Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country EIRE U.K SAMSUNG (7267864) Customer Care Centre Web Site www.samsung.com/ie www.samsung.com

Plasma TV

user manual
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/global/register

Model Serial No.

BN68-01757D-00

BN68-01757D-Eng_.indb 1

2008-08-20 7:18:06

User Instructions

Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as screen burn. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not install and operate there. The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product. A cracking noise may occur when the product contracts or expands due to a change of surrounding environment such as temperature or humidity. This is normal and not a defect of the unit. The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

Height

Heat on the top of the PDP TV
The product is making a cracking noise.

Cell Defects

Avoid operating the TV at temperatures below 5C(41F) A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the PDP TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages. To prevent this effect, reduce the brightness and contrast when displaying still images. - Warranty does not cover any damage caused by image retention. - Burn-in is not covered by the warranty. Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substance and where it operates continually such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.

Warranty

Installation
Digital TV (DVB-T) Notice 1. FUNCTIONALITIES RELATED TO DIGITAL TV (DVB) ARE ONLY AVAILABLE IN COUNTRIES OR AREAS WHERE DVB-T (MPEG2 AND MPEG4 AVC) DIGITAL TERRESTRIAL SIGNALS ARE BROADCAST. DVB-T is the European consortium standard for the broadcast transmission of digital terrestrial television. Please check with your local dealer about the availability of DVB-T service in your area. 2. Although this TV set meets the current DVB-T standards as of [August, 2008], compatibility with future DVB-T digital terrestrial broadcast cannot be guaranteed. 3. Some Digital TV functions may not be available or operate correctly in some countries or regions. 4. For more information, please contact your local SAMSUNG customer care centre. Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. (See back cover for more informations.)
2008 Samsung Electronics Co., Ltd. All rights reserved.

English -

BN68-01757D-Eng_.indb 2

2008-08-20 7:18:08

English

Contents

Connecting and Preparing Your TV
User Instructions...2 Checking Parts...4 Using the Stand-Base...4 How to assemble the Stand-Base (depending on the model)..4 Viewing the Control Panel..5 Viewing the Connection Panel..6 Remote Control...8 Installing Batteries in the Remote Control..9 Switching On and Off...9 Placing Your Television in Standby Mode..9. Viewing the Menus...10 Using the TOOLS Button..10 Using the Wheel button..10 Plug & Play Feature...11

:7 : 95 : 45 : 50 : 50 : G50 / R50

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The Tools menu changes depending on which external input mode you are viewing. 1. Press the TOOLS button. The Tools menu will appear. 2. Press the or button to select a menu. 3. Press the / / / / ENTERE buttons to display, change, or use the selected items. For a more detailed description of each function, refer to the corresponding page. Anynet+ (HDMI-CEC): see page 53 Picture Size: see page 17 Picture Mode: see page 15 Sound Mode: see page 21 Sleep Timer: see page 26 SRS TS XT: see page 21 Energy Saving: see page 25 Dual l ll: see page 22 PIP: see page 19 Auto Adjustment: see page 19
Anynet+ (HDMI-CEC) Picture Size Picture Mode Sound Mode Sleep Timer SRS TS XT Energy Saving Dual l ll U Move : : : : : : : Auto Wide Standard Custom Off Off Off Mono E Enter e Exit

Using the Wheel button

To increase the channel number, turn the wheel clockwise when the Channel
Display is displayed. To decrease the channel number, turn the wheel counterclockwise. Control window is displayed. To turn the volume down, turn the wheel counterclockwise.
To turn the volume up, turn the wheel clockwise when the Volume
To move to a lower menu, turn the wheel clockwise when the menu Display is
displayed. To move to a higher menu, turn the wheel counterclockwise.

