Page 12

OSD (On Screen Display)
1 You can turn the OSD on/off by setting the Display menu on/off. 1 The TITLE, DATE/TIME, EASY and CUSTOM functions can be operated even after the OSD is turned off. 1 The OSD is displayed in the viewfinder and the monitor. a. Zoom position (see page 29) Indicates zoom position. b. DIS (VP-W87/W87D only) (see page 33) Indicates DIS is activating. c. Battery level (see page 21) Indicates the power left in the battery. ( ) d. Manual Focus (see page 34) Indicates manual focus is on. Auto Focus is not displayed. e. BLC (see page 35) Indicates BLC is activating. f. Program AE (see page 36) Indicates Program AE mode is activating. ( , , , , ) g. Self record waiting timer. (VP-W87/W87D only) (see page 15) Indicates 10 seconds timer. h. Self record recording timer. (VP-W87/W87D only) (see page 15) (30 seconds or END). i. Date (see page 40) Displays the date of the recording.

OSD in CAMERA mode

ab c m f v e d g h

W SEPIA T XX

Hi x REC. 0:00:00 EASY

CONGRATULATIONS TAPE!

o n p x q k l j i
WAIT-10S (TITLE) SELF-30S (CONTINUE)

13:00 29. JAN.2003

OSD in PLAYER mode
SEPIA Hi 8 PLAY 0:00:00 Z.RTN

o n u q

Page 13
j. k. l. m. n. o. p. q. r. s. t. u. v. w. x. Time (see page 40) Shows the time of the recording. Title (see page 42) Shows the title of the recording. It is superimposed on the scene. Self diagnosis (see page 57) (TAPE!, TAPE END!, PROTECTION!) Checks the operation of the Camcorder. DSE (Digital Special Effect) (see page 38) Indicates the DSE mode is active. The operation modes are GHOST, STROBE, SEPIA, B&W, NEG., MIRROR, ART, MOSAIC, 16:9 (WIDE) and CINEMA. Tape counter Shows amount of the tape used. Operation mode Indicates depending on which operating mode is active. ), FF( ), REW( ), EJECT. The operation modes are STBY, REC , STOP, PLAY( EASY & CUSTOM Shows when the EASY or CUSTOM mode is active. ) condensation (see page 60) DEW( Visable if moisture or condesation is detected within the camera. Digital zoom (see page 29) Shows the digital zoom is active. Snap Shot (VP-W87/W87D only) (see page 46) Shows the remaining available time for Snap Shot recording. PB DSE (see page 54) Shows that the PB DSE mode is active. Zero return (VP-W87/W87D only) (see page 53) Shows that the zero return function is active. White Balance mode (see page 47) Shows which White Balance mode is active. ) and OUTDOOR( ). The White Balance modes are AUTO, INDOOR( Hi8 (VP-W80/W87/W87D only) Indicates the use of the Hi8 tape in CAMERA or PLAYER modes. In case of not being tape, display Hi8 on the screen in CAMERA or PLAYER modes. Remocon ( OFF) (VP-W87/W87D only) Indicates the remocon off mode is activated.

Page 14

Accessories Supplied with Camcorder
Make sure that the following basic accessories are supplied with your camcorder. Basic Accessory 1. 2. 3. 4. 5. 6. 7. AC Power Adapter. (see page 18) AC cord. (see page 18) Battery Pack. (see page 19) Audio/Video Cable. (see page 51) Shoulder strap. (see page 17) Instruction Book. Remote Control. (VP-W87/W87D only, see page 15) 8. Lithium Battery for Remote Control. (VP-W87/W87D only, see page 15) Lithium Battery for Clock. (TYPE: CR2025, see page 17)
1. AC Power Adapter 2. AC cord 3. Battery Pack

4. AUDIO/VIDEO Cable

5. Shoulder Strap

6. Instruction Book

Video Camcorder 8mm

7. Remote Control

ST ST ART/ OP DIS SE TIM LF ER ST ILL PL AY CO RE UNTE SE R T WI DE

8. Lithium Batteries

RE ZERO TU RN
Optional Accessory 9. Scart adapter. (see page 51) 10. S-VIDEO cable (VP-W80/W87/W87D only, see page 52)

9. Scart adapter

10. S-VIDEO Cable
Note: Optional accessories may be included with the camcorder, depending on the country in which it is purchased.

