Digital Still Camera

10 Mega-pixel 3x Optical Zoom Lens 2.5 LCD Screen Digital Image Stabilization Face Detection MPEG Movie Recording 2x AA Alkaline Batteries Colors: Onyx Black, Neutral Silver, Fancy Purple, Arty Red
All features, specifications, and model numbers subject to change. All on screen images are simulated pictures.

CAMERA FEATURES

10.2 mega -pixel 3x optical zoom 2.5 Intelligent LCD Display Digital Image Stabilization. The effects of image blur are reduced in lower light conditions. VGA@30fps Movie Recording: MJPEG format Self Portrait lets you know when youre in the picture with a beep. Face Detection feature detects up to nine different faces. Automatically adjusts focus and brightness, this feature also senses and removes red-eye. Beauty Shot Red-eye Fix algorithm automatically eliminates red-eye from your pictures. Photo Help Guide Step-by-step troubleshooting instructions are provided through the LCD for your convenience Photo Style Selector lets you select from a wide variety of advanced photo effects then previews a suite of images to show the results before you shoot. White balance modes: Auto, Daylight, Cloudy, Tungsten, Fluorescent_H, Fluorescent_L, Custom Scene modes: Beauty shot, portrait, night scene, children, landscape, text, close-up, sunset, dawn. Multi Slide Show function lets you arrange pictures into a slide show, add music and active slide effects to bring out the emotion in your photos. Movie recording: 2 hours maximum Voice recording; 10 hours maximum

SPECIFICATIONS

Lens: Samsung lens Focal length: 6.3 ~ 18.9mm Power: AA Alkaline battery (2) Storage: Internal: about 11MB flash memory External: SD/SDHC/MMC+ external memory cards File formats: Still: JPEG, EXIF 2.21, DPOF 1.1, PictBridge 1.0. Movie: AVI (MJPEG) Audio: WAV Images sizes: 10M (3648x2736), 7M (3072X2304), 5M (2592x1944), 3M (2048x1536), 1M (1024x768), 9MP (3648x2432), 7MW (3648x2056) Voice recording: Mono
NET DIMENSIONS & WEIGHT (WXHXD)
Dimensions: 3.70 x 2.47 x 0.99 Weight: 0.26 lbs. (without battery and card)
SHIPPING INFORMATION (WXHXD)
Dimensions: TBD Weight: TBD

ORDER CODE

TBD - Onyx Black TBD - Neutral Silver TBD - Fancy Purple TBD- Arty Red

CONNECTIVITY

OS: XP/Vista Mac OS 10.3 or greater PC connection: USB 2.0
Design and specifications are subject to change without notice. Non-metric weights and measurements are approximate. 2009 Samsung Electronics America, Inc. All rights reserved Samsung is a registered trademark of Samsung Electronics Co., Ltd. All product and brand names are trademarks or registered trademarks of their respective companies. 209-SS Printed in USA.

SYSTEM REQUIREMENTS

Windows: Windows 2000/XP/Vista, PC with processor better than Pentium III 500MHz (800MHz recommended), 250MB available hard disk space (over 1GB recommended), minimum 256MB RAM (over 512 MB recommended), USB port, CD-ROM drive, 1024x768 pixels 16-bit color display monitor (24-bit color display recommended), Microsoft DirectX 9.0 or later Macintosh: Power Mac G3 or later, Mac OS 10.3 or later, minimum 256MB RAM, 110MB of available hard-disk space, USB port, CD-ROM drive.
Samsung Electronics America, Inc. 105 Challenger Road | Ridgeeld Park, NJ 07660-0511 Tel (201) 229-4000 | 1-800-SAMSUNG | www.samsung.com

Part Number:

