Monitor Assembly

2-2. 2-3. 3.
SyncMaster 510T / 510N / 512N
1. Monitor and Bottom 2. Monitor and Hanger

Pivot Stand

Attaching a base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.
Simple stand A. Monitor B. Mounting interface pad 1. 2. 3. 4.

Pivot stand

Turn off your monitor and unplug its power cord. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. Remove four screws and then remove the Stand from the LCD monitor. Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base.
When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions as appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. Internet web site : http://www.samsung.com/ (Worldwide) http://www.samsungusa.com/monitor (USA) http://www.sec.co.kr/monitor (Korea) http://www.samsungmonitor.com.cn/ (China)

Windows XP/2000

1. Insert CD into the CD-ROM drive. 2. Click "Windows XP/2000 Driver" 3. Choose your monitor model in the model list, then click the "OK" button.
4. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button.
This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samsung.com/. 5. Monitor driver installation is completed.
Windows XP | Windows 2000 | Windows NT | Linux
Microsoft Windows XP Operating System 1. Insert CD into the CD-ROM driver. 2. Click "Start" > "Control Panel" then click the "Appearance and Themes" Icon.
3. Click "Display" icon and choose the "Settings" tab then click "Advanced.".
4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
5. Click "Update Driver." and select "Install from a list or." then click "Next" button.
6. Select "Don't search ,I will." then click "Next" and then click "Have disk".
7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button.

8. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button.
This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samsung.com/ 9. Click the "Close" button then click "OK" button continually.
10. Monitor driver installation is completed. Microsoft Windows 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose "OK" button on the "Insert disk" window. 2. Click the "Browse" button on the "File Needed" window. 3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button. How to install

1. 2. 3. 4.

5. 6. 7. 8. 9. 10.
Click "Start" , "Setting" , "Control Panel". Double click the "Display" Icon. Choose the "Settings" tab and then click "Advanced.". Choose "Monitor". Case1: If the "Properties" button is inactive, it means your monitor is properly configured. Please stop installation Case2: If the "Properties" button is active, click the "Properties" button then follow next steps continually. Click "Driver" and then click on "Update Driver." then click on the "Next" button. Choose "Display a list of the known drivers for this device so that I can choose a specific driver" then click "Next" and then click "Have disk". Click the "Browse" button then choose A:(D:\Driver). Click the "Open" button, then click "OK" button. Choose your monitor model and click the "Next" button then click "Next" button. Click the "Finish" button then the "Close" button.
If you can see the "Digital Signature Not Found" window then click the "Yes"button. And click the "Finish" button then the "Close" button. Microsoft Windows NT Operating System 1. Click Start, Settings, Control Panel, and then double-click Display icon. 2. In Display Registration Information window, click Settings Tab and then click All Display Modes. 3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then click OK. 4. Click Apply button if you see the screen working normally after clicking Test. If the screen is not normal, change to a different mode (lower mode of resolution, colors or frequency). If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by referring to the Preset Display Modes in the user guide.

Menu Coarse

Description Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the Horizontal Control menu. Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). Follow these instuction to change the clearance of image. Follow these instructions to change the horizontal position of the monitor's entire display. Follow these instructions to change the vertical position of the monitor's entire display.

H-Position V-Position

Menu Image Reset Color Reset
Description Image parameters are replaced with the factory default values. Color parameters are replaced with the factory default values.

Overview

Install

OSD Mode

Color Calibration

Uninstall

Troubleshooting

What is MagicTune?

Monitor performance can vary due to the graphics card, host computer lighting conditions and other environmental factors. In order to get the best image on a monitor requires you to adjust it for your unique setting. Unfortunately, the manual controls available to tune the image often prove to be challenging. Proper adjustment (tuning) requires an easy to use program that goes through a step-by-step process to obtain the best overall picture quality. In most cases even simple adjustments to Brightness, or Contrast require navigation of the multi-level, onscreen display (OSD) menus that are not easy to understand. Furthermore, there is no feedback to assist in correctly setting the controls of the monitor. MagicTune is a software utility that guides you through the tuning process with easy to understand instructions and back ground patterns designed for each monitor control. The display settings for each user can be saved, providing an easy way to select display characteristics in a multiuser environment, or having a single user have multiple defined presets based on content and ambient lighting.

Basic Functionality

MagicTune is a software utility that allows monitor adjustment and color tuning using the Display Data Channel Command Interface (DDC/CI) protocol. All adjustments to the display are controlled via software to eliminate the need to use the monitor on-screen display (OSD). MagicTune supports Windows 98SE, Me, 2000, NT, XP Home, and XP Professional. MagicTune allows for quick accurate tuning of the display with the ability to easily save and use monitor configurations that are best suited for you.

If the power is on, reboot the computer to see the initial screen(the login screen), which can be seen.
Can you see "Not Optimum Mode" "Recommended mode 1280 x 1024 60Hz" on the screen?
You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can properly handle. Adjust the maximum resolution and frequency that the monitor can properly handle. If the display exceeds SXGA or 75Hz, a "Not Optimum Mode. Recommended mode 1280 x 1024 60Hz" message is displayed. If the display exceeds 85Hz, the display will work properly but the "Not Optimum Mode. Recommended mode 1280
x 1024 60Hz" message appears for one minute and then disappears. Please change to the recommended mode during this one-minute period. (The message is displayed again if the system is rebooted.) There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals? The monitor is in PowerSaver mode. press a key on the keyboard to activate the monitor and restore the image on the screen. If there is still no image, press the 'Source' button. Then press any key on the keyboard again to activate the monitor and restore the image on the screen. Connected using the DVI cable? You may get a blank screen if you boot the system before you connect the DVI cable, or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals. Connect the DVI cable and then reboot the system. Check the signal cable connection.Make sure the video card is fully inserted in it's slot. Reboot the computer.
The screen shows strange colors or just black and white.
Is the screen displaying only one color as if looking at the screen through a cellophane paper? Have the screen colors become strange after running a program or due to a crash between applications? Has the video card been set properly?
Set the video card by referring to the video card manual. Adjust screen image position and size using the OSD. Adjust the resolution and frequency at the video card. (Refer to the Preset Display Modes).
The screen suddenly has become unbalanced.
Have you changed the video card or the driver? Have you adjusted the resolution or frequency to the monitor?
The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD. The screen is out of focus or OSD cannot be adjusted. LED is blinking but no images on the screen. Have you adjusted the resolution or frequency on the monitor? Is the frequency properly adjusted when checking the Display Timing on the menu? Adjust the resolution and frequency of the video card. (Refer to the Preset Display Modes). Adjust the frequency properly by referring to the video card manual and the Preset Display Modes. (The maximum frequency per resolution may differ from product to product.) There are only 16 colors shown on the screen. The screen colors have changed after changing the video card. There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor Have the Windows colors been set properly? Windows ME/2000/XP: Set the colors properly at the Control Panel Display Settings. Set the video card by referring to the video card manual. Install the monitor driver according to the Driver Installation Instructions. Install the monitor driver according to the Driver Installation Instructions.

Self-Test Feature Check 1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer. 3. Turn on the monitor. If the monitor is functioning properly, you will see a box with a border and text inside as shown in the following illustration: The three boxes inside the border are red, green and blue.
Failure of any of the boxes to appear indicates a problem with your monitor. This box also appears during normal operation if the video cable becomes disconnected or damaged. 4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor. If your monitor screen remains blank after using the previous procedure, check your video controller and computer system; your monitor is functioning properly.
Warning Messages If there is something wrong with the input signal, a message appears on the screen or the screen goes blank although the power indicator LED is still on. The message may indicate that the monitor is out of scan range or that you need to check the signal cable.
Environment The location and the position of the monitor may influence the quality and other features of the monitor. 1. if there are any sub woofer speakers near the monitor, unplug and relocate the woofer to another room. 2. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the monitor.
Useful Tips A monitor recreates visual signals received from the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact a service center or your dealer. Judging the monitor's working condition If there is no image on the screen or a "Not Optimum Mode","Recommended mode 1280 x 1024 60Hz" message comes up, disconnect the cable from the computer while the monitor is still powered on. If there is a message coming up on the screen or if the screen goes white, this means the monitor is in working condition. In this case, check the computer for trouble.
Check List Is the power cord connected properly? Can you see "Check Signal Cable" on the screen? If the power is on, reboot the computer to see the initial screen(the login screen), which can be seen.

Have you installed the monitor driver? See the video card manual to see if the Plug & Play (VESA DDC) function can be supported.
1. check if the power cord and the video cables are properly connected to the computer. 2. Check if the computer beeps more than 3 times when booting. (If it does, request an after-service for the main board of the computer.) 3. If you installed a new video card or if you assembled the PC, check if the installed the adapter(video) driver and the monitor driver. 4. Check if the scanning ratio of the video screen is set at 75Hz. (Do not exceed 60Hz when using the maximum resolution.) 5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control PanelSystemDevice Administrator" and then reboot the computer to reinstall the adapter (video) driver.