Page 15

Remote Control (VP-W87/W87D only)
Description of Parts 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Start/Stop (see page 23) Self Timer Still (see page 53) WIDE (see page 28) TELE (see page 28) Display (see page 12) (Play) (see page 52) (FF) (see page 53) (REW) (see page 53) (Stop) (see page 52) Counter Reset (see page 53) Zero Return (see page 53)
START/ STOP DISPLAY COUNTER RESET WIDE SELF TIMER ZERO STILL RETURN
Battery Installation to the Remote Control 1 You must insert or replace this battery when: - You purchase the camcorder. - The remote control doesnt work. 1 Insert Lithium Battery, following the + and - markings. 1 Be careful not to reverse the polarity of the battery. Self Recording with the Remote Control 1 The Self Timer function on the remote control allows you to start and stop recording automatically. Example: recording yourself 1 Two options are available - WAIT-10S/SELF-30S: wait 10 seconds, followed by 30 seconds of recording. - WAIT-10S/SELF-END: wait 10 seconds, followed by recording until you press the START/STOP button again.

Page 16

1. Set power switch to CAMERA.

CAMERA

2. Press Self Timer button until the appropriate indicator is displayed on the Viewfinder: s WAIT-10S/SELF-30S s WAIT-10S/SELF-END 3. Press START/STOP button to start the timer. :After approximately 10 seconds, recording starts. :If you have selected SELF-30S, recording stops automatically after 30 seconds. :If you have selected SELF-END, press the START/STOP again when you wish to stop recording.

START/ STOP DISPLAY

COUNTER RESET

SELF TIMER

ZERO STILL RETURN

WAIT-10S SELF-30S

Note: When using the timer, pressing the START/STOP button again, cancels the function.
Adjusting the Hand Strap and Shoulder Strap

Hand Strap

1 It is very important to adjust the hand strap correctly to ensure the camera can be held securely. 1 The hand strap enables you to: - Hold the camcorder in a stable, comfortable position. - Press the Zoom and the red Record button without having to change the position of your hand. 1. Pull open the Hand Strap cover and release the Hand Strap, adjust its length and stick it back onto the Hand Strap cover. 2. Close the Hand Strap cover when finished.

Page 17

Shoulder Strap
1 The Shoulder Strap allows you to carry your camcorder with complete safety. 1. Insert each end of the strap into the hooks on the camcorder. 2. Put the end of each strap through the buckle, adjust the length of the strap, then pull it tight in the buckle.
Lithium Battery Installation
1 The lithium battery maintains the clock function, title and preset contents of the memory; even if the battery pack or AC power adapter is removed. 1 The lithium battery for the camcorder lasts about 8~10 months from the time of installation under normal operation. 1 When the lithium battery becomes weak or dead, the date/time indicator flashes about 5 seconds when you set the power switch to CAMERA. In this case, replace the lithium battery with type CR2025 Lithium button cell. 1. Remove the Lithium battery holder from the base of the camera. 2. Insert the side of the lithium battery toward the bottom of the holder. 3. Reinsert the lithium battery holder into the slot on the base of the camera. Note: The battery holder will only fit one way to avoid possible incorrect insertion.
Warning: Keep LITHIUM BATTERIES out of the reach of the children. Should any battery be swallowed, consult a doctor immediately.

Page 18

Connecting a Power Source
1 There are two types of power source available. - Using the AC Power Adapter : used for indoor recording. - Using the Battery Pack: used for mobile recording. To use the AC Power Adapter

CAMERA 3

1. Connect the AC Power Adapter to a AC cord. 2. Connect the AC cord to a wall socket. Note: The plug and wall socket type can be different according to the regional conditions. 3. Connect the other end of the DC cable to DC jack of the camcorder. 4. To set the camcorder to CAMERA mode. a. Hold down the tab of the power switch and push the switch to CAMERA mode. b. Make sure that the Lens Cap is opened. c. Make sure that the image appears in the Viewfinder. Note: If the adapter is used next to the TV or the camcorder, it may cause the TV or camcorder to emit noise. Move the adapter away from the TV, camcorder or the antenna cable.

Tips for Battery Identification.
Acharge mark is provided on the battery pack to help you remember whether it has been charged or not. Two colours are provided (red and black)-you may choose which one indicates charged and which indicates discharged.