[] Insert the battery as shown - If the camera does not turn on after you have inserted battery, please check whether the battery (+ / -). - When the battery chamber cover is opened, do not force the battery chamber cover, this may damage it.
Insertingthe rnernor_ card
[] insert the memory card as shown. - Turn off the camera's power before inserting the memory card. - Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera (LCD monitor). - Do not insert the memory card the wrong way round. Doing so may damage the memory card slot.
[] There are 4 indicators for battery condition that are displayed on the LCD monitor.
(Recharge use spare or battery,)
_e_battery Battery empty. _e_batte_
capacity capacity The battery is (Prepareto (Prepare to fully charged rechargeor use rechargeor use... spare battery) spare battery)
._ When using the camera and the battery in a place that is excessively cold or hot, the battery' status on the LCD may be different from the actual battery' status.
instructions on how to use the rnernorv card
Be sure to format the memory card (see p.48) if you are using a newly purchased memory card for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory card's performance. Should this be the case, you witl need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty. The memory card is an electronic precision device. Do not bend, drop or subject the memory card to any heavy impact. Do not store the memory card in an environment with strong electronic or magnetic fields, e.g. near loud speakers or TV receivers. Please do not use or store in an environment where there are extremes in temperature. Do not allow the memory card to become dirty or to come into contact with any liquid. Should this happen, clean the memory card with a soft cloth. Please keep the memory card in its case when not in use. During and after periods of extended use, you may notice that the memory card is warm. This is perfectly normal. Do not use a memory card that is used in another digital camera. To use the memory card in this camera, format the memory card using this camera. Do not use a memory card formatted by another digital camera or memory card reader. If the memory card is subjected to any of the following, the recorded data may become corrupted : - When the memory card is used incorrectly. - If the power is switched off or the memory card is removed while recording, deleting (formatting) or reading. Samsung cannot be held responsible for lost data. It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard disks, CD etc. If there is insufficient memory available : A [Memory Full] message will appear and the camera will not operate. To optimise the amount of memory in the camera, replace the memory card or delete unnecessary images stored on the memory card.

[] How to use the MENU button 1. Press the MENU button and a menu will be displayed. 2. Press the Up / Down button to select the [Mode] menu and press the Right button. 3. Select a desired mode by pressing the Up / Down button and then press the OK button. 3. 4. 5. 6. 7.
memory, you do not need to insert the memory card. If the memory card is not inserted, an image will be stored in the internal memory. If the memory card is inserted, an image will be stored on the memory card. Close the battery chamber cover. Press the power button to turn on the camera. Select the Auto mode by pressing the MENU button. Point the camera towards the subject and compose the image by using the LCD monitor. Press the shutter button to capture an image.
o f the auto focus frame turns to red when you press the shutter button down half way, it means that the camera cannot focus on the subject. Should this be the case, the camera is unable to capture an image clearly. Avoid obstructing the lens or the flash when you capture an image.
Howto usethe Pro ram mode o-. How to use the DIS mode
Digital Image Stabitisation (DIS) mode. This mode will reduce the effect of camera shake and help you get a well-exposed image in dim conditions. 1. Select the DIS mode by pressing the MENU button. (p.19) 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the Shutter button to capture an image.
Selecting the automatic mode will configure the camera with optimal settings. You can still manually configure all functions except the aperture value and shutter speed. 1. Select the Program mode by pressing the MENU button (p.19). 2. Press the Menu button to configure advanced functions.
[] Things to watch out for using the DIS mode [] The submenus for the functions are as follows: 1. The digital zoom wilt not operate in the DIS mode. 2. If the lighting condition is brighter than fluorescent lighting conditions, the DIS will not activate. 3. If the lighting condition is darker than in fluorescent lighting conditions, camera shake warning indicator ( "_k_ ) will display. _ For best results only take pictures in situations where the camera shake warning indicator ( _ ) is not displayed. 4. If the subject is moving, the captured image may be blurred. 5. As the DIS uses the camera's digital signal processor, it may take a little longer for the camera to process and save the images.

