SHR-4160(P)
16 Channel Standalone Digital Video Recorder

Features

16 Channel video 360(300)ips recording capability High picture quality : MPEG4 Remote monitoring and control through network (LAN) Convenient search function with JOG/Shuttle Various recording (Normal, schedule, motion, alarm, panic) Recording during replay (Triplex) USB 2.0 Interface : USB memory/USB external HDD/ external CD-RW, DVD-RW backup Various N/W environments support (LAN : Static/Dynamic, ADSL : Static/Dynamic (PPPoE))

SHR-2040(P)

4 Channel Standalone Digital Video Recorder

Rear Panel Front Panel

Dimensions (unit : mm)

DVR COMBO SHR-4160

FOCUS+

FOCUS_

FREEZE

SEARCH

NETWORK

BACK UP

REC PANIC REC LOCK ZOOM

Specifications

SHR-4160P
Operating System Storage Internal Capacity External Video Inputs Outputs Basic Max. Expansion USB HDD IEEE 1394 Composite Composite Through Composite S-Video VGA Embedded OS 120GB 250GB x 4 1EA. (Max. 250GB) Max. 6EA(Daisy Chain Connection), Max. HDD size : 1.5TB(250GB x 6) 16Ch 16Ch 2Ch(Main, Spot) 1Ch 1Ch MPEG4 10~11KB(352x288), 15~16KB(720 x 288), 23~30KB(720 x 576) 8.5~9.5KB(352x288), 13~14KB(720 x 288), 18~20KB(720 x 576) 6.5~8KB(352x288), 9.5~11.5KB(720 x 288), 14~16KB(720 x 576) 3~5KB(352x288), 6KB(720 x 288), 10~12KB(720 x 576) x 576 Time Lapse, Event(Alarm/Motion/Video Loss), Schedule(Time/Date/Camera), Emergency REC(Panic) Calendar Search, Event Search(Alarm/Motion/Video Loss), Data/Time Search, Go to First/Last Search, Backup Search Play, Stop, Pause, FF, FB, Jog, Shuttle 300(352 x 288), 200(720 x 288), 100(720 x 576) CIF(352x288), Half D1(720 x 288), Full D1(720 x 576) 0, 3, 5, 10, 20, 30 sec Single, Division(4, 6, 7, 8, 9, 16), PIP, Sequence, Freeze, x2 Zoom 8Ch, RCA 1Ch, RCA G. 726 8Ch 16 Alarm In 4 Alarm Out, 1 Alarm Reset 5, 10, 20, 30 sec 5, 10, 20, 30 sec, 1, 3, 5, 10, 20 min Area setting Ethernet : 10/100 Base T, ADSL Static IP, ADSL Dynamic IP(PPPoE) Cable Network(Dynamic IP) USB2.0(Front 1, Rear 1 port, External HDD, USB Memory, External CD-RW, DVD-RW, IEEE 1394(Rear 1 port, External HDD) PTZ Device Control, System Key Board Yes Triplex AC 100~240V, 50/60Hz 6.5kg 430 x 88 x 400 mm 559 x 517 x 204 mm

SHR-4160

120GB 250GB x 4 1EA. (Max. 250GB) Max. 6EA(Daisy Chain Connection), Max. HDD size : 1.5TB(250GB x 6) 16Ch 16Ch 2Ch(Main, Spot) 1Ch 1Ch 8.3~9.2KB(352 x 240), 12.5~13.3KB(720 x 240), 19.2~25KB(720 x 480) 7.1~7.9KB(352 x 240), 10.8~11.7KB(720 x 240), 15~16.7KB(720 x 480) 5.4~6.7KB(352 x 240), 7.9~9.6KB(720 x 240), 11.7~13.3KB(720 x 480) 2.5~4.2KB(352 x 240), 5~6.1KB(720 x 240), 8.3~10KB(720 x 480) x 480 Time Lapse, Event(Alarm/Motion/Video Loss), Schedule(Time/Date/Camera), Emergency REC(Panic) Calendar Search, Event Search(Alarm/Motion/Video Loss), Data/Time Search, Go to First/Last Search, Backup Search Play, Stop, Pause, FF, FB, Jog, Shuttle 360(352 x 240), 240(720 x 240), 120(720 x 480) CIF(352 x 240), Half D1(720 x 240), Full D1(720 x 480) 0, 3, 5, 10, 20, 30 sec Single, Division(4, 6, 7, 8, 9, 16), PIP, Sequence, Freeze, x2 Zoom 8Ch, RCA 1Ch, RCA G. 726 8Ch 16 Alarm In 4 Alarm Out, 1 Alarm Reset 5, 10, 20, 30 sec 5, 10, 20, 30 sec, 1, 3, 5, 10, 20 min Area setting Ethernet : 10/100 Base T, ADSL Static IP, ADSL Dynamic IP(PPPoE) Cable Network(Dynamic IP) USB2.0(Front 1, Rear 1 port, External HDD, USB Memory, External CD-RW, DVD-RW, IEEE 1394(Rear 1 port, External HDD) PTZ Device Control, System Key Board Yes Triplex AC 100~240V, 50/60Hz 6.5kg 430 x 88 x 400 mm 559 x 517 x 204 mm
Very High(Level 7, 8) High(Level 6, 5) Standard(Level 4, 3) Low(Level 2, 1) Display Speed(images/sec) Display Resolution Recording Recording Mode /Search Search / PB Mode Search PB Recording Speed(Images/sec) Recording Resolution Auto Switching Live Division Screen Audio Inputs Outputs Compression Recording Alarm Inputs Outputs Pre Alarm Post Alarm Motion Detection Network Backup Serial I/F(RS-485) Watermark Multiplex function Power Requirements Weight Dimensions(WxHxD)mm Packing
Compression Compression Rate

Summary

SHR-2040(P) is a 4-channel MPEG4 real time Digital Video Recorder capable of 120(100)ips recording rate in CIF mode. It can also record the 4-channel synchronized audio and various kinds of resolution (CIF/Half D1). * CIF : 352x240(352x288) Half D1 : 720x240(720x288) Each channel provides variable record rate to save HDD consumption. External interface method is USB 2.0 (Front:1, Rear:1).

