If You Want to Reset This Feature. Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is 0-0-0-0. If you want to change the PIN number, use the Change PIN function.
[UC7000]BN68-02590D-Eng.indb 7

2010-04-02 3:39:17

Connecting to an AV Device
Using an HDMI or HDMI/DVI cable (up to 1080p) Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, STB satellite receiver

DVD / Blu-ray player

HDMI OUT

DVI OUT

AUDIO OUT

R-AUDIO-L

HDMI IN 1(DVI), 2(ARC), 3, 4, PC/DVI AUDIO IN
xx When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD, Blu-ray
player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio. versions older than 1.4 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying flicker / abnormal colour). suspect the version is older than 1.4, contact the provider of the device to confirm the HDMI version and request an upgrade.
xx If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI xx If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you xx Samsung TVs support the HDMI 1.4 (with 3D and Audio Return Channel). However, the ARC(Audio Return
Channel) function is only supported on HDMI IN 2(ARC) If 3D Auto View is On, some functions, such as Internet@TV, are disabled. If this is a problem, set 3D Auto View or 3D Mode to Off. when the TV is connected to an audio receiver that supports the ARC function. The ARC Single mode is only enabled when the TV is connected to the device when using HDMI Standard cable, HDMI High Speed cable, Hdmi Standard with Ethernet cable, HDMI High Speed with Ethernet cable. When the Input Source is the TV, the ARC function allows audio to be heard from a receiver. The audio is sent to a receiver from the TV via an HDMI cable without the need for a separate optical cable. connection error may occur.

/ ENTER E / /

DTV Air 800 five
Home and Away 18:00 - 18:30

800 ve

2:10 Tue 1 Jun

ENTER E EXIT e

Dani is devastated when scott makes clear his views on marriage.
Channel View - TV Today 27 Discovery 28 DiscoveryH&L 800 five 24 price-drop.tv 16 QVC 6 R4DTT
18:00 - 19:00 American Chopper Programmes resume at 06:00 Home and. )Family Affairs No Information QVC Selection No Information
19:00 - 20:00 Tine Team Fiv. )Dark Angel

View Mode

+24 Hours

Ch. Mode

Information k Page E Watch
[UC7000]BN68-02590D-Eng.indb 12

2010-04-02 3:39:22

Using Scheduled View
Using the colour buttons with the Channel Manager

03 Basic Features

Family Affairs 18:00 - 18:30
xx Red (Antenna): Toggle among Air or Cable. xx B Green (Zoom): Enlarges or shrinks a channel

number.

five five
Tanya confesses all to a stunned Babs. Conrad is anxious to hear.
Scheduled View 18:30 Today 19:15 Today )Family Affairs )Dark Angel
Yellow (Select): Select desired channels and press the Yellow button to set all the selected channels at the same time. The c mark appears to the left of the selected channels. Blue (Sort): Change the list ordered by channel name or channel number.

Information E Cancel

xx k (Page): Move to next or previous page. xx T (Tools): Displays the Channel Manager option
Channel Status Display Icons Icons A c * ( \ ) Operations An analogue channel. A channel selected. A channel set as a Favourite. A programme currently being broadcast. A locked channel. A reserved programme.
menu. (The options menus may differ depending on the situation.)
Red (View Mode): View the list of programmes that are playing now or coming up. Yellow (+24 Hours): Viewing the list of programmes to be broadcasted after 24 hours. Blue (Ch. Mode): Select the type of channels you want to display on the Channel View window. (All, TV, Radio, Data/Other, My Channel 1~4)
4 Information: Displays details of the selected programme. 5 k (Page): Move to next or previous page. 6 ENTERE button When selecting the current programme, you can watch the selected programme. When selecting the future programme, you can reserve to watch the selected programme. To cancel the schedule, press the ENTERE button again and select Cancel Schedules.
Guide Type (Samsung / Guide Plus+)
(depending on the country) You can select a different type of Guide. Samsung: Uses the guide programme by provided samsung. Guide Plus+: Uses the guide programme provided by Rovi International Solutions. For more information, refer to www.europe.guideplus.com.

Channel Manager

Delete or set favourites channels and use the programme guide for digital broadcasts. Select a channel in the Channels, My Channels or Scheduled screen.

