Reviews & Opinions
Independent and trusted. Read before buy Samsung SV-651GX!

Samsung SV-651GX

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Samsung SV-651GX Dvd Recorder, size: 546 KB
Related manuals
Samsung SV-651GX Introduction

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

About Samsung SV-651GX
Here you can find all about Samsung SV-651GX like manual and other informations. For example: review.

Samsung SV-651GX manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Samsung SV-651GX please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Samsung SV-651GX photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 9. Page 1 of 1. Average Rating:
gerrygriffin 3:49pm on Monday, November 1st, 2010 
Great piece of kit Works out of the box. Given our PC a new lease of life. Not more to say really! Insufficient Packaging/Protection During Delivery - But Good Product I bought this drive last week and it arrived yesterday. The product is fine. Samsung F3 HD103SJ Hard Drive Excellent performance at a good price. Very quiet drive, and much speedier than the original.
charveys 7:15am on Wednesday, September 29th, 2010 
i wish Newegg sold 16MB cache drives in IDE still (at time of purchase. Works quite well in the Toshiba Satellite S135 none Fast ; Lots of storage space None
masterjo 5:27am on Sunday, August 15th, 2010 
Inexpensive it ran fast, quiet, and cool inside a freenas server for about 6 months then a few clicking noises and that was it.
sheph 6:15pm on Friday, July 23rd, 2010 
Excellent drive! Have been using this as a backup drive for about 2 months. Fast.
melvynadam 3:02am on Saturday, June 19th, 2010 
Crashed 4 times during the one year warranty. Fast (before it crashes) Prone to failure....S.M.A.R.T. errors each time
ctorrez 11:12am on Tuesday, May 4th, 2010 
Good value for money, quick and quiet in operation, it works for me! None really Cheap had to be replaced twice Installed on PC running XP Pro as additional storage editing and playback of video and picture files. Easy to install and does the job well. None
spat61 9:37pm on Saturday, April 17th, 2010 
very quite in use good read&seek performance staight forward installation none found
alexiuk 2:15pm on Sunday, March 28th, 2010 
What a shame - I have over a dozen Samsung drives in service and 2/3 of these failed. The runaround from Samsung is the most disappointing aspect.
ernestop74 10:52pm on Friday, March 12th, 2010 
Great drive for PS3 Does what it says on the tin. Swapped HD in my PS3, I now have 465GB instead of 37GB. Very nice.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

STANDBY/ON EJECT

PLAY II PROG STOP

VIDEO L AUDIO R

I I P/S
AUX VIDEO INPUT AUX AUDIO L, R SOCKET INPUT SOCKETS
PROGRAMME SELECTION BUTTONS

RECORD BUTTON

REW BUTTON

(SV-451GX/ SV-251GX)

(SV-651GX)
EJECT BUTTON STANDBY/ON BUTTON VIDEO CASSETTE COMPARTMENT PAUSE/STILL BUTTON REW BUTTON F.F BUTTON
AUX VIDEO INPUT AUX AUDIO L, R INPUT SOCKETS SOCKET

PLAY BUTTON STOP BUTTON

Page 8

Infrared Remote Control

(SV-657GX/SV-655GX)
VCR STANDBY/ON TV STANDBY/ON

Display Indicator

TV STANDBY/ON BUTTON

VCR STANDBY/ON BUTTON

SLOW BUTTON

SHUTTLE

SHUTTLE BUTTON

V-LOCK

V-LOCK BUTTON

CLR/RST F.ADV INDEX

CLEAR AND RESET BUTTON TV BUTTON VCR BUTTON VOLUME BUTTONS AUDIO MODE SELECTION BUTTON STOP BUTTON REWIND/REVERSE PICTURE SEARCH BUTTON
INDEX BUTTON FRAME ADVANCE BUTTON

STEREO

SELECT

INPUT REPEAT

TUNER, AV1, AV2, AUX SELECTION / REPEAT SELECTION BUTTON PROGRAMME SELECTION / TRACKING BUTTONS DISPLAY BUTTON PLAY/PAUSE/STILL BUTTON