Page 22

Inserting and Ejecting a Cassette
1 There are several cassette types, depending on: - Colour system used - Recording/Playback time - Hi8/8mm (VP-W80/W87/W87D is Hi8)
1 Check to see if the battery pack is in place or AC adapter is connected. 1. Press the EJECT button for Ejecting the Cassette Holder. - The compartment opens automatically. - Insert the cassette with the transparent window facing outward and the protection tab toward the top. 2. Press the are labelled 'PUSH' until the compartment clicks into place.

TAPE EJECT

Note: When you have recorded a cassette that you wish to keep, you can protect it from being accidentally erased. a. Protecting a recording: Slide the red tab on the cassette so that it covers the hole.
b. Unprotecting a recording: If you no longer wish to keep the recording on the cassette, slide the red tab back so that it no longer covers up the hole.

Page 23

Making the First Recording
Please check the following before recording. s Have you connected a power source? (Battery Pack or AC Power Adapter)

BATTERY

s Have you set the power switch to the CAMERA position?
s Have you inserted a cassette? (see page 22) s Make sure that STANDBY is displayed in the OSD (if the red tab of the cassette is covering the hole, STANDBY will not be displayed) s Have you removed the LENS CAP? s Make sure that the image you want to record is visable in the Viewfinder. s Make sure that there is enough remaining power for the expected recording time. (see page 21) s We recommend that beginners, who are using the camcorder for the first time, switch the EASY mode on. a. To start recording, press the red START/STOP button. Recording starts and REC is displayed in the Viewfinder.

REC X:XX:XX

Page 24
b. To stop recording, press the red START/STOP button again. When recording stops, STANDBYwill be displayed on the Viewfinder.

3. Turn the UP/DOWN dial to D. ZOOM.
MENU DIS.OFF D.ZOOM.OFF PIP.OFF DISPLAY.ON WHITE BAL.AUTO WL.REMOCON.ON CUSTOM SET
4. Press ENTER. s The DIGITAL ZOOM setting will change. 5. Press the MENU ON/OFF button to end setting.
EXIT: MENU MENU DIS.OFF D.ZOOM.ON PIP.OFF DISPLAY.ON WHITE BAL.AUTO WL.REMOCON.ON CUSTOM SET EXIT: MENU

In case of VP-W80U/W80

1. Set the power switch to CAMERA mode. 2. Press the D. ZOOM ON/OFF button. s The DIGITAL ZOOM will be displayed on the screen, and the DIGITAL ZOOM function will operate. 3. To deactivate DIGITAL ZOOM function, press the D.ZOOM button again. s The DIGITAL ZOOM indicators disappear from the screen. Note:

D.ZOOM

The D. ZOOM ON/OFF function will not operate in EASY mode.

Page 31

EASY Mode (for Beginners)
1 Even a beginner can easily make a recording using the EASY mode. s The EASY mode only operates in CAMERA mode.
1. Set the power switch to CAMERA mode. 2. By pressing the EASY button, all the functions of the camera will be set to off and the recording settings will be set to the following basic mode. s Battery level, recording mode, counter, date/time, DIS ( ) will be displayed as the camcorder starts to run. s The word EASY will appear in the Viewfinder at the same time. However, the Date/Time will only be seen if it has been previously set. (DIS ( ) will be displayed on VP-W87/W87D only) 3. Press the START/STOP button to start recording. s Recording will begin using the basic automatic environment settings. 4. Pressing the EASY button again turns the EASY mode off. s The camera will return to the settings that were set prior to the EASY mode being switched on.

STBY X:XX:XX EASY

31. JAN. 2003
Notes: s In the EASY mode, the MENU, MF, DSE, P.AE and BLC functions are not available. s If you want to use these functions, you must first switch the EASY mode off. s The EASY settings will be stored in the camera (providing a good lithium battery has been installed).

