V-Position Control Clear Menu Control Remote Control RGB Contrast Control RGB Brightness Control PIP On/Off Control Auto Adjustment Control Color Tone Control Color Temperature Control PIP Source Control Main-PIP Swap Control PIP Size Control PIP Locate Control Sound Select Control Auto Lamp Control Manual Lamp Control Safety Screen Control Video Wall Mode Control Safety Lock Panel Lock OSD On/Off P. Mode Control S. Mode Control NR Mode Set PC Color Tone Control Auto AutoAdjustment All Keys Lock SRS TSXT Control Film Mode Signal Balance SB Gain SB Sharpness Panel On Time Video Wall On Temperature Control Brightness Sensor
0x32 0x34 0x36 0x37 0x38 0x3C 0x3D 0x3E 0x3F 0x40 0x41 0x42 0x43 0x47 0x57 0x58 0x5B 0x5C 0x5D 0x5F 0x70 0x71 0x72 0x73 0x75 0x76 0x77 0x78 0x79 0x7A 0x7E 0x7F 0x83 0x84 0x85 0x86
0 ~ 0 ~ ~ ~ ~ 0 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 1
Dynamic Contrast Safety Screen On Video Wall User Control Model Name Control MagicNet PIP Panel On/Off
0x87 0x88 0x89 0x8A 0xE0 0xF9

0 ~ ~ ~ 1

Note : "-" indicates when the values to be set are multiple. See "4.1. Detailed Description of Commands" for details
4.1. Detailed Description of Commands

1) Status Control

Function The Computer shows the current settings for the TV/Monitor. Get Status Command Data Length 0x00 0
Ack Command Data Length 0xFF Val 3 Mute 9 Val 4 Input Ack/Nak 'A' Val 5 Aspect r-CMD 0x00 Val 6

N Time NF

Val 1 Power Val 7

F Time NF

Val 2 Volume Check Sum
Power : The Power Code for the TV / Monitor Volume : The Volume value for the TV / Monitor ( 0 ~ 100 ) Mute : The Mute Code for the TV / Monitor Input : The Input Source Code for the TV / Monitor Aspect : The Image Size Code for the TV / Monitor N Time NF : On Time On/Off value for the TV / Monitor F Time NF : Off Time On/Off value for the TV / Monitor
Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x00 Val 1 ERR Check Sum
ERR : Error Code that shows the type of the error that occurrederror that occurred. Check Sum Error Others

2) Time Control

Function The Computer controls the current the for the TV/Monitor Get Time Status Command Data Length 0x01 0
Set Time Command Data Length 0x01 Data 5

Data 1 AP Time

Data 2 H Time

Data 3 M Time

Data 4 0

AP Time 1 0

: The AM/PM value for the TV / Monitor AM PM
H Time : The Hour Value for the TV / Monitor ( 1 ~ 12 ) M Time : The Minute Value for the TV / Monitor ( 0 ~ 59 ) Ack Command Data Length 0xFF Val 3 M Time 7 Val Ack/Nak 'A' Val 5

6) Audio Control

Function The Computer controls the audio settings for the TV/ Monitor. Get Audio Status Command Data Length 0x05 0
Ack Command Data Length 0xFF Val 3 Balance 0x05 Check Sum Ack/Nak 'A' r-CMD 0x05 Val 1 Treble Val 2 Bass
Treble, Bass, Balance : Same as above Nak Header 0xAA Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x05 Val 1 ERR Check Sum
7) RGB Control (PC, BNC, DVI, MagicNet Only)
Function The Computer controls the screen settings of the TV / Monitor. Get Video Status Command Data Length 0x06 0
Ack Command Data Length 0xFF Val 3 0x0A Val 4 Ack/Nak 'A' Val r-CMD 0x06 Val 6 Val 1 Val 2
Contrast Brightness Val 7 Val 8 Check Sum
Red Gain Green Gain Blue Gain
Contrast, Brightness, Red, Green, Blue : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x06 Val 1 ERR Check Sum

8) PIP Status Control

Function The Computer shows the PIP settings for TV / Monitor. Get PIP Status Command Data Length 0x07 0
Ack Command Data Length 0xFF Val 6 Val Ack/Nak 'A' Check Sum r-CMD 0x07 Val 1 P.Size Val 2 P.Source
P.Size : The PIP size Value Code of the TV / Monitor 0x00 0x06 0x08 0x04 0x05 0x09 PIP Off Large Small Double 1 Double 2 Double 3
P.Source : The PIP Source Value Code of the TV / Monitor
Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x07 Val 1 ERR Check Sum

9) Maintenance Control

Function The Computer shows the maintenance setting of the TV / Monitor Get Maintenance Status Command Data Length 0x08 0
Ack Command Data Length 0xFF Val 3 P.Source Val 9 LMin_M Val 15 ScreenType 0x15 Val 4 LMax_H Val 10 LMin_AP Val 16 V.Wall Ack/Nak 'A' r-CMD 0x08 Val 5 LMax_M Val 11 LMinValue Val 17 V.WallFormat Val 1 Power Val 6 LMax_AP Val 12 LampValue Val 2 P.Size Val 7 LMaxValue Val 13 Val 8 LMin_H Val 14
ScreenInterval ScreenTime Val 19 V.WallSet

Val 18 V.WallDivid

Power : The Power Code for the TV / Monitor P.Size : The value code for the PIP Size of the TV / Monitor P.Source : The value code for the PIP Source of the TV / Monitor LMax_H : The value code for the Auto Lamp Max Time Hour of the TV / Monitor (1 ~ 12) LMax_M : The value code for the Auto Lamp Max Time Minute of the TV / Monitor (0 ~ 59) LMax_AP : The value code for the Auto Lamp Max Time AM/PM of the TV / Monitor LMaxValue : The value code for the Auto Lamp Max value of the TV / Monitor (0 ~ 100) LMin_H : The value code for the Auto Lamp Min Time Hour of the TV / Monitor (1 ~ 12) LMin_M : The value code for the Auto Lamp Min Time Minute of the TV / Monitor (0 ~ 59) LMin_AP : The value code for the Auto Lamp Min Time AM/PM of the TV / Monitor LMinValue : The value code for the Auto Lamp Min Value of the TV / Monitor (0 ~ 100, 0xFF) LampValue : The value code for the Manual Lamp Control value of the TV / Monitor (0 ~ 100, 0xFF) ScreenInterval : The value code for the Safety Screen Interval of the TV/Monitor(Per Hour, 0(Off) ~ 10) ScreenTime : The value code for the Safety Screen Time of the TV / Monitor (0(Off) ~ 5) ScreenType : The value code for the Safety Screen Type of the TV / Monitor (3 ~ 6) V.Wall : The value code for the Video Wall Mode of the TV / Monitor V.WallFormat : The value code for the Video Wall Format of the TV / Monitor V.WallDivid : The value code for the Video Wall Divider of the TV / Monitor V.WallSet : The value code for the Video Wall Set Number of the TV / Monitor Note : if LMinValue returns to 0xFF, it means Auto Lamp Control is in off mode If LampValue returns to 0xFF, it means Maunal Lamp Control is in off mode. Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x08 Val 1 ERR Check Sum

Power : The Power Code for the TV / Monitor Power ON Power OFF
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x11 Val 1 Power Check Sum
Power : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x11 Val 1 ERR Check Sum

14) Volume Control

Function The Computer changes the Volume level of the TV / Monitor Get Volume Status Command Data Length 0xVolume.
Set Volume Command Data Length 0xData 1 Volume
Volume : The Volume level value Code of the TV / Monitor ( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x12 Val 1 Volume Check Sum
Volume : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x12 Val 1 ERR Check Sum

15) Mute Control

Function The Computer turns the Mute of the TV / Monitor Get Mute ON/OFF Status Command Data Length 0x13 0
Set Mute ON/OFF Command Data Length 0xData 1 Mute
Mute : The Mute Code of the TV / Monitor Mute ON Mute OFF
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x13 Val 1 Mute Check Sum
Mute : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x13 Val 1 ERR Check Sum

