COLOR NITE

Notes regarding the Video Head Cleaning
To ensure normal recording and a clear picture, clean the video heads regularly. If a square block-shape distorts playback, or only a blue screen is displayed, the video heads may be dirty. If this happens, clean the video heads with a dry type cleaning cassette. Do not use a wet-type cleaning cassette. It may damage the video heads.
Notes regarding Camcorder
Do not leave the Camcorder exposed to high temperatures (above 60 C or 140 F). For example, in a parked car in the sun or exposed to direct sunlight. Do not let the Camcorder get wet. Keep the Camcorder away from rain, sea water, and any other form of moisture. If the Camcorder gets wet, it may get damaged. Sometimes a malfunction due to exposure to liquids cannot be repaired. A sudden rise in atmospheric temperature may cause condensation to form inside the Camcorder. - When you move the Camcorder from a cold location to a warm location (e.g. from outside to inside during the winter.) - When you move the Camcorder from a cool location to a hot location (e.g. from inside to outside during the summer.) If the (DEW) protection feature is activated, leave the Camcorder for at least two hours in a dry, warm room with the cassette compartment opened and the Battery Pack removed.
Notices regarding Copyright
Television programmes, video tapes, DVD titles, films, and other programme materials may be copyrighted. Unauthorized copying of copyrighted material may be against the law. All the trade names and registered trademarks mentioned in this manual or other documentation provided with your Samsung product are trademarks or registered trademarks of their respective holders.
Servicing & Replacement Parts

I I I I I

Do not attempt to service this Camcorder yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer and having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

2. AC Power Adapter (AA-E9 TYPE)

3. Multi Cable

4. Instruction Book
5. Lithium Battery (CR2025)
6. Remote Control (VP-D363(i)/D364W(i)/ D365W(i) only)
7. USB Cable (VP-D362(i)/D363(i)/ D364W(i)/D365W(i) only)
8. Software CD (VP-D362(i)/D363(i)/ D364W(i)/D365W(i) only)

9. Lens Cover

10. Lens Cover Strap

Front & Left View

6. EASY.Q Button 7. Function Buttons 1. Lens
2. LIGHT (VP-D364W(i)/D365W(i) only) 3. Remote Sensor (VP-D363(i)/D364W(i) /D365W(i) only) 4. TAPE EJECT 5. Internal MIC

MULTI DISP.

8. TFT LCD Screen
1. Lens 2. LIGHT page 43 (VP-D364W(i)/D365W(i) only) 3. Remote Sensor (VP-D363(i)/D364W(i)/D365W(i) only) 4. TAPE EJECT 5. Internal MIC 6. EASY.Q Button page 35

7. Function Buttons

Button / I <Player> REW FF PLAY/STILL STOP <Camera> REC SEARCH REC SEARCH + FADE MF/AF <M.Player> (VP-D363(i)/D364W(i)/D365W(i) only) REV FWD S.SHOW (SLIDE SHOW) MULTI DISP. (MULTI DISPLAY)

Left Side View

1. DISPLAY

5. Viewfinder

COLO R NITE

2. MACRO/PB ZOOM

LIGH T

6. COLOR NITE

3. Speaker 4. Mode Switch (MEMORY/TAPE) (VP-D363(i)/D364W(i)/D365W(i) only) LIGHT (VP-D364W(i)/D365W(i) only)
1. DISPLAY page 21 2. MACRO/PB ZOOM page 39 / page 61 3. Speaker 4. Mode Switch (MEMORY/TAPE) (VP-D363(i)/D364W(i)/D365W(i) only)
5. Viewfinder 6. COLOR NITE page 42 LIGHT (VP-D364W(i)/D365W(i) only) page 43

Right & Top View

1. Zoom Lever (VOL/Menu Dial) 2. PHOTO Button

USB DV

8. Jack Cover 9. Jacks (See below)
3. QUICK MENU Button 4. MENU Button 5. Start/Stop Button 6. Power Switch

QU MEICK NU

PLAY E

10. Cassette Door

7. DC Jack

11. Hand Strap Hook

1. Zoom Lever (VOL/Menu Dial) 2. PHOTO Button page 57 3. QUICK MENU Button 4. MENU Button 5. Start/Stop Button 6. Power Switch (CAMERA or PLAYER)
7. DC Jack 8. Jack Cover 9. Jacks 10. Cassette Door 11. Hand Strap Hook