Page 32

CUSTOM-Creating your own customized recording settings
1 You can customize the settings and save them for future use. s The CUSTOM function only operates in CAMERA mode. 1. Set the power switch to CAMERA mode. 2. Press the MENU ON/OFF button, to bring up the MENU list. 3. Turn the UP/DOWN dial until CUSTOM SET is highlighted. 4. Press the ENTER button, the CUSTOM menu will appear. s Set the status of each item to what you want. 5. To exit the menu, press the MENU ON/OFF button twice. 6. By pressing the CUSTOM button, the CUSTOM settings will come up. s Date/Time and Title will only appear if these have been set in advance. s The word CUSTOM will be displayed on the Viewfinder at the same time. Example: When the CUSTOM SET is set as follows;

CUSTOM SETTING DIS..ON PIP..ON D.ZOOM.ON WHITE BAL.INDOOR DATE/TIME..DATE/TIME PROGRAM AE. DSE SELECT.B&W EXIT: MENU 880x B&W Hi 8 STBY 0:00:02 CUSTOM MENU DIS.OFF D.ZOOM.OFF PIP.OFF DISPLAY.ON WHITE BAL.AUTO WL.REMOCON.ON CUSTOM SET EXIT: MENU MENU DIS.OFF D.ZOOM.OFF PIP.OFF DISPLAY.ON WHITE BAL.AUTO WL.REMOCON.ON CUSTOM SET EXIT: MENU CUSTOM SETTING DIS..ON PIP..OFF D.ZOOM.OFF WHITE BAL.AUTO DATE/TIME..OFF PROGRAM AE.AUTO DSE SELECT.OFF EXIT: MENU
Pressing the CUSTOM button, displays
CONGRATURATION TITLE 0:00 CONTINUE 1.JAN.2003
7. Press the START/STOP button to start recording. s Recording will begin using the new CUSTOM settings. 8. To switch Custom off, press the CUSTOM button once. s The camera will revert to the settings that were set prior to the CUSTOM mode being switched on. Notes:
The CUSTOM settings will be stored in the camera (providing a good lithium battery has been installed).

Page 33

DIS (Digital Image Stabilizer, VP-W87/W87D only)
1 The DIS function works in CAMERA mode only. 1 DIS (Digital Image Stabilizer) is a handshake compensation function that compensates for any shaking or moving of the hand holding the camcorder (within reasonable limits). 1 It provides more stable pictures when: s Recording with the Zoom. s Recording a small object close-up s Recording and walking at the same time s Recording through the window of a vehicle
1. Set the power switch to CAMERA mode. 2. Press the MENU ON/OFF button. s The MENU list will appear.
MENU DIS.OFF D.ZOOM.OFF PIP.OFF DISPLAY.ON WHITE BAL.AUTO WL.REMOCON.ON EXIT: MENU
3. Turn the UP/DOWN dial until DIS is highlighted.
MENU DIS.OFF D.ZOOM.OFF PIP.OFF DISPLAY.ON WHITE BAL.AUTO WL.REMOCON.ON EXIT: MENU MENU
4. Press ENTER. s The DIS setting will change. 5. Press MENU ON/OFF button to end the setting. s When the DIS is set, the DIS mark ( ) will displayed on the OSD.
DIS.ON D.ZOOM.OFF PIP.OFF DISPLAY.ON WHITE BAL.AUTO WL.REMOCON.ON EXIT: MENU

Notes:

1. It is recommended to deactivate the DIS function when using a tripod. 2. The DIS function will not operate in DSE mode. 3. The MENU ON/OFF function will not operate in EASY mode.

Page 34

MF/AF (Manual Focus/Auto Focus)
1 The MF/AF function works in CAMERA mode only. 1 In most situations, it is better to use the Automatic Focus feature, as it enables you to concentrate on the creative side of your shooting. 1 Manual focusing may be necessary under certain conditions that make automatic focusing inadequate.

Auto Focusing

1 The AF (Auto Focus) mode is set automatically when you switch on the Power switch. 1 If you are inexperienced with camcorders, we recommend that you use the Auto Focus mode.

Manual Focusing

1 In the following situations, you should obtain better results by adjusting the focus manually. A picture containing several objects, some close to the camcorder, others further away. A person enveloped in fog or surrounded by snow. Very shiny or glossy surfaces like a car. People or objects moving constantly or quickly like an athlete or crowd.

a. b. c. d.

1. Set the power switch to CAMERA mode. 2. Press the MF button. The MF symbol will appear in the viewfinder.
3. Zoom in on the subject to be shot by pushing the ZOOM tab to the T side.