All c1futech * 24ore.tv

Using Favourite Channels

* My Channels

Channels: Shows the channel list according to channel type.
* My Channels: Shows the group of the channel.
Scheduled: Shows all the currently reserved programmes. English
[UC7000]BN68-02590D-Eng.indb 13

Channels

Radio Data/Other Analogue

Select

BBC World bid-up.tv Boonerang Cartoon Nwk Class News \ Coming Soon Discovery
(in Channel Manager) Shows all favourite channels. Edit My Channels t: You can set the selected channels to desired my channels group.
The * symbol will be displayed and the channel will
be set as a my channel. 1. Select a channel and press the TOOLS button. 2. Add or delete a channel in the my channel groups you want among 1, 2, 3 and 4.

Antenna

Sort k Page T Tools
xx One or more groups can be selected.

2010-04-02 3:39:23

3. After you have changed the settings, the channel list for each group can be viewed in my channels.

c1futech * 24ore.tv

Edit My Channels Lock
Antenna Source (Air / Cable)t: Select the antenna source to memorise. Channel Source (Digital & Analogue / Digital / Analogue): Select the channel source to memorise.

Channel List

You can see all the channels searched.

Retuning Channels

Antenna (Air / Cable)
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

Country

The PIN input screen appears. Enter your 4 digit PIN number. Digital Channel: Change the country for digital channels. Analogue Channel: Change the country for analogue channels.

Auto Store

Automatically allocated programme numbers may not
Scans for a channel automatically and stores in the TV.
[UC7000]BN68-02590D-Eng.indb 14

BBC World

Timer Viewing bid-up.tv Timer Recording Boonerang Edit Channel Number Delete Cartoon Nwk
d Class News \ Coming Soon Discovery
When selecting Cable Digital & Analogue or Digital: Provide a value to scan for cable channels. Search Mode (Full / Network / Quick): Scans for all channels with active broadcast stations and stores them in the TV. If you select Quick, you can set up the Network, Network ID, Frequency, Modulation and Symbol Rate manually by pressing the button on the remote control.

Glasses. 3D Mode Off 2D 3D Side by Side Top & Bottom Line by Line Vertical Stripe Checker Board Frequency Operation Turns the 3D function off. Changes a 2D image to 3D. Displays two images next to each other. Displays one image above another. Displays the images for the left and right eye alternately in rows. Displays the images for the left and right eye alternately in columns. Displays the images for the left and right eye alternately in pixels. Displays the images for the left and right eye alternately in frames.
xx The ideal viewing distance should be three times
This exciting new feature enables you to 3D view 3D content. In order to fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses (SSG2100AB, SSG-2200AR, SSG- 2200KR) to view 3D video. Samsung 3D Active Glasses are sold separately. For more detailed purchasing information, contact the retailer where you purchased this TV.
Side by Side and Top & Bottom are available Vertical Strip, Line by Line and Checker
when the resolution is set to PC. when the resolution is 720p, 1080i and 1080p in DTV, HDMI and USB mode or set to PC connecting through HDMI/DVI cable.
Frequency displays the frequency (60Hz only)
Board are available when the resolution is set to PC connecting through HDMI/DVI cable.
3D 2D (Off / On): Displays the image for the left eye only.

3D emitter

This function is deactivated when 3D Mode set to

2D 3D or Off.

If there is any obstacle between the emitter and 3D
Active Glasses, the proper 3D effect may not be obtained. 3D Mode: Select the 3D input format.
3D View point: The overall adjustment of 3D perspective. to 2D 3D or Off.
This function is deactivated when 3D Mode is set This function is only activated when the 3D Mode

is 2D 3D.

