November 11, - 02 - 01
Multiple Display Control Protocol for SyncMaster 400PX(n)460PX(n) 320PX for SyncMaster 400P(Pn)460P(Pn) 320P
Copyright Samsung Electronics Co., Ltd 2005

Copyright notice

This document is Copyright Samsung Electronics, Co. - all rights reserved.
This document is the technological property of Samsung Electronics Company and the copying and/or use of this document without permission of the Tech Document Department are prohibited.

Contact Information

Display S/W Group, VD Business Division Samsung Electronics Co., Ltd Address : 416, Maetan-3Dong, Yeongtong-Gu, Suwon City, Kyungki-Do, Korea 442-742 Telephone : 82-31-277-2340 E-mail : seunghoj@samsung.com
Author: Display S/W, Video Display Division. Status: Authored Written for: Technical Writer, Programmer, Developer Summary: This document contains the protocol for Mult iple Display C ontrol V ersion 1.0 History:
Version 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Date 2005. 01. 05. 2005. 01. 07. 2005. 01. 18. 2005. 01. 26. 2005. 03. 11. 2005. 07. 04. 2005. 11. 11. 2006. 02. 01. Content Protocol for Multiple Display Control Add Safety Lock Add Video Wall modify Maintenance Control modify Baudrate, PIP Control Add Commands Add Command ( Screen Scroll On) Add Command Author JANG SEUNG HO JANG SEUNG HO LEE JAE YOUN JANG SEUNG HO LEE JAE YOUN JANG SEUNG HO JANG SEUNG HO PARK HYO SUN Approved by
Display S/W, VD Business Team, Samsung Electronics

1) Connecting

- You can assign an ID number here from 0 to 99 to each TV or Monitor connected. The same number cannot be assigned to more than one unit. The ID numbers do not necessarily need to be assigned sequentially.
Fig. 1-1 Connecting the PC, TV or a Monitor
Not available in MagicNet.
PC PC BNC DVI HDCP TV AV S-Video Component X X X X

BNC X X X X X

DVI X X X X

HDCP X X X X

AV X X X X

S-Video X X X X

Comp. X X X X X

TV X X X X

Set OFF No. 1 No. 2 No. 3 No. 4 No. 5. No. 9. No. 16
2 X 2 0x00 0x11 0x12 0x13 0x14
3 X 3 0x00 0x21 0x22 0x23 0x24 0x25. 0x29
4 X 4 0x00 0x31 0x32 0x33 0x34 0x35. 0x39. 0x40
1 X 5 0x00 0x41 0x42 0x43 0x44 0x45
5 X 1 0x00 0x51 0x52 0x53 0x54 0x55

1 X 2 0x00 0x61 0x62

2 X 1 0x00 0x71 0x72
Safety Screen Status B Safety Screen B

Type Interval Second

Interval

Second

Scroll Type which will be set up into TV/Monitor. (3~6) Scroll Interval which will be set up into TV/Monitor.( 0(off)~10) Scroll Time which will be set up into TV/Monitor.( 0(off)~5)

Data 6

Type Scroll Pixel Bar Eraser

Interbal

Type Same as above. Interval Same as above. Second Same as above.
SEC-VD-DSW External Control - 0008

49) Panel Lock

Function The Computer turns the Panel function Key Lock of TV/Monitor On/Off. Available even when the power is turned OFF.
Get Panel Lock Status Header 0xAA Command 0x5F ID

Data Length

Check Sum
Set Panel Lock Header 0xAA Command 0x5F ID

Data 1 Panel Lock

Panel Lock : The Panel Key Lock On/Off code for the TV / Monitor. Ack Header 0xAA Command 0xFF ID

Lock Unlock

Ack/Nak 'A'

r-CMD 0x5F

Val 1 Panel Lock
Panel Lock : Same as above
Nak Header 0xAA Command 0xFF ID

Ack/Nak 'N'

Val 1 ERR
ERR : Error Code that shows the type of the error that occurred.
Display S/W, VD Business Team, Samsung Electronics 56
Function Personal Computer controls the Channel of TV.

Get Channel Header 0xAA Command 0x60 ID
Set Panel Lock Header 0xAA Check Sum P_NUM : Program Number which will be set up into TV/Monitor (0~99) CH_NUM : Channel Number which will be set up into TV/Monitor (1~125) Command 0x60 ID

DATA 1 0

DATA 2 0

DATA 3 P_NUM

DATA 4 CH_NUM
Ack Header 0xAA Val 3 P_NUM Command 0xFF Val 4 CH_NUM ID

Ack/Nak A

r-CMD 0x80

Val 1 0

Val 2 0
P_NUM : Same as above. CH_NUM : Same as above.
51) Channel Up/Down (TV Only)
Function Personal Computer changes the Channel of TV with Up/Down
Get Channel Up/Down Status Header 0xAA Command 0x61 ID
Set Channel Up/Down Lock Header 0xAA Command 0x61 ID

Data 1

Ch UpDown
Ch UpDown : Channel Up/Down code which will be set up into TV/Monitor

Ack Header 0xAA

Down Up

Command 0xFF

r-CMD 0x61

Val 1 Ch UpDown

Ch UpDown : Same as above

52) OSD On/Off

Function The Computer turns the OSD of TV/Monitor On/Off. When the OSD is ON, the OSD is displayed on the screen. When the OSD is OFF, the OSD is not displayed on the screen.
Get OSD Enable Status Header 0xAA Command 0x70 ID
Set OSD Enable/Disable Header 0xAA Command 0x70 ID

Data 1 OSD

OSD : The OSD On/Off code for the TV / Monitor. Ack Header 0xAA Command 0xFF ID

OSD Enable OSD Disable

r-CMD 0x70

Val 1 OSD

OSD : Same as above
Display S/W, VD Business Team, Samsung Electronics 59

53) P. Mode Control

Function The Computer changes the Picture Mode of TV / Monitor.
Get PMode Status Header 0xAA Set PMode Header 0xAA PMode : Source AV S-Video Component HDCP PC BNC DVI MagicNet Ack Header 0xAA Command 0xFF ID

