Shenzhen Jinyinda Technology Co., Ltd. Toner Cartridge Chip
Product code OEM code Color Yields Description (USD/pcs)
For Samsung Laser Toner Cartridge
JYD-SF4300 JYD-SF1641 JYD-SF315 JYD-SF1641CHIP JYD-SF2850D2 JYD-SF2850D5 JYD-SF560R JYD-SF3050D4 JYD-SF3050D8 JYD-SF1630D2 JYD-SF3470D4 JYD-SF3470D10 JYD-SF4725D3 JYD-SF4550 JYD-SF5530D4 JYD-SF5530D8 JYD-SF6320 JYD-SF2150D8 JYD-SF2150D10 JYD-SF2550D8 JYD-SF2550D10 JYD-SF2250D3 JYD-SF2250D5 JYD-SF3560D6 JYD-SF3560D12 JYD-SF4200D3 JYD-SF4720D3 JYD-SF4720D5 JYD-SF510K JYD-SF510C JYD-SF510M JYD-SF510Y JYD-SF300K JYD-SF300C JYD-SF300M JYD-SF300Y JYD-SF350K JYD-SF350C JYD-SF350M JYD-SF350Y JYD-SF600K JYD-SF600C JYD-SF600M JYD-SF600Y JYD-SF610K JYD-SF610C JYD-SF610M JYD-SF610Y SCX4300 ML1641 CLP-315 ML1641 CHIP ML-D2850DA ML-D2850DB SCX-560R ML-D3050DA ML-D3050DB ML-D1630DA ML-D3470DA ML-D3470DB SCX-D4725DA SCX-D4550DA SCX-D5530DA SCX-D5530DB SCX-6320 ML-2150DA ML-2150DB ML-2550DA ML-2550DB ML-2250DA ML-2250DB ML-3560DA ML-3560DB SCX-4200D3 SCX-4720D3 SCX-4720D5 CLP-510D7K CLP-510D5C CLP-510D5M CLP-510D5Y CLP-K300A CLP-C300A CLP-M300A CLP-Y300A CLP-K350A CLP-C350A CLP-M350A CLP-Y350A CLP-K600A CLP-C600A CLP-M600A CLP-Y600A CLP-K610A CLP-C610A CLP-M610A CLP-Y610A

Mainboard chip

Samsung SCX-4300
Mainboard module Samsung ML-1640/1641/2240/2241/2245(Latest version) Mainboard module Samsung CLP-310/315
BK BK BK BK BK BK BK BK BK BK BK BK BK BK BK BK BK BK BK BK BK BK BK BK BK BK C M Y BK C M Y BK C M Y BK C M Y BK C M Y
1.5K 2K 5K 3K 4K 8K 2K 4K 10K 3K 10K 4K 8K 8k 8K 10K 8K 10K 3K 5K 6K 12K 3K 3K 5K 7K 5K 5K 5K 2K 1K 1K 1K 4K 2K 2K 2K 4K 4K 4K 4K 5.5K 5K 5K 5K
Samsung ML-1640/1641/2240/2241/2245(new) Samsung ML-2850D/2851ND(CHNKOREXP(new) Samsung SCX-560/565 (CHNKOREXP(new) Samsung ML-3050/3051N/3051ND(CHNKOREXP (new)
Samsung ML-1630/1631/SCX4500/4501(CHNKOREXP(new)
Samsung ML-3470D/3471ND(CHNKOREXP(new) Samsung SCX-4725(CHNKOREXP(new) Samsung SCX- 4550/4551(CHNKOREXP(new) Samsung SCX-5530/5330N/5530FN (CHNKOREXP (new) samsung 6320 (CHNKOREXP(new) Samsung ML-2150(Universal) Samsung ML-2550(Universal) SAMSUNG ML-2250/2250G/2251N/2252W/2251NP/2255G (CHNKORKORGEXP Samsung ML-3560/3561N(CHNKOREXP Samsung SCX-4200(CHNKOREXP Samsung SCX-4720FN/4520 (CHNKOREXP
Samsung CLP-510(CHNKOREXP
Samsung CLP-300/300N/CLX-2160/3160N/3160FN (Dedicated for CHNKOREUREXP) and (Universal for EUREXP
Samsung CLP-350/350N(CHNKOREXP
Samsung CLP-600/600N (CHNKOREXP
Samsung CLP-610/660(CHNKOREXP

