SyncMaster 730XT/930XT

Install drivers

Install programs

Notation

Otherwise, it may result in death or personal injury. Otherwise, it may result in personal injury or property damage.

Prohibited

Important to read and understand at all times

Do not disassemble

Disconnect the plug from the outlet

Do not touch

Ground to prevent an electric shock
When not used for extended period of time, set your computer to DPM. If using a screen saver, set it to active screen mode. The images here are for reference only, and are not applicable in all cases (or countries).
Do not use a damaged power cord or plug or a damaged or loose power outlet.
Otherwise, this may result in electric shock or fire.
Do not touch the power plug with wet hands when removing or plugging the plug into the outlet. Otherwise, this may result in electric shock.
Make sure to connect the power cord to a grounded power outlet. Otherwise, it may result in electric shock or personal injury.
Ensure that the power plug is plugged into the power outlet firmly and correctly. Otherwise, this may result in fire.
Do not forcefully bend or pull the power plug and do not place any heavy material on it. Otherwise, this may result in fire.
Do not connect multiple appliances to the same power outlet. Otherwise, this may cause fire due to overheating.
Do not disconnect the power cord while using the product. Otherwise, this may result in damage to the product due to electric shock.
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. This may cause electric shock or fire.
Use only the power cord provided by our company. Do not use the provided power cord of another product. Otherwise, this may result in fire or electric shock.

Installation

Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Do not drop the monitor when moving it. This may cause damage to the product or the person carrying it.
Ensure that at least two persons lift and move the product. Otherwise, it may be dropped and cause personal injury, and/or damage the product.
When installing the product in a cabinet or rack, make sure that the front end of the bottom of the product does not project out. Otherwise, it may fall or cause personal injury. Use a cabinet or rack of a size appropriate to the product.
DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIGARETTES AND ANY HEATING APPLIANCES NEAR THE PRODUCT. Otherwise, this may result in fire.
Keep heating appliances as far away from the power cord or the product as possible. Otherwise, this may result in electric shock or fire.
Do not install it in a badly ventilated location such as a bookcase or closet. Otherwise, this may result in fire due to an increase in the internal temperature.

Programs

- XPe Client is a client/server-based computing platform. On this platform, the client accesses the server each time it needs a program and it only receives the user interface screens from the server. Hence, various programs, such as ICA, RDP, and VNC, which are installed on a XPe Client, are used to help the client access the server and perform user tasks. Citrix Program Neighborhood Independent Computing Architecture (ICA) allows you to use applications on the server through a wide range of platforms and networks regardless of their basis. The ICA MetaFrame Server separates the applications internal logic from the user interface. Due to this separation, users only work with the user interface on the client. The actual application is 100% run on the server. In addition, running an application through ICA only uses approximately 10 % bandwidth compared to running it locally. By using this feature of ICA, users can do more work on the client than working locally. The core technologies of ICA are as follows: Thin Resource - Low system requirements needed for running ICA; a computer equipped with an Intel 286 processor and 640K RAM is sufficient. This means ICA can be run on any computer that exists at present. Thin Wire - The default bandwidth required by ICA protocol is 20 kbps, on average. Therefore, even with a Dial-Up or ISDN connection, a consistent performance is maintained. Any program, however large it is, can be run stably at a low bandwidth. Universal Application Client - The Citrix ICA protocol separates the user interface from the application. While an application is running on the WinFrame multi-user application server, its user interface is running on the thin client software of WinFrame. Hence, in any environment, it is possible to run applications fast. Platform Independent - ICA is inherently being operated regardless of the operating system platform. Because the clients for UNIX, OS/2, Macintosh, and Non-DOS are already on the market, you can run Windows applications on these operating systems. The Citrix Program Neighborhood is a program that manages these ICA connections. To start the Citrix Program Neighborhood, select Start Programs Citrix MetaFrame Access Clients Program Neighborhood, or double-click the Citrix Program Neighborhood icon. To create a new ICA connection, double-click the Add ICA Connection icon and follow these steps:
1. Select the type of connection to create.
2. Type the connection name and the server name (IP address or DNS name).
3. Configure the degree of compression for the data to be sent and received, and the degree of reliability for sessions.
4. To login to the server automatically, enter your username, password and domain. If you do not enter them now, you will be prompted to enter them whenever you connect to the server.
5. You can specify the color and size of the window to be displayed.