* "P" indicates PAL model & "N" or no specific alphabet after the model name indicates NTSC model.
* Design and specifications are subject to change without notice.
SAMSUNG ELECTRONICS CO.,LTD.

Digital Video Division

416, Maetan-3Dong, Yeongtong-Gu, Suwon City, Gyeonggi-Do, Korea 443-742 Tel: +82-31-200-5504, 5578 Fax: +82-31-200-5594 http://www.securitysamsung.com
4 Channel video & audio realtime recording capability. High picture quality : MPEG4 Remote monitoring and control through network (LAN) Various recording (Normal, schedule, motion, alarm) Recording during replay (Triplex) Various N/W environments support (LAN : Static/Dynamic, ADSL : Static/Dynamic (PPPoE)) USB2.0 Interface : USB memory/USB external HDD/ external CD-RW, DVD-RW backup

SHR-2042(P)

4-Channel Standalone Digital Video Recorder with built-in CD-RW

Front Panel

ALRAM DIGITAL VIDEO RECORDER SHR-4 PTZ ZOOM FREEZE

NETWORK BACK UP

PRESET

SHR-2040P

Operating System Storage Internal Capacity External Video Inputs Outputs Compression Compression Rate Basic Max. Expansion USB HDD Composite Composite Through Composite S-Video Embedded OS 120GB 250GB x 2 1EA (Max. 250GB) 4Ch 4Ch 2Ch(Main, Spot) 1Ch MPEG4 12KB(352x288), 24KB(720 x 288) 7KB(352x288), 14KB(720 x 288) 4.9KB(352x288), 9.9KB(720 x 288) 3KB(352x288), 6KB(720 x 288) x 576 Time Lapse, Event Alarm/Motion/Video Loss, Schedule(Time/Date/Camera) Event Search(Alarm/Motion/Video Loss), Data/Time Search, Go to First/Last Search, Backup Search Play, Stop, Pause, FF, FB, Forward, Fame Advance, Reverse Frame Advance 100(352 x 288), 50(720 x 288), CIF(352 x 288), Half D1(720 x 288) 0, 3, 5, 10, 20, 30 sec Single, Quad, PIP, Sequence, Freeze, x2 Zoom 4Ch, RCA 1Ch, RCA ADPCM 4Ch 4 Alarm In 2 Alarm Out, 1 Alarm Reset 5, 10, 20, 30 sec 5, 10, 20, 30 sec, 1, 3, 5, 10, 20 min Area setting Ethernet : 10/100Base T, ADSL Static IP, ADSL Dynamic IP(PPPoE) Cable Network(Dynamic IP) Front 1, Rear 1 port, External HDD, USB Memory, External CD-RW PTZ Device Control, System Key Board Yes Triplex DC12V, 4.5A(External Adaptor) 3.3kg 215 x 88 x 337 mm 436 x 329 x 189 mm

SHR-2040

Embedded OS 120GB 250GB x 2 1EA (Max. 250GB) 4Ch 4Ch 2Ch(Main, Spot) 1Ch MPEG4 10KB(352x240), 20KB(720 x 240) 5.9KB(352x240), 12.8KB(720 x 240) 4.1KB(352x240), 8.2KB(720 x 240) 2.5KB(352x240), 5KB(720 x 240) x 480 Time Lapse, Event Alarm/Motion/Video Loss, Schedule(Time/Date/Camera) Event Search(Alarm/Motion/Video Loss), Data/Time Search, Go to First/Last Search, Backup Search Play, Stop, Pause, FF, FB, Forward, Fame Advance, Reverse Frame Advance 120(352 x 240), 60(720 x 240) CIF(352 x 240), Half D1(720 x 240) 0, 3, 5, 10, 20, 30 sec Single, Quad, PIP, Sequence, Freeze, x2 Zoom 4Ch, RCA 1Ch, RCA ADPCM 4Ch 4 Alarm In 2 Alarm Out, 1 Alarm Reset 5, 10, 20, 30 sec 5, 10, 20, 30 sec, 1, 3, 5, 10, 20 min Area setting Ethernet : 10/100Base T, ADSL Static IP, ADSL Dynamic IP(PPPoE) Cable Network(Dynamic IP) Front 1, Rear 1 port, External HDD, USB Memory, External CD-RW PTZ Device Control, System Key Board Yes Triplex DC12V, 4.5A(External Adaptor) 3.3kg 215 x 88 x 337 mm 436 x 329 x 189 mm