English - 10

BN68-01757D-Eng_.indb 10

2008-08-20 7:18:21

Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently. 1. Press the POWER button on the remote control. The message The Menu Plug & Play Language, Store Demo, Channels and Time will be set. is displayed. The Menu Language, Store Demo, Channels and Time 2. Press the ENTERE button, then Select the OSD Language. menu is will be set. automatically displayed. Press the ENTERE button. OK 3. Select the appropriate language by pressing the or button. Press the E Enter ENTERE button to confirm your choice. 4. Press the or button to select Store Demo or Home Use, then the ENTERE button. N We recommend setting the TV to Home Use mode for the best picture in your home environment. N Store Demo mode is only intended for use in retail environments. N If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds. N The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running. N The Screen Saver is activated if there is no operating signal for longer than 15 minutes. 5. Press the ENTERE button. Select the appropriate country by pressing the or button. Press the ENTERE button to confirm your choice. 6. Press the or button to select the channel source to memorize. Press the ENTERE button to select Start. N Digital & Analogue: Digital and Analogue channels. Digital: Digital channels. Analogue: Analogue channels. N The channel search will start and end automatically. N Press the ENTERE button at any time to interrupt the memorization process. N After all the available channels are stored, the message Set the Clock Mode. is displayed. 7. Press the ENTERE button. Press the or button to select Auto, then Press the ENTERE button. N If you select Manual, Set current date and time is displayed. (See page 26) N If you have received a digital signal, the time will be set automatically. If not, see page 26 to set the clock. 8. The message Enjoy your viewing is displayed. When you have finished, press the ENTERE button. If you want to reset this feature. 1. Press the MENU button to display the menu. Press the or button to select Setup, then press the ENTERE button. 2. Press the ENTERE button again to select Plug & Play. 3. Enter your 4 digit PIN number. The default PIN number of a new TV set is 0-0-0-0. N If you want to change PIN number, refer to 23 page. N The Plug & Play feature is only available in the TV mode.

Tint (G / R) Detailed Settings Picture : G50 / R50

Flesh Tone

Edge Enhancement Off / On xvYCC Off / On

Picture Options

N In PC mode, you can only make changes to the Colour Tone, Size and Screen Burn Protection from among the items in Picture Options.
Colour Tone Cool2 / Cool1 / Normal / Warm1 / Warm2

Picture Options

Picture Reset
You can select the most comfortable colour tone to your eyes. N The adjusted values are stored according to the selected Picture mode. N Warm1 or Warm2 is only activated when the picture mode is Movie.

English - 16

BN68-01757D-Eng_.indb 16
You can select the picture size which best corresponds to your viewing requirements. T Press the TOOLS button to display Tools menu. You can also set the size by selecting Tools Picture Size. Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio. 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size. 4:3: This is the default setting for a video movie or normal broadcasting. Just Scan: Use the function to see the full image without any cutoff when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are input. N Depending on the input source, the picture size options may vary. N The items available may differ depending on the selected mode. N In PC Mode, only 16:9 and 4:3 mode can be adjusted. N Settings can be adjusted and stored for each external device you have connected to an input of the TV. N Temporary image retention may occur when viewing a static image on the set for more than two hours. N Wide Zoom: Press the button to select Position, then press the ENTERE button. Press the or button to move the screen up / down. Then press the ENTERE button. N Zoom: Press the button to select Position, then press the ENTERE button. Press the or button to move the picture up and down. Then press the ENTERE button. Press the button to select Size, then press the ENTERE button. Press the or button to magnify or reduce the picture size in the vertical direction. Then press the ENTERE button. N After selecting Just Scan in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing the or button. Use the , , or button to move the picture. N Reset: Press the or button to select Reset, then press the ENTERE button. You can initialize the setting. N If you use the Just Scan function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function. N When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.
Screen Mode 16:9 / Wide Zoom / Zoom / 4:3
When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it. 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnify the size of the picture vertically on screen. 4:3: Sets the picture to 4:3 normal mode. N This function is available in Auto Wide mode. N This function is not available in PC, Component or HDMI mode. If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. N When the signal is weak, select one of the other options until the best picture is displayed. This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality. N DNIe (Digital Natural Image engine) DNIe This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIe technology will fit every signal into your eyes. N This function is not available in Movie and Standard mode. You can directly select the black level on the screen to adjust the screen depth. N This function is active only when the external input connects to HDMI (RGB signals).

Equalizer

: Custom
SRS TruSurround XT : Off Audio Language Audio Format Audio Description Auto Volume : Off : ---: ----

Equalizer

Select Speaker : TV Speaker The sound settings can be adjusted to suit your personal preferences. Mode: You can select a sound mode to suit your personal preferences. Balance: Controls the balance between the right and left speakers. 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies Reset: Resets the equalizer settings to the default values.
SRS TruSurround XT Off / On
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. T Press the TOOLS button to display Tools menu. You can also set the SRS TruSurround XT by selecting Tools SRS TS XT. TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.