VP-D361(i) /D361W(i)

External MIC IEEE1394 Multi Cable
VP-D362(i)/ D363(i)/D364 External W(i)/D365W(i) MIC

IEEE1394

Multi Cable

Rear & Bottom View

3. Memory Card Slot (VP-D363(i)/D364W(i)/D365W(i) only)

QUICK MENU MENU

BATTERY RELEASE

1. Lithium Battery Cover

2. Charging Indicator

4. Tripod Receptacle

5. Battery Release
1. Lithium Battery Cover 2. Charging Indicator 3. Memory Card Slot (VP-D363(i)/D364W(i)/D365W(i) only) 4. Tripod Receptacle 5. Battery Release

Lithium Battery Installation for the Remote Control (VP-D363(i)/D364W(i)/D365W(i) only)
1. Pull out the Lithium Battery Holder toward the direction of the arrow using instruments such as a pair of tweezers. 2. Position the Lithium Battery in the Lithium Battery Holder, with the positive ( ) terminal face up. 3. Reinsert the Lithium Battery Holder.
Precaution regarding the Lithium Battery
1. The Lithium Battery maintains the clock function and preset contents of the memory; even if the Battery Pack or AC Power adapter is removed. 2. The Lithium Battery for the Camcorder lasts about 6 months under normal operation from time of installation. 3. When the Lithium Battery becomes weak or dead, the date/time indicator will display <00:00 1.JAN.2006> when you set the <Date/Time> to <On>. When this occurs, replace the Lithium Battery with a new one (type CR2025). 4. There is a danger of explosion if Battery is incorrectly replaced. Replace only with the same or equivalent type. Warning: Keep the Lithium Battery out of reach of children. Should a battery be swallowed, consult a doctor immediately.
Using the Lithium Ion Battery Pack
Use SB-LSM80 or SB-LSM160 Battery Pack only. The Battery Pack may be charged a little at the time of purchase.
Charging the Lithium Ion Battery Pack
1. Turn the [Power] switch to [Off]. Twice per second 50% ~ 75% 2. Attach the Battery Pack to the Camcorder. Three times per second 75% ~ 90% 3. Connect the AC Power adapter (AA-E9 TYPE) to a wall Blinking stops and stays on 90% ~ 100% socket. On for a second and Error - Reset the Battery Pack and 4. Connect the DC cable to the DC jack on the off for a second the DC Cable Camcorder. The charging indicator will start to blink, showing that the Battery is charging. 5. Press and hold the DISPLAY button while charging and the charging status will be Battery Info displayed on the LCD for 7 seconds. I As indicated the battery level is given as reference data for the user, it is the Battery charged 0% 50% 100% approximate estimation. It may differ from Battery capacity and temperature. 6. When the Battery is fully charged, disconnect the Battery Pack and the AC Power Adapter from the Camcorder. Even with the Power switched Off, the Battery Pack will still discharge.
Blinking time Once per second
Charging rate Less than 50%
Charging, Recording Times based on Model and Battery Type.