AUDIO VOL PROG/TRK

DISP./
FAST-FORWARD/FORWARD SEARCH BUTTON MENU BUTTON
MENU SELECTION BUTTON MENU SELECTION DOWN BUTTON

SPEED DUB

MENU SELECTION UP BUTTON MENU SELECTION BUTTON OK BUTTON

TV/VCR TIMER

RECORDING SPEED SELECTION BUTTON AUDIO DUBBING BUTTON 5(SV-657GX ONLY)
TIMER/SHOWVIEW BUTTON TV/VCR SELECTION BUTTON
Cassette loaded indicator PLAY indicator Multi-function display Timer indicator VCR indicator STEREO indicator 5(SV-657GX/SV-655GX/SV-651GX ONLY) 7 Rec indicator
(SV-651GX/SV-455GX/SV-451GX/ SV-255GX/SV-251GX)

Accessories

EJECT BUTTON
STANDBY/ON BUTTON SLOW BUTTON
You have just purchased a SAMSUNG Video Cassette Recorder (VCR). Together with your VCR, you will find the following accessories in the box.
INDEX BUTTON FRAME ADVANCE BUTTON TUNER, AV1, AV2, AUX 5(SV-651GX) SELECTION / REPEAT SELECTION BUTTON PROGRAMME SELECTION BUTTON

Satellite Receiver or other Equipment
If you cannot find the pictures and sound, or there is interference from nearby channels, it may be necessary to change the setting of the VCR output channel (see Setting the VCR Output Channel on page 15 and Problems and Solutions on page 30p). When the picture and sound are perfectly clear, store this channel at the desired programme position on the television. Result: That programme is now reserved for use with your VCR.

01823H SV-657GX/EUR-GB2

4/19/02 5:01 PM

Page 14

Inserting Batteries in the Remote Control
You must insert or replace the batteries in the remote control when you: x Purchase the video cassette recorder x Find that the remote control is no longer working correctly
Setting the Date and Time
Your VCR contains a 24-hour clock and calendar used to: x Automatically stop programme recording x Preset your VCR to record a programme automatically You must set the date and time when: x You purchase the video cassette recorder
Setting the VCR Output Channel
Your VCR output channel may need to be changed if the pictures suffer from interference or if your TV cannot find the pictures. Also, you can change the VCR output channel to adjust the frequency in which information is displayed on the screen.
Selecting the RF OUT Sound Mode (B/G-D/K)
You can choose the sound mode (B/G or D/K) according to the TV set connected to your VCR.
1 Press MENU on the remote control.
Result: The programming menu is displayed.
1 Push the tab in the direction of the arrow to release
the battery compartment cover on the rear of the remote control.
x Do not forget to reset the timesummeryou when change clocks from winter to time

and vice versa.

2 Press the corresponding ", or , buttons to select the INSTALLATION option. 3 Press the OK button to select this option. Result: The INSTALLATION menu is displayed. 4 Press the corresponding " or buttons, until the TV SYSTEM option is selected. 5 Press the button to select G or K. 6 On completion, press MENU twice to exit the menu.

2 Press the corresponding ", or , buttons to select the INSTALLATION option. 3 Press the OK button to select this option. Result: The INSTALLATION menu is displayed. 4 Press the corresponding " or buttons, until the VCR OUTPUT CH option is selected. 5 Select the required output channel (CH21~CH69) by

pressing the or buttons.