16) Input Source Control

Function The Computer changes the Input Source of the TV / Monitor. Get Input Source Status Command Data Length 0x14 0
Set Input Source Command Data Length 0xData 1 Input
Input : The Input Source Code for the TV / Monitor 0x14 0x1E 0x18 0x0C 0x04 0x08 0x20 0x21 0x30 0x40 Note : TV/DTV Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x14 Val 1 Input Check Sum PC BNC DVI AV S-Video Component MagicNet HDMI TV DTV TV only
Input : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x14 Val 1 ERR Check Sum

17) Picture Size Control

Function The Computer changes the Aspect Ratio of the TV / Monitor screen. Get Picture Size Status Command Data Length 0x15 0
Set Picture Size Command Data Length 0xData 1 Aspect
Aspect : The Picture Size Code for the TV / Monitor PC, BNC, DVI 0x10 0x18 0x00 0x01 0x05 0x06 0x0B 16 : : 3 Auto Wide 16 : 9 Zoom 1 Zoom : 3
TV, AV, S-VIdeo, Component, HDMI
Note : Some Image Size may not available in input signal mode of 720p, 1080i Auto Wide Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x15 Val 1 Aspect Check Sum TV only
Aspect : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x15 Val 1 ERR Check Sum
18) Direct Channel Control(ATV, DTV Only)
Function The Computer controls the Channel of TV. Get Direct Channel status Command Data Length 0x17 0
Set Direct Channel Command Data Length 0x17 Data 6 Sel_Monitor 8 Data 1 Country Data 7 Minor_CH High_Byte Data 2 ATV_DTV Data 3 AirCable Data 4 CH_NUM High_Byte Data 5 CH_NUM Low_Byte

Data 8 Minor_CH Low_Byte

Ack Command 0xFF Val 3 AirCable
Ack/Nak 'A' Val 5 CH_NUM Low_Byte

r-CMD 0x17

Val 1 Country Val 6
Val 2 ATV_DTV Val 7 Minor_CH High_Byte Val 8 Minor_CH Low_Byte
0x0A Val 4 CH_NUM High_Byte

Sel_Monitor

Country : The value code for the country of the TV / Monitor (0 : Korea, 1: U.S.A,.) ATV_DTV : The value code for the ATV/DTV of the TV / Monitor (0 : Analog TV, 1: Digital TV) AirCable : The value code for the Air/Cable of the TV / Monitor (0 : Air, 1: Cable) CH_NUM High_Byte : The value code for the Major Channel High-Byte of the TV / DTV (Analog TV : 1 ~ 135, Digital TV : 0 ~ 999) CH_NUM Low_Byte : The value code for the Major Channel Low-Byte of the TV / DTV (Analog TV : 1 ~ 135, Digital TV : 0 ~ 999) Sel_Minor : The value code for the Minor Channel Enable/Disable of the TV / Monitor (0 : Enable, 1 : Disable)(DTV Only) Minor_CH High_Byte : The value code for the Minor Channel High-Byte of the TV / Monitor (0 ~ 999)(DTV Only) Minor_CH Low_Byte : The value code for the Minor Channel Low-Byte of the TV / Monitor (0 ~ 999)(DTV Only) Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x0D Val 1 ERR Check Sum
19) Contrast Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjusts the Contrast of the TV / Monitor. Get Contrast Status Command Data Length 0x24 0
Set Contrast Command Data Length 0xData 1 Contrast
Contrast : The Contrast Value Code of the TV / Monitor ( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x24 Val 1 Contrast Check Sum
Contrast : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x24 Val 1 ERR Check Sum
20) Brightness Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjusts the Brightness settings of the TV / Monitor Get Brightness Status Command Data Length 0x25 0
Set Brightness Command Data Length 0xData 1 Brightness
Brightness : The Brightness value code for the TV / Monitor( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x25 Val 1 Brightness Check Sum
Brightness : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x25 Val 1 ERR Check Sum
21) Sharpness Control (ATV, DTV, AV, S-Video, Component, HDMI Only)

Function The Computer adjusts the Sharpness of the TV / Monitor. Get Sharpness Status Command Data Length 0x26 0
Set Sharpness Command Data Length 0xData 1 Sharpnes s
Sharpness : The Sharpness Value Code for the TV / Monitor ( 0 ~ 100 ) Note : Sharpness can be set up within 50 Step(0, 2, 4, 6. 100) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x26 Val 1 Sharpnes s Check Sum
Sharpness : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x26 Val 1 ERR Check Sum
22) Color Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjusts the Color settings of the TV / Monitor. Get Color Status Command Data Length 0x27 0
Set Color Command Data Length 0xData 1 Color
Color : The Color Value Code for the TV / Monitor ( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x27 Val 1 Color Check Sum
Color : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x27 Val 1 ERR Check Sum
23) Tint Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjusts the Tint of the TV / Monitor when the video format is NTSC Note : It does not work in PAL signal. Get Tint Status Command Data Length 0x28 0
Set Tint Command Data Length 0xData 1 Tint
Tint : The Tint Value Code for the TV / Monitor ( 0 ~ 100 ) R G Tint Value (100 - Tint) Value
Note : Tint can be set up within 50Step (0, 2, 4, 6. 100) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x28 Val 1 Tint Check Sum
Tint : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x28 Val 1 ERR Check Sum
24) Red Gain Control (PC, BNC, MagicNet Only)
Function The Computer adjusts the Red Gain of the TV / Monitor. Get Red Gain Status Command Data Length 0x29 0
Set Red Gain Command Data Length 0xData 1 Red
Red : The Red Gain Value Code for the TV / Monitor ( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x29 Val 1 Red Check Sum
Red : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x29 Val 1 ERR Check Sum
25) Green Gain Control (PC, BNC, MagicNet Only)

30) Coarse Control (PC, BNC Only)
Function The Computer adjusts the Coarse settings of the TV / Monitor. Get Coarse Status None Set Coarse Command Data Length 0x2F 1 Data 1 Coarse
Coarse : The Frequency Increase/Decrease Code for the TV / Monitor Increase Decrease
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x2F Val 1 Coarse Check Sum
Coarse : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x2F Val 1 ERR Check Sum
31) Fine Control (PC, BNC Only)
Function The Computer adjusts the Fine settings of the TV / Monitor. Get Fine Status None Set Fine Command Data Length 0xData 1 Fine
Fine : The Phase Increase/Decrease Code for the TV / Monitor Increase Decrease
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x30 Val 1 Fine Check Sum
Fine : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x30 Val 1 ERR Check Sum
32) H-Position Control (PC, BNC Only)
Function The Computer adjusts the Horizontal Position settings of the TV / Monitor. Get H-Position Status None Set H-Position Command Data Length 0xData 1 H-Pos
H-Pos : The H-Position Increase/Decrease Code for the TV / Monitor Shift to the right Shift to the left
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x31 Val 1 H-Pos Check Sum
H-Pos : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x31 Val 1 ERR Check Sum
33) V-Position Control (PC, BNC Only)
Function The Computer adjusts the Vertical Position settings of the TV / Monitor. Get V-Position Status None Set V-Position Command Data Length 0xData 1 V-Pos
V-Pos : The V-Position Increase/Decrease Code for the TV / Monitor Shift to the right Shift to the left
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x32 Val 1 V-Pos Check Sum
V-Pos : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x32 Val 1 ERR Check Sum

34) Clear Menu Control

Function The Computer exits the Menu OSD on the TV / Monitor Get Clear Menu Status None Set Clear Menu Command Data Length 0xData 1 Clear
Clear : 0x00 (Always) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x34 Val 1 Clear Check Sum
Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x34 Val 1 ERR Check Sum

35) Remote Control

Function The Computer enables and disables the IR reception feature of the TV/Monitor remote This functions independently of the Power On/Off Get Remote Status Command Data Length 0x36 0
Set Remote Enable/Disable Command Data Length 0xData 1 RMC

