You can make high quality voice recordings.
The 3D surround(SRS) feature adds spaciousness to the sound.

Components

Connecting the Necklace

Location of Controls

I Replacing the Player Cover
G Open the groove on the cover with your fingertips, take off the cover and put on another cover of your desired color.
Earphones Black:AH30-00074D White:AH30-00075D
Necklace Black:AH61-01619D White:AH61-01619C

USB Cable AH39-00785A

Necklace Player

Caution

- Take care not to injure your fingertips when you open the cover with your fingertips.
Installation CD AH68-00106B User Manual AH68-01755L

I Resetting the Player

Model Built-in memory YP-F1 V 256MB YP-F1 X 512MB YP-F1 Z 1GB G Take off the Player Cover and press the RESET Hole using a pointed object such as a safety clip.
G The capacity of the useable built-in memory is less than indicated as the internal firmware uses part of the memory as well. G The accessories' design is subject to change for the purpose of improvement, without notice.

RESET Hole

Charging the battery
1 Connect the USB cable to the USB port on your computer.
Volume Control Menu/Navigation Button USB Cable Connection Port, Earphone Port Skip Track/Speed Search Button Skip Track/Speed Search Button Display Microphone (Long) Record Button, (Brief) Loop Repeating Button Power On/Off/ Play/Pause Button Equalizer, SRS Indicator USB Cable
2 Connect the other end of the USB cable to the USB Cable Connection Port on

top of the player.

When recharging is complete, Fully Charged is shown in the display window. Battery recharge time in normal operation is approximately 2 hours and 30 minutes.

I Display

Track Number Play/Stop/Pause Indicator
Play Mode Remaining Battery Power Indicator Title (Track Title and Artist)
- When using the rechargeable battery for the first time or after several months of non-use, fully charge it first. - To avoid the risk of fire, do not charge longer than 12 hours. - Overcharging will reduce the battery life. - The rechargeable battery is a consumable item and its capacity will decrease gradually. - To prolong the life of your battery, use the fully charged battery until it is completely discharged, and then fully charge it again before use. If you charge the battery and it is not completely drained, the battery operating time will decrease. In this case, fully cycle (fully charge and then fully discharge) the battery several times. - If you connect the player through a USB hub, the connection may be unstable. Please connect the player to the computer directly.

Track Progress Indicator

Playtime Indicator
- The screen pictures are for illustration purposes only. The actual screen may differ.
Connecting the Player to Your PC
Make sure to install the USB driver from the Installation CD before connecting the player to your PC. If 'Add Hardware wizard' appears, click the [Cancel] button and install the USB driver.
2 Follow the instructions in the window to complete the installation.

M System Requirements.

The PC system must meet the following specifications:
G Pentium 200MHz or greater G Windows 98 SE/ME/2000/XP G 40MB of available hard disc space G CD-ROM drive (double speed or greater) G USB port (2.0) supported G Direct X 8.0 or above
- Install the operating system in Administrator Account (main user) for Windows 2000 or XP. Otherwise, installation will not be completed. - Windows ME, 2000 and XP can recognize the driver without installing the provided program. However, you must install the program in order to format the player and upgrade firmware. - If the YP-F1 program has not been installed in Windows 98 SE, then it will not communicate with your removable disc. You must install the USB driver file first.

I Installing Software

1 Insert the installation CD into the
CD-ROM drive. Select [Install Player USB Driver].
When the software installation is complete, connect the player to the computer and use it as the following page shows.

Continued.

I Connecting the player to PC with the USB cable
How to check if USB driver is properly installed
Windows 98: Control Panel System Device Manager Disk Drives Samsung YP-F1 Windows 2000/XP: Start Settings Control Panel System Hardware Device Manager Disk Drives Samsung YP-F1 USB Device
1 Connect the USB cable to the USB port on your computer. 2 Connect the other end of the USB cable to the USB Cable Connection Port on
top of the player. G If you disconnect the USB cable from your PC while implementing a command or initializing during USB driver installation, your Player may not function correctly.
3 The USB driver is installed with a message saying that it is searching for a new
device. You may not see the display screen during installation. Go to the Device Manager to check that installation has been successfully completed.

4 When the USB driver is successfully installed, "Samsung YP-F1 USB Device"
will appear in the [System Properties] [Device Manager].

