SyncMaster 2333TN/2333T

LCD Monitor

User Manual

The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.

Table Of Contents

MAJOR SAFETY PRECAUTIONS
Before You Start. 1-1 Custody and Maintenance. 1-2 Safety Precautions. 1-3

INSTALLING THE PRODUCT

Package Contents. 2-1 Installing the Stand. 2-2 Removing the Stand. 2-3 Installing the Stand for the Wall Mount. 2-4 Connecting with a PC. 2-5 Kensington Lock. 2-6

USING THE PRODUCT

Setting the Optimal Resolution. 3-1 Standard Signal Mode Table. 3-2 Installing the Device Driver. 3-3 Product Operating Buttons. 3-4 Using the Screen Adjustment Menu (OSD: On Screen Display). 3-5

INSTALLING THE SOFTWARE

Natural Color. 4-1 MagicTune. 4-2 MultiScreen. 4-3

TROUBLESHOOTING

Monitor Self-Diagnosis. 5-1 Before Requesting Service. 5-2 FAQ. 5-3

MORE INFORMATION

Specifications. 6-1 Power Saving Function. 6-2 Contact SAMSUNG WORLDWIDE. 6-3 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only. 6-4

Major Safety Precautions

Before You Start
Icons used in this manual
ICON NAME Caution MEANING Indicates cases where the function may not work or the setting may be canceled.
Indicates a hint or tip to operate a function.

Using this Manual

Make yourself fully aware of the safety precautions before using this product. If a problem occurs, refer to the 'Troubleshooting' section.

Copyright Notice

The contents of this manual are subject to change without prior notice for performance improvement.
Copyright 2010 Samsung Electronics Co., Ltd. All Rights Reserved. The copyright of this manual is reserved by Samsung Electronics, Co., Ltd. The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written permission of Samsung Electronics, Co., Ltd. The SAMSUNG logo and SyncMaster are the registered trademarks of Samsung Electronics, Co., Ltd. Microsoft, Windows and Windows NT are the registered trademarks of Microsoft Corporation. VESA, DPM and DDC are the registered trademarks of the Video Electronics Standard Association.
The ENERGY STAR logo is the registered trademark of the U.S. Environmental Protection Agency. All other trademarks mentioned herein belong to their respective companies.

Custody and Maintenance

External Surface and Screen Maintenance Clean the product with a soft dry cloth. Do not clean the product with a flammable substance such as benzene or thinner, or clean with a wet cloth. This can cause a problem with the product.
Do not scratch the screen with your fingernails or a sharp object. This can cause permanent scratches and damage to the product. Do not clean the product by spraying water directly onto the product. If water enters the product, it can cause fire, electric shock, or a problem with the product. Do not use a supersonic humidifer near the monitor. A supersonic humidifier can cause a white stain to appear on the high-gloss portions of the product due to the inherent characteristics of the high golss material. The appearance and the color may differ depending on the model.
Securing the Installation Space Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature. Install the product so the required distances shown in the figure are kept. The appearance may differ depending on the product. When installing the product with a stand When installing the product with a wall-mount

About persistent images Displaying a still image for a long time can create a persistent image or stain on the screen. If you intend to leave the display on, but will not use it for a long time, set the power-saving mode or a screen saver on to protect the screen.
Due to technological constraints of the LCD Panel manufacturer, the images generated by this product may appear either brighter or darker than normal by appr.1ppm (parts per million) pixel. The number of sub-pixels of an LCD panel by size: The number of Sub-Pixels = Max. Horizontal Resolution x Max. Vertical Resolution x 3 Example ) If the maximum resolution is 1680 x 1050, the number of sub-pixels is 1680 x 1050 x 3 = 5,292,000.

Safety Precautions

Icons used for safety precautions
ICON NAME Warning MEANING Failing to follow the precautions marked with this sign, may result in a serious injury or even a fatality. Failing to follow the precautions marked with this sign, may result in a personal injury or property damage.

Caution

Meaning of Signs
Do not perform. Must be followed.