2 Insert two AA, R6 or equivalent batteries, taking care
to respect the polarities: + on the battery with + on the remote control on the battery with on the remote control remote control and pushing it back into place.
3 Replace the cover by aligning it with the base of the
2 Press the corresponding ", or , buttons to select the CLOCK SET option. 3 Press the OK button to select this option. Result: The CLOCK SET menu is displayed. 4 Press or to select the hour, minutes, day,
month and year. The option selected flashes. Result:
Do not mix different battery types (manganese and alkaline for example).
6 On completion, press MENU twice to exit the menu.
Then tune your television again (see page 13).
5 Press the " or buttons to increase or decrease
the value. Result: The day of the week is displayed automatically. You can hold the " or buttons down to scroll more quickly through the values.
Presetting the Stations Automatically
Displaying/Hiding On-Screen Information
Your VCR displays most information both on the VCR and the television. You can choose to display or hide this information on the television screen (except for the Index, Programming MENU and Showview function 5(SV-657GX/SV-655GX/SV-455GX/SV-255GX only), which cannot be hidden).

Choosing Your Language

You can change the language in which information is displayed on the screen.
2 Press the corresponding ", or , buttons to select the LANGUAGE SET option. 3 Press the OK button to select this option. Result: The LANGUAGE SET menu is displayed. 4 Select the required language by pressing the

" or

You do not need to preset the stations if you have already set them automatically (see Plug & Auto Set Up on page 13). Your VCR contains a built-in tuner used to receive television broadcasts. You must preset the stations received through the tuner. This can be done: xPlug & Auto Set up (see page 13) xAutomatically xManually (see page 16) You can store up to 80 stations.
5 Press the " or buttons to select your country.
6 Press OK to start the auto scanning. Result: x The PLEASE WAIT indication flashes
on the television screen. The first frequency band is scanned and the first station found is displayed and stored. x The VCR then searches for the second station and so on. x When the automatic scanning procedure has finished, the VCR switches automatically to programme 1. The number of stations automatically stored by the VCR depends on the number of stations that it has found.

2 Press the corresponding ", or , buttons to select the USER SET option. 3 Press the OK button to select this option. Result: The USER SET menu is displayed. 4 Press the corresponding " or buttons, until the OSD option is selected. 5 To.
Display on-screen information Hide on-screen information Press or , until.
To enable the VCR to decode a scrambled TV station, the decoder must be activated after the scan (see pages 16).

buttons.

1 Press the MENU button on the remote control.
5 Press OK to store the language selected. 6 Press MENU to exit the menu.
Result: From now on, all the on-screen information will be displayed in the language selected.
2 Press the corresponding ", !or , buttons to select the INSTALLATION option. 3 Press the OK button to select this option. Result: The INSTALLATION menu is displayed. 4 Press the corresponding " or buttons, until the AUTO SET UP option is selected. And then press
the button to select this option.
7 If you wish to cancel the auto scanning before the end,
press the MENU button three times to exit the menu.
ON is displayed. OFF is displayed.
x Once the auto scanning procedure has finished, some stations may have been stored more than once; select the stations with the best reception and delete the ones no longer required (see page 16).

Page 16

Presetting the Stations Manually
Switching between the TV and VCR Modes
The TV/VCR button allows you to record one channel with the VCR while you watch another channel on the TV. When the VCR indicator is. On Your television. The television receives the picture from the VCR and you can select channels with the PROG/TRK (" or ) / PROG (" or ) buttons on the VCR or the remote control. The television receives the is picture from your home aerial or cable television system as it did before you connected the VCR. You can then use the programme (" or ) buttons on your television to select the channels.
Selecting the Cassette Type
You do not need to preset the stations manually if you have already set them automatically. To enable the VCR to decode a scrambled TV station, the decoder must be switched on.
11 Press the " or buttons until the NAME is selected. 12 To change the programmes name, press the !button.
Result: The first letter of the name flashes.
If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the type of cassette inserted.