Command 0x71

Data 1 PMode
Data 0x00 0x01 0x02 0x03 0x10 0x11 0x12 0x13
Mode Dynamic Standard Movie Custom Entertain Internet Text Custom

r-CMD 0x71

Val 1 PMode

PMode : Same as above

Display S/W, VD Business Team, Samsung Electronics 60

54) S. Mode Control t

Function Personal Computer changes the Sound Mode of TV/Monitor.
Get SMode Status Header 0xAA Set NR Mode Header 0xAA Command 0x72 ID

Command 0x72

Data 1 S Mode
S Mode : The NR Mode On/Off code for the TV / Monitor. Data 0x00 0x01 0x02 0x03 0x04 Mode Standard Music Movie Speech Custom
Ack Header 0xAA Command 0xFF ID

r-CMD 0x72

Val 1 S Mode

S Mode : Same as above

r-CMD 0x73
Display S/W, VD Business Team, Samsung Electronics 6
55) NR Mode Set(AV, S-Video, Component, DVI(HDCP) Only)
Function The Computer changes the Digital NR Mode.
Get NR Mode Status Header 0xAA Set NR Mode Header 0xAA Command 0x73 ID

Command 0x73

Data 1 NR Mode
NR Mode : The NR Mode On/Off code for the TV / Monitor. Ack Header 0xAA Command 0xFF ID

NR Mode On NR Mode Off

Val 1 NR Mode

NR Mode : Same as above

56) PC Color Tone Control (PC, BNC, DVI Only)
Function The Computer changes the Color Tone of TV/Monitor.

PC, BNC, DVI Only

Get Color Tone Status Header 0xAA Command 0x75 ID
Set Color Tone Header 0xAA Command 0x75 ID

Data 1 Color Tone

Color Tone : The Color Tone Value Code for the TV / Monitor (1 ~ 3) Source PC DVI BNC

Data 0x00 0x01 0x02 0x03

Mode Custom Cool Normal Warm

r-CMD 0x75

Val 1 Color Tone
Color Tone : Same as above
Display S/W, VD Business Team, Samsung Electronics 63

57) Auto AutoAdjustment

Function The Computer adjusts the Auto Adjustment of TV/Monitor Enable/Disable. Auto Adjustment is only available when the power is turned On.
Get A.Adjustment Status Header 0xAA Command 0x76 ID
Set A.Adjustment Header 0xAA Command 0x76 ID

Data 1 A.Adjustment

A.Adjustment : The Auto Adjustment Value Code for the TV / Monitor. Ack Header 0xAA Command 0xFF ID

Enable Disable

r-CMD 0x76

Val 1 A.Adjustment

A.Adjustment : Same as above

58) All Keys Lock

Function The Computer switches both the Remote Control and the Panel Key Lock function ON/OFF. Available even if the power is turned OFF.
Get All Key Status Header 0xAA Command 0x77 ID
Set All Key Lock/Unlock Header 0xAA Command 0x77 ID

Data 1 All Key

All Key : The Key Lock On/Off Code for the TV / Monitor. Ack Header 0xAA Command 0xFF ID

r-CMD 0x77

Val 1 All Key

All Key : Same as above

Display S/W, VD Business Team, Samsung Electronics 65
Function Personal Computer enables ON/OFF of SRS TSXT for TV/Monitor.

Get SRS TSXT Status Header 0xAA Set SRS TSXT Header 0xAA Command 0x78 ID

Command 0x78

SRS : SRS TSXT Code which will be set up into TV/Monitor
0 Ack Header 0xAA Command 0xFF ID

SRS ON

SRS OFF

r-CMD 0x78

Val 1 SRS

SRS : Same as above

60) Film Mode Control
Function Personal Computer enables ON/OFF of Film Mode for TV/Monitor.
Get Film Mode Status Header 0xAA Set Film Mode Header 0xAA Command 0x79 ID

Command 0x79

FMode : Film Mode Code which will be set up into TV/Monitor
0 Ack Header 0xAA Command 0xFF
Film Mode ON Film Mode OFF

r-CMD 0x79

FMode : Same as above
61) Signal Balance (PC, BNC, Only)
Function Personal Computer enables ON/OFF of Signal Balance for TV/Monitor.
Get Signal Balance Status Header 0xAA Command 0x7A ID
Set Signal Balance Header 0xAA Command 0x7A ID

SBalance

SBalance Signal Balance Code which will be set up into TV/Monitor

0 Ack Header 0xAA

Signal Balance ON Signal Balance OFF

Same as above

62) SB Phase R ( PC, BNC, Only)
Function Personal Computer changes the Phase R value of Signal Balance for Monitor.
Get SBPhaseR Status Header 0xAA Set SBPhaseR Header 0xAA Command 0x7B ID

Command 0x7B

SBPhaseR
SBPhaseR Phase R value which will be set up into Monitor. Code(0~100)

r-CMD 0x7B

SBPhaseR Same as above
6 ) SB Phase G (PC, BNC Only )
Function Personal Computer changes the Phase G value of Signal Balance for Monitor.
Get SBPhaseG Status Header 0xAA Set SBPhaseG Header 0xAA Command 0x7C ID

Command 0x7C

SBPhaseG
SBPhaseG Phase G value which will be set up into Monitor. Code(0~100)

r-CMD 0x7C

SBPhaseG Same as above
Display S/W, VD Business Team, Samsung Electronics 70
64) SB Phase B ( PC, BNC Only )
Function Personal Computer changes the Phase B value of Signal Balance for Monitor.
Get SBPhaseB Status Header 0xAA Set SBPhaseB Header 0xAA Command 0x7D ID