Very High High Standard Low Display Speed(images/sec) Display Resolution Recording Recording Mode /Search Search / PB Mode Search PB Recording Speed(Images/sec) Recording Resolution Auto Switching Live Division Screen Audio Inputs Outputs Compression Recording Alarm Inputs Outputs Pre Alarm Post Alarm Motion Detection Network Backup USB 2.0 Serial I/F(RS-485) Watermark Multiplex function Power Requirements Weight Dimensions(WxHxD)mm Packing
The SHR-2042 offers 4-channel MPEG4 Real time Digital Video Recorder capable of 120(100)ips record rate.(in CIF mode) The SHR-2042 also record the 4-channel synchronized audio. The DVR can record various kinds of resolution(CIF/Half D1) Each channel provides variable record rate features to save HDD consumption. External interface methods are USB2.0(Front:1, Rear:1). *.CIF : 352x240(352x288) Half D1 : 720x240(720x288)

Safety Regulations Before we start Standards Approvals
1 1-1 1-2 1-2-1 2-2 2-3-1 3-3 3-5 3-6 3-4-1 4-2 4-5 4-6 4-7 4-8

Chapter 1 Overview

1. Introduction 2. Features 3. Part Names and Functions

Chapter 2 Installation

1. Installation Environment Setup 2. Checking Product & Accessory 3. HDD Addition
Chapter 3 Connecting with Other device
1. Connecting Video, Audio, & Monitor 2. Connecting the Network 3. Connecting the USB 4. Connecting the Alarm Input/Output 5. Connecting the RS-485 Device

Chapter 4 Live

1. System Operation 2. Live Screen Mode 3. Live Channel Selection and Audio On/Off Setup 4. Freeze and Zoom 5. Event Monitoring 6. Spot-out Monitoring

Page v

5 5-1 5-2 5-12 5-16 5-18 5-20 5-25 5-27 5-28 5-6-1 6-3 6-4 6-6 6-7 6-7-1 7-2 7-8-1 8-2 8-3 8-4 8-5 8-6 8-7 8-8

Chapter 5 Menu Setup

Before Use 1. System 2. Camera 3. Monitoring 4. Recording Mode 5. Event Record Mode 6. Record Schedule 7. Backup 8. Network 9. Network Setup
Chapter 6 PTZ Camera Control
1. PTZ camera Control Mode 2. Basic Operation of PAN, TILT, & ZOOM 3. Preset Setup 4. Camera Menu Setup 5. Preset View 6. Other View

Chapter 7 Recording

1. REC (Normal Recording) 2. Schedule Recording 3. Event Recording
Chapter 8 Search and Play
Before Use 1. Calendar Search 2. Event Search 3. Date/Time Search 4. Go to First Search 5. Go to Last Search 6. Backup 7. Playback

Page vi

9 9-1 9-2 9-3 9-4 9-7 9-8 9-9 9-23 9-10-1 10-4 10-5 10-7 10-9 10-11

Chapter 9 Smart Viewer

1. Introduction 2. Feature 3. PC Specification(Recommendation) 4. Smart Viewer Installation 5. Smart Viewer Program Execution 6. Smart Viewer Initial Screen 7. Monitoring Mode 8. Search Mode 9. Setup Mode

Appendix

1. Product Specification 2. The specification of HDD and peripheral device 3. Outline Drawings 4. Factory Default 5. Smart Viewer Frame Specification for the Playback 6. Troubleshooting(FAQ)

Page 1

Page 1-1

Introduction

The Digital Video Recorder(DVR) compresses the 4 channel of camera input data into the MPEG4 video file and the 4 channel of voice input data into the ADPCM audio file in the real time to record them in the Hard Disk or retrieve them from the Hard Disk simultaneously. In addition, it transfers the Video/Audio out through a network in the real time and it is able to monitor the Video/Audio remotely by your PC.

Page 1-2

Features
4 CH Composite Input Connectors NTSC / PAL Video Source Compatible ( NTSC : SHR-2040/SHR-2041/SHR2042, SHR-2040N / SHR-2041N / SHR-2042N PAL : SHR-2040P/SHR-2041P/SHR2042P)

BRACKET-HDD

Page 2-7
4. Pull BRACKET-HDD to the product center to detach the fixed part at the bottom and detach BRACKET-HDD from the product.
5. Tighten 4 special screws(BWH,6-32UNC,L10.5), supplied as an accessory to fix HDD to BRACKET-HDD. (A force to tighten the screw shall be strong enough to resist vibration.)

Page 2-8

6. Reattach HDD to the original position of BRACKET-HDD. (Assembly shall be done in the reverse procedure of disassembly as follows. Align the 5 fixing points at the bottom with the BRACKET-HDD fixing holes respectively and push BRACKET-HDD out of the product to align the screw fixing holes. Then, tighten the screws firmly.)
7. Check if BRACKET-HDD has been fixed to the product and connect both the power supply cable and the signal transmission cable (IDE CABLE) to the HDD.
Signal Transmission Cable (IDE Cable)

Power Supply Cable

Page 2-9
8. Check the connector, wiring, and cable fixing condition inside the product and close the cover. 9. Tighten cover-fixing screws. (5 points on both sides and 1 point in the back side) You can apply 2 HDDs to each BRACKET-HDD as shown in the figure.
For HDD addition, please select the same HDD with the existing HDD fixed to the product as far as possible. - SHR-2040 : 1 at Primary Slot and 1 at Secondary Slot respectively - SHR-2041 : 2 at Primary Slot and 2 at Secondary Slot respectively - SHR-2042 : 2 at Primary Slot and 1 at Secondary Slot(The internal CD-RW is connected to the secondary master.) respectively Both HDDs attached to Primary Slot and Secondary Slot should be set to Master and Slave respectively. Refer to Users Manual for Master or Slave Jumper Setting. In the event of only one HDD installation, it shall be inserted into the Primary slot.
Refer to Appendix 2 to see which HDD specifications are supplied.