USB Cable

5 When the USB driver is not installed automatically, refer to the next page.
Manual Installation of the USB Driver
If the USB driver has successfully installed, go to "Downloading/Uploading Files"(P19). If the USB driver is not automatically installed, follow the procedures below.
4 After selecting the driver,

click [Update Driver].

5 Click [Next].
I If an error occurs during installation of the USB driver
1 Check the device manager.
Windows 98SE: Control Panel System Device Manager Windows 2000/XP : Control Panel System Hardware Device Manager
2 Check if there is a device listed with an exclamation point or a question mark
(displayed as unknown device or USB device).
6 Select [Search for a suitable driver 7 Click [Next] to finish.
for my device] and then click [Next].
3 Double click on the device listed with an exclamation point or a question mark. Note
- If the USB driver is not automatically installed in Windows 2000, download and install the latest service pack from Windowsupdate.microsoft.com - The installation method may vary depending on the type of PC or operating system. Contact your PC dealer or service center for installation information. - If errors occur continuously when you install the USB driver, reconnect the USB cable after rebooting your system.

I In Windows 98

Open the Add Hardware Wizard in the Control Panel. Follow the instructions in the window to complete the installation.
Using the Player as a Removable Disk
Before formatting can begin, you must connect your YP-F1 to your PC using the USB cable (see page 14).
I Formatting the Player on your PC
1 Select the removable disc icon
and click the right mouse button to select [Format].
2 Press the [Start] button.
G All saved files will be formatted. G You can change the name of removable disc by selecting [Volume label].
USB driver location [CD ROM]USB DriverDrivers
: You must reboot your computer to complete the installation.
- You cannot use it as a removable disc in Windows 98 if the YP-F1 program is not installed. Make sure to install the USB driver file first.

1 Connect the player to PC. 2 Run the Windows Media Player10.
G Select [Start] [Programs] [Windows Media Player] in the desktop.
3 Select [Sync]. 6 You can check the transferred file in

the right window.

- Make sure to use Media Player 9.0 or above to play Secure WMA files downloaded from a pay site.

Installing Music Studio

Music Studio is a program that enables you to play back music files on your PC.

Using Music Studio

2 Select language.

I Playing Music

1 Insert the Installation CD into CD-ROM drive.
Select [Install Samsung Music Studio].
1 Double click the Music Studio icon

Main Window

on your PC.
Play List Window File List Window
3 Follow the instructions in the window to complete the installation.
G Please refer to Help for more in formation on how to use Music Studio.

2 Click the

[Open Files] button in the main window to open the [Open] dialog box and select the music files you want to play back. Then click the [Open] button.
G The Selected files are automatically played back.
- Music Studio does not transfer any files to the MP3 player. Please use Windows Media Player or Drag and Drop to load files to the Player.
You can create an Album that will contain a group of your favorite songs for playback.
4 After creating the New Album, click the
[To HDD Mode] button in the File List Window to select music files stored in your computer.

I Creating an Album

1 Double click the Music Studio icon on your PC. 2 Click the [Album List] button in the Play List Window.
G The Album List Window appears.
5 Drag and drop the selected music files into the Play List Window. 3 Click your right mouse button to select [New Group] which opens the
[New Album] dialog box. Assign a new name and an image for the new album.
G To add an Album image file to your album, click Open to the right of the Album image window and select a desired image from your PC.
- To change the Name and image for an Album, click the [Properties] button in the Play List Window. After bringing up the [Album Properties] window, assign the desired name and image and then press the [OK] button.
You can convert CD Audio tracks to MP3 or WMA(Windows Media Audio) format by using Music Studio.
To View Help on Music Studio
Launch Music Studio and press the F1 key on the keyboard.
G Help will be displayed.
I Converting Music File Formats
1 Double click the Music Studio icon on your PC. 2 Insert an audio CD into your CD drive and click the
button in the File List Window.

[To CD-ROM Mode]

Move the arrow to the top of Music Studio and right click on the mouse. The following selection window will appear.

G Click on Help and the Help window will appear.
3 After selecting the tracks to be converted, click with the right mouse button to

choose the file format.

G The tracks are converted into the selected format.
- Music recognition technology and related data are provided by Gracenote and Gracenote CDDB Music Recognition ServiceSM. - Gradenote and CDDB are the registered trademarks of Gracenote. Gracenote logo and symbol, Gracenote CDDB logo and "Powered by Gracenote" logo are the registered trademarks of Gracenote. Music Recognition Service and MRS are the registered service trademarks of Gracenote.
- Converted files are saved in the folder C:\My Music.