Command 0x7D

SBPhaseB
SBPhaseB Phase B value which will be set up into Monitor. Code(0~100)

r-CMD 0x7D

SBPhaseB Same as above
65) SB Gain ( PC, BNC Only )
Function Personal Computer changes the Gain value of Signal Balance for Monitor.
Get SBGain Status Header 0xAA Set SBGain Header 0xAA

SBGain

Command 0x7E

Gain value which will be set up into Monitor. Code(0~100)

r-CMD 0x7E

r-CMD 0x7E E
66) SB Sharpness ( PC, BNC Only )
Function Personal Computer changes the Sharpness value of Balance for Monitor.
Get SBSharpness Status Header 0xAA Command 0x7F ID
Set SBSharpness Header 0xAA Command 0x7F ID

SBSharpness

SBSharpness Sharpness value which will be set up into Monitor. Code(0~100)

r-CMD 0x7F

Display S/W, VD Business Team, Samsung Electronics 73

) Screen Scroll On

Function Allows Scroll function for current monitor screen

Get Safety Screen Status

Set Safety Screen Header 0xAA Command 0x88 ID

Data 1 Second

Second : Time to function Scroll for TV/Monitor. (Per Second, 1 ~ 5)

r-CMD 0x88

Val 1 Second
ScrollTime : Same as above

The application can only retrieve data that corresponds to the parameter. Sample Code #define CMD_VOLUME { UCHAR SendBuff[3] = {0, 0, 0}; SendBuff[0] = CMD_VOLUME; //Volume Control Command SendBuff[1] = 0x01; //Data Length SendBuff[2] = data; //Volume Data DWORD dRetSend = MLS_HAL_I2C_Send(SendBuff, 3); } 0x12
3) When the Application Receives the Current Volume Values
For command explanations mentioned below, the data formats are as follows. Library receives data in the formats described below. Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x12 Val 1 Volume Check Sum
When library receives data from the firmware, it sends a Windows Message [::RegisterWindowMessage(_T("MSG_MDC_COMM"))] for confirmation, and transfers commands and data lengths to WPARAM, a Windows message parameter. When the application receives the [::RegisterWindowMessage(_T("MSG_MDC_COMM"))] Windows Message above, it can translate WPARAM and get the data that library received from the firmware. Sample Code const UINT MDC_COMM_MSG = ::RegisterWindowMessage(_T("MSG_MDC_COMM")); #define CMD_VOLMUE 0x12
WindowProc(UINT message, WPARAM wParam, LPARAM lParam) { if(message == MDC_COMM_MSG)//The Message that library receives data from the firmware { unsigned char* ReadBuff = (PUCHAR)wParam; if(ReadBuff[0] == 0xFF) { if((ReadBuff[2] == 0x01) // Replied data is ACK { if (ReadBuff[3] == CMD_VOLMUE) ) // Volume Data is received ShowVolume(ReadBuff[4]); } } //MDC Command

4. Command

No Type of Command Status Control Time Control On Time Control Off Time Control Video Control Audio Control RGB Control PIP Status Control Maintenance Control Display Status Control SW Version Control Model Number Control Power Control Volume Control Mute Control Input Source Control Image Size Control Direct Channel Control Contrast Control Brightness Control Sharpness Control Color Control Tint Control Red Gain Control Green Gain Control Blue Gain Control Treble Control Bass Control Balance Control Coarse Control Fine Control H-Position Control Command 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x0D 0x0E 0x10 0x11 0x12 0x13 0x14 0x15 0x17 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F 0x30 0x~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 1 Range of Value(Decimal) -
V-Position Control Clear Menu Control Remote Control RGB Contrast Control RGB Brightness Control PIP On/Off Control Auto Adjustment Control Color Tone Control Color Temperature Control PIP Source Control Main-PIP Swap Control PIP Size Control PIP Locate Control Sound Select Control Auto Lamp Control Manual Lamp Control Safety Screen Control Video Wall Mode Control Safety Lock Panel Lock OSD On/Off P. Mode Control S. Mode Control NR Mode Set PC Color Tone Control Auto AutoAdjustment All Keys Lock SRS TSXT Control Film Mode Signal Balance SB Gain SB Sharpness Panel On Time Video Wall On Temperature Control Brightness Sensor

0x32 0x34 0x36 0x37 0x38 0x3C 0x3D 0x3E 0x3F 0x40 0x41 0x42 0x43 0x47 0x57 0x58 0x5B 0x5C 0x5D 0x5F 0x70 0x71 0x72 0x73 0x75 0x76 0x77 0x78 0x79 0x7A 0x7E 0x7F 0x83 0x84 0x85 0x86
0 ~ 0 ~ ~ ~ ~ 0 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 1
Dynamic Contrast Safety Screen On Video Wall User Control Model Name Control MagicNet PIP Panel On/Off
0x87 0x88 0x89 0x8A 0xE0 0xF9

0 ~ ~ ~ 1

Note : "-" indicates when the values to be set are multiple. See "4.1. Detailed Description of Commands" for details
4.1. Detailed Description of Commands

1) Status Control

Function The Computer shows the current settings for the TV/Monitor. Get Status Command Data Length 0x00 0
Ack Command Data Length 0xFF Val 3 Mute 9 Val 4 Input Ack/Nak 'A' Val 5 Aspect r-CMD 0x00 Val 6

N Time NF

Val 1 Power Val 7

F Time NF

Val 2 Volume Check Sum
Power : The Power Code for the TV / Monitor Volume : The Volume value for the TV / Monitor ( 0 ~ 100 ) Mute : The Mute Code for the TV / Monitor Input : The Input Source Code for the TV / Monitor Aspect : The Image Size Code for the TV / Monitor N Time NF : On Time On/Off value for the TV / Monitor F Time NF : Off Time On/Off value for the TV / Monitor
Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x00 Val 1 ERR Check Sum
ERR : Error Code that shows the type of the error that occurrederror that occurred. Check Sum Error Others