Quick view

If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. - Sub menus [Off] : The quick view function can't be activated.
You can select the image that is first displayed on the LCD monitor whenever the camera is turned on. - Sub menus : [Off]*, [Logo], [User Image] - Use a saved image for the start-up image with the [Start Image] in the [RESIZE] menu in the play mode. - The start-up image will not be deleted by [Delete] or [Format] menu. - The User images will be deleted by [Reset] menu.
[0.5 sec]*, [1 sec], [3 sec] : The captured image is briefly displayed during the selected time.
You can adjust the LCD brightness. - Sub menus : [Auto]*, [Dark], [Normal], [Bright] If you set the [Power Save] to On and the camera isn't operated during the specified time, the LCD monitor will be turned off automatically. - Sub menus [Off]* : The LCD monitor will not be turned off. [On] : If the camera isn't operated during the specified time (about 30 SEC.), the camera power wilt be idle (Camera status tamp: Blinking) automatically.
You can't set the [Power Save] menu of Playback Mode. 47

Formattin_

This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. - Sub menus [Yes] : Awindow for confirming the selection displays. Select the [Yes] menu. A [Formatting] message appears and the memory will be formatted. If you run FORMAT in Play mode, a [Format is completed] message will appear. [No]* : The memory wilt not be formatted. [] Be sure to run [Format] on the following types of memory card. - A new memory card, or an unformatted memory card - A memory card that has a file this camera can't recognise or one that has been taken from another camera. - Always format the memory card using this camera. If you insert a memory card that has been formatted using other cameras, memory card readers, or PCs, you will get a [Card Error] message.

Initialisation

All camera menu and function settings will be restored to their default values. However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be changed. - Sub menus [Yes] : Awindow to confirm the selection will be displayed. Select the [Yes] menu and all settings will be restored to their defaults. [No]* : Settings will not be restored to their defaults.

the Date / Time / Date

You can change the date and time that wilt be displayed on the captured images and set up the date type. Setting [Time Zone] enables you to display the local date and time on the LCD monitor when travelling overseas. - Date type : [yyyy/mm/dd], [mm/dd/yyyy], [dd/mm/yyyy], [Off]*

File name

This function allows the user to select the file naming format. [Reset] : After using the reset function, the next file name will be set from 0001 even after formatting, deleting all or inserting a new memory card. [Series]* : New files are named using numbers that follow the previous sequence, even when a new memory card is used, or after formatting, or after deleting all pictures.

Time Zone

[] Available cities: London, Cape Verde, Mid-Atlantic, Buenos Aires, Newfoundland, Caracas, La Paz, NewYork, Miami, Chicago, Dallas, Denver, Phoenix, LA, San Francisco, Alaska, Honolulu, Hawaii, Samoa, Midway, Wellington, Auckland, Okhotsk, Guam, Sydney, Darwin Adelaide, Seoul, Tokyo, Beijing, Hong Kong, Bankok, Jakarta, Yangon, Almaty, Kathmandu, Mumbai, New Delhi, Tashkent, Kabul, Abu Dhabi, Teheran, Moscow, Athens, Hetsinki, Rome, Paris, Berlin DST : Daylight Saving Time
- The first stored folder name is 100SSCAM, and the first file name is SDCl0001. - File names are assigned sequentially from SDCl0001 SDCl0002 -+ ~ -e SDC19999. -+
- The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM -e 101SSCAM -e ~ -e 999SSCAM. - Maximum numbers of files in a folder are 9999. - The files used with the memory card conform to the DCF (Design rule for Camera File systems) format. If you change the image file name, the image may not play back.

recordingdate

Auto power off
This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. - Sub menus [Off] : The power off function wilt not operate. [1 rain], [3 rain]*, [5 min], [10 min] :The power will turn off automatically if not used for the period of time specified. - After replacing the battery, the power off setting will be preserved. - Note that the automatic power off function will not operate if the camera is in the PC / Printer mode, slide show, playing back a voice recording and playing back a movie clip.
There is an option to include DATE /TIME on still images. - Sub menus [Off]* :The DATE & TIME will not be imprinted on the image file. [Date] : Only the DATE will be imprinted on the image file. [Date & Time] :The DATE & TIME wilt be imprinted on the image file.
The Date & Time are imprinted at the bottom right side of the still image. The imprint function is applied only to still images. Depending on the manufacturer and print mode, the date printed on an image may not be printed correctly.