RMC : Reception (status) Enable/Disable Code for the TV / Monitor Remote Remocon Enable Remocon Disable
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x36 Val 1 RMC Check Sum
RMC : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x36 Val 1 ERR Check Sum
36) RGB Contrast Control (PC, BNC, DVI, MagicNet Only)
Function The Computer adjusts the Contrast settings of the TV / Monitor when the Aspect is RGB Get Contrast Status Command Data Length 0x37 0
Contrast : The RGB Contrast Value Code for the TV / Monitor ( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x37 Val 1 Contrast Check Sum
Contrast : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x37 Val 1 ERR Check Sum
37) RGB Brightness Control (PC, BNC, DVI, MagicNet Only)
Function The Computer adjusts the Brightness settings of the TV / Monitor when the Aspect is RGB Get Brightness Status Command Data Length 0x38 0
Brightness : The RGB Brightness Value Code for the TV / Monitor ( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x38 Val 1 Brightness Check Sum
Brightness : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x38 Val 1 ERR Check Sum

38) PIP On / Off Control

Function The Computer turns the PIP function of the TV / Monitor ON/OFF. This function is not avaliable for MagicNet Mode Get PIP ON/OFF Status Command Data Length 0x3C 0
Set PIP ON/OFF Command Data Length 0x3C 1 Data 1 PIP
PIP : PIP On/Off Code for the TV / Monitor PIP ON PIP OFF
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x3C Val 1 PIP Check Sum
PIP : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x3C Val 1 ERR Check Sum
39) Auto Adjustment Control (PC, BNC Only)
Function The Computer adjusts the RGB Screen settings of the TV / Monitor. Get Auto Adjustment Status None. Set Auto Adjustment Command Data Length 0x3D 1 Data 1 Auto
Auto : 0x00 (Always) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x3D Val 1 Auto Check Sum
Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x3D Val 1 ERR Check Sum
40) Color Tone Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjust the Color Tone setting of the TV / Monitor. Get Color Tone Status Command Data Length 0x3E 0

Set Color Tone Command Data Length 0x3E 1 Data 1 Color Tone
Color Tone : The Color Tone Value Code for the TV / Monitor( 0 ~ 4 ) 0x00 0x01 0x02 0x03 0x04 0x50 Cool 2 Cool 1 Normal Warm 1 Warm 2 Off
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x3E Val 1 Color Tone Check Sum
Color Tone : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x3E Val 1 ERR Check Sum

41) Color Temp Control

Function The Computer adjust the Color Temp setting of the TV / Monitor. This function is only available that Color Tone value is 'OFF' Get Color Temp Status Command Data Length 0x3F 0
Set Color Tone Command Data Length 0x3F 1 Data 1 Color Temp
Color Temp : The Color Temp Value Code for the TV / Monitor( 0 ~ 10 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x3F Val 1 Color Temp Check Sum
Color Temp : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x3F Val 1 ERR Check Sum

42) PIP Source Control

Function The Computer adjusts the PIP Source of the TV / Monitor. Available only when the PIP function is On. Not available in MagicNet Get PIP Source Status Command Data Length 0x40 0
Set PIP Source Command Data Length 0xData 1 P.Source
P.Source : The Input source Code for the TV / Monitor Changing the PIP source may not be available depending on the main source. See table below. <460Txn Model> PC PC DVI TV/DTV AV S-Video Component HDMI X X X X X DVI X X X TV/DTV X X X X X X X X X X X X X X X X X X X X X X AV S-Video Component HDMI X X X X X X X
<400/460/570/700/820Dxn Model> PC PC BNC DVI DVI_VIDEO AV S-Video Component HDMI Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x40 Val 1 P.Source Check Sum X X X X X X X BNC X X X X DVI X X X X DVI_VIDEO X X X X X X X X X X X X X X X X X X X X X X X AV S-Video Component HDMI
P.Source : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x40 Val 1 ERR Check Sum
43) Main-PIP Swap Control
Function The Computer swap the main screen with the PIP screen. Not available in MagicNet. Get Main-PIP Swap Status None. Set Main-PIP Swap Command Data Length 0xData 1 Swap
Swap : 0x00 (Always) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x41 Val 1 Swap Check Sum

PMode : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x71 Val 1 ERR Check Sum

55) S.Mode Control

Function The Computer changes the Sound Mode of TV/Monitor. Get SMode Status Command Data Length 0x72 0
Set SMode Command Data Length 0xData 1 SMode
SMode : The Sound Mode code for the TV / Monitor Data 0x00 0x01 0x02 0x03 0x04 Mode Standard Music Movie Speech Custom
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x72 Val 1 SMode Check Sum
SMode : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x72 Val 1 ERR Check Sum
56) NR Mode Set (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer changes the Digital NR Mode. Get NR Mode Status Command Data Length 0x73 0
Set NR Mode Command Data Length 0xData 1 NR Mode
NR Mode : The NR Mode On/Off code for the TV / Monitor NR Mode On NR Mode Off
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x73 Val 1 NR Mode Check Sum
NR Mode : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x73 Val 1 ERR Check Sum
57) PC Color Tone Control (PC, BNC , DVI, MagicNet only)
Function The Computer changes the Color tone of TV/Monitor. Get Color Tone Status Command Data Length 0x75 0
Set Color Tone Command Data Length 0xData 1 Color Tone
Color Tone : The Color Tone Valur Code for the TV / Monitor(1 ~ 3) Source PC DVI BNC Data 0x00 0x01 0x02 0x03 Mode Custom Cool Normal Warm
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x75 Val 1 Color Tone Chec k Sum
Color Tone : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x75 Val 1 ERR Check Sum

58) Auto AutoAdjustment

Function The Computer adjusts the Auto Adjustment of TV/Monitor Enable/Disable. Auto Adjustment is only available when the power is turned On. Get A.Adjustment Status Command Data Length 0x76 0
Set A.Adjustment Command Data Length 0xData 1 A.Adjustment
A.Adjustment : The Auto Adjustment Value Code for the TV / Monitor Enable Disable
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x76 Val 1 A.Adjustment Check Sum
A.Adjustment : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x76 Val 1 ERR Check Sum

59) All Keys Lock

Function The Computer switches both the Remote Control and the Panel Key Lock function ON/PFF. Available even if the power is turned OFF. Get All Key Status Command Data Length 0x77 0

Set SB Sharpness Command Data Length 0x7F 1 Data 1 SBSharpness
SBSharpness : Sharpness value which will be set up into Monitor.Code (0~ 100)
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x7F Val 1 SBSharpness Check Sum
SBSharpness : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x7F Val 1 ERR Check Sum

65) Panel On Time

Function The Computer show the Panel On Time status for Monitor. Get Panel On Time Status Command Data Length 0x83 0
Ack Command Data Length 0xFF 4 Ack/Nak 'A' r-CMD 0x83 Val 1 PTime_H Val 2 PTime_L Check Sum
PTime_H : Panel On Time High PTime_L : Panel On Time Low Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x83 Val 1 ERR Check Sum

66) Video Wall On

Function The Computer enables ON/OFF of Video Wall for Monitor. Get Video Wall Status Command Data Length 0x84 0
Set Video Wall Command Data Length 0xData 1 V.Wall_On
V.Wall_On : Video Wall On Code which will be set up into Monitor Video Wall On Video Wall Off
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x84 Val 1 V.Wall_On Check Sum
V.Wall_On : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x84 Val 1 ERR Check Sum

67) Temperature Control

Function The Computer set the Max temperature of TV/Monitor. Get Temperature Status Command Data Length 0x85 0
Set Temperature Command Data Length 0xData 1 Temperature
Temperature : Temperature Code which will be set up into TV/Monitor Data 46 ~ 125( )
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x85 Val 1 Temperature Check Sum
Temperature : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x85 Val 1 ERR Check Sum