Page 2-10

! Regarding the sub fan, you need additional brackets and sub fans as follows. The sub fan is shaped like this when viewed from the front and back. Please pay attention to the fan direction to let wind go through the fan.

@ Fix the fan as follows

Page 2-11
# Please install the fan which is seen at the right from the front view of SHR-set as follows.

Page 2-12

$ The cable should be out from the left hole.

Page 2-13

Chapter 3 Connecting with other device

Page 3-1

Connecting the Video, Audio, and Monitor

Page 3-2

Page 3-3

Connecting the Network

Connecting to Internet through Ethernet(10/100BaseT)
Connecting to Internet through ADSL

Page 3-4

Page 3-5

Connecting the USB

1. There are two USB connecting ports on the front and back of SHR-2040/2041/2042. 2. USB Hard Disk, USB CD/DVD, and USB Memory are connected through the front and back ports of SHR-2040/2041/2042. 3. Only one USB device can be connected with each USB connecting port. 4. If the USB HDD is connected to the system, it should be detected and set through Menu - System - HDD setup before the operation. 5. It supplies the function of HOT PLUG, which connects/removes the USB device, during the system operation.
See 5-8 System (HDD Setup) of Users Manual.
- Wait until the USB device connected by hot plug is stabilized enough and click CONNECT in SHR-2040 / 2041 / 2042 MENU before use. - USB port on the front and back of SHR-2040/2041/2042 cannot be connected to same kinds of USB device. (For example, the case is that 2 CD-RW devices or 2 USB Memories are used by connection with the front and back of system.) - If you use the USB Memory on SHR-2040/2041/2042, it should be composed of the format being supported by SHR-2040/2041/2042. Although you format it with FAT32 format on PC, it will be re-formatted, in case of (when) connecting with SHR- 2040/2041/2042.
- The hard disk of USB device should be set to Master.

Page 3-6

Connecting the Alarm Input/Output
The Alarm IN/OUT port in the back of SHR-2040/2041/2042 is composed of the following elements.

ALARM IN/OUT Connection

1 - ALARM IN1 - ALARM IN2 - ALARM IN3 - ALARM IN4

ALARM Input Port

- ALARM RESET IN
On receiving an ALARM RESET signal, the system cancels the current ALARM input and output signal and then resumes sensing.
- ALARM OUT1 - ALARM OUT2

ALARM Output Port

Page 3-7

Page 3-8

Connecting the RS-485 Device
Connect the RS-485 Device through the back port of SHR- SHR-2040/2041/2042. You can install and control the PTZ camera supporting the RS-485 communication.
You can adopt either Half Duplex or Full Duplex method for the connection.
PTZ device Half Duplex Type Data () Tx() Data (+) Tx(+) SHR-2040/2041/2042 Rear
Full Duplex Type Rx(+) Rx() Tx() Tx(+)

Rx() Rx(+)

Baud Rate supports 600/1200/2400/4800/9600/19200/38400.
Check if RS-485 device is compatible with SHR-2040/2041/2042 first. Then pay attention not to change the polarity(+, -) of RS-485 when connecting it.

Page 4

Page 5

Page 4-1

System Operation
Turn the power on and the following LOGO pops up on the screen.

Page 5-22

Alarm Detection Setup
Off : Sensor does not operate. N.O(Normal Open) Sensor : Sensor remains open all the time and if closed, an alarm will be issued. (A Contact) N.C(Normal Close) Sensor : Sensor remains closed all the time and if open, an alarm will be issued. ( B Contact) Cam
Sets a camera that will synchronize with the current sensor. The default value is currently set to the sensor number. A sensor shall be synchronized with at least a camera. Multi-selection is possible.

Alarm-out

Sets the Alarm-Out when Alarm Sensor sounds. 5 Alarm Outs are supported un the present. Choose an alarm-out that you want to synchronize with the current sensor. Multi-selection is possible.

Beep-Out

Sets the Alarm-Out Duration. Alarm-Out continues for the set value. Off / 3sec / 5sec / 10sec / 20sec / 30sec

4:59 PM

Page 5-23

Motion Detection Setup

Motion Detection Mode
Off : Motion Detection does not operate On : Motion Detection operates.
Selects the Motion Detection area. It is composed of 45x40(NTSC)/45x48(PAL) sized Block. It is impossible to set 4 block rows(Up/Down/Left/Right) to allow them to be displayed in all monitors. Select All : Selects the whole area. Select Block : Selects a block every time. Selection is done by a toggle system. Select Quarter : Splits the whole area into 4 pieces, which enables selecting a fourth of the whole area. Clear All : Cancels the whole area. Save & Exit : Saves and exits. Exit : Exits without saving.

Page 5-24

Sensitivity
Sets the sensitivity of motion detection. Sensitivity grade consists of Low Medium Very High in the ascending order.