General

General Model Name LCD Panel Size Display area Pixel Pitch Type Synchronization Horizontal Vertical Display Color 16,194,277 Colors Resolution Optimum resolution Maximum resolution Input Signal, Terminated RGB Analog , DVI(Digital Visual Interface) Compliant Digital RGB 0.7Vp-p Positive at 75 ohms Separate H/V sync, Composite sync, SOG, TTL level positive or negative. Maximum Pixel Clock 140 MHz Power Supply AC 90 ~ 264 VAC, 60/50 Hz 3Hz Signal Cable 15pin-to-15pin D-sub cable, detachable DVI-D to DVI-D connector, detachable Power Consumption 1280 x 1024@60 Hz 1280 x 1024@75 Hz 30 ~ 81 kHz 56 ~ 75 Hz 17" Diagonal 337.92 (H) x 270.336 (V) 0.264mm (H) x 0.264mm (V) a-si TFT active matrix SyncMaster 710T
Less than 34W Dimensions (WxDxH)/ Weight (Simple Stand) 370.0 x 60.3 x 316.0 mm (Without Stand) 370.0 x 175.0 x 381.0 mm (with Basic Stand) / 4.4kg Dimensions (WxDxH)/ Weight (Pivot Stand) 370.0 x 60.3 x 316.0 mm (Without Stand) 370.0 x 190.9 x 406.8 mm (with Basic Stand) / 5.8kg VESA Mounting Interface 100mm x 100mm (for use with Specialty(Arm) Mounting hardware.) Environmental considerations Operating Storage Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness. For example, the number of TFT LCD sub pixels that is contained in this product are 3,932,160. Note: Design and specifications are subject to change without prior notice. Temperature: 50F ~ 104F(10C ~ 40C) Humidity: 10% ~ 80%, non-condensing Temperature: -4F ~113F (-20C ~ 45C) Humidity: 5% ~ 95%, non-condensing

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature.
State Power Indicator Power Consumption
Normal Operation Green Less than 34W
Power saving mode EPA/ENERGY 2000 Green, Blinking Less than 1W (Off-mode)
Power off (Power button) Black Less than 1W (120Vac/220 Vac)
Power off (Power Switch) (option) Black Less than 0W
This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1. Preset Timing Modes Display Mode IBM, 640 x 350 IBM, 640 x 480 IBM, 720 x 400 MAC, 640 x 480 MAC, 832 x 624 MAC, 1152 x 870 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1152 x 864 VESA, 1280 x 1024 VESA, 1280 x 1024 Horizontal Frequency (kHz) 31.469 31.469 31.469 35.000 49.726 68.681 37.500 37.861 35.156 37.879 46.875 48.077 48.363 56.476 60.023 67.500 63.981 79.976 Vertical Frequency (Hz) 70.086 59.940 70.087 66.667 74.551 75.062 75.000 72.809 56.250 60.317 75.000 72.188 60.004 70.069 75.029 75.000 60.020 75.025 Pixel Clock (MHz) 25.175 25.175 28.322 30.240 57.284 100.00 31.500 31.500 36.000 40.000 49.500 50.000 65.000 75.000 78.750 108.00 108.00 135.00 Sync Polarity (H/V) +/-/-/+ -/-/-/-/-/-/+/+ +/+ +/+ -/-/+/+ +/+ +/+ +/+

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature. Power saving mode EPA/ENERGY 2000 Green, Blinking Less than 1W (Off-mode)
Power Switch off Black Less than 1W(120Vac/220 Vac)
General Model Name LCD Panel Size Display area Pixel Pitch Type Synchronization Horizontal Vertical Display Color 277 Resolution Optimum resolution Maximum resolution Input Signal, Terminated RGB Analog 0.7Vp-p Positive at 75 ohms Separate H/V sync, Composite sync, SOG, TTL level positive or negative. Maximum Pixel Clock 140 MHz Power Supply AC 90 ~ 264 VAC, 60/50 Hz 3Hz Signal Cable 15pin-to-15pin D-sub cable, detachable Power Consumption Less than 38W 1280 x 1024@60 Hz 1280 x 1024@75 Hz 30 ~ 81 kHz 56 ~ 75 Hz 19" Diagonal 376.32 (H) x 301.056 (V) 0.294mm (H) x 0.294mm (V) a-si TFT active matrix SyncMaster 910N / 912N
Dimensions (WxDxH)/ Weight (Simple Stand) 416.6 x 60.2 x 349.4 mm (Without Stand) 416.6 x 195.7 x 424.6 mm(with Basic Stand) / 5.6 kg Dimensions (WxDxH)/ Weight (Pivot Stand) 416.6 x 60.2 x 349.4 mm (Without Stand) 416.6 x 190.9 x 423.4 mm(with Basic Stand) / 7.2 kg VESA Mounting Interface 100mm x 100mm (for use with Specialty(Arm) Mounting hardware.) Environmental considerations Operating Storage Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness. For example, the number of TFT LCD sub pixels that is contained in this product are 3,932,160. Note: Design and specifications are subject to change without prior notice. Temperature: 50F ~ 104F(10C ~ 40C) Humidity: 10% ~ 80%, non-condensing Temperature: -4F ~113F (-20C ~ 45C) Humidity: 5% ~ 95%, non-condensing

Power Switch off Black Less than 1W(120Vac)
General Model Name LCD Panel Size Display area Pixel Pitch Type Synchronization Horizontal Vertical Display Color 16,194,277 Colors Resolution Optimum resolution Maximum resolution Input Signal, Terminated RGB Analog , DVI(Digital Visual Interface) Compliant Digital RGB 0.7Vp-p Positive at 75 ohms Separate H/V sync, Composite sync, SOG, TTL level positive or negative. Maximum Pixel Clock 81 MHz Power Supply AC 90 ~ 264 VAC, 60/50 Hz 3Hz Signal Cable 15pin-to-15pin D-sub cable, detachable DVI-D to DVI-D connector, detachable Power Consumption 1024 x 768@60 Hz 1024 x 768@75 Hz 30 ~ 61 kHz 56 ~ 75 Hz 15" Diagonal 304.1 (H) x 228.1 (V) 0.297 (H) x 0.297 (V) a-si TFT active matrix SyncMaster 510T
Less than 25W Dimensions (WxDxH)/ Weight 338.0 X 56.3 X 272.0 mm (Without Stand) 338.0 X 175.0 X 337.0 mm (with Basic Stand) / 3.0kg VESA Mounting Interface 75mm x 75mm (for use with Specialty(Arm) Mounting hardware.) Environmental considerations Operating Storage Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness. For example, the number of TFT LCD sub pixels that is contained in this product are 2,359,296. Note: Design and specifications are subject to change without prior notice. Temperature: 50F ~ 104F(10C ~ 40C) Humidity: 10% ~ 80%, non-condensing Temperature: -4F ~113F (-20C ~ 45C) Humidity: 5% ~ 95%, non-condensing
Normal Operation Green Less than 25W
Power Switch off Black Less than 1W/1.5W(110Vac/220 Vac)
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.

For Better Display

1. Adjust computer resolution and screen injection rate (refresh rate) oncomputer as described below to enjoy the best quality of picture. You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT-LCD. Resolution: 1024 X 768 / 1280 x 1024 Vertical frequency (refresh rate): 60 Hz 2. TFT LCD panel manufactured by using advanced semiconductor technology with precision of
1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness. For example, the number of TFT LCD sub pixels that is contained in this product are 2,359,296 / 3,932,160. 3. When you clean the monitor and the panel outside, please apply the recommended small amount of cleaner by using soft and dry cloth and polish it. Let LCD area not to be forced but to be scrubbed out softly. If excessive force is applied, you can have a stain on it. 4. If you are not satisfied with the quality of picture, you can get better quality of picture by executing "auto adjustment function" in display screen that is appeared as window termination button is pressed. If there's still noise after automatic adjustment, use FINE/COARSE adjustment function. 5. If you view a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time.

