Printer, Fax & MFP Product Guide

DigitAllperformance

MONOCHROME LASER PRINTERS

ML-1250

ML-1430

ML-1440

ML-1450

ML-1650

DigitAllvalue

Samsung Laser Printers

The Samsung Difference Samsung laser printers offer exclusive features designed to give you the best performance and ease-of-use while reducing overall cost of ownership. One-Touch Access Eliminate the need to page through menu after menu to find the functions you want. Samsung lets you do it with one touch. TonerSave Button With a single touch of a button you can extend the life of your toner cartridges by 40%. Reprint Button Reprint the last page of your print job, even if your computer is off or youre working on another task. Cancel Button Stop print jobs with the touch of a button. Compatibility Samsung printers are widely compatible. They support Windows, Macintosh and Linux operating systems. Networking Samsung makes it easy to network a workgroup or an entire department. Many Samsung laser printers are available with a PortThru NIC card and SyncThru network management software for full 10/100 Base-TX network compatibility. Add it all up and its easy to see. When it comes to features, performance, value and support, Samsung laser printers give you more.
This entry-level PCL 6 laser printer is the ideal choice for the small office environments. Product Specifications
General Print Technology Print Speed (ppm) Processor Duty Cycle (pgs/mo.) Memory (MB, Standard) Memory (MB, max.) Print Language, Standard Print Language, Optional laser MHz RISC 12,68 PCL 6 N/A
Our most cost-effective 15ppm printer, the ML-1430 is perfect for small and home offices.
The most affordable business class laser printer with a 270-sheet cassette and built-in USB and parallel ports.
Professional output and robust paper handling make the ML-1450 ideal for small workgroups.
With a 17ppm print speed, the ML-1650 provides a powerful solution for busy offices.
laser MHz RISC 12,8 GDI N/A
laser MHz RISC 12,68 PCL 6 PS 3
laser MHz PowerPC 40,144 PCL 6 PS 3
Resolution Print Resolution (dpi) Connectivity Connectivity, Standard Connectivity, Optional Paper Handling Input Capacity, Standard (tray 1, bypass) Input Capacity, Optional Output Capacity, Standard (face-down, face-up) Duplexing Supported OS Microsoft Windows Apple Macintosh MacOS Linux 95, 98, Me, NT 4.0, 2000, XP MacOS 8.6+ Redhat, Caldera, Debian, Mandrake, Slackware, Turbo Linux, Suse 95, 98, Me, NT 4.0, 2000, XP MacOS 8.6+ Redhat, Caldera, Debian, Mandrake, Slackware, Turbo Linux, Suse 95, 98, Me, NT 4.0, 2000, XP MacOS 8.6+ Redhat, Caldera, Debian, Mandrake, Slackware, Turbo Linux, Suse 95, 98, Me, NT 4.0, 2000, XP MacOS 8.6+ Redhat, Caldera, Debian, Mandrake, Slackware, Turbo Linux, Suse 95, 98, Me, NT 4.0, 2000, XP MacOS 8.6+ Redhat, Caldera, Debian, Mandrake, Slackware, Turbo Linux, Suse 150 + 1 N/A 100, 1 N/A 150 + 1 N/A 100, 1 N/A 270 + 250, 100 manual 550 + 250, 100 manual 550 + 250, 100 manual IEEE-1284 parallel, USB N/A IEEE-1284 parallel, USB, N/A IEEE-1284 parallel, USB N/A IEEE-1284 parallel, USB 10/100 Base-TX IEEE-1284 parallel, USB 10/100 Base-TX 1200 x x x x x 1200

Miscellaneous First Page Out (sec.) Standard Font (scalable, bitmap, PostScript (if installed) Acoustics (dB, printing, standby) Power Consumption (printing, sleep) Dimensions (inches, W x D x H) Weight (lbs.) Consumables Toner Part Number Toner Yield (pgs. @ 5%, std./starter) Accessories Second Paper Cassette Ethernet 10/100 Base-TX Network Card, Internal Postscript 3 Upgrade Memory Upgrade N/A N/A N/A Industry Standard Memory N/A N/A N/A N/A ML-6060S6/XAA (550 sheets) N/A N/A N/A ML-6060S6/XAA (550 sheets) ML-6100N3/XAR ML-6060XA/XAA Industry Standard Memory ML-1650S6/XAA (550 sheets) ML-00NA/XAA ML-00PA/XAA 32 MB: ML-00MB/XAA 128 MB: ML-00MD/XAA ML-1210D3/XAA 2,500/1,000 ML-1210D3/XAA 2,500/1,000 ML-6060D6/XAA 6,000/3,000 ML-6060D6/XAA 6,000/3,000 ML-1650D8/XAA 8,000/4,000 12.5 45, 1 46, 35 250, 10 Watts 13" x 13.9" x 9" 13.7 12.5 Windows fonts 46, 35 250, 10 Watts 13" x 13.9" x 9" 13.Windows fonts 48, 35 350, 12 Watts 14.3" x 16.1" x 9.8" 24.45, 1 (+ PS: 136) 48, 35 350, 12 Watts 14.3" x 16.1" x 11.6" 27.45, 1 (+ PS: 136) 49, 35 550, 20 Watts 14.3" x 16.1" x 11.6" 27.3
Note: Macintosh print resolution is limited to 600 dpi unless PostScript emulation is installed.
Note: Macintosh network printing requires 10/100 Base-TX card and PostScript emulation.

