Today is the day that the true consumer model of the Gear VR, the 3rd iteration of the product, hits shelves and doorsteps after ...
Visit http://galaxys5info.com/concept to know more about this Samsung Galaxy S5 concept. Galaxy SV will be the next flagship ...
This video is for unboxing Samsung Galaxy S5. For more on S5 visit http:\\www.DialAndroid.com.
Chester U3A Equipment Available for Group Use
The following equipment is already used on a regular basis by a number of groups and sometimes at the meetings at St Columba's Church Hall. Please check with Gordon Bowyer (01244-371779) regarding availability.
Compaq Laptop Computer Model PP2140 Dell Laptop Computer Model Studio 1737 HP Laptop Computer 2-off Optima Projectors Gnome Elite Overhead Projector Rollei 35 mm Slide Projector Samsung SV DVD 40 Combi Player Matsui V DVD 500 Combi Player Braun Epidiascope Anchor Powered Speaker AN 100 Samsung Video Camera VP-D963 Jessops Tripod TP -off Hearing Loops /1 CDSN & 1 Connevans/ Speakezzee Megamouth PA System
List updated on 17 November 2011
Alignment and Adjustments
2-1-2 Head Switching Point Adjustment
1) Playback the alignment tape. 2) Press the "TEST" botton on VCR MAIN PCB to set the adjustment mode. (See Fig. 2-2) 3) Press the "1, 0" buttons; remote control adjustment operates automatically. (See Fig. 2-1)
2-1-3 NVRAM Option Setting
1) NVRAM Option is adjusted in the factory. 2) In case Main PCB Micom (IC601) and NVRAM (IC603 ; EEPROM) are replaced, be sure to set the corresponding option number of the required model. (If the option is not set, the unit will not operate.) 1) Press the "TEST" botton on VCR MAIN PCB to set the adjustment mode. (See Fig. 2-2) 2) Press the "1, 4" button on the remote control. The option setting appears. (See Fig. 2-3) 3) Select the option number (See table 2-1) of corresponding model with " , , , " buttons on the remote control. 4) After selecting the option number is completed, press the " " button of remote control. (If " " button is pressed, the selected number is changescolor. ; See Fig. 2-4) 5) Press the ...