Authority

Information in this document is subject to change without notice. 2005 Samsung Electronics Co., Ltd. All rights reserved. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR Partner, Samsung Electronics Co., Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners.
Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPMS and DDC are registered trademarks of Video Electronics Standard Association; the ENERGY STAR name and logo are registered trademarks of

Congratulations! You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. This product meets the requirements for the TCO'99 scheme which provides for an international environmental and quality labelling labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO(The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen(The Swedish Society for Nature Conservation), Statens Energimyndighet(The Swedish National Energy Administration) and SEMKO AB. The requirements cover a wide range of issuse: environment, ergonomics, usability, reduction of electric and magnetic fields, energy consumption and electrical safety. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. The main problem, as far as computers and other electronics equipment are concerned, is that environmentally harmful substances are used both in the products and during their manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most of these potentially damaging substances sooner or later enter nature. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions, radioactive waste), it is vital to save energy. Electronics equipment in offices is often left running continuously and thereby consumes a lot of energy. What does labelling involve? The environmental demands has been developed by Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation). These demands impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs(freons) and chlorinated solvents, among other things. The product must be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to in each country where the company implements its operational policy. The energy requirements include a demand that the computer and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the computer shall be reasonable for the user. Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-Stockholm, Sweden Fax: +07 Email (Internet): development@tco.se Current information regarding TCO'99 approved and labelled products may also be obtained

via the Internet, using the address: http://www.tco-info.com/ Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive damage in fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur. The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since no substitutes are available. Cadmium** Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO'99 requirement states that batteries, the colour-generating layers of display screens and the electrical or electronics components must not contain any cadmium. Mercury** Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in high doses. The relevant TCO'99 requirement states that batteries may not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit. There is however one exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as today there is no commercially available alternative. TCO aims on removing this exception when a Mercury free alternative is available. CFCs (freons) The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the manufacture and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on earth of ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence. Lead** Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system and in higher doses, causes lead poisoning. The relevant TCO'99 requirement permits the inclusion of lead since no replacement has yet been developed.

TCO'03-Ecological requirements for personal computers (TCO'03 applied model only)
Congratulations! The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO'03 Display requirements: Ergonomics Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability.
Energy Energy-saving mode after a certain time ?beneficial both for the user and the environment Electrical safety Emissions Electromagnetic fields Noise emissions Ecology The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO Restrictions on o chlorinated and brominated flame retardants and polymers o heavy metals such as cadmium, mercury and lead. The requirements included in this label have been developed by TCO Development in cooperation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, Please visit

www.tcodevelopment.com

TCO'03 Recycling Information (TCO'03 applied model only) For recycling information for TCO'03 certified monitors, for the residents in the following countries, please contact the company corresponding to your region of residence. For those who reside in other countries, please contact a nearest local Samsung dealer for recycling information for the products to be treated in environmentally acceptable way.

MJ15AS*/MJ17AS*/MJ19AS*/ MJ15BS*/MJ17BS*/MJ19BS*
1-2 Servicing Precautions
WARNING: Caution: Note: An electrolytic capacitor installed with the wrong polarity might explode. Before servicing units covered by this service manual, read and follow the Safety Precautions section of this manual. If unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions, always follow the safety precautions.
1-2-1 General Servicing Precautions
1. Always unplug the units AC power cord from the AC power source and disconnect the DC Power Jack before attempting to: (a) remove or reinstall any component or assembly, (b) disconnect PCB plugs or connectors, (c) connect a test component in parallel with an electrolytic capacitor. Some components are raised above the printed circuit board for safety. An insulation tube or tape is sometimes used. The internal wiring is sometimes clamped to prevent contact with thermally hot components. Reinstall all such elements to their original position. After servicing, always check that the screws, components and wiring have been correctly reinstalled. Make sure that the area around the serviced part has not been damaged. 4. Check the insulation between the blades of the AC plug and accessible conductive parts (examples: metal panels, input terminals and earphone jacks). Insulation Checking Procedure: Disconnect the power cord from the AC source and turn the power switch ON. Connect an insulation resistance meter (500 V) to the blades of the AC plug. The insulation resistance between each blade of the AC plug and accessible conductive parts (see above) should be greater than 1 megohm. 6. Always connect a test instruments ground lead to the instrument chassis ground before connecting the positive lead; always remove the instruments ground lead last.
1-3 Electrostatically Sensitive Devices (ESD) Precautions
Some semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly called Electrostatically Sensitive Devices (ESD). Examples of typical ESD are integrated circuits and some field-effect transistors. The following techniques will reduce the incidence of component damage caused by static electricity. 1. Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from your body by touching a known earth ground. Alternatively, wear a discharging wriststrap device. To avoid a shock hazard, be sure to remove the wrist strap before applying power to the monitor. After removing an ESD-equipped assembly, place it on a conductive surface such as aluminum foil to prevent accumulation of an electrostatic charge. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ESDs. Use only a grounded-tip soldering iron to solder or desolder ESDs. Use only an anti-static solder removal device. Some solder removal devices not classified as anti-static can generate electrical charges sufficient to damage ESDs. 8. 6. Do not remove a replacement ESD from its protective package until you are ready to install it. Most replacement ESDs are packaged with leads that are electrically shorted together by conductive foam, aluminum foil or other conductive materials. Immediately before removing the protective material from the leads of a replacement ESD, touch the protective material to the chassis or circuit assembly into which the device will be installed.

TFT-LCD panel, RGB vertical stripe, normally black transmissive, 19-Inch viewable, 0.297 (H) x 0.297 (V) mm pixel pitch Horizontal : 31 kHz ~ 61 kHz (Automatic) Vertical : 55 Hz ~ 76 Hz 16.2 Million colors Horizontal : 1280 Pixels Vertical : 1024 Pixels Analog, 0.7 Vp-p 5% positive at 75 , internally terminated Type : Separate H/V sync, Composite H/V Level : TTL level (V high 2.0 V, V low 0.8 V), Sync-on-Green ( 0.25 V) 135 MHz 376.32 mm 3 mm / 301.056 mm 3 mm AC 90 ~ 264 Volts, 60/50 Hz 3Hz 38W (normal) Simple Stand 16.4 x 2.4 x 13.8 Inches (416.6 x 60.2 x 349.4 mm) State of stand disassembled 16.4 x 7.7 x 16.7 Inches (416.6 x 195.7 x 424.6 mm) State of stand installed 20.0 x 5.9 x 19.4 Inches (509 x 150 x 494 mm) 5.85 kg (12.9 lbs) / 7.8 kg (17.2 lbs) Pivot Stand 16.4 x 2.4 x 13.8 Inches (416.6 x 60.2 x 349.4 mm) State of stand disassembled 16.4 x 7.5 x 16.7 Inches (416.6 x 190.9 x 423.4 mm) State of stand installed 21.1 x 9.4 x 17.4 Inches (535 x 238 x 443 mm) 7.30 kg (16.1 lbs) / 9.1 kg (20.1 lbs)

2-3 Pin Assignments

Sync Type Pin No. 15 Separate Red Green Blue GND DDC Return (GND) GND-R GND-G GND-B DDC Power Input (+5V) Self Raster GND Bi-Dr Data (SDA) H-Sync. V-Sync. DDC Clock (SCL) 15-Pin D-Sub Signal Cable Connector Composite Red Green Blue GND DDC Return (GND) GND-R GND-G GND-B DDC Power Input (+5V) Self Raster GND Bi-Dr Data (SDA) H/V-Sync. Not Used DDC Clock (SCL) Sync-on-green Red Green + H/V Sync. Blue GND DDC Return (GND) GND-R GND-G GND-B DDC Power Input (+5V) Self Raster GND Bi-Dr Data (SDA) Not Used Not Used DDC Clock (SCL)
Sync Type Pin No. Rx2Rx2+ GND No Connection No Connection DDC Clock (SCL) DDC Data (SDA) NC Rx1Rx1+ NC No Connection
24P DVI-D No Connection +5V_M Self Raster +5V_M Rx0Rx0+ NC No Connection No Connection NC RxC+ RxC-

2-4 Timing Chart

This section of the service manual describes the timing that the computer industry recognizes as standard for computer-generated video signals. Table 2-1 Timing Chart Mode

VGA2/ 70 Hz

VGA3/ 60 Hz 640 x 480
VESA(MJ17AS*/MJ17BS*/ VESA MJ19AS*/MJ19BS*) (MJ15AS*/MJ15BS*/MJ17AS*/MJ17BS*/MJ19AS*/MJ19BS*)
640/75 Hz 640 x 480 800/60 Hz 800 x 600 800/75 Hz 800 x 600 1024/60 Hz 1024 x 768 1024/75 Hz 1280/60 Hz 1280/75 Hz 1024 x x x 1024
Timing fH (kHz) A sec B sec C sec D sec E sec fV (Hz) O msec P msec Q msec R msec S msec Clock Freq. (MHz) Polarity H.Sync V.Sync Remark