Do not disassemble.

The power plug must be unplugged from the wall outlet.

Do not touch.

Must be grounded to prevent electric shock.

Power Related

The product image used in the following pictures for your reference may look different from the actual product.

Warning

Avoid using a damaged power cord or plug or a loose power outlet. Otherwise, it may result in electric shock or fire. Avoid connecting multiple electric appliances to a single wall outlet. Otherwise, it may result in fire due to overheating of the wall outlet.
Avoid plugging in or unplugging the power supply with wet hands. Otherwise, it may result in electric shock.
Plug the power plug in firmly. Otherwise, it may result in fire.
Make sure to connect the power cord to a grounded wall outlet (for insulation class 1 equipment only). Otherwise, it may result in electric shock or injury.
Avoid bending or twisting the power cord excessively and avoid placing heavy objects on the cord. Otherwise, it may result in electric shock or fire due to a damaged power cord.
Keep the power cord and the product away from a heater. Otherwise, it may result in electric shock or fire.
If the pins of the power plug or the wall outlet are covered in dust, clean it using a dry cloth. Otherwise, it may result in fire.
Avoid unplugging the power plug while the product is operating. Otherwise, it may damage the product due to electric shock. Make sure to use only the power cord supplied by our company. In addition, do not use the power cord of another electric appliance. Otherwise, it may result in electric shock or fire.

When unplugging the power plug from the wall outlet, make sure to hold it by the plug and not by the cord. Otherwise, it may result in electric shock or fire.
Connect the power plug to a wall outlet that can be easily reached. When a problem occurs with the product, you must unplug the power plug to cut the power off completely. You cannot cut the power off completely using only the power button on the product.

Installation Related

Avoid placing burning candles, mosquitorepellent or cigarettes on the product and installing the product near a heater. Otherwise, it may result in fire. Ask an installation engineer or relevant company to install the product onto the wall. Otherwise, it may result in injury. Make sure to use the specified wall mount.
Avoid installing the product in a badly-ventilated location such as inside a bookshelf or closet. Otherwise, it may result in fire due to internal over-heating.
Keep a distance of at least 10 cm from the wall when installing the product for ventilation. Otherwise, it may result in fire due to internal over-heating.
Keep the plastic bags used to pack the product away from children. If children place the plastic bags over their heads, they may suffocate.
Avoid installing the product in a location that is unstable or exposed to excessive vibrations such as on an unstable or slanted shelf. The product may fall and this may result in damage to the product or injury. If you use the product in a location exposed to excessive vibrations, it may result in a problem with the product or fire.
Avoid installing the product in a location exposed to dust, moisture (sauna), oil, smoke or water (rain drops) and installing it within a vehicle. This may result in electric shock or fire.
Avoid installing the product in a location exposed to direct sunlight and installing the product near a heat source such as a fire or heater. This may shorten the product life cycle or cause fire.
Avoid installing the product at an easily reachable height where children may reach it. If a child touches the product, the product may fall and this may result in injury. Since the front part is heavier, install the product on a flat and stable surface.
Do not let the product drop while moving it. This may result in a problem with the product or injury. Do not place the product face down on the floor. This may damage the panel of the product.
When installing the product on a console or shelf, make sure that the front of the product does not protrude out of the console or shelf. Otherwise, this may cause the product to fall off and result in a malfunction or injury. Make sure to use a cabinet or shelf suitable to the size of the product.

When putting the product down, handle it gently. Otherwise, it may result in a problem with the product or injury.
If the product is installed in a location where the operating conditions vary considerably, a serious quality problem may occur due to the surrounding environment. In this case, install the product only after consulting one of our service engineers about the matter. Places exposed to microscopic dust, chemicals, too high or low temperature, high humidity, such as airports or stations where the product is continuously used for a long time and so on.