ML-1651N

ML-7300N
F A X / M U LT I - F U N C T I O N O F F I C E M A C H I N E S

SF-5100/5100P

SF-530/531P

Msys-6750

With its built-in network capabilities, the ML-1651N offers affordable, high-performance workgroup printing.
An ideal workgroup printer. The ML-7300N comes standard with network card, duplex printing and Adobe PostScript 3.
The SF-5100 is a plain paper laser fax. The SF-5100P laser fax includes printing and scanning capabilities. Product Specifications
Functions Print Fax Copy Scan Printer Specifications Print Technology Print Speed (ppm) Print Resolution (dpi) Print Language, Std. Connectivity, Std. Supported OS FAX Specifications Transmission Speed (Kbps, sec / pg.) 14.4, 6 ITU-T Group 3 MH/MR/MMR 5100: 1 MB, 5100P: 2 MB 300 x 300 dpi 10, min. no/yes for 5100P yes yes no/yes for 5100P 5100P only: laser GDI IEEE-1284 parallel 95, 98, Me, NT 4.0, 2000, XP
The SF-530 is an upscale fax with a 33.6Kbps modem. The SF-531P is a laser fax with scanning, printing and copy functions.
Ideal for high-volume use, this workhorse laser fax with copy function is well suited to handle demanding business applications.

laser 21 (10ppm duplex) 100 MHz PowerPC 100,144 PCL 6, PS 3 N/A
no/yes for 531P yes yes no/yes for 531P 531P only: laser GDI IEEE-1284 parallel, USB 95, 98, Me, NT 4.0, 2000, XP

no yes yes no

laser N/A N/A N/A N/A N/A

1200 x 1200

IEEE-1284 parallel, USB 10/100Base-TX N/A
IEEE-1284/100Base-TX IrDA, serial, LocalTalk
33.6, 3 ITU-T Group 3 MH/MR/MMR 2 MB, 160 pgs. 300 x 300 dpi 20, min.
14.4, 6 ITU-T Group 3 MH/MR/MMR 5 MB, 400 pgs. 300 x 300 dpi 38, days
FAX Compatibility Coding Method

550 + 250, 100 manual

500 + 250, n/a automatic, standard Storage Resolution Quick dialing (locations, 1 touch, speed dial) Battery Backup
95, 98, Me, NT 4.0, 2000, XP MacOS 8.6+ Redhat, Caldera, Debian, Mandrake, Slackware, Turbo Linux, Suse
Copy Specifications Resolution (scan, print) Copy Speed (cpm) Copy Reduction and Enlargement Scan Specifications Resolution (dpi, optical, enhanced) 300, 300 dpi 6 50-130% 5100P only: 200 CIS 6, N/A 300, 600 dpi 8 50-200% 531P only: 300 CIS 6, N/A N/A N/A N/A 300, 600 dpi 8 50-200%
14 45, 1 (+ PS: 136) 49, 35 550, 20 Watts 14.3" x 16.1" x 11.6" 27.4
12 45, 1, 136 52, 36 350, 34 Watts 16,8" x 17,6" x 11.8" 44.2
Type Bit-depth (bits, mono, color) Paper Handling Input Capacity, Std. (tray 1, bypass) Input Capacity, Opt. (2nd cassette) Output Capacity, Std. (face-down, face-up)
150, 1 N/A 0, SF-5100D3/XAR 1 piece cartridge 3,125
250, 1 N/A 0, SF-6800D6/XAR 1 piece cartridge 7,500
ML-1650D8/XAA 8,000/4,000
ML-7300DA/XAA 10,000/5,000
Automatic Document Feeder (sheets) Consumables Toner Type
ML-1650S6/XAA (550 sheets) ML-00NA/XAA ML-00PA/XAA 32 MB: ML-00MB/XAA 128 MB: ML-00MD/XAA
ML-7050S5/XAR (500 sheets) N/A N/A Industry Standard Memory
Life (@ 4%) toner, drum General Dimensions (inches, W x D x H) Weight (lbs.) Power Consumption (normal, sleep)
12.3" X 12.8" X 9,0" 16 150, 10 Watts
9.8 x 10.2" x 9.6" 30.5 164, 40 Watts

Msys-730

Msys-830

Msys-835P

SCX-5112

SCX-5312F

DigitAllusability
Samsung Fax and MultiFunction Office Machines
The Genius is in the Details We invite you to take a close look at our multi-function office solutions. Heres just some of what youll discover: TonerSave Button With the touch of a button, this exclusive Samsung feature can extend the life of a toner cartridge by 40%. PowerSave Button Reduces power consumption. PaperSave Button With our 2-up copy feature, you can copy two pages onto one sheet of paper and reduce your paper costs. TollSave Button (available on selected models.) This technology lets you delay transmission of stored documents to a time when phone rates are lowest, dramatically reducing telephone costs. Battery Back-Up Documents can be automatically stored in memory, even during a power outage, in case the fax machine runs out of paper. Dual Access Send or receive faxes while printing or copying at the same time. Quick Scan (selected models) Scans documents into memory in as little as 1.5 seconds, no more waiting for faxes to scan and send. Add up all the features and the conclusion is clear Samsungs advanced technology puts our multi-function office machines in a class by themselves.
This workhorse fax features a high-speed 33.6Kbps transfer rate, convenient copy functions and optional second cassette.
This high-volume fax has a 33.6Kbps modem, 1.5 sec. Quick Scan and an optional second line making it a perfect solution for your business.
In addition to a 33.6Kbps fax modem this high-volume multi-function fax also offers copy, scan and print capabilities.
Print. Scan. Copy. The SCX-5112 combines the functionality of three office machines into one compact unit.
This multi-function digital fax offers faxing, copying, printing and color scanning capabilities in one space-saving unit.

yes yes yes yes

yes no yes yes
laser simplex: 12; duplex: class PCL 6 IEEE-1284 parallel, USB 95, 98, Me, NT 4.0, 2000, XP
33.6, 3 ITU-T Group 3 MH/MR/MMR 5 MB, 400 pgs. 300 x 300 dpi 38, days
33.6, 3 ITU-T Group 3 MH/MR/MMR/JBIG 11 MB, 800 pgs. 300 x 300 dpi 50, hrs.
33.6, 3 ITU-T Group 3 MH/MR/MMR/JBIG 8 MB, 640 pgs. 300 x 300 dpi 50, hrs.
N/A N/A N/A N/A N/A N/A N/A
33.6, 3 ITU-T Group 3 MH/MR/MMR/JBIG 4 MB, 320 pgs. 300 x 300 dpi 40, hrs.