Page 35

4. Turn the UP/DOWN dial up or down until the object is focused. 5. If the picture won't focus, zoom out until it becomes clear.
6. To return to AF(Auto Focus), press the MF button again. The MF symbol will disappear from the viewfinder.
Note: The MF function will not operate in EASY mode.
BLC works in CAMERA mode. Back lighting exists when the subject is darker than the background, such as when: - The subject is placed in front of a window. * BLC off - The person to be shot is wearing white or shiny clothes and is placed against a bright background; the persons face is too dark to distinguish their features. - The subject is outdoors and the background is overcast. - The light source is too bright. - The subject is against a snowy background.

* BLC on

1. Set the power switch to CAMERA mode and press the BLC button. s Normal - BLC - Normal (BLC enhances only the subject). Note: BLC function will not operate in P.AE or EASY mode.

Page 36

PROGRAM AE (Automatic Exposure)
1 The PROGRAM AE function works in CAMERA mode only. 1 The PROGRAM AE modes allow you to adjust shutter speeds and apertures to suit different recording conditions. 1 There are 6 automatic exposure modes. 1. AUTO mode s Auto balance between the subject and the background. s Used in normal conditions. s The shutter speed automatically varies from 1/50 to 1/250 second, depending on the picture. 2. SPORTS mode ( ) s For shooting people or objects moving quickly; you should able to play back the picture in slow motion on an 8 mm VCR or stop on a given image with very little blur. 3. PORTRAIT mode ( ) s For focusing on the subject and not the background. The PORTRAIT mode is most effective when used outdoors. s The shutter speed automatically varies from 1/50 to 1/1000 second, depending on the picture. 4. SPOTLIGHT mode ( ) s To shoot correctly when there is only light on the subject and not the rest of the picture. s The shutter speed is 1/50 second. 5. SAND/SNOW mode ( ) s For shooting when the people or objects are darker than the background because of reflected light from sand or snow. s The shutter speed automatically varies from 1/50 to 1/250 second, depending on the picture. 6. HSS (High Speed Shutter) mode ( ) s For shooting fast-moving subjects such as the players in golf or tennis games. s You may need to light the shooting area.

Page 42

Selecting and Recording a Title
1 Selecting and recording a TITLE is possible in the CAMERA mode only. 1 The TITLE feature allows you to select a preset title stored in the camcorders memory. 1 You can also select the language of the titles.
Selecting a Language and Setting a Title
1 Selecting a language is possible in both STANDBY in CAMERA modes. 1 The factory default language is ENGLISH but you can change the language. 1. Make sure that you have installed the LITHIUM BATTERY or have the adapter attached. 2. Set the power switch to CAMERA mode. 3. Press the MENU ON/OFF button. The MENU list will be displayed.
MENU DIS.OFF D.ZOOM.OFF PIP.OFF DISPLAY.ON WHITE BAL.AUTO WL.REMOCON.ON NEXT: MENU MENU CUSTOM SET CLOCK SET TITLE SET TITLE..OFF D/TITLE COLOUR.WHITE C.RESET.0:00:00 DEMO.OFF EXIT: MENU
4. Turn the UP/DOWN dial until TITLE SET is highlighted.
5. Press ENTER. s Alist of available languages will appear.
LANGUAGE SELECT ENGLISH [HAVING FUN] FRENCH GERMAN ITALIAN SPANISH RUSSIAN EXIT: MENU

Page 43

6. Turn the UP/DOWN dial to select the appropriate language. s You may select from ENGLISH/FRENCH/ GERMAN/ITALIAN/SPANISH/RUSSIAN. 7. Press ENTER. s Then, the title list in the launguage you chose will appear. 8. Turn the UP/DOWN dial to highlight the TITLE you desire. 9. Press ENTER. s The selected title will appear on the screen for 2 ~ 3 seconds and will then disappear. At the same time the camcorder will return to the menu mode.
ANNIVERSARY CONGRATULATIONS GRADUATION HAPPY BIRTHDAY HAPPY NEW YEAR HAVING FUN ENGLISH [HAVING FUN] FRENCH GERMAN ITALIAN SPANISH RUSSIAN

Recording a Title

Note: 1. 2. 3. 4. 5. s Make sure that you have selected a TITLE.
MENU CUSTOM SET CLOCK SET TITLE SET TITLE.CONTINUE D/TITLE COLOUR.WHITE DEMO.OFF EXIT: MENU
Set the power switch to CAMERA mode. Press MENU. Turn the UP/DOWN dial until TITLE.OFF is highlighted. Press ENTER to choose between OFF, AUTO-10S and CONTINUE. Press the START/STOP button to record the title with your recording. s If you want to change the title recording time, select title recording time. Select from: (OFF, AUTO-10S, CONTINUE) on MENU.
Notes: s The title moves horizontally from the right side to the left side 10 seconds after you turn on the title. s The MENU ON/OFF function will not operate in EASY or REC mode.