2) Time Control

Function The Computer controls the current the for the TV/Monitor Get Time Status Command Data Length 0x01 0
Set Time Command Data Length 0x01 Data 5

Data 1 AP Time

Data 2 H Time

Data 3 M Time

Data 4 0

AP Time 1 0

: The AM/PM value for the TV / Monitor AM PM
H Time : The Hour Value for the TV / Monitor ( 1 ~ 12 ) M Time : The Minute Value for the TV / Monitor ( 0 ~ 59 ) Ack Command Data Length 0xFF Val 3 M Time 7 Val Ack/Nak 'A' Val 5

r-CMD 0x01 Check Sum

Val 1 AP Time

Val 2 H Time

AP Time, H Time, M Time : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x01 Val 1 ERR Check Sum
ERR : Error Code that shows the type of the error that occurrederror that occurred

3) On Time Control

Function The Computer controls when the TV / Monitor turns on. Get On Time Status Command Data Length 0x02 0
Set On Time Command Data Length 0x02 Data 5

Data 1

Data 2

Data 3

N M Time

Data 4

N Time VR

6 Data 6

N Time SC

N AP Time N H Time

N AP Time : The On Time AM/PM value for the TV / Monitor. AM PM
N H Time : The On Time Hour Value for the TV / Monitor ( 1 ~ 12 ) N M Time : The On Time Minute Value for the TV / Monitor ( 0 ~ 59 ) N Time VR : The On Time Volume for the TV / Monitor ( 0 ~ 100 ) N Time NF : The On Time On/Off value for the TV / Monitor On Time ON On Time OFF
N Time SC : The source value for the On Time Control(See 'Input Source Control ')
Ack Command Data Length 0xFF Val Val 4 Ack/Nak 'A' Val 5 r-CMD 0x02 Val 6
N M Time N Time VR N Time NF
N AP Time, N H Time, N M Time, N Time VR, N Time NF, N Time SC : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x02 Val 1 ERR Check Sum

4) Off Time Control

Function The Computer controls when the The Computer turn off. Get Off Time Status Command Data Length 0x03 0
Set Off Time Command Data Length 0x03 Data 5
F AP Time F H Time F M Time

F AP Time 1 0

: The Off Time AM/PM value for the TV / Monitor AM PM
F H Time : The Off Time Hour Value for the TV / Monitor ( 1 ~ 12 ) F M Time : The Off Time Minute Value for the TV / Monitor ( 0 ~ 59 ) F Time NF: The Off Time On/Off value for the TV / Monitor. Off Time ON Off Time OFF
Ack Command Data Length 0xFF Val 3

F M Time

Ack/Nak 'A' Val 5

r-CMD 0x03 Val 6

8 Val 4

F AP Time F H Time

F AP Time, F H Time, F M Time, F Time NF : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x03 Val 1 ERR Check Sum
ERR : Error Code that shows the type of the error that occurred
5) Video Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer shows the screen settings for the TV / Monitor Get Video Status Command Data Length 0x04 0
Ack Command Data Length 0xFF Val 3 Sharpnes s 0x0A Val 4 Color Ack/Nak 'A' Val 5 Tint r-CMD 0x04 Val 6 Val 1 Val 2
Contrast Brightness Val 7 Val Check Sum

ColorTone ColorTemp

Contrast, Brightness, Sharpness, Color, Tint, ColorTone, ColorTemp : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x04 Val 1 ERR Check Sum

6) Audio Control

Function The Computer controls the audio settings for the TV/ Monitor. Get Audio Status Command Data Length 0x05 0
Ack Command Data Length 0xFF Val 3 Balance 0x05 Check Sum Ack/Nak 'A' r-CMD 0x05 Val 1 Treble Val 2 Bass

Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x11 Val 1 Power Check Sum
Power : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x11 Val 1 ERR Check Sum

14) Volume Control

Function The Computer changes the Volume level of the TV / Monitor Get Volume Status Command Data Length 0xVolume.
Set Volume Command Data Length 0xData 1 Volume
Volume : The Volume level value Code of the TV / Monitor ( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x12 Val 1 Volume Check Sum
Volume : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x12 Val 1 ERR Check Sum

15) Mute Control

Function The Computer turns the Mute of the TV / Monitor Get Mute ON/OFF Status Command Data Length 0x13 0
Set Mute ON/OFF Command Data Length 0xData 1 Mute
Mute : The Mute Code of the TV / Monitor Mute ON Mute OFF
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x13 Val 1 Mute Check Sum
Mute : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x13 Val 1 ERR Check Sum

16) Input Source Control

Function The Computer changes the Input Source of the TV / Monitor. Get Input Source Status Command Data Length 0x14 0
Set Input Source Command Data Length 0xData 1 Input
Input : The Input Source Code for the TV / Monitor 0x14 0x1E 0x18 0x0C 0x04 0x08 0x20 0x21 0x30 0x40 Note : TV/DTV Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x14 Val 1 Input Check Sum PC BNC DVI AV S-Video Component MagicNet HDMI TV DTV TV only
Input : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x14 Val 1 ERR Check Sum

17) Picture Size Control

Function The Computer changes the Aspect Ratio of the TV / Monitor screen. Get Picture Size Status Command Data Length 0x15 0
Set Picture Size Command Data Length 0xData 1 Aspect
Aspect : The Picture Size Code for the TV / Monitor PC, BNC, DVI 0x10 0x18 0x00 0x01 0x05 0x06 0x0B 16 : : 3 Auto Wide 16 : 9 Zoom 1 Zoom : 3
TV, AV, S-VIdeo, Component, HDMI
Note : Some Image Size may not available in input signal mode of 720p, 1080i Auto Wide Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x15 Val 1 Aspect Check Sum TV only
Aspect : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x15 Val 1 ERR Check Sum
18) Direct Channel Control(ATV, DTV Only)
Function The Computer controls the Channel of TV. Get Direct Channel status Command Data Length 0x17 0
Set Direct Channel Command Data Length 0x17 Data 6 Sel_Monitor 8 Data 1 Country Data 7 Minor_CH High_Byte Data 2 ATV_DTV Data 3 AirCable Data 4 CH_NUM High_Byte Data 5 CH_NUM Low_Byte