Charging

Recording time

Reviewing and Searching when Recording (REC SEARCH)
The REC SEARCH function works only in <Camera> mode. page 19 To be used to review previously recorded images or to find a point to record a new image in the STBY mode.
Record Search (REC SEARCH)
1. Set to STBY mode by pressing [Start/Stop] button. 2. [REC SEARCH -] enables you to play the recording backwards and [REC SEARCH +] enables you to play it forwards, as long as you keep each button pressed down. I If you press the [REC SEARCH -] button in STBY mode, your Camcorder will play in reverse for 3 seconds and return to the original position automatically. [ Notes ] Mosaic shaped distortion may appear on the screen while in Record Search mode. I Pressing [Start/Stop] button after REC SEARCH will overwrite the images recorded after that point.
When a cassette is loaded and the Camcorder is left in the STBY mode for more than 5 minutes without being used, it will switch off automatically. To use it again, press the [Start/Stop] button or set the [Power] switch to [Off] and then back to [CAMERA]. This auto power off feature is designed to save Battery power.
Searching a quickly for a desired scene (Setting the ZERO MEMORY) (VP-D363(i)/D364W(i)/D365W(i) only)
The ZERO MEMORY function works in both <Camera> and <Player> modes. page 19 You can mark a point on a tape that you want to return to following playback. 1. Set the [Power] switch to [CAMERA] or [PLAYER]. 2. Set the [Mode] switch to [TAPE].
3. Press the [ZERO MEMORY] button on the remote control before the recording or during playback at the point where you wish to return. I The time code is changed to a tape counter that is set to ZERO MEMORY with the < 0:00:00> (ZERO MEMORY indicator). I If you want to cancel the ZERO MEMORY function, press the [ZERO MEMORY] button again. 4. Finding the zero position. I When you have finished playback, fast forward or rewind the tape in stop mode. The tape stops automatically when it reaches the zero position. I When you have finished recording, set the [Power] switch to [PLAYER] and press the [ (REW)] button. The tape stops automatically when it reaches the zero position. 5. The tape counter with the < changed to the time code.
> (ZERO MEMORY indicator) disappears from the display and the tape counter is
[ Notes ] In the following situations, ZERO MEMORY mode may be cancelled automatically: - At the end of the section marked with the ZERO MEMORY function. - When the tape is ejected. - When you remove the Battery Pack or power supply. I The ZERO MEMORY may not function correctly where there is a break between recordings on the tape.

Applying Visual Effects The Visual Effect function works only in <Camera> mode. page 19 The Visual Effects enable you to give a creative look to your recording. Select the appropriate Visual Effect for the type of picture that you wish to record and the effect you wish to create. There are 10 Visual Effect modes.
1. <Art> mode This mode gives the images a coarse effect. 2. <Mosaic> mode This mode gives the images a mosaic effect. 3. <Sepia> mode This mode gives the images a reddish-brown pigment. 4. <Negative> mode This mode reverses the colours, creating a negative image. 5. <Mirror> mode This mode cuts the picture in half, using a mirror effect. 6. <BLK&WHT> mode This mode changes the images to black and white. 7. <Emboss1> mode This mode creates a 3D effect (embossing). 8. <Emboss2> mode This mode creates a 3D effect (embossing) on surrounding area of an image. 9. <Pastel1> mode This mode applies a pale pastel drawing effect to an image. 10. <Pastel2> mode This mode applies a pale pastel drawing effect to surrounding area of an image.
Selecting the Visual Effects
1. Set the [Power] switch to [CAMERA]. 4 2. Set the [Mode] switch to [TAPE]. (VP-D363(i)/D364W(i)/D365W(i) only) 3. Press the [MENU] button. I The menu list will appear. 4. Move the [Zoom] lever up or down to select <Camera>, then press the [OK] button. 5. Move the [Zoom] lever up or down to select <Visual Effect>, then press the [OK] button. 6. Move the [Zoom] lever up or down to select the desired Visual Effect option, then press the [OK] button. I The display mode is set to the selected mode. 7. To exit, press the [MENU] button. 6 [ Notes ] I The Pastel2, Emboss2, Mirror or Mosaic mode is not available while DIS or COLOR NITE is in use. I Visual Effect modes are not available while EASY.Q is in use. I Once DIS, EASY.Q or COLOR NITE is set, Emboss2, Pastel2, Mirror or Mosaic mode will be released. I 16:9 Wide modes are not available while Visual Effect is in use. 7 (VP-D361(i)/D362(i)/D363(i) only) I Mirror mode is not available in the 16:9 Wide mode. (VP-D361W(i)/D364W(i)/D365W(i) only) I Digital Zoom is not available in the Emboss2, Pastel2, Mirror or Mosaic mode. I Visual Effect modes other than Emboss2, Pastel2, Mirror or Mosaic mode is available while DIS is in use.
Camera Mode Back Program AE White Balance Visual Effect 16:9 Wide DIS Digital Zoom
Off Art Mosaic Sepia Negative Mirror