Starting.!_l_a,y mode

Turn the camera on and select Play mode by pressing the play mode button ( r_ ). The camera can now play back the images stored in the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory.
Pia_zi_q back a movie clip
1. Select the recorded movie clip that you want to play back by using the Left/Right button. 2. Press the OK button to play back a movie clip fib. - To pause a movie clip file while playing it back, press the OK button again. - Pressing the OK button again will cause the movie clip file to restart. - To rewind the movie clip while it is playing, press the Left button. To fast forward the movie clip, press the Right button.

back a still imaqe

1. Select the PLAY mode by pressing the play mode button ( _ ).
2. The last image stored on the memory is displayed on the LCD monitor.
- To stop playback of the movie clip, press the OK button, and then press the Left or Right button.
3. Select an image that you want to view by pressing the Left/Right button. Press and hold the Left or Right button to play back the images quickly.

Starting.play mode

Movieclip_ture function _q back a recorded voice
You can capture still images from the movie clip. [] How to capture the movie clip 1. Press the OK button while playing the movie clip. Then press the Down button. 2. The paused movie clip is saved in a new file name. The captured movie clip file is the same size as the original movie clip (640x480, 320x240). When you press the down button at the beginning of the movie clip, the first frame of the movie clip wilt be saved as a still image.

[Paused]

1. Select the recorded voice that you want to play back by using the Left/Right button. 2. Press the OK button to play back a recorded voice file. - To pause a recorded voice file, while playing it back, press the OK button again. - To resume playback of the voice file, press the OK button. - To rewind the voice file while it is playing, press the Left button. To fast forward the voice file, press the Right button. - To stop playback of the voice memo, press the Down button.

[Press the down button]

Starting_play mode

_ci back a voice memo

The LCD monitor displays shooting information about the displayed image.
1. Select a still image that has the voice memo. 2. Press the OK button to play back the voice memo. - To pause the voice memo, while playing it back, press the OK button again. - To resume playback of the voice memo, press the OK button.

Ima_ust

[] Brightness control 1. Press the play back button and press the MENU button. 2. Click the Up/Down button from the Edit menu to select [Image Adjust] ( [B]] ) menu tab and press the OK button. [] Red eye Removal Red eye effect can be removed from the captured image. 1. Select ( _ ) by pressing button and press the OK 2. The [Making New Image] displayed and the image new file name. the Left/Right button. message is is saved as a You can change the brightness of the image. 1. Select ( [0[" ) by pressing the Left/Right button and press the OK button. Then a bar for selecting the brightness wilt be displayed. 2. Change the brightness by pressing the Left/Right button. 3. Press the OK button and the image will be saved as a new file name.
Starting the Multi Slide Show ( _
Images can be displayed continuously
[] Contrast control You can change the contrast of the image. 1. Select ( @ ) by pressing the Left/Right button and press the OK button. Then a bar for selecting the contrast will be displayed. 2. Change the contrast by pressing the Left/Right button. 3. Press the OK button and the image will be saved as a new file name.

at pre-set intervals.

