LED TV user manual

Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. Comunquese con SAMSUNG WORLDWIDE Si desea formular alguna pregunta o comentario en relacin con los productos de Samsung, comunquese con el centro de atencin al cliente de SAMSUNG. Country CANADA Customer Care Center 1-800-SAMSUNG (726-7864) Web Site www.samsung.com Address Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada Samsung Electronics America, Inc. 85 Challenger 5RDG 5LGJHHOG 3DUN 1-

1-800-SAMSUNG (726-7864)

www.samsung.com

LED TV

user manual
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model _____________ Serial No. _____________
2010 Samsung Electronics Co., Ltd. All rights reserved.

BN68-02627A-07

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
See the warranty card for more information on warranty terms. Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ll the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on no expanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as well as burned in images, are not covered by your Samsung limited warranty. SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specied, and to the Original Purchaser only. The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product. Excluded, but not limited to, are any originally specied provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables. For the location of a SAMSUNG Authorized Service Center, please call toll-free: In the United States : 1-800-SAMSUNG (1-800-726-7864) In Canada : 1-800-SAMSUNG

Turns the TV on and off. Displays and selects the available video sources (p. 13).

ON/OFF SOURCE

Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to ON will reduce the battery usage time.)
Press to directly access channels.
Press to select additional channels (digital) being broadcasted by the same station. For example, to select channel 54-3, press 54, then press and 3.
Returns to the previous channel.

PRE-CH

Cuts off the sound temporarily.

Adjusts the volume.

CH LIST
Changes channels. Displays the channel list on the screen (p. 14).
CONTENT MENU INTERNET @ TV INFO
Brings up the OSD. Displays the Content View, which includes Channel List, Internet@TV, Media Play, AllShare and 3D. Quickly select frequently used functions.
Link to various internet services (p. 48).
Displays information on the TV screen. Selects the on-screen menu items and changes the values seen on the menu. Exits the menu.
Returns to the previous menu.

RETURN

Buttons used in the Channel List, Internet@TV, Media Play menu, etc.

MEDIA.P FAV.CH

YAHOO! P.SIZE CC
Use these buttons in Media Play and Anynet+ modes (p. 37, 44). (Q: Controls recording for Samsung recorders that have the Anynet+ feature)
MEDIA.P: Displays Media Play (p. 37). YAHOO!: Runs the Yahoo widget. (p. 52). 3D: Sets the 3D mode. (p. 20). FAV.CH: Displays Favorite Channel Lists on the screen (p. 14). P.SIZE: Selects the picture size (p. 18). CC: Controls the caption decoder (p. 26).
Installing batteries (Battery size: AAA)
Use the remote control within 23 feet from the TV. Bright light may affect the performance of the remote control. Avoid use when nearby fluorescent lights or neon signs. The color and shape may vary depending on the model.

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.

VHF/UHF Antenna

Antenna Cable (Not Supplied)

ANT OUT

Antenna Adapter (Supplied)
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in conguring basic settings. Press the POWERP button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
Selecting a language Selecting Store Demo or Home Use
Selecting an antenna Selecting a channel
Press the or button, then press the ENTERE button. POWER Select the desired OSD (On Screen Display) language. Press the or button, then press the ENTERE button. y Select the Home Use mode. Store Demo mode is for retail environments. y To return the units settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec. Press the or button, then press the ENTERE button. Select Air, Cable or Auto.

Press the or button, then press the ENTERE button. Select the channel source to memorize. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel Auto Program (p. 14). Press the ENTERE button at any time to interrupt the memorization process. Set the Clock Mode automatically or manually. y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone. y Manual: Allows you to manually set the current date and time (p. 24). The connection method for the best HD screen quality is displayed. Press the ENTERE button.
Setting the Clock Mode View the HD Connection Guide Enjoy the TV.
If You Want to Reset This Feature. MENUm Setup Plug & Play ENTERE
02 Connections Connecting to an AV Device
Using an HDMI or HDMI/DVI Cable: HD connection (up to 1080p) We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver

Device

HDMI Cable (Not Supplied)

HDMI OUT

HDMI to DVI Cable (Not Supplied)

DVI OUT

Audio Cable (Not Supplied)