68) Brightness Sensor

Function The Computer enables ON/OFF of Brightness Sensor for TV/Monitor. Get Brightness Sensor ON/OFF Status Command Data Length 0x86 0
Set Brightness Sensor ON/OFF Command Data Length 0xData 1 BR_Sensor
BR_Sensor : Brightness Sensor Code which will be set up into Monitor Brightness Sensor On Brightness Sensor Off
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x86 Val 1 BR_Sensor Check Sum
BR_Sensor : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x86 Val 1 ERR Check Sum

73) MagicNet PIP (MagicNet Only)
Function The Computer turns the PIP function ON/OFF at MagicNet. Get MagicNet PIP status None Set MagicNet PIP On - (Data in Red font is for model 460Txn) Command Data Length 0xE0 Data 6 0x0C (0x13) Data 7

PIP ON

Data 1 H Position High-Byte Data 9 P.Source Data 17
Data 2 H Position Low-Byte Data 10 TV Channel Data 18 Minor_CH Low_Byte
Data 3 V Position High-Byte
Data 4 V Position Low-Byte
Data 5 H Size High-Byte Data 13 AirCable

0x01 Data 8

Data 11 Data 11 Data 12 S.Select Country ATV/DTV
H Size V Size Low-Byte High-Byte Data 14 Data 15

V Size Low-Byte Data 16

CH_NUM CH_NUM Minor_CH High_Byte Low_Byte Sel_Minor High_Byte
H Position High-Byte : The Position value code for PIP H-Start High-Byte. H Position Low-Byte : The Position value code for PIP H-Start Low-Byte. V Position High-Byte : The Position value code for PIP V-Start High-Byte. V Position Low-Byte : The Position value code for PIP V-Start Low-Byte. H Size High-Byte : The Size value code for PIP H-width High-Byte. H Size Low-Byte : The Size value code for PIP H-width Low-Byte. V Size High-Byte : The Size value code for PIP V-width High-Byte. V Size Low-Byte : The Size value code for PIP V-width Low-Byte. Note : The PIP Start Position and Size do not over 1366 X 768 or 1920 X 1080 P.Source : The Input source Code 0x14 0x1E 0x18 0x0C 0x04 0x08 0x21 0x30 0x40 PC BNC DVI AV S-Video Component HDMI TV DTV
TV Channel : Channel Number (0~99) Note : 460Txn Only S.Select : The Sound select Code MagicNet Sound PIP Sound
Country : The value code for the country of the TV / Monitor (0 : Korea, 1: U.S.A,.) ATV_DTV : The value code for the ATV/DTV of the TV / Monitor (0 : Analog TV, 1: Digital TV) AirCable : The value code for the Air/Cable of the TV / Monitor (0 : Air, 1: Cable) CH_NUM High_Byte : The value code for the Major Channel High-Byte of the TV / DTV (Analog TV : 1 ~ 135, Digital TV : 0 ~ 999) CH_NUM Low_Byte : The value code for the Major Channel Low-Byte of the TV / DTV (Analog TV : 1 ~ 135, Digital TV : 0 ~ 999) Sel_Minor : The value code for the Minor Channel Enable/Disable of the TV / Monitor (0 : Enable, 1 : Disable)(DTV Only) Minor_CH High_Byte : The value code for the Minor Channel High-Byte of the TV / Monitor (0 ~ 999)(DTV Only) Minor_CH Low_Byte : The value code for the Minor Channel Low-Byte of the TV / Monitor (0 ~ 999)(DTV Only) Ack(Data in Red font is for model 460Txn) Command Data Length 0xFF Val 5 H Size Low-Byte Val 13 ATV_DTV 0x15 Val 6 H Size High-Byte Val 14 AirCable Ack/Nak 'A' Val 7 r-CMD 0xE0 Val 8

Val 3 V Position Low-Byte
Val 4 V Position High-Byte
H Position H Position Low-Byte High-Byte Val 10 TV Channel
Val 11 S.Select Val 19 Minor_CH Low_Byte

Val 12 Country

V Size V Size Low-Byte High-Byte P.Source Val 15 CH_NUM High_Byte Val 16 CH_NUM Low_Byte Val 17
Val 18 Minor_CH High_Byte

Sel_Minor

H Position Low-Byte : Same as above H Position High-Byte : Same as above V Position Low-Byte : Same as above V Position High-Byte : Same as above H Size Low-Byte : Same as above H Size High-Byte : Same as above V Size Low-Byte : Same as above V Size High-Byte : Same as above P.Source : Same as above TV Channel : Same as above S.Select : Same as above Country : Same as above ATV_DTV : Same as above CH_NUM High_Byte : Same as above CH_NUM Low_Byte : Same as above Sel_Minor : Same as above Minor_CH High_Byte : Same as above Minor_CH Low_Byte : Same as above
Set MagicNet PIP Off (Data in Red font is for model 460Txn) Command Data Length 0xE0 0x0C 0x13

PIP Off

Ack (Data in Red font is for model 460Txn) Command Data Length 0xFF 0x0E 0x15 Ack/Nak 'A' r-CMD 0xE0
Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0xE0 Val 1 ERR Check Sum

74) Panel ON/OFF

Function The Computer control ON/OFF status of Panel for TV/Monitor. Get Panel ON/OFF Status Command Data Length 0xF9 0
Set Panel ON/OFF Command Data Length 0xFData 1 Panel
Panel : Panel On/Off Code which will be set up into Monitor Panel On Panel Off
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0xF9 Val 1 Panel Check Sum
Panel : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0xF9 Val 1 ERR Check Sum

SEC-VD-DSW Multiple Display Control - 0008 Ver. 2.1 2008-06-26
Multiple Display Control Protocol for SyncMaster 42TS/42PS P50Hn P50F(n) P63F(n) 320MX(n) 400CX(n) 400MX(n) 460CX(n)
Copyright Samsung Electronics Co., Ltd
SEC-VD-DSW External Control - 0008
SEC-VD-DSW Multiple Display Control - 0008 Ver. 1.0 2008-06-26

Copyright notice

This document is Copyright Samsung Electronics, Co. - all rights reserved. This document is a technical asset of Samsung Electronics, Co. and using or copying this material without the authorization from the technical data management group is strictly prohibited.

Contact Information

Display S/W Group, VD Business Division Samsung Electronics Co., Ltd Address : 416, Maetan-3Dong, Paldal-Gu, Suwon City, Kyungki-Do, Korea 442-742 Telephone : 82-31-277-2764 E-mail : hyo1029@samsung.com
Prepared by : Display S/W, Video Display Division. Status : Prepared Subject : Technical Writer, Programmer, Developer Outline : Protocol type document of Multiple Display Control 1.0 History : Version 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Date 2005. 01. 05. 2005. 01. 07 2005. 01. 18 2005. 01. 26 2005. 03. 11 2005. 07. 04 2005. 11. 11 2006. 02. 01 2006. 10. 02 Content Protocol for Multiple Display Control Add Safety Lock Add Video Wall modify Maintenance Control modify Baudrate, PIP Control Add Commands Add Command ( Screen Scroll On) Add Commands Add Commands Prepared by S. Jang S. Jang J. Lee S. Jang J. Lee S. Jang S. Jang H. Park H. Park 1 Compared by
Display S/W, VD Business Team, Samsung Electronics
SEC-VD-DSW External Control - 0008 1.9 Version 2.0 2.1 2006. 12. 18 Date 2007. 04. 17. 2008. 06. 26. Add Commands ( New Video Wall ) Content Add Commands Add Commands H. Park Prepared by H. Park J. Choi Compared by

1. INTERFACE

1.1. Connecting Method

1) Connecting method

- As of Figure 1-1, connect RS232-In(9Pin) to Personal Computer, connect the next TV of Display to be connected from RS232-Out (9Pin). - In doing so, each TV or Monitor ID can be given from 0 to 99. - ID cannot be given duplicated. - When granting ID, it does not need to be given out in the connecting order.
Figure1-1 PC,TV or Monitor connecting method

UART LCD 1

UART LCD 2

UART LCD 3

UART LCD 4

Personal Computer

1.2. Connection Spec.

1) Connection Spec.