Audio Language

You can change the default value for audio languages. Displays the language information for the incoming stream. N While viewing a digital channel, this function can be selected. N You can only select the language among the actual languages being broadcast.
Audio Format MPEG / Dolby Digital
When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function. N While viewing a digital channel, this function can be selected. N You can only select the language among the actual languages being broadcast. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Audio Description

This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control the volume. Audio Description Off / On: Turn the audio description function on or off. Volume: You can adjust the audio description volume. N Volume is active when Audio Description is set to On. N While viewing a Digital channel, this function can be selected.

English - 21

BN68-01757D-Eng_.indb 21

2008-08-20 7:18:26

Auto Volume Off / On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Select Speaker Sound Select

: TV Speaker : Main

Sound Reset
Select Speaker External Speaker / TV Speaker
If you want to hear the sound through separate speakers, cancel the internal amplifier. N The +, MUTE buttons do not operate when the TV Speaker is set to Off. N If you select External Speaker in the Select Speaker menu, the sound settings will be limited.
TV's Internal Speakers TV / Ext. / AV / S-Video / Component / PC / HDMI Speaker Output Mute Mute Audio Out (Optical, L / R Out) to Sound System TV / Ext. / AV / S-Video / Component / PC / HDMI Sound Output Sound Output Mute
TV Speaker External Speaker Video No Signal

Sound Select

When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
Main: Used to listen to the sound of the main picture. Sub: Used to listen to the sound of the sub picture.
T Press the TOOLS button to display Tools menu. You can also set the sound of the sub picture by selecting Tools PIP Sound Select.

Sound Reset

Reset All / Reset Sound Mode / Cancel: You can restore the Sound settings to the factory defaults.

Selecting the Sound Mode

You can set the sound mode in the Tools menu. When you set to Dual l ll, the current sound mode is displayed on the screen.
Type of broadcast Regular broadcast (Standard audio) Regular + NICAM Mono NICAM Stereo NICAM-Stereo NICAM NICAM Stereo NICAM Dual-1 NICAM Dual-2 Mono (Normal use) Dual I Stereo Dual II Mono (Forced mono) On-screen indication Mono (Normal use) Mono (Normal) Mono (Normal) Mono (Normal)
Anynet+ (HDMI-CEC) Picture Size Picture Mode Sound Mode Sleep Timer SRS TS XT Energy Saving Dual l ll U Move : : : : : : Auto Wide Standard Custom Off Off Off Mono

L Adjust

e Exit
NICAM Dual-I/II Regular broadcast (Standard audio) Bilingual or DUAL-I/II Stereo

A2 Stereo

N If the stereo signal is weak and an automatic switching occurs, then switch to the mono. N This function is only activated in stereo sound signal. It is deactivated in mono sound signal. N This function is only available in TV mode.

English - 22

BN68-01757D-Eng_.indb 22
Function Description Configuring the Setup Menu

Teletext Language

You can set the Teletext language by selecting the language type. N English is the default in cases where the selected language is unavailable in the broadcast.

English - 23

BN68-01757D-Eng_.indb 23

2008-08-20 7:18:27

Preference
Primary Audio Language / Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language /
Primary Teletext Language / Secondary Teletext Language Using this feature, users can select one of the languages. The language selected here is the default when the user selects a channel. If you change the language setting, the Subtitle Language, Audio Language, and the Teletext Language of the Language menu are automatically changed to the selected language. The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a list of languages supported by the current channel and the selection is highlighted. If you change this language setting, the new selection is only valid for the current channel. The changed setting does not change the setting of the Primary Subtitle Language, Primary Audio Language, or the Primary Teletext Language of the Preference menu.
Digital Text Disable / Enable
If the programme is broadcast with digital text, this feature is enabled. N MHEG (Multimedia and Hypermedia Information Coding Experts Group) An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system which includes data-linking hypermedia such as still images, character service, animation, graphic and video files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various fields including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), teleeducation, tele-conferencing, digital libraries and network games.
Teletext Language Preference

: ----

Digital Text
Light Effect Melody Entertainment Energy Saving PIP Software Upgrade

: Enable

: Watching TV : Off : Off : Off

Wall-Mount Adjustment

Light Effect Off / In Standby / Watching TV / Always
You can turn on/off the blue LED on the front of TV according to the situation. Use it for saving power or when the LED dazzles your eyes. Off: The blue LED is always off. In Standby: The blue LED lights while in Standby mode and it turns off when your TV is turned on. Watching TV: The blue LED lights when watching TV and it turns off when your TV is turned off. Always: The blue LED always lights. Set the Light Effect to Off to reduce the power consumption.