Page 44

Fade In and Out
1 The FADE function works in CAMERA mode only. 1 You can give your films a professional look by using special effects such as fading in and out at the beginning or end of a sequence.

To Start Recording

1. Before recording, hold down the FADE button. The picture and sound gradually disappear (fade out). 2. Press the START/STOP button and at the same time release the FADE button. Recording starts and the picture and sound gradually appear (fade in).

a. FADE OUT

REC 0:00:15
To Stop Recording (using FADE IN / FADE OUT)
3. When you wish to stop recording, hold down the FADE button. The picture and sound gradually disappear (fade out). 4. When the picture has disappeared, press the START/STOP button to stop recording.

STBY 0:00:20

a. FADE OUT (Approx. 4 seconds)

Press the FADE button

Gradual disappearance
b. FADE IN (Approx. 4 seconds)
Gradual appearance b. FADE IN Release the FADE button
00606F VP-W80/W87 UK (45-64)

2/17/03 11:24 AM

Page 45
PIP (Picture-in-Picture; VP-W87/W87D only)
1 The PIP(Picture-in-Picture) feature works in combination with the DIGITAL ZOOM function by using a small, super imposed screen to show an image that is wider than the image being shot. This should help you to get a more clear idea of what you are shooting. - The PIP function works in CAMERA mode only. 1. Set the power switch to CAMERA mode. 2. Turn on the DIGITAL ZOOM facility. (see page 29)
3. Press the MENU ON/OFF button, the MENU List will be displayed. 4. Turn the UP/DOWN dial until PIP..OFF is highlighted. 5. Press ENTER, the PIP ON and a small screen should appear. 6. Check which part you are shooting on the PIP screen, and move the Zoom button to the T position to activate the DIGITAL ZOOM.
MENU DIS.OFF D.ZOOM.OFF PIP.OFF DISPLAY.ON WHITE BAL.AUTO WL.REMOCON.ON NEXT: MENU
7. Setting PIP.ON to OFF in the MENU will make the small screen disappear and switch the PIP mode off.
DIS.OFF D.ZOOM.OFF PIP.ON DISPLAY.ON WHITE BAL.AUTO WL.REMOCON.ON NEXT: MENU
Notes: s The PIP screen will be recorded if it is activated while recording. s The MENU ON/OFF function will not operate in EASY or REC mode. s PIP function will not operate in DSE mode.

Page 46

1 With the SNAP SHOT feature, your camcorder can function like a normal film camera, allowing you to take single still pictures. - The SNAP SHOT function only operates in the CAMERA mode. 1. Set the power switch to CAMERA mode.
2. Press the SNAP SHOT button when you have the picture you wish to capture. s At this time, be careful not to shake your camcorder because the image will be indistinctly recorded.
3. Once the SNAP SHOT button has been pressed, your camcorder will automatically return to STANDBY mode after approximately 6 seconds. s You can check the remaining available SNAP SHOT space by looking at the time displayed on the screen. s To stop SNAP SHOT shooting, press the SNAP SHOT button again. Notes: s If the camcorder is knocked or shaken while taking a SNAP SHOT, the image may be blurred. s The SNAP SHOT is activated in recording. s When the SNAP SHOT button is pressed in CAMERA mode with no tape installed, a still image will be displayed in the viewfinder.