- Interactive communications using RS232. - Of RS232 standards, three signals TxD(No.2), RxD(No.3) and GND(No.5) are used Refer to Figure 1 - Limit the distance between devices to less than 4m. - Currently, out of 9 PIN RS232 terminal, PINS in use are numbers 2, 3 and 5. - ID should show hexadecimal value of assigned ID, but ID 0 should be 0xFF. - Every communication will be made in hexadecimals and Checksum is the sum of all remainings. If it exceeds two digits, for example, it is 11+FF+01+01=112, discard the number in the first digit like below. example) Power On & ID=0 Header 0xAA Command 0x11 Header 0xAA ID

Data Length

Data 1 Power

1 0xFF

Check Sum Data 12

Command 0x11

- If you want to control every mechanism connected with Serial Cable regardless of its ID, set ID part to "0xFE" and send commands. At the time, each SET will follow commands but it will not respond with ACK. Table 2-1 RS232 Network spec Bits Rate Data Bits Parity Stop Bits Flow Control 9600 bps 8 bits None 1 bit None
SEC-VD-DSW External Control - 0008 Figure 2-1 RS-232 pin out DB-9 pin used for Asynchronous Data

2. Commanding words

No 29 30
Command Type Status Control Time Control On Time Control Off Time Control Video Control Audio Control RGB Control PIP Status Control Maintenance Control Serial Number Control Display Status Control Software Version Control Model Number Control Power Control Volume Control Mute Control Input Source Control Image Size Control Direct Channel Control Screen Mode Control Screen Size Control Red Offset Control Green Offset Control Blue Offset Control Contrast Control Brightness Control Sharpness Control Color Control Tint Control Red Gain Control
Command 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x0B 0x0D 0x0E 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x18 0x19 0x1A 0x1B 0x1C 0x24 0x25 0x26 0x27 0x28 0x29

Value Range 0 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 100
65 Green Gain Control Blue Gain Control Treble Control Bass Control Coarse Control Fine Control H-Position Control V-Position Control Clear Menu Control Remote Control RGB Contrast Control RGB Brightness Control PIP On/Off Control Auto Adjustment Control Color Tone Control Color Temperature Control PIP Source Control Main-PIP Swap Control PIP Size Control PIP Locate Control Sound Select Control Pixel Shift Control Video Wall Control Auto Lamp Control Manual Lamp Control Safety Screen Run Control Safety Screen Control Video Wall Mode Control Safety Lock Panel Lock OSD On/OFF P. Mode Control S. Mode Control NR Mode Set PC Color Tone Control 0x2A 0x2B 0x2C 0x2D 0x2F 0x30 0x31 0x32 0x34 0x36 0x37 0x38 0x3C 0x3D 0x3E 0x3F 0x40 0x41 0x42 0x43 0x47 0x4C 0x4F 0x57 0x58 0x59 0x5B 0x5C 0x5D 0x5F 0x70 0x71 0x72 0x73 0x~ ~ ~ ~ ~ ~ ~ ~ 0 ~ ~ ~ ~ 0 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 3
80 Auto AutoAdjustment All Keys Lock SRS TSXT Control Film Mode Signal Balance SB Gain SB Sharpness Panel On Time Video Wall On Temperature Control Brightness Sensor Dynamic Contrast Safety Screen On Video Wall User Control Model Name 0x76 0x77 0x78 0x79 0x7A 0x7E 0x7F 0x83 0x84 0x85 0x86 0x88 0x88 0x89 0x8A 0 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 5 -
"-" indicates multiple setting items-refer to "2.1. Command Detailed Explanation" for more details.
2.1. Command Detailed Explanation

* Status Control

Function Personal Computer shows current setting condition of TV / Monitor.
Get Status Header 0xAA Ack Header 0xAA Val 3 Mute Command 0xFF Val 4 Input ID Val 5 Aspect

Command 0x00

Check Sum

Ack/Nak 'A' Val 7

r-CMD 0x00 Check Sum

Val 1 Power

Val 2 Volume

9 Val 6

N Time NF F Time NF
Power : Power code to be set on TV / Monitor Volume : Volume value code ( 0 ~ 100 ) to be set on TV / Monitor Mute : Mute code to be set on TV / Monitor Input : Input Source code to be set on TV/Monitor Aspect : Image Size code to be set on TV/Monitor N Time NF : OnTime ON/OFF value of time to set TV/Monitor F Time NF : OffTime ON/OFF value of time to set TV/Monitor
Nak Header 0xAA Command 0xFF ID

Ack/Nak 'N'

r-CMD 0x00

Val 1 ERR

F Time NF : Off Time ON/OFF value to be set on TV/Monitor

Command 0xFF Val 4

ID Val 5

r-CMD 0x03

F AP Time F H Time
F AP Time, F H Time, F M Time, F Time NF : Same as above F H Time, F M Time if Off Time was not set on, 0xFF
Display S/W, VD Business Team, Samsung Electronics 12
* Video Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function Personal Computer shows the screen condition of TV / Monitor.
Get Video Status Header 0xAA Ack Header 0xAA Val 3 Sharpness Command 0xFF Val 4 Color ID Val 5 Tint

Command 0x04

r-CMD 0x04 Val 8 0

Val 1 Contrast Check Sum

Val 2 Brightness

0x0A Val 6

ColorTone ColorTemp
Contrast, Brightness, Sharpness, Color, Tint, ColorTone, ColorTemp : Same as above

r-CMD 0x04

Display S/W, VD Business Team, Samsung Electronics 13

* Audio Control

Function Personal Computer shows the sounds condition of TV / Monitor.
Get Audio Status Header 0xAA Command 0x05 ID
Ack Header 0xAA Val 3 Balance Command 0xFF Check Sum ID

r-CMD 0x05

Val 1 Treble

Val 2 Bass

Treble, Bass, Balance : Same as above
Display S/W, VD Business Team, Samsung Electronics 14
* RGB Control (PC, BNC, DVI Only)
Function Personal Computer shows screen condition of TV / Monitor.
Get Video Status Header 0xAA Command 0x06 ID
Ack Header 0xAA Val 3 Command 0xFF Val 4 ID Val 5 0

r-CMD 0x06 Val 8

Red Gain Green Gain Blue Gain
Contrast, Brightness, ColorTone, ColorTemp, Red, Green, Blue : Same as above

r-CMD 0x06

Display S/W, VD Business Team, Samsung Electronics 15

* PIP Status Control

Function Personal Computer shows PIP setting state of TV / Monitor.
Get PIP Status Header 0xAA Ack Header 0xAA Val Command 0xFF Val ID Check Sum

Command 0x07

r-CMD 0x07

Val 1 P.Size

Val 2 P.Source
P.Size : PIP Size value code set at TV / Monitor 0x00 0x06 0x08 0x04 0x05 0x09 PIP Off Large Small Double 1 Double 2 Double 3
P.Source : PIP Source value code set at TV / Monitor
Display S/W, VD Business Team, Samsung Electronics 16

* Maintenance Control

Function Personal Computer shows maintenance state of TV / Monitor.
Get Maintenance Status Header 0xAA Command 0x08 ID
Ack Header 0xAA Val 3 P.Source Val 11 LMinValue Val17 V.WallFormat Command 0xFF Val 4 LMax_H ID Val 5 LMax_M
Ack/Nak 'A' Val 7 LMaxValue Val 14

r-CMD 0x08 Val 8 LMin_H

Val 1 Power Val 9 LMin_M
Val 2 P.Size Val 10 LMin_AP Val 16 V.Wall
0x15 Val 6 LMax_AP Val 13 ScreenInterval Val19 V.WallSet
Val 12 LampValue Val 18 V.WallDivid