Melody

Off / Low / Medium / High
The TV power on / off melody sound can be adjusted. N The Melody does not play - When no sound is output from the TV because the MUTE button has been pressed. - When no sound is output from the TV because the (Volume) button has been pressed. - When the TV is turned off by Sleep Timer function.

Entertainment

The Entertainment mode enables you to select the optimal display and sound for sports, cinema and games.
Off: Switches the Entertainment function off. Sports: Provides the optimal picture and sound quality for sports. Cinema: Provides the optimal picture and sound quality for movie watching. You can experience a richer picture and

enhanced sound.

using an external game console connected to the TV. N If you set any of the three Entertainment modes to On, the settings will be locked and can not be adjusted. In addition, Picture and Sound mode settings are not allowed. If you want to make Picture and Sound mode adjustments, the Entertainment mode must be turned off. N The Entertainment settings are saved for each input source. N Entertainment mode is not activated in PC mode. O You can press the E.MODE button on the remote control repeatedly to change the Entertainment setting.
Game: Provides the optimal picture and sound quality for games. This mode accelerates the playing speed when

English - 24

BN68-01757D-Eng_.indb 24

Energy Saving

This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the Energy Saving mode option to High to reduce eye fatigue as well as power consumption. Off: Turns off the energy saving function. Low: Sets the TV to low energy saving mode. Medium: Sets the TV to medium energy saving mode. High: Sets the TV to high energy saving mode.
T Press the TOOLS button to display Tools menu. You can also set the Energy Saving option by selecting Tools Energy Saving.

Software Upgrade

To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as part of the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You are given the option to install the upgrade.

BY USB

TV Side Panel

USB Drive

Insert a USB drive containing the firmware upgrade into TV. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete. When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade. Upgrades the software using the broadcasting signal. To continue software upgrade with master power on, Select On by pressing the or button. 45 minutes after entering standby mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on slightly for the product. This phenomenon may continue for more than 1 hour until the software upgrade is completed. To display the software version information.

English - 28

BN68-01757D-Eng_.indb 28

2008-08-20 7:18:35

Network Setup

Network Selection

Select Cable or Wireless as the method to connect to the network. N The menu is activated only if the Samsung Wireless LAN Adapter for InfoLive is connected. Cable: Connect to network using a cable. Wireless: Connect to network wirelessly.
Setup Language Time : English
Network Selection : Cable
Wireless Network Setup Cable Network Setup Child Lock Change PIN Parental Lock Subtitle Teletext Language :---: On

Cable Network Setup

Internet Protocol Setup Auto Setup / Manual Setup
Network Test: You can test or confirm the network connection status after setting up the network.
N When unable to connect to a wired network If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC) used to connect to the Internet the first time. In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If your Internet service provider requires an ID or password to connect to the Internet (network), your TV may not be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internet using an Internet Sharer (Router). The internet connection may fail due to a firewall problem. In this case, contact your Internet service provider. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact a Samsung Electronics Service Center.

Wireless Network Setup

Internet Protocol Setup Auto Setup / Manual Setup Network Test: You can test or confirm the network connection status after setting up the network.
N When unable to connect to a wireless network Your TV may fail to locate an AP that is configured as a private SSID type. In this case, please change the AP settings and try again. If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC) used to connect to the Internet the first time. In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact a Samsung Electronics Service Center.

Cancelling a Shared Folder
You can cancel a shared folder on your PC. Select a folder from the Shared Folder pane and select Unshare Folder. - Method 1: Select a folder from the Shared Folder pane, select the Share menu and then select Unshare Folder. - Method 2: Select a folder from the Shared Folder pane, right-click over the selected folder and then select Unshare Folder from the pop-up menu. - Method 3: Locate the mouse pointer over a folder in the Shared Folder pane and drag&drop the folder into the My Computer pane. If a message appears asking you to confirm the cancelation, select Yes. <Method 1> <Method 2> <Method 3>
Applying the Current Settings
Perform this when synchronization is necessary due to a new shared folder or canceling a shared folder. The Set Changed State menu applies changes to shared folders to the data saved with the PC share programme. Since applying changes to the internal data is a time-consuming process, this function enables users to apply changes to the data only when required. Until the Set Changed State menu is selected, the changed state of the shared folder is not applied to the server. Changes to the shared folders are not applied to your PC until you select the Set Changed State menu. - Method 1: Select the Share menu and select the Refresh DB sub-menu. - Method 2: Click the Set Changed State icon.

