MasterSet

SAMSUNG RESETTABLE CHIP SERIES

CHIP RESET DEVICE

DESIGNED, DEVELOPED, AND BUILT ENTIRELY BY
SUMMIT TECHNOLOGIES Reorder #XMSSAM

SUMMIT TECHNOLOGIES

MasterSet USB
SAMSUNG RESETTABLE CHIP SERIES RESET DEVICE

INDEX ITEM

OVERVIEW KIT CONTENTS SETUP SOFTWARE INSTALLATION RESET DEVICE SETUP STARTING THE PROGRAM MAIN MENU SCREEN CONNECTING TO THE CHIP 2150/2250 SERIES 510/6100 SERIES 6320/MP20 SERIES CHIP RESETTING HELP SCREEN RESET TROUBLESHOOTING ADDING RESET CREDITS TECHNICAL SUPPORT ERROR MESSAGES CONTACTING TECHNICAL SUPPORT 8 9
Copyright MasterSet, 2006

Page 2 of 21

OVERVIEW
The MasterSet USB system includes all equipment required to connect directly to a cartridge chip for resetting, when used with optional cables available. The MasterSet USB requires access to a PC with a USB port (either USB 1.0 or 2.0 supported) and a USB extension cable (supplied). The program will operate on systems running Windows 95/98, or XP. This reset device resets chips of the Summit Technologies SAMSUNG 2150 RESETTABLE CHIP family, including those for SAMSUNG, XEROX, DELL, AND TALLY-GENICOM series. Resetting changes both the chip type (ID) and the toner level status (to 100%). Each chip can be reset as needed. The reset cable for these is included in the kit. Summit Technologies SAMSUNG 2150 RESETTABLE CHIP family chips can be reset to be reused as any existing model. This reset device also resets OEM chips of the SAMSUNG CLP-510 family, including those for the SAMSUNG CLP-510, and the XEROX 6100 Black, Cyan, Magenta, and Yellow. The reset cable for these is optional. The MasterSet USB system includes a number of chip-reset credits. As each chip is reset, the counter will decrease the credits available. When additional resets are required, the reset codes will be provided to increase the number of resets available, in increments of 25 (order #XRCSAM). The following chart shows the Summit Technologies chip types presently supported. New models are constantly added, so they may not be listed here, but will show on your screen. Other models will be added based upon customer requirements. New models that are added are included in software upgrades. Please check our website at www.summitechnologies.com for upgrades.

Page 3 of 21

SAMSUNG RESETTABLE CHIP SERIES RESET DEVICE Supported Summit Technologies and OEM chip types:
ITEM 36 DESCRIPTION DELL 1600n High Yield DELL 1600n Low Yield SAMSUNG 2150/2151/2152 High Yield SAMSUNG 3560 High Yield SAMSUNG 3560 Low Yield SAMSUNG 6320 High Yield SAMSUNG CLP510 Black High Yield SAMSUNG CLP510 Black Low Yield SAMSUNG CLP510 Cyan High Yield SAMSUNG CLP510 Cyan Low Yield SAMSUNG CLP510 Magenta High Yield SAMSUNG CLP510 Magenta Low Yield SAMSUNG CLP510 Yellow High Yield SAMSUNG CLP510 Yellow Low Yield SAMSUNG ml2550/2551/2552 High Yield SAMSUNG SCX-4200 SAMSUNG SCX-4720F High Yield SAMSUNG SCX-4720F Low Yield TALLY/GENICOM 9022/9022N High Yield TALLY/GENICOM 9025/9025N High Yield TALLY/GENICOM 9220/9220N High Yield XEROX 6100 Black High Yield XEROX 6100 Black Low Yield XEROX 6100 Cyan High Yield XEROX 6100 Cyan Low Yield XEROX 6100 Magenta High Yield XEROX 6100 Magenta Low Yield XEROX 6100 Yellow High Yield XEROX 6100 Yellow Low Yield XEROX MP20/C20 XEROX Phaser 3150 High Yield XEROX Phaser 3150 Low Yield XEROX Phaser 3420 High Yield XEROX Phaser 3450 High Yield XEROX Phaser 3450 Low Yield XEROX WorkCentre PE120 High Yield XEROX WorkCentre PE120 Low Yield CARTRIDGE 310-5417 310-5416 ML-2150D8/XAA ML-3560DB ML-3560D6 SCX-6320D8 CLP-510D5K CLP-510D2K CLP-510D5C CLP-510D2C CLP-510D5M CLP-510D3M CLP-510D5Y CLP-510D2Y ML2550DA/XAA SCX-D4200A SCX4720D5/XAA SCX4720D3/XAA MMT043376 MMT043361 MMT043320 106R00684 106R00679 106R00680 106R00676 106R00681 106R00677 106R00682 106R00678 106R01047 109R00747 109R00746 106R01034 106R00688 106R00687 109R00606 109R00601 CONVERSION YES YES YES YES YES YES NO NO NO NO NO NO NO NO YES YES YES YES YES YES YES NO NO NO NO NO NO NO NO YES YES YES YES YES YES YES YES RESET YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES CABLE REQD YASCBL2150 YASCBL2150 YASCBL2150 YASCBL2150 YASCBL2150 YASCBLSAM6320 YASCBLSAM510 YASCBLSAM510 YASCBLSAM510 YASCBLSAM510 YASCBLSAM510 YASCBLSAM510 YASCBLSAM510 YASCBLSAM510 YASCBL2150 YASCBL2150 YASCBL2150 YASCBL2150 YASCBL2150 YASCBL2150 YASCBL2150 YASCBLSAM510 YASCBLSAM510 YASCBLSAM510 YASCBLSAM510 YASCBLSAM510 YASCBLSAM510 YASCBLSAM510 YASCBLSAM510 YASCBLSAM6320 YASCBL2150 YASCBL2150 YASCBL2150 YASCBL2150 YASCBL2150 YASCBL2150 YASCBL2150