Val 15 ScreenType

ScreenTime
Power : Power code set on TV / Monitor P.Size : PIP Size value code set on TV / Monitor P.Source : PIP Source value code set on TV / Monitor LMax_H : Auto Lamp Max Time Hour (1 ~ 12) set on TV / Monitor LMax_M : Auto Lamp Max Time Minute (0 ~ 59) set on TV / Monitor LMax_AP : Auto Lamp Max Time AM/PM set on TV / Monitor LMaxValue : Auto Lamp Max value (0 ~ 100) set on TV / Monitor LMin_H : Auto Lamp Min Time Hour (1 ~ 12) set on TV / Monitor LMin_M : Auto Lamp Min Time Minute (0 ~ 59) set on TV / Monitor LMin_AP : Auto Lamp Min Time AM/PM set on TV / Monitor LMinValue : Auto Lamp Min value (0 ~ 100, 0xFF) set on TV / Monitor LampValue : Manual Lamp Control value (0 ~ 100, 0xFF) set on TV / Monitor ScreenInterval : Safety Screen Interval (Per Hour, 0(0ff)~10) set on TV / Monitor ScreenTime : Safety Screen Time (Per Second, 0(off) ~5) set on TV / Monitor ScreenType : Safety Screen Type (3 ~ 6) set on TV / Monitor V.Wall : Video Wall Mode code set on TV / Monitor V.WallFormat : Video Wall Format code set on TV / Monitor V.WallDivid : Video Wall Divider code set on TV / Monitor V.WallSet : Video Wall Set Number code set on TV / Monitor Caution : If LMinValue is Returned to 0xFF then Auto Lamp Control is OFF. If LampValue is Returned to 0xFF then Manual Lamp Control is OFF.

r-CMD 0x08

ERR : Error code that shows what occurred error is Display S/W, VD Business Team, Samsung Electronics 17

* Serial Number Control

Function Personal Computer controls serial number of TV / Monitor.
Get SerialNum Status Header 0xAA Command 0x0B
Ack SerialNum Header 0xAA Val 3 Data3 Val 11 Data11 Command 0xFF Val 4 Data4 Ack/Nak 'A' Val 7 Data7 Val 14 Data14 r-CMD 0x0B Val 8 Data8 Val 1 Data1 Val 9 Data9 Val 2 Data2 Val 10 Data10

ID Val 5 Data5

0x10 Val 6 Data6 Val 13 Data13

Val 12 Data12

Data1 ~ Data14 : Serial Number set on TV / Monitor.

r-CMD 0x0B

Display S/W, VD Business Team, Samsung Electronics 18

* Display Status Control

Function Personal Computer shows display condition of TV / Monitor.
Get Maintenance Status Header 0xAA Ack Header 0xAA Val 3 Bright_Sensor Command 0xFF Val 4 No_Sync ID

Command 0x0D

Ack/Nak 'A' Val 6 FAN

r-CMD 0x0D

0x08 Val 5 Cur_Temp

Lamp Temperature

Lamp : Lamp Error code (0 : Normal, 1 : Error) to be set on TV / Monitor Temperature : Temperature Error code (0: Normal, 1: Error) to be set on TV / Monitor Bright_Sensor : Brighte Sensor Error code (0: Normal, 1: Error) to be set on TV/Monitor No_Sync: Sync Error code(0: Normal, 1: Error, No Sync) to be set on TV / Monitor Cur_Temp : Current temperature of TV / Monitor FAN : Fan Error code (0 : Normal, 1 : Error) to be set on TV / Monitor

Function Personal Computer changes the color of TV / Monitor.
Get Color Status Header 0xAA Set Color Header 0xAA Command 0x27 ID

Command 0x27

Data 1 Color
Color : Color value code to be set on TV/Monitor( 0 ~ 100 )

r-CMD 0x27

Val 1 Color

Color : Same as above

Display S/W, VD Business Team, Samsung Electronics 37
* Tint Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function Personal Computer changes tint of TV / Monitor when visual display is NTSC. Does not operate with PAL signals.
Get Tint Status Header 0xAA Set Tint Header 0xAA Command 0x28 ID

Command 0x28

Data 1 Tint
Tint : Tint value code to be set on TV/Monitor (0 ~ 100 ) R G Tint Value (100 - Tint) Value
Caution : Tint could only be set in 50 Steps (0, 2, 4, 6. 100)

r-CMD 0x28

Val 1 Tint

Tint : Same as above

Display S/W, VD Business Team, Samsung Electronics 38
* Red Gain Control (PC, BNC Only)
Function Personal Computer changes Red Gain of TV / Monitor.
Get Red Gain Status Header 0xAA Set Red Gain Header 0xAA Command 0x29 ID

Command 0x29

Data 1 Red
Red : Red Gain value code to be set on TV/Monitor ( 0 ~ 100 )

r-CMD 0x29

Val 1 Red

Red : Same as above

Display S/W, VD Business Team, Samsung Electronics 39
* Green Gain Control (PC, BNC Only)
Function Personal Computer changes Green Gain of TV / Monitor.
Get Green Gain Status Header 0xAA Command 0x2A ID
Set Green Gain Header 0xAA Command 0x2A ID

Data 1 Green

Green : Green Gain value code to be set on TV/Monitor ( 0 ~ 100 )

r-CMD 0x2A

Val 1 Green

Green : Same as above

Display S/W, VD Business Team, Samsung Electronics 40
* Blue Gain Control (PC, BNC Only)
Function Personal Computer changes Blue Gain of TV / Monitor.
Get Blue Gain Status Header 0xAA Set Blue Gain Header 0xAA Command 0x2B ID

Command 0x2B

Data 1 Blue
Blue : Blue Gain value code to be set on TV/Monitor ( 0 ~ 100 )

r-CMD 0x2B

Val 1 Blue

Blue : Same as above

Display S/W, VD Business Team, Samsung Electronics 41

* Treble Control

Function Personal Computer changes Treble of TV / Monitor.
Get Treble Status Header 0xAA Set Treble Header 0xAA Command 0x2C ID

Command 0x2C

Data 1 Treble
Treble : Treble value code to be set on TV/Monitor ( 0 ~ 100 ) Caution : Treble could only be set in 40 Steps (0, 2, 5, 7. 100)

r-CMD 0x2C

Treble : Same as above
Display S/W, VD Business Team, Samsung Electronics 42

* Bass Control

Function Personal Computer changes Bass of TV / Monitor.
Get Bass Status Header 0xAA Set Bass Header 0xAA Command 0x2D ID

Command 0x2D

Data 1 Bass
Bass : Bass value code ( 0 ~ 100 ) Caution : Bass could only be set in 40 Steps. (0, 2, 5, 7. 100)

r-CMD 0x2D

Val 1 Bass

Bass : Same as above

Display S/W, VD Business Team, Samsung Electronics 43

* Balance Control

Function Personal Computer changes Balance of TV / Monitor.
Get Balance Status Header 0xAA Set Balance Header 0xAA Command 0x2E ID

Command 0x2E

Data 1 Balance
Balance : Balance value code to be set on TV/Monitor ( 0 ~ 100 ) L R (100 - Balance) Value Balance Value
Caution : Balance could only be set in 22 Steps. (0, 4, 9, 13. 100)

r-CMD 0x2E

Val 1 Balance

Balance : Same as above

Display S/W, VD Business Team, Samsung Electronics 44
* Coarse Control (PC, BNC Only)
Function Personal Computer adjusts Coarse of TV / Monitor.

Get Coarse Status None

Set Coarse Header 0xAA Command 0x2F ID

Data 1 Coarse

Coarse : Coarse Increase/Decrease code to be set on TV/Monitor Ack Header 0xAA Command 0xFF ID

Increase Decrease

r-CMD 0x2F

Val 1 Coarse

Coarse : Same as above
Display S/W, VD Business Team, Samsung Electronics 45
* Fine Control (PC, BNC Only)
Function Personal Computer adjusts Fine of TV / Monitor.

