Reviews & Opinions
Independent and trusted. Read before buy Samsung SWF-P10!

Samsung SWF-P10

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Samsung SWF-P10 - Introduction, size: 416 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Samsung SWF-P10About Samsung SWF-P10
Here you can find all about Samsung SWF-P10 like manual and other informations. For example: review.

Samsung SWF-P10 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Samsung SWF-P10 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Samsung SWF-P10 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

SWF P14-UK(GB)-00411A-dw

8/20/02 1:30 PM

Page 1

Washing Machine Owners Instructions
SWF-P14 m SWF-P12 m SWF-P10 m SWF-P8 m

Page 2

Safety Precautions
Congratulations on your purchase of this Samsung washing machine. These Owner's Instructions contain valuable information on the installation, use, and care of this appliance. Please take the time to read these instructions so that you can take full advantage of the washing machine's features and enjoy this appliance for many years to come.
Before using the appliance
Packing materials can be dangerous to children; keep all packing material (plastic bags, polystyrene, etc.) well out of the reach of children. The appliance is designed for home use only. Make sure that water and electrical connections are made by qualified technicians, observing the manufacturer's instructions (see "Installing the Washing Machine" on page 2) and local safety regulations. All packaging and shipping bolts must be removed before the appliance is used. Serious damage may occur if they are not removed. See "Removing the shipping bolts" on page 3. Before washing clothes for the first time, you must run a complete cycle without clothes. See "Washing for the first time" on page 8.

Safety instructions

Before cleaning or carrying out maintenance, unplug the appliance from the electrical outlet or set the (On/Off) button to Off. Make sure that the pockets of all clothing to be washed are empty. Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause extensive damage to the appliance. Always unplug the appliance and turn off the water after use. Before you open the door of the appliance, check that the water has drained. Do not open the door if you can still see water. Pets and small children may climb into the appliance. Check the appliance before each use. The glass door becomes very hot during the washing cycle. Keep children away from the appliance while it is in use. Do not attempt to repair the appliance yourself. Repairs made by inexperienced or unqualified persons may cause injury and/or make more serious repairs to the appliance necessary. If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. This appliance should only be serviced by an authorized service center, and only genuine spare parts should be used.
q SAVE THESE INSTRUCTIONS

Table of Contents

Safety Precautions------------------------------------------- inside cover lnstalling the Washing Machine ------------------------------------------2
Unpacking the washing machine ----------------------------------------------------2 Overview of the washing machine --------------------------------------------------2 Selecting a location -------------------------------------------------------------------- 3 Adjusting the leveling feet ------------------------------------------------------------3 Removing the shipping bolts --------------------------------------------------------3 Connecting the water supply hose ------------------------------------------------- 3 Positioning the drain hose ----------------------------------------------------------- 4 Plugging in the machine -------------------------------------------------------------5
Washing a Load of Laundry -------------------------------------------------6
Overview of the control panel ------------------------------------------------------ 6 Washing for the first time -------------------------------------------------------------8 Putting detergent in the washing machine ----------------------------------------8 Washing clothes using Fuzzy Logic ------------------------------------------------9 Setting prewash -----------------------------------------------------------------------10 Washing clothes manually ----------------------------------------------------------10 Using delay start --------------------------------------------------------------------- 10 Washing tips and hints --------------------------------------------------------------11
Maintaining the Washing Machine ----------------------------------12
Draining the washing machine in an emergency ------------------------------12 Repairing a frozen washing machine --------------------------------------------12 Cleaning the exterior ----------------------------------------------------------------12 Cleaning the detergent drawer and recess ----------------------------------- 12 Cleaning the debris filter ------------------------------------------------------------ 13 Cleaning the water hose mesh filter ----------------------------------------------13

Troubleshooting -----------------------------------------------------------------14
Problems and solutions -------------------------------------------------------------14 Understanding error messages ----------------------------------------------------14
Programme chart ---------------------------------------------------------------15 Appendix -------------------------------------------------------------------------------16
Fabric care chart --------------------------------------------------------------------- 16 Electrical warnings ------------------------------------------------------------------ 16 Protecting the environment -------------------------------------------------------- 17 Declaration of conformity ---------------------------------------------------------- 17 Specification --------------------------------------------------------------------------- 17
SAMSUNG Washing Machine Owners Instructions 1
Installing the Washing Machine
Unpacking the Washing machine
Unpack your washing machine and inspect it for shipping damage. Also make sure that you have received all of the items shown below. If the washing machine was damaged during shipping or you do not have all of the items, contact your Samsung dealer immediately.
Overview of the washing machine
Maximum hot water supply temperature 60 degrees.

Worktop

Control panel

Detergent drawer Door

Debris filter Door release Base cover Adjustable feet Emergency drain tube
Wrench Drain Hose Cold Water supply hose Hose guide
Plug * (Option) Hot Water supply hose Bolt hole covers
2 SAMSUNG Washing Machine Owners Instructions

Page 3

Selecting a location
Before you install the washing machine, select a location with the following characteristics: A hard, level surface (if the surface is uneven, see "Adjusting the leveling feet," below) Away from direct sunlight. Adequate ventilation Room temperature that will not fall below 0 C Away from sources of heat such as coal or gas Make sure that the washing machine does not stand on its power cord. Ventilation openings must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.
Adjusting the leveling feet
If the floor is uneven, adjust the feet (do not insert pieces of wood or any other objects under the feet): 1. Loosen the leg bolt by turning it with your hand until it is at the desired height. 2. Tighten the locking nut by turning it with the supplied wrench.
Place the washer on a sturdy, flat surface. If the washer is placed on an uneven or weak surface, noise or vibration occurs. (Only a l degrees angle is allowed.)
Removing the shipping bolts
Before using the washing machine, you must remove the five shipping bolts from the back of the unit. To remove the bolts:
1. Loosen all bolts with the supplied wrench before removing them. 2. Take each bolt head and pull it through the wide part of the hole. Repeat for each bolt. 3. Fill the holes with the supplied plastic covers. 4. Keep the shipping bolts for future use.