AUDIO OUT

R-AUDIO-L
HDMI IN 1(DVI), 2(ARC), 3, 4, PC/DVI AUDIO IN

x x x x x x x

For better picture and audio quality, connect to a digital device using an HDMI cable. An HDMI cable supports digital video and audio signals, and does not require an audio cable. To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables. The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade. Be sure to use an HDMI cable with a thickness of 14 mm or less. Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur. A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet function via HDMI. This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note that the ARC function is supported by the HDMI IN 2(ARC) port only. If 3D Auto View is set to On, some functions such as Internet@TV may be disabled. In this case, set 3D Auto View or 3D Mode to Off. The ARC function allows digital audio to output via the HDMI IN 2(ARC) port. It can be enabled only when the TV is connected with an audio receiver that supports the ARC function.
Using a Component (up to 1080p) or Audio/Video (480i only) Cable Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

VESA CVT

VESA DMT
VESA GTF VESA DMT / DTV CEA

x x x x

For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. The interlace mode is not supported. The set may operate abnormally if a non-standard video format is selected. Separate and Composite modes are supported. SOG(Sync On Green) is not supported. English
Changing the Input Source

Edit Name

Source List
Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.

SOURCE

MENUm Input Edit Name ENTERE
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier. connected to the HDMI IN 1(DVI) port, you should set the TV to DVI PC mode under Edit Name. 1(DVI) port, you should set the TV to DVI PC or DVI Devices mode under Edit Name.
When a PC with a resolution of 1920 x 1080 @ 60Hz is O
MENUm Input Source List ENTERE
When connecting an HDMI/DVI cable to the HDMI IN
TV / PC / AV / Component / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB You can only choose external devices that are connected to the TV. In the Source List, connected inputs will be highlighted. In the Source List, PC is always activated.

How to Navigate Menus

Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions. 1

MENU INTERNET @ TV INFO

How to Operate the OSD (On Screen Display) The access step may differ depending on the selected menu.

CONTENT

/ ENTERE / /

RETURN EXIT

1 MENU button: Displays the main on-screen menu. 2 ENTERE / Direction button: Move the cursor and select an item. Conrm the setting. 3 RETURN button: Returns to the previous menu. 4 EXIT button: Exits the on-screen menu. ENTER E EXIT e
The main menu options appear on the screen: Picture, Sound, Channel, Setup, Input, Application, Support. Select an icon with the or button. Press ENTERE to access the sub-menu. Select the desired submenu with the or button. Adjust the value of an item with the or button. The adjustment in the OSD may differ depending on the selected menu. Press ENTERE to conrm the selection. Press EXIT.

Channel Menu

Using Favorite Channels

Seeing Channels

MENUm Channel Channel List ENTERE

Installing the Latest Version
TV Rear Panel By USB: Insert a USB drive containing the rmware upgrade le, downloaded from www. samsung.com, into the or TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. USB Drive The TV will be turned off and on automatically after completing the rmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to to write down your settings so that you can easily reset them after the upgrade.
By Online: Upgrade the software using the Internet.
First, configure your network. For detailed procedures on using the Network Setup, refer to the Network Connection instructions. If the internet connection doesnt operate properly, the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade.
Alternative Software (backup): Displays the software version downloaded through By Online. During the software upgrading, When the Upgrade will discontinue from last step, this function be activated.

Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.
Connecting to a Wired Network
You can attach your TV to your LAN using cable in three ways: y You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 cable. See the diagram below.
The Modem Port on the Wall TV Rear Panel
External Modem (ADSL / VDSL / Cable TV)
Modem Cable (Not Supplied)
LAN Cable (Not Supplied) LAN Adapter (Supplied)
y You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem. Use a Cat 5 cable for the connection. See the diagram below.
The Modem Port on the Wall External Modem (ADSL / VDSL / Cable TV) IP Sharer (having DHCP server) TV Rear Panel

LAN Cable (Not Supplied)

LAN Adapter (Supplied)
y Depending on how your network is congured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.
The LAN Port on the Wall TV Rear Panel
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Conguration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you dont have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TVs Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer. You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that support DHCP also let you use Static IP addresses.

