Instructions

Use this camera in the following order. Setting up the application software To use this camera with a PC, install the application software rst. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. (p.84) Take a picture. (p.20)
Getting to Know your camera
Thank you for buying a Samsung Digital Camera. Prior to using this camera, please read the user manual thoroughly. If you require After Sales service, please bring the camera and the cause of the camera malfunction (such as battery, Memory card etc.) to the A/S centre. Please check that the camera is operating properly prior to when you intend to use it (e.g. for a trip or an important event) to avoid disappointment. Samsung takes no responsibility for any loss or damage that may result from camera malfunction. Keep this manual in a safe place. If you use a card reader to copy the images on the memory card to your PC, the images could be damaged. When transferring the images taken with the camera to your PC, be sure to use the supplied USB cable to connect the camera to your PC. Please note that the manufacturer holds no responsibility for loss or damage of images on the memory card due to the use of a card reader. The contents and illustrations of this manual are subject to change without prior notice for upgrading the camera functions. Microsoft, Windows and Windows logo are registered trademarks of Microsoft Corporation incorporated in the United States and/or other countries. Adobe and Reader are either trademarks or registered trademarks in the United States and/or other countries. All brand and product names appearing in this manual are registered trademarks of their respective companies.

Take a picture

Insert the USB cable
Insert the supplied USB cable into the PCs USB port and the cameras USB connection terminal. (p.86) Check the cameras power. If the power is turned off, preset the camera button to turn it on.

Check the camera's power

Check [Removable Disk]
Open Windowss EXPLORER and search for [Removable Disk]. (p.87)

Danger

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Do not attempt to modify this camera in any way. To do so may result in re, injury, electric shock or severe damage to you or your camera. internal inspection, maintenance and repairs should only be carried out by your dealer or Samsung Camera Service centre. Please do not use this product in close proximity to ammable or explosive gases, as this could increase the risk of explosion. Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the camera, and then disconnect the power source. You must contact your dealer or Samsung Camera Service centre. Do not continue to use the camera as this may cause a re or electric shock. Do not insert or drop metallic or inammable foreign objects into the camera through access points e.g. the memory card slot and battery chamber. This may cause a re or electric shock. Do not operate this camera with wet hands. This could pose a risk of electric shock.

Warning

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Do not use the ash in close proximity to people or animals. Positioning the ash too close to your subjects eyes may cause eyesight damage. For safety reasons keep this product and accessories out of reach of children or animals to prevent accidents e.g.: - Swallowing battery or small camera accessories. If an accident should occur, please consult a doctor immediately. - There is the possibility of injury from the cameras moving parts. Battery and camera may become hot during prolonged use and it may result in camera malfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow it time to cool. Do not leave this camera in places subject to extremely high temperatures, such as a sealed vehicle, direct sunlight or other places of extremes in temperature. Exposure to extreme temperatures may adversely affect the cameras internal components and could cause a re. When in use, do not cover the camera or Charger. This may cause heat to build up and distort the camera body or cause a re. Always use the camera and its accessories in a well-ventilated area.

Caution

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. Leaking, overheating, or damaged battery could result in re or injury. - Use battery with the correct specication for the camera. - Do not short circuit, heat or dispose of battery in re. - Do not insert the battery with the polarities reversed. Remove the battery when not planning to use the camera for a long period of time. Otherwise the battery may leak corrosive electrolyte and permanently damage the cameras components. Do not re the ash while it is in contact with hands or objects. Do not touch the ash after using it continuously. It may cause burns. Do not move the camera while it is switched on, if you are using the AC adapter. After use, always switch off the camera before unplugging the cable from the wall socket. Then make sure that any connector cords or cables to other devices are disconnected before moving the camera. Failure to do so may damage the cords or cables and cause a re or electric shock. Take care not to touch the lens or lens cover to avoid taking an unclear image and possibly causing camera malfunction. Avoid obstructing the lens or the ash when you capture an image. When using this camera in low temperatures, you may experience the following. These are not camera malfunctions and usually recover at normal temperature. - It takes longer to turn on the LCD monitor and the colour may differ from the subject. - When changing the composition, there may be an after image on the LCD monitor. Credit cards may be demagnetized if left near case. Avoid leaving magnetic strip cards near the case. Never connect the 20 pin connector to the USB port of a PC. This carries a high risk of computer malfunction.

