OLSON & IVES

www.olsonives.com
For those who would rather have a technician install their store logo in their receipt printer, we offer our Logo Install Service. With LIS, an OLSON & IVES technician will remotely access your PC and complete the steps below just as if we were standing next to your PC. All we require is that your logo is installed in a file on your PC and that the PC has internet access. Fees for this service are $40 for one receipt printer, $25 for each additional printer (same session). Call 800-205-0650 to make an appointment.
Installing and Printing Store Logo with Samsung Receipt Printer
These instructions are to install a store logo on the Samsung SRP-350 receipt printers.
1. Save your store logo to a file on the computer. A. Click on Start>All Programs>Accesssories>Paint. B. Click on File>Open and select and open your logo file. C. Click on File>Save As and in the File name field give the file a new name. D. Underneath in the Save as type field select Monochrome bitmap. Click Save and then close Paint. 2. Determine which port your receipt printer is installed on. A. Click on Start>Printers and Faxes. You may need to click on Start>Control Panel>Printers and Faxes. B. Right click on the Receipt Printer icon and select Properties. C. Click on the Port tab and make a note which port is selected. Example: USB002, LPT1. 3. Download the Samsung logo utility from OLSON & IVES and save it to the desktop. A. Double-click on the utility from the desktop and then select Extract All. B. When the wizard opens, select Next. C. Select the destination , then click Next. D. Select Finish and a new window will open. E. Double Click on NV Image Tool and hit Run. 4. Open the desired image. A. From the program select the Open File button. B. Click on the desired file and click the open button. i. Your logo file name will now appear in the upper left side of the utility. 5. Select the correct printer interface. A. Click on the Port Setting button. B. Select SRP-350 for the printer model and select the correct printer interface. C. Click OK. i. The printer must be connected and on at this time. 6. Install the logo image in the printers onboard memory. A. Ensure the file is highlighted in the upper left hand side of the utility. i. The logo should appear in the main window. B. Click on the Download button. C. Click on the Download Start button. i. The printer will take a few seconds and then should beep. D. Click OK when download completes and then click Cancel. 7. Set-up CashMate to print the logo on your receipts: A. Open CashMate. B. Click Tools>Options>Register Settings and select the Receipt tab. C. Check the Enabled box for the logo and select the desired size. D. Click on the Test button above to print a sample receipt. If the logo is too big or too small, resize.
Call OLSON & IVES for further assistance, 800-205-0650