can set the sound mode in the Tools menu. When you set to Dual l ll, the current sound mode is displayed on the screen. Audio Type Mono Stereo Dual Mono Stereo Dual Dual 1 / 2 MONO STEREO MONO DUAL 1 DUAL 2 MONO MONO STEREO MONO DUAL 1 DUAL 2 Default Automatic change DUAL 1 Automatic change DUAL 1
Anynet+ (HDMI-CEC) Picture Size Picture Mode Sound Mode Sleep Timer SRS TS XT Energy Saving Dual l ll U Move : : : : : : Auto Wide Standard Custom Off Off Off Mono

A2 Stereo

NICAM Stereo

L Adjust

e Exit
N If the stereo signal is weak and an automatic switching occurs, then switch to the mono. N This function is only activated in stereo sound signal. It is deactivated in mono sound signal. N This function is only available in TV mode.
Function Description Configuring the Setup Menu

Language

You can set the menu language.

Child Lock On / Off

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by muting out video and audio. N Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number. N The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting Change PIN from the menu. N You can lock some channels in Channel List. (refer to page 13) N Child Lock is available only in TV mode.

Plug & Play

Language Time Network Selection Cable Network Setup Child Lock Change PIN Change PIN Parental Lock

: English : Cable

Wireless Network Setup : On

Change PIN

You can change your personal ID number that is required to set up the TV. N Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number. N The default PIN number of a new TV set is 0-0-0-0. N If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to 0-0-0-0: POWER (Off), MUTE, 8, 2, 4, POWER (On).

Subtitle

Teletext Language Preference Digital Text Light Effect Melody Entertainment Energy Saving PIP
: ---: Enable : Watching TV : Off : Off : Off

English - 25

BN68-01737A-ENG.indb 25

Network Connection

Network Connection - Cable
Cable Connection for a DHCP Environment
The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below. Since an IP address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them manually.

TV Rear Panel

The Modem Port on the Wall
External Modem (ADSL / VDSL / Cable TV)

1 LAN Cable

2 Modem Cable
1. Connect the [LAN] port on the rear panel of the TV and the external modem with a LAN Cable. 2. Connect the LAN port on the wall and the external modem with a Modem Cable.
You can connect the LAN via a Sharer (Router). IP Sharer

TV Rear Panel LAN Cable

LAN Cable
Modem Cable You can connect the LAN port and the TV directly depending on your network status. TV Rear Panel The LAN Port on the Wall
N The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer. N If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10 seconds and then try again. N For the connections between the external modem and the Sharer (Router), refer to the owners manual of the corresponding product. N You can connect the TV to the LAN directly without connecting it through a Sharer (Router). N You cannot use a manual-connection-type ADSL modem becaus;e it does not support DHCP. You have to use an automaticconnection-type ADSL modem.

English - 26

BN68-01737A-ENG.indb 26

2008-08-12 6:22:43

LAN Connection for Static IP Environment
The procedures to set up the network using a static IP address are described below. You have to manually enter the IP address, subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP).
TV Rear Panel The LAN Port on the Wall
1. Connect the [LAN] port on the rear panel of the TV and the LAN port on the wall using the LAN cable.
You can connect the LAN via a Sharer (Router). The LAN Port on the Wall IP Sharer TV Rear Panel

N The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer. N If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS. You must enter these values to complete the network settings. If you do not know the values, ask your network administrator. N For the information on how to configure and connect a Sharer (Router), refer to the owners manual for the corresponding product. N You can connect the TV to the LAN directly without connecting it through a Sharer (Router). N If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or static IP. N For the procedures to use a static IP address, ask your Internet Service Provider.
Network Connection - Wireless
You can connect to the network wirelessly through a wireless IP sharer.
TV Side Panel The LAN Port on the Wall Samsung Wireless LAN Adapter