Connecting the water supply hose(Option)
1. Remove the adaptor form the water supply hose. 2. First, using a + type screw driver, loosen the four screws on the adaptor. Next, take the adaptor and turn part(b) following the arrow until there is a 5mm gap. 3. Connect adaptor to the water tap by tightening the screws firmly. Then, turn part (b) following the arrow and put(a) and (b) together.
4. Connect the water supply hose to the adaptor. Pull down part (c) of the water supply hose. When you release part (c) the hose automatically connects to the adaptor making a click sound. 5. Connect the other end of the water supply hose to the inlet water valve at the top of the washer. Screw the hose clockwise all the way in.
If the water tap has a screw type faucet, connect
the water supply hose to the tap as shown.
NOTICE After completing connection, if water leaks from the hose, then repeat the same steps. Use
the most conventional type of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the faucet into the adaptor.
SAMSUNG Washing Machine Owners Instructions 3

Page 4

Connecting the water supply hose
The water supply hose must be connected to the washing machine at one end and to the water faucet at the other. Do not stretch the water supply hose. If the hose is too short and you do not wish to move the water faucet, replace the hose with a longer, high pressure hose. To connect the water supply hose: 1. Take the L-shaped arm fitting for the cold water supply hose and connect to the cold water supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the cold water supply hose to your sink's cold water faucet and tighten it by hand. If necessary, you can reposition the water supply hose at the washing machine end by loosening the fitting, rotating the hose, and retightening the fitting. Option: 1. Take the red L-shaped arm fitting for the hot water supply hose and connect to the red hot water supply intake on the back of the machine. Tighten by hand. 2. Connect the other end of the hot water supply hose to your sink's hot water faucet and tighten it by hand. 3. Use a Y-piece if you only want to use cold water.
Positioning the drain hose
The end of the drain hose may be positioned in three ways:

Over the edge of a sink

The drain hose must be placed at a height of between 60 and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the faucet with a piece of string to prevent the drain hose from moving.
ln a sink drain pipe branch
The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above the ground.

ln a drain pipe

Samsung recommends you use a 65 cm high vertical pipe; it must be no shorter than 60 cm and no longer than 90 cm.
4 SAMSUNG Washing Machine Owners Instructions

Page 5

Plugging in the machine
For European Users. You will NOT need to ground the plug of the washing machine. For U.S.Users. You MUST ground the plug of the washing machine.
Check with a licensed electrician before using the machine to make sure it is properly grounded.

For U.K.Users.

Wiring lnstructions
WARNING THIS APPLIANCE MUST BE EARTHED.
This appliance must be earthed. In the event of an GREEN AND electrical short circuit, earthing reduces the risk of electric YELLOW shock providing an escape wire for the electric current. The appliance is equipped with a mains lead which includes an earth wire for connecting to the earth terminal of your mains plug. The plug must be plugged into a socket that is properly installed and earthed. *The wires in this mains lead are coloured in accordance with the following code: Green and yellow :Earth Blue :Neutral Brown :Live AS the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings indentifying the terminals in your plug, proceed as follows. Connect the green and yellow wire to the terminal in the plug marked with the letter E or the earth symbol ( ) or coloured green or green-andyellow. Connect the blue wire to the terminal marked with the letter N or coloured black. Connect the brown wire to the terminal marked with the letter L or coloured red. * Consult a qualified electrician or service technician if in doubt about any of these instructions. The manufacturer of this washing machine will not accept any liability for damage to persons or material for non observance of these requirements. There are no user+serviceable parts inside the washing machine and if the mains lead of this appliance is damaged, it must only be replaced by qualified service personnel approved by the manufacturer because special tools are required.

13 AMP FUSE

BLUE WARNING
Ensure that the plug and power cord are not damaged before use. If you have any reason to remove the moulded plug from this appliance, immediately remove the fuse and dispose of the plug. Do not connect the plug to a mains socket under any circumstances as there is a danger of electric shock.

CIRCUITS

Your washing machine should be operated on a separate circuit from other appliances. Failure to do this may cause the circuit breaker to trip or the fuse to blow.
SAMSUNG Washing Machine Owners Instructions 5

Page 6

Washing a Load of Laundry
Overview of the control panel

(SWF-P14/SWF-P12)

(SWF-P10/SWF-P8)
1. Detergent dispenser 2. Display panel
Displays the remaining wash cycle time and error messages.
3. Temperature selection button
Press the button repeatedly to cycle through the available water temperature options (cold water, 30 C, 40 C , 60 C and 95 C). When pressing this button during washing, you can see the selected temperature in the display panel.

4. Spin selection button

Press the button repeatedly to cycle through the available spin speed options. P14 P12 P10 P8 no, no, no, no, rh, rh, rh, rh, 400, 400, 400, 400, 600, 600, 600, 600, 800, 1000, 1200, 1400 rpm 800, 1000, 1200 rpm 800, 1000 rpm 800 rpm
When pressing this button during operation, you can see the selected spin speed in the display panel.

5. Delay Start button

Press the button repeatedly to cycle through the available delayed start options (from 1 hour to 24 hours in one hour increments).
6 SAMSUNG Washing Machine Owners Instructions

Page 7

6. Function button
Press the button repeatedly to cycle through the available partial wash options {Wash + Rinse +Spin Prewash + Wash + Rinse + Spin Spin Rinse(1 time) + Spin Rinse(2 times) + Spin Rinse(3 time) + Spin Wash + Rinse + Spin}. Note: Prewash is available only with Cotton, Synthetic or Delicate programs. "Rinse(3 times)+Spin" is not available with Quick,Eco or Drain programs.

7. Fuzzy Control dial

Turn the dial to select one of the six or seven available wash programs. P8, P10 P12, P14 Cotton, Synthetic, Delicate, Wool, Quick, Eco Cotton, Synthetic, Delicate, Wool, Quick, Eco, Drain

8. Start/Pause button

Press to pause and restart programs.

9. Door Open button

Press to open the washing machine door.

(On/Off) button

Press once to turn the washing machine on, press again to turn the washing machine off. If the washing machine power is left on for longer than 10 minutes without any buttons being touched, the power automatically turns off.
SAMSUNG Washing Machine Owners Instructions 7

Page 8

Washing for the first time
Before washing clothes for the first time, you must run a complete cycle without clothes. To do this: 1. Press the (On/Off) button. 2. Pour a little detergent into compartment in the detergent drawer.

3. 4. 5.

Turn on the water supply to the washing machine. Press the Temperature button repeatedly until 40 C is displayed. Press the Start/Pause button. This will remove any water remaining in the machine from the manufacturer's test run.
Putting detergent in the washing machine
1. Pull out the detergent drawer. 2. Add laundry detergent into compartment 3. Add softener into compartment 4. Add prewash detergent into compartment. (if you desire).

(if you desire).

*Option
Using Hot Water The hot water valve is operated when you select a water temperature option above 60C (60 C or 95 C).

To add liquid detergent:

1. Remove the divider from its slot and insert it into compartment.
2. Pour in the liquid detergent. Liquid detergents and Delay Start. (Please see "Delay Start" on pages 6 and 10) With Delay start use a dosage container for liquid detergents, e. g. ball, otherwise the liquid detergent will run slowly out of the soap dispenser and congeal. If a blockage and nasty smell occur, take the dosage container out of the drum at the end of the programme. With liquid detergents use the liquid insert in the soap dispenser. Or use dosage aids, e. g. dosage or bags which are provided with the detergent.
8 SAMSUNG Washing Machine Owners Instructions

Page 9

Washing clothes using Fuzzy Logic
Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Logic" automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed. To wash clothes using the Fuzzy Logic programs: 1. Turn on your sink's water faucet. 2. Press the (On/Off) button. (On/Off). 3. Press the Door Open button. Note: You cannot open the door until you press 4. Open the door. 5. Load the articles one at a time loosely into the drum, without overfilling. 6. Close the door. 7. Add the detergent, softener, and prewash detergent (if necessary) into the appropriate compartment. Note: Prewash is only available when washing cotton, synthetic and delicate garments. It is only necessary if your cotton clothing is heavily soiled. If you wish to use prewash, please see "Setting prewash" on page 10. 8. Turn the Fuzzy Control dial to select the appropriate program for the type of clothes you are washing: Cotton, Synthetic, Delicate, Wool, Quick (for a fast cycle), Eco ( to economize on water usage), Drain (SWF-P14, SWF-P12).