English - 47

BN68-01757D-Eng_.indb 47

2008-08-20 7:19:02

Setting the Access Permission
To enable the TV to find your PC, the TV must be set to Set Device Policy in the Access Permission Settings window. In addition, the PC server and the TV must be on the same subnet. - Method: Select the Share menu and select Set Device Policy. Rejected items are represented in gray. You can change the access permissions by using the Allow Accept / Deny button. To delete an item, select the item and select Delete Item.

Server

You can run or stop using your PC as a server. You can determine whether to start the PC server automatically when Windows starts. You can rename the PC server. Enter a new name and click OK. The new name will appear at the top right of the window and will appear on the TV.
Start Server at Windows start Change server name

Version

The programme version information message box appears.

English - 48

BN68-01757D-Eng_.indb 48

Using the DLNA Function

Using the DLNA Menu
DLNA (Digital Living Network Alliance) enables content saved on a DLNA server (usually your PC) connected to your TV or over a network to be played. Wiselink Pro enables playing content saved on a USB memory device connected to the TV, while DLNA enables playing content saved on a DLNA server (your PC) connected to your TV or over the network. The procedures to use the content are the same as those for WISELINK Pro. If you install the PC share manager programme supplied with the TV onto a PC, you can have the PC perform the role of a DLNA server over the network. 1. Press the W.LINK button on the remote control to display the DLNA menu. 2. Press the or button to select an icon (Photo, Music, Movie, Setup), then press the ENTERE button. N To exit DLNA mode, press the W.LINK button on the remote control.

N If you press the Volume or MUTE button, no OSD is displayed, but the function operates accordingly.
N CONTENTS LIBRARY CONTAINS TEXT, GRAPHICS, IMAGES, MULTIMEDIA, AND OTHER MATERIALS FOR INFORMATIONAL AND PROMOTIONAL PURPOSES ONLY. MATERIALS IN CONTENTS LIBRARY HAS BEEN MODIFIED AND KEEPS BEING REVISED AND UPDATED. THE MATERIALS IN THE CONTENTS LIBRARY MAY NOT BE SUITABLE FOR ALL AUDIENCES. N INFORMATION IN THE CONTENTS LIBRARY IS PROVIDED AS IS. ALTHOUGH THE INFORMATION PROVIDED TO YOU IN THE CONTENTS LIBRARY IS OBTAINED OR COMPLIED FROM SOURCES WE BELIEVE TO BE RELIABLE, SAMSUNG CANNOT AND DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS OR COMPLETENESS OF ANY INFORMATION OR DATA MADE AVAILABLE TO YOU FOR ANY PARTICULAR PURPOSE. UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE HELD LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES WHATSOEVER ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR THE USE OF, THE CONTENTS LIBRARY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

English - 50

BN68-01757D-Eng_.indb 50

2008-08-20 7:19:04

Using the Content Library

Gallery

Art/Relaxation/Party: This function plays a SlideShow with high resolution images and background music and produces
various atmospheres. Using the Gallery function of the TV, you can change your home atmosphere. N Press the yellow button to playback all imageries. N There is default music for each for the Art, Relaxation, and Party options. N Press INFO button to see the credit and detail information in English for the imagery. Press INFO button again or press button for the credit information to go away (currently, the credit supports English only). N The copyrights of the Gallery contents and all issues related to them are reserved by Gallery Player, Inc. N For additional Gallery contents, check for information through www.samsung.com. Please refer to the Using Additional Content Using External USB Memory Storage section to see how to play additional imagery.

Cooking

Starters/Main Courses/Desserts: You can view various recipes that you can then easily follow step by step. Enjoy these
contents which give you great ideas for meals. N The recipes introduced in the Cooking contents on the Samsung TV are based on recipes published by Anness Publishing. N The copyrights of the Cooking contents and all issues related to them are reserved by Practical Pictures.