Get Fine Status None

Set Fine Header 0xAA Command 0x30 ID

Data 1 Fine

Fine : Phase Increase/Decrease code Ack Header 0xAA Command 0xFF ID

r-CMD 0x30

Val 1 Fine

Fine : Same as above

Display S/W, VD Business Team, Samsung Electronics 46
* H-Position Control (PC, BNC Only)
Function Personal Computer adjusts Horizontal Position of TV / Monitor.
Get H-Position Status None
Set H-Position Header 0xAA Command 0x31 ID

Data 1 H-Pos

H-Pos : H-Position Increase/Decrease code to be set on TV/Monitor Ack Header 0xAA Command 0xFF ID
Move to Right Move to Left

Function Personal Computer turns PIP of TV / Monitor ON/OFF. Does not operate in MagicNet.
Get PIP ON/OFF Status Header 0xAA Command 0x3C ID
Set PIP ON/OFF Header 0xAA Command 0x3C ID

Data 1 PIP

PIP : PIP On/Off code to be set on TV/Monitor Ack Header 0xAA Command 0xFF ID

PIP ON PIP OFF

r-CMD 0x3C

Val 1 PIP

PIP : Same as above
Display S/W, VD Business Team, Samsung Electronics 53
* Auto Adjustment Control (PC, BNC Only)
Function Personal Computer controls PC system screen automatically.
Get Auto Adjustment Status None
Set Auto Adjustment Header 0xAA Command 0x3D ID

Data 1 Auto

Auto : 0x00 (Always)

r-CMD 0x3D

Val 1 Auto
Display S/W, VD Business Team, Samsung Electronics 54
* Color Tone Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function Personal Computer changes Color Tone of TV / Monitor.
Get Color Tone Status Header 0xAA Command 0x3E ID
Set Color Tone Header 0xAA Command 0x3E ID

Data 1 Color Tone

Color Tone : Color Tone value code to be set on TV/Monitor ( 0 ~ 4 ) 0x00 0x01 0x02 0x03 0x04 0x50 Ack Header 0xAA Command 0xFF ID
Cool 2 Cool 1 Normal Warm 1 Warm 2 Off

r-CMD 0x3E

Val 1 Color Tone
Display S/W, VD Business Team, Samsung Electronics 55
* Color Temperature Control
Function Personal Computer changes Color Temperature value of TV / Monitor. Only operates when Color Tone is set to Off.
Get C_Temp Status Header 0xAA Set Brightness Header 0xAA Command 0x3F ID

Command 0x3F

Data 1 C_Temp
C_Temp : Color Temperature value code to be set on TV/Monitor ( 0 ~ 10 )

r-CMD 0x3F

Val 1 C_Temp

C_Temp : Same as above

Display S/W, VD Business Team, Samsung Electronics 56

* PIP Source Control

Function Personal Computer changes PIP source of TV / Monitor. Does not operate in MaginNet. Only works with TV/Monitor where PIP is on.
Get PIP Source Status Header 0xAA Command 0x40 ID
Set PIP Source Header 0xAA Command 0x40 ID

Data 1 P.Source

P.Source : Input Source code to be set on TV/Monitor Caution : PIP Source convert may not operate depending on Main Source. Refer to table below. * Models with no DTV PC PC BNC DVI AV S-Video Component HDMI X X X BNC X X X DVI X X X AV X X X X S-Video X X X X Comp. X X X X HDMI X X X X X

* Models with DTV PC PC DVI TV/DTV AV S-Video Component HDMI

DVI X X X X

TV/DTV X X X X X X X

AV X X X X X

S-Video X X X X X

Comp. X X X X X

HDMI X X X X X X X

X X X X

r-CMD 0x40

Val 1 P.Source

P.Source : Same as above
ERR : Error code that shows what occurred error is Display S/W, VD Business Team, Samsung Electronics 57

* Main-PIP Swap Control

Function Personal Computer swaps Main screen and PIP screen. Does not operate in MagicNet.
Get Main-PIP Swap Status None
Set Main-PIP Swap Header 0xAA Command 0x41 ID

Data 1 Swap

Swap : 0x00 (Always)

r-CMD 0x41

Val 1 Swap
Display S/W, VD Business Team, Samsung Electronics 58

* PIP Size Control

Function Personal Computer changes PIP Size of TV / Monitor. Does not operate in MagicNet.
Get PIP Size Status Header 0xAA Set PIP Size Header 0xAA Command 0x42 ID

Command 0x42

Data 1 P.Size
P.Size : PIP Size value code to be set on TV/Monitor 0x00 0x06 0x08 0x04 0x05 0x09 Ack Header 0xAA Command 0xFF ID
PIP Off Large Small Double 1 Double 2 Double 3

r-CMD 0x42

P.Size : Same as above
Display S/W, VD Business Team, Samsung Electronics 59

* PIP Locate Control

Function Personal Computer controls PIP position of TV / Monitor. Does not operate in MagicNet.
Get PIP Locate Status None
Set PIP Locate Header 0xAA Command 0x43 ID

Data 1 P.Locate

P.Locate : PIP Locate Increase/Decrease code to be set on TV/Monitor 4 Ack Header 0xAA Command 0xFF ID
PIP Off(Get Only) Upper Left Upper Right Lower Right Lower Left

r-CMD 0x43

Val 1 P.Locate

P.Locate : Same as above

Display S/W, VD Business Team, Samsung Electronics 60

* Sound Select Control

Function Personal Computer converts Sound when PIP of TV / Monitor is on.

Get Video Wall Mode Header 0xAA Command 0x5C ID
Set Video Wall Mode Header 0xAA Command 0x5C ID

Data 1 WallMode

WallMode : Video Wall Mode code to be set on TV/Monitor Ack Header 0xAA Command 0xFF ID

Full Natural

r-CMD 0x5C

Val 1 WallMode

WallMode : same as above
Display S/W, VD Business Team, Samsung Electronics 68

* Safety Lock

Personal Computer turns Safety Lock function of TV/Monitor On/Off. On/Off .
Get Safety Lock Status Header 0xAA Command 0x5D ID
Set Safety Lock Enable/Disable Header 0xAA Command 0x5D ID

Data 1 Lock

Lock : Lock code to be set on TV/Monitor Ack Header 0xAA Command 0xFF ID

On Off

r-CMD 0x5D

Val 1 Lock

Lock : Same as above
Display S/W, VD Business Team, Samsung Electronics 69

* Panel Lock

Function Personal Computer turns Panel function Key Lock of TV/Monitor On/OFF. Can operate regardless of whether power is on/off.
Get Panel Lock Status Header 0xAA Command 0x5F ID
Set Panel Lock Header 0xAA Command 0x5F ID

Data 1 Panel Lock

Panel Lock : Panel Key Lock On/Off code to be set on TV/Monitor Ack Header 0xAA Command 0xFF ID

Lock Unlock

r-CMD 0x5F

Val 1 Panel Lock

Panel Lock : Same as above
Display S/W, VD Business Team, Samsung Electronics 70

* OSD On/Off

Function Personal Computer turns OSD of TV / Monitor On/Off. When OSD is on, OSD will be shown on screen When OSD is off, OSD will not shown on screen at all
Get OSD Enable Status Header 0xAA Command 0x70 ID
Set OSD Enable/Disable Header 0xAA Command 0x70 ID

Data 1 OSD

OSD : OSD On/Off code to be set on TV/Monitor Ack Header 0xAA Command 0xFF ID

OSD On OSD Off

r-CMD 0x70

Val 1 OSD

OSD : Same as above
Display S/W, VD Business Team, Samsung Electronics 71

* P.Mode Control

Function Personal Computer changes Picture Mode of TV / Monitor.
Get PMode Status Header 0xAA Set PMode Header 0xAA Command 0x71 ID