Depth: Adjusts focus / depth in 2D 3D mode.
If you want to feel the 3D effect fully, please wear
the 3D Active Glasses first, and then select 3D mode from the list below that provides the best 3D viewing experience.

xx Data broadcasts (MHEG / MHP) are not supported

in 3D mode.

xx 3D Active Glasses from other manufacturers may not

be supported.

xx When the TV is initially powered on, may take some
time until the 3D display is optimized.
U Move E Enter e Exit U Move E Enter e Exit
xx The 3D Active Glasses may not work properly if there
is any other 3D product or electronic devices turned on near the glasses or TV. If there is a problem, keep other electronic devices as far away as possible from the 3D Active Glasses. its Game mode On, visually-sensitive viewers may see some flicker on bright images. mode only. displayed.
1. Press the CONTENT button, then the Content View menu will appear. 2. Press the or button, then select 3D. To watch in 3D, wear 3D Active Glasses and press the power button on the glasses. 3. Select OK, then press the ENTERE button. 4. Using the or buttons on your remote control, selects the 3D Mode of the image you want to view. on the format of the image source.
xx When watching pictures from a 50Hz 3D source with xx Photos of Media Play are shown in 2D 3D xx If lying on your side, the 3D-effects may not be xx Be sure to stay within the viewing angle and optimum
TV viewing distance when watching 3D pictures. Otherwise, you may not be able to enjoy proper 3D effects.
Some 3D modes may not be available depending
Supported formats and operating specifications for HDMI 1.4
Source signal format 1920x1080p@24Hz x 2 1280x720p@60Hz x 2 1280x720p@50Hz x 2 Standard HDMI 1.4 3D 1920x2205p@24Hz 1280x1470p@60Hz 1280x1470p@50Hz
[UC7000]BN68-02590D-Eng.indb 20

2010-04-02 3:39:28

Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.

Sound Menu

Setting up the TV with Your PC
Set the input source to PC.
Changing the Preset Sound Mode

SRS TheaterSound t

Standard: Selects the normal sound mode. Music: Emphasizes music over voices. Movie: Provides the best sound for movies. Clear Voice: Emphasizes voices over other sounds. Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.

xx TV Speaker: On, External Speaker: On xx TV Speaker: Off, External Speaker: On

A2 Stereo

NICAM Stereo
[UC7000]BN68-02590D-Eng.indb 22
If the stereo signal is weak and an automatic switching, Only activated in stereo sound signal. Only available when the Input source is set to TV.

Setup Menu

occurs, then switch to the mono.
Setting the On / Off Timer
Timer 1 / Timer 2 / Timer 3: Three different on / off timer settings can be made. You must set the clock first.

On Time Inactivate

Timer 1

Source Antenna

Channel

Setting the Time

Off Time Inactivate Volume
Clock: Setting the clock is for using various timer features of the TV.

Repeat

Mon Tue

Wed Thu

Fri Sat
OO The current time will appear every time you press

the INFO button.

L Move U Adjust E Enter R Return
If you disconnect the power cord, you have to set
the clock again. Clock Mode (Auto / Manual) Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.
The antenna must be connected in order to set

the time automatically.

Clock Set: Set the Day, Month, Year, Hour and Minute manually. Available only when Clock Mode is set to Manual.
Time Zone (depending on the country): Select your time zone. When Country is set to Others, you can use this function.
On Time / Off Time: Set the hour, minute, and activate / inactivate. (To activate timer with the setting youve chosen, set to Activate.) Volume: Set the desired volume level. Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV) Antenna (when the Source is set to TV): Select ATV or DTV. Channel (when the Source is set to TV): Select the desired channel. Contents (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically. NOTE

First, configure your network. For detailed
If the internet connection doesnt operate properly,
the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade.
procedures on using the Network Setup, refer to the Network Connection instructions.
[UC7000]BN68-02590D-Eng.indb 26

Connecting to a PC

Using an HDMI/DVI Cable / a D-sub Cable

04 Advanced Features

PC OUT
Display Modes (D-Sub and HDMI/DVI Input) Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode IBM MAC Resolution 640 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1080p Horizontal Frequency (KHz) 31.469 31.469 35.000 49.726 68.681 35.910 53.783 56.456 75.231 31.469 37.861 37.500 37.879 48.077 46.875 48.363 56.476 60.023 67.500 63.981 79.976 45.000 49.702 62.795 60.000 47.712 55.935 70.635 75.000 65.290 52.500 74.620 67.500 Vertical Frequency (Hz) 70.086 70.087 66.667 74.551 75.062 59.950 59.959 74.777 74.857 59.940 72.809 75.000 60.317 72.188 75.000 60.004 70.069 75.029 75.000 60.020 75.025 60.000 59.810 74.934 60.000 60.015 59.887 74.984 60.000 59.954 70.000 70.000 60.000 Pixel Clock Frequency (MHz) 25.175 28.322 30.240 57.284 100.000 32.750 81.750 95.750 130.000 25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 108.000 108.000 135.000 74.250 83.500 106.500 108.000 85.500 106.500 136.750 162.000 146.250 89.040 128.943 148.500 Sync Polarity (H / V) +/-/+ -/-/-/-/+ -/+ -/+ -/+ -/-/-/+/+ +/+ +/+ -/-/+/+ +/+ +/+ +/+ +/+ -/+ -/+ +/+ +/+ -/+ -/+ +/+ -/+ -/+ -/+/+