Session Status Current session: Displays the volumes being protected by the FBWF and a list of the folders and files on those volumes that are excepted from protection by the FBWF. Next session: Select the volumes that will be protected by the FBWF when the client is booted up next time. Also, select the folders and files that you want to except from protection by the FBWF.
Windows Media Player The XPe Client includes Windows Media Player 6.4. With Windows Media Player, you can play audio and video files on a website.

Control Panel

The Windows Firewall The Windows Firewall protect your client further. The Windows Firewall allows you to restrict incoming data to your client from other computers, thus helping to control your client data more effectively. In addition, it also provides a barrier between your client and network connections reducing unauthorized access, viruses,
and worms across networks. You can think of a firewall as a sentinel which identifies incoming data from the Internet and other networks. According to the firewall settings, incoming data to your computer is either permitted or rejected. The Windows Firewall is, by default, installed and activated on your client. However, your administrator can turn it off. You can choose and select a different firewall. Therefore, it is not required for you to use the Windows Firewall. Estimate the functions of other firewalls and choose the best one to fit your requirements. To install and run a different firewall, you must turn off the Windows Firewall. You must be logged on as administrator to turn the Windows Firewall on or off. Follow these steps to turn the Windows Firewall on or off. 1. Run the Windows Firewall. 2. Click on one of these options under the General tab. On (recommended) : This is the recommended setting for normal use. On with no exceptions : This settings blocks all unwanted access to your client, including all requests to programs and services selected in the Exceptions tab. Use this setting when you need to protect your client to the maximum extent. Off (Not recommended) : Turning off the Windows Firewall may make your client and network more vulnerable to viruses and intruders.

Configuring Utilities

Local Drive C Drive The C drive is used for the system. If there is less than 3MB of free space available, the client OS cannot operate. Therefore, always ensure that there is a sufficient amount of free space available. EWF can help maintain available space by preventing the C drive being written to directly. Saving Files Your client uses a fixed size of flash memory. Therefore, it is better to save files to the server rather than to your client. Mapping a Network Drive The administrator can map a folder to a network drive. To keep the mapping information after restarting the client, take note of these directions carefully. Select the Reconnect at logon checkbox in the Map Network Drive dialog box. If the EWF or FBWF is enabled, the changes are saved on the disk.

Microsoft Windows NT Operating System Click "Start," "Settings," "Control Panel," and then double-click "Display" icon. In the Display Registration Information window, click the Settings tab and then click "All Display Modes". Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then click "OK". Click the "Apply" button if you see the screen working normally after clicking "Test". If the screen is not normal, change to a different mode (lower mode of resolution, colors, or frequency). If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide.
Linux Operating System To execute X-Window, you need to make the X86Config file, which is a type of system setting file. Press "Enter" at the first and the second screen after executing the X86Config file. The third screen is for setting your mouse. Set a mouse for your computer. The next screen is for selecting a keyboard. Set a Keyboard for your computer. The next screen is for setting your monitor. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.) Set a vertical frequency for your monitor. (You can enter the frequency directly.) "Enter" the model name of your monitor. This information will not affect the actual execution of XWindow. You have finished setting up your monitor. Execute X-Window after setting other requested hardware.

Natural Color

One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the
monitor. the Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in association with Korea Electronics & Telecommunications Research Institute (ETRI). This is only available for Samsung monitors and ensures that the color of the images on the monitor are the same as the printed or scanned images. For more information, refer to Help (F1) in the software program. Installing the Natural Color Software Insert the CD included with the Samsung monitor into the CD-ROM Drive. The initial Natural Color screen will appear. Click on Natural Color in the startup window to install the Natural Color software. To install the program manually, insert the CD included with the Samsung monitor into the CD-ROM Drive, click the Windows [Start] button, select [Run.]. Enter D:\Color\NCProSetup.exe and then press the <Enter> key. (If the drive where the CD is inserted is not D:\, enter the applicable drive.) Uninstalling the Natural Color Software Program Select "Settings" / "Control Panel" from the "Start" menu and then double-click "Add/Delete a program" Select Natural Color from the list and then click the "Add/Delete" button.