13 To.

Select a character in the name Move to the next or previous character
Then. Press the " or button until the required character is displayed (letters, numbers or - character). Press the or buttons respectively. Then.
2 Press the corresponding ", !or , !buttons to select the INSTALLATION option. 3 Press the OK button to select this option. Result: The INSTALLATION menu is displayed. 4 Press the corresponding " or buttons, until the MANUAL SET UP option is selected. 5 Press the button to select MANUAL SET UP option. Result: The TV STATION TABLE menu is displayed. 6 Press the " or buttons to select a programme 7

2 Press the corresponding ", !or , buttons to select the USER SET option. 3 Press the OK button to select this option. 4 Press the corresponding " or buttons, until the TAPE SELECT option is selected. 5 Press the or buttons as many times as
required, until the correct cassette length is displayed. E180 E240 E 300 E260

14 If you.

Wish to store the station displayed
Press the corresponding " or !buttons, until the MFT is selected. Press the or buttons to adjust the picture, if necessary. Press OK to store the station. Press the corresponding " or !buttons, until the CH is selected. Press the or buttons to go on scanning the frequency band and display the next station Go back to the beginning of Step 14
Off (or the VCR turned off)
number as required. Press the !button to preset the station. Result: The MANUAL TUNING menu is displayed. Result: The frequency band is scanned and the first station found is displayed. If you know the number of the channel you want, press the numeric buttons on the remote control for example, for channel E21, first press 0 and then press 2, 1 (see page 31).
Do not wish to store the station displayed
6 Press MENU twice to exit the menu.
8 Press the or buttons to start scanning.
To switch the VCR indicator on and off, simply press the TV/VCR button.
15 Repeat this procedure from Step 6 onwards, until all
the required stations have been stored.
Selecting the Recording Speed 5(SV-657GX/SV-655GX/SV-651GX/ SV-455GX/SV-451GX Only)
You can record a cassette at two different speeds: x SP (Standard Play) x LP (Long Play) In Long Play modes: x Each cassette lasts twice as long x The recording is of a slightly lower quality To record a cassette. Press the SPEED button on the remote control, until.
NICAM 5(SV-657GX/SV-655GX/ SV-651GX Only)
NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound. Please refer to page 22.
9 Press the button, until the DECODER is selected. 10 Press the button to activate or deactivate use of

3 Insert the cassette on which the programme is to be
recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. Result: The VCR is switched on automatically.

4 Select:

The station to be recorded using the PROG/TRK (" or ) / PROG (" or ) buttons or x The AV1, AV2 or AUX 5(SV-657GX/SV-655GX/ SV-651GX only) source using the INPUT button for a satellite tuner or external video source Result: The channel number is displayed and the programme can be seen on the television.

5 Press the MENU button.

Result: The information concerning the programme is displayed. When using the ShowView function for the first time with stored stations, the programme number flashes. This one time, you must enter the station number manually by pressing the " or buttons. Refer to the following page if: x The programme number or times flash x You wish to modify the programme
The station to be recorded using the PROG/TRK (" or ) / PROG (" or ) buttons or The AV1, AV2 or AUX 5(SV-657GX/SV-655GX/ SV-651GX only) source using the INPUT button for a satellite tuner or external video source Result: The station number is displayed and the programme can be seen on the television.
5 With SV-657GX/SV-655GX/SV-651GX/SV-455GX/
SV-451GX, you can select the recording speed (SP/LP). Press the SPEED button.
6 If the programme and times are correct, press the

MENU button.

5 Hold the REC button down for a while to start
recording. Result: The record indicator appears on the television screen and VCR display. An index is recorded on the tape (see page 23).
5 Hold REC down for a while to start recording.
Result: The record indicator appears on the television and VCR display. An index is recorded on the tape (see page 23).
6 Press the REC button several times to increase the
recording time in: x 30-minute intervals up to four hours x 1-hour intervals up to nine hours (LP) Result: The length is displayed on the television displays. The selected programme is recorded for the length of time requested. At the end of that time, the VCR stops recording automatically.
6 To stop recording, press s once.
If the cassette is ejected when you start recording, check that the safety tab is intact or the opening is covered with adhesive tape. x If you reach the end of the tape while recording, the cassette rewinds automatically.
7 If you wish to cancel the recording before the end,
press VCR STANDBY/ON (STANDBY/ON).