Playing Music

I Turning Power On and Off
Power On : Press and hold the Power Off : Press and hold the button to turn on the power. button to turn off the power.

Recording Voice

To move to other modes from the Voice mode,
refer to page38 Changing Mode.
I Playing Music (Power On)

Press the button.

G Playback starts automatically.
1 Press and hold the REC button for two seconds and then release to start

voice recording.

2 Press the REC button again to stop the recording and save the voice file.
I Pausing Music (Power Off)
Press the button to pause playback.
G If no buttons are pressed within 15 seconds (or custom settings), the player automatically powers off. G While in Pause mode, press the button again to resume playback.
- The files are recorded in the order of V001,V002., and WAV in the VOICE folder after recording. - If the Memory is full, Voice Recording will be disabled automatically. - Voice Recording does not work in FM Mode.

I Adjusting the Volume

Use , to adjust the volume from 00 to 30.
- If the file name is not displayed correctly, move to [Settings] [Language] [ID3-Tag] and then change the language setting. - WMA files can only be played as music files with a compression rate of 48Kbps-192Kbps. - The power off time can be set in the menu. See page 49.
Searching for Music/Voice Files
I To Search for Specific Parts During Play
G Press and hold the , button during playback to search for the part you want to listen to. G Release the button to resume play normally.

Listening to FM Radio

Press and hold the M key. If the menu appears, select FM Radio.
I Manual Search for a Frequency
G Press the , button briefly to to search manually for the frequency you want.
I To Change Tracks During Play
G Press the button briefly during playback to play the next track. G Press the button briefly within 5 seconds after playback starts to move to and play the previous track. Press the button briefly after 5 seconds to play the current track from the beginning.
I Manual Storage of a Frequency

G Press the AB button after moving to the frequency to save. G To save the frequency, set the Preset number by using the , button, and then press the AB button.
I To Change Tracks when Stopped
G Press the , button in stop/pause mode to move to the previous/next track.
I Automatic Search for a Frequency
G Press and hold the , button to search for and stop at frequencies with reception.
- VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according to the type of sounds, such as their pitch, in the file. - When playing a VBR file, you cannot move to and play the previous track even if you press the within 5 seconds after playback starts. - Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3 may not play. - You can change the search speed and skip interval by selecting [Settings] [System] [Search Speed], [Skip Interval].
- To exit from FM mode, press and hold M key. - Mono or Stereo is automatically selected. - To save frequencies automatically, select [Settings] [FM Radio] [Auto Preset].
I Searching Stored Frequencies

Recording FM

1 Press and hold the REC button while receiving FM.
G Recording of the current FM channel begins.
1 Press the M key in the FM mode.

G PRESET screen appears.

2 Press the REC button again.
G A recording file is created and the recording stops. G Files are recorded in the order F001, F002, F003. and saved as MP3 files in FM_ENC folder.

2 Use the

, button to move to the frequency you want.
I Deleting Stored Frequencies
1 After moving to the PRESET number
you want to delete, press the A B button. 2 After selecting YES with the , button, press the M Key.
G The saved PRESET number will be deleted.

Loop Repeating

I Starting Point
While playing music files, press the AB button briefly at the beginning of the loop you want to set. A appears in the display.

I Mute Function

I Ending Point
Press the AB button briefly again to set the end of the loop. AB appears in the display. The loop is played repeatedly. Press the AB button briefly to cancel the loop.
1 Press the 2 Press the Note

button in the FM mode. button again.
G MUTE message appears and no sound will be heard. G Then the Mute function is canceled.
- You can store up to 20 frequencies. - Press the M key in the PRESET screen to exit the PRESET mode.
- The minimum allowed period of time for Loop Repeat is 4 seconds. - Loop Repeat is automatically released if you Speed Search with the

button.

MENU Options
Press and hold the M key to switch to the Menu mode. Use , to move and press the M key briefly to select the menu you want. Press and hold the M key again to exit the MENU mode.