Wireless IP sharer

1. Connect the Samsung Wireless LAN Adapter into the Wiselink terminal of the TV. N You must use the Samsung Wireless LAN Adapter(WIS-08BG) to use a wireless network. N The Samsung Wireless LAN Adapter is sold separately. Contact a Samsung Electronics agent or service center for purchasing. N To use a wireless network, your TV must be connected to a wireless IP sharer. N If the wireless IP sharer supports DHCP, you TV can use a DHCP or static IP address to connect to the wireless network. N You must use a wireless IP sharer that supports IEEE 802.11 B or IEEE 802.11G. N If the wireless IP sharer allows you to turn on / off the Ping connection function, turn it on. N Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported. N Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communications may fail. N When applying the security key for the AP (wireless IP sharer), only the following is supported. 1) Authentication Mode : WEP, WPAPSK, WPA2PSK 2) Encryption Type : WEP, TKIP, AES If you apply a security system other than the systems listed above, it will not work with the TV.

English - 27

BN68-01737A-ENG.indb 27

Select Access Point: You can select the IP sharer to use when using a wireless network.

N N N N

If a wireless Access Point is not in the Access Point list, press the Red button. When the connection is made, you will be returned to the screen automatically. If you selected an Access Point that requires security authentication, enter the security key. If you have selected an Access Point with a security authentication: - The Security Key input screen appears. - Enter the security key and press the ENTERE button. - Using the Remote Control Buttons on the Security Key Input Screen.
Cable Network Setup-Auto Setup
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured. Please check if the LAN cable is connected. (See page 26) 1. 2. 3. 4. Set Network Selection to Cable. Select Cable Network Setup. Set Internet Protocol Setup to Auto Setup. Select Network Test to check the network connectivity.

English - 28

BN68-01737A-ENG.indb 28
Cable Network Setup-Manual Setup
To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol (IP). Please check if the LAN cable is connected. (See page 27) 1. 2. 3. 4. Set Network Selection to Cable. Select Cable Network Setup. Set Internet Protocol Setup to Manual Setup. Set up IP Address, Subnet Mask, Gateway and DNS Server. N Press the number buttons on the remote control when you set the Network manually. 5. Select Network Test to check the network connectivity.
Wireless Network Setup-Auto Setup
The menu is activated only if the Samsung Wireless LAN Adapter is connected. (See page 27) If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured. The wireless IP sharer to be connected to this product must support DHCP. 1. 2. 3. 4. 5. Set Network Selection to Wireless. Select Wireless Network Setup. Set Internet Protocol Setup to Auto Setup. Select an AP through Select Access Point. Select Network Test to check the network connectivity.

Month : Jan Slide Show Date : Jan.01.2008 Play Current Group Color : Gray Composition : Delete Folder : P-other Favourites : Information

Play Current Group

Delete
Using this menu, you can delete the selected photo files.

Change Group

You can change the Color and Composition information of photo files. N The group information of the current file is updated and the file is moved to the new group. N To change the information of multiple files, select the files you want by pressing the yellow button.

English - 33

BN68-01737A-ENG.indb 33

2008-08-12 6:22:47

Information
The photo file information including the name, the size, the resolution, the date modified and the path is displayed. N You can view the information of photo files during a SlideShow using the same procedures. O Alternatively, select a photo from the photo list and press the INFO button to view the information.

Remove Safely

You can remove the device safely from the TV.
Viewing a Photo or Slide Show

Viewing a Slide Show

1. Press the or button to select the desired photo in the Photo list. 2. Press the TOOLS button. 3. Press the or button to select Slide Show, then press the ENTERE button. N All files in the photo list will be used for the Slide Show. N During the slide show, files are displayed in order from the currently shown file. N The Slide Show progresses in the order sorted in the Photo list. N Music files can be automatically played during the Slide Show if the Background Music is set to On. (Refer to page 35).

Normal 20/22 image_1.jpg

440x440

2008/1/1

E Pause

Previous

Return
O While a photo list is displayed, press the (Play)/ENTERE button on the
remote control to start slide show.
N SlideShow Control Buttons ENTERE
Play/Pauses the Slide Show. Play the Slide Show. Pause the Slide Show.
Exit Slide Show and return to the photo list. Run various functions from the Photo menus. Change the SlideShow playing speed.