720 x 400

31.469 31.777 3.813 1.589 26.058 0.318 70.087 14.268 0.064 0.858 13.155 0.191 28.322
31.469 31.778 3.813 1.589 26.058 0.318 59.940 16.683 0.064 0.794 15.761 0.064 26.175
37.500 26.667 2.032 3.810 20.317 0.508 75.000 13.333 0.080 0.427 12.800 0.027 31.500
37.879 26.400 3.200 2.200 20.000 0.000 60.317 16.579 0.106 0.607 15.840 0.0261 40.000
46.875 21.333 1.616 3.232 16.162 0.323 75.000 13.333 0.064 0.448 12.800 0.021 49.500
48.363 20.677 2.092 2.462 15.754 0.369 60.004 16.666 0.124 0.600 15.880 0.062 75.000
60.023 16.660 1.219 2.235 13.003 0.203 75.029 13.328 0.050 0.466 12.795 0.017 78.750
63.981 11.852 1.037 2.296 9.259 0.000 60.020 16.005 0.047 0.594 15.630 0.016 108.000
79.975 12.504 1.067 1.837 9.481 0.119 75.025 13.329 0.038 0.475 12.804 0.013 135.000
Negative Positive Separate
Negative Negative Separate
Positive Positive Separate

Separate Sync

Horizontal

Video Video

H/V Composite Sync

A Q Vertical P

RR S S

VIDEO R

Vertical

Video Video DD E E

Horizontal B

Sync-on-Green

Sync Sync B B AA Sync Sync
Green Horizontal P B Q O R S
A : Line time total C : Back porch E : Front porch 2-4
B : Horizontal sync width D : Active time
O : Frame time total Q : Back porch S : Front porch
P : Vertical sync width R : Active time
3 Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the MJ15AS*/MJ17AS*/MJ19AS*/MJ15BS*/MJ17BS*/MJ19BS* TFT-LCD monitors. WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling these components.

3-1 Disassembly

Cautions:1. Disconnect the monitor from the power source before disassembly. 2. Follow these directions carefully; never use any metal instrument except provided jig to separate the cabinet. 3. R/Cover opening jig : BH81-00001A 1. Place monitor face down on cushioned table. Remove 4 screws from grip on the stand and remove the stand. Remove 2 screws from the rear cover.

2. Insert the opening stand into the grooves at a hole and press until it clicks and lift the rear cover.
3. Remove 2 screws from the shield.
4. Disconnect function cable from the cover front and lift up the panel. Remove 4 screws from the panel shield. (Right / Left)
5. Lift up the panel shield and carefully remove the silicon glue on the cables with a nipper. ! Caution : Lamp wire may be easily damaged. Please use caution when removing the silicon.
3 Disassembly and Reassembly 6. Remove 7 screws, 4 hexa screws from the boards and lift up the boards. ! Caution : When repairing panel only, disconnect just LVDS cable, Panel-Lamp / Wire marked in circle in the picture without removing the screws on board in order to lift the board up. 7. This picture is panel.

3-2 Reassembly

Reassembly procedures are in the reverse order of disassembly procedures.
4 Alignments and Adjustments
This section of the service manual explains how to use the RS232 JIG. This function is needed for AD board change and program memory (IC110) change.

4-1 Required Equipment

The following equipment is necessary for adjusting the monitor: Computer with Windows 95, Windows 98, or Windows NT. MTI-2031 DDC MANAGER JIG
4-2 Automatic Color Adjustment
To input video, use 16 gray or any pattern using black and white. 1. Select english for OSD language. 2. Press the (Enter/Source) key for 5 seconds.

4-3 DDC EDID Data Input

1. Input DDC EDID data when replacing AD PCB. 2. Receive/Download the proper DDC file for the model from HQ quality control department. Install the below jig (Figure 1) and enter the data.

Figure 1.

4-4 OSD Adjustment When Replacing Panel
1. Adjust brightness and contrast to 0. Then, press the (Enter/Source) key for 5 second. Service function OSD will appear on screen. 2. Press the + key to place the cursor on the panel. Press the menu key for 5 seconds.
4-5 OSD Adjustment When Replacing Lamp Only
1. Adjust brightness and contrast to 0. Then, press the exit key for 5 seconds. Service function OSD will appear on the screen. 2. Press the + key. Select upper lamp and press the menu key for 5 seconds. Then, select lower lamp and press the menu key for 5 seconds.
: Please be sure to read the following instructions for details on service function. 4-1
4-6 Service Function Spec.
4-6-1 How to Display Service Function OSD
1. The value for brightness and contrast should be changed to zero. 2. Within 5 seconds, press the (Enter/Source) key. 3. Service function OSD will be displayed.
If you want to disable the service function OSD, you will have to power off.

Panel Information

Softward Version Checksum Figure 2. The example of service function OSD The service function OSD is based on a grid of 29 columns x 12 rows. The service function OSD consists of panel information, software version and MICOM checksum.

4-6-2 How to Control Service Function OSD
1. With the panel selected on OSD, whenever you press the right key, the base color will change to blue from Panel to Upper Lamp, Lower Lamp.

Figure 3.

4-6-3 How to Control Service Function OSD
After change the panel or lamp, you must reset service function OSD. The case of panel change After changeing the panel, press the menu key within 5 seconds,. Then, panel Ch. No increases one step and the panel time information is reset to zero. Simultaneously, other information is reset to zero (Upper/Lower lamp, Panel cycle).

Figure 4.

4-6-4 How to Control Service Function OSD
In the case of Upper Lamp or Lower Lamp change After changeing the Upper Lamp or Lower Lamp, 1. Select the Upper Lamp or Lower Lamp 2. Press the Menu key within an 5 seconds. Then, Ch. No and time will be reset to zero (selected item only).

Figure 5, 6.

5 Troubleshooting
Notes: 1. Before troubleshooting, setup the PCs display as below. Resolution: 1024 x 768 H-frequency: 61 kHz V-frequency: 75 Hz 2. If no picture appears, make sure the power cord is correctly connected. 3. Check the following circuits. No raster appears: Function PBA, Main PBA, I/D PBA 5V develop but no screen: Main PBA 5V does not develop: I/D PBA 4. If you push and hold the (Enter, Source) button for more than 5 seconds, the monitor automatically returns to the factory preset.
5-1-1 No Power (MJ15A*/MJ15B*)
Yes When Pin 4 of CN600 is 0V does proper DC 13V, 5V appear at Pin 1, 2 and 6, 7 of CN600 separately? Yes When Pin 3 of IC602 is DC 5V does proper DC 3.3V appear at Pin 4 of IC602? Yes When Pin 4 of IC600 is DC 5V does proper DC 3.3V appear at Pin 5 and 6 of IC600? Yes When Pin 2, 3 of IC601 is DC 3.3V does proper DC 4.3V appear at Pin 1 of IC601? Yes When Pin 2, 3 of IC601 is DC 4.3V does proper DC 2.5V appear at Pin 4 of IC601? No No No No

Check Function Assy.

Change IP Board.
Check IC602 and related circuit.
Check IC600 and related circuit.
Check IC601 and related circuit.
* 0V means power on state. When the monitor work well except DPMS and power switch off, 0V should be applied to number 4 of CN600. MJ15AS*/MJ17AS*/MJ19AS*/ MJ15BS*/MJ17BS*/MJ19BS* 5-1