Using Navigation

You can easily search for files or switch modes using the Navigation function.
1 Press the M key to enter Navigation mode or press and hold the M Key to
move to Menu and then select Navigation in Menu.
2 Select the file or folder that you want to play.
Music FM Radio Navigation

Playlist

G : To move to a higher-level folder. G : To move to a lower-level folder. G , : To move to a file or folder in the same directory. G M : Move to the next folder down. When there is no lower folder, the selected file will be designated as part of the playlist.
G Music : To view the file currently playing. G FM Radio : To listen to FM radio. G Navigation : To move to Navigation Mode and browse files and folders. G Playlist : To play back only the files you want. G Settings : To set the functions. (refer to page 41) G Exit : To exit the menu.

3 Press the

G The selected file will be played.
- Menu mode will be cancelled if no buttons are pressed within 20 seconds.
- Press and hold the M key in Navigation mode to exit the Navigation mode.

I Changing Mode

G You can change the mode in the following method. Ex) To change from the Voice mode to the Music mode
I Playing/Exiting Folder [ Playing Folder ]
1 Press the M key in the Voice mode. 2 Use the 3 Use
1 Press the M key to move to the Navigation mode. 2 Use
, to move to the folder you want and press the
" appears, the selected folder will be played.

G When "

button to move to the upper folder.
to move to the music file you want and press the

[ Exiting Folder Play ]

1 Press the M key during folder playback to move to the Navigation mode. 2 Use

, to move to the file you want and press the button.
G After folder play is exited, " " mark will appear and the selected file will be played.
- To change to the FM mode, refer to Menu Options.

Setting Playlist

I Setting Playlist
- Move to the file you want in Navigation mode and press the M key.
G The selected file will be marked and added to the playlist. G To exit the playlist setting, move to the marked file in Navigation mode and press the M key again.
Setting the Advanced Functions
1 Select Settings from the menu. (Refer to "Menu Options") 2 In Settings, use
, to move to the function you want and press the M key to select.
G To move to a previous menu, use
Play Mode Sound Effect Display Play Mode Sound Effect Display

or select Return.

Play Mode Sound Effect Display

I Playing Playlist

FM Radio Time
1 Select Playlist from the menu.
G The playlist you set will be displayed.

File System Return

2 Move to the file you want to play and press the

System Return

mark appears and the selected file will be played.

Selecting the Play mode

I Preset EQ

Sound Settings

Press and hold the M key. Select Settings Sound Effect.
1 Press and hold the M key. Select Settings Play Mode. 2 In Play mode, use
Normal Repeat One Repeat All
, to move to the mode you want and press the M key to select.

Shuffle All Intro Return

G Use , to move to the sound mode you want and then press the M key. G SRS TruBass WOW Normal Classic Jazz Rock User EQ G Select User EQ to set the 5 band EQ as desired (see next page). G SRS : You will hear 3D surround sound. G TruBass : This is a bass boost feature that adds fullness to the sound. G WOW : Consists of SRS and TruBass functions. Provides rich bass and 3D surround sound at the same time.
Normal Classic Jazz Rock User EQ Return
G Normal : To play all the files in order one time. G Repeat One : To repeat one file. G Repeat All : To repeat all files. G Shuffle All : To play files at random. G Intro : To play the first few seconds of a music file. (refer to page 50) G Return : To move to a previous menu.
is a trademark of SRS Labs, Inc. WOW technology is incorporated under license from SRS labs, Inc. - Please adjust the volume to a suitable level, as the volume may increase in the SRS setting. - This unit supports sampling frequencies of 32KHz, 44.1KHz or 48KHz.

I Bass Booster

G Use , to select Bass Booster On or Off and then press theM key. G Bass Booster function is applied only when you select Normal, Classic, Jazz or Rock in the Preset EQ. G On: When the music is played back, the bass is enhanced in the preset sound. G Off: Music is played back in the preset sound. 42

G Use , to select Tag On or Off. G On: Display the Tag information if the music file has Tag information. Display the file name if the music file has no Tag information. G Off: Display the name of music file. 46

On Off

- What is an ID3 Tag ? This is what is attached to an MP3 to carry information relevant to the file, such as the title, artist, album, year, genre and a comment field. - Supported languages can be changed or added.

FM Radio Settings

Press and hold the M key. Select Settings FM Radio. Press and hold the M key. Select Settings Time.

Time Settings

I Auto Off Time
G Use , to set the Auto Off time. G You can select Off 5sec 10sec 15sec 30sec 1min 5min. If no button is pressed after play stops, the player will automatically turn off after the time you set. G When Auto Off is set to Off, the function is disabled.
Other country Korea/US Japan

I Auto Preset

G If you select Auto Preset, frequencies within the range of 87.5MHz to 108.0MHz are automatically selected and stored. G Frequencies are automatically stored, starting from 1.