300, 600 dpi 8 50-200%

600, 1200 dpi class simplex: 12; duplex: 7 50-200%
600, 1200 dpi class simplex: 12; duplex: 7 Platen: 25-400%

N/A N/A N/A

300, 4800 CIS 8, 32

600, 4800 CCD 8, 32

250, 0, SF-6800D6/XAR 1 piece cartridge 7,500
550, 250, SCX-5312R2/XAA SCX-5312D6/XAA 2 piece toner and drum 7,500/15,000
550, 100 N/A 250, SCX-5312R2/XAA SCX-5312D6/XAA 2 piece toner and drum 7,500/15,000
9.8" x 10.2" x 9.6" 30.5 164, 40 Watts
21.5" x 17.7" x 15.5" 48.4 320, 19 Watts
22" x 17" x 18" 49.5 320, 35 Watts
22" x 17" x 18" 49.5 290, 35 Watts
or the highest quality output and trouble-free
operation be sure to use Samsung toner cartridges.
Visit www.samsungusa.com/printer for a full list of printer, fax, and multi-function product accessories including toner, network cards, and additional paper cassette trays.

1.800samsung

www.samsungusa.com/printer
Not just digitalSamsung DigitAll!
ile the Samsung ML-7300N under the heading of good things that come in small packagesyoull find a lot of printer in this little package
PC MAGAZINE: Top 10 Printers - Save Space with the Samsung ML-7300N Laser Printer; March 21, 2001 - By: M. David Stone
e cant find much about the ML-1450 that merits criticism.This nicely designed printer provides a greater paper capacity than any other model competing for the SOHO chart.
PC WORLD: Top 10 Printers A small-office laser printer from Samsung makes an impressive debut; June 2002
2002 Samsung Electronics America, Inc. Specifications and design are subject to change without notice. Non-metric weights and measurements are approximate. All brand, product, service names and logos are trademarks and/or registered trademarks of their respective manufacturers and companies. Printed in USA. PFMPG_6/02rev1

DigitAllcontacts

1.800.SAMSUNG www.samsungusa.com/printer

Shielded interface cables and I/O cords must be used for this equipment to comply with the relevant FCC regulations. Changes or modifications not expressly approved in writing by Samsung may void the users authority to operate this equipment.

IC COMPLIANCE NOTICE

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations of ICES-003. Cet appareil numerigue de la Classe B respecte toutes les exigences du Reglement ICES-003 sur le Materiel brouilleur du Canada.
EC Declaration of Conformity
We, SAMSUNG ELECTRONICS CO.,LTD #259, Gong Dan-Dong, Gumi-City, Kyung Buk, Korea declare sole responsibility that the
ML-7300, ML-7300N Laser Printer
meets the intent of Directive 89/336/EEC for Electromagnetic Compatibility and Low Voltage Directive 73/23/EEC. Compliance was demonstrated to the following specifications as listed in the official journal of the European Communities: Electro Magnetic Interference (EMI): EN 55022 Radiated, Class B EN 55022 Conducted, Class B EN 61000-3-2 Power Harmonics EN 61000-3-3 Voltage Fluctuations and Flicker EN 55024 EN EN EN EN EN EN EN - Electro Mangnetic Susceptibility (EMS) 61000-4-2 Electrostatic Discharge 61000-4-3 RF Electromagnetic Field 61000-4-4 Fast Transients 61000-4-5 Surges 61000-4-6 RF Common Mode 61000-4-8 Power Frequency Magnetic Field 61000-4-11 Voltage Dips and Interruptions

EN 60950-Safety

Safety information
Safety and Regulatory Listing for this printer. PRODUCT SAFETY USA & CANADA Evaluated by UL according to UL 1950 and CSA C22.2 No. 950 for C-UL EEC(Europe) IEC 60950/EN 60950(TUV GS Certification) CB IEC 60950 LASER SAFETY EEC(Europe) USA
HD 194. & EN CFR, Chapter 1, Subchapter J(CDRH Certified)
Replacing the fitted plug (UK Only)

Important

The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until you get another fuse cover from the people who sold you the machine. The 13 amp plug is the most widely used type in the UK. However, some buildings (mainly old ones) do not have normal 13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug.

Warning

If you cut off the moulded plug, get rid of it straight away. You cannot rewire the plug or you may get an electric shock if you put it into a socket. Important warning: You must earth this machine. The wires in the mains lead use the following colour code: Green and Yellow Blue Brown : Earth : Neutral : Live

I NTRODUCTION

Features and Model Descriptions

Your new Printer

Your new Laser Printer is designed for use in an office environment, providing such advantages as :

q q q q

Printing on both sides of paper High-quality, high-speed text and graphics printing Vast choice of paper types and sizes Full operating status and error messages on operator panel display On-screen feedback of the printing status Various printer menus

Printer Information

ML-7300
The ML-7300 comes equipped with 16MB RAM and one 500-sheet Tray1 as standard.