Cleaning Related

Since using a surfactant, which contains a large amount of alcohol, solvent or other strong chemicals, may result in the discoloration or cracking of the product exterior or the panel surface coming off, be sure to use the recommended cleansing agent only. You can purchase the recommended cleansing agent from a service center. Before cleaning the product, unplug the power cord. Otherwise, it may result in electric shock or fire. When cleaning the product, do not spray water directly over the product parts. Make sure that water does not enter the product. Otherwise, it may result in fire, electric shock or a problem with the product.
Avoid spraying cleansing agent directly onto the product. This may result in discoloration or cracking of the exterior of the product or the panel coming off. When cleaning the product, disconnect the power cord and clean the product with a soft dry cloth. Avoid using chemicals such as wax, benzene, alcohol, thinner, mosquitorepellent, fragrance, lubrication or cleansing agent when cleaning the product. This may result in the exterior being deformed or the print being removed. Because the exterior of the product is easily scratched, be sure to use a proper cleansing cloth. However, if the cloth is contaminated by alien substances, it may result in scratches to the exterior; therefore shake off any alien substances from the cloth before using it.
Use a soft, cloth dampened with a "monitorexclusive cleansing agent" and wipe the product with it. If no monitor-exclusive cleansing agent is available, dilute a cleansing agent with water at a ratio of 1:10 before cleaning the product.

Usage Related

Since a high voltage runs through the product, never disassemble, repair or modify the product yourself. Otherwise, it may result in fire or electric shock. If the product needs to be fixed, contact a service center. When cleaning the product, do not spray water directly over the product parts. Make sure that water does not enter the product. Otherwise, it may result in fire, electric shock or a problem with the product.
If the product generates a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact a service center. Otherwise, it may result in electric shock or fire.

Avoid turning the product upside down or moving the product holding only the stand. This may cause the product to fall resulting in damage to the product or injury.
Watching the product from too close a distance continuously may damage your eyesight.
Avoid using a humidifier or cooker near the product. Otherwise, it may result in electric shock or fire.
It is important to give your eyes some rest (5 minutes every hour) when viewing the product screen for long periods of time. This will alleviate any eye strain.
Since the display panel is hot after being on for a long time, do not touch the product.
Keep small accessories away from the children.
Take care when adjusting the angle of the product or the height of the stand. If your hand or finger is caught, you may be injured. If the product is tilted excessively, the product may fall and this may result in injury.
Avoid placing a heavy object over the product. Otherwise, it may result in a problem with the product or injury.
Maintaining the Correct Posture when Using this Product
Maintain the correct posture when using this product. Straighten your back. Keep a distance of 45~50 cm from your eyes to the screen. Look down at the screen and face the screen forwards. Adjust the angle of the product so that light is not reflected onto the screen. Keep your elbow at a right angle and keep your arm level with the back of your hand. Keep your elbow at a right angle. Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or higher and maintain the position of your arm so that your arm is below your heart.

Installing the Product

Package Contents
Unpack the product and check if all of the following contents have been included. Store the packaging box in case you need to move the Product later. If any items are missing, contact your dealer. Contact a local dealer to purchase optional items.

Monitor CONTENTS

Installation Manual
Product Warranty (Not available in all locations)

D-Sub Cable

Power Cord

Cleaning Cloth

Cable Arrangement Link

OPTIONAL PARTS

DVI Cable
The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. The cleaning cloth is supplied with black high-glossy models only.

Installing the Stand

Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Place a soft cloth over the table to protect the product and place the product onto the cloth face down.