Contents

READY 007 System chart

015 017

Package Contents Sold Separately Identication of features Front & Top Back Bottom 5 Function button Self-timer lamp Camera Status Lamp Mode icon Connecting to a Power Source Inserting the memory card Instructions on how to use the memory card When using the camera for the rst time
RECORDING 018 LCD monitor indicator

022 023

How to use the menu Starting the recording mode Selecting modes How to use the Auto mode How to use the Program mode How to use the DIS mode Using the Photo Help Guide mode How to use the Scene modes 3
4 How to use the Movie clip mode Recording the movie clip without sound Pausing while recording a movie clip (Successive Recording) Things to Watch Out for When Taking Pictures Using the camera buttons to set the camera POWER button SHUTTER button ZOOM button Info (DISP) / Up button Macro / Down button Focus lock Flash / Left button Self-timer / Right button MENU button OK button Functions How to Enable Functions Using the MENU Button Exposure compensation White balance ISO Face Detection Face Tone 045 Face Retouch Image Size Quality / Frame rate Metering Drive mode Auto Focus type Photo Style Selector Image Adjust Voice Memo Voice Recording Recording the movie clip without voice

SETUP 046 Sound menu

047 048
Sound Volume Start up sound Shutter sound Beep Sound AF sound Self Portrait Setup menu Display Language Function Description Start up image
Display Bright Quick view Display SAVE Settings Formatting a memory Initialisation Setting up the Date / Time / Date type Time Zone File name Imprinting the recording date Auto power off Selecting Video out type Auto Focus lamp Setting the USB Play & Pause / OK button Left / Right / Down / MENU button Delete button Setting up the play back function using the LCD monitor Edit Resize Rotating an image Photo Style Selector Image Adjust Starting the Multi Slide Show Start the Multi Slide Show Selecting Images Congure Multi Slide Show effects Setting play interval Setting Background Music File Options Deleting images Protecting images Voice memo DPOF Copy To Card PictBridge PictBridge : Picture Selection PictBridge : Print Setting 5
PLAY 054 Starting play mode
Playing back a still image Playing back a movie clip Movie clip capture function Playing back a recorded voice Playing back a voice memo LCD monitor Indicator Using the camera buttons to set the camera Thumbnail / Enlargement button Info (DISP) / Up button

ICON MODE ICON MODE ICON Dawn Backlight Firework Beach&Snow Landscape Close up Text Sunset
When ash battery is charging The lamp blinks When the USB cable is inserted to a PC When the USB cable is inserted into a printer
Transmitting Data with a PC The lamp blinks (LCD monitor turns off) The lamp is off
When the printer is printing The lamp is off When the AF activates The lamp turns on (The camera focus on the subject) The lamp blinks (The camera doesnt focus on the subject)
Connecting to a Power Source
You should use the rechargeable battery SLB-10A supplied with the camera. Be sure to charge the battery before using the camera. SLB-10A rechargeable battery Specication
Model Type Capacity Voltage Charging time SLB-10A Lithium lon 1050mAh 3.7V Approximately 180 Minutes
Important information about battery usage. When camera is not in use, turn off the power. Please remove the battery if the camera will not be used for long periods. Batteries can lose power over time and are prone to leaking if kept inside the camera. Low temperatures (below 0C) can affect the performance of the battery and you may experience reduced battery life. Batteries will usually recover at normal temperatures. During extended use of the camera, the camera body may become warm. This is perfectly normal.
Number of images and battery life: Using the SLB-10A
Battery life / Number of images Conditions
Using the fully charged battery, Auto mode, 10M image size, Fine image quality, Shot to shot interval: 30Sec. Approx. 140 MIN / Changing the zoom position between Still image Approx. 280 shots the Wide and the Tele after every shot. Using the ash on every second shot. Using the camera for 5 minutes and then powering it off for 1 minute. Movie Using the fully charged battery Approx. 120 MIN 640x480 image size 30fps frame rate
You can charge the rechargeable battery (SLB-10A) by using the SAC-47 KIT which consists of the AC adapter (SAC-47) and the USB cable (SUC-C3). When the SAC-47 and SUC-C3 are combined, they can be used as an AC cable. - Using an AC cable : Connect the AC adapter to the USB cable. It can be used as a power cable.