8. To enter the Pass Phrase, follow these general directions: Press the number buttons on your remote to enter numbers. Use the direction buttons on your remote to move from button to button on the Security Key screen. Press the Red button to change case or display symbols/characters. To a enter letter or symbol, move to the letter or symbol, and then press the ENTERE button. To delete the last letter or number you entered, press the Green button on your remote.
9. When done, press the Blue button on your remote. The Network Connecting screen appears. 10. Wait until the connection conrmation message is displayed, and then press the ENTERE button. The Network Setup screen re-appears. 11. To test the connection, press the RETURN button to select Network Test, and then press the ENTERE button.
If the other methods do not work, you need to enter the Network setting values manually. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support tab, click the Details button. The Network settings are displayed. How to set up manually To enter the Network connection values manually, follow these steps: 1. Follow Steps 1 through 6 in the How to set up using PBC (WPS) (p. 34). 2. Press the button to select Internet Protocol Setup, and then press the ENTERE button. Press the or button to select Manual, and then press the ENTERE button. 3. Press the button to go to the rst entry eld (IP Address). 4. Use the number buttons to enter numbers. 5. When done with each eld, use the button to move successively to the next eld. You can also use the other arrow buttons to move up, down, and back. 6. Enter the IP Address, Subnet Mask, and Gateway values. 7. Press the or button to go to DNS. 8. Press the button to go to the rst DNS entry eld. Enter the numbers as above. 9. When done, press the button to go to Select a Network. Select your network, and then press the ENTERE button. 10. Go to Step 4 in the How to set up automatically (p. 34), and follow the directions from that point on.

Network Setup (Ad-Hoc)

You can connect to a mobile device without an access point through the Samsung Wireless LAN Adapter by using a peer to peer network.
This function is available when SWL (Samsung
How to connect to new Ad-hoc device
Wireless Link) is set to Off in the TVs on-screen menu.
1. Follow Steps 1 through 6 in the How to set up using PBC (WPS) (p. 34). 2. Choose Select a Network. A list of devices/networks appears. 3. While in the device list, press the Blue button on the remote.

must be connected to the wireless network.
If a Samsung Wireless Lan Adapter is connected to the Only sharers using the 2.4 Ghz band are supported.
Sharers using the 5 Ghz band are not supported.
USB 2 port, the network may not operate normally. We recommend connecting it to the USB 1 (HDD) port.

SWL connect

You can directly connect the TV to a Samsung device that supports PBC (WPS).
Wireless Link) is set to On.
To use the SWL (Samsung Wireless Link) function,
connect the Samsung Wireless LAN Adpater to the USB 1 (HDD) port. How to connect using Samsung Wireless Link To connect using Samsung Wireless Link, follow these steps: 1. Follow Steps 1 through 5 in the How to set up using PBC (WPS) (p. 34). 2. Select SWL(Samsung Wireless Link) by using the button, and then press the ENTERE button to turn it On. 3. Select SWL connect by using the button, and then press the ENTERE button. 4. If the Press the PBC button on the PBC(WPS) supported device to connect within 120 seconds. message appears, press the PBC button on the device to connect.
For more information, refer to the wireless network setup manual of the device to be connected.
5. If the TV connects properly to the device after the count in the message box starts, then the message box disappears automatically.
If the connection fails, please retry after 2 minutes.

Media Play

Enjoy photos, music and/or movie les saved on a USB Mass Storage Class (MSC) device.

0HGLD3OD\ Videos

MEDIA.P
MENUm Application Content View Media Play ENTERE

Change Device

View Devices E Enter R Return

Connecting a USB Device

1. Turn on your TV. 2. Connect a USB device containing photo, music and/or movie les to the USB 1 (HDD) or USB 2 port on the back or side panel of the TV. 3. When USB is connected to the TV, a popup window appears. Then you can select Media Play.

or TV Rear Panel

If an external USB device connected to the TVs USB port draws an excessive
amount of current from the port, the message USB Power overload appears on the screen. This is not a problem with the TV, which provides the standard current from its USB ports, but a problem with the external device. Please contact the manufacturer of the device for support.

Other Restrictions

If there are problems with the contents of a codec, the codec will not be supported. If the information for a Container is incorrect and the file is in error, the Container will not be able to play correctly. Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above. If the Index Table is in error, the Seek (Jump) function is not supported.
Video Decoder Audio Decoder Supports up to WMA 7, 8, 9, STD WMA 9 PRO does not support 2 channel excess multi channel or lossless audio. WMA sampling rate 22050Hz mono is not supported.
Supports up to H.264, Level 4.1 H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported. XVID, MPEG4 SP, ASP : Below 1280 x 720: 60 frame max Above 1280 x 720: 30 frame max GMC 2 over is not supported. H.263 is not supported. Only Samsung Techwin MJPEG is supported.
Playing movie continuously (Resume Play) If you exit the playing movie function, the movie can be played later from the point where it was stopped.
If you press the ENTERE button (Chaptering) during playing the file, you can explore scene divided into 5 chapters

you want.