Standard Signal Mode Table
The LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent characteristics of the panel, unlike for a CDT monitor. Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on. Therefore, configure it as follows referring to the User Manual of the graphics card.
DISPLAY MODE VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1280 x 800 VESA, 1280 x 960 VESA, 1280 x 1024 VESA, 1440 x 900 VESA, 1600 x 1200 VESA, 1680 x 1050 VESA, 1920 x 1080
HORIZONTAL FREQUENCY (KHZ) 31.469 35.156 37.879 48.363 49.702 60.000 63.981 55.935 75.000 65.290 67.500
VERTICAL FREQUENCY (HZ) 59.940 56.250 60.317 60.004 59.810 60.000 60.020 59.887 60.000 59.954 60.000
PIXEL CLOCK (MHZ) 25.175 36.000 40.000 65.000 83.500 108.000 108.000 106.500 162.000 146.250 148.500
SYNC POLARITY (H/ V) -/+/+ +/+ -/-/+ +/+ +/+ -/+ +/+ -/+ +/+
Horizontal Frequency The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz. Vertical Frequency A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This frequency is called the vertical frequency. The vertical frequency is represented in Hz.
Installing the Device Driver
If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is included on the CD-ROM supplied with the product. If the supplied drive file is corrupted, please visit a service center or Samsung Electronics website(http://www.samsung.com/), and download the driver.
1. Insert the driver installation CD-ROM into the CD-ROM drive. 2. Click on "Windows Driver". 3. Complete the remaining installation steps according to the instructions displayed on the screen. 4. Select the model of your product from the model list.

5. Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information, refer to the document about the Windows operating system.
Product Operating Buttons
DESCRIPTION Press this button to view the On Screen Display (OSD). This button is also used to exit the OSD or to return to a higher-level OSD menu * OSD Adjustment Lock This function locks the OSD in order to maintain the current settings or to prevent the settings from being changed by another person On: If you press and hold the MENU button down for 5 seconds, the OSD Adjustment Lock function is activated. Off: If you press and hold the MENU button down for 5 seconds again, the OSD Adjustment Lock function is disabled. Even if the OSD Adjustment Lock function is activated, users can adjust the brightness and contrast and can set up the adjustment function assigned to the [ ].
Use these buttons to navigate the menu or to adjust a value in the OSD. Use this button to control the brightness of the screen. Users can set the <Customized Key> to one of the following functions. If the user presses the Customized Key[ ] after setting it, the configured function will be performed. <MagicBright> - <MagicColor> - <Color Effect> - <Image Size> You can set the function of the <Customized Key> by selecting <SETUP&RESET> -> <Customized Key> in the OSD. Use this button to select a function. If you press the [ ] button when there is no OSD, the input signal (Analog/Digital) is
switched. When the input signal is switched by pressing [ ] button or the product is turned on, a message displaying the selected input signal appears at the top left of the screen. To select Digital mode, you have to connect the product and the PC with the DVI cable. This function is not available for products with an Analog interface only.

ICON AUTO

DESCRIPTION Press [AUTO] button to adjust the screen settings automatically. This function is only available in Analog mode. If the resolution settings are changed in the Display Properties, the AUTO adjustment function is performed. Press this button to turn the product on or off This light is lit when operating normally, and blinks once when your adjustments are saved. For more information on the power-saving function, refer to the power saving function in More Information. When not using the product for a long time, unplugging the power cord is recommended to minimize power consumption.

Power Indicator

Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure Top Menus PICTURE Brightness Fine COLOR MagicColor Color Effect SIZE & POSITION SETUP&RESE T Auto Source INFORMATION Monitor functions may vary according to models. Please refer to actual product. H-Position Contrast Response Time Red Gamma V-Position Image Size Green Blue Color Tone Sub Menus Sharpness MagicBright Coarse

Image Size

PC signals <Auto> - The picture is displayed at the aspect ratio of the input signal. <Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal. A signal not in the standard mode table is not supported. If the resolution is set to the optimal resolution, the aspect ratio does not change whether the <Image Size> is set to <Auto> or <Wide>.
AV signals <4:3> - Displays pictures at the 4:3 aspect ratio. <16:9> - Displays pictures at the 16:9 aspect ratio. <Screen Fit> - If a 720P, 1080i or 1080P signal is input in DVI input mode, the picture is displayed as is without truncation. This can only be set when the external input is connected through DVI and <PC/AV Mode> is set to <AV>.