Alarm-Out

Sets the Alarm-Out when Motion occurs. 5 Alarm Outs are supported. Select an alarm-out that you want to synchronize with the current motion channel. Multi-selection is possible.
Sets the Alarm-Out Duration. Alarm-Out continues for the determined duration. Off/ 3sec/ 5sec/ 10sec/ 20sec/ 30sec
Video Loss Detection Setup

Video Loss State

Off : Video Loss does not operate. On : Video Loss operates.
Selects the Alarm-Out when the current Video Loss occurs. 3 Alarm Outs are supported in the present. Select an alarm-out that you want to synchronize with the current motion channel. Multi-selection is possible.
Sets Alarm-Out Duration. Alarm-Out continues for the determined duration. Off/ 3sec/ 5sec/ 10sec/ 20sec/ 30sec

Page 5-25

Record Schedule
This setup selects a time to record automatically. Selection by the day or by the time is available. The default value is set to Event Record.
Press CH > copies the value of Channel 1 to all the channels. The horizontal axis numbered from 0 to 23 represents the time value. The vertical axis numbered from S to H represents the day value. (H : Holiday) Selection by the day or by the time is available. Pressing ALL converts the overall setting of the selection window into Continuous Event Record Schedule/Event Record. Record Schedule Recording starts automatically on the preset time. Recording follows the condition that set in 5-18.Record Mode. Refer to 7-2 Record Schedule. Event Recording Recording starts automatically when an event (Alarm/Motion Detection/Video Loss) occurs within a setup time. Recording follows the condition that set in 5-20.Event Record Mode setup. Refer to 7-3 Event Recording. Schedule Record is yellow, Event Record is Blue, and Schedule/Event Record is red.

Page 5-26

Schedule / Event Record
On occurrence of Event, Continuous Recording is replaced with Event Recording Mode.

Holiday

If you press Holiday, a calendar pops up and you are able to designate holidays. Move to a date and press Enter to complete designation. Press Enter once more to cancel designation. H at the bottom of the table means a holiday.

Page 5-27

Backup
If there is a device, the free space and the backup device is displayed. Select a date, time, and camera No. to backup, and press Start. When you change Start Date/Time or End Date/Time, free space keeps updated in the Free Space zone. A file name is composed of Folder/File Name. A folder is composed of the backup date(YYYYMMDD) while a file name is composed of the time(HHMM). A file may be renamed by the virtual keyboard. A file name can composed of the maximum 5 letters. In case that more than one backup device is connected, click the box in the bottom of left corner to select a backup device. If there is no backup device, Warning sign pops up. Select and connect Backup Device in 5-8.HDD Setup and proceed the backup. Press the Stop to stop the backup. Pressing Cancel during the Backup returns to the upper menu but this does not affect the backup process. In case of USB HDD, the AVI check is impossible.
[In Backup Process] Pressing THE Cancel returns to the upper menu but this does not affect Backup process. Press Stop to stop the backup. The speed of the set may down during the backup.
SHR-2040 supports the internal CD-R/W. CD-R/W.
In case of AVI backup, the backup playback is available in the PC, but it is not available in the set.

Press the Preset button in front of SHR-2040/2041/2042 to return to the upper menu from camera menu.

Page 6-7

Preset View
Preset setup allows your movement to a certain saved position of PTZ Camera. Press the VIEW button in front of SHR-2040/2041/2042 in Single Screen PTZ Camera Control Mode to select Preset.(For example, Samsung Protocol) PTZ TELE WIDE VIEW PRESET
(For example, Samsung Protocol)
Control the cursor until it reaches a preset position number that you want to move and you can check it in the right PIP Screen.

Page 6-8

Other View
Press the VIEW button in front of SHR-2040/2041/2042 in Single Screen PTZ Camera Control Mode to supply PTZ Camera. This is a very special function.
Samsung, Panasonic, PelcoP, or PelcoD Protocol PTZ Camera supports this function. Samsung : Auto Pan / Scan / Pattern Panasonic : Auto Pan / Sequence / Sort Pelco(P,D) : Auto Scan / Frame Scan / Pattern PTZ

Preset

Auto Pan

Pattern

Sequence

Preset Auto Scan

Frame Scan

Samsung

Panasonic
After you select a function, press Enter. Then the function will be checked and start running. If you select other function during the operation, the previous function will be unchecked and the current function will be checked.
If you put P/T/Z/ during the operation or enter the Preset Setup or Camera Menu Setup during the operation, the function in action will be suspended and unchecked. Restarting SHR-2040/2041/2042 system during the operation has no effect. The function continues its duty and remains checked.

Page 6-9

Page 7-1

REC (Normal Recording)

Pressing REC the button starts recording as set in the record mode. Then, REC LED lights on and a recording icon appears on the screen. During the recording in HDD, the front HDD LED blinks. During the normal recording, you can stop it by pressing the REC button. If the recording stops, REC LED lights out.

Warning

If the work that has to stop the recording(Time change, File delete, HDD connect/disconnect etc.) is performed during the recording, the current recording stops.

Page 7-2

Schedule Recording
While Record Schedule or Schedule/Event recording is selected in the Record Schedule menu, Schedule Recording automatically starts. Otherwise, Schedule Recording remains inactivated. During the Schedule Recording, Recording Icon appears on the screen. During the recording in HDD, the front HDD LED blinks.

SHR-2040/2041/2042-ENG-2

5:2 PM

Page 9

Page 9-1
Smart Viewer is a program that a general PC user is able to install SHR-2040/2041/2042 to his PC to monitor the video and audio data in the real time through network without going to the site where SHR-2040/2041/2042 is installed.