If the index information is damaged or unsupported, you will not be able to use the Chaptering function.
1. Select the movie le you want to play continuously by pressing the or button to select it from the le list section. 2. Press the O (Play) / ENTERE button. 3. Select Play Continuously (Resume Play) by pressing the Blue button. The Movie will begin to play from where it was stopped.
Movie 01.avi 00:04:03 / 00:07:38 1/1
The Blue button is available when resuming play. If the Continuous Movie Play Help function is set to On in the Settings menu, a pop-up message will appear when you resume play a movie file.
3OD\ FRQWLQXRXVO\ Resumes playing from the last viewed scene.
3OD\ FRQWLQXRXVO\ E Chaptering L -XPS T Tools R Return
Playing Music 1. Press the or button to select Music, then press the ENTERE button in the Media Play menu. 2. Press the /// button to select the desired Music le in the le list. 3. Press the ENTERE button or O (Play) button. During music playback, you can search using the and button. R (REW) and (FF) buttons do not function during play.

Setup Message Media ScreenShare
0HVVDJH 0HGLD 6FUHHQ6KDUH 79 QDPH

2Q 2Q 2Q +RPH 79

Some types of characters may be displayed as blank or broken characters.
E Select R Return e Exit Setup R Return
Call Arrival Alarm If a call arrives while you are watching TV, the alarm window appears. Schedule Alarm While you are watching TV, the alarm window appears to display the registered event. You can configure viewing settings for schedule contents on your mobile phones. For the procedures, refer to the mobile phone manual. Using ScreenShare Function Using ScreenShare, you can browse various web contents provided by the mobile phone. For example, the image below displays an access page for contents on a mobile. You can read the mobiles les and view the phone book and calendar on the TV. Also, in the phone book, you can make a call to another person, or send to SMS.
You must have ScreenShare installed on your Samsung Mobile phone/device to use this feature. Doc Viewer can read files in doc format, but cannot modify them. The screen display may differ depending on the connected device.
Some special characters may be displayed as blank or broken characters.
Using the Media Function An alarm window appears informing the user that the media contents (videos, photos, music) sent from a mobile phone will be displayed on your TV. The contents are played automatically 3 seconds after the alarm window appears. If you press the RETURN or EXIT button when the alarm window appears, the media contents are not played.

My Mobile

If the media function executes for the first time, the warning popup window appears. Press the ENTERE button to select Allow, then you can use Media function on that device.
8QNQRZQ 'HYLFH LV UHTXHVWLQJ WKDW WKH PHGLD OH EH DOORZHG WR SOD\ ,I \RX ZLVK WR DOORZ WKH PHGLD OH WR EH SOD\HG DW \RXU GHYLFH SOHDVH SUHVV $OORZ RWKHUZLVH SUHVV 'HQ\ You can also change the setting (or resetting) of this feature at AllShare 6HWXS :DUQLQJ 3OHDVH QRWH WKDW LI \RXU GHYLFH LV FRQQHFWHG WR XQVHFXUHG RU XQIDPLOLDU QHWZRUN XQZDQWHG RU LQDSSURSULDWH FRQWHQWV PLJKW EH SOD\HG ,I \RX DUH QRW VXUH DERXW WKH QHWZRUN
V LGHQWLW\ RU FRQWHQWV DSSURSULDWHQHVV ZH VWURQJO\ UHFRPPHQG WKDW \RX GR QRW $OORZ WKH UHTXHVW WR SOD\ Contacts Calendar Doc Viewer E Select Return
Using your Samsung phone to control your TV Simply Before you can use this feature, you must connect to a Samsung mobile phone that supports ScreenShare functions. When operating the TV with your mobile phone, only the POWER, y, z and MUTE buttons are supported.
Even if you keep pressing down on a control button
(channel or volume) on the mobile phone, the value will only go up or down by one unit.
To turn off the media contents transmission from the mobile phone, set Media to Off in the AllShare setup. Contents may not be played on your TV depending on their resolution and format. The ENTERE and / buttons may not work depending on the type of media content. Using the mobile device, you can control the media playing. For details, refer to each mobiles users guide. When you want to play media contents from your PC, select the PC icon on the main display of AllShare. Then the TVs Media Play menu automatically changes. For more detail information, refer to Media Play (p. 37).