Page 47

White Balance
1 WHITE BALANCE is a recording function that preserves the unique colour of the object in any shooting condition. 1 You may select the appropriate WHITE BALANCE mode to obtain good quality colour of the image. - AUTO: This mode is generally used to control the WHITE BALANCE automatically. - INDOOR ( ): It controls WHITE BALANCE according to the indoor ambience. - OUTDOOR ( ): It controls WHITE BALANCE according to the outdoor ambience. Setting a White Balance Mode 1. Set the power switch to CAMERA mode. 2. Press the MENU ON/OFF button, then the MENU list will be displayed. 3. Turn the UP/DOWN dial until WHITE BAL.AUTO is highlighted.
4. Press ENTER. s You can set it to INDOOR or OUTDOOR by pressing the ENTER button.
MENU DIS.OFF D.ZOOM.OFF PIP.OFF DISPLAY.ON WHITE BAL.OUTDOOR WL.REMOCON.ON EXIT: MENU
5. Press MENU ON/OFF button to exit the WHITE BALANCE setting screen.
The MENU ON/OFF function will not operate in EASY or REC mode.

Page 48

Demonstration
1 Demonstration automatically shows you the major functions that are included with your camcorder so that you may use them more easily. 1 The DEMO function is only available in CAMERA mode when tape is not in the camcorder. 1 The Demonstration operates repeatedly until the POWER switch is set to OFF.
1. Set the POWER switch to CAMERA mode. 2. Press MENU ON/OFF button, then the MENU list will appear.
MENU CUSTOM SET CLOCK SET TITLE SET TITLE..OFF D/TITLE COLOUR.WHITE DEMO.OFF EXIT: MENU

3. Turn the UP/DOWN dial so that DEMO is highlighted.
4. Press ENTER to select ON. s Demonstration will start.

SAMSUNG

DEMONSTRATION
5. Set the POWER switch to OFF to end the Demonstration. Note: The MENU ON/OFF function will not operate in EASY or REC mode.

Page 49

Advanced Recording
Setting the Date/Title Colour
1. Set the power switch to CAMERA mode. (see page 22) 2. Press the MENU ON/OFF button. s The MENU list will appear.
MENU CUSTOM SET CLOCK SET TITLE SET TITLE..OFF D/TITLE COLOUR.WHITE C.RESET.0:00:00 DEMO.OFF EXIT: MENU
3. Turn the UP/DOWN dial to D/TITLE COLOUR.WHITE.
4. Press ENTER. s A list of available colour will appear.
5. Turn the UP/DOWN dial to select the appropriate colour.
DATE/TITLE COLOUR SELECT [WHITE] WHITE YELLOW CYAN MAGENTA RED GREEN BLUE EXIT: MENU

6. Press ENTER.

DATE/TITLE COLOUR SELECT [YELLOW] WHITE YELLOW CYAN MAGENTA RED GREEN BLUE EXIT: MENU
7. Press the MENU ON/OFF button to end setting. s The title and Date/Time will appear in the colour you chose.

Page 50

Lighting Techniques
1 When you use your camcorder, there are normally only two main recording environments. - You will be shooting outdoors (Normal recording or through an ND (Neutral Density) filter). - You will be shooting indoors (Video light recommended or required). 1 The single greatest influence on picture quality is the level of brightness, measured in lux. 1 The following table lists a few common situations, the corresponding level of brightness and any associated recommendations. Situations x x x x x Snow-covered mountains or fields. Sandy beach on a hot summers day. On a sunny day in the middle of the afternoon. On a gloomy day, an hour after the sunrise. Office with fluorescent lighting near to a window. x On a sunny day, an hour before the sunset. x Department store counter. x Room lit by two 30W fluorescent lights. x Arcade at night. x Candle light. Brightness (lux) 100,000 100,000 35,000 2,000 1,000 1,to 150 to to 15 Recommendations ND filter recommended.

Normal recording.

Video light recommended. Video light required.

After Shooting

1. 2. 3. 4. 5. Eject the tape that you have shot. (see page 22) If you want to protect the tape against accidental erasing, move the red tab on the cassette to cover the hole. Set the POWER switch to OFF. Close the LENS cover. Remove the BATTERY PACK from the camcorder.

Page 56

Using Your Camcorder Abroad
1 Each country or area has its own electric and TV colour system. 1 Before using your camcorder abroad, check the following:

Power sources

s You can use your camcorder in any country or area that uses 100V to 240V, 50/60 Hz. s Were necessary, use a commercially available AC plug adapter, depending on the style of plug used.