Auto Off Time

I FM Region
G Use , to select the FM region. G Other Countries : Search FM frequencies between 87.50MHz to 108.00MHz in increments of 50 KHz. G Korea/U.S : Search FM frequencies between 87.5MHz to 108.0MHz in increments of 100 KHz. G Japan: Search FM frequencies between 76.0MHz to 108.0MHz in increments of 100 KHz.

I Auto Sleep

G Use , to set the Sleep Time. G You can select Off 15min 30min 90min 120min. The player will automatically turn off after the time you set. G When Auto sleep set to Off, the function is disabled.

Auto Sleep

- The default FM region setting may vary depending on the target region of the player.

I FM Search Level

G Use , to select the FM tuner sensitivity. G The higher the FM tuner sensitivity, the more frequencies can be received. G Use can select High Middle Low.

High Middle Low

Press and hold the M key. Select Settings Time. Press and hold the M key. Select Settings File.

Managing Files

I Deleting a File

I Time Set

G Select the Time Set to set the current time. If you have selected Clock for Screen Saver, you can view the current time on the screen when the Screen Saver is set. G Use , to set the clock time, and then press the button to move to the next stage. G When the time setting is complete, move to OK by using , and press the M key.

1 Press and hold the M key. Select Settings File Delete. Delete 2 Use , to move to the file you want to delete and

then press the M key.

Confirm Cancel
to move to Confirm and then press the M key.
G The selected file will be deleted.

I Intro Time

G Use , to set the Intro Time. G You can select 10sec 20sec 30sec 60sec. When you select the Intro function(Press and hold the "M" key. Select Settings Play mode Intro), the beginning of all files will be played back for the seconds you set.

Intro Time

I Formatting the Player
1 Press and hold the M key. Select Settings File Format. Format 2 Use , to move to Confirm and then

press the M key.

G The player will be formatted.

Format Cancel

- All files will be deleted when formatting the built-in memory.

Setting the System

Press and hold the M key. Select Settings System.

I Resume

G Use , to select Resume On or Off. G On: Playback will resume from the point it was previously stopped. G Off: Playback will resume from the beginning of the file/track that was playing when stopped.

Resume

I Skip Interval
G Use , to set Skip Interval. G You can select 1Track 5sec 10sec 15sec 30sec 1min. G Skip Interval determines the interval to be skipped when you press the , button in Music mode. G If you set the Skip Interval to 1 Track, if you press the button, the previous or next track will be selected.

Skip Interval

I Default Vol
G Use , to set the default volume to a level between 0 and 30. G If the power is turned on again after having adjusted the volume to a level above the default volume (for example: 20) music is played at the default volume level. G If the power is turned on again after having adjusted the volume at or below the default volume (for example: 20 or lower), the music is replayed at the previous volume.

Default Vol

- For a VBR or Ogg file, the Skip Interval may not be exact.

I Beep

G Use , to select Beep On or Off. G On: The unit beeps when the buttons are pressed. G Off: The unit does not beep.

I Search Speed

G Use , to set Search Speed. G You can select 1sec 3sec 5sec 10sec 15sec 20sec 30sec 1min. G Search Speed determines the speed of search when you press and hold the , button while listening to music.

Search Speed

I About
G If you select About, you can check the software version information, total number of tracks and remaining capacity.
- For a VBR or Ogg file, the Search Speed may not be uniform.
- Go to samsung.com for software updates.

To Upgrade Firmware

1 Connect to http://www.samsung.com, select [SUPPORT] [DOWNLOAD
CENTER] and then select your product.
6 Connect the YP-F1 to your PC with the USB cable.
2 When the product page appears, select [Firmware] below the model name
download the latest firmware.
7 Check the current version and click the [Start] button of the Firmware Updater
program to upgrade the Firmware. G If you select "Format data area" and start the update, all the data saved in YP-F1 will be deleted. Please backup your important data on your PC. If you do not want your data to be deleted, do not select "Format data area".
3 Uncompress the downloaded file in a folder. 4 Run Setup.exe and follow the instructions on the screen for installation.
G If previous version of firmware updater has been installed on your PC, overwrite the firmware files (bootmanager.sb,resource.bin,StmpSys.sb,UsbMsc.sb)in "C:\Program Files\Samsung\YP-F1" folder.
8 Confirm the version of the current firmware. 9 Click the [Close] button.
5 Double-click YP-F1 Updater icon on the Desktop.
G Select [Install Player USB Driver] that appears when you insert the Installation CD into the CD-ROM drive. When the driver is installed, YP-F1 Updater icon is created on the Desktop.