Page 9-2

Feature
Thanks to the transmission of video data compressed by the MPEG-4 Video Compression method, it can play the video images of good quality. Thanks to the G.726 Voice Compression method, it supplies the voice data of good quality. Use of armored MIC improves the quality of remote voice. Thanks to the transmission of video/audio stream through RTP(Real-Time Transport Protocol), the real-time video playback is excellent and multi-users simultaneous connection does not affect the transmission speed in whole abruptly. Command & Control by RTSP(Real-Time Streaming Protocol) enables safety control through the network. Variable transport protocols are supported (TCP/IP, UDP(Unicast, Multicast)). Connection is open to you at any time to monitor video and audio data by inputting IP Address only. You can not only perform real-time recording(*.dvr format) with Users PC whereas necessary during the monitoring but also convert recorded video files(*.dvr format) into frame unit images((JPEG format). Up to 3 Smart Viewer users are allowed to connect to a DVR simultaneously. (If the multicast is used, up to 6 users can connect.) With a Smart Viewer, you are allowed to connect to as many as 9 SHR-2040/2041/2042s to monitor them simultaneously. Smart Viewer is optimized in the resolution of 1024X768.

Page 9-3

PC Specification(Recommendation)
OS : Win98SE, WinMe, Win2000, WinXP Recommendation : CPU Pentium 3 1GHz or higher RAM 256 MB or higher VGA RAM 32Mb or higher DirectX 8.1 or higher
Depending on Recording Rate, Video Size, and users PC specification set to SHR-SHR-2040/2041/2042, the number of Smart Viewer playback frame varies. For the detailed specification, refer to Appendix 5.

Page 9-4

Smart Viewer Installation
Put a Smart Viewer Program CD in CD-ROM and open the Smart Viewer folder in the CD.

Run the Setup.exe file.

Page 9-5

Click the Next button.

If you agree with Smart Viewer License, click Yes.
Designate a folder to install Smart Viewer in it and click Next.

Page 9-6

The system proceeds with setup file installation and system setup.
Installation is complete. Click the Finish to terminate the installation.

Page 9-13

Event Log Display Window
- Click the Log button to activate the log display window. - It displays the event(alarm, user connection, and setup change) occurring at SHR-2040/2041/2042 in the real-time.
[Event Message] Connecting. : Trying to connect to SHR-2040/2041/2042. Connected. : Succeeded connecting to SHR-2040/2041/2042. Connection Failed : Failed in connecting to SHR-2040/2041/2042. Disconnected. : Finished connecting to SHR-2040/2041/2042. Setup(Remote) : SHR-2040/2041/2042 setup at Dvr Setup of Viewer changed. Setup Start / End (Local) : Start/Finish the Menu screen at SHR-2040/2041/2042. Video Loss CH[N] : Video Loss at the N channel of SHR-2040/2041/2042 encountered. Alarm Detection CH[N] : Alarm issued at the N channel of SHR-2040/2041/2042. Motion Detection CH[N] : Motion detected at the N channel of SHR-2040/2041/2042. Time Change : Date/Time of SHR-2040/2041/2042 changed. Load Factory Default : SHR-2040/2041/2042 System initialized. Network Change : SHR-2040/2041/2042 Network setup changed. System Shutdown : SHR-2040/2041/2042 System terminated. Hdd Format : SHR-2040/2041/2042 HDD initialized. Disk Full : No more space in SHR-2040/2041/2042 HDD. Power Failure Recovery : SHR-2040/2041/2042 resumed after power failure. Backup Start/End/Fail/Stop : Backup at SHR-2040/2041/2042 started/finished/failed/stopped. Network Traffic Busy : Data transport in the network is not smooth. Access Denied(Limit Over) : Over connection.

Page 9-14

When Time Change, Load Factory Default, Network Change, System Shutdown, or Hdd Format event occurs, Smart Viewer terminates the connection automatically.
Camera connection Indication Window
- Displays the connection condition of DVR and CAMERA in the list.
[DVR Icon Color] Successfully connected to SHR-2040/2041/2042, the icon turns yellow, otherwise, turns black. [DVR Icon Color] Connected to CAMERA for monitoring, the icon turns yellow. Connectable, the icon turns blue, otherwise, turns black.

Page 9-15

Screen Split Selection Button
- Small Sized Single / Single / Quad / Nine-Split Mode Sixteen-Split Mode - You can change the Split Mode of the screen under monitoring.

Sequence Mode Button

- Changes the channel to be played at the preset interval. - The sequence time interval can be set at the Setup Mode?Viewer Setup. - In Single Mode : 1 (CH) - In Quad Mode : 1,2,3,4 1,2,3,4 (CH) - In Nine-Split Mode : 1,2,3,4 -> 1,2,3,4(CH) - In Sixteen-Split Mode : 1,2,3,4 1,2,3,4 (CH)

If you connected with multi-DVRs(SHR-2040/2041/2042) through a site, the sequence will operate as follows. - In Single Mode : DVR1:3CH. DVR1:4CH DVR2:1CH. DVR1:1CH - In Quad Mode : DVR1:1,2,3,4CH. DVR2:1,2,3,4CH . DVR3:1,2,3,4CH - In Nine-Split Mode : DVR1:1,2,3,4CH DVR2:1,2,3,4CH. DVR3:1,2,3,4CH - In Sixteen-Split Mode : DVR1:1,2,3,4CH DVR2:1,2,3,4CH DVR3:1,2,3,4CH
Monitoring screen condition Information / Selection Button - Displays the Split or Monitoring condition of the screen in play.

Page 9-16

: When monitoring with Quad Mode
: When monitoring with Single Mode

: Camera Off

The number in the screen icon indicates the screen position in SmartViewer. : The orange icon indicates the current channel is connected to a camera. : The gray icon indicates the current channel is connected to a camera but not displayed in the screen. : The black icon with a slash indicates the current channel is not connected to any camera.