You will see the indicators light up on the control panel. 9. At this time, you can control the wash temperature, spin speed and delay time by pressing the appropriate option button. 10. Press the Start/Pause button on the Fuzzy Control dial and the wash cycle will begin. The time delay indicator will light up and the remaining time for the cycle will appear in the display. When the cycle is finished: Ten minutes after the total cycle has finished, the power will turn off automatically. 1. Press the Door Open button. 2. Remove laundry.
SAMSUNG Washing Machine Owners Instructions 9

Page 10

Setting prewash
Prewash is only available when washing cotton, synthetic or delicate clothes. To use prewash: 1. Load the prewash detergent into compartment of the detergent drawer. 2. Select the wash program (Cotton, Synthetic or Delicate). 3. Press the Function button until the "Prewash" indicator lights up on the control panel. 4. Press Start/Pause to begin the cycle.

Washing clothes manually

You can wash clothes manually without using the Fuzzy Logic feature. To do so: 1. Turn on the water at the water source sink. 2. Press the (On/Off) button on the washing machine. 3. Press the Door Open button. Note: You cannot open the door until you press (On/Off). 4. Open the door. 5. Load the articles one at a time loosely into the drum, without overfilling. 6. Close the door. 7. Put the detergent and, if necessary, softener or prewash detergent, in the appropriate compartments. 8. Press the Temperature button to select the temperature (cold water, 30C, 40C, 60C, 95C) 9. Press the Spin button to select the spin speed, [no, rh, 400, 600, 800, , no, revolutions per minute(rpm)]. Note: The hold program allows you to take clothes that are dripping wet out of the washing machine. no : No Spin, rh : Rinse Hold. 10. Repeatedly press the Function button to select the cycle you prefer: Prewash (for Cotton, Synthetic, Delicate only), Wash, Rinse or Spin 11. Press the Start/Pause button and the machine will begin the cycle. When the cycle is finished: 1. Press the Door Open button. 2. Remove laundry.

Using delay start

You can set the washing machine to start your wash from one to a twenty four hour delay. To do this: 1. Manually or automatically set your washing machine for the type of clothes you are washing. 2. Press the Delay Start button repeatedly until the delay time is set. 3. Press the Start/Pause button. The Delay Start indicator will light, and the clock will begin counting down until it reaches your start time. 4. To cancel Delay Start, press the (On/Off) button, then turn washing machine on again.

10 SAMSUNG Washing Machine Owners Instructions

Page 11

Washing tips and hints
Sorting your laundry : Sort your laundry according to the following characteristics:
Type of fabric care label symbol : Sort laundry into cottons, mixed fibers, synthetics, silks, wools and rayon. Color : Divide whites and colors. Wash new, colored items separately. Size: Placing items of different sizes in the same load will improve the washing action. Sensitivity: Wash delicate items separately, using the Delicate wash program for pure new wool, curtains and silk articles. Check the labels on the items you are washing or refer to the fabric care chart in the appendix.
Emptying pockets : Coins, safety pins and similar items can damage linen, the washing machine drum, and the water tank. Securing fasteners : Close zippers and fasten buttons or hooks; loose belts or ribbons

should be tied together.

Prewashing cotton : Your new washing machine, combined with modern detergents,
will give perfect washing results, thus saving energy, time, water and detergent. However, if your cotton is particularly dirty, use a prewash with a protein-based detergent.
Determining load capacity: Do not overload the washing machine or your laundry
may not wash properly. Use the chart below to determine the load capacity for the type of laundry you are washing. Fabric Type Colored/cotton -average/lightly soiled -heavily soiled Synthetics Delicates Wools Load Capacity 5.0 kg 5.0 kg 2.5 kg 2.0 kg 1.5 kg
Detergent tips: The type of detergent you use is based on the type of fabric (cotton,
synthetic, delicate items, wool), color, wash temperature, degree and type of soiling. Always use "low suds" laundry soap, which is designed for automatic washing machines. Follow the detergent manufacturer's recommendations based upon the weight of the laundry, the degree of soiling, and the hardness of the water in your area. If you do not know how hard your water is, ask your water authority. Note: Keep detergents and additives in a safe, dry place out of the reach of children.
SAMSUNG Washing Machine Owners Instructions 11

Page 12

Maintaining the Washing Machine
Draining the washing machine in an emergency
1. 2. Unplug the washing machine from the power supply. Remove the base cover by using a screw driver to pry it off.
Unscrew the emergency drain cap by turning left. Grip the cap on the end of the emergency drain tube and slowly pull it out about 20 cm.

4. 5. 6.

Allow all the water to flow into a bowl. Reinsert the drain tube and screw the cap back on. Replace the base cover.
Repairing a frozen washing machine

If the temperature drops below freezing and your washing machine is frozen: 1. Unplug the washing machine. 2. Pour warm water on the source faucet to loosen the water supply hose. 3. Remove the water supply hose and soak it in warm water. 4. Pour warm water into the washing machine drum and let it sit for 10 minutes. 5. Reconnect the water supply hose to the water faucet and check if the water supply and drain operations are normal.

Cleaning the exterior

1. 2. 3. Wipe the washing machine surfaces, including the control panel, with a soft cloth and non-abrasive household detergents. Use a soft cloth to dry the surfaces. Do not pour water on the washing machine.
Cleaning the detergent drawer and recess
1. Press the release lever on the inside of the detergent drawer and pull it out.
Remove the cap from compartment. Remove the liquid detergent divider from compartment. Wash all of the parts under running water. Clean the drawer recess with an old toothbrush. Reinsert the cap (Pushing it firmly into place) and replace the liquid detergent divider into the drawer. 7. Push the drawer back into place. 8. Run a rinse program without any laundry in the drum. 2. 3. 4. 5. 6.
12 SAMSUNG Washing Machine Owners Instructions

Page 13

Cleaning the debris filter
Clean the debris filter 2 or 3 times a year. 1. Remove the base cover from the front of the washing machine. 2. Unscrew emergency drain cap by turning left and drain off all the water. (see "Draining the washing machine in an emergency" on page 12.) 3. Unscrew the filter cap and take it out.
4. Wash any dirt or other material from the filter. Make sure the drain pump propeller behind the filter is not blocked. Replace the filter cap. 5. Replace the base cover.
Cleaning the water hose mesh filter
You should clean the water hose mesh filter once per year, or when you see the following error message on the display:
To do this: 1. Turn off the water source to the washing machine. 2. Unscrew the hose from the back of the washing machine. 3. With a pair of pliers, gently pull out the mesh filter from the end of the hose and rinse it under water until clean. Also clean the inside and outside of the threaded connector.