If the end of the tape is reached while recording: x The recording stops x The VCR automatically turns off
Select VPS recording x Press the or buttons, 5(SV-657GX/SV-655GX) IPC + V button to activate the timer. until the V/P selection flashes. ) is displayed. Result: The Record indicator ( x Press the " or buttons If no cassette has been inserted when you press + NICAM until the ON or - indication VCR STANDBY/ON (STANDBY/ON) the Record IPC V is displayed. indicator ( ) flashes. If the safety tab on the Do not select VPS unless you are sure the programme cassette has been broken, the cassette is NICAM you wish to record is broadcast with VPS. If you do set ejected. Insert the appropriate cassette. VPS ON (by selecting ON in the right - hand column on the screen), then you must set up the start-time 8 Refer to page 20 if you wish to: EXACTLY according to the published TV schedule. x Check that your VCR has been programmed Otherwise the timer recording wont take place. correctly x Cancel a preset recording Select the recording x Press the or buttons, speed 5(SV-657GX/ until the recording speed SV-655GX/SV-455GX only) selection flashes. The numbers next to each TV programme listing are ShowView code numbers, which x Press the " or buttons allow you to programme your videorecorder until the correct indication instantly with the remote control. Tap in the is displayed: ShowView code for the programme you AUTO (Auto Tape Speed wish to record. Select) : see page 20 SP (Standard Play) ShowView is a trademark of Gemstar Development Corporation. The ShowView system is manufactured under licence from Gemstar LP (Long Play)
7 Press the VCR STANDBY/ON (STANDBY/ON)

Development Corporation.

Page 20
Using the Timer Programming Feature
The Timer Programming feature allows you to preset the VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset. Before presetting a recording, check that the date and time are correct.
Checking a Preset Recording

Playing a Cassette

This function allows you to play back any prerecorded cassette.

Heard in MONO monaural.

Page 24

Auto Repeat Play

You can set repeat play to repeat the tape continuously from beginning to end.

Interval Repeat Play

You can set interval repeat play to repeat the cassette several times for special interval.
AV-Link Function of this VCR 5(SV-657GX Only)
If your TV has Easy Link / nexTViewLink / AV-Link function, the VCR can automatically store stations memorized in the TV in the same channel position as those of the TV. Using a SCART cable (21 pins), a mutual control is available with the TV, VCR, SAT receiver, etc. q The VCR automatically stores all your current TV stations in the VCR in the same position order as the TV channels. (TV CH DOWNLOAD) q Even if the TV is in standby mode, the TV automatically turns on and displays the video picture when you start playback on the VCR. q The VCR automatically selects the same picture as you are watching on the TV, and record it. (TV PICTURE) q The VCR takes in the data and turns to timer standby mode, after a program data reserved is transferred to the VCR by a TV using such as a EPG (Electronic Program Guide). In this case, the TVs and the VCRs channel position must be set to the same TV station. The position could be stored from 1 to 80. Also the VCRs clock must be set. Connection Connect your EasyLink / nexTViewLink / AV-Link TV to the AV1 (EURO AV) socket on the rear of the VCR using the SCART cable. Refer to your TVs manual additionally. - Connection to your EasyLink / nexTViewLink / AV-Link TV TV

AERIAL INPUT AUDIO/VIDEO

AV2 (SATELLITE) IN
2 Press the corresponding ", or , buttons to select the EASY OPERATION option. 3 Press the OK button to select this option. Result: The EASY OPERATION menu is displayed. 4 Press the corresponding " or buttons, until the REPEAT PLAY option is selected. 5 To. Press or , until. Repeat play ON is displayed.
Do not wish to repeat play OFF is displayed. 6 On completion, press MENU twice to exit the menu.
2 Press the corresponding ", or , buttons to select the EASY OPERATION option. 3 Press the OK button to select this option. Result: The EASY OPERATIONN menu is displayed. 4 Press the corresponding " or buttons, until the NO. OF INTERVAL REPEAT option is selected. 5 To. Press , until.
Interval repeat play 5, 10, 15 is displayed. (choose repeat time 5 times, 10 times, 15 times) OFF is displayed.
Cancel interval repeat play
6 On completion, press MENU twice to exit the menu. 7 To select interval during playback, press the
INPUT/REPEAT button at the desired start point. Result: INTERVAL REPEAT SETTING is displayed.Press the INPUT/REPEAT button one more time at the desired end point. Result: The tape is automatically rewound to the start point. INTERVAL REPEAT is displayed.