ML-7300N

The ML-7300N is equipped with network card (PortThru) as standard. Install the network printer driver (SyncThru) for network printing.

Main Features

This Laser Printer provides the following main features. Built in Duplex function which allows printing on both sides of the paper q Printing speeds of 21PPM(Pages Per Minute) for Letter-size paper q High-quality printing at a maximum resolution of 1200 DPI q Automatic paper feed with a capacity of up to 500 sheets q Wide range of paper sizes and weights q Expandable design - 500-sheet universal paper Tray - Memory(up to 208 MB) - Connectors for optional RS-232C/LocalTalk Card and Network Interface Card - Connector for optional Infrared Adapter

1.2 I NTRODUCTION

Printer Components

Front View

The following illustration shows the front view of your printer and indicates the various main elements.
Print prevention sensor Top output bin Multi-Purpose tray
(100-sheet, with extension) (It prevents the printer from printing when 250 sheets of paper are piled up on the top output bin).
Operator panel Power switch Tray1

(500-sheet, closed)

Top cover
Paper level indicator LSU cleaner
(When the top cover is opened)

Rear View

The following illustration shows the rear view of your printer and indicates the various main elements.
Rear cover Parallel interface connector

Power connector

Setting Up Your Printer
This chapter provides step by step information on setting up your printer. Topics included in this chapter are:
STEP 1: Unpacking Your Printer STEP 2: Installing Toner Cartridge STEP 3: Load Paper STEP 4: Connecting the Parallel Cable STEP 5: Connecting the AC Power Cord STEP 6: Testing the Printer! STEP 7: Setting Up the Printer Driver

setting for that menu item.
A value can be : A phrase or word that describes a setting. A numerical value that you can increase or decrease. An On or Off setting.

Overview of Printer Menu

PRINTING MENU
PAPER MP SIZE COPIES ORIENT TRAY T-MARGIN L-MARGIN DUPLEX AUTO CR WIDE A4 QUALITY

CONFIG MENU

EMUL SWITCH LOCKTRAY PWR SAVE AUTOCONT ECONO JAM RECV TONERLOW

JOB MENU

SRT MODE TIMEOUT DENSITY PAP.TYPE MENU CLR SMET DUP.TOP DUP.LEFT S-BIND L-BIND FUSER CLEAN

TEST MENU

SELFTEST DEMOPAGE

PCL MENU

FONTLIST TYPEFACE SYMBOL LINES PITCH PT.SIZE COURIER
Some menus are displayed only if a required option is installed. They are as follows. I/O MENU
If the serial/LocalTalk option card is installed in your printer

NETWORK MENU

If the Network card(PortThru) is installed in your printer

PS 3 MENU

BAUDRATE ROBU.XON
RESET NIC CFG NET TCP/IP CFG TCP DHCP CFG ADRS IP BYTE 1, 2, 3, 4 SM BYTE 1, 2, 3, 4 GW BYTE 1, 2, 3, 4 BOOTP RARP LPD APL TALK
NETWARE CFG NWAR AUTO EN_8023 EN_II EN_8022 EN_SNAP UPDATE BOOT SVR SV-IP B1 SV-IP B2 SV-IP B3 SV-IP B4 FACTORY DEFAULT PRINT NET CFG

FONTLIST PS.ERROR

3.4 U SING O PERATOR PANEL
Use the PRINTING MENU to define all settings relating to printer input and output, as well as the specific print materials you are using with your printer.

Values and Functions

If the TRAY menu is AUTO, MP, MANUAL A4(country specific), LEGAL, Letter(country specific), EXE, JIS B5, ISO B5, COM-10, MONARCH, DL, C5, POST A6, C6, FOLIO, A5, STS, A6 If the TRAY menu is 1ST A4(country specific), LEGAL, Letter(country specific), EXE, JIS B5, ISO B5, FOLIO If the TRAY menu is OPT A4(country specific), LEGAL, Letter(country specific), EXE, JIS B5, ISO B5, COM-10, MONARCH, DL, C5, FOLIO If the DUPLEX menu is not OFF(SHORT or LONG) A4(country specific), LEGAL, Letter(country specific), FOLIO

MP SIZE

If the DUPLEX menu is OFF A4(country specific), LEGAL, Letter(country specific), EXE, JIS B5,ISO B5, COM-10, MONARCH, DL, C5, POST A6, C6, FOLIO, A5, STS, A6 If the DUPLEX menu is not OFF (SHORT or LONG) A4(country specific), LEGAL, Letter(country specific), FOLIO
Notes: The PAPER SIZE setting identifies the default formatting size for each tray.
It is important to select the correct paper size from the menu when using trays.

COPIES

1 to 999 (1; Factory Default) The COPIES setting determines the number of copies printed for each page. The printer does not automatically collate the copies. For example, if you send three pages to print and set Copies to 2, the printer prints page1, page 1, page 2, page 2, page 3, page 3.

ORIENT

P : Portrait (Factory Default) L : Landscape The ORIENT setting determines how the printing is oriented on the page. P(Portrait) means the printing is parallel to the short edge of the paper. L(Landscape) means the printing is parallel to the long edge of the paper.

Portrait

Landscape
3.6 U SING O PERATOR PANEL
AUTO(Factory Default) 1ST MP OPT(If the optional cassette is installed) MANUAL The TRAY setting identifies the default paper tray. 1ST means that the printer feeds print material from Tray unless it is empty or opened. MP means that the printer feeds print material from Multi-Purpose tray unless it is empty or closed. Use the MANUAL selection when manually feeding envelopes or other print material through the Multi-Purpose tray. OPT is available only if the optional tray 2 is installed. See Optional Tray 2 on page F.17. Auto means that the printer feeds print material from the other tray when one tray is empty. If you are using the same size and type of print material in all the trays, the trays are automatically linked.

