SCC-931T(P)

1/4 High Resolution, Anti Vandal Dome Color Digital Camera, Motorized 12x Zoom Lens

Features

High impact, vandal resistant dome (Shock/water/dust proof : IP66 grade) x12 motorized optical zoom with x10 digital zoom DSP (Digital Signal Processor) 1/4 410,000 (PAL 470,000) super HAD CCD Horizontal resolution (480 TV Lines) Back Light Compensation covers various light conditions External synchronization with linelock Motion detection function with alarming output On-screen menus (Multi-language) Picture in Picture on digital zoom Remote control: RS485 (Half duplex) Power input (AC24V/DC12V compatible) Built-in ground fault isolation transformer

SCC-641(P)/SCC-643A(P)

SmartDome Camera

Dimensions (unit : mm)

Rear Panel

Specifications

SCC-931TP
Camera Type Image Color Device Size Pixels - Total Pixels - Effective System Horizontal Frequency-Internal Mode Horizontal Frequency-Line-lock Mode Vertical Frequency-Internal Mode Vertical Frequency-Line-lock Mode Color Range-Panning Range-Tilting Motion Detection D-Zoom High Speed Shutter Sense Up PIP BLC AGC Line Lock Anti Vandal Camera ID White Balance Horizontal Vertical VBS 1.0Vp-p S/N Ratio Focal Length Zoom Ratio Aperture Ratio Viewing Angle-Tele Viewing Angle-Wide Lens Drive Type OSD Output RS485 Operating Temperature Humidity Power Requirement Power Consumption LED Indicator Dimensions (WxHxD)-Net Weight-Net Loading Quantity(20/40ft) Package Size Color CCD 1/4 inch 795 x x 582 Interlace 15,625 Hz 15,625 Hz 50 Hz 50 Hz 1 Lux(Sense Up x128 : 0.01) 360 (Manual) 90 (Manual) Off/On Off ~ x10 Off ~ 1/10Ksec Off ~ x128 Off/On Off/On Off/On Off/On Yes Off/On ATW/AWC/MANUAL 480 TV Lines 350 TV Lines VBS 1.0Vp-p 52dB 3.6 ~ 43.2 mm x12 F1.8(Wide), F2.6(Tele) 4 7(H) x 3 6(V) 52 8(H) x (V) AI (DC) Yes 1 Yes -10 C ~ +50 C Less than 90% AC24V(60Hz)10%, DC12V+10%/-5% 6W Yes 132() x 96.5(H) mm 1000g 4,080/8,x 335 x 160 mm

SCC-931T

Color CCD 1/4 inch 811 x x 494 Interlace 15,734 Hz 15,750 Hz 59.94 Hz 60 Hz 1 Lux(Sense Up x128 : 0.01) 360 (Manual) 90 (Manual) Off/On Off ~ x10 Off ~ 1/10Ksec Off ~ x128 Off/On Off/On Off/On Off/On Yes Off/On ATW/AWC/MANUAL 480 TV Lines 350 TV Lines VBS 1.0Vp-p 52dB 3.6 ~ 43.2 mm x12 F1.8(Wide), F2.6(Tele) 4 7(H) x 3 6(V) 52 8(H) x (V) AI (DC) Yes 1 Yes -10 C ~ +50 C Less than 90% AC24V(60Hz)10%, DC12V+10%/-5% 6W Yes 132() x 96.5(H) mm 1000g 4,080/8,x 335 x 160 mm * Design and specifications are subject to change without notice.