7 Electrical Parts List
You can search for updated part codes through ITSELF web site. URL : http://itself.sec.samsung.co.kr/
7-1-1 MJ15AS* Main PCB Parts
Level 5 Loc. No. MJ15AS E27-MJ15AS BN94-00527D 0204-002420 0204-002426 3701-001219 3711-004712 6003-000117 6003-000117 BN97-00354K 0903-001347 BN82-00114L BN97-00358T 3301-000314 3301-000314 3301-000314 3301-000314 3301-000314 3301-000314 2703-001334 3301-000314 3301-000314 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-000257 2203-005005 2203-005005 2203-005005 2203-000236 2203-000998 2203-005005 2203-005437 2203-005005 2203-005437 2203-005065 2203-000257 2203-000257 2203-000189 2203-005005 2402-001042 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-000426 2203-000257 2203-000426 2203-005005 2203-005005 2203-005005 2402-000108 Code No. CIS3 CIS4 CN101 CN600 IP/PCB+BRKT/PCB M/PCB+BRKT/PCB MICOM IC200 CIS BD100 BD101 BD102 BD103 BD104 BD105 BD106 BD200 BD201 C100 C101 C102 C103 C104 C105 C106 C110 C112 C114 C116 C117 C200 C201 C203 C205 C206 C221 C222 C224 C400 C401 C402 C403 C404 C405 C406 C407 C408 C409 C410 C411 C412 C413 C414 C415 C416 C417 C418 C419 C420 C421 CASSY PCB MAIN SOLVENT FLUX CONNECTOR-DSUB CONNECTOR-HEADER SCREW-TAPTITE SCREW-TAPTITE ASSY MICOM IC-MICROCONTROLLER A/S MICOM ASSY SMD BEAD-SMD BEAD-SMD BEAD-SMD BEAD-SMD BEAD-SMD BEAD-SMD INDUCTOR-SMD BEAD-SMD BEAD-SMD C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-AL,SMD C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-AL,SMD Description SEC,LTM150XO-L01 MJ15AS 1M-1000,C3H70H,96,-,DF-201TVS,MIX,0.820,FLUX13%,14KG,15P,3R,FEMALE,ANGLE,AUF BOX,9P,1R,2mm,STRAIGHT,SN BH,+,B,M3,L6,ZPC(YEL),SWRCH18A BH,+,B,M3,L6,ZPC(YEL),SWRCH18A GS17VS NT68F63GL,8Bit,PLCC,44P,653MIL,12MHz,ST,-,PLASTIC,5.000000V,-,-0to+70C,256B,-,-, GS17VS MJ15AS 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 1.5uH,10%,2012 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 10nF,10%,50V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 0.1NF,5%,50V,C0G,TP,1608 0.047NF,5%,50V,C0G,TP,1608 100nF,10%,16V,X7R,TP,1608 10000nF,+80-20%,10V,Y5V,TP,3216 100nF,10%,16V,X7R,TP,1608 10000nF,+80-20%,10V,Y5V,TP,3216 1000nF,+80-20%,10V,Y5V,-,1608 10nF,10%,50V,X7R,TP,1608 10nF,10%,50V,X7R,TP,1608 100nF,+80-20%,25V,Y5V,TP,1608, 100nF,10%,16V,X7R,TP,1608 100uF,20%,16V,GP,TP,6.6x6.6x5.4mm 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 0.018NF,5%,50V,C0G,TP,1608 10nF,10%,50V,X7R,TP,1608 0.018NF,5%,50V,C0G,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 10uF,20%,16V,WT,TP,4.3x4.3x5.4 Specification Remarks SNA SNA SNA SA SA SNA SNA SA SNA SNA SNA SNA SNA SNA SNA SNA SNA SA SNA SNA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA

Level 5 5

Loc. No. 2203-005005 2203-005005 2203-005065 2203-005005 2203-005005 2203-005065 2402-001042 2203-005005 2402-001042 2203-005005 2402-001042 2402-001042 3711-005543 3711-005470 0403-001411 0401-001056 0401-001056 0401-001056 0402-001080 0406-001061 1103-001023 1003-001674 0505-001772 1203-003209 1203-001293 BN41-00412A 0501-002080 2007-000821 2007-001164 2007-001164 2007-001164 2007-001164 2703-001334 2007-001164 2703-001334 2007-000084 2007-000090 2007-000078 2007-000113 2007-000113 2007-000113 2007-000113 2007-000113 2007-000113 2007-000070 2007-000090 2007-000090 2007-000084 2007-000084 2007-000084 2007-000084 2007-000084 2007-000084 2007-000084 2007-000084 2007-000084 2007-000090 2007-000084 2007-000084 2007-000084 2007-000077 2007-000080 2007-000074 2007-000074 2007-000074 2007-000074 2007-000070 2007-000074 2007-000074 2007-000074 2007-000074 2007-000074 2007-000083 2007-000074 2007-000074 2007-000074
CodeNo. C423 C424 C603 C604 C605 C606 C607 C608 C609 C610 C611 C612 CN200 CN400 D100 D101 D103 D105 D600 IC106 IC201 IC400 IC600 IC601 IC602 MP1.0 Q601 R106 R107 R108 R109 R118 R119 R120 R121 R122 R123 R124 R134 R135 R136 R137 R138 R139 R200 R202 R203 R204 R205 R206 R207 R208 R209 R210 R211 R212 R214 R216 R217 R219 R221 R222 R223 R224 R225 R226 R227 R228 R229 R230 R231 R232 R233 R234 R235 R236
Description C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-AL,SMD C-CER,CHIP C-AL,SMD C-CER,CHIP C-AL,SMD C-AL,SMD CONNECTOR-HEADER CONNECTOR-HEADER DIODE-ZENER DIODE-SWITCHING DIODE-SWITCHING DIODE-SWITCHING DIODE-RECTIFIER DIODE-TVS IC-EEPROM IC-LCD CONTROLLER FET-SILICON IC-DUAL VOLTAGE REGULATOR IC-POSI.FIXED REG. PCB MAIN TR-SMALL SIGNAL R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP INDUCTOR-SMD R-CHIP INDUCTOR-SMD R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP
Specification 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 1000nF,+80-20%,10V,Y5V,-,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 1000nF,+80-20%,10V,Y5V,-,1608 100uF,20%,16V,GP,TP,6.6x6.6x5.4mm 100nF,10%,16V,X7R,TP,1608 100uF,20%,16V,GP,TP,6.6x6.6x5.4mm 100nF,10%,16V,X7R,TP,1608 100uF,20%,16V,GP,TP,6.6x6.6x5.4mm 100uF,20%,16V,GP,TP,6.6x6.6x5.4mm BOX,6P,1R,1.25mm,SMD-A,SnPb,IVR BOX,30P,1R,1.25mm,SMD-A,Sn+Pb,IVR -,5.49-5.73V,200MW,SOD-323,TP MMBD4148SE,100V,200MA,SOT-23,TP MMBD4148SE,100V,200MA,SOT-23,TP MMBD4148SE,100V,200MA,SOT-23,TP GF1G,400V,1A,DO,TP MMQA5V6T3,5.32/5.6/5.88V,24W,S 24C08,1Kx8,SOP,8P,5x4mm,2.5/5.5V,0to+70C SE7889,PQFP,100P,23.45x17.45mm,-,-,TR,PLASTIC,0.3-3.6V,0to+70C,-,-,FDS9933A,P,-20V,-3.8A,0.075OHM,2W,SO-8 APL5522,SOP,8P,4.9x3.9mm,PLASTIC,3.3V/2.5V,-,0to+150C,500mA/300mA,-,TP 033,T0-252,3P,6.5MIL,PLASTIC,3 MJ/GS,SILVER THROGH HOLE,2L,1.0,1.6T,118*78.2,4A 2SC2412K,NPN,200mW,SC-59,TP,120-270 390ohm,1%,1/10W,TP,1608 75ohm,1%,1/10W,TP,1608 75ohm,1%,1/10W,TP,1608 75ohm,1%,1/10W,TP,1608 75ohm,1%,1/10W,TP,1608 1.5uH,10%,2012 75ohm,1%,1/10W,TP,1608 1.5uH,10%,2012 4.7Kohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 1Kohm,5%,1/10W,TP,1608 33ohm,5%,1/10W,TP,1608 33ohm,5%,1/10W,TP,1608 33ohm,5%,1/10W,TP,1608 33ohm,5%,1/10W,TP,1608 33ohm,5%,1/10W,TP,1608 33ohm,5%,1/10W,TP,1608 0ohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 470ohm,5%,1/10W,TP,1608 2Kohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 0ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 3Kohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608

Remarks SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SNA SA SA SA SNA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA

Level 3 3

Loc. No. 2007-000074 2007-000084 2007-000074 2007-000074 2007-000078 2007-000074 2007-000077 2007-000090 2007-000074 2007-000090 2007-000090 2007-000078 2007-000821 2007-000070 2007-000070 2007-000090 2007-000090 2007-000074 2007-000090 2801-003773 0403-001411 0403-001411 0403-001411 0403-001411 0403-001411 0403-001411 BN90-00486D BN96-01063A 6003-000269 6003-001086 BN61-00822A BN61-00825A BN61-00826A BN96-01061A BN90-00640L 6003-001086 BN96-01052B 6003-000282 BN63-01206A BN64-00257A BN67-00120A BN96-01111A BN90-00641E 6003-000337 BN96-01053B BN61-00379A BN63-01207B BN91-00403W BN07-00164A BN91-00784U BN44-00107B BN61-01068A
Code No. R237 R238 R239 R240 R241 R242 R243 R244 R247 R400 R401 R402 R403 R502 R503 R600 R602 R603 R604 X400 ZD100 ZD101 ZD102 ZD103 ZD104 ZD200 STD STD STD STD STD STD STD C/F+C/R C/F C/F C/F C/F C/F C/F C/R+STD C/R C/R C/R LCD CIS CIS
Description R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP CRYSTAL-SMD DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER ASSY STAND ASSY STAND P-SIMPLE SCREW-TAPTITE SCREW-TAPTITE STAND-BRKT HINGE STAND-FRONT STAND-REAR ASSY MISC P-HINGE ASSY COVER FRONT SCREW-TAPTITE ASSY COVER P-FRONT SCREW-TAPTITE COVER-FRONT KNOB-FUNCTION LENS-LED ASSY BOARD P-FUNCTION ASSY COVER REAR SCREW-TAPTITE ASSY COVER P-REAR BRACKET-STAND VESA COVER-REAR ASSY LCD-E27 LCD-PANEL ASSY CHASSIS IP BOARD BRACKET-PCB
Specification 100ohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 1Kohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 470ohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 1Kohm,5%,1/10W,TP,1608 390ohm,1%,1/10W,TP,1608 0ohm,5%,1/10W,TP,1608 0ohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 12MHZ,30PPM,28-AAN,20PF,50OHM,TP -,5.49-5.73V,200MW,SOD-323,TP -,5.49-5.73V,200MW,SOD-323,TP -,5.49-5.73V,200MW,SOD-323,TP -,5.49-5.73V,200MW,SOD-323,TP -,5.49-5.73V,200MW,SOD-323,TP -,5.49-5.73V,200MW,SOD-323,TP MJ17BS/GS17VT/GS17MS,EDC MJ15/17ASBS,ABS HB,BK07 BH,+,S,M3,L6,ZPC(YEL),SWRCH18A BH,+,B,M3,L12,ZPC(BLK),SWRCH18A GS17VS,SECC,T1.2 GS17VS,ABS HB,BK07 GS17VS,ABS HB,BK07 MJ15-17AS/BS,ZNDC2 MJ15AS BH,+,B,M3,L12,ZPC(BLK),SWRCH18A MJ15*S,ABS HB,GR70,SILVER SPRAY BH,+,B,M3,L8,ZPC(BLK),SWCH10 MJ15*S,ABS HB,GR70,SILVER MJ17AS/BS,ABS+PC,HB,GR70 MATISSE,ACRYL,CLEAR MATISSE,FUNCTION MJ15AS BH,+,S,M4,L10,ZPC(BLK),SWRCH18 MJ15*S,ABS HB,BK07 GOYA153S,SECC,T2.0,,,, MJ15AS,ABS HB,BK07,NONE,1.5 MJ15BS LTM150XO-L01,Matisse,6 BIT,326.5*253.5*12,16.2M,40,0.297*0.297,0~50,3.3V,TN GY17HS DAC-12M001B,MT15,4.5mA,8.0mA,48KHZ,2,90V/264VAC,+13V/+5V,0 to +40,-20 to +60,50/ MJ15AS,SECC,T1.0

Remarks SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SA SNA SNA SNA SNA SNA SNA SNA SA SNA SNA

7-1-2 MJ15AS* Others

Level Loc. No. BN91-00785H 0203-001598 6001-000125 6003-000117 BN39-00244A BN39-00507A BN39-00523B BN96-01058A BN92-00709A BN68-00614A BN92-00809Q BN96-01108A 6003-001185 6009-001442 6902-000110 6902-000336 BH68-20366B BN61-00048A BN61-00821A BN61-00824A BN61-01167A BN68-00473P BN96-01154V 0203-000214 3903-000042 6902-000110 BH68-70438A BH68-70448A BN96-01171A BH68-00376L BN59-00420A BN92-00982J 0203-001100 6902-000379 6902-000520 6902-000604 6902-000609 BH69-00457B BH69-40321A BN68-00129A BN69-00140R BN69-00140W BN69-00617J BN69-00739A BN92-01043C BH68-00329C BN69-00760A E28-MJ15AS Code No. CIS SH/COV+PAN SH/COV+BRKT/PCB CIS CIS CIS CIS LABEL ACCESSORY STAND/BASE STAND/BASE STAND/BASE STAND/BASE STAND/BASE STAND/BASE STAND/BASE STAND/BASE STAND/BASE STAND/BASE UNIT/ACCESSORY ACCESSORY ACCESSORY ACCESSORY ACCESSORY ACCESSORY ACCESSORY CIS CIS P/M P/M P/M P/M P/M P/M P/M P/M P/M P/M P/M P/M BOX BOX Description ASSY SHIELD TAPE-FILAMENT SCREW-MACHINE SCREW-TAPTITE CBF SIGNAL LEAD CONNECTOR LEAD CONNECTOR ASSY MISC P-SHIELD COVER ASSY LABEL LABEL RATING-00 ASSY ACCESSORY ASSY STAND P-BASE SCREW-TAPTITE SCREW-SPECIAL BAG PE BAG ZIPPER LABEL-00,STANDE BASE FOOT-RUBBER STAND-HOLDER STAND-BASE BRACKET-BASE/SUPPORT MANUAL INSTALL ASSY ACCESSORY TAPE-OPP MASKING CBF-POWER CORD BAG PE CARD-BLOC WARRANTY-09 CARD-01 ASSY MANUAL P-IB+QSG MANUAL-01 S/W DRIVER-00,IB ASSY P/MATERIAL TAPE-OPP MASKING BAG AIR BAG PE BAG WRAPPING BAG ROLL PACKING-PAD BOTTOM PACKING-PAD LABEL SHIPPING PAD-PALLET COVER PAD PACKING PALLET-PACKING CUSHION ASSY BOX LABEL BAR CODE-02 BOX-Specification MJ15BS/GS15MS/MJ15AS #8915,0.15,12,55000,CLR BH,+,M3,L4,ZPC(YEL),SM20C,BH,+,B,M3,L6,ZPC(YEL),SWRCH18A BU15AO(T541A),15P/15P,20276-N,1830MM,UL20276,BLACK,D-SUB/MALE ,DET. TYPE MJ15*S,UL1571#30,20P/30P,90mm,#30,12507HS-20,12507HS-30L,BK,SJ03-01-636,AT TAPE GS(MJ)15*,UL1061#28,UL/CSA,6P/5P,250mm,#28,12507HS-06L,12505HS-05,BK,HP04-01-006 MJ15AS/BS,SECC T0.8 GY17VS,,,, ALL,SS,PE,T0.05,90*45,BLK,POLYESTER,NO SILK MJ17ASSS/EDC,EDC,NETHERLANDS MJ17AS/BS,ABS HB,BK07 FH,+,B,M3,L8,NI PLT,SWRCH18A CH,-,-,M4,L10(5),ZPC(YEL),SWRCH18A,-,HD12,2 BODY LDPE,T0.05,L356,W240,TRP,28,2,PE MARK LDPE,T0.05,L80,W70,TRP,,,PE MARK MJ15,17,ART PAPER,55X10,RED GH15LS,PORON,DIA13.5MM,BLACK,2MM,-,GS17VS,ABS HB,BK07 GS17VS,ABS HB,BK07 MJ17AS/BS,SECC,T1.2 Goya2 Stand Guide,SyncMaster,W/W MJ15/17/19AS,BS,EDC,NETHERLANDS OPP/W50/CLR,T0.05,W50,L400000, DT,EU,FP3/YES,IEC320 C13/C14,250/250V,10-16/10A,BLK,1830MM,-,H05VV-F 3X0.75MM^2, LDPE,T0.05,L356,W240,TRP,28,2,PE MARK TFT LCD,BASIC,EU,MOJO,100G,W21 TFT LCD,SRC,RUSSIA,S/W,120,W210*L120,INSTALL CARD 710N,SyncMaster,W/W,27Lang,BN59-420A+BH68-376L LCDQUICK SETUP GUIDE,SYNCMASTER,E/F/S/G/P/I.13LANGS,W/W,MOJO100G,298,420 710T,W/W,SyncMaster,27 Lang MJ15BS/AS,EDC OPP/W75/CLR,T0.05,W75,L800000,CLR HDPE,T0.2,L1800,W1000,TRP,,,PAPER HDPE/NITRON(DOUBLE),T0.015/T0.5(DOUBLE),W700,L700,TRP,28 LANGUAGE,2LDPE,T0.02,W500,L10000,TRP,-,LDPE,T0.05,W2400,L1000,TRP,-,GH15,FOAM,T3.0,930,1000 SW-4,W2155*L140,-,DEC,-,-,-,-, -,LABEL SHIPPING,ART-PAPER,100G,-,WHT,BLACK,-,-,IBM(T85),SW,1000*3500,1166,-,-,-,-,VR22KO,CB SW-4,700,3800,YEL TS15AS,WOODEN,1150,780,120 MJ15AS,EPS M50 MJ15BS/AS,EDC ALL,TCO99,DOMESTIC,MOJO 90G,WHT S/M510N(MJ15AS),W/W,SW4,YEL,A-1,W376*D371*H101,SIMPLE SEC,LTM150XO-L01(ZPD) Remarks SNA SNA SNA SNA SA SNA SNA SNA SNA SNA SNA SNA SA SNA SNA SNA SNA SNA SNA SNA SNA SA SNA SA SNA SNA SNA SNA SA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA -

7-2-1 MJ17AS* Main PCB Parts
Level Loc. No. MJ17ASAB E23-MJ17ASAB BN94-00527C 0204-002420 0204-002426 3701-001219 Code No. CIS3 CIS4 CNASSY PCB MAIN SOLVENT FLUX CONNECTOR-DSUB Description SEC,LTM170EU-L11 MJ17AS 1M-1000,C3H70H,96,-,DF-201TVS,MIX,0.820,FLUX13%,14KG,15P,3R,FEMALE,ANGLE,AUF Specification Remarks SNA SNA SNA SA
Loc. No. 3711-004712 6003-000117 6003-000117 BN97-00354K 0903-001347 BN82-00114L BN97-00358S 3301-000314 3301-000314 3301-000314 3301-000314 3301-000314 3301-000314 2703-001334 3301-000314 3301-000314 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-000257 2203-005005 2203-005005 2203-005005 2203-000236 2203-000998 2203-005005 2203-005437 2203-005005 2203-005437 2203-005065 2203-000257 2203-000257 2203-000189 2203-005005 2402-001042 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-000426 2203-000257 2203-000426 2203-005005 2203-005005 2203-005005 2402-000108 2203-005005 2203-005005 2203-005065 2203-005005 2203-005005 2203-005065 2402-001042 2203-005005 2402-001042 2203-005005 2402-001042 2402-001042 3711-005543 3711-005470 0403-001411
Code No. CN600 IP/PCB+BRKT/PCB M/PCB+BRKT/PCB MICOM IC200 CIS BD100 BD101 BD102 BD103 BD104 BD105 BD106 BD200 BD201 C100 C101 C102 C103 C104 C105 C106 C110 C112 C114 C116 C117 C200 C201 C203 C205 C206 C221 C222 C224 C400 C401 C402 C403 C404 C405 C406 C407 C408 C409 C410 C411 C412 C413 C414 C415 C416 C417 C418 C419 C420 C421 C422 C423 C424 C603 C604 C605 C606 C607 C608 C609 C610 C611 C612 CN200 CN400 D100
Description CONNECTOR-HEADER SCREW-TAPTITE SCREW-TAPTITE ASSY MICOM IC-MICROCONTROLLER A/S MICOM ASSY SMD BEAD-SMD BEAD-SMD BEAD-SMD BEAD-SMD BEAD-SMD BEAD-SMD INDUCTOR-SMD BEAD-SMD BEAD-SMD C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-AL,SMD C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-AL,SMD C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-AL,SMD C-CER,CHIP C-AL,SMD C-CER,CHIP C-AL,SMD C-AL,SMD CONNECTOR-HEADER CONNECTOR-HEADER DIODE-ZENER
Specification BOX,9P,1R,2mm,STRAIGHT,SN BH,+,B,M3,L6,ZPC(YEL),SWRCH18A BH,+,B,M3,L6,ZPC(YEL),SWRCH18A GS17VS NT68F63GL,8Bit,PLCC,44P,653MIL,12MHz,ST,-,PLASTIC,5.000000V,-,-0to+70C,256B,-,-, GS17VS MJ17AS 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 1.5uH,10%,2012 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 10nF,10%,50V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 0.1NF,5%,50V,C0G,TP,1608 0.047NF,5%,50V,C0G,TP,1608 100nF,10%,16V,X7R,TP,1608 10000nF,+80-20%,10V,Y5V,TP,3216 100nF,10%,16V,X7R,TP,1608 10000nF,+80-20%,10V,Y5V,TP,3216 1000nF,+80-20%,10V,Y5V,-,1608 10nF,10%,50V,X7R,TP,1608 10nF,10%,50V,X7R,TP,1608 100nF,+80-20%,25V,Y5V,TP,1608, 100nF,10%,16V,X7R,TP,1608 100uF,20%,16V,GP,TP,6.6x6.6x5.4mm 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 0.018NF,5%,50V,C0G,TP,1608 10nF,10%,50V,X7R,TP,1608 0.018NF,5%,50V,C0G,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 10uF,20%,16V,WT,TP,4.3x4.3x5.4 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 1000nF,+80-20%,10V,Y5V,-,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 1000nF,+80-20%,10V,Y5V,-,1608 100uF,20%,16V,GP,TP,6.6x6.6x5.4mm 100nF,10%,16V,X7R,TP,1608 100uF,20%,16V,GP,TP,6.6x6.6x5.4mm 100nF,10%,16V,X7R,TP,1608 100uF,20%,16V,GP,TP,6.6x6.6x5.4mm 100uF,20%,16V,GP,TP,6.6x6.6x5.4mm BOX,6P,1R,1.25mm,SMD-A,SnPb,IVR BOX,30P,1R,1.25mm,SMD-A,Sn+Pb,IVR -,5.49-5.73V,200MW,SOD-323,TP

Remarks SA SNA SNA SA SNA SNA SNA SNA SNA SNA SNA SNA SNA SA SNA SNA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA
Loc. No. 0401-001056 0401-001056 0401-001056 0402-001080 3301-001145 0406-001061 1103-001023 1003-001674 0505-001772 1203-003209 BN41-00412A 0501-002080 2007-000821 2007-001164 2007-001164 2007-001164 2007-001164 2703-001334 2007-001164 2703-001334 2007-000084 2007-000090 2007-000078 2007-000113 2007-000113 2007-000113 2007-000113 2007-000113 2007-000113 2007-000070 2007-000090 2007-000090 2007-000084 2007-000084 2007-000084 2007-000084 2007-000084 2007-000084 2007-000084 2007-000084 2007-000084 2007-000090 2007-000084 2007-000084 2007-000084 2007-000077 2007-000080 2007-000074 2007-000074 2007-000074 2007-000074 2007-000070 2007-000074 2007-000074 2007-000074 2007-000074 2007-000074 2007-000083 2007-000074 2007-000074 2007-000074 2007-000074 2007-000084 2007-000074 2007-000074 2007-000078 2007-000074 2007-000077 2007-000090 2007-000074 2007-000090 2007-000090 2007-000078 2007-000821 2007-000070 2007-000070
Code No. D101 D103 D105 D600 FT600 IC106 IC201 IC400 IC600 IC601 MP1.0 Q601 R106 R107 R108 R109 R118 R119 R120 R121 R122 R123 R124 R134 R135 R136 R137 R138 R139 R200 R202 R203 R204 R205 R206 R207 R208 R209 R210 R211 R212 R214 R216 R217 R219 R221 R222 R223 R224 R225 R226 R227 R228 R229 R230 R231 R232 R233 R234 R235 R236 R237 R238 R239 R240 R241 R242 R243 R244 R247 R400 R401 R402 R403 R502 R503
Description DIODE-SWITCHING DIODE-SWITCHING DIODE-SWITCHING DIODE-RECTIFIER BEAD-SMD DIODE-TVS IC-EEPROM IC-LCD CONTROLLER FET-SILICON IC-DUAL VOLTAGE REGULATOR PCB MAIN TR-SMALL SIGNAL R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP INDUCTOR-SMD R-CHIP INDUCTOR-SMD R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP
Specification MMBD4148SE,100V,200MA,SOT-23,TP MMBD4148SE,100V,200MA,SOT-23,TP MMBD4148SE,100V,200MA,SOT-23,TP GF1G,400V,1A,DO,TP 60ohm,4516,6000mA,TP,70ohm/45MHz,82ohm/760MHz,0.01ohm MMQA5V6T3,5.32/5.6/5.88V,24W,S 24C08,1Kx8,SOP,8P,5x4mm,2.5/5.5V,0to+70C SE7889,PQFP,100P,23.45x17.45mm,-,-,TR,PLASTIC,0.3-3.6V,0to+70C,-,-,FDS9933A,P,-20V,-3.8A,0.075OHM,2W,SO-8 APL5522,SOP,8P,4.9x3.9mm,PLASTIC,3.3V/2.5V,-,0to+150C,500mA/300mA,-,TP MJ/GS,SILVER THROGH HOLE,2L,1.0,1.6T,118*78.2,4A 2SC2412K,NPN,200mW,SC-59,TP,120-270 390ohm,1%,1/10W,TP,1608 75ohm,1%,1/10W,TP,1608 75ohm,1%,1/10W,TP,1608 75ohm,1%,1/10W,TP,1608 75ohm,1%,1/10W,TP,1608 1.5uH,10%,2012 75ohm,1%,1/10W,TP,1608 1.5uH,10%,2012 4.7Kohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 1Kohm,5%,1/10W,TP,1608 33ohm,5%,1/10W,TP,1608 33ohm,5%,1/10W,TP,1608 33ohm,5%,1/10W,TP,1608 33ohm,5%,1/10W,TP,1608 33ohm,5%,1/10W,TP,1608 33ohm,5%,1/10W,TP,1608 0ohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 470ohm,5%,1/10W,TP,1608 2Kohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 0ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 3Kohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 4.7Kohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 1Kohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 470ohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 100ohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 10Kohm,5%,1/10W,TP,1608 1Kohm,5%,1/10W,TP,1608 390ohm,1%,1/10W,TP,1608 0ohm,5%,1/10W,TP,1608 0ohm,5%,1/10W,TP,1608