MagicTune

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Insert the installation CD into the CD-ROM drive. Click the MagicTune installation file. Select installation Language, Click "Next". When the Installation Shield Wizard window appears, click "Next." Select "I agree to the terms of the license agreement" to accept the terms of use. Choose a folder to install the MagicTune program. Click "Install." The "Installation Status" window appears. Click "Finish." When the installation is complete, the MagicTune executable icon appears on your desktop. Double-click the icon to start the program. MagicTune execution icon may not appear depending on specification of computer system or monitor. If that happens, press F5 Key.
Installation Problems (MagicTune) The installation of MagicTune can be affected by such factors as the video card, motherboard and the network environment.
System Requirements OS Windows 2000 Windows XP Home Edition Windows XP Professional Windows Vista
It is recommended using MagicTune in Windows 2000 or later.
Hardware 32MB Memory above 60MB Hard disk space above * For more information, visit the MagicTune website.

Uninstall

The MagicTune program can be removed only by using the "Add or Remove Programs" option of the Windows Control Panel. Perform the following steps remove MagicTune. 1. Go to [Task Tray] ' [Start] ' [Settings] and select [Control Panel] in the menu. If the program runs on Windows XP, go to [Control Panel] in the [Start] menu. 2. Click the "Add or Remove Programs" icon in Control Panel. 3. In the "Add or Remove Programs" screen, scroll down to find "MagicTune". Click on it to highlight it. 4. Click the "Change/Remove" button to remove the program. 5. Click "Yes" to begin the uninstall process. 6. Wait until the "Uninstall Complete" dialog box appears. Visit the MagicTune website for technical support for MagicTune, FAQs (questions and answers) and software upgrades.

Control Buttons

[ ] Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. [ ] These buttons allow you to adjust items in the menu. [ ] Press this button to Activates a highlighted menu item. [AUTO] When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center.

Internet Game Sport Movie Dynamic Contrast
For working with a mixture of images such as texts and graphics. For watching motion pictures such as a game. For watching motion pictures such as a sport. For watching motion pictures such as a DVD or Video CD. Dynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create optimum contrast.
Description MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality.

MagicColor

Off Demo
Returns to the original mode. The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left. Full Displays not only vivid natural color but also more realistic natural skin color with clearness. Intelligent Displays vivid natural color with clearness. The tone of the color can be changed and one of four modes can be selected -Cool, Normal, Warm and Custom. ( Not available in MagicColor mode of Full and Intelligent. )

MENU , , , MENU

Color Tone

Color Control

Adjusts individual Red, Green, Blue color balance. - Red, Green, Blue ( Not available in MagicColor mode of Full and Intelligent. )

MENU , , , , MENU

You can change the overall mood by changing the screen colors. ( Not available in MagicColor mode of Full and Intelligent. ) - Off - Grayscale - Green
- Aqua - Sepia Off This applies an achromatic color to the screen to adjust the screen effects. Grayscale The default colors of black and white are displayed. Green This applies the green color effect to a black and white screen. Aqua This applies the aqua color effect to a black and white screen. Sepia This applies the Sepia color effect to a black and white screen.

Color Effect

Gamma correction changes the luminance of the colors with intermediate luminance. Gamma - Mode 1 - Mode 2 - Mode 3
( Not available in MagicColor mode of Full and Intelligent. ) Menu Description Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. Available in analog Mode Only

MENU , , MENU

Coarse
Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after adjusting the frequency (clock speed). Fine Available in analog Mode Only

Sharpness

Changes the clearance of image.
Changes the horizontal position of the monitor's entire display. H-Position Available in analog Mode Only
Changes the vertical position of the monitor's entire display. V-Position Available in analog Mode Only
Description You can choose one of nine languages.