4. Push the filter back into place. 5. Screw the hose back onto the washing machine. 6. Turn on the faucet and make sure the connections are watertight.
SAMSUNG Washing Machine Owners Instructions 13

Page 14

Troubleshooting

Problems and solutions

The washing machine will not start
Make sure the door is firmly closed. Make sure the washing machine is plugged in. Make sure the water source faucet is turned on. Make sure to press the Start/Pause button. Make sure the water source faucet is turned on. Make sure the water source hose is not frozen. Make sure the water intake hose is not bent. Make sure the filter on the water intake hose is not clogged.
No water or insufficient water supply
Detergent remains in the detergent drawer after the wash program is complete
Make sure the washing machine is running with sufficient water pressure. Put the detergents in the inner parts of the detergent drawer(away from the outside edges). Make sure the washing machine is set on a level surface. If the surface is not level, adjust the washing machine feet to level the appliance (see page 3). Make sure that the shipping bolts are removed (see page 3). Make sure the washing machine is not touching any other object. Make sure the laundry load is balanced. Make sure the drain hose is not squashed or bent. Make sure the water hose mesh filter is not clogged (see page 13). 1. Disconnect the power plug from the power supply. 2. Remove the water from the washing machine. 3. Use a screwdriver to pop off the plastic base cover. Set it aside. 4. Locate the orange plastic tab and pull forward to open the door.
Washing machine vibrates or is too noisy
The washing machine does not drain and/or spin
The Door Open button does not work
Understanding error messages

Error displayed Solution

Close the door. Make sure the source water faucet is turned on. Check the water pressure. Clean the debris filter. Make sure the drainage hose is installed correctly. Laundry load is unbalanced; loosen any tangled laundry. If only one item of clothing needs washing, such as a bathrobe or jeans, the final spin result might be unsatisfactory and an "E4" error message will be shown in the display window. Before contacting After-Sales service: 1. Try to remedy the problem (See "Troubleshooting" on this page). 2. Restart the programme to see if the fault is repeated. 3. If the malfunction persists, call After-sales service and specify.
14 SAMSUNG Washing Machine Owners Instructions

Page 15

Programme Chart

DETERGENT

PROGRAM
Max AND ADDITIVES Temperature Spin Speed(MAX)rpm (MAX) load C (kg) Pre wash Sof P14 P12 P10 P8

wash tener

Delay start

Function Pre wash

Water (l)

Electricity (kWh)

Cotton

Synthetic

Delicate
PROGRAM Cotton Synthetic Delicate Wool Quick Eco
Type of WASH Averagely or Lightly soiled cottons, bed linen, table line, underwear, towels, shirts, etc. Lighly or averagely soiled blouses, shirts, etc. Made of polyester(Diolen, Trevira), polyamide(perlon, Nylon) or similar blends. Delicate curtains, dresses, skirts, shirts and blouses. Only machine washable woolens with pure new wool label. Lightly soiled cottons or linen blouses, shirts, dark coloured terry cloth, coloured linen articles, jeans, etc. Lightly soiled cottons or linen blouses, shirts, dark coloured terry cloth, coloured linen articles, jeans, etc.
1. Programme with prewash lasts approx. 15 minutes longer. 2. The programme duration data has been measured under the conditions specified in Standard IEC 456. 3. Consumption in individual homes may differ from the values given in the table due to variations in the pressure and temperature of the water supply, the load and the type of laundry.
SAMSUNG Washing Machine Owners Instructions 15

Page 16

Appendix

Fabric care chart

Resistant material Delicate fabric Item may be washed at 95 C Item may be washed at 60 C Item may be washed at 40 C Item may be washed at 30 C Item may be hand washed Dry flat Dry clean only Can be hung to dry Can be bleached in cold water Dry on clothes hanger Do not bleach Tumble dry, normal heat Can be ironed at 200 C max Tumble dry, reduced heat Do not tumble dry Can be ironed at 100 C max Do not iron Can be dry cleaned using any solvent Dry clean with perchloride, lighter fuel, pure alcohol or R113 only Dry clean with aviation fuel, pure alcohol or R113 only Do not dry clean
Can be ironed at 150 C max

Electrical warnings

To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind: Operate the appliance only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appliance dealer or local power company. Use only a grounded or polarized outlet. For your safety, this appliance is equipped with a polarized alternating current line plug having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still doesn't fit, contact your electrician to replace your outlet. Protect the power cord. Power supply cords should be routed so that they are unlikely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.

16 SAMSUNG Washing Machine Owners Instructions

Page 17

Protecting the environment
This appliance is manufactured from recyclable materials, If you decide to dispose of this appliance, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the door so that animals and small children cannot get trapped inside the appliance. Do not exceed the detergent quantities recommended in the detergent manufacturers' instructions. Use stain removal products and bleaches before the wash cycle only when strictly necessary. Save water and electricity by only washing full loads (the exact amount depends upon the program used).
Declaration of conformity
This appliance complies with European safety standards, EC directive 93/68 and EN Standard 60335.

Specification

TYPE DIMENSION WATER PRESSURE WEIGHT WASH and SPIN CAPACITY WASHING WASHING AND POWER CONSUMPTION HEATING SPIN 220V 240V PUMPING WATER VOLUME SPIN REVOLUTION PACKAGE Wt MODEL rpm PAPER PLASTIC FRONT LOADING WASHER W598mm D550mm H844mm 50 kPa ~ 800kPa 75kg 5.0kg (DRY LAUNDRY) 220V 240V 220V 240V 550W 550W 550W 550W 34W 54l (STANDARD COURSE) SWF-P14 SWF-P12 SWF-P2.6kg 0.9kg
SAMSUNG Washing Machine Owners Instructions 17
180W 180W 2000W 2300W 500W 500W 430W 430W
MODEL SWF-P14 SWF-P12 SWF-P10 SWF-P8

SWF-P8 800

Page 18
IN CASE THE NEED FOR SERVICING ARISES
-Don't hesitate to call any AS center nearby with your name, address and telephone number when anything wrong with your product occurs.