Zooming In and Out with Digital Zoom (Digital Zoom)
Maximum Digital Zoom works only in <Camera> mode. page 19 Zooming more than 33x is achieved digitally, up to 1200x when combined with optical zoom. The picture quality may deteriorate depending on how much you Digital Zoom in on the subject.
Selecting the Digital Zoom
1. Set the [Power] switch to [CAMERA]. 2. Set the [Mode] switch to [TAPE]. (VP-D363(i)/D364W(i)/D365W(i) only) 3. Press the [MENU] button. I The menu list will appear. 4. Move the [Zoom] lever up or down to select <Camera>, then press the [OK] button. 5. Move the [Zoom] lever up or down to select <Digital Zoom>, then press the [OK] button.
6. Move the [Zoom] lever up or down to select desired zoom value (Off, 100x, 200x, 400x or 1200x), then press the [OK] button. 7. To exit, press the [MENU] button. I Move the [Zoom] lever up or down to use the Digital Zoom. I The Digital Zoom indicator appears.
Off 100x 200x 400x 1200x Select
7 [ Notes ] Maximum Digital zooming may result in lower picture quality. I Digital Zoom is not available while DIS, EASY.Q, still image recording, COLOR NITE, 16:9 Wide, Emboss2, Pastel2, Mirror or Mosaic is in use. I Once still image recording, COLOR NITE, 16:9 Wide, Emboss2, Pastel2, Mirror or Mosaic is set, Digital Zoom mode will be released. (The Digital Zoom mode will be backed up.) I Once DIS or EASY.Q is set, Digital Zoom mode will be released.

Still Image Recording

1. 2. 3. Still image recording works only in <Camera> mode. page 19 A tape must be inserted as Still Images are recorded on a tape. Set the [Power] switch to [CAMERA]. Set the [Mode] switch to [TAPE]. (VP-D363(i)/D364W(i)/D365W(i) only) Press the [PHOTO] button. I The still image is recorded for about 6~7 seconds. 4. After the still image has been recorded, the Camcorder returns to its previous mode.
Searching for a still image
1. 2. 3. 4. 5. 6. The Photo Search works only in <Player> mode. page 19 Set the [Power] switch to [PLAYER]. Set the [Mode] switch to [TAPE]. (VP-D363(i)/D364W(i)/D365W(i) only) Press the [MENU] button. I The menu list will appear. Move the [Zoom] lever up or down to select <Tape>, then press the [OK] button. 6 Move the [Zoom] lever up or down to select <Photo Search>, then press the [OK] button. I / will flash on the LCD. Press the [/ (REW/FF)] buttons to search the still image. I The photo search process appears while you are searching. I After completing the search, the Camcorder displays the still image. I When there are no still images recorded on the tape, it will be fully rewound or forwarded. To exit, press the [I (STOP)] or [MENU] button.
Player Mode Tape Photo Search Photo Copy Audio Select Audio Effect

This function works only in <Player> mode. page 19 The [PLAY], [STILL], [STOP], [FF], and [REW] buttons are located on the Camcorder and the remote control. (VP-D363(i)/D364W(i)/D365W(i) only) The [F.ADV] (Frame advance), [X2], and [SLOW] buttons are located on the remote control only. (VP-D363(i)/D364W(i)/D365W(i) only) To prevent tape and head-drum wear, your Camcorder will automatically stop if it is left in still or slow modes for more than 3 minutes.