Language

The language chosen affects only the language of the OSD. It has no effect on any software running on the computer.

There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals?
The monitor is in PowerSaver mode. Press a key on the keyboard to activate the monitor and restore the image on the screen. If there is still no image, press the 'SOURCE' button. Then press any key on the keyboard again to activate the monitor and restore the image on the screen.
I cannot see the On Screen Display.
Have you locked the On Screen Display (OSD) Menu to prevent changes? Is the screen displaying only one color as if looking at the screen through a cellophane paper? Have the screen colors become strange after running a program or due to a crash between applications? Has the video card been set properly?
Unlock the OSD by pressing the [ ] button for at least 5 seconds.
The screen shows strange colors or just black and white.
Check the signal cable connection. Make sure the video card is fully inserted in it's slot.

Reboot the computer.

Set the video card by referring to the video card manual.
The screen suddenly has become unbalanced.
Have you changed the video card or the driver? Have you adjusted the resolution or frequency to the monitor?
Adjust screen image position and size using the OSD.
Adjust the resolution and frequency at the video card. (Refer to the Preset Timing Modes).
The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD. The screen is out of focus or OSD cannot be adjusted. Have you adjusted the resolution or frequency on the monitor? Is the frequency properly adjusted when checking the Display Timing on the menu? Adjust the resolution and frequency of the video card. (Refer to the Preset Timing Modes).
LED is blinking but no images on the screen.
Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes. ( The maximum frequency per resolution may differ from product to product. ) Windows XP : Set the resolution at the Control Panel Appearance and Themes Display Settings. Windows ME/2000 : Set the resolution at the Control Panel Display Settings.
There are only 16 colors shown on the screen. The screen colors have changed after changing the video card.
Have the Windows colors been set properly?
Has the video card been set properly? There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found". Have you installed the monitor driver? See the video card manual to see if the Plug & Play (VESA DDC) function can be supported. MagicTune feature is found only on PC (VGA) with Window OS that supports Plug and Play.

Signal Cable 15pin to 15pin D-sub cable, Detachable Dimensions (W x H x D) / Weight 370.0 x 342.3 x 69 mm / 14.6 x 13.5 x 2.7 inch (Without Stand) 370.0 x 404.3 x 200 mm / 14.6 x 15.9 x 7.9 inch (With Basic Stand), 6.45 Kg / 14.2 (lbs) VESA Mounting Interface 100 mm x 100 mm Environmental considerations Operating Temperature : 50F ~ 104F (10C ~ 40C) Humidity : 10 % ~ 80 %, non-condensing Temperature : -4F ~ 113F (-20C ~ 45C) Humidity : 5 % ~ 95 %, non-condensing

Storage

Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1 ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness. For example, the number of TFT LCD sub pixels that is contained in this product are 3,932,160. Design and specifications are subject to change without prior notice. Class B Equipment (Information Communication equipment for residential use) This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)
Client Item LAN USB Internet Browser Photo Video Specifications 1 Gbps 2.0 4Ports MS Internet Explorer JPEG,BMP MPEG1,WMV (Not exceeding 720p)
Server Requirement Connect Client No Minimum SPEC Just can load Server Program CPU PMHz RAM 64 Mbyte Ethernet 100 Mbps OS windows 2003 Server

Recommend SPEC

1 2~4 5~7 8~10
P4 1.0 GHz P4 2.4 GHz P4 3.0 GHz P4 3.2 GHz
256 Mbyte 512 Mbyte 100 Mbps 1 Gbyte 2 Gbyte windows 2003 Server
The content presented above is the result of testing a specific server. The information may change as the server may be different. For some products, the OS may not be supported. When purchasing a product, make sure to check whether or not the OS is supported. USB Local Device (USB) Connection Speed When booting up a monitor, a blank screen may appear for 3 ~ 4 seconds until the MagicNet screen appears. If you turn the monitor off while booting, it may damage the product. Local Device (USB) compatibility HID(Human Interface Devices) : Keyboard, Mouse MSC(Mass Storage Class), Devices using the SCSI(Small Computer System Interface) command set, FAT(File Allocation Table) System Exception Some manufacturers have wrongly specified their device to be USB standard compatible. Our product has exception handling procedures. But Some devices are unlikely to work properly. Some manufacturers have wrongly specified their device to be SCSI compatible. Such devices are unlikely to work properly. It is recommended that USB devices are purchased after they are tested and confirmed to be compatible.