Data 8 Minor_CH Low_Byte

Ack Command 0xFF Val 3 AirCable
Ack/Nak 'A' Val 5 CH_NUM Low_Byte

r-CMD 0x17

Val 1 Country Val 6
Val 2 ATV_DTV Val 7 Minor_CH High_Byte Val 8 Minor_CH Low_Byte
0x0A Val 4 CH_NUM High_Byte

Sel_Monitor

Country : The value code for the country of the TV / Monitor (0 : Korea, 1: U.S.A,.) ATV_DTV : The value code for the ATV/DTV of the TV / Monitor (0 : Analog TV, 1: Digital TV) AirCable : The value code for the Air/Cable of the TV / Monitor (0 : Air, 1: Cable) CH_NUM High_Byte : The value code for the Major Channel High-Byte of the TV / DTV (Analog TV : 1 ~ 135, Digital TV : 0 ~ 999) CH_NUM Low_Byte : The value code for the Major Channel Low-Byte of the TV / DTV (Analog TV : 1 ~ 135, Digital TV : 0 ~ 999) Sel_Minor : The value code for the Minor Channel Enable/Disable of the TV / Monitor (0 : Enable, 1 : Disable)(DTV Only) Minor_CH High_Byte : The value code for the Minor Channel High-Byte of the TV / Monitor (0 ~ 999)(DTV Only) Minor_CH Low_Byte : The value code for the Minor Channel Low-Byte of the TV / Monitor (0 ~ 999)(DTV Only) Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x0D Val 1 ERR Check Sum
19) Contrast Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjusts the Contrast of the TV / Monitor. Get Contrast Status Command Data Length 0x24 0
Set Contrast Command Data Length 0xData 1 Contrast
Contrast : The Contrast Value Code of the TV / Monitor ( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x24 Val 1 Contrast Check Sum
Contrast : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x24 Val 1 ERR Check Sum
20) Brightness Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjusts the Brightness settings of the TV / Monitor Get Brightness Status Command Data Length 0x25 0
Set Brightness Command Data Length 0xData 1 Brightness
Brightness : The Brightness value code for the TV / Monitor( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x25 Val 1 Brightness Check Sum
Brightness : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x25 Val 1 ERR Check Sum
21) Sharpness Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjusts the Sharpness of the TV / Monitor. Get Sharpness Status Command Data Length 0x26 0
Set Sharpness Command Data Length 0xData 1 Sharpnes s
Sharpness : The Sharpness Value Code for the TV / Monitor ( 0 ~ 100 ) Note : Sharpness can be set up within 50 Step(0, 2, 4, 6. 100) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x26 Val 1 Sharpnes s Check Sum
Sharpness : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x26 Val 1 ERR Check Sum
22) Color Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjusts the Color settings of the TV / Monitor. Get Color Status Command Data Length 0x27 0
Set Color Command Data Length 0xData 1 Color
Color : The Color Value Code for the TV / Monitor ( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x27 Val 1 Color Check Sum

Color : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x27 Val 1 ERR Check Sum
23) Tint Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjusts the Tint of the TV / Monitor when the video format is NTSC Note : It does not work in PAL signal. Get Tint Status Command Data Length 0x28 0
Set Tint Command Data Length 0xData 1 Tint
Tint : The Tint Value Code for the TV / Monitor ( 0 ~ 100 ) R G Tint Value (100 - Tint) Value
Note : Tint can be set up within 50Step (0, 2, 4, 6. 100) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x28 Val 1 Tint Check Sum
Tint : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x28 Val 1 ERR Check Sum
24) Red Gain Control (PC, BNC, MagicNet Only)
Function The Computer adjusts the Red Gain of the TV / Monitor. Get Red Gain Status Command Data Length 0x29 0
Set Red Gain Command Data Length 0xData 1 Red
Red : The Red Gain Value Code for the TV / Monitor ( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x29 Val 1 Red Check Sum
Red : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x29 Val 1 ERR Check Sum
25) Green Gain Control (PC, BNC, MagicNet Only)
Function The Computer adjusts the Green Gain of the TV / Monitor Get Green Gain Status Command Data Length 0x2A 0
Set Green Gain Command Data Length 0x2A 1 Data 1 Green
Green : The Green Gain Value Code of the TV / Monitor ( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x2A Val 1 Green Check Sum
Green : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x2A Val 1 ERR Check Sum
26) Blue Gain Control (PC, BNC, MagicNet Only)
Function The Computer adjusts the Blue Gain of the TV / Monitor. Get Blue Gain Status Command Data Length 0x2B 0
Set Blue Gain Command 0x2B Blue : The Blue Gain Value Code of the TV / Monitor( 0 ~ 100 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x2B Val 1 Blue Check Sum
Blue : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x2B Val 1 ERR Check Sum

27) Treble Control

Function The Computer adjusts the Treble of the TV / Monitor. Get Treble Status Command Data Length 0x2C 0
Set Treble Command Data Length 0x2C 1 Data 1 Treble
Treble : The Trable Value Code for the TV / Monitor ( 0 ~ 100 ) Note : Treble can be set up within 40 Step. (0, 2, 5, 7. 100) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x2C Val 1 Treble Check Sum
Treble : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x2C Val 1 ERR Check Sum