You can view the Multi Slide Show by connecting the camera to an external monitor. 1. Press the ptay mode button and press the menu button. 2. Press the Up / Down button and select the [Multi Slide Show] menu tab and press the OK button.
Start the Multi Slide Show
The Multi Slide Show can start only in the [Start] menu. 1. Use the Up / Down buttons to select the [Start] menu and press the Right button. 2. Select a desired sub menu by pressing the Up / Down button. [Play] : The Multi Slide Show is closed after one cycle. [Repeat] : The Slide show is repeated until cancelled. 3. Press the OK button and the slideshow will be started. - To pause the slide shown while playing it back, press the OK button again. - Pressing the OK button again wilt cause the Multi Slide Show restart. - To stop playback of the Multi Slide Show, press the OK button, and then press the Left or Right button.
[] Saturation control You can change the saturation of the image. 1. Select ( e_ ) by pressing the Left/Right button and press the OK button. Then a bar for selecting the saturation will be displayed. 2. Change the saturation by pressing the Left/Right button. 3. Press the OK button and the image will be saved as a new file name.
Starting the Multi Slide Show
Selectinc_ ec!es Confiqure Multi Slide show effects

Unique screen effects can be used for the Multi Slide Show. 1. Select the [Effect] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down button to select the type of effect. 3. Press the OK button to confirm the setting.
You can select image to view 1. Use the Up / Down buttons to select the [images] menu and press the Right button. 2. Select a desired sub menu by pressing the Up / Down button. [Att] : All images saved in the Memory are played back. Press the OK button to save the configuration. [Date] : images taken in a specified date are played back. Press the OK button to save the configuration. [Select] : Play only the selected images, if you press the Right button, you can select the desired images to play back. The selected image can be saved as [Select1], [Select2] and [Select3]. If you save the selected image with the [New Select] command, it will be saved as [Select1]. But when a new image is saved again using [New Select], the former image which had been saved as [Select1] will be saved as [Select2] automatically. You can change and cancel the images which were saved as [Select1], [Select2] and [Select3]. Press the Fn button to save the configuration. 3. Select [Play] or [Repeat] in the [Start] menu to start the multi slide show.
Starting the Multi Slide Show _)

Setting._alav interval

Set the Multi Slide Show play interval. 1. Select the [Interval] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down buttons to select the desired interval. 3. Press the OK button to save the configuration. 1. Press the play mode button and press the menu button. 2. Press the Up / Down button and select the [File Options] menu tab and press the OK button.

DeletincLLm&aes e

This deletes images stored on the memory. 1. Press the Up / Down button and select the [Delete] menu tab. And then press the Right button. 2. Select a desiredsub menu by pressingthe UP / DOWN button and press the OK button. [Select] : Selection window for an image to delete is displayed. - Up/Down/Left/Right : Select an image - OK button : Select the image for deletion. (._/mark) - Fn Button : Press the Fn button to display the confirmation message. Select the [Yes]menu and press the OK button to delete marked images. [All] : Displays confirmation window. Select the [Yes] menu and press the OK button to delete all unprotected images, tf there aren't protected images, all the images are deleted and a [No Image File] message will appear. 3. After deletion, the screen will be changed to the play mode screen.

The loading time depends on the image size and quality. While the Multi Slide Show is playing, only the first frame of a MOVIE file is displayed. While the Multi Slide Show is playing, the voice recording file will not display. The interval menu functions in the [Of_ menu only.

_qround

Set the Multi Slide Show music. 1. Select the [Music] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down buttons to select the desired Music. 3. Press the OK button to save the configuration.
[All] : Protect / release all saved images o f all the files stored in the memory card, the unprotected files in the DClM subfolder wilt be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files on the memory card. - If you protect an image, the protect icon will be displayed on the LCD monitor. (An unprotected image has no indicator) -An image in LOCK mode will be protected from the delete function or [Delete] functions, but wilt NOT be protected from the [Format] function.

Protectinqim_ ecLes

This is used to protect specific shots from being accidentally erased (Lock). tt also unprotects images that have been previously protected (Unlock). 1. Press the Up / Down button and select the [Protect] menu tab. And then press the Right button. 2. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. [Select ] : Selection window for an image to be protected / released is displayed. - Up / Down / Left / Right : Select an image - OK button : Protect / release the image - Fn button : Your changes wilt be saved and the menu wilt disappear.