Command 0x71

Data 1 PMode
PMode : Picture Mode code to be set on TV/Monitor Source AV S-Video Component HDCP ( TV ) PC BNC DVI ( MagicNet ) Data 0x00 0x01 0x02 0x03 0x50 0x10 0x11 0x12 0x13 0x50 Mode Dynamic Standard Movie Custom Off Entertain Internet Text Custom Off

r-CMD 0x77

Val 1 All Key

All Key : Same as above

Display S/W, VD Business Team, Samsung Electronics 77

* SRS TS XT Control

Function Personal Computer turns SRS TS XT of TV / Monitor on/off. Can only operate with TV/Monitor that has SRS TS XT function.
Get SRS TS XT Status Header 0xAA Set SRS TSXT Header 0xAA Command 0x78 ID

Command 0x78

Data 1 SRS
SRS : SRS TS XT code to be set on TV/Monitor Ack Header 0xAA Command 0xFF ID

SRS ON SRS OFF

r-CMD 0x78

Val 1 SRS

SRS : Same as above
Display S/W, VD Business Team, Samsung Electronics 78

* Film Mode Control

Function Personal Computer turns Film Mode of TV / Monitor on/off.
Get Film Mode Status Header 0xAA Set Film Mode Header 0xAA Command 0x79 ID

Command 0x79

Data 1 FMode
FMode : Film Mode code to be set on TV/Monitor Ack Header 0xAA Command 0xFF ID
Film Mode ON Film Mode OFF

r-CMD 0x79

Val 1 FMode

FMode : Same as above

Display S/W, VD Business Team, Samsung Electronics 79
* Signal Balance ( PC, BNC Only)
Function Personal Computer turns Signal Balance of TV / Monitor ON/OFF.
Get Signal Balance Status Header 0xAA Command 0x7A ID
Set Signal Balance Header 0xAA Command 0x7A ID

Data 1 SBalance

SBalance : Signal Balance code to be set on TV/Monitor Ack Header 0xAA Command 0xFF ID
Signal Balance ON Signal Balance OFF

r-CMD 0x7A

Val 1 SBalance

SBalance : Same as above

Display S/W, VD Business Team, Samsung Electronics 80
* SB Gain ( PC, BNC Only)
Function Personal Computer changes Gain value of Monitor Signal Balance.
Get SBGain Status Header 0xAA Set SBGain Header 0xAA Command 0x7E ID

Command 0x7E

Data 1 SBGain
SBGain : Phase B value code of Signal Balance to be set on Monitor ( 0 ~ 100 )

r-CMD 0x7E

Val 1 SBGain

SBGain : Same as above

Display S/W, VD Business Team, Samsung Electronics 81
* SB Sharpness ( PC, BNC Only)
Function Personal Computer changes Sharpness value of Monitor Signal Balance.
Get SBSharpness Status Header 0xAA Command 0x7F ID
Set SBSharpness Header 0xAA Command 0x7F ID

Data 1 SBSharpness

SBSharpness : Signal Balance Sharpness value code to be set on Monitor ( 0 ~ 100 )

r-CMD 0x7F

Val 1 SBSharpness
SBSharpness : Same as above
Display S/W, VD Business Team, Samsung Electronics 82

* Panel On Time

Function Personal Computer shows Panel On Time of TV / Monitor.
Get Panel On Time Status Header 0xAA Ack Header 0xAA

Command 0x83

r-CMD 0x83

Val 1 PTime_ H

Val 2 PTime_L
PTime_H : Panel On Time High. PTime_L : Panel On Time Low.
Display S/W, VD Business Team, Samsung Electronics 83

* Video Wall On

Function Personal Computer turns Video Wall of TV / Monitor ON/OFF. Does not operate in MagicNet.
Get Video Wall On/Off Status Header 0xAA Command 0x84 ID
Set Video Wall On/Off Header 0xAA Command 0x84 ID

Data 1 V.Wall_On

V.Wall_On : Video Wall Code to set on TV / Monitor Ack Header 0xAA Command 0xFF ID
Video Wall ON Video Wall OFF

r-CMD 0x84

Val 1 V.Wall_On
V.Wall_On : Same as above
Display S/W, VD Business Team, Samsung Electronics 84

* Temperature Control

Function Personal Computer sets the maximum value of TV / Monitor temperature. Only supports models with Temperature notification function.
Get Temperature Status Header 0xAA Command 0x85 ID
Set Temperature Status Header 0xAA Command 0x85 ID

Data 1 Temperature

Temperature : Temperature code to be set on TV/Monitor Data Ack Header 0xAA Command 0xFF ID

45 ~ 125()

r-CMD 0x85

Val 1 Temperature

Temperature : Same as above
Display S/W, VD Business Team, Samsung Electronics 85
SEC-VD-DSW External Control - 0008 * Brightness Sensor Function Personal Computer turns Brightness Sensor of TV / Monitor on/off. Only supports models with Brightness Sensor. Get Brightness Sensor ON/OFF Status Header 0xAA Command 0x86 ID
Set Brightness Sensor ON/OFF Header 0xAA Command 0x86 ID

Data 1 BR_Sensor

BR_Sensor : Power code to be set on TV/Monitor Brightness Sensor ON Brightness Sensor OFF

r-CMD 0x86

Val 1 BR_Sensor
Display S/W, VD Business Team, Samsung Electronics 86

SEC-VD-DSW External Control - 0008 * Dynamic Contrast (ATV, DTV, AV, S-Video, Component, HDMI Only) Function Personal Computer turns Dynamic Contrast of TV / Monitor on/off. Does not operate in PC, DVI and MagicNet. Get Dynamic Contrast ON/OFF Status Header 0xAA Command 0x87 ID
Set Dynamic Contrast ON/OFF Header 0xAA Command 0x87 ID

Data 1 DY_Cont

DY_Cont : Power code to be set on TV/Monitor Dynamic Contrast ON Dynamic Contrast OFF

r-CMD 0x87

Val 1 DY_Cont
Display S/W, VD Business Team, Samsung Electronics 87
* Video Wall User Control
Function Personal Computer turns Video Wall function of TV / Monitor on/off. Does not operate in MagicNet. Does not operate when PIP is at operating status. Get Video Wall Status Header 0xAA Command 0x89 ID
Set Video Wall Header Command 0xAA 0x89 ID

Data 1 Wall_Div

Data 2 Wall_SNo
Wall_Div : Video Wall Divider code set on TV/Monitor
0x00 0x11 0x21 0x31 0x41 0x51
0x00 0x12 0x22 0x32 0x42 0x52
0x00 0x13 0x23 0x33 0x43 0x53
0x00 0x14 0x24 0x34 0x44 0x54
0x00 0x15 0x25 0x35 0x45 0x55
Wall_SNo : TV/Monitor Number code set on TV/Monitor

Set Number 1 2. Data

0x01 0x02

0x18 0x19

Ack Header Command 0xAA 0xFF ID

r-CMD 0x89

Wall_Div Wall_SNo
Display S/W, VD Business Team, Samsung Electronics 88

* Model Name Control

Function Personal Computer grasps TV / Monitor Model Name and display. Get Model Number Status Header 0xAA Command 0x8A ID

Check S um

Ack Header 0xAA Val 3 Command 0xFF Val 4

0x12 Val 6

'A' Val 7

0x8A Val 8

M_Name1 M_Name2 Val 9 Val 10
M_Name3 M_Name4 M_Name5 M_Name6 M_Name7 M_Name8 M_Name9 M_Name10 Val 11 M_Name11

Val 12 M_Name12

Val 13 M_Name13

Val 14 M_Name14

Val 15 M_Name15

Val 16 M_Name16

M_Name1 ~ M_Name16 : TV / Monitor Model Name
M_Name1 M_Name2 M_Name3 M_Name4 M_Name5 M_Name6 M_Name7 M_Name8 M_Name9 M_Name10 M_Name11 M_Name12 M_Name13 M_Name14 M_Name15 M_Name16
'S' 'y' 'n' 'c' 'M' 'a' 's' 't' 'e' 'r' '4' '0' '0' 'D' 'X' 'n'
Display S/W, VD Business Team, Samsung Electronics 89