MENU Table

The software doesnt work
G Refer to the System Requirements
Music FM Radio Navigation Playlist Settings Exit

Troubleshooting

The player does not work and the LCD displays nothing.
G Check the battery charge status of the player. G Connect the player to PC and run YP-F1 Updater in the desktop to update the player. G Open the cover of the player and press the RESET hole.
In Play mode, music is not played after pressing the Play button.
G Check to see if MP3 or WMA files are saved in the memory.
Files cannot be downloaded.

Play Mode

Normal Repeat One Repeat All Shuffle All Intro

Sound Effect

Preset EQ Bass Booster WOW Set User EQ Ser

Display

Scroll LCD Time Screen Saver Screen Saver Term Contrast Tag

Language

FM Radio
Auto Preset FM Region FM Search Level
Auto Off Time Auto Sleep Time Set Intro Time

Delete Format

System
Resume Default Vol Search Speed Skip Interval Beep About
G Check to see if the driver is installed correctly in the computer. G Check the USB connectivity between the player and the computer. G Operating system limits the number of files you can save. Please save your music files by creating a subfolder. G Check if the memory is full. G Open the cover of the player and press the RESET hole.
LCD display is invisible.
G Check that the LCD Time setting.
Buttons on the player does not work.
G Open the cover of the player and press the RESET hole.
Use the M key to move and select.
The player is automatically turned off.
G In Stop mode, the power may automatically be turned off depending on settings. G Check to see if there are files saved in it. Model Built-in Memory capacity Voltage Playing time Dimensions/Weight Case Noise Ratio YP-F1

Specifications

256MB(YP-F1 V), 512MB(YP-F1 X), 1GB(YP-F1 Z) 3.7V (Li-polymer) lasts up to 10hours(On the basis of measurement by the company) 1.14" X 2.5" X 0.59" / 1.13 oz Plastic/Steel 92dB with 20KHz LPF
Play Time is not displayed correctly during playback.
G Check to see if the file is a VBR(Variable Bit Rate) file.

LCD display is dark.

G Check the Contrast setting.
The file name and Tag information are not displayed correctly.
G Select [Settings] [Language] [ID3-Tag] from the menu and change the Language setting.
Earphones Jack Output Power 14mW (16) Output Frequency Range Operating Temperature Range FM Frequency FM Signal to Noise Ratio FM T.H.D FM Useable Sensitiivity File Support 20Hz~20KHz -5 ~ +35C(23~95F) 87.5 ~ 108.0 MHz 58dB 1% 10dB MPEG1/2/2.5 Layer3(8Kbps ~ 320Kbps, 8KHz ~ 48KHz) WMA, ASF (48Kbps ~ 192Kbps, 8KHz ~ 48KHz), Ogg
There is a file saved in the player, but No File appears in the screen.
G After checking whether the folder is played, use the Navigation function to change the folder. G Connect the player to the computer and run YP-F1 Updater from the Desktop to update the player. When the Update screen appears, select [Format Data Area] in the Download option and update.
I cannot properly connect the player to the computer.
G Win98 : Try to connect again after installing the driver. G WinME : Remove the driver program and the select the Start and then Windows Update on the Desktop. After selecting important update and service pack, execute update all. G Win2000/XP : Try to connect it again after rebooting the computer.
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. In particular, this product is licensed under the following US patents : 5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and under US Published Patent Application No. 2001-44713-A1. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

Imagine the

Actual size

changing color

Specifications
Built-in Memory capacity Voltage Playing time Dimensions/Weight Case Noise Ratio Earphones Jack Output Power Output Frequency Range Operating Temperature Range FM Frequency FM Signal to Noise Ratio FM T.H.D FM Useable Sensitiivity File Support 256MB(YP-F1 V), 512MB(YP-F1 X), 1GB(YP-F1 Z) 3.7V (Li-polymer) lasts up to 10hours(On the basis of measurement by the company) 1.14" X 2.5" X 0.59" / 1.13 oz Plastic/Steel 92dB with 20KHz LPF 14mW (16 ) 20Hz~20KHz -5 ~ +35C(23~95F) 87.5 ~ 108.0 MHz 58dB 1% 10dB MPEG1/2/2.5 Layer3(8Kbps ~ 320Kbps, 8KHz ~ 48KHz) WMA, ASF (48Kbps ~ 192Kbps, 8KHz ~ 48KHz), Ogg
Samsungs Fashion Creation