Colour system

s You can always view your recordings on the Viewfinder. However, to view a recording on a television or to make a copy to a video cassette recorder, the television or VCR must be PAL: VP-W80U/W80/W87/W87D- compatible and have the appropriate audio/video jacks.
( PAL-compatible area Australia, Austria, Belgium, Bulgaria, China, CIS, Czech Republic, Denmark, Egypt, Finland, France, Germany, Greece, Great Britain, Holland, Hong Kong, Hungary, India, Iran, Iraq, Kuwait, Libya, Malaysia, Mauritius, Rumania, Saudi Arabia, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Syria, Thailand, Tunisia, etc. ( NTSC-compatible area Bahamas, Canada, Central America, Japan, Mexico, Philippines, Korea, Taiwan, United States, etc. Note: You can make recordings with your camcorder anywhere in the world.

2/17/03 11:25 AM

Page 57

Troubleshooting Check

1 Before contacting a service centre, perform the following simple checks. They might save you the time and the expense of an unnecessary call.

Self Diagnosis Display

Display Blinking slow fast TAPE END! TAPE END! TAPE! PROTECTION! D.EMG C.EMG R.EMG L.EMG slow no slow slow slow Inform that. the battery pack is almost discharged. the battery pack is fully discharged. the tape has almost reached its end. the tape reached its end. there is no tape in the camcorder. the tape is protected from recording. the camcorder has some mechanical fault. Action Exchange it with a charged one. Exchange it with a charged battery. Prepare a new one. Change to a new one. Insert a tape. Check the red tab, on the tape. 1. Eject the tape. 2. Set to OFF 3. Detach the battery. 4. Reattach the battery. * Please contact your local authorized service centre if the problem continues. see page 60.

Page 62

-AABROAD...56 AC POWER ADAPTER...18 AF...34 AUDIO..51 AUTO FOCUSING...34 AUTO MODE..36 AUTO POWER OFF...24

-EEASY...31 EJECT..22

-FFADE IN...44 FADE OUT...44 FF (FAST FORWARD)..53 FILTER DIAMETER..61 FOCAL LENGTH...61
-BBATTERY...19 BATTERY LEVEL..21 BATTERY PACK..19 BLC...35

-GGHOST...38

-CCAMERA...18 CASSETTE...22 CASSETTE HOLDER..11 CLEANING...55 CONTENTS...2 CUSTOM...32
-HHAND STRAP..16 Hi8...52
-LLENS...9 LITHIUM BATTERY..17
-DDATE...40 DATE/TIME...40 DC CABLE...18 DEMO..48 DEW...60 DIGITAL ZOOM...29 DIMENSION...61 DIS....33 DISPLAY...12 DSE...38 62
-MMIRROR...38 MOISTURE...60 MONAURAL AUDIO...51 MOSAIC...38
-NND FILTER...50 NEG...38 NTSC...56

Page 63

-OOPERATION MODE...13 OSD...12 START/STOP..23 STILL...53 STOP...52 STROBE...38 SYSTEM...61 S-VIDEO...52
-PPAL....56 PIP...45 PLAY...52 PLAYER...52 PORTRAIT MODE..36 POWER CONSUMPTION..61 POWER REQUIREMENT..61 POWER SWITCH..18 PROGRAM AE...36
-T TAPE COUNTER...13 TAPE EJECT..22 TAPE END...57 TIME...40 TITLE...42 TROUBLE CHECK...58 TV MONITOR...51
-RRECHARGING...19 RECORDING..23 REC SEARCH..24 REMOTE CONTROL..15 REW (REWIND)...53
-V VIDEO..51 VIDEO HEAD...55
-W WAIT-10S...15 WEIGHT...61
-SSAFETY INSTRUCTION...4 SAND/SNOW MODE..36 SELF-30S..15 SELF-END...15 SELF DIAGNOSIS..57 SELF RECORD...15 SELF TIMER..15 SEPIA...38 SHOULDER STRAP..17 SNAP SHOT...46 SPECIFICATION...61 SPORTS MODE..36 SPOTLIGHT MODE...36
-ZZERO RETURN..53 ZOOM...28

Page 64

Power Sources (United Kingdom Only)
The mains lead on the power adapter is supplied with a molded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. IMPORTANT The wires in the mains lead are coloured in accordance with the following code: BLUE = NEUTRAL BROWN = LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows: The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.