T-MARGIN

0.0 ~ 9.9 The T-MARGIN menu item lets you select the top margin of the print materials.

L-MARGIN 0.0~ 9.9

The L-MARGIN menu item lets you select the left margin of the print materials. DUPLEX OFF (Factory Default) LONG SHORT The printer can automatically print on both sides of paper. Use the OFF selection when printing on one side of a sheet of paper. For more information, see page 5.13.

LOCKTRAY

(If the optional tray 2 is installed and the SWITCH menu item is set to ON)
NONE (Factory Default) 1ST OPT MP The tray set to LOCKTRAY doesnt change. For example, if LOCKTRAY is set to MP, the tray is not switched to Multi-Purpose tray.
Use the JOB MENU to define all settings relating to print quality, as well as Menu clear. Item

SRT MODE

(Samsung Resolution Enhancement Technology)
ENHANCE (Factory Default) NORMAL GRAY Use the printers SRT(Samsung Resolution enhancement Technology) setting to produce print with smooth angles, curves, and edges. ENHANCE : Better Text Image GRAY : Better Photo Image

TIMEOUT

0~300 15(Factory Default) The TIMEOUT Setting determines the amount of time (in seconds) the printer waits before printing the last page of a print job that does not end with a command to print the page. When a print timeout occurs, the printer prints the data in the print buffer. 0 : No timeout.

DENSITY

LIGHT MEDIUM (Factory Default) DARK Lighten or darken the print on the page by changing the DENSITY setting. The MEDIUM setting usually produces the best results.
3.12 U SING O PERATOR PANEL

PAP.TYPE

NORMAL (Factory Default) THICK WET TRANSP. The PAP.TYPE setting lets you specify the type of print material installed in each tray. Select NORMAL if the printer material is plain paper. Select THICK if the printer material is thick paper, high cotton paper or envelopes. Select WET if printer material is thin paper(60g) and the air is humid. Select TRANSP. if printer material is transparencies. This value can only be selected if MP or manual has been selected from the Tray menu.

MENU CLR

When you select MENU CLR, the printer resets to the factory default setting for each menu item.
(Samsung Memory Enhancement Technology)
ON (Factory Default) OFF This setting makes the printer process more data by optimizing the memory. If the value is set to ON, the complex data can be processed.

DUP.TOP

5.0 (Factory Default) 0~9.9mm (In increments of 0.1) This item lets you select the top margin of the print materials when the Duplex menu item is set to Long.

DUP.LEFT

5.0 (Factory Default) 0~9.9mm (In increments of 0.1) This item lets you select the left margin of the print materials when the Duplex menu item is set to Long.

S-BIND

0 (Factory Default) 0~22mm (In increments of 1) This item lets you select the left margin for the binding when short edge duplexing.

L-BIND

0 (Factory Default) 0~22mm (In increments of 1) This item lets you select the left margin for the binding when long edge duplexing.

FUSER CLEAN

Select FUSER CLEAN if you notice random dirty spots on the back side of the paper. It cleans fuser contamination.

ROBU.XON

PS3 MENU

FONT LIST

Prints the font list showing all the fonts available for PostScript.

PS.ERROR

ON OFF (Factory Default) Determines what action the printer should take when an error occurs in PS interpreter. When set to OFF, the printer does not print error information when an error occurs in PS interpreter. When set to ON, the printer prints error information when an error occurs in PS interpreter.
This menu is only available if the Network option card is installed in your printer.

On Line

Enter/Cancel
Pressing Menu Pressing cycles forward or On Line/Continue backward
Pressing Item cycles Pressing Value cycles forward or backward forward or backward

Pressing Enter/Cancel

Pressing On Line/Continue

OFFLINE

RESET NIC
The PortThru card is reset

CFG NET

Select YES or NO

TCP/IP

Select ON or OFF for enabling

CFG TCP

Select ON or OFF for LPD printing

APL TALK

NETWARE
Select ON or OFF for IPX/SPX

CFG NWAR

Select YES or NO Select YES or NO or for upgrading Select Unix or Windows Select for Factory Default settings Select for test printing

UPDATE

BOOT SVR FACTORY DEFAULT PRINT NET CFG
3.18 U SING O PERATOR PANEL
The PortThru card is reset. CFG NET YES NO This menu item lets you configure network settings. TCP/IP ON OFF This menu item lets you enable TCP/IP. CFG TCP YES NO This menu item lets you configure TCP/IP. LPD ON OFF This menu item lets you print using LPD. DHCP CFG ADRS BOOTP RARP YES NO You can configure the print server for TCP/IP configuration parameters, DHCP, CFG ADRS, BOOTP, and RARP. When you enable TCP/IP protocol, you have to select one of the IP Address assignment methods, DHCP, CFG ADRS, BOOTP, RARP. In case of DHCP, RARP, BOOTP, you need to configure the server. In case of CFG ADRS, you have to enter the IP address, Subnet mask, Default Gateway manually. ON OFF When you set APL TALK to OFF, this PortThru can not be detected by Macintosh systems. NETWARE ON OFF You can configure the printer server for IPX/SPX configuration parameters, and FRAME. When you set it to ON, you may select the Frame Type.