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a Power Key of the Function Key. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature. Power off (Power button) EPA/ENERGY 2000 Black Less than 2.7 W

Normal Operation

Power saving mode
Power Indicator Power Consumption

Green Less than 70 W

Black Less than 4.7 W
This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPM functionality. As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the ENERGY STAR guidelines for energy efficiency. This product is complied with ENERGY STAR requirements for Integrated computers.

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Preset Timing Modes Horizontal Frequency (kHz) 31.469 31.469 31.469 35.000 49.726 37.861 37.500 35.156 37.879 48.077 46.875 48.363 56.476 60.023 63.981 79.976 Vertical Frequency (Hz) 70.086 59.940 70.087 66.667 74.551 72.809 75.000 56.250 60.317 72.188 75.000 60.004 70.069 75.029 60.020 75.025

Display Mode

Pixel Clock (MHz) 25.175 25.175 28.322 30.240 57.284 31.500 31.500 36.000 40.000 50.000 49.500 65.000 75.000 78.750 108.000 135.000
Sync Polarity (H/V) +/-/-/+ -/-/-/-/+/+ +/+ +/+ +/+ -/-/+/+ +/+ +/+
IBM, 640 x 350 IBM, 640 x 480 IBM, 720 x 400 MAC, 640 x 480 MAC, 832 x 624 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1280 x 1024 VESA, 1280 x 1024

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Preset Timing Modes Horizontal Frequency (kHz) 31.469 31.469 31.469 35.000 49.726 68.681 37.861 37.500 35.156 37.879 48.077 46.875 48.363 56.476 60.023 67.500 60.000 63.981 79.976 Vertical Frequency (Hz) 70.086 59.940 70.087 66.667 74.551 75.062 72.809 75.000 56.250 60.317 72.188 75.000 60.004 70.069 75.029 75.000 60.000 60.020 75.025
Pixel Clock (MHz) 25.175 25.175 28.322 30.240 57.284 100.000 31.500 31.500 36.000 40.000 50.000 49.500 65.000 75.000 78.750 108.000 108.000 108.000 135.000
Sync Polarity (H/V) +/-/-/+ -/-/-/-/-/+/+ +/+ +/+ +/+ -/-/+/+ +/+ +/+ +/+ +/+
IBM, 640 x 350 IBM, 640 x 480 IBM, 720 x 400 MAC, 640 x 480 MAC, 832 x 624 MAC, 1152 x 870 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1152 x 864 VESA, 1280 x 960 VESA, 1280 x 1024 VESA, 1280 x 1024
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
North America U.S.A CANADA MEXICO Latin America ARGENTINE BRAZIL CHILE COLOMBIA COSTA RICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA PUERTO RICO REP. DOMINICA 0800-333-3733 0800-124-421 4004-0000 800-SAMSUNG(726-7864) 01-8000112112 0-800-507-7267 1-800-10-7267 800-6225 1-800-299-0013 800-7919267 1-800-234-7267 00-1800-5077267 800-7267 1-800-682-3180 1-800-751-2676 http://www.samsung.com/ar http://www.samsung.com/br http://www.samsung.com/cl http://www.samsung.com/co http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin 1-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) http://www.samsung.com/us http://www.samsung.com/ca http://www.samsung.com/mx
TRINIDAD & TOBAGO VENEZUELA Europe AUSTRIA BELGIUM CZECH REPUBLIC
1-800-SAMSUNG(726-7864) 0-800-100-5303
http://www.samsung.com/latin http://www.samsung.com/latin
0800-SAMSUNG(726-7864) 2418 800-726-786 (800 - SAMSUNG)
http://www.samsung.com/at http://www.samsung.com/be http://www.samsung.com/cz
DENMARK EIRE FINLAND FRANCE
100 030-3260 SAMSUNG ( 0,15/Min) 65 ( 0,15/Min) 01805-SAMSUNG(726-7864) ( 0,14/Min) 06-80-SAMSUNG(726-7864) 800-SAMSUNG(726-7864) 0900 SAMSUNG(726-7864) ( 0,10/Min) 815-022-607-93-33 80820-SAMSUNG(726-7864) 0800-SAMSUNG(726-7864) 902-1-SAMSU(72678) 0771-0800-SAMSUNG(726-7864) 0845 SAMSUNG (7267864)

Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal Frequency.

Unit : kHz

Interlace and Non-Interlace Methods Showing the horizontal lines of the screen from the top to the bottom sequentially is called the NonInterlace method while showing odd lines and then even lines in turn is called the Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a clear image. The Interlace method is the same as that used in TVs.
Plug & Play This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically. This monitor follows the international standard VESA DDC for the Plug & Play function.
Resolution The number of horizontal and vertical dots used to compose the screen image is called the 'resolution'. This number shows the accuracy of the display. A high resolution is good for performing multiple tasks as more image information can be shown on the screen. Example :If the resolution is 1280 x 1024 , this means the screen is composed of 1280 horizontal dots (horizontal resolution) and 1024 vertical lines (vertical resolution).

For Better Display

Adjust computer resolution and screen injection rate (refresh rate) oncomputer as described below to enjoy the best quality of picture. You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT-LCD. Resolution : 1280 x 1024 Vertical frequency (refresh rate) : 60 Hz TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness. For example, the number of TFT LCD sub pixels that is contained in this product are 3,932,160. When cleaning the monitor and the panel outside, please apply the recommended small amount of cleaner by using a soft cloth to polish. Do not force the LCD area but rub softly. If excessive force is applied, you can have a stain on it. If you are not satisfied with the picture quality, you can get better quality of picture by performing the "auto adjustment function" in display screen that is appeared as window termination button is pressed. If there's still noise after the automatic adjustment, use the FINE/COARSE adjustment function. When viewing a fixed screen for an extended period of time, a residual image or blurriness may appear. Change the mode to energy save or set a screensaver to move the picture when you need to be away from the monitor for an extended period of time.

Authority

Information in this document is subject to change without notice. 2008 Samsung Electronics Co., Ltd. All rights reserved. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and
Windows NT are registered trademarks of Microsoft Corporation; VESA, DPM and DDC are registered trademarks of Video Electronics Standard Association; the ENERGY STAR name and logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR Partner, Samsung Electronics Co., Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners.