Scanning

Min. scene Illumination PAN/TILT Functions

Summary

This product employs a 10x digital zoom and 22x built-in optical lens to offer up to 220x zoom and can correctly catch an object at a long distance range via the Auto Focus function. Its Digital Signal Processor (DSP) system represents clear and high quality images of objects under either bright or dark settings. It can observe objects clearly under dark circumstances by realizing high sensitivity that allows observation under minimum illumination of 0.01Lux (Sense Up x128). SCC-643A(P) have the Day/Night function as well as the Privacy Zone (8 areas) function by which the user can mask a certain area to protect privacy. This camera can be panned 360 and tilted 90 conveniently with its 64 steps of Manual Pan/Tilt operations. With the moving speed of up to 240/sec during the preset mode, user can instantly observe desired points. It provides a remote control interface of RS-485 (Full-Duplex and Half-Duplex)/ RS-422 and can organize up to 128 cameras in a single system with Samsungs exclusive controllers (SSC-1000 and SSC-2000). One of the main features of this product is that it provides various AUTO functions that can be defined by the user. Its Preset function is distinguished from that of cameras of other manufacturers. Not only it can set 128 camera locations, zooms, and focuses of cameras but it can also perform video setups for the corresponding locations. Thus user can preset and save each video control such as iris control, shutter speed and white balance. This feature enables the expansion of applications of the smart dome under an assortment of installation circumstances. The Scan function executes touring of preset locations in order to observe critical places rapidly. The camera also supports the Auto Pan function that pans the camera to observe a place designated by user at a constant speed to designated directions, and the Pattern function that saves and replays the 30 seconds Pan/Tilt/Zoom operation by user (up to 3 operations). It also provides powerful Alarm In/Out and Motion Detection functions. Four inputs and three outputs are available for the Alarm function. Alarm and motion detection functions can be used by connecting to the Preset and Pattern functions defined by the user.

Resolution Video Output S/N Ratio Lens
OSD Alarm Remote Control Environmental Conditions Power Physical Specification
* "P" indicates PAL model & "N" or no specific alphabet after the model name indicates NTSC model.
SAMSUNG ELECTRONICS CO.,LTD.

Digital Video Division

416, Maetan-3Dong, Yeongtong-Gu, Suwon City, Gyeonggi-Do, Korea 443-742 Tel: +82-31-200-5504, 5578 Fax: +82-31-200-5594 http://www.securitysamsung.com
22x (f=3.6~79.2mm) optical lens, and built-in 10x digital zoom lens (Maximum 220x zoom-in, AF function) RS-485 (Half Duplex Full Duplex)/RS-422 remote control. DSP (Digital Signal Processor) IC suitable Day & Night function (SCC-643A(P)). Minimum illumination of 0.01 Lux (SCC-641(P)) Minimum illumination of 0.01 Lux for Color, 0.003 Lux for B/W (SCC-643A(P)) 360 endless horizontal rotation and 0~90 vertical rotation. Rapid search at maximum rotating speed of 240/sec. Motion detection. Alarm in : 4Ch, Alarm out: 3Ch. More than 480 lines of horizontal resolution. Preset function (Up to 128 locations). Auto functions that can be defined by the user (Preset, auto-pan, and scan). Privacy zone function for 8 locations (SCC-643A(P)).

SCC-C6405(P)

94.5 159.5 151

SCC-641(P)

Image Device Size Pixels-Total Pixels-Effective System Horizontal Frequency-Internal Mode Horizontal Frequency-Line-lock Mode Vertical Frequency-Internal Mode Vertical Frequency-Line-lock Mode Color B/W Speed-Manual Pan Speed-Preset Pan Speed-Manual Tilt Speed-Preset Tilt Range-Panning Range-Tilting Number of Scan Number of Auto PAN Number of Preset Number of Pattern Number of Privacy Zone Day/Night Motion Detection Wide Dynamic Range D-Zoom High Speed Shutter Sense Up PIP BLC AGC Line Lock Camera ID White Balance Horizontal Vertical VBS 1.0Vp-p 52 Focal Length Zoom ratio Aperture Ratio Viewing Angle-Tele Viewing Angle-Wide OSD Input Output RS485/RS-422 Operating Temperature Humidity Power Requirement Power Consumption LED Indicator Dimensions -Net Weight-Net Loading Quantity(20/40ft) Package Size CCD 1/4 inch 641: 811 x 508, 641P: 795 x 596 641: 768 x 494, 641P: 752 x 582 Interlace 641: 15,734 Hz, 641P: 15,625 Hz 641: 15,750 Hz, 641P: 15,625Hz 641: 59.94 Hz, 641P: 50Hz 641: 60 Hz, 641P: 50Hz 0.3 Lux (Sense Up X4 30IRE), 0.01 Lux (Sense Up X128) 0.8 /sec ~ 90 /sec 240 /sec 0.8 /sec ~ 45 /sec 150 /sec 360 (endless) 0 /sec ~ 90 /sec Yes Yes(2X ~ 10X) Yes(OFF ~ 1/10K) Yes(X2 ~ X128) Yes Yes Yes Yes Max 12 Character ATW/AWC/MANUAL 480 TV Lines 350 TV Lines VBS 1.0Vp-p 52 dB 3.6 ~ 79.2 mm 22X F1.6(Wide), F3.8(Tele) 2 3'(H) x 1 7'(V) 47 9'(H) x 36 9'(V) Yes RS485 Half/Full Duplex, RS-422 -10 C ~ +50 C Less than 90% AC24V 10% 18W Yes 159.5()x177(H) 1,700g 756/1,x 308 x 275 mm