Voice memo

You can add your voice to a stored still image.

[Voice memo menu]

[Ready for recording]

[Voice is recording]

- Press the shutter button to take a picture. The images are saved on the memory. After saving the image, the voice wilt record for 10 seconds. - To stop the recording, press the shutter button.
[] DPOF(Digital Print Order Format) allows you to embed printing information on your memory card's MlSC folder. Select the pictures to be printed and how many prints to make. [] The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs. [] This function is not available for Movie clips and Voice recording files. [] When the wide angle image is printed as a wide angle print, 8% of the left and right side of the image may not be printed. Check that your printer can support the wide angle image when you print the image. When you print the image at a photo lab, request that the image is printed as a wide angle image. (Some photo labs may not support the wide angle size print.) 3. Select a desired sub menu by pressing the Up / Down button and press the OK button. [Select] : Selection window for an image to print is displayed. - Up / Down / Left / Right : Select an image to print. - Zoom button : Select the number of prints. [All] : Configure number of prints for all pictures except movie and voice files. - Up / Down button : Select a number of prints [Reset] : Cancel the print setup. 4. Press the OK button to confirm the setting. If an image carries DPOF instructions, the DPOF indicator () ) will show. [] Standard This function allows you to embed printing quantity information on a stored image. 1. Press the Up / Down button and select the [DPOF] menu tab. And then press the Right button. 2. Press the Right button again and [Standard] sub menu will display.

Warning indicator

There are several warnings that may appear on the LCD display. [File Error] oFile error -e. Delete the file. oMemory card error -+ Contact a camera service centre. [Low Battery] oThere is low battery capacity -+ Insert fresh batteries.
[Card Error] Memory card error -e. Turn off the camera power and turn it on again -e. Insert the memory card again -+ Insert and format the memory card (p.48) [Card Locked] oThe memory card is locked -+ SD/SDHC memory card : Slide the write protect switch to the top of the memory card [Memory Full]
The memory card or internal memory is full. -e. Insert new memory card. -+ Delete the unnecessary image flies [No Image File] oThere are no images stored on the memory -e. Take images -+ Insert a memory card that is holding some images
Before contacting a service centre
Please check the following The camera doesn't switch on oThere is low battery capacity -e Insert fresh batteries. (p.13) Battery is inserted incorrectly with the polarities reversed. -+ Insert the battery according to the polarity marks (+, -). The camera power ceases while in use eThe battery is exhausted --,'. Insert fresh batteries. oThe Camera is turned off automatically -e. Turn on the camera power again. oOperation has ceased in a low temperature outside of the camera usage temperature range. -+ Make the camera and battery warm by placing them in your pocket, etc. and then immediately before shooting, place the battery in the camera and then shoot. Camera does not take imaaes when Dressin_ the Shutter button oThere is insufficient memory capacity -e Delete unnecessary image files oThe memory card has not been formatted -e Format the memory card (p.48) oThe memory card is exhausted -e Insert a new memory card oThe memory card is locked -.-.', Refer to [Card Locked] error message oThe camera's power is off -e Turn the camera power on oThe battery is exhausted -+ Insert fresh batteries (p.13) Battery is inserted incorrectly with the polarities reversed. -+ Insert the battery according to the polarity marks (+, -) The camera suddenly stops workin_while in use oThe camera stopped due to a malfunction -+ Remove/re-insert battery and switch the camera on The imaaes are unclear oA picture was taken of the subject without setting an appropriate macro mode -e Select an appropriate macro mode to take a clear image. oTaking a picture beyond the flash range -e Take a picture within the flash range oThe lens is smudged or dirty -+ Clean the tens
Before contactinq a service centre
The flash does not fire oFlash off mode has been selected -e. Dis-engage flash off mode oThe camera mode can't use the flash -+ Refer to the FLASH instruction (p.29) Incorrect date and time is disc)laved The date and time have been set incorrectly or the camera has adopted the default settings -+Reset the date and time correctly The camera buttons do not o#erate Camera malfunction -+ Remove/re-insert battery and switch the camera on No imaue on external monitor The external monitor has not been connected properly with the camera -e Check the connection cables oThere are incorrect files in the memory card -+ Insert a memory card that has correct files When usina the PC's explorer, the [Removable Disk[file does not show oCable connection is incorrect -e Check the connection oThe camera is off -+ Turn the camera on The operating system is not Windows 2000, XP, Vista / Mac OS 10.3. Alternatively the PC does not support USB -+ Instalt Windows 2000, XP, Vista / Mac OS 10.3 to PC that supports USB A part of the LCD screen does not occasionally turn on or a spot appears. oAIthough the LCD screen is manufactured The imaues don't ulav back Incorrect file name (Violation of DCF format) -+ Do not change the image file name Colour of imaae is different to the oriqinal scene oWhite balance or effect setting is incorrect -+ Select appropriate White balance and effect Imaaes are too bricLhtht Exposure is excessive -4, Reset exposure compensation 78 red, white and blue spots appear. This phenomenon does not affect the quality of the recorded image and it is not a malfunction. A vertical line appears on the LCD screen when taking a picture of a olf a subject is exposing bright lights, a gray, black, red or purple vertical line may appear. This is a phenomenon called smear and it does not affect the quality of the recorded image. This is not a malfunction. with high precision lighted or the technology, the precision pixels are not occasionally