Page 9-17

NEXT Button
Click the NEXT(Mouse Left Button) to see the channel next to the current channel. In Single Mode : 1 (CH) In Quad Mode : 1,2,3,4 1,2,3,4 (CH) In Nine-Split Mode : 1,2,3,4 1,2,3,4 (CH) In Sixteen-Split Mode : 1,2,3,4 1,2,3,4 (CH)
If you connected with multi-DVRs(SHR-2040/2041/2042) through a site, the sequence will operate as follows. - In Single Mode : DVR1:3CH. DVR1:4CH DVR2:1CH. DVR1:1CH - In Quad Mode : DVR1:1,2,3,4CH. DVR2:1,2,3,4CH . - In Nine-Split Mode : DVR1:1,2,3,4CH DVR2:1,2,3,4CH DVR3:1,2,3,4CH. - In Sixteen-Split Mode : DVR1:1,2,3,4CH DVR2:1,2,3,4CH DVR3:1,2,3,4CH.

CALLBACK Button

- If you press CALLBACK, the CALLBACK window will be activated to receive messages. - Receiving a message, Smart Viewer automatically tries to contact a DVR. - In the event of Video Loss, Alarm, or Motion Detection, a message is received.

Page 9-18

FAVORITE Button
- If you press FAVORITE, the FAVORITE window will be activated.
If you click the current FAVORITE, the cameras saved in the current setting value will be displayed in the screen. You may delete the selected FAVORITE or all FAVORITE setting values. You may set up a new FAVORITE number and name. Change FAVORITE at the set intervals.
- The FAVORITE button is available only when you contact SITE. - The FAVORITE information setting value is saved in the Config file even after you are away from the SITE. - If you change the DVR list composing the SITE from Setup, the FAVORITE setting value will be initialized

a If you click the current PRESET number and a
name, the camera will move to its position.
b b You can delete the selected or all the

PRESET setup values.

c c You can set a new PRESET number and
! The PRESET function is supported to all the cameras. You are allowed to set no more than 20 PRESET items. But, the AD Protocol camera can be set up to 7 PRESET items.
@ AUTOPAN : The camera operates reciprocating between Start and End. # SCAN : The camera operates circulating the PRESET setup positions. $ PATTERN : The camera operates following the route that user defined.
The name of @,#, and $ functions varies depending on the camera and some cameras do not support these functions. - The Samsung camera supports all the functions and names. - The Panasonic camera supports all the functions, but with different names. @ SEQUENCE # AUTOPAN $ SORT - The PELCO camera supports all the functions, but with different names. @ FRAME SCAN # AUTO SCAN $ PATTERN - Other cameras do not support the @AUTOPAN, #SCAN, and $PATTERN functions.

Page 9-22

Self Menu Setup of PTZ device
! You can set the function menu in the PTZ camera.
! This is a Menu screen supplied by the camera itself, seen from Viewer. @ Use the / / / button for the movement between menus. # This is a button for the role of Enter.
The Camera Menu Setup function is supported by Samsung and Panasonic camera only.
As far as SHR-2040/2041/2042 uses the PTZ camera control functions, Smart Viewer can not control PTZ Camera. The PTZ Camera control functions can be used by the user with Admin authority.

Page 9-23

Search Mode
The initial screen of search mode - The search mode is divided into the remote mode to search and play the SHR-2040/2041/2042 video and the local mode to play *.dvr file saved in the directory designated by your PC.
! To change to the search mode for the remote control of video recorded in SHR-2040/2041/2042. @ To show the playback video. # To change to the remote mode for the transmission of video recorded in SHR-2040/2041/2042 through network. $ To change to the local mode for the playback of *.dvr files recorded in your PC. % Calendar window to select Year/Month/Day for search. ^ To control the audio volume and video brightness/contrast. & To change the screen split. * Button for the Record / Convert File / Print / Setup functions. ( To control the playback of searched video. ) To display the next channel in order. 1 To change the channel and DVR or renew the calendar window and Time Line. 2 Timeline to display the time information of search date recorded in SHR-2040/2041/2042.
- When connecting to the site, select a DVR to search in the camera connection list. - When connecting as a user, you are denied to access the search mode.

Page 9-24

DVR(SHR-2040/2041/2042) Selection/Change by contacting SITE - Same as DVR(SHR-2040/2041/2042)/SITE Connection of the monitoring mode.

Page 9-27

$ Print - This function outputs the screen zone of the playback video which is now being displayed.
% Setup Mode Button - This button pops up the setup mode window.

Play Buttons

! Play : Play @ Reverse Play : Reverse Play # Stop : Stop $ Fast Forward : Faster Play % Fast Backward : Faster Reverse Play ^ Step Forward : Forward playback per second. & Step Backward : Reverse playback per second. * Go to First : Playback of the first image in the time Line ( Go to Last : Playback of the latest(last) image in the time Line

Page 9-28

During the play(Play/RevPlay/FF/FB), disconnection or change to the both monitoring mode and local mode is not permitted. Click the Stop button first before the change.
Time Line - Displays the time information of video in SHR-2040/2041/2042 selected on the calendar window. - The normal mode indicates the time information of 24 hours while the Extension mode indicates the time information every 2 hours.
[ Normal mode ] ! The channels being displayed in the playback screen will be activated in the white background. @ Time Line : The time information of video recorded in SHR-2040/2041/2042P. # Time Bar : Displays the current time of video being displayed in the playback screen.
Double click the area closed by the time bar to change to the zoom in mode. One column of time line represents an hour. Time Line turns Green(Normal), Red(Panic), Orange(Alarm), Blue(Motion), Yellow(Schedule), or Purple(Video Loss) depending on the recording condition.
[ Zoom In Mode ] ! Displays the time line one hour ago. @ Displays the time line one hour later.
Double click again the area closed by the time bar to change to the normal mode. One column of time line represents 5 minutes. Time Line turns Green(Normal), Red(Panic), Orange(Alarm), Blue(Motion), Yellow(Schedule), or Purple(Video Loss) depending on the recording condition.