VESA CVT

VESA DMT
VESA GTF VESA DMT / DTV CEA
xx For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. xx The interlace mode is not supported. xx The set might operate abnormally if a non-standard video format is selected. xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
[UC7000]BN68-02590D-Eng.indb 27

2010-04-02 3:39:33

Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.

Network Setup (Manual)

Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu that appears, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support Tab, click the Details button. The Network connection values are displayed. How to set up manually

: Wired

Network
Network Type Network Setup Network Test SWL(Samsung Wireless Link) SWL connect
To set up your TVs cable network connection manually, follow these steps: 1. Follow Steps 1 through 6 in the How to set up automatically procedure. 2. Set Internet Protocol Setup to Manual. 3. Press the button on your remote to go to the first entry field. 4. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another. 5. When done, press the RETURN button on your remote. 6. Select Network Test to check the Internet connectivity.
4. On the Network screen, select Network Type. 5. Set Network Type to Wired. 6. Select Network Setup. The Network Setup screen appears.

Network Setup

Internet Protocol Setup IP Address Subnet Mask Gateway DNS DNS Server : Auto : : : : Auto :
7. Set Internet Protocol Setup to Auto. 8. Auto acquires and enters the needed Internet values automatically. 9. When done, press the RETURN button on your remote. 10. Select Network Test to check the Internet connectivity. 11. If the Network Function has not acquired the network connection values, go to the directions for Manual.
[UC7000]BN68-02590D-Eng.indb 29
Connecting to a Wireless Network
To connect your TV to your network wirelessly, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TVs back or side panel USB jack. See the illustration below.
To use the SWL(Samsung Wireless Link) function, connect to the USB 1 (HDD) port.
TV Rear Panel The LAN Port on the Wall Wireless IP sharer (AP having DHCP server) or
Samsung Wireless LAN Adapter LAN Cable
Samsungs Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts. com. Samsungs Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung recommends using IEEE 802.11N. When you play the video over a IEEE 802.11B/G connection, the video may not play smoothly.
xx You must use the Samsung Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless

network.

xx Samsungs Wireless LAN adapter is sold separately. The Samsung Wireless LAN adapter is offered by select

Test, the function will not start.
xx If you press (REC) on the remote control while the Channel Manager screen is being displayed or record with xx If a USB device dedicated to recording is connected, existing Timeshift Mode or recording files that were saved
abnormally will automatically be deleted. disabled.
Timer Recording, the TV may start or stop recording 1 or 2 seconds later than you intended due to the time needed to process the command.
xx If you switch to external input mode during recording, the recording will continue but the (REC) button will be xx If any function that turns off the TV (Sleep Timer, Off timer, etc.) is set for a time that conflicts with recording, the TV
will be turned off once the recording is complete.
[UC7000]BN68-02590D-Eng.indb 38