Playing current group

1. 2. 3. 4. Press the or button to select a sorting standard. (Monthly, Timeline, Color, Composition, Folder, Preference) Press the (REW) or (FF) button to select the desired group. Press the TOOLS button. Press the or button to select Play Current Group, then press the ENTERE button. N Only the photos in the sorting group including the selected files will be used for the Slide Show.

Screen Saver Run Time Off / 4 hour / 8 hour / 10 hour
Select to set the waiting time before the screen saver appears. Press the yellow button to select Setup in the Content Library main menu.

English - 49

BN68-01737A-ENG.indb 49
Using Additional Content Using External USB Memory Storage
You can download contents onto a USB memory device and play them on your TV. (The contents on the external USB device are played directly without being copied to the built-in Flash memory of the TV.)
Playing and Exiting New Content
1. Press the Red button in the Content Library main menu. N The USB Browser main screen is displayed. N A list of files saved on the USB device is displayed. 2. Press the or button to move to the file (or folder) you want to play. Press the ENTERE button. N The selected content is played. N Not support game program. N The use of contents is the same as in using the TV memory contents. N To return to the USB browser main screen, press the EXIT button. N To exit Content Library mode, press the P>/< button on the remote control. N Content Library only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.)

<< 1/1 >>

Cooking Gallery

Fitness Children

Downloading New Contents
New content other than the built-in contents will be provided via the Samsung. com website with or without charge.

Downloading Content

TV Memory

Show UDN

Visit the www.samsung.com website and open the Content Library page. Enter the product number (UDN, Unique Device Number) when it is asked. Select a content item in the Contents Download page. Download the contents onto the USB memory device. N Content Library only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.) 5. Go to Content Library main menu by pressing CONTENT button or choosing Content Library 6. Plug the USB memory into USB port on the side of the TV. 1. Insert the USB memory into the USB port on the side of the TV. 2. In the USB Browser main screen, press the Green button (Show UDN). 3. The 18-digit number on the screen is the product code. Additional contents are available on www.samsung.com.

1. 2. 3. 4.

Finding a product number (Unique Device Number, UDN)

Provided Content

English - 0

BN68-01737A-ENG.indb 50

2008-08-12 6:22:54
About Anynet+ Connecting Anynet+ Devices
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TVs remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.

News L Move R Return

GM turns 100 with focus on future E Enter Options Close
L Move R Return Options Politics Business News Entertainment Sports ESelect RReturn GM turns 100 with focus on future

English - 56

BN68-01737A-ENG.indb 56

Using the Stock Service

1. Press the INFO.L button on the remote control. 2. Press the or button to move to the Stocks service and press the ENTERE button. 3. Press the Red button while using the service to change the Stocks service option. 4. Press or button and select Stocks service option, then press the ENTERE button. N Stock quotes delayed at least 20 minutes. The time delay differs according to the region. N To exit the Stocks service, press the Blue button. N To exit the InfoLive service, press the EXIT button.
Favorite Stocks: The Favorite stock information is displayed. You can set

12/24 Mon 15:00 updated

Stocks
AAA $ 0.000,00 $ 0.000,00 +00,00% BBB $ 0.000,00 $ 0.000,00 - 00,00% CCC$ 0.000,00 $ 0.000,00 +00,00% DDD$ 0.000,00 $ 0.000,00 +00,00%
Quotes delayed at least 20 minutes. Brought to you by Yahoo! France.

Options

Favorite
Favorite Stocks Market Summary Stocks & News ESelect RReturn
up the Favorite Stocks by pressing the Yellow button. of up or down, and % are displayed. Financial news are displayed.
Market Summary: Major indices are toggled and the entire index, amount Stocks & News: The Favorite stock information and major indices and
Setting Favorite Stocks Items
1. Press the Yellow button when Favorite Stocks or Stocks & News is selected. 2. Press the or button to select the exchange market you want and press the ENTERE button. N The Set Favorite Stocks screen appears. 3. Press the , , or button to enter stock symbol. Then press the ENTERE button. N The search result appears. N Select the symbol input after checking the symbol contents of the newspaper or website. 4. Press the ENTERE button to set a favourite stock. N The selected stock is set as a Favorite Stock. N To delete your favourite stocks Press the Green button when Favorite Stocks or Stocks & News is selected. Press the or button to select a stocks, then press the ENTERE button. The c mark will disappear to the left of the stock name. Press the RETURN button.
AAA $ 0.000,00 $ 0.000,00 BBB $ 0.000,00 $ 0.000,00 CCC$ 0.000,00 $ 0.000,00 DDD$ 0.000,00 $ 0.000,00
+00,00% - 00,00% +00,00% +00,00%