Code No.: DC68-00411A-Dw

English/XSA/YMI

doc1

WASHING MACHINE

SWV-1200F/1100F/1000F/800F P1291/P1091/P8091/P6091

SERVICE

Manual

CONTENTS

1. SPECIFICATIONS 2. OVERVIEW OF THE WASHING MACHINE 3. OVERVIEW OF THE CONTROL PANEL 4. PROCESS TABLE 5. GENERAL REEOR FUNCTION 6. TROUBLE DIAGNOSIS 7. TEST MODE 8. DESIGNATION OF MAIN COMPONENTS 9. PCB SHEMATIC DIAGRAM PCB CIRCUIT DIAGRAM PCB PATTERN DIAGRAM WIRING DIAGRAM 10.ASSEMBLE AND DISASSEMBLE 11.TOOLS FOR DISASSEMBLY AND ASSEMLY 12.EXPOLDED VIEW AND PARTS LIST
! Caution for the safety during servicing
1. Do not allow the customer to repair the product. The person may be injured or the product life may be shortened. 2. Execute A/S after unplugging the power supply unit. Be care of the electric shock. 3. Do not plug several plugs in the same outlet. It may cause the fire due to overheat. 4. Check the damage, pressing or burning of the power plug or outlet. Replace it promptly if it has problem.(It may cause the electric shock or fire) 5. Do not clean the main body with the water. It may cause the electric shock and fire and shorten the product life) 6. The wiring of the harness shall be free from the moisture and tightened during serving. It shall not be deviated by certain impact. 7. Remove any dust or filth on the housing section,wiring section,connection section during servicing. Protect the cause of the fire such as the tracking,shortage and etc. 8. Check any mark of the moisture on the electrical parts, harness section and etc. Replace the parts or remove the moisture. 9. Check the assembly status of the parts after servicing. Maintain the status before servicing. 10. Pull out the power cord with holding the plug. Be care of the electric shock and fire when the cord is damaged. 11. Unplug the power plug from the outlet when the wash machine is not used. Be care of the electric shock and fire due to the strike of the lightening. 12. Do not use or store the spray or flammable materials(including gasoline,alcohol and etc.) around the wash machine. Be care of the explosion or fire due to the electric spark. 13. Do not put the bowl of water or wet laundry on the wash machine. If the water is penetrated to the wash machine, this may cause the electric shock or fire. 14. Do not install the wash machine in the place where the snow or rain falls. It may cause the electric shock and fire and shorten the product life. 15. Do not push the control buttons with the awl,pin, or sharp materials. It may the electric shock and trouble. 16. Check the wash machine is leveled horizontally and installed properly on the floor. The vibration may shorten the product life. 17. Joint the wire by the connector correctly. When the wire is jointed by the tape, this may cause the fire due to the tracking. 18. When the wash machine is to be laid for the service, put the pad on the floor and lay the product at side slowly. If the wash machine is laid front, the relay may be damaged by the tub. 19. When the wash-heater is replaced, check it is inserted in the bracket-heater and screw the nut. If the wash-heater is not inserted in the bracket-heater properly, this may cause the noise and leakage since it is contacted to the drum.
SAMSUNG ELECTRONICS CO., LTD

1. Specifications

WASH TYPE DIMENSION GROSS NET WATER PRESSURE WEIGHT GROSS NET WASHand SPIN CAPACITY POWER CONSUMPTION WASHING FRONT LOADING TYPE W 669mm X D 656mm X H 910mm W 598mm X D 550mm X H 844mm 50 kPa ~ 800 kPa 80 kg 75 kg 5.0 kg (DRY LAUNDRY) 220 V 240 V WASHING and HEATING MODEL SPIN 220 V 240 V PUMPING WATER CONSUMPTION SPIN REVOLUTION MODEL rpm PPW 380 W 220 V 240 V 180 W 180 W 2000 W 2400 W

SWV-800F/P8091 SWV-1000F/P1091 SWV-1100F SWV-1200F/PW 430 W 500 W 500 W 34 W 54l(STANDARD COURSE) SWV-800F/P8091 SWV-1000F/P1091 SWV-1100F SWV-1200F/PW 550 W 550 W 550 W
2. Overview of the Washing Machine
CONTROL-PANEL ASSY DOOR DRAWER

WATER SUPPLY VALVE

SENSOR PRESSURE
ADJUSTABLE LEG ASSY PUMP HOSE DRAIN(OPTION) CAP DRAIN(OPTION)
POWER CORD BUFFER SPRING WEIGHT-BALANCE

DRAIN HOSE

PULLEY BELT ASSY MOTOR SHOCK ABSORBER
3. Overview of the control panel
SWV-1200F/1100F/1000F, P1291/1091

SWV-800F/P8091

1. Detergent dispenser 2. Display panel Displays the remaining wash cycle time, error messages and cancel. 3. Temperature selection button Press the button repeatedly to cycle through the available water temperature options (cold water, 30C, 40C, 60C and 95C). 4. Spin selection button Press the button repeatedly to cycle through the available spin speed options SWV-1200F/P1291 : (No spin, Rinse hold, 400, 600, 800, 1000and 1200rpms), SWV-1100F : (No spin, Rinse hold, 400, 600, 800, 1000and 1100rpms), SWV-1000F/P1091 : (No spin, Rinse hold, 400, 600, 800, and 1000rpms), 5. Delay Start button(OPTION) Press the button repeatedly to cycle through the available delayed start options (from 1 hour to 24 hours in one hour increments).
6. Course button Press the button repeatedly to select available wash programs 7. Manual button Press the button repeatedly to cycle through the available partial wash options [Wash+Rinse+Spin Prewash+Wash+SpinSpinRinse(1 time)+Spin Rinse(2 times)+SpinRinse(3 times)+Spin] in case P6091 [Wash+Rinse+Spin Prewash+Wash+SpinSpinRinse(3 times)+Spin] Note : Prewash is only available when washing cotton, synthetic or delicate. 8. Start/Pause button Press to pause and restart programs. 9. Door Open button(OPTION) Press to open the washing machine door. 10. O (On/Off) button Press once to turn the washing machine on, press again to turn the washing machine off. If the washing machine power is left on for longer than 10minutes without any buttons being touched, the power automatically turns off. 11. No Spin button(OPTION) Press to no spin program. 12. Rinse Hold button(OPTION) Press to rinse hold program.
5. General Error Function
When an error occurs, this function starts to keep generating error melody sounds and displays error indicators as shown in the followings per corresponding error by blinking in 0.5sec interval until the error status is completely cleared out. In this case, all the driving devices are turned off until the error is cleared out. 1. WATER SUPPLY ERROR - Water Supply Error occurs when water level frequency does not show changes more than 50Hz or water is not supplied up to the water level presetting for 20 min or more at the time of initial water supply, the error status can be cleared by turning POWER S/W OFF and resuming the POWER ON initial status. - Display shows E1. 2. WATER DRAIN ERROR - In case the water level frequency is 25.3KHz or less in the initial phase of UNB-detecting cycle. - Water Drain error can be cleared by turning POWER S/W OFF and resuming the POWER ON initial status. - Display shows E2. 3. OVER-FLOW ERROR - Over-Flow error occurs when the water level is in abnormal operation (OVER-FLOW: 22.40KHz/50 or more). It can be cleared by turning POWER S/W OFF. Water is drained prior to POWER S/W OFF and it is forced to be drained for 2 min if a frequency of more than 25.24 KHz is detected. - Display shows E3. 4. DOOR OPEN ERROR - Door Open error can be cleared by closing the door. - Display shows dE. 5. UNBALANCE ERROR - Unbalance error is cleared by POWER S/W OFF and by resuming the POWER ON initial status. - Display shows E4. 6. WATER HEATER ERROR - In case the water temperature varies by 40C or more in 5 min, or by 2C or less in 10 min after heating is started. - It can be cleared by turning POWER S/W OFF. - Display shows E5,E6. 7. ASSY PRESSURE S/W ERROR * Generated Frequency Signal of WATER LEVEL(W/L) S/W (KHz) Lvevl Abnormal W/L Frequency Low Level 30.00 KHz High Level 15.00 KHz