There are 4 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator Battery status
The battery is fully charged Low battery Low battery Battery empty. capacity capacity (Recharge (Prepare to (Prepare to or use spare recharge or use recharge or use battery) spare battery) spare battery)
When using the camera and the battery in a place that is excessively cold or hot,
the battery status on the LCD may be different from the actual battery status.
Instructions on how to use the memory card
Be sure to format the memory card (see p.49) if you are using a newly purchased memory card for the rst time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory cards performance. Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty. The memory card is an electronic precision device. Do not bend, drop or subject the memory card to any heavy impact. Do not store the memory card in an environment with strong electronic or magnetic elds, e.g. near loud speakers or TV receivers. Please do not use or store in an environment where there are extremes in temperature. Do not allow the memory card to become dirty or to come into contact with any liquid. Should this happen, clean the memory card with a soft cloth. Please keep the memory card in its case when not in use. During and after periods of extended use, you may notice that the memory card is warm. This is perfectly normal. Do not use a memory card that is used in another digital camera. To use the memory card in this camera, format the memory card using this camera. Do not use a memory card formatted by another digital camera or memory card reader. If the memory card is subjected to any of the following, the recorded data may become corrupted : - When the memory card is used incorrectly. - If the power is switched off or the memory card is removed while recording, deleting (formatting) or reading. Samsung cannot be held responsible for lost data. It is advisable to copy important data onto other media as back-up e.g. oppy disks, hard disks, CD etc. If there is insufcient memory available : A [Memory Full] message will appear and the camera will not operate. To optimise the amount of memory in the camera, replace the memory card or delete unnecessary images stored on the memory card. Don't remove the memory card when the camera status lamp is

Photo Help Guide Photo Help Guide Features to use when the image is out of focus Features to reduce camera shake Features to use in low light conditions Features to use when adjusting brightness Features to use when adjusting colours
Photo Help Guide Features to use when the image is out of focus

Photo Help Guide

Pressing the Left/Right button Pressing the OK button
Half-press the shutter button to focus To focus on a subject 80 cm or farther To focus on a subject less than 80 cm away To focus on peoples faces
To focus on your subject, halfpress the shutter button: - Green frame: subject is in focus - Red frame: subject is out of focus

Practice

Pressing the Up button Pressing the Up/Down button
When the subject is in focus, press the shutter button completely to capture the image or video. If the subject is out of focus, try half-pressing the shutter button again. 2/2
Pressing the shutter button

Guide list

Press the shutter button to practice using this feature. Guide list

Pressing the OK button

[Function that can be used when focusing is difcult]
How to use the Scene modes ( )
The scene modes are listed below. [Beauty Shot] ( ) : Take a photo of a person with options to hide facial imperfections. ) : Use this for shooting still images at night or in other dark conditions. ) : To take a picture of a person. ) : To take a picture of fast moving objects, for example, children. ) : To take pictures of distant scenery. ) : Close-up shooting for small objects such as plants and insects. ) : Use this mode to shoot a document. ) : For taking pictures of sunsets. ) : Daybreak scenes. ) : Portrait without shadows caused by backlight. ) : Firework scenes. ) : For ocean, lake, beach and snowscape scenes.
Use the menu to easily congure optimal settings for a variety of shooting situations. 1. Select the Scene mode by pressing the MENU button (p.20). 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the shutter button to capture an image.