Set Favorite Stocks

Select the exchange market. O London Stock Exchange

English - 64

BN68-01737A-ENG.indb 64
Troubleshooting: Before Contacting Service Personnel
No sound or picture Check that the mains lead has been connected to a wall socket. Check that you have pressed the button on your set. Check the picture contrast and brightness settings. Check the volume.
Normal picture but no sound
Check the volume. Check whether the MUTEM button has been pressed on the remote control. Check the Select Speaker settings. On your computer check; Power, Signal Cable. The TV is using its power management system. Move the computers mouse or press any key on the keyboard. Adjust the colour settings. Check that the broadcast system selected is correct. Try to identify the electrical appliance that is affecting the set and move it further away. Plug your set into a different mains socket. Check the direction, location and connections of your aerial. This interference is often due to the use of an indoor aerial. Replace the remote control batteries. Clean the upper edge of the remote control (transmission window). Check the battery terminals. Check that the signal cable is firmly connected to the PC or video sources. Check that the PC or video sources are turned on. Check the maximum resolution and the frequency of the video adaptor. Compare these values with the data in the Display Modes. If Just Scan is selected in some external devices, the damaged picture may appear in the corner of the screen. This symptom is caused by external devices, not TV. This appears when you press and hold the EXIT button for a while. The product settings are reset to the factory defaults. This is part of the products design and is not a defect.
Screen is black and power indicator light blinks steadily No picture or black and white picture Sound and picture interference Blurred or snowy picture, distorted sound Remote control malfunctions
Check signal cable. message is displayed On PC mode, Not Supported Mode. message is displayed The damaged picture appears in the corner of the screen The Resets all settings to the default values. message appears. You may see small particles if you look closely at the edge of the bezel surrounding the TV screen.
The TFT LCD panel uses a panel consisting of sub pixels (800) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

English - 65

BN68-01737A-ENG.indb 65

Specifications

Model Name Screen Size (Diagonal) PC Resolution (Optimum) Sound Output Dimensions (WxDxH) Body With stand Weight With Stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Stand Swivel (Left / Right) LE46Ainches 1920 x 1080 @ 60 Hz 10W x 160 X 108 X 669 mm X 300 X 759 mm 31 kg 50F to 104F (10C to 40C) p10% to 80%, non-condensing -4F to 113F (-20C to 45C) 5% to 95%, non-condensing 0 LE55Ainches 1920 x 1080 @ 60 Hz 15W x 364 X 113 X 821 mm X 338 X 883 mm 41 kg