Playback Pause

Press the [/II (PLAY/STILL)] button during playback. To resume playback, press the [/II (PLAY/STILL)] button.
Picture Search (Forward/Reverse)
Press the [ (REW)] /[(FF)] buttons during playback or still mode. To resume normal playback, press the [/II (PLAY/STILL)] button. Keep pressing [ (REW)] / [(FF)] buttons during playback or still mode. To resume normal playback, release the button.
<VP-D363(i)/D364W(i)/D365W(i) only>
Slow Playback (Forward/Reverse) (VP-D363(i)/D364W(i)/D365W(i) only)
Forward Slow Playback - Press the [SLOW] button on the remote control during playback. - To resume normal playback, press the [/II (PLAY/STILL)] button. Reverse Slow Playback - Press the [ (-)] button during forward slow play back. - To resume forward slow playback, press the [ (+)] button. - To resume normal playback, press the [/II (PLAY/STILL)] button.
Frame Advance (To play back frame by frame) (VP-D363(i)/D364W(i)/D365W(i) only)
Press the [F.ADV] button on the remote control while in still mode. - Video sequence advances frame by frame each time you press the [F.ADV] button. - The F.ADV function works in still mode only. To resume normal playback, press the [/II (PLAY/STILL)] button. - Forward frame advance. Press the [F.ADV] button on the remote control in still mode. - Reverse frame advance Press the [ (-)] button on the remote control to change the direction in F.ADV mode. Press the [F.ADV] button on the remote control.
X2 Playback (Forward/Reverse) (VP-D363(i)/D364W(i)/D365W(i) only)
Forward X2 Playback - Press the [X2] button on the remote control during playback. - To resume normal playback, press the [/II (PLAY/STILL)] button. Reverse X2 Playback - Press the [ (-)] button during forward X2 playback. - To resume normal playback, press the [/II (PLAY/STILL)] button.

Reverse Playback (VP-D363(i)/D364W(i)/D365W(i) only)
To playback in reverse at normal speed, press the [ (-)] button during normal forward playback. Press the [/II (PLAY/STILL)] or [ (+)] button to return to normal forward playback.
[ Notes ] Mosaic shaped distortion may appear on the screen while in some of the various playback modes. Mosaic shaped distortion or noise may be experienced when you play back tapes recorded in LP which contain various playback functions. I Sound will only be heard during normal SP or LP playback.
Zooming during Playback (PB ZOOM)
The PB Zoom function works in <Player> mode. page 19 The PB Zoom function enables you to magnify the playback or still image. 1. Set the [Power] switch to [PLAYER]. 2. Set the [Mode] switch to [TAPE]. (VP-D363(i)/D364W(i)/D365W(i) only) 3. Press the [PB ZOOM] button in playback mode or in still mode. 4. The image is magnified starting from the centre of image. 5. You can zoom in from 1.2x to 8.0x by moving the [Zoom] lever. I Zoom ratio is not displayed. 6. To cancel the PB Zoom function, press the [PB ZOOM] or [I (STOP)] button. [ Notes ] The PB Zoom function enlarges the centre of the screen only. I You cannot apply the PB Zoom function to pictures which are being input from an external video source. I The PB Zoom image cannot be imported to your PC from the Camcorders DV jack. I The PB Zoom images cannot be exported to a PC. I Volume control is disabled while PB Zoom is in use.

PB Zoom 1.2X

Audio Dubbing (VP-D363(i)/D364W(i)/D365W(i) only)
The Audio Dubbing function works only in <Player> mode. page 19 You can not dub sound on a pre-recorded tape in LP or 16 bit mode. You can add sound to the original sound on a pre-recorded tape recorded in SP mode with 12bit sound. Use the internal or an external microphone(not supplied) or other audio equipment. The original sound will not be erased. 1. Set the [Power] switch to [PLAYER]. I If you want to use an external microphone, connect the microphone to the external MIC input jack on the Camcorder. 2. Set the [Mode] switch to [TAPE].

[ Notes ] You may use an S-Video connector on the cable to obtain better quality pictures if you have a S-Video connector on your TV. I Even if you use an S-Video connector, you need to connect an audio cable. I If you connect the cable to the AV/S jack, you will not hear sound from the Camcorder's speakers. I If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).
Connecting to a TV which has no Audio/Video Input Jacks
You can connect your Camcorder to a TV through a VCR. 1. Connect the Camcorder to your VCR with the Multi Cable. I The yellow jack: Video I The white jack: Audio(L) - Mono I The red jack: Audio(R) 2. Connect a TV to the VCR. 3. Set the [Power] switch to [PLAYER]. 4. Set the [Mode] switch to [TAPE]. (VP-D363(i)/D364W(i)/D365W(i) only) 5. Turn on both the TV and VCR. I Set the input selector on the VCR to Line. I Select the channel reserved for your VCR on the TV set. 6. Play the tape.
TV Signal flow Multi Cable Antenna
1. Connect a power source and set the [Power] switch to [PLAYER]. 2. Set the [Mode] switch to [TAPE]. (VP-D363(i)/D364W(i)/D365W(i) only) 3. Insert the tape you wish to play back. 4. Using the [ (REW)] /[(FF)] buttons, find the first position you wish to play back. 5. Press the [/II (PLAY/STILL)] button. I The images you recorded will appear on the TV after a few seconds. I If a tape reaches its end while being played back, the tape will rewind automatically. [ Notes ] The playback mode (SP/LP) is selected automatically. I If the VCR has an S-Video input terminal, you may use S-Video connector for better quality. I The S-Video connector transmits video only. Connect audio cables for sound. I If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).