Videos

Playing Video 1. Press the or button to select Videos, then press the ENTERE button in the Media Play menu. 2. Press the /// button to select the desired file in the file list. 3. Press the ENTERE button or (Play) button. The selected file is displayed on the top with its playing time. If video time information is unknown, play time and progress bar are not displayed. During playing the video, you can search using the and button.
00:04:03 / 00:07:38 Movie 01.avi 1/1
In this mode, you can enjoy movie clips contained on a Game,
but you cannot play the Game itself. yy Supported Subtitle Formats
Name MPEG-4 time-based text SAMI SubRip SubViewer Micro DVD.ttxt.smi.srt.sub.sub or.txt File extension Format XML HTML string-based string-based string-based
E Chaptering L Jump T Tools R Return
yy Supported Video Formats
File Extension Container Video Codec Divx 3.11 / 4.x / 5.1 / 6.0 XviD *.avi *.mkv AVI MKV H.264 BP / MP / HP MPEG4 SP / ASP Motion JPEG Divx 3.11 / 4.x / 5.1 / 6.0 XviD *.asf ASF H.264 BP / MP / HP MPEG4 SP / ASP Motion JPEG *.wmv *.mp4 ASF MP4 Window Media Video v9 H.264 BP / MP / HP MPEG4 SP / ASP XVID *.3gp *.vro 3GPP VRO VOB H.264 BP / MP / HP MPEG4 SP / ASP MPEG1 MPEG2 MPEG1 *.mpg *.mpeg *.ts *.tp *.trp PS MPEG2 H.264 MPEG2 TS H.264 VC1 Resolution 1920x1080 1920x1080 1920x1080 1920x1080 800x600 1920x1080 1920x1080 1920x1080 1920x1080 800x600 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 Frame rate (fps) 6 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ / 25 / / 25 / / 25 / / 25 / ~ / 25 / ~ ~ 30 Bit rate (Mbps) AC3 / AAC / MP3 / DD+ / HE-AAC AC3 / MPEG / LPCM / AAC ADPCM / AAC / HE-AAC AC3 / MPEG / LPCM MP3 / ADPCM / AAC WMA MP3 / AC3 / LPCM / ADPCM / WMA MP3 / AC3 / LPCM / ADPCM / DTS Core Audio Codec

Sort by R Return
Internet@TV Settings: Edit and configure applications and Internet@TV settings.
Controls: Red (Login): To log in to Internet@TV. B Green (Markasfavourite): To mark the applications as a favourite. Blue (Sortby): To sort the applications. R Return: To return to the previous menu.
The colour buttons may work differently depending on the application.
[UC7000]BN68-02590D-Eng.indb 48

2010-04-02 3:39:51

Account Login For a application with multiple account, use and to access the different account.
System Setup Ticker Autorun (Off / On): Enable/disable ticker autorun upon powering on the TV. The Ticker application provides useful News, Weather, and Stock Market information. The Ticker application on Internet@TV must be downloaded to use this feature.

User account: Password:

Depending on your country, Ticker application
may have different service or not be supported.
Create [0~9] Enter PIN R Cancel
Channel Bound Service (Off / On): Some channels support applications as an Internet data service, allowing you to access the Internet service while watching TV. Only available if supported by the broadcaster.
For a more enjoyable application experience, register
Settings Internet@TV ID Create. 1. Press the Red button in Internet@TV home page. 2. Select desired User account, then press the ENTERE button.
For instructions on creating an account, refer to
and log in to your account.
Change the Service Lock password The default password set is 0-0-0-0.
If you forget the password, press the following
sequence of remote control buttons to reset the password to 0-0-0-0: POWER (off) MUTE 4 POWER (on).
If you want create account, press Red button;
then create account OSD window appear.
Reset: Resets Internet@TV settings to factory default settings. Internet@TV ID You can use this menu when creating, deleting the account. You can control your account including contents sites account information. Account is only for internet@TV.

3. Enter the Password.

When login succeeds, User account will be

displayed on the screen.

Setting up Internet@TV
Create: Create an account and link it with desired service applications. NOTE
Create IDs and configure Internet@TV settings from this screen. Highlight Settings using and buttons and press the ENTERE button.
xx Account will be made less than 10. xx Maximum number of characters is 8.
System setup Internet@TV ID Service Manager Properties Ticker Autorun Channel Bound Service Reset : Off : Off
Manager Service Site: Register login information for service sites. Change Password: Change account password. Delete: Delete the account. Service Manager: Delete and lock applications installed to Internet@TV. Lock: Lock the application. Accessing a locked application requires the password.

personal injury. Samsung is not liable for these kinds of accidents. the consumer fails to follow the product installation instructions.
xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or xx Do not mount the TV at more than a 15 degree tilt.
Product Family inches 19~22 23~29 LED-TV [Ultra-Slim] 32~37 40~55 56~65 VESA Spec. (A * B) 75 X X X X X 400 MStandard Screw M4 Quantity
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
[UC7000]BN68-02590D-Eng.indb 56

2010-04-02 3:39:59

Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use.