SCC-643A(P)

CCD 1/4 inch 643A: 811 x 508, 643AP: 795 x 596 643A: 768 x 494, 643AP: 752 x 582 Interlace 643A: 15,734 Hz, 643AP: 15,625 Hz 643A: 15,750 Hz, 643AP: 15,625 Hz 643A: 59.94 Hz, 643AP: 50Hz 643A: 606 Hz, 643AP: 50 Hz 0.3 Lux (Sense Up X4 30IRE), 0.01 Lux (Sense Up X128) 0.003 Lux 0.8 /sec ~ 90 /sec 240 /sec 0.8 /sec ~ 45 /sec 150 /sec 360(endless) 0 /sec ~ 90 /sec 8 Yes Yes Yes(2X ~ 10X) Yes(OFF ~ 1/10K) Yes(X2 ~ X128) Yes Yes Yes Yes Max 12 Character ATW/AWC/MANUAL VBS 1.0Vp-p 52 dB 3.6 ~ 79.2 mm 22X F1.6(Wide), F3.8(Tele) 2 3'(H) x 1 7'(V) 47 9'(H) x 36 9'(V) Yes RS485 Half/Full Duplex, RS-422 -10 C ~ +50 C Less than 90% AC24V 10% 18W Yes 159.5()x177(H) 1,700g 756/1,x 308 x 275 mm * Design and specifications are subject to change without notice.

Min. Scene Illumination PAN/TILT

Functions

SCC-C6405(P) is a camera equipped with the 1/4" Progressive Ex-View CCD suitable for WDR (Wide Dynamic Range) thus represents clear and perfect images even under backlight conditions where illumination intensity varies excessively. It employs a 10x digital zoom and 22x built-in optical lens to offer up to 220x zoom and precisly catch an object at a long distance range via the Auto Focus function. The Digital Signal Processor (DSP) system represents clear and high quality images of objects under either bright or dark settings. It can observe objects clearly under dark circumstances by realizing high sensitivity that allows observation under minimum illumination [0.007Lux (Sense Up x160)]. SCC-C6405(P) has Day/Night function that switches the camera mode between Day and Night Mode according to the brightness of the object. It also has Mosaic Privacy Zone (12areas) function by which the user can mask a certain area to protect privacy. This camera can be panned 360 and tilted 180 conveniently with its 64 steps of Manual Pan/Tilt operations. With thee moving speed of up to 400/sec during the preset mode, user can instantly observe desired points. It provides a remote control interface of RS-485 (Full-Duplex and Half-Duplex)/ RS-422 and can organize up to 128 cameras in a single system with Samsungs exclusive controllers (SSC-1000 and SSC-2000). SCC-C6405(P) provides various AUTO functions that can be defined by user as one of the main function. Its preset function can not only set 128 camera locations, zooms, and focus of cameras but also perform video setups for the corresponding locations. Thus user can preset and save each video control such as iris control, shutter speed and white balance. SCC-C6405(P) provides Scan/Autopan/Pattern function. It also provides powerful Alarm In/Out and Motion Detection functions. Four inputs and three outputs are available for the Alarm function. Alarm and motion detection functions can be used by being connected to the Preset and Auto functions defined by user.