CFG NWAR YES NO

This menu item lets you configure IPX/SPX configuration parameters. AUTO EN-8023 EN-II EN-8022 EN-SNAP ON OFF These items are the frame type for IPX/SPX protocol. You can select one of these. If you dont set any value, Auto(default value) which switches the frame types automatically is used. YES NO You need to set the server that provides the upgrade file. You can set it to UNIX or WINDOWS. After setting the server for update, you should reset the printer. The upgrade process will be completed. UNIX WINDOWS If you want to upgarde in UNIX System, please select UNIX. You have to store the file to be upgraded in temporary directory of UNIX system and configure MAC address, IP address, the file name and the file path in bootptab file. If you want to upgrade in WINDOWS System, please select WINDOWS. You have to enter the IP address of Windowss PC that has the upgrade file. FACTORY DEFAULT

a Press Item until SV-IP B1 appears on the display. b Press Value until 155 appears on the display. c Press Enter/Cancel. d Press Item until SV-IP B2 appears on the display. e Press Value until 213 appears on the display. f Press Enter/Cancel. g Press Item until SV-IP B3 appears on the display. h Press Value until 211 appears on the display. i Press Enter/Cancel. j Press Item until SV-IP B4 appears on the display. k Press Value until 12 appears on the display. l Press Enter/Cancel.
Reset printer and the firmware will be upgraded.
Notes: After the Completed. Network Card will start about 30secs
later message is displayed on SyncThru, click OK. It may take a few seconds to write the new file to Firmware. Normally 30 seconds is sufficient.
This chapter will help you understand what kind of paper you can use with the ML-7300 series printer and how to properly load paper in the different paper trays for the best print quality. Topics included in this chapter are: x Loading Paper - Using the Multi-Purpose Tray - Using the Manual Feed. - Letterhead/Prepunched Paper - Envelopes - Label - Transparencies

Loading Paper

Using the Multi-Purpose Tray
Multi-Purpose tray provides a convenient way to print envelopes, transparencies, or other type of media without having to unload the other tray.
To load paper in the Multi-Purpose tray, proceed as follows.
Pull the Multi-Purpose tray towards you.
Slide the length guide out toward you.

P RINT M EDIA

Flex the sheets back and forth to loosen them, then fan them.
Notes: Do not fold or crease the paper. Place the paper with the recommended print side face up.
Place the paper against the side of the Multi-Purpose tray with the recommended print side face up and the top edge going in first toward the printer as shown.
Adjust the paper guide to the size of the paper inserted by pushing the guide.

4.2 P RINT M EDIA

Using the Manual Feed
The Manual Feed feature allows you to print from the Multi-Purpose tray onto special media such as envelopes or letterhead. If the Tray menu item is set to Manual, the printer will print only from the Multi-Purpose tray. Manual Feed can be selected through the software or printer driver too.
1 Select Manual as the paper source.
Set the source item in the properties dialogue box to Manual. You can select Manual as the paper source by setting the Tray item using the operator panel menu.
2 Print your document. 3 Place a sheet of paper in the

Multi-Purpose tray.

4 Press continue key when you are

prompted.

Letterhead / Prepunched Paper
Special paper includes letterhead, prepunched, envelopes, labels, and transparencies. When printing letterhead and prepunched paper, it is important to load the trays with the correct orientation.

For Multi-Purpose tray,

Load the paper with the side-to-beprinted facing up, and the top, short edge toward the printer. Set the source item in the properties dialogue box to Manual or MP.
- To print continuously from Multi-Purpose tray, set the source item to MP. - To print a sheet of paper from Multi-Purpose tray, set the source item to Manual.

Printing Side(up)

For ALL other trays,
Load paper with the side-to-beprinted facing down, and the top, short edge toward you.

Printing Side(down)

4.4 P RINT M EDIA

Envelopes

Many types of envelopes can be printed from the Multi-Purpose tray. The types of envelopes are COM-10, MONARCH, DL, C5 and C6(60~90g/m2). The printer will automatically feed up to 10 envelopes. Printing performance depends on the construction of the envelope.

Printing information

Set margins at least 0.6inch(15mm) from the edge of the envelope. Always test a few sample envelopes before purchasing large quantities. Select THICK paper for better quality.

Envelopes guidelines

For best performance, use envelopes made from 75g/m2(20lb bond) paper. Do not use envelopes that : Are damaged in any way. Use metal claps, string ties, metal folding bars. Contain windows, holes, cutouts or embossing. Have exposed flap adhesive when the flap is in the sealed or closed position. For envelope specifications, see page Appendix A.4.

Loading envelopes

Open the Multi-Purpose tray. Pull out the extension.
Load up to 10 envelopes in the left side of Multi-Purpose tray with the side-to-be printed facing up, and the postage-end toward the printer.
Adjust the guide to touch the envelope stack without bending the envelopes.

ng Samsu

Set the source item in the properties dialogue box to Manual or MP.
Notes: Do not use an envelope curled
down side, refer to the figure.

(Side View)

4.6 P RINT M EDIA
Labels automatically feed from the Multi-Purpose tray or the other trays.

Using Windows PostScript Driver
If you want to use the PostScript driver provided with your system CD-ROM or diskettes to print a document, use the information in this Appendix. Topics included in this Appendix are: Installing PS Driver

Installing PS Driver

Important: You must have the CD(or diskette) for windows 95
or Windows 98 available for use.
You cannot use PS in Windows 3.1.
PPDs, in combination with the PostScript driver, access the printer features and allow the computer to communicate with the printer. An installation program for the PPDs is provided on the ML-7300 CD-ROM.
Notes: Installing the PostScript printer driver may require
the use of the operating system files on the original CD-ROM or diskette that came with your system. If you have a PostScript level 3 driver and want to use it, you must install the PostScript level 3 PPD which is also provided on the ML-7300 CD-ROM.
1 Before installing PPD files, make sure that the printer and
the PC are properly connected with parallel or optional network interface. For information on: Connecting with parallel interface, see page 2.8. Connecting with an optional network interface, see Appendix F, Network Option Card.
2 Insert the CD-ROM shipped with your printer into your
CD-ROM drive. If the CD-ROM drive does not automatically run: Select Run from the Start menu, and type x:\cdsetup.exe in the Open box (where x is the drive letter for the CD-ROM drive), then click OK.
U SING W INDOWS P OST S CRIPT D RIVER
3 When the opening screen appears,
select the appropriate language.
4 Click Install the Samsung Software-II on your

PC (PostScript).