[Night]

[Portrait] [Children]

[Landscape] [Close Up]

[Text] [Sunset] [Dawn] [Backlight]

( ( ( (

[Firework]

[Beach&Snow] (

How to use the Movie clip mode ( )
A movie clip can be recorded for as long as the available recording time of the memory capacity allows. 1. Select the Movie clip mode by pressing the MENU button. (The Movie clip mode icon and available recording time will display on the LCD monitor.). 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the shutter button once and movie clips are recorded for as long as the available recording time allows. Movie clips will still be recorded if the shutter button is released. If you wish to stop recording, press the shutter button again. Image size and type are listed below. - Image size : 640x480, 320x240 (Selectable) - Movie clip le type : AVI (MJPEG) - Frame Rate : 30 FPS, 15 FPS (Selectable) 6. Select the [Voice] menu by pressing the Up / Down button and press the OK button. 7. Select the [Off] menu by pressing the Left / Right button. 8. Press the OK button. You can record a movie without sound. See p.45 for further details.

Flash off

( o : Selectable)

Self-timer (

) / Right button
Available ash mode, by recording mode

o o o o o o

When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-timer ( ) button. This function is used when the photographer would also like to be in the image.

Mode o

If you operate the Self-timer button during the self-timer operation, the self-timer function is cancelled. Use a tripod to prevent the camera from shaking. In Movie Clip mode, only the 10SEC self-timer will work.

o o o o

Motion Timer
Motion Pressing the Shuter button after setting the Motion Timer Detecting the subject's movement No movement is detected Icon & Self-timer lamp Blink (1 second interval) Blink (0.25 second interval) Turn on and the image is taken after 2 seconds
Selecting the self-timer 1. Select a Recording mode with the exception of Voice recording mode. (p.20) 2. Press the SELF-TIMER / RIGHT ( ) button until the desired mode indicator displays on the LCD monitor. A 10 second, 2 second, Double self-timer or Motion timer icon appears on the LCD monitor. 3. When you press the SHUTTER button, the picture will be taken after the specied time has elapsed.
[Selecting the 10 SEC self-timer]
The Motion Timer ows are as followings. (Movie Clip mode excluded) Selecting the Motion Timer Pressing the Shutter button Conrming the composition (Within 6 sec.)*1 Starting the detection (Swing your hands fully)*2 Stopping the detection (Do not move) Taking an image (after 2 sec.)
*1: The camera detects the subject's movement 6 seconds after pressing the Shtter button, so conrm the composition within 6 seconds. *2: Move your body or hands fully.
Self-timer mode indecator
Icon Mode Description 10SEC Pressing the shutter button will allow an interval self-timer of 10 seconds before the image is taken. 2SEC Pressing the shutter button will allow an interval self-timer of 2 seconds before the image is taken. A picture will be taken after about 10 seconds and 2 seconds later a second picture will be Double taken. When using the ash, the 2-second self-timer self-timer may be delayed for longer than 2 seconds depending on the ash charging time. The camera detects the subject's movement 6 Motion seconds after pressing the Shutter button, and the Timer picture is taken when the movement is stopped.

The higher the resolution, the lower the number of shots
available because high resolution images require more memory.

Quality / Frame rate

Metering
If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. [Multi] ( ) : Exposure will be calculated based on an average of the available light in the image area. However, the Set the light metering option. Metering calculation will be biased towards the centre of the Back Move image area. This is suitable for general use. [Spot] ( ) : Only the rectangular area in the centre of the LCD monitor will be metered for light. This is suitable when the subject in the centre is exposed correctly, regardless of the back lighting. [Center Weighted] ( ) : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for taking a picture of small object like a ower or insects.
You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality.
Mode Icon Sub menu Super Fine File Format jpeg Fine jpeg Normal jpeg 30 FPS avi 15 FPS avi STILL IMAGE mode MOVIE CLIP mode
Adjust the image quality. Quality
Frame Rate Set the number of frames per second for movies.
This le format complies with the DCF (Design rule for Camera JPEG (Joint Photographic Experts Group) :
File system). JPEG is the image compression standard developed by the Joint Photographic Experts Group. This type of compression is most commonly used for compressing photos and graphics because it can compress the les efciently.
If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, it is better to use exposure compensation.

Drive mode

Auto Focus type
You can select your preferred Focus Area according to the shooting conditions.