2. Firmly fasten the screw you provided (size M4xL20 or similar) to the wall or cabinet where the TV is to be installed.
If you fasten the screw to the wall, we recommend you drive the screw into a stud. If that is not possible, use a molly to anchor the screw. Install the TV close to the wall so that it does not fall. When attaching the TV-Holder cord to the wall, tie the cord level with the ground or slanted downwards for safety purposes. Check the cord occasionally to make sure it is secure. Before moving the TV, separate the connected cord first.
3. Tie the TV-Holder cord to the screw fastened on the wall or cabinet so that the TV is xed. See the illustrations below.
4. Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer. To purchase the TV-Holder Kit, contact Samsung Customer Care In the United States: 1-800-SAMSUNG (1-800-726-7864) In Canada: 1-800-SAMSUNG (1-800-726-7864)a

Troubleshooting

If the TV seems to have a problem, rst try this list of possible problems and solutions. If none of these troubleshooting tips apply, visit www.samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG. Issues

Poor picture

Solutions and Explanations
First of all, please perform the Picture Test and conrm that your TV is properly displaying the test image. (go to MENU - Support - Self Diagnosis - Picture Test) (p. 28) If the test image is properly displayed, the poor picture may be caused by the source or signal. If you have an analog cable/satellite box, upgrade to an HD digital set top box. Use HDMI or Component cables to deliver HD (high denition) picture quality. Cable/Satellite subscribers: Try HD stations from the channel line up. Antenna connection: Try HD stations after performing Auto program. Many HD channels are up scaled from SD(Standard Denition) contents. Adjust the Cable/Sat box video output resolution to 1080i or 720p. Compression of video contents may cause picture distortion, especially in fast moving pictures such as sports and action movies. Low signal level can cause picture distortion. This is not a TV problem. Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analog and digital TV. If youre using Component connection, make sure the component cables are connected to the correct jacks. Incorrect or loose connections may cause color problems or a blank screen. Adjust the Picture options in the TV menu (go to Picture mode / Color / Brightness / Sharpness) (p. 16) Adjust Energy Saving option in the TV menu (go to MENU Picture Eco Solution Energy Saving) (p. 16) Try resetting the picture to view the default picture settings (go to MENU - Picture - Picture Reset) (p. 22) If the picture size is set to Screen Fit, change it to 16:9 (p. 18). Change cable/satellite box resolution. If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV. If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box reboots. It may take up to 20 minutes) Set the output resolution of the cable box to 1080i or 720p.

The TV image does not look as good as it did in the store.
The picture is distorted: macro block error, small block, dots, pixelization.
Color is wrong or missing. There is poor color or brightness.
There is a dotted line on the edge of the screen. The picture is black and white. When changing channels, the picture freezes or is distorted or delayed. 3D The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or TV. You may notice a small amount of screen ickering when watching 3D images in poor light conditions (from a strobe light, etc.), or under a uorescent lamp (50Hz ~ 60Hz) or 3 wavelength lamp. The ideal viewing distance should be three times or more the height of the screen. If you leave 3D glasses on, battery lifespan is shortened.
If there is a problem, keep other electronic devices as far away as possible from the 3D Active Glasses.
If so, dim the light or turn the lamp off.
We recommend sitting with viewer's eyes on a level with the screen. Turn off 3D glasses while not using them.

Issues

Sound Problem
First of all, please perform the Sound Test to conrm that your TV audio is properly operating. (go to MENU - Support - Self Diagnosis - Sound Test) (p. 28) If the audio is OK, the sound problem may caused by the source or signal. Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV. Set the Speaker Select option to TV Speaker in the Sound menu (p. 23). If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV. If you are using an external device, check the devices audio output option (ex. you may need to change your cable boxs audio option to HDMI when you have a HDMI connected to your TV). If you are using a DVI to HDMI cable, a separate audio cable is required. If your TV has a headphone jack, make sure there is nothing plugged into it. Reboot the connected device by reconnecting the devices power cable. Check cable connections. Make sure a video cable is not connected to an audio input. For antenna or Cable connections, check the signal strength. Low signal level may cause sound distortion. Perform the Sound Test as explained above.