5 Click on HaveDisk, click Browse, then choose:
for Windows 9x, x:\Eng(or the desired language code. See page 2.17)\ps\Win95_98\level 2. for Windows NT 4.0, x:\Eng(or the desired language code. See page 2.17)\ps\WinNT\level 2. for Windows 2000, x:\Eng(or the desired language code. See page 2.17)\ps\Win2000. where x is the drive letter for the CD-ROM drive, then click OK.
6 Follow the instructions on the screen to complete the

installation.

C.2 U SING W INDOWS P OST S CRIPT D RIVER
Selecting the Default Printer 1 Start Windows on your pc. 2 Select Start Settings Printers from the

Windows 95 task bar.

3 Double click the SAMSUNG ML-7300 PS

printer icon.

4 Select File Default Printer. 5 Print the document on your Samsung ML-7300 PS.
To set the PS driver features, proceed as follows 1 Double-click on the PS driver icon. 2 Select Printer Properties. 3 Select the required options.
Using the Printer on a Network
If you work in a networked environment, the printer can be shared by other users on the network. ML-7300N printer is a network printer and can be connected to the network via direct attachment to an external print server. This appendix provides information on the following topics: x About sharing the Printer on a Network x Setting Up a Locally Shared Printer x Setting Up a Network-Connected Printer

E.2 I NSTALLING S OFTWARE
7 If you have more than one disk, insert the next disk and
click Yes. Repeat this step for a third disk if necessary.
8 When the diskettes have finished copying, click Close in
the Copy to Floppy dialog box. Then click Exit in the SAMSUNG PRINTER SETUP dialog box.
The instructions to install PCL Printer Driver, PostScript Driver are same. Take the following steps:
1 Insert the first diskette (if the selected software diskettes
are more than one) which contains the desired installation software; PCL Printer Driver, PostScript Driver.
2 From the Start menu, select Run. 3 Type A:\setup.exe in the Open box and click OK.
(if your floppy drive is not A, substitute the correct letter).
4 Follow the on-screen instructions to complete the
Your printer is a full-featured laser printer that has been optimized to meet most of your printing needs. Recognizing that each user may have different requirements, however, Samsung makes several options available to enhance the printers capabilities. This appendix provides information on the following topics: x Precautions x Preparations x Closing The Printer Cover x Understanding the Printer Control Board x Printer Memory x Network Option Card (Installed in ML-7300N already) x Installing Serial/LocalTalk or Serial/IrDA option card x Serial/LocalTalk x Serial/IrDA x Optional Tray 2

Precautions

Disconnect The Power Cord
Never remove the printer control board while the printer is plugged in. To avoid the possibility of electrical shock, always disconnect the power cord when installing or removing ANY internal or external printer option.
Discharge Static Electricity
The control board and internal printer options (SIMM, Network interface) are sensitive to static electricity. Before installing or removing an internal option, discharge static electricity from your body by touching something metal, such as the metal back plate on any device plugged into a grounded power source. If you walk round before finishing the installation, discharge any static electricity again.

P RINTER O PTIONS

Preparations
Complete the following steps before you install the printer options.
1 Unplug the printer power cord. 2 Disconnect all cables from the back of the printer. 3
Remove the printer cover. a Open the rear cover. b Remove the two screws from the back of the printer. Save the screws.

c Grasp the cover

(as illustrated) and pull it firmly toward the rear of the printer until it stops.
d Remove the cover from the

printer.

e Remove the five screws from
the metal plate covering the control board.

f Remove the plate.

F.2 P RINTER O PTIONS
Closing The Printer Cover
When you have finished installing an Option, follow these steps.
1 Close the metal plate and tighten

all the screws.

2 Set the bottom of the cover onto
the printer. Make sure the bottom tabs on the cover fit into the corresponding slots in the printer. Rotate the cover up towards the printer. Slide the cover toward the front of the printer until it clicks into place.
3 Gently tighten all the screws.
Reconnect any interface cables and the power cord.
Understanding the Printer Control Board
If the printer cover is opened, you can see the printer control board as below.

ROM SIMM Connector

Network Card Connector Printer Memory Connector Serial/LocalTalk or Serial/IrDA Connector

F.4 P RINTER O PTIONS

Printer Memory
The printer memory option increases the printers dynamic random access memory (DRAM). Your printer was shipped with 16MB of standard printer Memory. You can install two printer memory options in your printer. Printer memory upgrade options available are 4, 8, 16, 32, 64 and 128MB.
Notes: Your machine recognizes only half of 8MB, 32MB and 128MB SIMMs
if installed in the slot CN 4.
DRAM SIMM Features for Upgrade - Speed(Access Time): 50nS - Refresh Time: 1K(1024 cycles/16 ms) / 2K(2048 cycles/32 ms) - The Method of refresh is CAS-befor-RAS refresh - Mode: EDO Type - Single +5V +/-10% power supply - The SDRAM does not support

CD-ROM(SyncThru)

For ML-7300 Series Network Brackets
Notes: Before installing the PortThru card to your printer,
you should attach one of the brackets above by using two screws provided according to the type of your printer model. You can check it with the picture of page F.9 which shows the attached bracket to the PortThru card for ML-7300 Series.