Page 4 of 21

KIT CONTENTS

AVAILABLE CABLES:

#YASCBL2150

#YASCBLSAM510

#YASCBLSAM6320
NOTE: ACTUAL ITEMS MAY BE SLIGHTLY DIFFERENT THAN SHOWN

Page 5 of 21

SETUP SOFTWARE INSTALLATION USING CD:
FOR WINDOWS APPLICATIONS (For use with Windows 95/98 or XP) Make sure the Masterset Reset Device is NOT plugged in: To Install for Windows 95/98 or XP Insert CD into CD drive. Program should self-start; if not, left-Click on Start, and select Run Select X:\setup.exe (where X is the letter of your CD drive). The Installation setup menu will appear Follow setup instructions on screen Remove CD

Page 6 of 21

SETUP continued RESET DEVICE SETUP
Connect one end of the USB cable to a USB port on the PC or laptop. Connect the opposite end of the USB cable to the jack on the MasterSet USB reset box:
Windows should recognize the new hardware, and display Found New Hardware. When asked, click on Choose location and use the browse feature to direct it to C:\Program Files\MastersetUSB\driver. If you select to have Windows locate the driver, it will bring back an error message.
Plug the connector end of the desired reset cable into the RJ-45 jack on the MasterSet USB reset box:

Page 7 of 21

To start the program:
Close all printer port capture programs, such as Lexmarks MarkVision. Close all other windows programs Double-click on the MSUSB Icon If installation is successful, you will get the menu screen on page 9 If Windows displays Found New Hardware. Use the Add Hardware Wizard. When asked, click on Choose location and use the browse feature to direct it to C:\Program Files\MastersetUSB\driver. IF YOU SELECT TO HAVE WINDOWS LOCATE THE DRIVER, IT WILL BRING BACK AN ERROR MESSAGE. The system is now ready for use.

Page 8 of 21

MAIN MENU SCREEN
NOTE TYPICAL SCREEN SHOWN YOURS MAY BE SLIGHTLY DIFFERENT
NOTE SHOWS HARDWARE IS CONNECTED AND ADAPTER IS IN PLACE. NOTE FOR SAMSUNG SERIES, THE ADAPTER TYPE IS I2C.
ERROR MESSAGE IF RESET CABLE IS NOT CONNECTED

Page 9 of 21

CONNECTING TO THE CHIP (2150/2550 and 2250 SERIES)
Removal of chip from the cartridge is not required. Align the contact pins on the cable connector with the contacts on the chip, as shown. The spring pins will go through the slots on the cartridge to engage the chip:

DELL 1600n High Yield DELL 1600n Low Yield SAMSUNG SCX-4720F High Yield SAMSUNG SCX-4720F Low Yield TALLY/GENICOM 9022/9022N High Yield XEROX Phaser 3150 High Yield XEROX Phaser 3150 Low Yield XEROX WorkCentre PE120 High Yield XEROX WorkCentre PE120 Low Yield

2250 STYLE CARTRIDGES

SAMSUNG 2150/2151/2152 High Yield SAMSUNG ML2550/2551/2552 High Yield TALLY/GENICOM 9025/9025N High Yield TALLY/GENICOM 9220/9220N High Yield XEROX Phaser 3420 High Yield XEROX Phaser 3450 High Yield XEROX Phaser 3450 Low Yield SAMSUNG 3560 High Yield SAMSUNG 3560 Low Yield
2150/2550 STYLE CARTRIDGES Gently press down on the connector head to compress the spring pins part way this assures proper contact for all four points.
NOTE: MasterSet USB will change a resettable chip to any in the series.

Page 10 of 21

CONNECTING TO THE CHIP (510/6100 SERIES)
Removal of chip from the cartridge is not required. The cable connector is designed to fit against the cartridge side and straddle the contacts. This aligns the contact pins on the cable connector with the contacts on the chip, as shown:
510/6100 CARTRIDGES Gently press down on the connector head to compress the spring pins part way this assures proper contact for all connections. Note that the head will align directly with the contacts on the side of the cartridge.
NOTE: MasterSet USB will reset any series of Samsung 510/6100 resettable chips, but only as the same model.