PIP : PIP On/Off Code for the TV / Monitor PIP ON PIP OFF
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x3C Val 1 PIP Check Sum
PIP : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x3C Val 1 ERR Check Sum
39) Auto Adjustment Control (PC, BNC Only)
Function The Computer adjusts the RGB Screen settings of the TV / Monitor. Get Auto Adjustment Status None. Set Auto Adjustment Command Data Length 0x3D 1 Data 1 Auto
Auto : 0x00 (Always) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x3D Val 1 Auto Check Sum
Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x3D Val 1 ERR Check Sum
40) Color Tone Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer adjust the Color Tone setting of the TV / Monitor. Get Color Tone Status Command Data Length 0x3E 0
Set Color Tone Command Data Length 0x3E 1 Data 1 Color Tone
Color Tone : The Color Tone Value Code for the TV / Monitor( 0 ~ 4 ) 0x00 0x01 0x02 0x03 0x04 0x50 Cool 2 Cool 1 Normal Warm 1 Warm 2 Off
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x3E Val 1 Color Tone Check Sum
Color Tone : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x3E Val 1 ERR Check Sum

41) Color Temp Control

Function The Computer adjust the Color Temp setting of the TV / Monitor. This function is only available that Color Tone value is 'OFF' Get Color Temp Status Command Data Length 0x3F 0
Set Color Tone Command Data Length 0x3F 1 Data 1 Color Temp
Color Temp : The Color Temp Value Code for the TV / Monitor( 0 ~ 10 ) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x3F Val 1 Color Temp Check Sum
Color Temp : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x3F Val 1 ERR Check Sum

42) PIP Source Control

Function The Computer adjusts the PIP Source of the TV / Monitor. Available only when the PIP function is On. Not available in MagicNet Get PIP Source Status Command Data Length 0x40 0
Set PIP Source Command Data Length 0xData 1 P.Source
P.Source : The Input source Code for the TV / Monitor Changing the PIP source may not be available depending on the main source. See table below. <460Txn Model> PC PC DVI TV/DTV AV S-Video Component HDMI X X X X X DVI X X X TV/DTV X X X X X X X X X X X X X X X X X X X X X X AV S-Video Component HDMI X X X X X X X

<400/460/570/700/820Dxn Model> PC PC BNC DVI DVI_VIDEO AV S-Video Component HDMI Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x40 Val 1 P.Source Check Sum X X X X X X X BNC X X X X DVI X X X X DVI_VIDEO X X X X X X X X X X X X X X X X X X X X X X X AV S-Video Component HDMI
P.Source : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x40 Val 1 ERR Check Sum
43) Main-PIP Swap Control
Function The Computer swap the main screen with the PIP screen. Not available in MagicNet. Get Main-PIP Swap Status None. Set Main-PIP Swap Command Data Length 0xData 1 Swap
Swap : 0x00 (Always) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x41 Val 1 Swap Check Sum
Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x41 Val 1 ERR Check Sum

44) PIP Size Control

Function The Computer changes the PIP size of the TV / Monitor. Not available in MagicNet. Get PIP Size Status Command Data Length 0x42 0
Set PIP Size Command Data Length 0xData 1 P.Size
P.Size : The PIP Size Value Code for the TV / Monitor. 0x00 0x06 0x08 0x04 0x05 0x09 PIP Off Large Small Double 1 Double 2 Double 3
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x42 Val 1 P.Size Check Sum
P.Size : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x42 Val 1 ERR Check Sum

45) PIP Locate Control

Function The Computer adjusts the PIP position of the TV / Monitor. Not available in MagicNet. Get PIP Locate Status None Set PIP Locate Command Data Length 0xData 1 P.Locate
P.Locate : The value code for PIP LOCATE of the TV / Monitor 4 PIP Off(Get Only) Upper Left Upper Right Lower Right Lower Left
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x43 Val 1 P.Locate Check Sum
P.Locate : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x43 Val 1 ERR Check Sum

46) Sound Select Control

Function The Computer adjust the Sound Settings of the TV/Monitor when the PIP function is on. Get Sound select Command Data Length 0x47 0
Set Sound select Command Data Length 0xData 1 S.Select
S.Select : The Sound select Code for TV / Monitor Main Sub
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x47 Val 1 S.Select Check Sum
S.Select : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x47 Val 1 ERR Check Sum

47) Auto Lamp Control

Function The Computer adjusts the Auto Lamp Function Settings of the TV / Monitor. When Manual Lamp Control is set to ON, Auto Lamp Control is turned Off automatically. Get Auto Lamp Command Data Length 0x57 0

Set Auto Lamp Command Data Length 0x57 Data 5 LMin_H 8 Data 6 LMin_M Data 1 LMax_H Data 2 Data 3 Data 4
LMax_M LMax_AP LMaxValue Data 8 LMinValue

Data 7 LMin_AP

Ack Command Data Length 0xFF Val 3 0x0A Val 4 Ack/Nak 'A' Val 5 r-CMD 0x57 Val 6 LMin_M Val 1 LMax_H Val 7 LMin_AP Val 2 LMax_M Val 8 LMinValue Check Sum

LMax_AP LMaxValue LMin_H

LMax_H : The value code for the Auto Lamp Max Time Hour of the TV / Monitor.(1 ~ 12) LMax_M : The value code for the Auto Lamp Max Time Minute of the TV / Monitor.(0 ~ 59) LMax_AP : The value code for the Auto Lamp Max Time AM/PM of the TV / Monitor. LMaxValue : The value code for the Auto Lamp Max Value of the TV / Monitor. (0 ~ 100) LMin_H : The value code for the Auto Lamp Min Time Hour of the TV / Monitor. (1 ~ 12) LMin_M : The value code for the Auto Lamp Min Time Minute of the TV / Monitor. (0 ~ 59) LMin_AP : The value code for the Auto Lamp Min Time AM/PM of the TV / Monitor. LMinValue : The value code for the Auto Lamp Min Value of the TV / Monitor.(0 ~ 100) Note : If LMinValue returns to 0xFF, it means Auto Lamp Control is in OFF mode. If Dynamic contrast is set to on, Auto Lamp Control is not work. Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x57 Val 1 ERR Check Sum