SuperFine About183About200About252About252About334About495&bout1238 Fine About 34 About 62 About 42 About About 78 About 14 &bout 1673
Normal About472About511About613About619About793About1067 bout1876 &

Image Play

Power Source - Primary Battery : 2x AA Alkaline - Rechargeable battery : SNB-2512B KIT (Optional) (2xAA Ni-MH Battery & Charger) Included battery may vary depending on sales region. Dimensions (WxHxD) - 94.1 x 62.7 x 25.2mm (excluding protrusions) -Approx. - 0 ~ 40C - 5 ~ 85% - Samsung Master, Adobe Reader 120g (without batteries and card)
Weight Operating Temperature Operating Humidity Software
._ Specifications are subject to change without prior notice._ Alt trademarks are the property of their respective owners.

Software Notes

Please ensure that you read the instruction manual carefully before use. -Under no circumstances should all or part of either the software or the user manua! be reproduced. -Copyrights for software are licensed only for use with a camera. -In the unlikely event of a manufacturing fault, we wilt repair or exchange your camera. We cannot, however, be held responsible in any way for damage caused by inappropriate use. -Using a Hand-made PC or a PC and OS that has not been guaranteed by the manufacturer is not covered by the Samsung warranty. -Before reading this manual, you should have a basic knowledge of computers and O/S (Operating Systems).

_SystemRequirements

Mac OS 10.3 or later Minimum 256MB RAM (Penfium III800MHz recommended (Over 512MB recommended Windows 2000 / XP / Vista 110MB of available hard disk Minimum 256MB RAM (Over 512MB recommended) space 250MB of available hard disk space (Over 1GB recommend) 1024x768 pixels,16bitcolor displaycompatible monitor (24bitcolordisplayrecommended) Microsoft DirectX9.0C or later It is not compatible with Windows XP and Vista 64-bit Edition. Samsung is not responsible for any defects or damages caused by the use of unauthorized computer including an assembled PC.
PC with processor better than Pentium tll 500MHz

Power Mac G3 or later

About the software
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. o ou should allow 5 ~ 10 seconds for running the automatic setup program according to the capability of your computer. If the frame does not appear, run the [Windows Explorer] and select [Installer.exe] in the CD-ROM Drive root directory.
[] Samsung Master : This is the all-in-one multi media software solution. You can download, view, edit and save your digital images and movie clips with this software. This software is only compatible with Windows.