Style mode Normal Soft Vivid Forest Retro Cool Calm Classic Negative Custom RGB Icon Description No style effect is applied. Soft style is applied. Vivid style is applied. Forest style is applied. Sepia style is applied. Cool style is applied. Calm style is applied. Black & white effect is applied. Negative effect is applied. Dene an RGB tone to create your own photo style.

Back Move

Image Adjust
Saturation You can change the saturation of the image. 1. Select [Saturation] by pressing the Up/Down button. 2. Change the saturation by pressing the Left/Right button. 3. Press the Shutter button to take an image.
Adjust contrast, sharpness and saturation. Image Adjust Contrast Sharpness Saturation
Contrast You can change the contrast of the image. 1. Select [Contrast] by pressing the Up/Down button. 2. Change the contrast by pressing the Left/Right button. 3. Press the Shutter button to take an image.
Sharpness You can adjust the sharpness of the picture you are about to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory.
1. Select [Sharpness] by pressing the Up/Down button. 2. Change the Sharpness by pressing the Left/Right button. 3. Press the Shutter button to take an image.

Voice Memo

Voice Recording
A voice can be recorded for as long as the available recording time (Max. 10 hour) allows.
You can add your voice-over to a stored still image. (Max. 10 sec.)
Set the voice memo feature. Memo
Enable voice recording. Record
- If the voice memo indicator is displayed on the LCD monitor, the setting is completed. - Press the shutter button and take a picture. The picture is stored on the memory card. - Voice memo will be recorded for ten seconds from the moment the picture is stored. In the middle of the sound recording, pressing the shutter button will stop the voice memo.
Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recording time (max:10 hour) allows. The recording time will be displayed on the LCD monitor. Voice will still be recorded if the shutter button is released. - If you wish to stop recording, press the shutter button again. - File type : *.wav

Record

[Voice recording mode]
Recording the movie clip without voice
You can record the movie without voice. Select [Off] of [Voice] menu in the Movie clip mode. ( ) icon will appear on the LCD monitor. Press the Shutter button and a movie will record for as long as the memory capacity allows without voice.
Pausing while recording a voice Using this function, you can record your favourite voice clips into a voice recording le without having to create multiple voice recording les.

Movie clip capture function
You can capture still images from the movie clip. How to capture the movie clip 1. Press the OK button while playing the movie clip. Then press the Down button. 2. The paused movie clip is saved in a new file name.
Playing back a recorded voice
1. Select the recorded voice that you want to play back by using the Left/Right button. 2. Press the OK button to play back a recorded voice file. - To pause a recorded voice file, while Play playing it back, press the OK button again. - To resume playback of the voice file, press the OK button. - To rewind the voice file while it is playing, press the Left button. To fast forward the voice file, press the Right button. - To stop playback of the voice memo, press the Down button.
The captured movie clip file is the same size as the original movie clip (640x480, 320x240). When you press the down button at the beginning of the movie clip, the first frame of the movie clip will be saved as a still image.

[Paused]

Playing back a voice memo

[Press the down button]

1. Select a still image that has the voice memo. 2. Press the OK button to play back the voice memo. - To pause the voice memo, while playing it back, press the OK button again. - To resume playback of the voice memo, press the OK button.

LCD monitor Indicator

The LCD monitor displays shooting information about the displayed image.
In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions.
Thumbnail ( ) / Enlargement ( ) button
You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. Thumbnail display 1. While an image is displayed on full screen, press the thumbnail button. 2. The thumbnail display will highlight the image that had been showing at the time the thumbnail mode was selected. 3. Press the 5 function button to move to a desired image. 4. To view an image separately, press the enlargement button.
Pressing the thumbnail button ( ) Pressing the enlargement button ( ) Highlighted image

Select Move

No. 13
Description Playback mode Voice Memo DPOF Protect Folder name & File name Memory card indicator Battery ISO Aperture value Shutter speed Flash Image size Recording date
Page p.54 p.68 p.69 p.68 p.50 p.14 p.37 p.30 p.39 p.50

100-0010

80~1600 F3.2 ~ F15.~ 1/1,500 On/Off 3648x2736 ~ 320x240 2008/12/01

[Highlighted image]