AERIAL IN

ShowView EXTEND 5(SV-657GX/ SV-655GX/SV-455GX/SV-255GX Only)
To prevent delays or over-runs the VCR has a function called ShowView EXTEND allowing you to extend the recording time by up to 60 minutes.

Using the Tape Counter

AERIAL OUTPUT
The tape counter: x Indicates the elapsed time in the play and record modes (hours, minutes and seconds) x Is reset when a cassette is inserted in the VCR x Allows you to find the beginning of a sequence easily

IN/OUT (SCART)

Only use if PDC is not available or set to OFF.
If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.
When connecting another VCR supporting EasyLink / nexTViewLink / AV-Link functions The nexTViewLink system can connect 2 VCRs (VCR1 and VCR2) at the same time. This VCR is adjusted to VCR1, so it should be connected to VCR2. this VCR
1 Press the MENU button on the remote control. 2 Press the corresponding ", or , buttons to select the EASY OPERATION option. 3 Press the OK button to select this option. Result: The EASY OPERATION menu is displayed. 4 Press the corresponding " or buttons, until the SHOWVIEW EXTEND option is selected. 5 Press or buttons to set the ShowView EXTEND
time by increments of 10 minutes.
1 Insert a cassette in your VCR. 2 To set the tape counter to zero at the beginning of a
sequence: x Press DISP./ or DISPLAY twice to display the counter x Press CLR/RST when you want to set the tape counter to zero 3 When you are ready, x Start playback or Recording. x Press the s button. x To fast-froward or rewind to the sequence at which the counter was set to zero, press or .

SCART cable

IN/OUT(SCART)
- Connection to your EasyLink / nexTViewLink / AV-Link TV and a satellite receiver
Satellite antenna AERIAL INPUT
AERIAL OUTPUT SCART cable SATELLITE IN
6 To turn off, press or buttons repeatedly until OFF shows.
Some VCR information, such as the counter, can be displayed on the television screen (unless you have deactivated the OSD mode; refer to page 16). Press DISP./ or DISPLAY: x Once to display the current function, programme number, recording speed, date, time and counter x Twice to display the counter only x Three times to display the time remaining on the cassette x Four times to clear the display

AERIAL INPUT

AUDIO/VIDEO

21 pins

Page 26
TV programme Download 5(SV-657GX Only)
Preparation: x Turn on the TV. x Select the video channel or the video input mode on the TV.
TV Picture Record Setting 5(SV-657GX Only)
Preparation : turn on the TV.
Connecting an RCA Audio/Video Input Cable 5(SV-657GX/SV-655GX/SV-651GX Only)
You can connect other audio/video equipment to your VCR using audio/video cables if the appropriate outputs are available on the equipment chosen. Examples: x You wish to copy a video cassette with the help of a second VCR. x You wish to play back and/or copy pictures taken with a camcorder.
Using the Assemble Edit Function
This function allows you to start a new recording at a specific position on the cassette while maintaining a very smooth scene change.
1 Press the MENU on the remote control.
1 Press the MENU on the remote control. 2
Result: The programming menu is displayed. Press the corresponding ", or , buttons to select the INSTALLATION option. And then press the OK button to select this option. Result: The INSTALLATION menu is displayed.
2 Press the corresponding ", or , buttons to select the INSTALLATION option. 3
And then press the OK button to select this option. Result: The INSTALLATION menu is displayed. Press the " or buttons to select AV-LINK SETTING option. And then press the !button to select this option. The AV-LINK menu is displayed. Result:
1 Insert the cassette to be edited in your VCR. 2 Press the ll button to start playback. 3 When you reach the position from which you wish to start the new recording, press the ll button. 4 Press the F.ADV (
) button again as often as necessary to advance frame by frame, until the exact recording position is located. down for a while to activate the Assemble Edit function. Result: Record symbol flashes in the display.
3 Press the " or buttons to select AV-LINK SETTING option. And then press the !button to 6
select this option. Result: The AV-LINK menu is displayed. Press the " or buttons, until the TV CH DOWNLOAD option is selected. And then press the button to select this option. Press the button to start TV CH DOWNLOAD function. When the downloading finished, then TV CH DOWNLOAD FINISHED is displayed. Press the MENU button to exit. x The available position numbers on the VCR are 1 to 80. x When the TVs channel position is readjusted, the VCR automatically makes TV CH DOWNLOAD.