SETUP&RESET

Menu Reset
Description Use this function to restore the visual quality and color settings to the factory defaults. <No> - <Yes>

Menu Transparency

You can select the transparency of the OSD. <Off> - <On>
Menu Language Select a language for the OSD.
The selected language is only applied to the product OSD. This setting does not affect the other functions of the PC. Off Timer On/Off You can turn the Off Timer on or off. Off Timer Setting Auto Source <Off> - <On>
Turns the power off automatically when the configured time is reached. <Auto> - The monitor automatically selects an input signal. <Manual> - Users have to manually select an input signal. This function is not available for products with an Analog interface only.

PC/AV Mode

Set to PC when connected to a PC. Set to AV when connected to an AV device. This function does not support Analog mode.

Display Time

The OSD automatically disappears if no action is taken by the user. You can determine the time to wait before the OSD is hidden. <5 sec> - <10 sec> - <20 sec> - <200 sec>

Customized Key

You can set the function of the Customized Key to one of the following. <MagicBright> - <MagicColor> - <Color Effect> - <Image Size>

INFORMATION

Menu INFORMATION
Description Shows the frequency and resolution set on the PC. For models with an Analog interface only, <Analog/Digital> is not shown in the <Information>.

Installing the Software

Natural Color

What is Natural Color ?

This software works only for Samsung products and enables adjusting the displayed colors on the product and matches the colors on the product with the colors of the printed pictures. For more information, refer to the online help of the software (F1).
The Natural Color is provided online. You can download it from the website below and install; http://www.samsung.com/us/consumer/learningresources/monitor/naturalcolorexpert/pop_download.html

MagicTune

What is MagicTune?
MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor functions and easy-to-understand guidelines. Users can adjust the product with the mouse and the keyboard without using the operating buttons of the product.
1. Insert the installation CD into the CD-ROM drive. 2. Select the MagicTune setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the MagicTune setup file on the CD-ROM. 3. Select the installation language and click [Next]. 4. Complete the remaining software installation steps according to the instructions displayed on the screen. The software may not work properly if you do not restart the computer after the installation. The MagicTune icon may not appear depending on the computer system and the product specifications. If the shortcut icon does not appear, press the F5 key.
Restrictions and Problems with the Installation (MagicTune)
The installation of MagicTunemay be affected by the graphics card, motherboard and the networking environment.

System Requirements

OS Windows 2000 Windows XP Home Edition Windows XP Professional Windows Vista 32Bit Windows 7 32Bit For MagicTune, Windows 2000 or later is recommended. Hardware At least 32MB of memory At least 60MB of free space on the hard disk drive For more information, refer to the website.

Before Requesting Service
Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest Samsung Electronics Service Center. A BLANK SCREEN APPEARS / I CANNOT TURN THE PRODUCT ON
Is the power cord connected properly? Is the <Check Signal Cable> message displayed on the screen?
Check the connection status of the power cord. Check the cable connecting the PC and the product. If the message appears on the screen even if the cable is properly connected, recheck the input signal by pressing the button of the product. This occurs when the signal from the graphics card exceeds the maximum resolution or the maximum frequency of the product. In this case, set up the appropriate resolution and the frequency for the product.
Is the <Not Optimum Mode> message displayed on the screen?
Is a blank screen displayed and does the power LED blink at a 1 second interval?
This occurs when the power saving function is running. If you click the mouse or press any key, the screen will be turned on. If you connect the DVI cable when the PC has booted up or if you reconnect the DVI cable after disconnecting the cable while using a PC, the screen may not be displayed because some graphics cards do not output the video signal. In this case, reboot the PC while the DVI cable is connected.
Did you connect with a DVI cable?
THE IMAGE IS TOO LIGHT OR TOO DARK. Adjust the <Brightness> and <Contrast>. (Refer to the <Brightness>, <Contrast>) If <MagicBright> is set to <Dynamic Contrast>, the display brightness can differ according to the input signal. THE ON SCREEN ADJUSTMENT MENU (OSD) DOES NOT APPEAR. Did you cancel the screen adjustment? Check if the OSD Adjustment Lock function is set to Off.
THE COLOR IS WEIRD / THE PICTURE IS DISPLAYED IN BLACK AND WHITE Is the entire screen displayed in the same color as if viewing the screen through a cellophane paper? Check the cable connection to the computer. Reinsert the graphics card into the computer completely. Check if the <Color Effect> is set to <Off>. Is the graphics card configured correctly? Set up the graphics card referring to the user manual.
THE DISPLAY AREA SUDDENLY MOVES TO AN EDGE OR TO THE CENTER. Did you change the graphics card or the driver? Did you change the resolution and frequency appropriate to the product? Please press the [AUTO] button to run the auto adjustment function. Set the resolution and the frequency to the appropriate values in the graphics card refer to the (Standard Signal Mode Table) Is the graphics card configured correctly? Set up the graphics card referring to the user manual. THE PICTURES ARE OUT-OF-FOCUS. Did you change the resolution and the frequency appropriate to the product? Set the resolution and the frequency to the appropriate values in the graphics card refer to the (Standard Signal Mode Table)

