3. Making Computer Detect the New Device
Run the CMOS(BIOS) set-up program to detect the new hard disk drive.

SAMSUNG

HDD INSTALLATION GUIDE
1 Go into CMOS screen during the booting of the computer. 2 Make the computer detect the hard disk.
This product is a precision designed mechanism and is very sensitive to shock and electrostatic discharge (ESD). When storing, please avoid high temperature and humidity and use the origirnal ESD protection package in which the product was shipped at the time of purchase. Please handle the product carefully. Damaged or detached labels or any other components may directly cause product malfunction and void warranty. 1. Configuring your Hard Disk Drive (Master, Slave)
In case drive capacity is 32GB or more, please refer to bellow diagram.

General Pin Setting

For descriptive details of the program, refer to the computers users manual
If your computer supports IDE HDD Auto Detection, the hard disk drive will automatically be detected. If your computer does not support auto detect, go into the User Define Mode and by referring written information on the product, set the correct settings for Cylinder, Head, and Sector and if some Bios must be, set the HDD Mode to LBA. Save the changed details and exit.
Setting as Master All other Series Pin Setting

(AB + FH)

Setting as Slave

(BD + FH)

Cable Select

(BD + EF)

4. Partitioning and Formatting the Drive
Refer to your Operating System manual or system manual for partitioning and formatting.
Pin Setting (32 GB Clip Pin Setting)
5. Samsung World Wide Web Site
Additional information can be obtained at www.samsunghdd.com. Cable Select

(CD + EF)

Setting as Master

(AB + CD)

(CD + FH)
2. Installing Your Hard Disk Drive
Note: Turn off the system power !
Cover opening mechanism and the location of the hard disk drive may vary from one computer to another.
SAMSUNG ELECTRONICS CO., LTD. INFORMATION MEDIA BUSINESS STORAGE SYSTEM DIVISION HEAD OFFICE: 94-1, IM SOO-DONG, KUMI-CITY KYUNG BUK, KOREA 730-350 FAX : 82-54-479-5567 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ' Samsung Electronics Co., Ltd. Printed in Korea. BF68-00099B Rev.03
Turn off the computer, unplug the external cables, and open computer cover. Mount the hard disk drive in the designated place in the computer with screws provided with the product. Connect 40 pin interface cable and power cable. Make sure that the direction of the cables are correct and matches the shape of the receptacles when connecting cables. Incorrect cable connection may damage the hard disk drive.

Number 1Pin