- If the same signal as the above table is detected for more than 5 seconds, it is a PRESSURE S/W Error. - When the error occurs, perform the time-drain for 3 min and then turn off the water drain pump. Then the display shows E7 as a pressure s/w error indicator. 8. ABNORMAL WATER TEMPERATURE ERROR Course Synthetic Delicate Wool Water Temp 60C or more 45C or more 45C or more
- In case the water temperature is 60C or more in the synthetic course, 50C or more in the delicate course, and 40C or more in the wool course. - At the time of initial water supply, if the water temperature is not appropriate, water starts to be drained and it is forced to be drained for 2 min when the abnormal frequency of 25.24KHz is detected. - Display shows E8. - This error can be cleared by POWER S/W OFF. SAMSUNG ELECTRONICS CO., LTD 7
10. Assemble and Disassemble
1. ASSY-COVER TOP 1) Remove two screws fixing the top-cover on back side. 2) Push the top-cover back about 15mm and pull it up. 3) Its possible to exchange and service the trans former, the pressure-senser, the noise-filter and the water valve.
2. FRAME FRONT 1) Remove the top-cover and the assy drawer. 2) Remove two screws fixing the control-panel on front side and the screw on right side. 3) Remove the cover-front(L) by using the (-)driver. 4) Pull the lever and open the assy-door. 5) Part the diaphragm and the wire diaphragm away from the frame-front. 6) Remove the eight screws fixing the frame-front. 7) Its possible to exchange and service the heater, the pump, the shock-absorber and the door lock s/w.
3. BELT 1) Remove the top-cover. 2) Disassemble and assemble the belt. 3) Check the belt is located at center of the motor-pulley. <When assemble the belt> Hook the belt on the motor pulley 1) and place it around the pulley 2).

BELT 2

PULLEY
4. MOTOR 1) Lay down the washer on left side. 2) Remove the wire housing from the motor. 3) Remove the bolt fixing the motor with the box drive on back side. 4) Remove the motor.

Motor Assemble Hole

5. How to Assemble the RELAY Housing. <CAUTION> Insert the Relay Housing to the Relays on the opposite direation each other.

RELAY Housing

Heat Sink
11. Tools for Disassembly and Assembly
NO 1 TOOL Box driver 10mm 13mm 17mm 19mm 2 Double-ended spanner 10, 13 17, 19mm Heater (1) Motor (1), Balance (5) 2 holes of each left and right of the shock absorber 1 Pulley hole Replaceable for the box driver. Since the bolt runs idle when the box driver is used, use the box driver 17mm. 5 Vice pliers Other(Driver, Nipper, Long nose) JIG for the Tub Tool to protect the idle and abrasion of the bolt for the box driver. General tools for the after service. 1 (Disassemble and Assemble)

6. Trouble Diagnosis

As the micom wash machine is configured of the complicate structure, there might be the service call. Below information is prepared for exact trouble diagnosis and suitable repair guide.
Caution for the Repair and Replacement
Please follow below instruction for the trouble diagnosis and parts replacement. 1) As some electronic components are damaged by the charged static electricity from the resin part of wash machine or the human body, prepare the human body earth or remove the potential difference of the human body and wash machine by contacting the power supply plug when the work contacting to PCB is executed.

POWER SUPPLY PLUG

2) Since AC220~240V is applied to the triac T1 and T2 on P.C.B, the electric shock may occur by touching and be careful that the strong and weak electricity are mixed. 3) If the P.C.B assembly is out of order, do not replace the component on P.C.B except TACT switch since the component is coated by the urethane. 4) As the P.C.B assembly is designed for no trouble, do not replace the P.C.B assembly by the wrong diagnosis and follow the procedure of the trouble diagnosis when the micom is not operated normally. 5) As the parts on P.C.B are coated by the urethane, they can not be tested by the test bar of the meter. Check the trouble by the test mode method according to the procedure.
The power is not supplied

Cause and treatment

- Is the PCB connector connected well? - Is the voltage normal? - Is the power supply plug connected well? - Is the noise filter connected well? - Is the secondary output of the power supply transformation normal? - Is the fuse disconnected? If above points are not found, the PCB assembly is out of order. Replace it. - Is the knob open? - Did you push START/PAUSE button after selecting the course? - Is the water supply valve connected well? - Is the winding of the water supply valve continuous? - Is the connection and operation of the pressure switch normal? If above points are not found, the PCB assembly is out of order. Replace it. - Is the connection and operation of the pressure switch normal? - Is the pressure switch hose damaged so that the air is leaked? - Is the pressure switch hose bent? - Check the operation of the water level switch. If above points are not found, the PCB assembly is out of order. Replace it. - The PCB assembly is out of order. Replace it. - Is the belt connected well? - Is the winding of the motor continuous? (Rotor winding, stator winding, generator) - Is the motor fuse normal? If above points are not found, the PCB assembly is out of order. Replace it. - The PCB assembly is out of order. Replace it. (Inversion relay open trouble) - Is the drainage hose bent? - Is the winding of the drainage pump continuous? - Is the drain filter clogged by the waste? If above points are not found, the PCB assembly is out of order. Replace it. - The unbalance is detected. - Put in the laundry uniformly and start again. - Is the pulley nut loosen? - Is the transport safety device removed? - Is the product installed on the level and stable place? (Little noise may be generated during the high-speed SPIN.) <When the leak breaker and current breaker is installed separately> - When the leak breaker is down, check and make the earth of the outlet. - When the current is down, the current is leaked. <Is the breaker down when the leak/current breaker is combined?> - Check the rated capacity of the current and leak breaker. The current breaker may be down due to the lack of the current when the wash machine and other apparatus are used. In this case, execute the cold water wash to check whether the current capacity is lack. - Is the wash heater terminal unplugged? - Is the wash heater normal?(Resistance value : 20.5~21.5) - If above points are not found, the PCB assembly is out of order. Replace it.

The water is not supplied.
The wash does not start though the water supply is stopped.
The wash is executed while the water is supplied. The drum does not rotate during washing.
The drum rotates by one direction during washing. (The drum rotates to one direction for SPIN.) Drainage problem.
Dehydration problem. Abnormal noise during SPIN.
Leak breaker or current/leak breaker is down during washing.
The heating is not executed.