[ Thumbnail display mode ]
Image enlargement 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the thumbnail button will zoom back to the original full sized image. - You can tell whether the image displayed is an enlarged view by Trim checking the image enlargement indicator shown at the top left of the LCD monitor. (If the image is not an enlarged view, the indicator will not be displayed.) You can also check the area of enlargement. - Movie clips and WAV files cant be enlarged. - If an image is enlarged, a loss of quality may occur. The maximum enlargement rate in proportion to the image size

Normal Wide Tele 80cm ~ Infinity Macro 10cm ~ 80cm 50cm ~ 80cm Auto Macro 10cm ~ Infinity 50cm ~ Infinity
- Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off, Red Eye Fix - Range : Wide : 0.2m ~ 3.75m, Tele : 0.5m ~ 2.0m - Recharging Time : Approx. 4 sec - Soft+, Soft, Normal, Vivid, Vivid+ - Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom

Sharpness White Balance

LCD Monitor Focusing
Voice Recording - Voice Recording (max. 10 hours) - Voice Memo in Still Image (max. 10 sec.) Date Imprinting Shooting - Date, Date & Time, Off (user selectable) - Still Image Mode : Auto, Program, DIS, Photo Help Guide, Scene Scene : Beauty Shot, Night, Portrait, Children, Landscape, Close-up, Text, Sunset, Dawn, Backlight, Firework, Beach & Snow Shooting : Single, Continuous, Motion Capture, AEB Self-timer : 10 sec., 2 sec., Double, Motion Timer

Shutter Exposure

- Auto : 1/8 ~ 1/1,500 sec., Program : 1 ~ 1/1,500 sec., Night : 8 ~ 1/1,500 sec., Firework : 4 sec. - Control : Program AE - Metering : Multi, Spot, Center-Weighted, Face Detection AE - Compensation : 2EV (1/3EV steps) - ISO : Auto, 80, 100, 200, 400, 800, 1600
- Movie Clip With Audio or without Audio (user selectable, recording time : max 2 hours) Size : 640x480, 320x240 Frame rate : 30 fps, 15 fps 3X Optical Zoom and Mute in Zooming Movie Editing (Embedded): Pause during recording, Still Image Capture Storage - Media Internal memory : About 9MB flash memory External Memory (Optional) : MMC card (Up to 1GB guaranteed) SD card (Up to 2GB guaranteed) SDHC card (Up to 8GB guaranteed) - File Format Still Image : JPEG (DCF), EXIF 2.21, DPOF 1.1, PictBridge 1.0 Movie Clip : AVI (MJPEG) Audio : WAV - Image Size - Capacity (1GB Size)
Super Fine About 280 About 282 About 340 About 339 About 495 About 783 About 2284 Fine About 383 About 421 About 483 About 490 About 683 About 975 About 2376
Normal About 550 About 586 About 693 About 696 About 921 About 1292 About 2907
These figures are measured under Samsung standard conditions and may vary depending on shooting conditions and camera settings. Effect - Effect : Photo Style Selector, Image Adjust (Sharpness, Contrast, Saturation) - Editing : Resize, Rotate, Photo Style Selector, Image Adjust (Face Retouch, Red Eye Fix, Brightness, Contrast, Saturation) - Type : Single image, Thumbnails, Multi slide show, Movie Clip Multi slide show : Slide show with Effect & Music - Digital output connector : USB 2.0 - Audio : Mono - Video output : NTSC, PAL (user selectable) - DC power input connector : 4.2 V

Image Play

Interface

3648X 2736

3648X 2432

3648X 2052

We recommend that you should copy the images to the PC to
5. Click a folder where you want to paste the file.
view them. Opening images directly from the removable disk may be subject to unexpected disconnection. When you upload a file that is not taken by this camera to the Removable Disk, the [File Error] message will be displayed on the LCD monitor in the PLAY mode, and nothing is displayed in THUMBNAIL mode.
6. Press the right mouse button and a pop-up menu will open. Click [Paste].
7. An image file is transferred from the camera to your PC.
Removing the removable disk
Windows 2000/XP/Vista (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Double-click the [Unplug or Eject Hardware] icon on the task bar.