Level 1

Loc. No. BH69-40321A BN68-00129A BN69-00123L BN69-00140T BN69-00617K BN69-00741A BN92-01052V BN96-01192V 0203-000214 3903-000085 6902-000110 AA68-40065B BH68-00261F BH68-00261R BH68-00344C BN59-00048A BN96-01171A BH68-00376L BN59-00420A BN92-01057Y BH68-00530E BN69-00806E E29-MJ17ASAB
Code No. P/M P/M P/M P/M P/M P/M UNIT/ACCESSORY ACCESSORY ACCESSORY ACCESSORY ACCESSORY ACCESSORY ACCESSORY ACCESSORY ACCESSORY ACCESSORY CIS CIS BOX BOX -
Description PACKING-PAD LABEL SHIPPING PAD PACKING PAD-PALLET COVER PALLET-PACKING CUSHION-PIVOT ASSY ACCESSORY ASSY ACCESSORY TAPE-OPP MASKING CBF-POWER CORD BAG PE CARD-01,REGISTRATION CARD WARRANTY-03 MANUAL-00 CARD WARRANTY-00 S/W DRIVER-7.5 ASSY MANUAL P-IB+QSG MANUAL-01 S/W DRIVER-00,IB ASSY BOX LABEL BOX-01 BOX-00 2
Specification SW-4,W2155*L140,-,DEC,-,-,-,-, -,LABEL SHIPPING,ART-PAPER,100G,-,WHT,BLACK,-,-,RJ15PO SUN(LSA810),SW,900,3760,-,-,-,-,TS17AS,WOODEN,1310,910,120 MJ17AS,EPS M50 MJ17/19,ADC,UNITED STATES,PIVOT MJ17/19,ADC,UNITED STATES,PIVOT OPP/W50/CLR,T0.05,W50,L400000, DT,US,BP3/YES,I(IEC C13/C14),125/125V,10/10A,BLK,1830MM,-,SVT AWG18X3,UL/CSA,-,LDPE,T0.05,L356,W240,TRP,28,2,PE MARK ,SEA,A5,ENG,A/P220,2P(SIDES),4 SyncMaster14-1,ADC,MOJO180G,E/F,USA 3 MONTHS CRM CARD,SECA,E/F,CANADA,MOJO120G,173,234 SECA WTY & CRM CARD,SECA,MOJO100G,E/F,CANADA SYNCMASTER,PIVOT,SAMSUNG 710N,SyncMaster,W/W,27Lang,BN59-420A+BH68-376L LCDQUICK SETUP GUIDE,SYNCMASTER,E/F/S/G/P/I.13LANGS,W/W,MOJO100G,298,420 710T,W/W,SyncMaster,27 Lang MJ17ASAB,ADC,UNITED STATES,S/M711N,POIVOT,TCO99 ALL MODEL,MOJO 90G,90,95,WHT,3Y W/T+TCO99+PIVOT S/M711N(MJ17AS) W/W,CB-SW4,YEL,A-1,L496*W395*H214,PIVOT SEC,LTM170EU-L11 ZPD
Remarks SNA SNA SNA SNA SNA SNA SNA SNA SNA SA SNA SNA SNA SNA SNA SNA SNA SA SNA SNA SNA SNA -
7-3-1 MJ19AS* Main PCB Parts
Level Loc. No. MJ19ASAB/XSH E10-MJ19ASAB/XSH BN94-00516T 0204-002420 0204-002426 BN63-00995A 3701-001219 3711-004712 6003-000117 6003-000117 BN97-00354K 0903-001347 BN82-00114L BN97-00358G 3301-000314 3301-000314 3301-000314 3301-000314 3301-000314 3301-000314 2703-001334 3301-000314 3301-000314 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-005005 2203-000257 2203-005005 2203-005005 Code No. CIS3 CIS4 CIS8 CN101 CN600 IP/PCB+BRKT/PCB M/PCB+BRKT/PCB MICOM IC200 CIS BD100 BD101 BD102 BD103 BD104 BD105 BD106 BD200 BD201 C100 C101 C102 C103 C104 C105 C106 C110 CASSY PCB MAIN-E10/E17 SOLVENT FLUX GASKET CONNECTOR-DSUB CONNECTOR-HEADER SCREW-TAPTITE SCREW-TAPTITE ASSY MICOM IC-MICROCONTROLLER A/S MICOM ASSY SMD BEAD-SMD BEAD-SMD BEAD-SMD BEAD-SMD BEAD-SMD BEAD-SMD INDUCTOR-SMD BEAD-SMD BEAD-SMD C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP Description LTM190E1-L02 GS19VS/MJ19AS 1M-1000,C3H70H,96,-,DF-201TVS,MIX,0.820,FLUX13%,14KG,GY17MS,CONDUCTIVE FAB,4MM,15MM,100MM,GRAY,32K,71TSSK-15-4-100-13 15P,3R,FEMALE,ANGLE,AUF BOX,9P,1R,2mm,STRAIGHT,SN BH,+,B,M3,L6,ZPC(YEL),SWRCH18A BH,+,B,M3,L6,ZPC(YEL),SWRCH18A GS17VS NT68F63GL,8Bit,PLCC,44P,653MIL,12MHz,ST,-,PLASTIC,5.000000V,-,-0to+70C,256B,-,-, GS17VS GS17VS/17VT/GS19VT 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 1.5uH,10%,2012 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 120ohm,1.6x0.8x0.8mm,150mA,,,,40000ohm 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 10nF,10%,50V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 100nF,10%,16V,X7R,TP,1608 Specification Remarks SNA SNA SNA SNA SA SA SNA SNA SA SNA SNA SNA SNA SNA SNA SNA SNA SNA SA SNA SNA SA SA SA SA SA SA SA SA SA

15" Only(Option)

D104 B 2 C 3 C113 100nF 16V MO MMBD4148SE A 1

VSYNC_IN_A

RX2+ RX2-

RXC+ RXC-

RX1+ RX1-

C611 100uF 16V

D103 MMBD4148SE

C612 100uF

C111 100nF 16V MO

C112 100nF 16V

R+IN_A
IC602 AP1117D-33A 4 OUT IN GND 1

A 1 B 2

MMBD4148SE

C114 100nF 16V

D106 C 3
+5V_DDC_D G-IN_A G+IN_A B+IN_A R+IN_A B-IN_A R-IN_A

D105 MMBD4148SE

1 B 2 A

C119 100nF 16V MO

C115 100pF 50V MO

C116 100pF 50V MO

C117 47pF 50V MO

C118 100pF 50V MO

TP200 TP201 TP202

12507WR-06L

D107 A 1 B 2 C 3 C120 100nF 16V MO MMBD4148SE

R122 4.7K 1/16W

R123 10K 1/16W
D108 A 1 B 2 C123 100nF 16V MO C 3

+5V_DDC_D

3 A1 1
D109 UDZS5.6B-TE-17 B 2 A 5.2V ~ 6.0V 1 C126 100nF 16V MO R126 15K 1/16W R127 15K 1/16W SCL_DDC_D SDA_DDC_D CN101 d_sub15p

LED_GREEN KEY2 KEY1

C224 100nF 25V MO

CAC1 1

1 TP203

C125 100nF 16V MO

D111MMBD4148SE A 1 B 2 C 3
5.32V ~ 5.88 *Operating Range* 6 5

1 C3 CA4

IC105 MMQA5V6T3 5.32V ~ 5.88
IC106 5.32V ~ 5.88 MMQA5V6T3

U2 TP43

C127 100nF 16V MO

MMBD4148SE A 1

D113 A 1 B 2 C 3 C128 100nF 16V MO MMBD4148SE
TP49 TP48 TP41 TP44 TP40 TP39
AT24C02N-10SC R131 10K 1/16W

D115 UDZS5.6B-TE-17

B E Q100 2SC2412K-Q

DDC_CON R132 100

tpcon26p

DVI-D SUB

2.5V ~ 5.5V

R125 1K 1/16W

IC107 MMQA5V6T3
D110 UDZS5.6B-TE-17 B A 2

UDZS5.6B-TE-17 ZD200

C221 10nF 50V MO

C222 10nF 50V MO

R602 10K 1/16W

C601 100uF 25V

C602 10nF

To Function PCB