F.8 P RINTER O PTIONS

Installing Procedure
The network option card lets you connect the printer to a local area network(LAN).You can install one network option card in your printer.

Card Connector Points

RJ-45 Port(Ethernet 10/100 Base T network)
1 Before you install the network option card, follow steps
under preparations on page F.2.
2 Locate the card connector
on the printer control board.

Network card connector

Remove the two screws from the metal plate covering the opening for cable connector. Remove the plate.
4 Unpack the option card.
5 Align the connector on the card
with the connector on the printer control board. Push the card firmly into the connector until it is completely in place.
Result: The two connectors should fit

snugly together.

Gently tighten the screws to secure the card to the system board.
Continue with Closing the Printer Cover on page F.3.
Install the network printer driver(called SyncThru) provided on the CD-ROM. See Network Management Software Users Guide for installation.

F.10 P RINTER O PTIONS

Connecting a Printer to the Network
Use standard network cabling that is used for other network components. Make sure the printer is turned off before connecting the network cable to the port. Attach the twisted-pair network cable to the RJ-45 port (10/100 Base T) on the card.

Powering Up

1 Connect the printer power cable into a properly grounded electrical outlet. 2 Turn on the printer.
top green LED bottom green LED
The top green LED comes on when the cable is connected to the port on the Network Printer Card. After booting, the bottom green LED should blink irregularly and the top green LED should come on continuously. If the bottom green LED blinks regularly, turn on your printer again.
Installing Serial/LocalTalk or Serial/IrDA option card
Before you install the Serial/LocalTalk or Serial/IrDA option card, follow steps under Preparations on page F.2.
Locate the Serial/LocalTalk or Serial/IrDA connector on the printer control board.
Remove the single screw that fastens the metal plate covering the cable connector opening.

Remove the plate.

Insert the Serial/LocalTalk or Serial/IrDA option card into the option card slot.

F.12 P RINTER O PTION

Installing Serial/LocalTark or Serial/IrDA option card

7 Click the Select button in the Input Filter to access

filter setup.

8 Select Samsung Printer PCL 5e Compatible for the
Printer Type item. Then select the default resolution and paper size.
9 To save the setting, press the OK button. 10 In the Edit xxxx Entry window, press the OK button to
complete the printer driver installation.
11 You can find that the printer driver is added to the
driver window. Select Quit from the PrintTool menu.
G.2 U SING Y OUR P RINTER

Numeric

16MB RAM.1.2 21PPM.1.2 500-Sheet Tray.1.3
DEMOPAGE.3.15 DENSITY.3.12 Duplex.5.7, 5.13 Duplex JAM.7.5
Adhesive tape.2.2 AUTO CR.3.8 AUTOCONT.3.9
envelopes, print.4.5 error messages.7.5 Ethernet 10/100 Base T.F.11

BAUDRATE.3.17

Folio.2.7 Font Navigator.2.16 Front view.1.3
CD.2.12 CONFIG MENU.3.9 EMUL PWR SAVE AUTOCONT ECONO JAM RECV TONERLOW SWITCH LOCKTRAY Copies.5.3 COURIER.3.16 COVER OPEN.7.5
graphic mode.5.5 graphic tab.5.4
halftone, setting.5.5 hardware requirements.2.13

I NDEX

infrared adapter.F.15 I/O MENU.3.17
network interface install network card.F.8 set up a locally shared printerD.1 network menu.3.18 network problem.7.10

JOB MENU.3.12

option closing cover.F.3 memory SIMM.F.5 nwtwork option card.F.8 Optional Tray 2.F.17 preparations.F.2 serial/IrDA.F.15 serial/LocalTalk.F.14 orientation.5.3 overlay tab.5.9
Label, printing.4.7 Landscape.5.3 Linux.G.1 LocalTalk.F.12 LSU cleaner.6.6
Macintosh.B.1 Macintosh Problems.7.11 manual feed loading paper.4.3 paper source setting.5.3 memory, option.F.5 menu botton.3.2 MP size.3.5 multiple images.5.7 multi-purpose tray loading paper.4.1 paper soruce setting.5.3
paper acceptable size and capacities A.4 guidelines.A.5 specifications.A.4 supported type.A.5 paper orientation, setting.5.3 paper source, setting.5.3 paper tray change paper size in tray.5.3 load paper.2.5 optional tray 2.F.17

(continued)

rear paper guide.2.5 rear right guide.2.6 rear view.1.3 REDAY status message.3.3 resolution.5.5 ROM SIMM connector.F.4
paper type, setting.5.3 parallel, connection.2.8 PCL 6, Properties graphic tab.5.4 output tab.5.6 overlay tab.5.9 paper tab.5.2 printer tab.5.8 watermark tab.5.11 postscript emulation.C.2 install PPD file for Macintosh.B.1 power saver.3.9 power switch.2.10 print quality problem, solving.7.9 printer control board.F.4 printer driver.2.12 pcl 6 postscript.C.1 font navigator.2.16 linux driver.G.1 printer memory connector.F.4 printer menu.3.4 printer tab.5.8 printing menu.3.5 printing problem.7.8 PS3 menu.3.17
SELFTEST.2.11 Serial/LocalTalk connector.F.4 Serial/LocalTalk option card.F.12 setting up.2.12 software requirements.2.13 specifications paper.A.4 controller.A.1 enginge.A.2 paper handling.A.3 environment.A.3 package weight.A.3 SRT mode.5.5