Children

Story/Song/Play: This is educational and interactive content that children can watch repeatedly. Enjoy existing stories,
songs and plays with the Boowa and Kwala characters. N The copyrights of the Children contents and issues related to them are reserved by UpToTen.

English - 54

BN68-01757D-Eng_.indb 54

2008-08-20 7:19:08

Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu View TV Device List (device_name) Menu (device_name) Operation Record: (*recorder) (*recorder) Reserve Recording Stop Recording: (*recorder) Receiver Description Anynet+ mode changes to TV broadcast mode. Shows the Anynet+ device list. Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear. Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear. Starts recording immediately using the recorder. (This is only available for devices that support the recording function.) Enables reserving a recording for the recorder. (This is only available for devices that support the recording reservation function.) Stops recording. Sound is played through the receiver.
N If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).
TV Remote Control Buttons Available in Anynet+ Mode
Device Type Available Buttons After switching to the device, when Numeric buttons the menu of the corresponding ////ENTERE buttons Anynet+ Device device is displayed on the screen. Colour buttons / EXIT button After switching to the device, while (Backward search) / (Forward search) (Stop) / (Play) / playing a file (Pause) Device with built- After switching to the device, when P / button in Tuner you are watching a TV programme Audio Device When Receiver is activated VOL / button MUTE button Operating Status
N The Anynet+ function only works when the active source on the TV remote control is set to TV. N The button works only while in the recordable state. N You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control. N The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device. N The Anynet+ functions do not operate with other manufacturers products. N The , operations may differ depending on the device.

English - 61

BN68-01757D-Eng_.indb 61
The teletext pages are organized according to six categories: Part A B C D E F Contents Selected page number. Broadcasting channel identity. Current page number or search indications. Date and time. Text. Status information. FASTEXT information.
N Teletext information is often divided between several pages displayed in sequence, which can be accessed by: - Entering the page number - Selecting a title in a list - Selecting a coloured heading (FASTEXT system)
O Press the TV button to exit from the teletext display.
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. Product Family inch 23 ~ ~ 40 LCD-TV 46 ~ 57 ~ ~ 42 ~ 58 PDP-TV ~ ~ N N N N N N N N VESA Spec. (A * B) 200 * * * * 400 (No VESA) 800 * * * * * 407 (No VESA) 800 * * * 100 Standard Screw M4 MM8 Quantity

4 M4 4

We provided the standard dimensions for wall mount kits as shown in the table above. When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set. For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifications. Do not use screws that do not comply with the VESA standard screw specifications. Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. Our 57 and 63 models do not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit for this model. Do not exceed 15 degrees tilt when mounting this TV. Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

English - 62

BN68-01757D-Eng_.indb 62

2008-08-20 7:19:21

Auto Wall-Mount Adjustment (Sold separately) (Depending on the model)
Once the auto wall mount is installed, your TVs position can be easily adjusted. Rear Panel Auto Wall-Mount

