DOCUMENT REF: MSDS Samsung SF-6800 rev3 REVISION DATE: 26 th January 2009 Page 1 of 4
MATERIAL SAFETY DATA SHEET
TONER POWDER FOR USE IN Samsung SF-6800 COMPATIBLE CARTRIDGE
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING
PRODUCT NAME SYNONYMS, TRADE NAMES APPLICATION SUPPLIER TONER POWDER FOR USE IN Samsung SF-6800 COMPATIBLE CARTRIDGE Samsung SF-6800 Toners suitable for laser printers and photocopiers PBT International Ltd Haydon Wells Somerset, BA5 3EF United Kingdom +44 (0)sales@pbtigroup.com
EMERGENCY TELEPHONE E-mail
2. HAZARDS IDENTIFICATION
Not regarded as a health or environmental hazard under current legislation. ENVIRONMENT The product is not expected to be hazardous to the environment. PHYSICAL AND CHEMICAL HAZARDS High concentrations of dust may form explosive mixture with air. HUMAN HEALTH Dust irritates the respiratory system, and may cause coughing and difficulties in breathing.
3. COMPOSITION/INFORMATION ON INGREDIENTS
HAZARDOUS SUBSTANCES PRESENT ON THEIR OWN: (present in the preparation at a sufficient concentration to give it the toxicological characteristics it would have in a 100% pure state) This preparation contains no hazardous substance in this category. OTHER SUBSTANCES REPRESENTING A HAZARD: No known substance in this category present. SUBSTANCES PRESENT AT A CONCENTRATION BELOW THE MINIMUM DANGER THRESHOLD: No known substance in this category present. OTHER SUBSTANCES WITH OCCUPATIONAL EXPOSURE LIMITS: No known substance in this category present.

4. FIRST- AID MEASURES

GENERAL INFORMATION General first aid, rest, warmth and fresh air. Do not give victim anything to drink if they are unconscious. Get medical attention if any discomfort continues. INHALATION Move the exposed person to fresh air at once. Get medical attention if any discomfort continues.4 /2 INGESTION Immediately rinse mouth and provide fresh air. Get medical attention if any discomfort continues. SKIN CONTACT Remove affected person from source of contamination. Wash the skin immediately with soap and water. Get medical attention if irritation persists after washing. EYE CONTACT Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eyelids. Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.
5. FIRE- FIGHTI NG MEASURES
EXTINGUISHING MEDIA Use fire-extinguishing media appropriate for surrounding materials. UNUSUAL FIRE &EXPLOSION HAZARDS Dust may form explosive mixture with air. Fire causes formation of toxic gases. PROTECTIVE MEASURES IN FIRE Self contained breathing apparatus and full protective clothing must be worn in case of fire.
DOCUMENT REF: MSDS Samsung SF-6800 rev3 REVISION DATE: 26 th January 2009 Page 2 of 4
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS Avoid inhalation of dust. Wear protective clothing as described in Section 8 of this safety data sheet. ENVIRONMENTAL PRECAUTIONS Ensure that waste and contaminated materials are collected and removed from the work area as soon as possible in a suitably labelled container Avoid spreading dust or contaminated materials. SPILL CLEAN UP METHODS Avoid generation and spreading of dust. Shovel into dry containers. Cover and move the containers. Flush the area with water. Collect powder using special dust vacuum cleaner with particle filter or carefully sweep into closed container.

7. HANDLING AND STORAGE

USAGE PRECAUTIONS Use mechanical ventilation in case of handling, which causes formation of dust. STORAGE PRECAUTIONS Store in tightly closed original container in a cool, dry well-ventilated place. Keep in original container.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
INGREDIENT COMMENTS WEL =Workplace Exposure Limits PROTECTIVE EQUIPMENT
PROCESS CONDITIONS Use engineering controls to reduce air contamination to permissible exposure level. RESPIRATORY EQUIPMENT No specific recommendation made, but protection against nuisance dust must be used when the general level exceeds 10 mg/m3. Wear respirator if there is dust formation. Dust filter P2 (for fine dust). HAND PROTECTION Use protective gloves. EYE PROTECTION Wear dust resistant safety goggles where there is danger of eye contact.4 /3 OTHER PROTECTION Use engineering controls to reduce air contamination to permissible exposure level. Wear dust masks in dusty areas. Wear appropriate clothing to prevent reasonably probable skin contact. HYGIENE MEASURES DO NOT SMOKE IN WORK AREA! Wash at the end of each work shift and before eating, smoking and using the toilet.

9. PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE COLOUR ODOUR SOLUBILITY MELTING POINT (C) BULK DENSITY PARTICLE SIZE Powder, dust Black Almost odourless Insoluble in water approximately >80 C 800 kg/m3 (Micron) 2-20
DOCUMENT REF: MSDS Samsung SF-6800 rev3 REVISION DATE: 26 th January 2009 Page 3 of 4
10. STABILITY AND REACTIVI T Y
STABILITY No particular stability concerns. CONDITIONS TO AVOID Avoid heat, flames and other sources of ignition. Avoid dust close to ignition sources. HAZARDOUS POLYMERISATION Will not polymerise. HAZARDOUS DECOMPOSITION PRODUCTS Fire creates: Toxic gases/vapours/fumes of: Carbon dioxide (CO2). Carbon monoxide (CO). PAH (polycyclic aromatic hydrocarbons).
11. TOXICOLOGICAL INFORMATION
TOXICOLOGICAL INFORMATION Toners are formulated on Ames negative raw materials and have been independently certified Ames negative. EEC Annex to Directive 92/69/EEC (1992) Part B Methods for Determination of Toxicity, B13 Other effects- Mutagenicity: Escherichia coli-reverse mutation assay INHALATION High concentrations of dust may irritate throat and respiratory system and cause coughing. INGESTION No harmful effects expected in amounts likely to be ingested by accident. SKIN CONTACT Powder may irritate skin. EYE CONTACT May cause temporary eye irritation. HEALTH WARNINGS Dust may irritate respiratory system. This chemical may cause skin/eye irritation.
12. ECOLOGICAL INFORMATION
ECOTOXICITY The product is not expected to be hazardous to the environment.
13. DISPOSAL CONSIDERATIONS
GENERAL INFORMATION Waste to be treated as controlled waste. Disposal to licensed waste disposal site in accordance with local Waste Disposal Authority. DISPOSAL METHODS Powder to be collected, sealed tightly in bags and disposed on approved landfills. Dispose of waste and residues in accordance with local authority requirements. European Waste Class (EWC) 18
14. TRANSPORT INFORMATION
GENERAL the product is not covered by international regulation on the transport of dangerous goods (IMDG, IATA, ADR/RID).
DOCUMENT REF: MSDS Samsung SF-6800 rev3 REVISION DATE: 26 th January 2009 Page 4 of 4
15. REGULATORY INFORMATION
RISK PHRASES NC SAFETY PHRASES P13 Not classified.
Safety data sheet available for professional user on request.
EU DIRECTIVES Safety Data Sheet according to 91/155/EC as amended Dangerous Preparations Directive 1999/45/EEC.System of specific information relating to Dangerous Preparations. 2001/58/EEC. APPROVED CODE OF PRACTICE Safety Data Sheets for Substances and Preparations. Classification and Labelling of Substances and Preparations Dangerous for Supply. GUIDANCE NOTES Workplace Exposure Limits EH40.CHIP for everyone HSG (108). NATIONAL REGULATIONS The Chemicals (Hazard Information and Packaging for Supply) Regulations 2002.No.1689. Workplace Exposure Limits 2005 (EH40) Control of Substances Hazardous to Health Regulations 2002 (as amended)

16. OTHER INFORMATION

ISSUED BY REVISION DATE REV.NO. /REPL. SAFETY DATA SHEET STATUS SIGNATURE RISK PHRASES IN FULL NC R20 R51/53 Not classified Harmful by inhalation Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment Technical Department 26 th January 2009 Rev 3 Approved D.Ball
DISCLAIMER This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is, to the best of the companys knowledge and belief, accurate and reliable as of the date indicated. However, no warranty guarantee or representation is made to its accuracy, reliability or completeness. It is the users responsibility to satisfy himself as to the suitability of such information for his own particular use.

Productos

http://www.samsung.com/uk/products/printsolutions/faxes/printpage/.
Home > Products > IT & Business > Print Solutions > Faxes Faxes

SF6800

Description Corporate Laser Fax
Features Paper: Engine - Laser Fax: Memory Size (Pages) - 400 Quick Scan - 3 sec's Copy/Print: Print Speed (Mono/Colour) - up to 8ppm/-** (see specification)
Specification Engine - Laser Auto Document Feeder (Sheets) - 50 Paper Supply/Option - 250/250 Fax: Modem (Kbps)/TX Speed - approx 14.4/6 sec's* Memory Size (Pages) - 400 Direct/PC - Direct Auto Fax/Tel Switch - Yes Quick Scan - 3 sec's Delay Send - Yes Handset/On-Hook Dial - Yes Speed Dial - 20+150 Alpha Dialling (Phone Book) - Yes Auto Redial - Yes Duel Access - Yes Battery Back-Up - Max. 7 days Copy/Print: Multi Copy (pages) - 99 Copy Collection (123,123) - Yes Print Speed (Mono/Colour) - up to 8ppm/-** Greyscales - 64 Reduction/Enlargement - 50-200% Consumables: Consumable Product Code - SF-6800D6 Standard Page Yield (5% Coverage) - approx 6000*** Ink Save Mode - Yes Size: Dimensions (WxDxH mm) - 386x405x270 Additional Features - Priority TX, Image TX report, Low toner alert, Help button * Condition: Standard Resolution, MMR (JBIG), 33,6Kbps, Phase "C" by ITU-T No1 Chart, Memory Tx, ECM. ** Print Speed will be affected by Operating System used, computing performance, application

1 of 2

16/08/2006 12:05
software, connecting method, media type, media size and job complexity. *** Yield may be affected by operating environment, printing interval, colour/black, media type and media size.

2 of 2