1 Page/Total 1 Pages

Programmer to reset CRUM-based chip S3CC921. General information. The programmer supports the following models: Xerox WorkCentre 3210/3220. Xerox Phaser 3140. Samsung SCX-4223F. Samsung SCX-4300. Samsung ML-2855/SCX-4824. Samsung SCX-4828. Samsung CLP-310/315. Samsung CLX-3170/3171. Samsung ML-1640/1641/1645/2240/2241/2245. Samsung ML-1910/1915/2525/2580/SCX-4600/4623/SP-650. Samsung ML-1660/1665/SCX-3200/3217. The program works with interfaces, COM and LPT. In the manufacture of adapters may be different scheme. We highly recommend these.COM.
This simple scheme. In order to secure the CRUM and port, we recommend the scheme to the protection of the chip SN74LS05DR. That the scheme for the LPT port. For the programmer is required +5 V supply voltage. We recommend you take it from the USB connector on your computer.
www.printer.ucoz.com Technical support. V0.10
Programmer to reset CRUM-based chip S3CC921. LPT.
Kind of ready made programmer for LPT. With proper software programmer will find attached a chip. No adjustment is not needed. Enough to choose the machine model. Principle of operation. Unfortunately overwrite the contents of the chip is not fully possible. The contents are divided into two zones. Programmable and not programmable. Counters toner and regional label is in the programmable area and their information can be changed. It is from this area working programmer. But the serial number is CRUM and progressbar does not overwrite the area. Changing the serial number of the data can not be a programmer. In addition the unit remembers the last set in his room CRUM. Therefore, we recommend that the principle of "chip on the circle." It is no secret that many have accumulated a certain amount is not necessary after firmware chip devices. We recommend their use. How it works: you take the cartridge CRUM, and placed in another cartridge CRUM and clears it. Thus, after the cartridge unit is confident that he has a new cartridge. Taken chip can be installed in another cartridge. This method eliminates the potential problems when using CRUM with one serial number. Since the device monitors the serial number in the CRUM, then when a certain number of pages printed CRUM blocked. It is this avoids a way to "chip in a circle." Should clarify a few facts. Chip in does not overwrite the area has a serial number, mark the end of the www.printer.ucoz.com Technical support. V0.10
Programmer to reset CRUM-based chip S3CC921. cartridge (lock), and data progressbar. The progress bar is an indicator of the level of toner based on the meter cartridge CRUM. Progressbar is involved or not in the printer, it depends on the firmware version of the device. Unfortunately the ability to change data progressbar not. It does not affect the operation of the device, but because of it sometimes zeroed cartridges installed in the printer does not always show 100%. In addition, after installing zeroed CRUM module in the printer that uses a progress bar, data from the progressbar added to the counter toner CRUM. Assume a progressbar was listed 70%, then the cartridge will be reset only by 70%. (0% +70% = 70%). But it does not interfere with the successful work of the unit. If the progress bar or counter Toner reaches 100% then CRUM record labels end of the toner. Unfortunately this chip is no longer used, but such cases are rare. The progress bar freezes at the first firmware, and if the counter has not reached 100%, it will not reach him. Consequently CRUM not locked. Method of use. The main button is a menu of brand unit (Chip Models) and a button reading and writing chip. Button Read Chip is read-only CRUM in order to reset it is not required. Simply press the Write Chip. Zeroing is done automatically.
Programmer to reset CRUM-based chip S3CC921.
If you experience a program error occurs without s3cc921.bin, it means that the program does not see the chip. The reason for this may serve as a faulty chip or an appropriate adapter. When properly connected, the program will automatically generate the appropriate file. This version is completely without Limit, does not require activation, requires no installation on your computer. At the moment this program is fully functional. However, you should assume that a manufacturer of devices will be able to make it impossible to re flash chips. Status bar.
The status bar is a line that eventually the use of the cartridge is filled with symbols A5. The status bar is not used in all vehicles and rather it depends on the firmware version. The status bar is not exactly apparatus SCX-3200 and ML1660. After the first use of the cartridge status bar partially filled. As a general rule it is not completely filled, it is due to the fact that the average filling the sheet is almost always a calculated 5%. After the first flash of the program status bar is frozen forever. Unfortunately this will not reset the cartridge is 100% and mounted in a cartridge unit will show it. However, the unit will operate without problems. If the device status bar is not enabled on this unit, the line status bar is completely filled with the symbols 00. In this case, the device is reset to 100%. From this it follows that if the transition to flash the chip on a new cartridge, it would freeze the status bar to 0%. Payment is recommended by the payment system Webmoney Z204385128948 E103175043412 or through Western Union. The latest version of these instructions is always here. http://www.printer.ucoz.com/s3/manual_eng.pdf Demo version of the program you can follow any responses to say here. The program has only the reading function. http://printer.ucoz.com/s3/demo_S3CC921.rar