BN68-01757D-Eng_.indb 68

11. GENERAL PRACTICES REGARDING USE AND STORAGE You acknowledge that Yahoo! may establish general practices and limits concerning use of the Service, including with out limitation the maximum number of days that email messages, message board postings or other uploaded Content will be retained by the Service, the maximum number of email messages that may be sent from or received by an account on the Service, the maximum size of any email message that may be sent from or received by an account on the Service, the maximum disk space that will be allotted on Yahoos servers on your behalf, and the maximum number of times (and the maximum duration for which) you may access the Service in a given period of time. You agree that Yahoo! has no responsibility or liability for the deletion or failure to store any messages and other communications or other Content maintained or transmitted by the Service. You acknowledge that Yahoo! reserves the right to log off accounts that are inactive for an extended period of time. You further acknowledge that Yahoo! reserves the right to change these general practices and limits at any time, in its sole discretion, with or without notice. 12. MODIFICATIONS TO SERVICE Yahoo! reserves the right at any time and from time to time to modify or discontinue, temporarily or permanently, the Service (or any part thereof) with or without notice. You agree that Yahoo! shall not be liable to you or to any third party for any modification, suspension or discontinuance of the Service. 13. TERMINATION You agree that Yahoo! in its sole discretion, may terminate your password, account (or any part thereof) or use of t he Service, and remove and discard any Content within the Service, for any reason, including, without limitation, for lack of use or if Yahoo! believes that you have violated or acted inconsistently with the letter or spirit of the TOS. Yahoo! may also in its sole discretion and at any time discontinue providing the Service, or any part thereof, with or without notice. You agree that any termination of your access to the Service under any provision of this TOS may be effected without prior notice, and acknowledge and agree that Yahoo! may immediately deactivate or delete your account and all related information and files in your account and/or bar any further access to such files or the Service. Further, you agree that Yahoo! shall not be liable to you or any third-party for any termination of your access to the Service. 14. DEALINGS WITH ADVERTISERS AND MERCHANTS Your correspondence or business dealings with, or participation in promotions of, advertisers and merchants found on or through the Service, including payment and delivery of related goods or services, and any other terms, conditions, warranties or representations associated with such dealings, are solely between you and such advertiser or merchant. To the fullest extent permitted by applicable law, you agree that: (a) Yahoo! shall not be responsible or liable for any loss or damage of any kind incurred as the result of any such dealings or as the result of the presence of such advertisers and merchants on the Service, and (b) any orders placed by you on, and any product specifications and product availability appearing on, the Service (including, without limitation, Yahoo! Shopping) are subject to confirmation by, and the terms and conditions of business of, the relevant Merchant. 15. LINKS The Service may provide, or third parties may provide, links to other World Wide Web sites or resources. Because Yahoo! has no control over such sites and resources, you acknowledge and agree that Yahoo! is not responsible for the availability of such external sites or resources, and does not endorse and is not responsible or liable for any Content, advertising, products, or other materials on or available from such sites or resources. You further acknowledge and agree that Yahoo! shall not be responsible or liable, directly or indirectly, for any damage or loss caused or alleged to be caused by or in connection with use of or reliance on any such Content, goods or services available on or through any such site or resource. 16. YAHOOS PROPRIETARY RIGHTS You acknowledge and agree that the Service and any necessary software used in connection with the Service (Software ) contain proprietary and confidential information that is protected by applicable intellectual property and other laws. You further acknowledge and agree that Content contained in sponsor advertisements or information presented to you through the Service or advertisers is protected by copyrights, trademarks, service marks, patents or other proprietary rights and laws. Except as expressly authorised by Yahoo! or advertisers, you agree not to modify, rent, lease, loan, sell, distribute or create derivative works based on the Service or the Software, in whole or in part. Yahoo! grants you a personal, non-transferable and non-exclusive right and licence to use the object code of its Software on a single computer; provided that you do not (and do not allow any third party to) copy, modify, create a derivative work of, reverse engineer, reverse assemble or otherwise attempt to discover any source code, sell, assign, sublicence, grant a security interest in or otherwise transfer any right in the Software. The foregoing is subject to applicable statute and other express law. You agree not to modify the Software in any manner or form, or to use modified versions of the Software, including (without limitation) for the purpose of obtaining unauthorised access to the Service. You agree not to access the Service by any means other than through the interface that is provided by Yahoo! for use in accessing the Service. 17. DISCLAIMERS YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT: a. YOUR USE OF THE SERVICE IS AT YOUR SOLE RISK. THE SERVICE IS PROVIDED ON AN AS IS AND AS AVAILABLE BASIS. TO TH E FULLEST EXTENT PERMITTED BY APPLICABLE LAW, YAHOO! EXPRESSLY DISCLAIMS ALL WARRANTIES, CONDITIONS AND OTHER TERMS OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED TERM OF MERCHANTABILITY, SATISFACTORY Q UALITY, FITNESS FOR A PARTICULAR PURPOSE, AND ANY TERM AS TO THE PROVISION OF SERVICES TO A STANDARD OF REASONABLE CARE AND SKILL OR AS TO NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT. b. YAHOO! MAKES NO WARRANTY OR REPRESENTATION THAT (i) THE SERVICE WILL MEET YOUR REQUIREMENTS, (ii) THE SERVICE WILL BE UNINTERRUPTED, TIMELY, SECURE, OR ERROR-FREE, (iii) THE RESULTS THAT MAY BE OBTAINED FROM THE USE OF THE SERVICE WIL L BE ACCURATE OR RELIABLE, (iv) THE QUALITY OF ANY PRODUCTS, SERVICES, INFORMATION, OR OTHER MATERIAL PURCHASED OR OBTA INED BY YOU THROUGH THE SERVICE WILL MEET YOUR EXPECTATIONS, AND (V) ANY ERRORS IN THE SOFTWARE WILL BE CORRECTED.