Page 11 of 21

CONNECTING TO THE CHIP (6320/MP20 SERIES)
Removal of chip from the cartridge is not required. The cable connector is designed to fit against the cartridge side and bottom and fit into the contacts. This aligns the contact pins on the cable connector with the contacts on the chip, as shown:
6320/MP20 CARTRIDGES Gently press down on the connector head to compress the spring pins part way this assures proper contact for all connections. Note that the head will align directly with the contacts on the side of the cartridge.
NOTE: MasterSet USB will reset any series of Samsung 6320/MP20 resettable chips, to any chip in the series.

Page 12 of 21

CHIP RESETTING
CHIP RESET MENU This describes the process to reset previously used, Summit Technologies SAMSUNG RESETTABLE CHIP series chips. The SAMSUNG RESETTABLE CHIP Series Reset Device will quickly reset these chips, and then run a verification process to ensure chip integrity. Resetting the 2150/2250/2550, and the 6320/MP20 chips will also change the ID. The 510/6100 series can be reset to the existing model only. Click on the drop-down arrow as shown:

Scroll down to the desired chip, or click directly on the desired chip type.

Page 13 of 21

Once selected, the desired chip type will be displayed on the chip status bar:
To reset the chip, connect the cable connector to the chip as outlined in the previous section Connecting to the Chip. While holding the connector to the chip, either: o press the button for 2 seconds or, o click ONCE on the Reset Chip button on the screen.

Page 14 of 21

The device will then reset the chip; while resetting, a status bar will show progress, and the display will show text confirming the chip is being reset:
If successful, RESET PASSED will appear in print in green letters, confirmation of chip identity is displayed, and one Reset Credit will be deducted from available credits.

Page 15 of 21

CHIP RESETTING Continued
If not successful, RESET FAILED will appear in red print; display will show reset status, and no reset credit is deducted.

Page 16 of 21

HELP SCREEN
For assistance in using the reset box, click on the HELP button. Continue clicking on the HELP button to cycle through the different images (sample shown):
2250 STYLE (Samples shown others in same family will be similar)
Copyright MasterSet, 2006 Page 17 of 21

HELP SCREEN - continued

2150/2550 STYLE
(Samples shown others in same family will be similar)

510/6100 STYLE

6320/MP20 STYLE
NOTE THE 510/6100 STYLE CAN BE RESET TO THE EXISTING MODEL ONLY.
Copyright MasterSet, 2006 Page 18 of 21

RESET TROUBLESHOOTING

Reset failures may occur for several reasons: o First, check to make sure all cable connections are securely plugged into the reset box o If multiple USB ports are available, make sure unit is plugged into the original USB port when installed. If not, it will have to be installed again on the new port. o Make sure the chip connector is properly aligned with the contact pads on the chip o Double-check that the reset head is oriented correctly, and not rotated 180 o Make sure to press the reset button on the switch once, and only for 2 seconds when resetting a chip. o If the operation still fails, it is likely that the chip has been damaged, either physically or from electrical discharge. Try another chip.

Page 19 of 21

ADDING RESET CREDITS
ADD CREDITS MENU 1. From the main menu screen, click on Add Credits button.
2. It is critical when ordering additional reset credits that the specific box serial number be included on the Purchase Order. Codes are specific for each box according to serial number; codes will not work on other boxes. 3. When you have your credit code ready to enter, add the nine digit code. The program is not case sensitive to upper or lower case. Then click OK. 4. Once complete, the main menu screen will display the quantity of credits that have been added. 5. IMPORTANT: The maximum capacity of the reset box is 225 resets. DO NOT add additional resets that will bring the total resets over 225, or the box memory will overflow and you will lose your credits. 6. If you were unsuccessful in entering a valid reset credit code, or wish to return to main menu, click on Cancel.

Page 20 of 21

TECHNICAL SUPPORT ERROR MESSAGES
If a problem occurs during the startup operation, the system will show an error message on the screen. The most common problem is a connection failure, either from the PC to the control box or from the control box to the chip. In any case, follow the screen instructions to fix the problem. Other problems may be from a defective chip. If all connections on the MasterSet USB are secure and connection with the PC is still not active, the PC will need to be rebooted.

TECHNICAL SUPPORT

If errors or problems still occur, Technical support is available at no charge on weekdays from 9 AM - 4 PM, Pacific Standard Time; please call (702) 454-6638 (US). If there are mechanical issues, replacement MasterSet USB devices are available for immediate shipment. Check our website at www.summitechnologies.com for new information.
NOTE: Brand and product names are trademarks of their respective companies. These are not Samsung, Xerox, Dell, or Tally-Genicom products. Use of the marks is for descriptive purposes only and is not intended to imply any affiliation or endorsement by the mark owner.

Page 21 of 21