48) Manual Lamp Control

Function The Computer adjusts the Manual Lamp Function settings of the TV / Monitor. When Auto Lamp Control is set to ON, Manual Lamp Control is turned off automatically. Get Manual Lamp Status Command Data Length 0x58 0
Set Manual Lamp Command Data Length 0xData 1 LampValue
LampValue : The Manual Lamp Value code for the TV / Monitor(0 ~ 100) Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x58 Val 1 LampValue Check Sum
LampValue : Same as above Note : If Lamp Value returns to 0xFF ,it means Manual Lamp Control is in OFF mode If Dynamic contrast is set to on, Auto Lamp Control is not work. Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x58 Val 1 ERR Check Sum
49) Safety Screen Control

A.Adjustment : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x76 Val 1 ERR Check Sum

59) All Keys Lock

Function The Computer switches both the Remote Control and the Panel Key Lock function ON/PFF. Available even if the power is turned OFF. Get All Key Status Command Data Length 0x77 0
Set All Key Lock/Unlock Command Data Length 0xData 1 All Key
All Key : The Key Lock On.Off Code for the TV / Monitor Lock Unlock
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x77 Val 1 All Key Check Sum
All Key : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x77 Val 1 ERR Check Sum

60) SRS TSXT Control

Function The Computer enables ON/OFF of SRS TSXT for TV/Monitor. Get SRS TSXT Status Command Data Length 0x78 0
Set SRS TSXT Command Data Length 0xData 1 SRS
SRS: SRS TSXT Code which will be set up into TV / Monitor SRS On SRS Off
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x78 Val 1 SRS Check Sum
SRS : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x78 Val 1 ERR Check Sum

61) Film Mode Control

Function The Computer enables ON/OFF of Film Mode for TV/Monitor. Get Film Mode Status Command Data Length 0x79 0
Set Film Mode Command Data Length 0xData 1 FMode
FMode : Film Mode Code which will be set up into TV / Monitor Film Mode On Film Mode Off
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x79 Val 1 FMode Check Sum
FMode : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x79 Val 1 ERR Check Sum
62) Signal Balance (PC,BNC Only)
Function The Computer enables ON/OFF of Signal Balance for Monitor. Get Signal Balance Status Command Data Length 0x7A 0
Set Signal Balance Command Data Length 0x7A 1 Data 1 SBalance
SBalance : Signal Balance Code which will be set up into Monitor Signal Balance On Signal Balance Off
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x7A Val 1 SBalance Check Sum
SBalance : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x7A Val 1 ERR Check Sum
63) SB Gain (PC,BNC Only)
Function The Computer changes the Gain value of Signal Balance for Monitor. Get SBGain Status Command Data Length 0x7E 0
Set SBGain Command Data Length 0x7E 1 Data 1 SBGain
SBGain : Gain value which will be set up into Monitor.Code (0~ 100)
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x7E Val 1 SBGain Check Sum
SBGain : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x7E Val 1 ERR Check Sum
64) SB Sharpness (PC,BNC Only)
Function The Computer changes the Sharpness value of Signal Balance for Monitor. Get SB Sharpness Status Command Data Length 0x7F 0

BR_Sensor : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x86 Val 1 ERR Check Sum
69) Dynamic Contrast(ATV, DTV, AV, S-Video, Component, HDMI Only)
Function The Computer enables ON/OFF of Dynamic Contrast for TV/Monitor. Get Dynamic Contrast ON/OFF Status Command Data Length 0x87 0
Set Dynamic Contrast ON/OFF Command Data Length 0xData 1 DY_Cont
DY_Cont : Dynamic Contrast Code which will be set up into Monitor Dynamic Contrast On Dynamic Contrast Off
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x87 Val 1 DY_Cont Check Sum
DY_Cont : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x87 Val 1 ERR Check Sum

70) Safety Screen On

Function Allows Safety Screen function for current TV/Monitor screen Get Safety screen Status None Set Safety screen Command Data Length 0xData 1 Second
Second : Time to function Scroll for TV/Monitor. (Per Second 1 ~ 5)
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0x88 Val 1 Second Check Sum
Second : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x88 Val 1 ERR Check Sum

71) Video Wall Control

Function The Computer control the ON/OFF operation of the Video Wall feature for the TV / Monitor. Not available in MagicNet. Get Video Wall Status Command Data Length 0x89 0
Set Video Wall Command Data Length 0xData 1 Data 2

Wall_Div Wall_SNo

Wall_Div : The Video Wall Divider code for the TV / Monitor V H OFF 0x00 0x11 0x21 0x31 0x41 0x0x00 0x12 0x22 0x32 0x42 0x0x00 0x13 0x23 0x33 0x43 0x0x00 0x14 0x24 0x34 0x44 0x0x00 0x15 0x25 0x35 0x45 0x55
Wall_SNo : The Video Wall Number code for the TV / Monitor Set Number 1 2. Data 0x01 0x02. 0x18 0x19
Ack Command Data Length 0xFF 4 Ack/Nak 'A' r-CMD 0x89 Val 1 Val 2 Check Sum
Wall_Div : Same as above Wall_SNo : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0x89 Val 1 ERR Check Sum