Audio Effect

Audio Effect function works only in <Player> mode. page 19 Audio Effect provides various effects when the audio signals stored in a tape are playing. 1. Set the [Power] switch to [PLAYER]. 2. Set the [Mode] switch to [TAPE]. (VP-D363(i)/D364W(i)/D365W(i) only) 3. Insert the dubbed tape and press the [MENU] button. 4. Move the [Zoom] lever up or down to select <Tape>, then press the [OK] button. 5. Move the [Zoom] lever up or down to select <Audio Effect>, then press the [OK] button. 6. Move the [Zoom] lever up or down to select the audio effect channel, then press the 4 [OK] button. I <Voice>: It highlights the human voice from the audio signals. I <Music>: It highlights the music sound by enhancing the high and low pitched sounds from the audio signals. I <Wide>: It magnifies the stereo effect by enhancing the left and right sounds. I <Echo>: It gives an effect of echo sound heard inside a cave or on the mountain top. 7. To exit, press the [MENU] button. [ Notes ] It is recommended to use stereo type output devices (TV, speakers) for better audio effects. I The Audio Effect function is transmittable via external output terminals such and DV. I Audio Effect function is not available in USB Streaming mode. (VP-D362(i)/D363(i)/D364W(i)/D365W(i) only)

Photo Copy 2/46 25min 2/46

Photo Copy

Photo searching.
[ Note ] Still images copied from the cassette to the Memory Card are saved in 640x480 format.

Now copying. Photo Copy

Copies Files from the Memory Card to the Built-in Memory (Copy to) (VP-D365W(i) only)
The Copy to function works only in <M.Player> mode. page 19 You can copy selected or all images stored in the Memory Card to the built-in memory. 1. Set the [Power] switch to [PLAYER]. 2. Set the [Mode] switch to [MEMORY]. 3. Press the [MENU] button. I The menu list will appear. 4. Move the [Zoom] lever up or down to select <Memory>, then press the [OK] button. 5. Move the [Zoom] lever up or down to select <Copy to>, then press the [OK] button. 6. Move the [Zoom] lever up or down to select options (Back, This File or All Files), then press [OK] button. I To go back to the previous mode, select <Back>. I If <This File> or <All Files> is selected, <Now copying> is displayed and copying starts. 7. To exit, press the [MENU] button.

Memory Card Photo

2/46 Back This File All Files
Marking Images for Printing (Print Mark)
1. 2. 3. 4. 5. 6. 7. 8. 9. The Print Mark function works only in <M.Player> mode. page 19 This Camcorder supports the DPOF (Digital Print Order Format) print format. You can automatically print images recorded on a Memory Card with a printer supporting DPOF. There are 2 ways to make a Print Mark. - <This File> : You can set a print mark on the photo image displayed on the LCD Screen. It can be set up to 999. - <All Files> : To print 1 copy each of all of the stored images. Set the [Power] switch to [PLAYER]. 5 2/46 M.Player Mode Set the [Mode] switch to [MEMORY]. Memory Memory Type I The last recorded image appears. Memory Card M.Play Select Photo Using the [/ (REV/FWD)] buttons, search for the photo image that you want to mark. Delete Delete All Press the [MENU] button. Protect Off I The menu list will appear. Print Mark Move the [Zoom] lever up or down to select <Memory>, then press the [OK] button. ZOOM Move OK Select MENU Exit Move the [Zoom] lever up or down to select <Print Mark>, then press the [OK] button. Move the [Zoom] lever up or down to select desired option (All Off, This File or All Files), 7 2/46 M.Player Mode then press the [OK] button. Back If you select <This File>, move the [Zoom] lever up or down to select the quantity, then Memory Type 002 press the [OK] button. M.Play Select Delete To exit, press the [MENU] button.