More Information

Specifications
MODEL NAME Size 2333TN 23 inches (58 cm) 509.76 mm (H) x 286.74 mm (V) 0.2655 mm (H) x 0.2655 mm (V) 30 ~ 75 kHz 56 ~ 61 Hz 16.7 M Optimum resolution Maximum resolution 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz RGB Analog 0.7 Vp-p 5% RGB Analog, DVI(Digital Visual Interface) 0.7 Vp-p 5 % Separate H/V sync, Composite, SOG TTL level (V high 2.0V, V low 0.8V) 2333T

LCD Panel

Display area Pixel Pitch
Synchronization Display Color Resolution

Horizontal Vertical

Input Signal, Terminated
Separate H/V sync, Composite, SOG TTL level (V high 2.0V, V low 0.8V)
Maximum Pixel Clock Power Supply

164 MHz (Analog)

164 MHz (Analog,Digital)
This product supports 100-240 V.Since the standard voltage may differ from country to country, please check the label on the back of the product. 15pin-to-15pin D-sub cable, Detachable 15pin-to-15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable

Signal Cable

Dimensions (WxHxD) / Weight (Simple stand) VESA Mounting Interface Environmental considerations Tilt Operating
557.3 x 365.8 x 71.5 mm (21.9 x 14.4 x 2.8 inches) (Without Stand) 557.3 x 415.7 x 218.6 mm (21.9 x 16.4 x 8.6 inches) (With Stand) / 6.9 kg (15.2 lbs) 100 mm x 100 mm / 3.9 inches x 3.9 inches Temperature : 50F ~ 104F (10C ~ 40C) Humidity :10 % ~ 80 %, non-condensing Temperature : -4F ~ 113F (-20C ~ 45C) Humidity : 5 % ~ 95 %, non-condensing -1 (1.0)~16 (1.0)

Storage

Design and specifications are subject to change without prior notice. Class B (Information Communication equipment for residential use) This device is registered for EMC requirements for home use (Class B). It can be used in all areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)

Power Saving Function

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your computer. Use the software utility installed on your computer to set up this feature. STATE Power Indicator Power Consumption NORMAL OPERATION On 45 W POWER SAVING MODE Blinking Less than 1 watts POWER OFF Off Less than 1 watts

ASIA PACIFIC INDIA INDONESIA 0800-112-8888 021-5699-7777 JAPAN MALAYSIA NEW ZEALAND PHILIPPINES 0120-327-527 1800-88-SAMSUNG (786) 1-800-10-SAMSUNG(726-7864) 1-800-3-SAMSUNG(726-7864) 1-800-8-SAMSUNG(726-7864) 02-5805777 SINGAPORE TAIWAN THAILAND 1800-SAMSUNG(726-7864) 0800-329-999 1800-29-3232 02-689-3232 VIETNAM MIDDLE EAST & AFRICA BAHRAIN JORDAN SOUTH AFRICA TURKEY U.A.E 8000-4726 800-22273 0860-SAMSUNG(726-7864) 11 800-SAMSUNG(726-7864) http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.