[Double-click!]

5. A [Safe to Remove Hardware] window will open. Click the [OK] button. 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely.

7. Unplug the USB cable.

3. The [Unplug or Eject Hardware] window will open. Select the [USB Mass Storage Device] and click the [Stop] button.
4. The [Stop a Hardware device] window will open. Select the [USB Mass Storage Device] and click the [OK] button.

Samsung Master

You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. To start the program, click [Start Programs Samsung Samsung Master]. Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will be displayed after connecting the camera to your PC. - To download the captured images, select the [Select All] button. - Select desired folder in the window and click the [Select All] button. You can save captured images and selected folder. - If you click the [Cancel] button, downloading will be cancelled. 4. Select a destination and make a folder to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded. - Folder name will be made as you want and images will be downloaded. - After selecting a folder that was made before, images will be downloaded. 5. Click [Next >] button. 6. A window will open as shown alongside. The destination of the selected folder will be displayed on the upper side of the window. Click the [Start] button to download the images.
3. Click [Next >] button.
7. Downloaded images will be displayed.
Image viewer : You can view the stored images. Image edit : You can edit the still image.
- Image viewer functions are listed below. Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. Image selection window : You can select the desired images in this window. Media type selection menu : You can select image viewer, image edit and movie edit functions in this menu. Preview window : You can preview an image or a movie clip and check the multi media information. Zoom bar : You can change preview size. Folder display window : You can see the folder location of the selected image. Image display window : Images of the selected folder are displayed. Refer to the [Help] menu in Samsung Master for further information.

Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. Connect the supplied USB cable. The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. There is an unexpected error during file transfer. Turn the camera power off and on again. Transfer the file again. When using the USB hub. There may be a problem in connecting the camera to the PC through the USB hub if the PC and the hub are not compatible. Wherever possible, connect the camera to the PC directly. Are other USB cables connected to the PC? The camera may malfunction when it is connected to the PC at the same time as another USB cable. In this case, disconnect the other USB cable, and connect only one USB cable to the camera. Case 6 When I open the Device Manager (by clicking Start (Settings) Control Panel (Performance and Maintenance) System (Hardware) Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. Right-click on the entry with the question (?) or exclamation (!) mark and select "Remove". Restart the PC and connect the camera again. In some security programs (Norton Anti Virus, V3, etc.), the computer may not recognise the camera as a removable disk. Stop the security programs and connect the camera to the computer. Refer to the security program instructions about how to temporarily disable the program. The camera is connected to the USB port located on the front of the computer. When the camera is connected to the USB port located on the front of the computer, the computer may not recognise the camera. Connect the camera to the USB port located on the back of the computer.

Case 2

Case 7

Case 3

Case 4

This document is created with trial version of HTML2PDF Pilot 2.16.100.

About US

Shipping

Payment

Policy

Contact US

Shop By Categories 6
Canon charger Casio charger JVC charger Nikon charger Olympus charger Samsung charger Sony charger Sanyo charger
Chargers > Samsung Battery Charger > Samsung SLB-10A Charger

C ateg o ri es

Canon Battery chargers Casio Battery chargers JVC Battery chargers Panasonic Battery charger Sharp Battery chargers Olympus Battery chargers
S am su n g S L B -10A C h arg er,R ep l acem en t fo r S am su n g S L B -10A B attery C h arg er
Samsung SLB-10A Charger can work with Samsung SLB-10A battey part number, and Samsung L100, Samsung PL50 camcorder models, and so on. Our Samsung SLB-10A Charger is the same quality as the OEM Samsung battery Charger, and it is more cheaper.

P ro m o ti n s o

Casio NP-20 Charger Charger for Casio NP-20 Battery JVC BN-VF808 Charger Charger for JVC BN-VF808 Battery Canon NB-2L Charger Charger for Canon NB-2L Battery Olympus LI-40B Charger Charger for Olympus LI-40B Battery
Vol e: tag 110V A C (I p u t),12V-1A n 12V (O u tp u t) Multi-charger for Samsung
SLB-10A battery, You Could use both in car and at home, Enjoy to your digital life. $27. 31 List Price:$27.