English - 67

BN68-01737A-ENG.indb 67
upload, post, email or otherwise transmit any Content that infringes any patent, trademark, trade secret, copyright or other proprietary rights (Rights) of any party; g. upload, post, email or otherwise transmit any unsolicited or unauthorised advertising, promotional materials, junk mail, spam, chain letters, pyramid schemes, or any other form of solicitation, except in those areas (such as shopping rooms) that are designated for such purpose; h. upload, post, email or otherwise transmit any material that contains software viruses or any other computer code, files or programs designed to interrupt, damage, destroy or limit the functionality of any computer software or hardware or telecommunications equipment; i. disrupt the normal flow of dialogue, cause a screen to scroll faster than other users of the Service are able to type, or otherwise act in a manner that negatively affects other users ability to engage in real time exchanges; j. interfere with or disrupt the Service or servers or networks connected to the Service, or disobey any requirements, procedures, policies or regulations of networks connected to the Service; k. intentionally or unintentionally violate any applicable law or regulation including, but not limited to, regulations promulgated by any securities exchange; l. stalk or otherwise harass another; or m. extract, collect, process, combine or store personal data about other users. You acknowledge that Yahoo! has no obligation to monitor Content. Yahoo! and its designees shall have the right (but not the obligation) in their sole discretion to refuse, move or remove any Content that is available via the Service that violates the TOS or is otherwise objectionable. You agree that you must evaluate, and bear all risks associated with, the use of any Content, including any reliance on the accuracy, completeness, or usefulness of such Content. You agree that Yahoo! may access, preserve, and disclose your account information and Content: (a) to its affiliated companies worldwide for the purpose of providing the Content to you in an efficient manner; (b) for the purpose of properly administering your account in accordance with the standard operating procedures of Yahoo! or its affiliated companies; and (c) if required to do so by law or in the good faith belief that any such access, preservation or disclosure is reasonably necessary to: (i) comply with legal process; (ii) enforce the TOS; (iii) respond to claims that any Content violates the rights of third-parties; (iv) respond to your requests for customer service; or (v) protect the rights, property, or personal safety of Yahoo!, its users and the public. You acknowledge that the technical processing and transmission of the Service, including your Content, may involve transmissions over various networks and changes to conform and adapt to technical requirements of connecting networks or devices. Yahoo! reserves the right to terminate your access to some or all parts of its Service if you withdraw your consent in this paragraph at any time. 7. SPECIAL ADMONITIONS FOR INTERNATIONAL USE Recognising the global nature of the Internet, you agree to comply with all local laws and rules regarding online conduct and acceptable Content. Specifically, you agree to comply with all applicable laws regarding the transmission of technical data exported from the United Kingdom, the United States and the country in which you reside (if different from the aforementioned). When you are on any international Yahoo! property, you are bound by the Terms of Service and applicable laws governing that Yahoo! property. 8. PUBLIC CONTENT POSTED TO YAHOO! (a) For purposes of the TOS, publicly accessible areas of the Service are those accessible by the general public. By way of example, a publicly accessible area of the Service would include public Yahoo! Groups, Yahoo! Answers and Yahoo! Message Boards, but would not include unlisted Yahoo! Groups or private Yahoo! communication services such as Yahoo! Mail or Yahoo! Messenger. You acknowledge that you are solely responsible for any personal data or information that you choose to disclose and make publicly accessible via the Service, and that under no circumstances will Yahoo! be liable in any way for the disclosure and public accessibility of such personal data or information. You acknowledge that any personal data or information (or any other Content) posted to publicly accessible areas may remain publicly accessible indefinitely. (b) With respect to Content you elect to post for inclusion in publicly accessible areas of Yahoo! Groups or that consists of photos or other graphics you elect to post to any other publicly accessible area of the Service, you grant Yahoo! a world-wide, royalty free and non-exclusive licence to reproduce, modify, adapt and publish such Content on the Service solely for the purpose of displaying, distributing and promoting the specific Yahoo! Group to which such Content was submitted, or, in the case of photos or graphics, solely for the purpose for which such photo or graphic was submitted to the Service. This licence exists only for as long as you elect to continue to include such Content on the Service and shall be terminated at the time you delete such Content from the Service. (c) With respect to all other Content you elect to post to other publicly accessible areas of the Service, you grant Yahoo! the royalty-free, perpetual, irrevocable, non-exclusive and fully sub-licensable right and licence to use, reproduce, modify, adapt, publish, translate, create derivative works from, distribute, perform and display such Content (in whole or part) worldwide and/or to incorporate it in other works in any form, media, or technology now known or later developed. 9. INDEMNITY You agree to indemnify and hold Yahoo! and its subsidiaries, affiliates, officers, agents, co-branders and other partners, and employees, harmless from any claim or demand, including reasonable attorneys fees, made by any third party due to or arising out of Content you submit, post to or transmit through the Service, your use of the Service, your connection to the Service, your violation of the TOS, or your violation of any rights of another. 10.NO RESALE OF SERVICE You agree not to reproduce, duplicate, copy, sell, resell or exploit for any commercial purposes, any portion of the Service, use of the Service, or access to the Service.