Page 9-29

Next Button - Changes the channel as the Next button does in the monitoring mode.
During the video playback(Play/RevPlay/FF/FB), the channel change is not available.
Reload Button - Updates the record time information in the calendar window and time line.
Local Mode - Plays *.dvr file saved in the directory of your PC by the Record function. - You can search and play only one channel. - You are allowed to access it regardless of connecting with SHR-2040/2041/2042. - Other functions than the calendar display function are as same as those of the remote mode. - The time information of LocalFile will be displayed at the first channel position in the time line together with the file name. : Selects a file to be played in the file selection window and changes to the local mode.

Only the *.dvr file saved by the audio activation can be played in the local mode.

Page 9-30

Setup Mode

Initial Screen

! Button to select items for DVR Setup, Viewer Setup, Site Setup, and S/W Version setup. @ It shows what the selected Setup item can set up in detail. # button to terminate the setup window. $ Button to save the information revised in the setup window, remark the information prior to such a revision, or terminate the setup window.

Page 9-31

Setup Item Selection Button
- It is used for the selection of each setup item. - It is composed of 4 items- DVR Setup, Viewer Setup, Site Setup, and S/W Version. - DVR Setup: Allows you to change the remote menu setup items of SHR-2040/2041/2042. - Viewer Setup : Allows you to set the various kinds of item concerning the operation of Smart Viewer. - Site Setup : Allows you to set SHR-2040/2041/2042 information, that is SHR-2040/2041/2042 name, IP Address, ID, and Password that you are going to contact through Smart Viewer or registers all the registered SHR-2040/2041/2042s at a site for control. - S/W Version : Shows the current version of Smart Viewer, system requirement, and the System S/W version of on-line SHR-2040/2041/2042 and upgrades SHR-2040/2041/2042 System S/W remotely.
Save/Cancellation of Revised Information
- Click the [Apply] button to save the information revised in the setup window and click the [Cancel] button to display the information before such a revision.

Closing the setup window

- Click the [X] icon on the top of right corner in the setup window or click the [Close] button to close the setup window. - If more than one setup item have been revised before you close the setup window, the following message box pops up. If you press OK, the revised information will be saved, closing the setup window but if you press CANCEL, the revised information will be flown away, closing the Setup window.

Page 9-32

- If you select a DVR(SHR-2040/2041/2042) and press the [Edit] button, the following message box pops up and the DVR(SHR-2040/2041/2042) cannot be edited. To edit the DVR(SHR-2040/2041/2042), go to the DVR list.
To add a DVR(SHR-2040/2041/2042) to the site
- If you press the [Add] button, the DVR(SHR-2040/2041/2042) selected in the DVR list is added to the site selected in the site list. The DVR(SHR-2040/2041/2042) set to ADSL cannot be added to the site. - You can add up to 4 DVRs(SHR-2040/2041/2042) to a site and the DVR(SHR-2040/2041/2042) composing the site can be deleted in the site list. - If you press the [Add] button unless a site is registered in the site list, a new site named Site [0] as a default is created and the DVR(SHR-2040/2041/2042) add to it. - When the site to add a DVR (SHR-2040/2041/2042) is connected with the Smart Viewer, the following message box pops up and the addition of DVR(SHR-2040/2041/2042) to the site is impossible. Be sure to cut the connection between the DVR(SHR-2040/2041/2042) and the Smart Viewer before you add a DVR(SHR-2040/2041/2042).

Page 9-57

S/W Version
- If you press the [S/W Version] button, the smart viewer version, system requirements, and the version of DVR(SHR-2040/2041/2042) System S/W, being connected to the smart viewer, are displayed. - You can upgrade the on-line DVR(SHR-2040/2041/2042) System S/W remotely. You are authorized with S/W upgrade in an Admin authority only. With the authority of user or without connecting with the DVR(SHR-2040/2041/2042), your access will be denied.
! Displays the smart viewer version and system requirements. @ Displays the version and name of DVR if any DVR(SHR-2040/2041/2042) is being connected with the smart viewer. You are also able to upgrade remotely the on-line DVR(SHR-2040/2041/2042) S/W.

Page 9-58

Smart Viewer Version
- Smart Viewer Version and system requirements are displayed.

DVR Version

SHR-2040/2041/2042
- DVR Version not only displays the connected DVR(SHR-2040/2041/2042) name if any DVR(SHR-2040/2041/2042) is being connected with Smart Viewer or the name of DVR(SHR-2040/2041/2042) composing a site if any DVR(SHR-2040/2041/2042) is being connected with the site but also displays DVR(SHR-2040/2041/2042) S/W version. - When the smart viewer does not connected with the DVR(SHR-2040/2041/2042), it displayed with a gray and Not connected is displayed in the status. - Each DVR Version has a check box, which is used for S/W Upgrade.
DVR(SHR-2040/2041/2042) S/W Upgrade - Smart Viewer upgrades on-line DVR(SHR-2040/2041/2042) S/W remotely. ! Select a DVR(SHR-2040/2041/2042) to be upgraded among DVRs(SHR-2040/2041/2042) on line.

Page 9-59