3 Press two REC buttons to start recording.
Result: The VCR automatically selects the same picture as you are watching on the TV and starts recording. Depending on the picture sources, the recording switches the method. See next page.

The VCR records:

It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright.
7 When you have finished recording, press s on both
1 Connect the VCR, from which the cassette is to be
. copied, to the appropriate SCART audio and video input connectors on the rear of your VCR. You can also use an RCA audio and video cable to connect the AUX input on the front of your VCR. 5(SV-657GX/SV-655GX/SV-651GX only)
If you wish to view the cassette being copied:
x Your VCR must be connected as usual to
4 To stop a recording, press STOP (s ) once.
the television (see page 10 for further details)
x This recording is not available on the timer

programme recordings.

During recording, if you change the channel or the input mode on the TV, the recording will be: Ex. TV channel 1 Continued. Stopped.
2 Insert a blank cassette in your VCR. 3 Insert the pre-recorded cassette in the other video
source (VCR or camcorder).
4 Press the INPUT button to select the appropriate
x x Stopped. Ex. VCR channel 1 Continued.
input on your VCR: AV1 or AV2 for the SCART input AUX for the RCA input 5(SV-657GX/SV-655GX/ SV-651GX only)

Page 28

Audio Dubbing a Pre-recorded Cassette 5(SV-657GX Only)
With the Audio Dubbing function, you erase the previously recorded sound and replace it with a new soundtrack from: x A CD player x A microphone connected to a sound system x A cassette player Restriction: Audio dubbing is applicable only to the longitudinal audio track (normal audio).
Using the TV Buttons on the Remote Control 5(SV-657GX/SV-655GX Only)
Your VCR remote control will work with Samsung televisions and compatible brands. To determine whether your television is compatible, follow the instructions below.

Auto Power Off

The Auto Power Off feature automatically turns off your VCR if no signal is received and you do not press any button for the selected time.
ECO Mode-Reducing Standby power consumption
Low Power Mode reduces the Standby power consumption of the VCR when in Standby mode. Useful, for example, when you are away from the house on holiday. It saves actually turning the VCR off.