Removing the Print Mark

To remove all Print Marks select <All Off>. To remove individual files Print Mark, select the file and set <This File> to <000>. [ Notes ] 9 I Direct accessing the Print Mark function is available simply using the [QUICK MENU]. page 20 I If the Print Mark is set to <This File>, you can set the number of copies from <000> to <999>. I If the Print Mark is set to <All Files>, you can set the number of copies to <1>. I The <All Files> option may require extended operation time depending on the number of stored images. I DPOF supporting printers are commercially available. I Use the USB cable provided with the Camcorder.

USB Interface (VP-D362(i)/D363(i)/D364W(i)/D365W(i) only)
Using USB Interface (VP-D362(i)/D363(i)/D364W(i)/D365W(i) only) Transferring a Digital Image through a USB Connection
The Camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification) You can transfer a recorded file in Memory Card to a PC via a USB connection. (VP-D363(i)/D364W(i)/D365W(i) only) If you transfer data to a PC, you need to install the software (DV Driver, Video Codec, DirectX 9.0) supplied with the Camcorder.
USB Connection Speed depending on the System
High speed USB connection is supported by Microsoft (Windows) device drivers only. I Windows 98SE/ME - Full Speed USB I Windows 2000 - High speed USB on a system with Service Pack 4 or later installed. I Windows XP - High speed USB on a system with Service Pack 1 or later installed.
CPU OS(Operating System) Memory HDD capacity Resolution USB
Windows System Minimum Intel Pentium III, 600MHz Windows 98SE/ME 128MB 1GB or more 1024 x 768 dots 24bit Colour USB1.1 Recommended Intel Pentium 4 , 2GHz Windows 2000/XP 512MB 2GB or more 1024 x 768 dots 24bit Colour USB2.0 High Speed
I It is not available for Macintosh systems. [ Notes ] I I I I I I I I I I I I
USB 2.0 works for removable disk and USB streaming functions. On a slower PC than recommended, movie playback may not be smooth or video editing may take a long time. On a slower PC than recommended, movie playback may skip frames or operate unexpectedly. Intel Pentium III or Pentium 4 is a trademark of the Intel Corporation. Windows is a registered trademark of the Microsoft Corporation. All other brands and names are property of their respective owners. Operations are not guaranteed for all of the recommended computer environments mentioned above. Do not connect the Camcorder to a PC using both DV and USB cables. It may not operate properly. In <M.Cam> or <M.Player> mode, be sure that the Memory Card is inserted into Camcorder before connecting USB cable. If no Memory Card or an unformatted Memory Card is inserted, PC will not recognize your Camcorder as a removable disk. (VP-D363(i)/D364W(i)/D365W(i) only) USB Streaming requires Video Codec, DV Driver and DirectX 9.0. If you disconnect the USB cable from the PC or the Camcorder during the data transfer, the data transfer will stop and the data may be damaged. If you connect the USB cable to a PC using a USB HUB or with other devices at the same time, it may cause conflict and may not work properly. If this occurs, remove all other USB devices and try the connection again.
Selecting the USB Device (USB Connect) (VP-D363(i)/D364W(i)/D365W(i) only)

(blue screen)

3. Insert the cleaning tape. 4. Press the [/II (PLAY/STILL)] button. 5. Press the [I (STOP)] button after 10 seconds. [ Notes ] Check the quality of the picture using a videocassette. - If the picture quality has not improved, repeat the operation. I Clean the video heads with a dry type cassette cleaner. I Some cleaning cassette products stop automatically. Refer to the cleaning cassettes instructions for detailed information. If the problem continues after the cleaning, consult your nearest Samsung dealer or Authorized Service Centre. (blue screen)
Using Your Camcorder Abroad
Each country or region has its own electric and colour systems. Before using your Camcorder abroad, check the following items.