7. Test Mode

1. Driving Compartment Test Mode A. Hold down 2 and 1 keys simultaneously and then press O(POWER S/W) on. (Display shows tE) Hold down 1 and 2 keys simultanesously (each processing for 0.3sec) and then press O(POWER S/W) on. B. The driving compartment can be tested when you press 3 key right after entering into the intial stage of the TEST MODE. s Driving Compartment Test Pre-wash VALVE ON(0.3sec) OFF(0.3sec) Main wash(0.3sec) OFF(0.3sec) Rinse VALVE ON(0.3sec) OFF(0.3sec) Pump MOTOR ON(0.3sec) OFF(0.3sec) MOTOR RELAY1 ON(0.3sec) OFF(0.3sec) MOTOR RELAY2(0.3sec) OFF(0.3sec) MOTOR RELAY2 ON(0.3sec) OFF(0.3sec) HEATER RELAY ON(0.3sec) OFF(0.3sec) DOOR OPEN (Function continues when door is closed)
8. Designation of Main Components
8-1 Normal / Reverse Revolution of Motor and R. P. M. Control

HIGH-SPEED TACHO

MIDDLE-SPEED

Stator coil

PROTECTOR (150 C)

STATOR

5 WASHING MOTOR

<Figure3>

<Figure1>

<Figure2>

STATOR(5.10) STATOR(5.1) ROTOR(8.9) TACHO(3.4) PROTECTOR(6.7) H(mm) Code-No Resistance value 1.64 0.91 1.9 42.52 DC31-10181A 2.07 0.90 2.35 42.45 DC31-00002C Rated value 220~240V / 50Hz

Remark A B

8-2 Door safety Device

Solenoid

220/240V ED 1.0% KB 1s SD 100s 12A 125~250V AC
220/240V ED 1.0% KB 1s SD 100s
SOLENOID Coil Resistance 210 10% DC61-00122A

DC61-00115A

8-3 Heater
1) Capacity : AC 230V/2000W 2) Location : Bottom of TUB 3) Function : Raise the water temperature supplied at the wash process. 4) Resistance value : 23 ~ 29 5) Thermo Fuse : 128C SAMSUNG ELECTRONICS CO., LTD

Thermistor

8-4 ASSY-TUB
INNER-BEARING OUT-BEARING

OIL-SEAL

(unit : mm) TYPE INNER-BEARING(A) OUT-BEARING(B) OIL-SEAL(C) I II 43.9 24.3 CODE-NO REMARK
DC97-00214A SPIN SPEED OVER 1000rpm DC97-00214B SPIN SPEED BELOW 800rpm

8-5 ASSY- FLANGE SHAFT

(unit : mm) TYPE I II (A) (B) (C) 44.CODE-NO REMARK
DC97-00216A SPIN SPEED OVER 1000rpm DC97-00214A SPIN SPEED BELOW 800rpm
12. Expolded View and Parts List

Code No

DC47-00001A DC61-30346A DC61-40348B DC61-40344A DC61-60496A DC60-20061C DC62-20311A DC60-60188A DC60-20061C DC91-12281A DC97-00785A DC97-00785B DC62-40183A DC61-30347A DC61-30347B DC61-30347C DC61-60499B DC61-60520A DC97-00214A DC97-00214A

Description

HEATER TUB-FRONT BRACKET-NUT BRACKET-HEATER SPACER-HEATER SCREW TAPPING VANE-CHECK WASHER-PLAIN SCREW TAPPING ASSY-DRUM ASSY-DRUM ASSY-DRUM PACKING-TUB TUB-BACK TUB-BACK TUB-BACK CLIP-TUB CLIP-TUB ASSY-FLANGE SHAFT ASSY-FLANGE SHAFT

Specification

230V,2000W,230V,2000W,P6091 FRPP(GR30%),IVORY,SWF-P12 SBHG-R,T3,P1291,NO-PAINT STS430,T1,SWF-P12,PBT,SWF-P12,TH,+,2,D4,L12,STS304,EPDM,BLK,SWF-P12,-,ID4.5,OD15.5,T1,SWF-P12,STS3 TH,+,2,D4,L12,STS304,P1091 SWF-P8/P6091 P1291 EPDM,BLK,SWF-P12 SWF-P12 SWF-P12V SWF-P6V HSWR,P1291,NO/PAINT SK5,SWF-P12,PLATE-TYPE P1291/P1091, ALDC+SM45C P8091/P6091, ALDC+SM45C

Remark

15 15-1
See on page12 See on page12
NO Code No Q'ty Description
DC91-12078A DC61-20219A DC91-12077A DC60-40138A DC60-60044B DC60-60040A DC66-60154A DC61-60497A DC62-10305A DC60-40140A DC60-40132B DC62-10303A DC66-60153A DC62-40184A DC61-10676A DC60-20014A DC61-60497A DC62-10304A DC65-60118F DC66-10176B DC60-60049A DC60-50014A DC66-10139B DC31-10181A 1 ASSY-WIRE DIAPHRAGM DOOR-DIAPHRAGM ASSY-CLAMP DIAPHGRAM BOLT-W.MOTOR WASHER-PLAIN WASHER-NYLON WEIGHT-BALANCER CLAMP-HOSE HOSE-DRAWER TUB BOLT-HEX BOLT-FLANGE HOSE-AIR WEIGHT-BALANCER PACKING-TRAP CAP-TRAP SCREW TAPPING CLAMP-HOSE HOSE-FILTER TUB BAND RING PULLEY WASHER-SPRING NUT-HEX BELT-TRANSMISSION MOTOR-DRUM MOTOR-DRUM CUSHION-MOTOR BOLT-W.MOTOR
SWF-P12,EPDM,GRY,SWF-P12 SWF-P12,SM10C,HEX,M8,L62,-,ZPC2(YEL),-,SBC,ID8.4,OD30,T3,-,-,-,ID10.5,OD32,T2,-,PBSP-1/2H CONCRETE,SWF-P12,LOWER HSWR,SWF-P12,ID70/OD75.8(TUB) EPDM,ID35,BLK,L158,SWF-P12/OD4 WEIGHT-UL/SM10C,HEX,M8,L147,-,ZPC2(YEL) M8,L210,ZPC2(YEL),SS41C EPDM,ID24,BLK,L130,SWF-P12/OD4 CONCRETE,SWF-P12,UPPER EPDM,BLK,SWF-P12(T3) PP(TB53),-,SWF-P12 TH,-,2,D4,L12,ZPC2,HSWR,SWF-P12,ID70/OD75.8(TUB) EPDM,ID65,BLK,L151,SWF-P12/OD7 PW1,YEL,-,PI/33 ALDC,-,D297,P1291,ID12.5 -,ID10.5,OD18,T2.5,-,SIR HEXAGON,M(12),ZPC2(YEL),SM10C, -,-,-,-,MCC 52/64 148/SEC1,220~240V,50HZ,52MM MCC 45/64 148/SEC1,220~240V,50HZ,45MM BUTYL,SWF-6V,ID16/OD20 SM10C,HEX,M8,L62,-,ZPC2(YEL),-,-

NSA Remark

See on page11 See on page11
27-1 DC31-00002C DC61-00041A DC60-40138A

NO Code No

1 1-1 1-2-12-13-16-21-40-1 40-DC96-00070A DC96-00070B DC96-00052B DC96-00053A DC96-00053B DC60-20136A DC61-30344A DC32-30006P DC61-60063B DC62-10311A DC60-20050C DC60-20054C DC60-30015B DC97-00851A DC97-00218A DC61-30345A DC61-00056A DC60-20054C DC60-20030A DC61-00115A DC61-00122A DC66-30160A DC61-70216C DC61-60180A DC61-70217C DC62-30313A DC62-30314A DC61-60063B DC62-10068A 6001-000947 DC29-00003A DC29-90001A DC60-20138A DC96-00146A DC61-40081A DC97-00139B DC65-60118F DC99-00033A DC99-00040A DC91-12292A DC66-60149A DC60-40026A DC61-10672A DC61-10673A DC62-10302A DC90-11110K DC96-00149A DC96-00035J 6002-000444