Nikon Battery chargers

Y o u r P ri : $19. ce 12
Fujifilm Battery chargers Kodak Battery chargers Samsung Battery chargers Sanyo Battery chargers Sony Battery chargers Canon Camcorder charger Casio Camera charger JVC Camcorder charger Panasonic Camcorder charger Sharp Camcorder charger Olympus Camera charger Nikon Camera charger Fujifilm Camera charger Kodak Camcorder charger Samsung Camcorder charger Sanyo Camera charger Sony Camcorder charger Canon Camera charger JVC Camera charger Panasonic Camera charger Kodak Camera charger Samsung Camera charger Sony Camera charger Charger for Samsung SLB-10A Battery Click to enlarge Guarantee: 100% Brand New, Full 1 Year Warranty, Fast Delivery!
Nikon EN-EL5 Charger Charger for Nikon EN-EL5 Battery Sharp BT-L11 Charger
S a m su n g S L B -10A C h a rg e r C h a ra cte r:
Item Number: Input: Output: Dimension: Weight: Type: W B C S M 014S U 110V A C 12V -1A 106. 50x69. 00x37. 00m m 368. 55g S am sung B attery chargers
Charger for Sharp BT-L11 Battery Canon BP-511 Charger Charger for Canon BP-511 Battery Canon NB-4L Charger Charger for Canon NB-4L Battery
F" F it to ch a rg e r S a m su n g B a tte ry N u m b e rs:(P re ss "C trl+ F " to fin d yo u r se a rch ) "C
Samsung SLB-10A Samsung SAC-47
Canon NB-5L Charger Charger for Canon NB-5L Battery Sanyo DB-L20 Charger Charger for Sanyo DB-L20 Battery Sony NP-BG1 Charger Charger For Sony NP-BG1 Battery
F it to ch a rg e r S a m su n g C a m e ra m o d e ls:(P re ss "C trl+ F " to fin d yo u r se a rch ) "C F"
Samsung ES50 Samsung HZ10W Samsung L100 Samsung L210 Samsung M110 Samsung P1000 Samsung PL51 Samsung PL65 Samsung SL202 Samsung SL620 Samsung TL9 Samsung ES55 Samsung HZ15W Samsung L110 Samsung L310W Samsung M310W Samsung P800 Samsung PL55 Samsung PL70 Samsung SL420 Samsung SL720 Samsung WB500 Samsung HMX-U10 Samsung IT100 Samsung L200 Samsung M100 Samsung NV9 Samsung PL50 Samsung PL60 Samsung SL102 Samsung SL502 Samsung SL820 Samsung WB550

G o o g l S earch e

W h e n yo u u se S a m su n g S L B -10A ch a rg e r, p le a se n o tice th e fo llo w in g d e ta ils:

1. Please ensure Samsung SLB-10A charger that you are going to buy fits the brand, model and part number of your device; 2. Package includes High Performance Turbo Charger, AC Power Adapter and 12.00V Car Cord; 3. Turbo Charger must be used with our AC Adapter or our Car Cord; 4. Designed to charge batteries quickly and safely; 5. Convenient LEDs indicate the charging status; 6. Samsung SLB-10A Battery charger is 100% Compatible with OEM Sharp SAC-47 charger part numbers; 7. If your SLB-10A Samsung charger has any problem, please contact our customer service.

Search

Di sco u n ts
i 30% off O nlne C harger S tore

D iscla im e r:

All our chargers and other products which supplied by our product manufacturers are replacement, we indicated this point on each page of our website's titles. Our Company and this Website are neither affiliated with, authorized by, licensed by, distributors for, nor related
This document is created with any way version of HTML2PDF Pilot 2.16.100. through our web site in trial to these manufacturers, nor are the products offered for sale
manufactured by or sold with the authorization of the manufacturers with which our products. We mainly supply replacement for Famous brand batteries, if we violate your trademark rights, please tell us, we will delete them as soon as possible.

Share |

Copyright 2012 w w w.my-chargers.com All Rights Reserved. Global Batteries Store