Power sources

You can use your Camcorder in any country or area with the supplied AC Power adapter within 100V to 240V, 50/60 Hz. Use a commercially available AC jack adapter, if necessary, depending on the design of the local wall outlet.

Colour system

You can view your recording in the Viewfinder. However, to view it on a television or copy it to a videocassette recorder, the television or VCR must be PAL-compatible and have the appropriate audio/video jacks. Otherwise, you may need to use a transcoder.
PAL-compatible Countries/Regions Australia, Austria, Belgium, Bulgaria, China, CIS, Czech Republic, Denmark, Egypt, Finland, France, Germany, Greece, Great Britain, Holland, Hong Kong, Hungary, India, Iran, Iraq, Kuwait, Libya, Malaysia, Mauritius, Norway, Romania, Saudi Arabia, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Syria, Thailand, Tunisia, etc. NTSC-compatible Countries/Regions Bahamas, Canada, Central America, Japan, Korea, Mexico, Philippines, Taiwan, United States of America, etc.
[ Note ] You can make recordings with your Camcorder and view pictures on the LCD Screen from anywhere in the world.

Troubleshooting

Before contacting a Samsung authorized service centre, perform the following simple checks. They may save you the time and expense of an unnecessary call.

Self Diagnosis Display

Display Blinking slow Tape end! Tape end! No Tape! slow no slow Informs that. Action the Battery pack is almost discharged. Change to a charged one. When the remaining time on the tape is about 2 minutes. the tape reached its end. there is no tape in Camcorder. the tape is protected from recording. Prepare a new one. Change to a new one. Insert a tape. If you want to record, release the protection.

E. Se perivptwsh pou den upavrcei eqnikhv nomoqesiva authv h egguvhsh qa eivnai h monadikhv kai apokleistikhv kavluyh tou katanalwthv gia kavqe zhmiav.

FOURLIS TRADE A.E.B.E.

Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Region Country

North America

Customer

CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA TRINIDAD & TOBAGO VENEZUELA BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN U.K RUSSIA UKRAINE AUSTRALIA CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA PHILIPPINES SINGAPORE THAILAND TAIWAN VIETNAM SOUTH AFRICA U.A.E

Care Centre

1-800-SAMSUNG (7267864) 01-800-SAMSUNG (7267864) 1-800-SAMSUNG (7267864) 0800-333-3733 0800-124-421 800-726-7864(SAMSUNG) 0-800-507-7267 1-800-10-7267 800-6225 1-800-299-0013 1-800-234-7267 800-7267 1-800-682-3180 1-800-751-2676 1-800-7267-864 1-800-100-65 (0,15/Min) 01805 - 121213 ( 0,12/Min) 88 ( 0.10/Min) 0303 8-800-200-0400 8-800-502-800-810-5858, 010- 11 0800-112-8888 0120-327-527 1800-88-9999 1800-10-SAMSUNG (7267864) 1800-SAMSUNG (7267864) 1800-29-3232 02-689-3232 0800-329-7267864 (SAMSUNG) 800SAMSUNG (7267864) www.samsung.com/ca www.samsung.com/mx www.samsung.com www.samsung.com/ar www.samsung.com/br www.samsung.com/cl www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/be www.samsung.com/cz www.samsung.com/dk www.samsung.com/fi www.samsung.com/fr www.samsung.de www.samsung.com/hu www.samsung.com/it www.samsung.lu www.samsung.com/nl www.samsung.com/no www.samsung.com/pl www.samsung.com/pt www.samsung.com/sk www.samsung.com/es www.samsung.com/se www.samsung.com/uk www.samsung.ru www.samsung.com/ur www.samsung.com/au www.samsung.com.cn www.samsung.com/hk www.samsung.com/in www.samsung.com/id www.samsung.com/jp www.samsung.com/my www.samsung.com/ph www.samsung.com/sg www.samsung.com/th www.samsung.com/tw www.samsung.com/vn www.samsung.com/za www.samsung.com/mea

Web Site

Latin America

Europe

Asia Pacific

Middle East & Africa

THIS CAMCORDER IS MANUFACTURED BY:

AD68-00970G