Set your PCs output resolution so it matches the resolutions supported by the TV (p. 12). This is normal; PC is always shown on the source list, regardless of whether a PC is connected. If you are using an HDMI connection, check the audio output setting on your PC.
Network Connection The wireless network connection failed.
The Samsung Wireless USB dongle is required to use a wireless network. Make sure the Network Connection is set to Wireless (p. 32). Make sure the TV is connected to a wireless IP sharer (router). Try network test in Setup menu (p. 27). If you have latest SW version, SW upgrade will not proceed.
Software Upgrade over the network fails. Others Purple/green rolling horizontal bars and buzzing noise from the TV speakers with Component cable connection. The picture wont display in full screen.
Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-top-box has a grounding issue. Replace the Component video cables with an HDMI connection. HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV. Adjust the picture size options on your external device or TV to full screen. Replace the remote control batteries with the poles (+/) in the right direction. Clean the sensors transmission window on the remote. Try pointing the remote directly at the TV from 5~6 feet away. Program the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code. Check the supported resolution of the TV, and adjust the external devices output resolution accordingly. Refer to the resolution settings on page 12 of this manual. Caption can not be selected in the TV menu when connected via HDMI or Component (p. 26). Caption must be activated on the external device (p. 26). This smell is normal and will dissipate over time. This function is only available with digital channels from an Antenna / RF/Coax connection (p. 28). Remove the base stand from the TV and reassemble it. The Channel menu is only available when the TV source is selected. If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the SOURCE button to select TV mode, and go to MENU Setup Plug & Play ENTERE (p. 8). Check the cable connections and reconnect them. Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are exible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90 degree connectors. This is part of the products design and is not a defect. PIP functionality is only available when you are using a HDMI, PC or Component source. Select Home Use under Plug & Play mode. For details, refer to Plug & Play Feature (p. 8).

Specications

Display Resolution Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Stand Swivel (Left / Right) Model Name Screen Size (Diagonal) Sound (Output) Dimensions (WxDxH) Body With stand Weight Without Stand With Stand 37.7 X 1.0 X 22.8 inches (957.4 X 26.5 X 578.7 mm) 37.7 X 10.5 X 25.5 inches (957.4 X 267.7 X 648.4 mm) 29.1 Ibs (13.2 kg) 34.0 Ibs (15.4 kg) UN40Cinches (40.0 inches measured diagonally) 1920 x 1080 50F to 104F (10C to 40C) 10% to 80%, non-condensing -4F to 113F (-20C to 45C) 5% to 95%, non-condensing -20 ~ 20 UN46Cinches (45.9 inches measured diagonally) UN55Cinches (54.6 inches measured diagonally) 15 W X 2 43.0 X 1.0 X 25.7 inches (1092.3 X 26.5 X 653.2 mm) 43.0 X 11.9 X 28.5 inches (1092.3 X 302.9 X 724.3 mm) 37.0 Ibs (16.8 kg) 42.1 Ibs (19.1 kg) 50.5 X 1.0 X 30.0 inches (1283.4 X 26.5 X 762.3 mm) 50.5 X 11.9 X 32.8 inches (1283.4 X 302.2 X 833.4 mm) 48.9 Ibs (22.2 kg) 54.0 Ibs (24.5 kg)

10 W X 2

Design and specifications are subject to change without prior notice. This device is a Class B digital apparatus. For information about power supply, and more about power consumption, refer to the label attached to the product.

Dimensions

Front view / Side view
(Unit: inches) Model name UN40C7000 UN46C7000 UN55C37.7 43.0 50.34.9 40.1 47.19.7 22.6 26.24.7 28.3 28.22.8 25.7 30.25.5 28.5 32.1.0 1.0 1.10.5 11.9 11.9
Jack panel detail / Rear view UN40C7000

UN46C7000 / UN55C7000

(Unit: inches) Model name UN40C7000 UN46C7000 UN55C15.7 15.7 15.15.7 15.7 15.26.2 29.4 35.3.7 4.0 4.2.5 3.6 3.15.3 9.7 9.3.5 4.5 4.10.7 12.1 12.0 0.7 2.0
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. 2010 Samsung Electronics America, Inc
AllShare Amplify Antenna Anynet+ AUDIO OUT Auto Adjustment Auto Volume 23
FAV.CH button Favorite Channel Film Mode Fine Tune Flesh Tone Frequency 7, 17 12
Receiver Recording Remote Control Repeat Mode RGB Only Mode Rotate 17 43
Background Music Balance L/R Basic View Batteries Black Tone Blanking Bracket Brightness 16 HDMI Home Theater 9, 44 11, 44
Select All Self Diagnosis Sharpness Signal Information Sleep Timer Slide Show Software Upgrade Source List Speaker Select Specications Standby mode Symbol 6 3
Installation Space Internet@TV 2 48
Cable Tie 4, 57 Change PIN 26 Channel Menu 14 Clock 24 Color Tone 18 Component 10 Connecting to a PC 12 Connecting to an Audio Device 11 Language License 26 64