of musics

fashion

Interchangeable shells

Whats in a color the foundation of style. The F1 comes equipped with color options. Choose from three color shells that add a light panache or a chic touch to your digital fashion sense.
FM radio A built-in radio lets you listen to the tunes and record your favorite shows easily with auto search and station memory functions. Voice recording A high quality voice recorder makes the F1 a thoughtful friend with handy recall of your notes or feelings. SRS WOW 3D sound Creating a third dimension with only two speakers, SRS WOW adds spaciousness to the sound. Multi-codec MP3, WMA, Audio ASF and Ogg (Ogg Vorbis) are all on the menu with the F1s multi-codec support. USB 2.0 support Transfer in a flash at 24Mbs with the USB 2.0 interface to download of music file in seconds. 10 hours of playback Recharge your built-in Li-polymer battery from a PC to deliver up to 10 hours of music playback.
stylish necklace earphones
The hanging necklace lets you bob and jive while the earphones remain steadfast.

SRS wow

clip-on or hang-out style watch screen saver
Options abound with the style choice of the F1. A handy clip to adorn your collar, belt or pocket is included along with a necklace alternative to hang loose.

2.0 USB

What, a watch too? Sure, with the F1 you can opt for a watch setting or one of two other screen savers for when the LCD light is off to keep you on time as youre entertained.

Imagine

Samsungs Slim Multimedia Sensation
Built-in Memory capacity Built-in Rechargeable Battery Capacity Voltage Dimensions/Weight Case Maximum File Transfer Data Rate Noise Ratio Earphones Jack Output Power Output Frequency Range Operating Temperature Range FM Frequency FM Signal to Noise Ratio FM T.H.D FM Useable Sensitiivity File Support 256MB(YP-T8 V), 512MB(YP-T8 X), YP-T8 Z(1GB), 2GB(YP-T8Q) 850mAh 3.7V (Li-polymer) 44.5 X 83 X 15.5mm / 55g Plastic 120Mbps 90dB with 20kHz LPF (based on 1kHz 0dB) 20mW (16 ) 20Hz~20kHz -5~ +35C(23~95F) 87.5~108.0MHz 45dB 1% 10dB Audio : MP3(MPEG1/2/2.5 Layer3), WMA, Ogg(Q0~Q10) Video : JPEG, BMP, MPEG4(GCIF 10~15 Frame)

Mobile Music and

make it
DNSe surround sound in-hand theater
Ogg and more The T8 supports MP3, WMA, Audio ASF and Ogg playback for a variety of download options. FM radio Tap into the sounds of the built-in radio to listen or record direct from the airwaves.
The sound takes center stage to present musics purity on the move. The T8s DNSe sound engine optimizes sound quality providing richer, more natural effects for a true-to-life surround sound experience.
Voice recording Use the T8s voice recorder to keep thoughts close at hand. Real-time equalizer The T8s equalizer has 21 bands and displays real-time dynamic visuals to assure the best sound quality. Line-in encoding The T8 lets you manage your digital media recording with encoding direct from CDs cassettes and radio into MP3 files. USB 2.0 support The USB 2.0 interface makes downloading music files a snap. At 120 Mbs, it takes only 0.4 seconds to download an average (4M) music file. USB Host Connect your digital devices to transfer sound and image data without a PC. JPEG and text viewer View JPEG images or text files and playback pictures in slideshow format.
Make it fun with the all-in-one multimedia entertainment of the YP-T8. Download your favorite MPEG4 video clips to playback on the eye-popping 1.color TFT LCD and enjoy the show.

G-sensor motion games

It moves with your moves. All-in-one entertainment means that the T8 is tricked out with the most advanced game functionality to take you into the action with extraordinary motion detecting games using G-Sensor technology.

high-speed data transfer

Load and share your digital content in a flash. The T8 let you transfer large media video files or music in a flash with the USB 2.0 host connection racing at about 120 Mbs.
20 hours of playback The built-in rechargeable Li-ion battery delivers sound that lasts for up to 20 hours of listening or 6 hours of video playback on one charge.