<TV Rear>

Please find a K icon on the rear of the TV. A kensington slot is beside
the K icon. To lock the product, follow these steps: 1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair. 2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable. 3. Insert the locking device into the Kensington slot on the product (1). 4. Lock the lock.

<Optional>

These are general instructions. For exact instructions, see the User manual supplied with the locking device. The locking device has to be purchased separately. The location of the Kensington slot may be different depending on the TV model.
Securing the TV to the wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided in the included Safety Flyer. For added stability and safety, install the anti-fall device as follows.

The picture is distorted: macro block error small block, dots, pixelization PC Connection A Mode Not Supported message appears. PC is always shown on the source list, even if a PC is not connected. The video is OK but there is no audio. Network Connection (Depending on Models) Wireless network connection failed.
Set your PCs output resolution and frequency so they match the resolutions supported by the TV (p. 27). This is normal; PC is always shown on the source list, regardless of whether a PC is connected. If you are using a HDMI connection, check the audio output setting on your PC.
Samsung Wireless USB dongle is required to use a wireless network. Make sure the Network Connection is set to Wireless (p. 30). Make sure the TV is be connected to a wireless IP sharer (router).
Recording / Timeshift The USB device is not recognized or a Device Format, Device Test or Device Performance Test fails. See the manual for the USB device to check that the USB device supports recording. If the USB device has a lock, ensure it is off. Check that the USB device can be formatted when connected to the PC. Connect the USB to the TV and format it. (Formatting may fail intermittently.) If a Device Performance Test or formatting failed, it means that there is a problem with the USB hardware or the performance of the USB hardware is too low. If the USB device has a lock, ensure it is off. Recover the USB device using the recovery function in Checking Device. Check that a USB device is connected. Check that the channel is a recordable digital channel. If the signal is weak or does not exist, the recording function will automatically be closed. The TV will not record if the USB device has no free memory space. Check that this is not the case. Check that a USB device is connected. Radio channels and analogue broadcasts are not supported. Data broadcast channels are not supported. If the signal is weak or does not exist, the Timeshift Mode function will automatically be closed. Timeshift Mode cannot be performed if the USB device has no free memory space. Check that this is not the case.
A message prompts me to format a USB device that has been working well. The recording function does not work.
Timeshift Mode does not work.
A message indicates a performance test failure, and the recording and Timeshift Mode functions do not work.
These problems may occur if you use a low-capacity USB device that does not support recording. We recommend using the USB HDD.

[UC7000]BN68-02590D-Eng.indb 59
A scheduled recording has failed.
A scheduled recording is disabled for certain operations (formatting, performance test, error checking, deleting) that access the file system of a USB device. If there is no USB device connected, the TV will not record even if the scheduled time is reached. The TV will not record if the USB device has no free memory space. Check that this is not the case. If you record a channel locked with Parental lock, the PIN input window will appear when you try to play back the recording. If multiple recording devices are connected and the device set as Default Recording Device has no free memory space, the recording function will be closed. Attempt recording again. The device with the most free memory space will automatically be set as Default Recording Device and the TV will start recording.
Several recording devices are connected but the TV stopped recording.
Others The picture wont display in full screen. HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV. Adjust the picture size options on your external device or TV to full screen. Replace the remote control batteries with the poles (+/) in the right direction. Clean the sensors transmission window on the remote. Try pointing the remote directly at the TV from 5~6 feet away. Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code. Check the supported resolution of the TV, and adjust the external devices output resolution accordingly. Refer to the resolution settings on page 26 of this manual. This smell is normal and will dissipate over time. This function is only available with digital channels from an Antenna / RF/Coax connection (p. 25). Remove the base stand from the TV and reassemble it. The Channel menu is only available when the TV source is selected. If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure. Press the SOURCE button to select TV mode, and go to MENU Setup Plug & Play (Initial setup) ENTERE (p. 7). Check the cable connections and reconnect them. Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors. This is part of the products design and is not a defect. PIP functionality is only available when you are using a HDMI, PC or components source (p. 25). If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot. If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again. It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your watching TV. Check and change the signal/source. To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.