TV Frequency Table (System-D/K + B/G)
Explanation/Solution Check that the power plug is connected to a wall outlet. Have you pressed the VCR STANDBY/ON (STANDBY/ON) button? A video cassette can only be inserted with the window side up and the safety tab facing you. Check the VCR aerial connections. Is the VCR tuner properly set? Check if the safety tab is intact on the cassette. Was the VCR STANDBY/ON (STANDBY/ON) button pressed to activate the timer? Re-check the recording start/stop time settings. If there was a power failure or interruption during timer recording, the recording will have been cancelled. Check to see if you are using a prerecorded tape. Check the TUNER/EXTERNAL setting. It should be on TUNER. Check the TV/VCR aerial connections. Press the PROG/TRK (" or ) / TRK ( minimize this effect. or ) buttons to
001~012 :OIRT 013~020 :ITALY 021~069 :CCIR STD UHF 071~075 :CCIR CABLE 101~112 :CCIR STD VHF
DISP CH Band V-L V-L V-L V-L V-L V-H V-H V-H V-H V-H V-H V-H V-L V-L V-L V-H V-H V-H V-H V-H UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF Fp 49.75 59.25 77.25 85.25 93.25 175.25 183.25 191.25 199.25 207.25 215.25 223.25 53.75 62.25 82.25 175.25 183.25 192.25 201.25 210.25 471.25 479.25 487.25 495.25 503.25 511.25 519.25 527.25 535.25 543.25 551.25 559.25 567.25 575.25 583.25 591.25 599.25 607.25 615.25 623.25 631.25 639.25 647.25 655.25 663.25 671.25 679.25 687.25 695.25 703.25 711.25 719.25 727.25 735.25 743.25 751.25 759.25 767.25 775.25
201~241 :CCIR STD CABLE 244~250 :MOROCO 251~255 :BELGUIM
CIS Czechoslovakia Hungary Bulgalia Poland
Fp 783.25 791.25 799.25 807.25 815.25 823.25 831.25 839.25 847.25 855.25 69.25 76.25 83.25 90.25 97.25 48.25 55.25 62.25 175.25 182.25 189.25 196.25 203.25 210.25 217.25 224.25 105.25 112.25 119.25 126.25 133.25 140.25 147.25 154.25 161.25 168.25 231.25 238.25 245.25 252.25 259.25 266.25 273.25 280.25 287.25 294.25 303.25 311.25 319.25 327.25 335.25 343.25 351.25 359.25 367.25 375.25 383.25 391.25 399.25 STD CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR CCIR DISP CH S34 S35 S36 S37 S38 S39 S40 S41 M4 M5 M6 M7 M8 M9 M10 U1 U2 U3 U4 U5

If you are unable to solve the problem after reading the above instructions, note: x The model and serial number on the rear of your VCR x The warranty information x A clear description of the problem Then contact your nearest SAMSUNG after-sales service.
R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 A B C D E F G H E21 E22 E23 E24 E25 E26 E27 E28 E29 E30 E31 E32 E33 E34 E35 E36 E37 E38 E39 E40 E41 E42 E43 E44 E45 E46 E47 E48 E49 E50 E51 E52 E53 E54 E55 E56 E57 E58 E59

Page 32

THIS APPLIANCE IS DISTRIBUTED BY

ELECTRONICS

AC68-01823H

 

Tags

SH-FX67 AQV12msan DMC-FZ50 MS6383E DB538RMP SMH7185STG TS-440 Nuvi 255 GR-292SQA LBT-XB6K Wars Kane Blazer 12 Chronographstopwatch VD55 Single AXZ610 V-C7770CER Symphony N600I 286 336 KX-TG2632B KV-21DA75 DTH 8657 Model 5100 MCT703 Speedstream 4200 Aficio 2090 E-TEN M800 Laser 550-24 ST Cf210 KDL-32LL150 DCC170 YP-K3JZB Quick RDR-AT200 Tutorial G-9000 Server 1500 LN32A610 SDX-550V Tangent UNO Audio GR 213U Camera Autopilot Tiger Nokia 6021 GR-D370U Cuep2-M T913V MA-EF303hs-U Pointer XJ600 SK Kontrol NM600 Hdmi PD606 GA-8I865gme-775-rh-AS MKS-80 VR330 Deluxe AWT1332AA FTM-10SR SW51-201 D Dyson DC04 IMP-400 EXP221 00C Piranhamax 150 DG-stomp IPF8000 VL600 Monitors YP-S2QU SGH-X426 UE-37C5000 FE-X41 Motorola H550 LM-230 Macro 750 SX-KN1500 SRU5010 87 WTA 26 AR-161 KS2149-4 Console Mk4 1 0 KDL-40W5800 Hamilton 10HF Mitsubishi M320 EUF2704 CX7430 LC-26DA5U 35 PL V9180SE TD EL-6360 KDL-40NX710 Ro20h1 TM-T20 136 FAP Review CS186

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101