Introducing the SyncMaster 730XT/930XT Samsung and PC House revolutionize Sri Lankan IT yet again
One of the global leaders for inventing versatile tools in IT, Samsung together with Sri Lankas leading IT vendor PC House, recently introduced a revolutionary technology that will take Sri Lankan standards to the next level. The Samsung Thin Client server system operates as a network monitor, providing functionality above and beyond what competitor models offer. Encompassing benefits like security, efficiency in control and reduced costs of ownership, the Samsung Thin Client is structured around a powerful server that connects individual terminals to an integrated network. This method eliminates the need of having many complete PC systems at every workstation and the user could operate only with a terminal that has the keyboard, mouse, and a monitor. The client management software integrated in the product enables convenient and accurate maintenance of information and tracking of internal responses to meet various needs. With a low cost of maintenance and low rate of failure and repair need, Samsung Thin Client is a powerful addition to the PC House product list. Tested in demanding companies such as Orange Telecom, Blokker (A leading household goods chain in the Netherlands), SKYE (A leading Philippine call centre and data management centre) and with ministries such as Finance and Economy in the Netherlands, Samsung Thin Client has proven its worth in many fields globally. Mr SHM Rishan, Chairman of PC House and its group PCH Holdings, speaking about Samsung said that the company is very happy with their partnership with Samsung. The high quality technology Samsung is famous for is strength in marketing it locally. The brand is known for innovation and outof-the-box thinking, leading to some of the most advanced operating technologies available in the technology market today. We are happy with the partnership and hope to continue to provide the best of Samsung technologies to the Sri Lankan It market. Boasting features like remote monitoring, remote management systems, and high-level deployments, Samsung Thin Client enables Managers to exercise better control over their systems. The Thin Client technology also enhances the safety and security of the system and information stored on the server; allowing quick, easy and secure access to information from anywhere in the network. Compatible with heterogeneous operating systems such as Microsoft Windows and Linux, Samsung Thin Client comes with a backup operating system enhancing the centralization of data and security. Coupled with versatility through tools like hands free migration, security management within the network and task scheduling systems the Thin Client is truly one of a kind. Its stylish design, high performance and diverse functionality makes Samsung Thin Client an asset to any company and it is a comprehensive integration system equipped with features and benefits unheard of through most other systems. In a bid to help PC House provide customers with sufficient information on how such Samsung products help boost businesses and empower lifestyles, Mr. Ramesh Kumar Dubey of Samsung Electronics recently came to Sri Lanka to conduct a Dealer Convention and training program. This training imparted information to help both dealers and employees better understand the workings, features and functionality of the Thin Client. Speaking on the Thin Client and its functions at the training programme, Mr. Ramesh Kumar Dubey of Samsung Electronics said he was enthusiastic about the advancement of the Thin Client. It is one of our most innovative and comprehensive technologies. Providing both a diverse range of functions and options, Samsung Thin Client provides managers with un-paralleled control over the functions of their teams enabling an overall view of processes. Allowing the connection of a second monitor, data projectors for presentations or lecturing purposes and a large format display, this Thin Client is an operating tool with far more uses than your average network monitor is. According to Ravindra Jayasinghe, Samsung Product Manager PC House, the program introduced to PC House internal staff, regional and showroom staff a gamut of new products from Samsung and

afforded them the opportunity to gain extensive knowledge on these, be it their technical qualities or the socio-economic benefits from their use. It was the kind of IT product development experience that could effectively communicate the unparalleled potential and benefits of Samsungs breakthrough technology. Samsung has been widely credited as not only leading the world in digital technologies but also using such training programs and conventions to take a personal interest in disbursing knowledge on the benefits and potential of such technology effectively, by starting for example, with the people who are responsible for selling such products. The comprehensive partnership between Samsung and PCH provides the Sri Lankan market with the best in technology, customer care, and service. A partnership between industry giants, the arrival of the Samsung Thin Client is sure to hail an unparalleled change in how Sri Lankan businesses operate. The partnership between PC House and Samsung is further strengthened following the recent training program. Both companies are extremely confident that even in times of economic uncertainty like these, customers can still avail the full spectrum of benefits from Samsung technologies, whether the user is tech savvy or IT awkward. About Samsung Electronics Samsung Electronics Co., Ltd. is a global leader in semiconductor, telecommunication, digital media and digital convergence technologies with 2006 parent company sales of US$63.4 billion and net income of US$8.5 billion. Employing approximately 138,000 people in 124 offices in 56 countries, the company consists of five main business units: Digital Media Business, LCD Business, Semiconductor Business, Telecommunication Network Business, and Digital Appliance Business. Recognized as one of the fastest growing global brands, Samsung Electronics is a leading producer of digital TVs, memory chips, mobile phones and TFT-LCDs. For more information on Samsung please visit www.samsung.com About PC House Operating for more than a decade, PC House is a leading IT Solutions provider in Sri Lanka offering customers the best options in computers and accessories with an innovative product portfolio and an unparalleled after-sales service, through a strong branch network. PC House is the pioneer subsidiary of PCH Group, which deals in hardware and software trade, solution integration & business applications, audio visuals, office automation, pharmaceutical & healthcare, consumer electronics, automobiles and property development.