Q'ty Description

0.2 ASSY-M.WIRE HARNESS ASSY-M.WIRE HARNESS ASSY-M.WIRE HARNESS ASSY-WIRE HARNESS ASSY-WIRE HARNESS SCREW TAPPING FRAME-PLATE(U) SENSOR PRESSURE CLAMP-HOSE HOSE-PRESSURE SCREW TAPPING SCREW TAPPING SCREW-SPECIAL ASSY-COVER TOP ASSY-COVER TOP FRAME-FRONT FRAME-FRONT SCREW TAPPING SCREW TAPPING DOOR-LOCK S/W DOOR-LOCK S/W LEVER SPRING-HANGER SLEEVE-PLUG SPRING-HANGER VALVE-WATER VALVE-WATER CLAMP-HOSE HOSE-DRAWER SCREW-MACHINE FILTER-EMI FILTER-EMI SCREW TAPPING ASSY-POWER CORD HOLDER-WIRE ASSY-HOSE DRAIN(O) BAND RING PAINT PAINT ASSY-LEG DAMPER-SHOCK BOLT-HEX COVER-FRONT(L) CAP-DRAIN HOSE-DRAIN ASSY-PUMP DRAIN ASSY-PUMP DRAIN ASSY-PUMP DRAIN SCREW-TAPPING
P1291/1191/1091/8091,COLD+HOT P1291/1191/1091/8091,COLD-ONLY P6091,COLD-ONLY P1291/1191/1091(SUB),HIGH-RPM P8091/P6091,(SUB),LOW-RPM TH,+,2,D5,20,ZPC3,COVER-TOP EGI,NTR,SWF-P12 DN-S14,TERMINAL-TYPE(DC5V) SK5,-,YEL EPDM,ID13.5,BLK,-,SWF-P12/OD17 -,-,2S,D3,L8,FZY,TH,+,1,D4,L12,FE FZY,FLANGE,PH,+,D4,L12,ZnFe(YEL),SWF-P12, WOOD TYPE STEEL TYPE EGI,WHT,SWF-P12 EGI,WHT,P6091 TH,+,1,D4,L12,FE FZY,FH,-,1,D4,L12,NTR,230V/50HZ,GRY,250V(16A) P6091 PE,L335,SWF-P12(ORG) HSWR,OD24,-,-,-,-,P1291,LEFT(RED/SPRAY) NYLON#6,SEW-720DR,NTR HSWR,OD30,-,-,-,-,P1291,RIGHT(NO-PAINT) NYLON#6,SWF-P12,EATON(COLD) NYLON#6,SWF-P12,EATON(COLD+HOT) SK5,-,YEL SOFT-PVC,ID10,NTR,L350,TH,+,M4,L10,NTR/WHT,STS304 FA-2151TS-1,250V,15A,2200PF,P1291,-25/+85'C AC LINE:FA-215T2-D PH,TORX,1,D4,L12,ZPC2,P1291~P6091,250V/16A(PV) NYLON66,-,DAWH-3NB,NTR(PI15) SWF-P12V,PP(BB110)2200 PW1,YEL,-,PI/33 SBHG1-A,WHT,P1291(COLD) P6091,COLD SWF-P12,-,SWF-P12,80N M10,-,-,SCP PP(BJ-730),WHT,SWF-P12 PP(TB53),WHT,SWF-P12 EPDM,ID5.5,BLK,L220,OD9.5 P1291/P1091, 220V~240V/50Hz P8091/P6091, 220V~240V/50Hz 220V~240V/60Hz TN,+,2S,M4,L14,NTR,STS304

DC64-20013A DC64-20013B

DECORATION-LID DECORATION-LID COVER-DOOR COVER-DOOR DOOR-GLASS HOLDER-GLASS HOLDER-GLASS SCREW TAPPING ASSY-HINGE SCREW MACHINE LEVER-DOOR LEVER-DOOR SCREW TAPPING NUT-FLANGE
ABS,SIL/COATING,SWF-P12,SWF-P10 / P8,ABS,WHT,SWF-P12 ABS,WHT,P6091 GLASS,NTR,SWF-P12 ABS,WHT,SWF-P12,ABS,WHT,P6091 TH,+,2,D4,L8,FE,FZY SWF-P12,NI+CR RH,+,M5,L12,STS430,SEAL-LOCK ZnDC,L40,SWF-P12 P6091 FH,+,1,D4,L20,STS304,-,-,-,M5XP0.8,FZY,MSWR10,-

2 2-4 4-9 9-11

DC61-10682A DC61-00055A DC61-00013A DC61-40346A DC61-00057A DC60-20060A DC97-00100A DC60-10019B DC66-30161A DC66-00016A DC60-20140B DD60-50018A
2 DC97-00004G DC97-00004M DC97-00004N DC97-00004P DC61-30348A DC61-60498A DC61-10687A DC97-00003M DC97-00003S DC97-00703N DC97-00003T DC97-00703P DC97-00003U DC97-00003V 6002-000445 MF-P1291-00 MF-P1191-00 MF-P1091-00 DC96-00135A MF-P6091-00 6002-000554 DC91-12084A DC61-10679A

 

Tags

DVT-6300 ER-430 MCD288E 12 MDX-C5970R Chartplotter VKC902HT CS-E9ekeb HT-BD2t XAA Wagon Array TS-450S AF400FTZ QC5010 SF-565PR XIP FAX-phone 11 SC-DX200 Satellite A60 Stylus R260 Digimax A400 40000102 XV-N316S RD-7106 DSC-P72 HDC-SD707 DXZ765MP Challenger Miss BC-137 LE40C630 ZDM6814 Optio T20 LM500 Reference Card DCT6412 Voice Laserjet 3030 KX-T7431 Projector Driver Pack VME575LE CE117A VPC-FH1 FMH 6150 Celia DNX7340BT UE32C6540SW ESA3056 400 AE DX36M TX-DS838 Gr-dvx507 BMW R45 CDM7025C 2LB 33 Review WD-14331ADK UN32C5000 Dvcr-B200 P2700 MPK-THH MX153 DS6321-3 MT-50PM10 Lexmark X85 Cect I68 MRO-DV100 KDL-40D3550 Samsung 245T KAC-6201 EL-6900 Gigmaker Stagepas300 Blackberry 8803 9-3 2001 SA-ST1 P-120-P-120S EMS2390 P4AL-800 FEX800 5 SDK B D TI-5032SV Xprime 3 Single Beam Emx5000-12 DA-302 LD220Z IC-M88 Array ZBX 7 Eyes PRO Yamaha REV7 F5D7230 CLX-3175N SEE AVR-1601 9500N FTX35GV1B HR902TA Minolta 2060 EH777501E L246WH-BN Microfiche

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101