Settin_lication

software
2. Instalt DirectX, Samsung Master by selecting a button shown on the monitor. If a recent version of DirectX has been installed on your computer, DirectX may not be installed.
To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. You can visit the Samsung web-site through the internet.

http://www.samsung.com

1. The auto run frame will display. Click the [Samsung Digital Camera Installer] menu in the Auto run frame.
Settin_Lu_ tpthe a_pplicationsoftware
3. After restarting the computer, connect the PC to the camera with the USB cable.
4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer wilt recognise the camera.

;:; ;1% i ;,1 ;! _tz.

t N If your OS is Windows open. XP/Vista, an image viewer program will

Startinq PC mode

If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". In this mode, you can download stored images to your PC through the USB cable.
PDF documents ofwith this camera. includedthe the Software CD-ROM supplied user manual are Search in PDF files with Windows explorer. Before opening the PDF files, you must install the Adobe Reader included in the Software CD-ROM. Install Adobe Reader from the CD provided. If the Internet is not enabled, install Adobe Reader by using the executable file located in the CD. To install the Adobe Reader 6.0.1 correctly, tnternet Explorer 5.01 or later has to be installed. Visit "www.microsoft.com" and upgrade the Internet Explorer.
[] Camera settings for connection 1. Turn on the camera. 2. Connect the camera and computer with the supplied USB cable. 3. Once the camera is turned on, the camera automatically recognizes the computer and is connected to it. If automatic connection fails, set the [USB] menu to [Computer]. (p.52)

Starting PC mode

[] Connecting the camera to a PC [] Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk -e DCIM-e 100SSCAM].The image files wilt then be displayed.
[] Disconnecting the camera and PC Refer to page 89 (Removing the removable disk).
3. Select an image and press the right mouse button.
4. A pop-up menu will open. Click the [Cut] or [Copy] menu. - [Cut] : cuts a selected file. - [Copy] : copies files. - By using [Samsung Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files.

- Image edit functions are listed below. (_ Edit menu : You can select the following menus. [Tools] : You can resize or crop the selected image. See the [Help] menu. [Adjust] : You can modify image quality. See the [Help] menu. [Retouch]: You can change image or insert effects on the image. See the [Help] menu. % Drawing tools : Tools for editing an image. _' Image display window : A selected image displays in this window. ;#_' Preview window : You can preview the changed image. A still image edited with Samsung Master can't be played back on the camera. Refer to the [Help] menu in Samsung Master for further information. 91
[] Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. Some movie clips that were compressed with a codec that is not compatible with the Samsung Master can't play back in the Samsung Master. Refer to the [Help] menu in Samsung Master for further information.
- Movie clip edit functions are listed below. (_; Edit menu : You can select the following menus. [Add Media] : You can add other media elements to a movie. [Edit Clip] [Effects] [Set Text] [Narrate] [Produce] : You and : You : You : You : You can change the brightness, contrast, colour saturation. can insert an effect. can insert texts. can insert a narration. can save the edited multi media as a new file
name. You can select AVI, Windows media (wmv) and Windows media (asf) file types. 't2> Frame display window : You can insert multi media in this window.
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 10.3. 3. Connect the camera to the Macintosh and turn the camera power
Usina the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory wilt be displayed. 2. Select an image file and copy or move it to MAC.
4. A new icon will be displayed on the desktop after connecting the camera to the MAC.
First complete uploading from computer to camera and then remove the removable disk with the Extract command.
Please chock the following if the USB connection malfunctions. USB cable is not connected or it is not the supplied USB cable. Connect the supplied USB cable. When I open the Device Manager (by clicking Start (Settings) Control Panel (Performance and Maintenance) _ System _ (Hardware) _ Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. -->, Right-click on the entry with the question (?) or exclamation (!) mark and select "Remove". Restart the PC and connect the camera again.