72) Model Name Control

Function The Computer shows the Model Name information of the TV / Monitor Get Model Name Status Command Data Length 0x8A 0
Ack Command Data Length 0xFF Val 6 0x12 Val 7 Ack/Nak 'A' Val_8 r-CMD 0x8A Val_9 Val 1 Val 2 Val_3 Val_4 Val_5
M_Name1 M_Name2 M_Name3 M_Name4 M_Name5 Val_10 Val 11 Val_12 Val_13
M_Name6 M_Name7 M_Name8 M_Name9 M_Name10 M_Name11 M_Name12 M_Name13 Val_14 M_Name14 Val_15 M_Name15 Val_16 M_Name16 Check Sum
M_Name1 ~ M_Name16 : The Model Name code for the TV / Monitor M_Name1 M_Name2 M_Name3 M_Name4 M_Name5 M_Name6 M_Name7 M_Name8 M_Name9 M_Name10 M_Name11 M_Name12 M_Name13 M_Name14 M_Name15 M_Name16 'S' 'y' 'n' 'c' 'M' 'a' 's' 't' 'e' 'r' '4' '0' '0' 'D' 'X' 'N'
73) MagicNet PIP (MagicNet Only)
Function The Computer turns the PIP function ON/OFF at MagicNet. Get MagicNet PIP status None Set MagicNet PIP On - (Data in Red font is for model 460Txn) Command Data Length 0xE0 Data 6 0x0C (0x13) Data 7

PIP ON

Data 1 H Position High-Byte Data 9 P.Source Data 17
Data 2 H Position Low-Byte Data 10 TV Channel Data 18 Minor_CH Low_Byte
Data 3 V Position High-Byte
Data 4 V Position Low-Byte
Data 5 H Size High-Byte Data 13 AirCable

0x01 Data 8

Data 11 Data 11 Data 12 S.Select Country ATV/DTV
H Size V Size Low-Byte High-Byte Data 14 Data 15

V Size Low-Byte Data 16

CH_NUM CH_NUM Minor_CH High_Byte Low_Byte Sel_Minor High_Byte
H Position High-Byte : The Position value code for PIP H-Start High-Byte. H Position Low-Byte : The Position value code for PIP H-Start Low-Byte. V Position High-Byte : The Position value code for PIP V-Start High-Byte. V Position Low-Byte : The Position value code for PIP V-Start Low-Byte. H Size High-Byte : The Size value code for PIP H-width High-Byte. H Size Low-Byte : The Size value code for PIP H-width Low-Byte. V Size High-Byte : The Size value code for PIP V-width High-Byte. V Size Low-Byte : The Size value code for PIP V-width Low-Byte. Note : The PIP Start Position and Size do not over 1366 X 768 or 1920 X 1080 P.Source : The Input source Code 0x14 0x1E 0x18 0x0C 0x04 0x08 0x21 0x30 0x40 PC BNC DVI AV S-Video Component HDMI TV DTV
TV Channel : Channel Number (0~99) Note : 460Txn Only S.Select : The Sound select Code MagicNet Sound PIP Sound
Country : The value code for the country of the TV / Monitor (0 : Korea, 1: U.S.A,.) ATV_DTV : The value code for the ATV/DTV of the TV / Monitor (0 : Analog TV, 1: Digital TV) AirCable : The value code for the Air/Cable of the TV / Monitor (0 : Air, 1: Cable) CH_NUM High_Byte : The value code for the Major Channel High-Byte of the TV / DTV (Analog TV : 1 ~ 135, Digital TV : 0 ~ 999) CH_NUM Low_Byte : The value code for the Major Channel Low-Byte of the TV / DTV (Analog TV : 1 ~ 135, Digital TV : 0 ~ 999) Sel_Minor : The value code for the Minor Channel Enable/Disable of the TV / Monitor (0 : Enable, 1 : Disable)(DTV Only) Minor_CH High_Byte : The value code for the Minor Channel High-Byte of the TV / Monitor (0 ~ 999)(DTV Only) Minor_CH Low_Byte : The value code for the Minor Channel Low-Byte of the TV / Monitor (0 ~ 999)(DTV Only) Ack(Data in Red font is for model 460Txn) Command Data Length 0xFF Val 5 H Size Low-Byte Val 13 ATV_DTV 0x15 Val 6 H Size High-Byte Val 14 AirCable Ack/Nak 'A' Val 7 r-CMD 0xE0 Val 8
Val 3 V Position Low-Byte
Val 4 V Position High-Byte
H Position H Position Low-Byte High-Byte Val 10 TV Channel
Val 11 S.Select Val 19 Minor_CH Low_Byte

Val 12 Country

V Size V Size Low-Byte High-Byte P.Source Val 15 CH_NUM High_Byte Val 16 CH_NUM Low_Byte Val 17
Val 18 Minor_CH High_Byte

Sel_Minor

H Position Low-Byte : Same as above H Position High-Byte : Same as above V Position Low-Byte : Same as above V Position High-Byte : Same as above H Size Low-Byte : Same as above H Size High-Byte : Same as above V Size Low-Byte : Same as above V Size High-Byte : Same as above P.Source : Same as above TV Channel : Same as above S.Select : Same as above Country : Same as above ATV_DTV : Same as above CH_NUM High_Byte : Same as above CH_NUM Low_Byte : Same as above Sel_Minor : Same as above Minor_CH High_Byte : Same as above Minor_CH Low_Byte : Same as above

Set MagicNet PIP Off (Data in Red font is for model 460Txn) Command Data Length 0xE0 0x0C 0x13

PIP Off

Ack (Data in Red font is for model 460Txn) Command Data Length 0xFF 0x0E 0x15 Ack/Nak 'A' r-CMD 0xE0
Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0xE0 Val 1 ERR Check Sum

74) Panel ON/OFF

Function The Computer control ON/OFF status of Panel for TV/Monitor. Get Panel ON/OFF Status Command Data Length 0xF9 0
Set Panel ON/OFF Command Data Length 0xFData 1 Panel
Panel : Panel On/Off Code which will be set up into Monitor Panel On Panel Off
Ack Command Data Length 0xFF 3 Ack/Nak 'A' r-CMD 0xF9 Val 1 Panel Check Sum
Panel : Same as above Nak Command Data Length 0xFF 3 Ack/Nak 'N' r-CMD 0xF9 Val 1 ERR Check Sum